1
2
Coim s.r.l. Index 2. Coim s.r.l. 3. Presezzi Extrusion Group 5. Engineering & Production Project Automation Research and Development Start Up 7. Products Gas Fired-Billet Heaters Log Heating Furnaces + Hot Log Shear / Hot Saw Annealing and Heat Treatment Furnaces Turn Key Fully Automatic Vertical Storages for billets and logs, with Data Management System 14. Service 15. Thanks to Our Customers 16. Contacts 3
Coim s.r.l. Gas-fired Billet Heaters - Annealing Furnaces COIM is world leader in designing and manufacturing Gas-Fired Billet Heaters for the extrusion of Copper, Brass and Aluminum. Since 1978 COIM means worldwide excellence and expertise for the most important extruders. Our range of products includes Special Furnaces for Annealing and Heat Treatment of extruded products and tailor-made Automatic Storages for billets. In 1978, some metallurgical technicians from the district of Brescia - Italy (one of the main worldwide) pool their experience to design and build furnaces and machines for the non-ferrous extrusion industries. In the 80S, COIM emerges and specializes in the particular niche market of gas fired heaters and furnaces for preheating and heat treatment of copper, aluminum and relative alloys, developing and improving the design and construction of energy efficient furnaces. In the 90S, COIM undertakes a major expansion, coming to cover much of the Italian market furnaces for brass billets and winning the European market (in particular in Germany). From 2000 the company enthusiastically espouses the philosophy of the founders and helps to further accentuate the distinctive features of COIM products: top quality and energy efficiency, extreme customization, fast and efficacious after sales service, expanding the activity to emerging markets, such as EAST EUROPE and FAR EAST ASIA. 4
Presezzi Extrusion Group Our life for perfect extrusion The creation of the Presezzi Extrusion Group now means that customers can entrust all their extrusion requirements to a single, consolidated industrial reality, whose management dedicates itself to a constant technological growth, supported by the continuous, highly qualified activities in its research and development department. Our objectives: the highest possible level of technical specialization in the field research and development: one of the most important objectives for investments within the group, involving all the best technical and design resources and which has been made the principal objective for all our customers: energy savings, complete software solutions and programs for handling the production process, excellent quality of the finished extruded product as well as a reduction in overheads; the utmost flexibility in the supply of complete turn-key installations as well as standalone units perfect synergy between the realities of the production and service departments within the group; being considered as a candidate as the main contractor in order to simplify the handling of financial matters for the customer as well as ensuring punctual delivery for machinery and complete plants; the capacity to listen to our customers has been one of the main priorities of the group over the years and has enabled us to fulfill the most widespread and varied requirements by customizing, when required, any type of installation to raise the productive standards and final results of the supply. 5
The Group Complete Extrusion Lines Turn key main contractor Extrusion Presses Aluminium, Hard Alloy, Copper and Brass, Shaped profiles, solid profiles, rods and hollow shaped profiles. Scalper system Billets Descaler Intensive cooling Tooling press spare part Revamping of existing press Revamping of existing extrusion plant Automatic wrapping lines Adhesive film application Box preparation Strapping lines Packing line for PVC Complete handling and logistics solutions Automatic Storage system for dies, bundle and baskets Gas-fired billet heaters aluminum, hard alloys, brass, copper and copper alloys Hot logs shears for aluminum logs Hot log saws for aluminum logs Heat treatment furnaces (batch or continuous) for bars, rods and tubes Automatic handling machines and storages for billets and logs 6
Engineering & Production Each project we undertake is a journey to be followed with attention, dedication and professionalism. We take great care to all the construction phases, from technical specifications to full commissioning, to best repay our customers faith in us. Coim is located in the heart of one of the most advanced industrial areas in Europe for metal processing, an excellent site that boasts a high reputation in industrial machine technology. Project All projects within the group are initiated and developed by our widely experienced and highly qualified engineering department using the latest generation of innovative 3D design systems to ensure the utmost quality at each and every stage of the design process. Every project carried by the group out is UNIQUE in as much that it is custom designed according to the customers specific needs. It is followed through at every stagefrom design through production, installation and commissioning by independently operated business departments within the company. 7
Automation Today COIM s.r.l. offers a unique, durable, safe and highly automated range of machinery. All systems are designed to ensure complete flexibility and ease of use. The systems are designed to ensure the full automation of the plants and the machinery and allow a continuous monitoring of the plant operation and efficiency thanks to dedicated software. Automation can be achieved at various levels, depending on the customer needs, starting from management of the single press to the control of the production and the entire extrusion line. Research & development We are convinced that technological innovation requires continuous research to thrive. For this reason, our Research & Development department works round the clock to keep up with the market trends. We interpret RESEARCH as looking to the future and investing in innovation, foreseeing new scenarios and being ready to meet tomorrow s needs today. High production performance and reliability is the mission followed by our staff made up of engineers, draughtsmen and system administrators, always ready to anticipate market needs and ensure maximum product quality. Start Up Due to perfect group organization and synergies, our furnaces are preassembled directly in COIM s.r.l. workshop. This allows our staff to check every detail and achieve excellent results, significantly reducing assembly and start-up time. 8
Products - Gas Fired Billet Heaters COIM s core product is the Gas-Fired Billet Heater, which has made the company famous all over the world. Simply The Best COIM Gas-fired Billet Heaters are universally known as the most performing, efficient and reliable on the market. COIM s Billet Heater represents the absolute excellence in terms of energy efficiency, accuracy of heating, robustness and reliability. Top Energy Efficiency - The Lowest Gas Consumption COIM exclusive heat recover system allows to reach a top level of energy efficiency which is wide over the performances of competitors. 9
Ecologic Choice A lot of our customers got financial incentives by their governments, due to the reduction of exhausts and energy consumptions after the substitution of their old heaters. Excellent Heating Homogeneity - Custom Heating Algorithms Excellent homogeneity of the heat inside (radial homogeneity) and along (longitudinal homogeneity) the billet. COIM heaters can perform excellent taper heating as big added value. Strenght and Lifetime Wide Over the Average The longest- guarantees about lifetime of refractories, heat resistant rolls, burners. The generous dimensions of our heaters and the high quality of the installed components allow a drastic reduction of maintenances frequency and costs. 10
Products - Gas fired Billet Heaters 11
Products - Log Heating Furnaces + Hot Log Shear / Hot Saw For Aluminum, turn-key solutions with our gas-fired heater with hot shear or hot saw for logs, including logs storage, pusher and conveyor to the press. Our shears and saws are characterized by their high solidity and reliability, cut precision and the possibility to work with Programmable Scrap. 12
Products - Annealing and Heat Treatment Furnaces COIM designs and manufactures special furnaces for the Heat Treatment of Copper and Brass Rods, Tubes and Profiles (Annealing, Bright Annealing, Straightening), Aluminum Billets (Homogenization) and Aluminum Bars and Profiles (Ageing and Hardening). COIM has developed its own technology for Roller-Heart Continuous Furnaces (Jet Impingement), also with Vacuum and Inert Gas. Special Solutions for the Heat Treatment Different and custom solutions for the annealing of rods and tubes in copper and copper alloys, for the homogenization of aluminum billet and the ageing of aluminum profiles. Continuous Roller Hearth Furnaces Advanced technology for Continuous Roller Hearth Furnaces, for copper and copper alloys rods and tubes, applying our highly efficient Jet Impingement Technology. 13
Bright Annealing with Vacuum and Inert Gas Large experience both with direct and indirect gas-fired heating; we know and manage bright annealing technology with use of vacuum and inert gases. Aluminum Log Homogenizing Furnaces Highly efficient and reliable Batch Furnaces for the Logs Homogenizing. Ageing Furnaces for Aluminum Profiles Aluminum extruders who choose COIM are quality oriented and pay their investments in terms of productivity, low maintenances costs and top quality of heat treatment. 14
Products- Turn Key Fully Automatic Vertical Storages for billets and logs, with Data Management System Automatic / Intelligent Storages and machine to move and stock billets or extruded products. Custom software for the Billet Data Management, connecting Mes production orders and the company s databases. Brass Billet Automatic Storage - Capacity 6000 Ton n 2 Exit Lines from Continuos Casting Machines n 2 Walking Beam Machines for Singularization n 5 Crane Manipulators with Hydraulic Grippers n 5 Billet Vertical Storages Fully Integrated with Casting Machines and Saws Billet Handling Machines for Up (Down) Streaming Of Billet Heaters High quality Custom machines for the handling and storage of billets and extruded products 15
Service Specialized staff dedicated to any customer need Even after our machines are assembled and commisioned, they are followed and monitored by our Service department, one of our strengths, a team of professionals highly specialized in assisting customers during production. Remote Service Initial customer service is provided via Internet. For this reason, each machine or system is equipped with a modem that guarantees systematic service, constantly monitoring each customer s problem. Remote service allows us to identify problems in real-time and, when possible, resolve situations directly from our facilities, thus saving time and increasing productivity. Mechanical service and Spare Parts Our Service department helps customers find the best solution to any mechanical problem since we are able to provide mechanical spare parts whenever necessary. If on-site service is required, an appointment will be made with our technicians to identify the best corrective measures to be implemented. If, on the other hand, Spare Parts are required, whether standard or special, our staff will be pleased to quickly provide customers with the best estimate for the required parts. 16
Thanks to Our Customers For their contribution to our success since 2000 ALMAG ITALY ALUMERO FINEX EXTRUSION NETHERLANDS ALUTITAN ITALY ANODALL EXTRUSION ITALY ARAB ALUMINUM JORDANY ASB BARBOSA PORTUGAL AURUBIS STOLBERG GERMANY BERNA ERNESTO ITALY CECIL S/A LAMINAÇAO BRASIL DIEHL METALL STIFTUNG GERMANY ELITE EXTRUSION UAE EREDI GNUTTI ITALY ESTRAL ITALY ETEM GREECE FIRAT TURKEY FITCO GREECE GASTALDELLO ITALY GINDRE DUCHAVANY FRANCE HALCOR METAL WORKS GREECE HYDRO ALLUMINIO ITALY KLIL ISRAEL KME SERRAVALLE ITALY KME OSNABRUCK GERMANY KME GIVET FRANCE KME NIEDERBRUCK FRANCE KME BOISTHOREL FRANCE KUZOCM RUSSIA LDM OUTOKUMPU NETHERLANDS METALLI ESTRUSI ITALY METALLURGICA CIDNEO ITALY METALLURGICA SAN MARCO ITALY MUELLER COPPER TUBE USA NINGBO BOWAY CHINA NOVELLINI INDUSTRIES ITALY ORIENTAL COPPER THAILAND PANDOLFO ALLUMINIO ITALY PEGLER UK PENINSULAR DEL LATON SPAIN SAPA EXTRUSION USA SARKUYSAN TURKEY STEELMET BULGARY SWISSMETAL SCHWEIZ VMK RUSSIA WIELAND WERKE GERMANY KME BERLIN GERMANY 17
Contact Us Coim s.r.l. Coim s.r.l. Operation Headquarters: Via del Donatore, 5, 25030 Castelcovati (BS) tel. +39 030 718473 - fax +39 030 718527 C.F. e N R.Imp. 00945240174 P.IVA IT 00590030987 mail: info@coimsrl.net - www.coimsrl.net Registered Office: via Rovereto 1/d - 20871 Vimercate (MB) tel +39 039 635011 - fax +39 039 63501220 USA and CANADA sell and service Bruno Donada Area Manager b.donada@presezziextrusion.com Phone/Fax +1 (847) 676 2459 Presezzi Extrusion Group Contact Presezzi Extrusion S.P.A. via Rovereto 1/d - 20871 Vimercate (MB) tel +39 039 635011 - fax +39 039 63501220 www.presezziextusion.com Profile Automation S.r.l. Operation Headquarters: Via Verdi, 1,2/4A 46032 - Castelbelforte (MN) tel. +39 0376 258050 - fax +39 0376 256009 www.pasrl.com Presezzi Extrusion Group - Head Office Milan - Italy via Rovereto 1/d - 20871 Vimercate (MB) tel +39 039 635011 - fax +39 039 63501220 www.presezziextrusiongroup.com 18
19
20