Remote Controller Manual



Similar documents
CS488-R51I13A

AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION CS457-R14A

Wireless Remote Controller YB1FA

OWNER'S MANUAL R-410A Duct Free Split System Air Conditioner and Heat Pump

LG Wireless Remote Controller

ENGLISH INSTRUCTION & INSTALLATION MANUAL DUCTLESS MINI SPLIT AIR CONDITIONING SYSTEMS

REMOTE CONTROL MANUAL

Split Air Conditioner

Climax Air Inc. DC Inverter Portable Air Conditioner Model VS12 12,000 BTU Introducing The World s Most Efficient Portable Air Conditioner

Split Air Conditioner

Portable Air Conditioner

All about the Use &Care

Instruction manual for Firstline FCS12000CH

and using this appliance and keep this manual for future reference.

USER S MANUAL FH052EAV1 FH070EAV1. System Air Conditioner (Cooling and Heating) ENGLISH ESPAÑOL FRANÇAIS ITALIANO PORTUGUÊS DEUTSCH E HNIKA

NewAir AC-14100E / AC-14100H Portable Air Conditioner Owner s Manual PLEASE READ AND SAVE THESE INSTRUCTIONS

PORTABLE AIR CONDITIONER

OWNER S MANUAL SPLIT SYSTEM AIR CONDITIONER. G Series Cooling

Owner s Manual RBC-AMS41E. Remote controller with weekly timer. Owner s Manual

Before using your air conditioner, please read this manual carefully and keep it for future reference. ROOM AIR CONDITIONER

NewAir AC-10000E, AC-10000H Portable Air Conditioner Owner s Manual PLEASE READ AND SAVE THESE INSTRUCTIONS

AIR CONDITIONER (SPLIT TYPE)

RCS-TM80BG. Contents 4. Weekly Program Function... EG-6 5. Outing Function... EG Sleeping Function... EG-14 XXX XXXX XXXX XXXX XXXX

R410A SPLIT SERIES DC INVERTER

WALL MOUNTED SPLIT TYPE AIR CONDITIONER

RAV-SM307KRTP-E RAV-SM407KRTP-E

The figures in this manual may be different with the material objects, please refer to the material objects for reference.

SAFEGUARDING THE ENVIRONMENT

Operating Instructions Air Conditioner

Operation Manual MODELS FTX20J2V1B FTX25J2V1B FTX35J2V1B DAIKIN ROOM AIR CONDITIONER. English. Deutsch. Français. Nederlands. Español.

USER S MANUAL HSC-24A

CM921 - User Guide. Description. Features. 1 day Wireless Programmable Room Thermostat with LoT technology WHAT IS A PROGRAMMABLE ROOM THERMOSTAT?

Contents. Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

To suit Daikin FDY "F" Series and FD "F" Series. (and other models incorporating BRC1B62/52 Remote Controller)

OMI-09/OMO-09 OMI-12/OMO-12 OMI-18/OMO-18 OMI-24/OMO-24. Wall Mounted Unit

OWNER S MANUAL VMH 09/12/18/27/36 InverterFlex

NewAir AC-10100E / AC-10100H Portable Air Conditioner Owner s Manual PLEASE READ AND SAVE THESE INSTRUCTIONS

Room Air Conditioners

PORTABLE AIR CONDITIONER

CONTENTS 1. IMPORTANT NOTICE 2 2. TECHNICAL SPECIFICATION 3 3. OPERATION DETAILS 4 4. ELECTRICAL SCHEMATIC DIAGRAM EXPLOSION VIEW 16 6

INDOOR UNIT/OUTDOOR UNIT

PORTABLE AIR CONDITIONER (LOCAL)

Important Safeguards

SERVICE INSTRUCTION R410A. SPLIT TYPE ROOM AIR CONDITIONER Universal Floor / Ceiling Duct / Cassette Wall Mounted / Floor type INVERTER MULTI

HIGH-WALL DUCTLESS AIR CONDITIONING SYSTEM

ATS-505. GB Version 1

Split Type Room Air Conditioner. KSWM units

Use and Care Manual. Model CPA12KH AIR CONDITIONER

Important Safety Instructions

HIGH-WALL DUCTLESS AIR CONDITIONING & HEATING SYSTEM OWNER S MANUAL

Control Location. Replacing Battery

CM927 - User Guide. Description. Features. 7 day Wireless Programmable Room Thermostat with LoT Technology WHAT IS A PROGRAMMABLE ROOM THERMOSTAT?

USER INSTRUCTIONS FOR GET PORTABLE 12k BTU AIR CONDITIONER MODEL No. GPACU12HR

CONTENTS 1. IMPORTANT NOTICE 2 2. TECHNICAL SPECIFICATION 3 3. OPERATION DETAILS 4 4. WIRING DIAGRAM EXPLOSION VIEW 12 6.

Programmable Room Thermostat 7 Day (5-2 Day) Models: / Power Supply: Battery / Mains

evo + HIGH-WALL DUCTLESS AIR CONDITIONING & HEATING SYSTEM OWNER S MANUAL Models: GWH09AB-D3DNA2D GWH18AC-D3DNA2D GWH24AC-D3DNA2D

Mode Switch. Fan Switch Menu button Program button

AN500T, AN1000, AN1000T, AN1500, AN1500T AN2000, AN2000T

Drayton Digistat +2RF

york air-conditioning products Residential & VRF News 2015

OPERATING MANUAL MODE D EMPLOI MANUAL DE FUNCIONAMIENTO

Room Air Conditioners

Drayton Digistat +2RF/+3RF

Reverse Cycle Inverter Split System Air Conditioner

Split Air Conditioner

Operating Instructions Air Conditioner

Owner s Manual AIR CONDITIONER (SPLIT TYPE) Indoor Unit RAV-SM564UT-E RAV-SM804UT-E RAV-SM1104UT-E RAV-SM1404UT-E. Model name:

Split Air Conditioner User Manual BK 2600 BK 3500

INDOOR UNIT/OUTDOOR UNIT

SPLIT TYPE AIR CONDITIONER INDOOR UNIT MODEL RAK-18QH8(W) RAK-25QH8(W) RAK-35QH8(W) RAK-50QH8(W) RAK-18QH8(B) RAK-25QH8(B) RAK-35QH8(B) RAK-50QH8(B)

OPERATION MANUAL. Total Heat Exchanger HRV (Heat Reclaim Ventilation) (Ceiling mounted duct type)

Si10-417_C. Pocket Manual. Service Diagnosis SPLIT & MULTI

DR 70 Portable Digital DAB+ and FM Radio Receiver User Manual English Please read carefully before using this product

Portable Evaporative Air Cooler. OWNER S MANUAL Read and save these instructions before use. Model: CL30XC

PANASONIC TROUBLE SHOOTING GUIDE

EVAPORATIVE AIR COOLER INSTRUCTION MANUAL

User Manual THR840DUK Digital Thermostat

Failure code manual. content

Digital Wireless Rain Gauge & Thermometer

using the Remote Touch unit and push knob to select. STEP 5 Select category and push knob to select. Scroll to specific customization setting.

Owner s Guide. ca6554

your comfort. our world. User Guide Altherma HT For your new Daikin Altherma high temperature heat pump

RAV-SM564UT-E RAV-SM804UT-E RAV-SM1104UT-E RAV-SM1404UT-E RAV-SM1604UT-E

User Manual of WT 493

PORTABLE AIR CONDITIONER

Service manual. Website: CAUTION - BEFORE SERVICING THE UNIT, READ THE SAFETY - PRECAUTIONS IN THIS MANUAL.

features of your new air conditioner

LG Room Air Conditioner OWNER'S MANUAL

Please read this owner s Manual carefully before operating the unit. - Cooling - Heating - Dehumidifying - Fan

SERVICE MANUAL FOR 6535 SERIES TWO TON HIGH EFFICIENCY PACKAGED HEAT PUMPS

AIR CONDITIONER OWNER S MANUAL. Please read this manual carefully before operating your set and retain it for future reference.

OPERATION MANUAL DAIKIN ROOM AIR CONDITIONER. English. Deutsch. Français. Nederlands. Español. Italiano. Eλληνικά. Portugues

Model: AC-S13CG x 2. Model No: AC-S13CGx2.doc Version 1.0

SERVICE INSTRUCTION R410A. WALL MOUNTEDtype INVERTER SPLIT TYPE ROOM AIR CONDITIONER. Models Indoor unit Outdoor unit

floater imports DF169 ECO AIR COOLER EVAPORATIVE AIR COOLER WITH IONIZER USER S MANUAL

Portable Evaporative Air Cooler for Indoor Use. OWNER S MANUAL Read and save these instructions before use. Model: CL25AE

Split Air Conditioner

COMPUTHERM Q7 Programmable, digital room thermostat. Operating Instructions

Transcription:

VMFI- / VMFO- Floor Standing Unit Remote Controller Manual Thank you for choosing INVENTOR air conditioning system. For correct use of this unit, please read this manual carefully and keep it for future reference. English

CONTENTS Remote Controller Specification... Performance Features------------------------------------------------------- Features of the Remote controller Buttons... Indicators on Display panel... Operating the Remote Controller... Warning--------------------------------------------------------------------------. Set the starting & stopping time. Push the TIMER ON button, the remote controller will show TIMER ON, the last set time for START operation and the signal "h" will be shown on the DIGITAL display area. You are now ready to readjust the TIMER ON to start the operation.. Push the TIMER ON button again to set the time you want to start the operation.. Push the TIMER OFF button, the remote controller will show TIMER OFF, the last set time for STOP operation and the signal "h" will be shown on the DIGITAL display area. You are now ready to reset the time to STOP operation.. Push the TIMER OFF button again to set the time you want to stop the operation.. After setting the TIMER, there will be a one-half second delay before the remote controller transmits the signal to the Air Conditioner. Then, after approximately another seconds, the signal "h" disappears and the set temperature will re-appear on the digital display. Change the TIMER To change the TIMER ON/OFF time, just press the corresponding TIMER button and reset the time. To cancel the TIMER ON/OFF setting, just adjust the TIMER time to 0:00. The setting time is relative time. That is the time set is based on the delay of the current time. Warning. Be sure there are no obstacles between the remote controller and the receiver of indoor unit otherwise the air conditioner will not work.. Keep the Remote Controller away from any liquids.. Protect the remote controller from the high temperatures and exposure to radiation.. Keep the indoor receiver out of direct sunlight or the Air Conditioner may malfunction.. Keep Remote Controller away from EMI(Electro-Magnetic Interference) supplied by other household appliances.

Remote Controller Specification Model Rated Voltage Transmission Distance Performance Features RM/(C)E, RM/BG(C)E, RGM/(C)E, RGA/(C)E, RGM/(C)E, RGM/BG(C)E, RGM8/(C)E,RGM9/(C)E, RGM/BGE-IN.0V(Dry batteries Lr0 ) 8m - C 0 C ~. Operating Mode: AUTO COOL DRY HEATand FAN.. Timer Setting Function in hours.. Indoor Setting Temperature Range : C~0 C.. Full function of LCD (Liquid Crystal Display) Features of the Remote controller buttons AUTO COOL DRY HEAT SET TEMPERATURE ( C) MODE TEMP Fig. FAN HIGH MED LOW 9 Environment AIR DIRECTION ON/OFF FAN SPEED 8 SWING SLEEP RESET LOCK CLEAN AIR TIMER ON TIMER OFF LED DISPLAY TURBO 0 : : Indicates optional button. and buttons M odels RGM/(C)E., an d buttons are not available for Models RGM/(C)E and RGM/BG(C)E. button is not available for Models of RM/(C)E, RM/BGE, RM/BGE-IN.,,,, buttons Models RGM9/(C)E.,,, buttons Models RGM8/(C)E. 8 9 0 TEMP Button : Push this button to decrease the indoor temperature setting. TEMP Button : Push this button to increase the indoor temperature setting. MODE Selection Button: Each time the button is pressed, the operation mode is shifted in the direction of the arrow: AUTO COOL DRY HEAT FAN Please do not select HEAT mode if the machine you purchased is cooling only type. Heat mode is not supported by the cooling only appliance. SWING Button: Push this switch button to activate auto swing feature of the horizontal louver. Push it again to stop. RESET Button: When you press the recessed RESET button, all current settings are cancelled and the control will return to the initial settings. AIR DIRECTION Button: Press this button to change the swing o angle of the louver. The swing angle of the louver is for each press. When the louver swing at a certain angle which would affect the cooling and heating effect of the air conditioner, it would automatically change the swing direction. No symbol will appear in the display area when press this button. (Not applicable to units without this function). LED DISPLAY Button: Press this button to clear the digit display in the air conditioner, press it again to activate it (Not available for the units without LED display window). FAN SPEED Button: Used to select the Fan Speed in four steps- AUTO LOW MED or HIGH. Each time the button is pressed, the fan speed mode is shifted. ON/OFF Button: Push this button to start operation, push the button again to stop operation. TIMER ON Button: Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed setting in 0 minutes increments. When the setting time displays 0, each press will increase the auto-timed setting 0 minutes increments. To cancel the auto-timed program, simply adjust the auto-on time to 0.0. SLEEP Button: Press this button to go into the Energy-Saving operation mode. Press it again to cancel. This function is only can be used on COOL, HEAT and AUTO mode and maintain the most comfortable temperature for you.

TIMER OFF Button: Press this button to initiate the auto-off time sequence. Each press will increase the auto-timed setting in 0 minutes increments. When the setting time displays 0, each press will increase the auto-timed setting 0 minutes increments. To cancel the auto-timed program, simply adjust the auto-off time to 0.0. LOCK Button: When you press the recessed LOCK button, all current settings are locked in and the remote controller does not accept any operation except that of the LOCK. Press again to cancel the LOCK mode. TURBO Button: Push this button to activate/cancel the Turbo function which enables the unit to reach the preset temperature in the shortest time.on cooling mode, t he unit will blow s trong cooling air with super high fan speed. On heating mode (applicable to the unit adopts PTC only), the PTC will bring fast heating operation. CLEAN AIR Button(on some models): When push this button, the Ionizer or Plasma Dust Collector(depending on models) is energized and will help to remove pollen and impurities from the air. Indicators on Display Panel TRANSMI- SSION Indicator OPERATION MODE Indicator LOCK Indicator TIMER DISPLAY Indicator DIGITAL DISPLAY area Display Panel TIMER ON OFF Fig. ON/OFF Indicator FAN SPEED Indicator DIGITAL DISPLAY area: This area will show the set temperature and, if in the TIMER mode, will show the ON and OFF settings of the TIMER. If in the FAN mode, nothing is appeared. TRANSMISSION Indicator: This indicator flashes one time when remote controller transmits signals to the indoor unit. OPERATION MODE Indicator ON/OFF Indicator: This symbol appears when the unit is turned on by the remote controller, and disappear when the unit is turned off. OPERATION MODE Indicator: When press the MODE button, it shows the current operating mode -- AUTO COOL DRY HEAT (Cooling only model without) mode. LOCK Indicator: LOCK display is displayed by pushing the LOCK button. Push the LOCK button to clear display. TIMER DISPLAY Indicator: This display area shows the settings of the TIMER. That is, if only the starting time of operation is set, it will display the TIMER ON. If only the turning off time of operation is set, it will display the TIMER OFF. If both operations are set, it will show TIMER ON-OFF which indicates you have chosen to set both the starting time and off time. FAN SPEED Indicator: Press the FAN SPEED button to select the desired fan speed setting (Auto-Low-Med-High). You selection will be displayed in the LCD window except the Auto fan speed. : All signs shown in the Fig. is for the purpose of clear presentation. But during the actual operation only the relative functional signs are shown on the display panel. Operating the Remote Controller Install/Replace Batteries The Remote Controller uses two alkaline dry batteries(lr0x).. To install the batteries, slide the back cover of the battery compartment and install the batteries according the direction (+and -)shown on the Remote Controller.. To replace the old batteries, use the same method as mentioned above.. When replacing batteries, do not use old batteries or a different type battery. This may cause the remote control to malfunction.. If you do not use the remote controller for several weeks remove the batteries. Otherwise battery leakage may damage the remote controller.. The average battery life under normal use is about months.. Replace the batteries when there is no answering beep from the indoor unit or if the Transmission Indicator light fails to light.. Do not dispose batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

AUTOMATIC OPERATION. Use the MODE button to select AUTO.. Push the TEMP button to set the desired room temperature. The most comfortable temperature settings are between C o to 8 C.. Push the ON/OFF button to start the air conditioner. The OPE- RATION lamp on the display panel of the indoor unit lights. The FAN SPEED is automatically set and there are no fan speed indicators shown on the display panel of the remote controller.. Push the ON/OFF button again to stop the unit operation.. In the AUTO mode, the air conditioner can logically choose the mode of COOL, FAN and HEAT by sensing the difference between the actual ambient room temperature and the set temperature on the remote controller.. If the AUTO mode is not comfortable for you, the desired mode can be selected manually. COOL/ HEAT (Cooling only model without) and FAN Operation. If the AUTO mode is not comfortable, you may manually over-ride the settings by using COOL, HEAT or FAN modes.. Push the TEMP button to set the desired room temperature. When in COOLING mode, the most comfortable settings are C or above. When in HEATING mode, the most comfortable settings are 8 C or below.. Push the FAN SPEED to select the FAN mode of AUTO, HIGH, MED or LOW.. Push the ON/OFF button, the operation lamp lights and the air conditioner start to operate as your settings. Push the ON/OFF button again to stop this unit operation. The FAN mode can not be used to control the temperature. While in this mode, only steps and may be performed. DRY Operation. Push the MODE button to select DRY.. Push the TEMP button to set the desired temperature from C to 0 C.. Push the ON/OFF button, the OPERATION lamp lights and the air conditioner starts to operate in DRY mode at LOW fan speed. Push the ON/OFF button again to stop this unit operation. Due to the difference of the set temperature of the unit and the actual indoor temperature, the Air Conditioner when in DRY mode will automatically operate many times without running the COOL and FAN mode. TIMER Operation Push TIMER ON button to set the auto- on time and TIMER OFF button to set the auto-off time.. To set the starting time.. Push the TIMER ON button, then the remote controller shows TIMER ON, the last set time for the starting operation and the signal "h" will be shown on the DIGITAL DISPLAY area. You are now ready to reset the time to START the operation.. Push the TIMER ON button again to set desired unit start time.. After setting the TIMER ON,there will be a one-half second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another seconds, the signal "h" disappears and the set temperature will re-appear on the digital display.. To set the stopping time.. Push the TIMER OFF button and the remote controller will show TIMER OFF, the last set time for the stopping operation and the signal "h" will be shown on the DIGITAL DISPLAY area. You are now ready to reset the time of the STOP operation.. Push the TIMER OFF button again to set the time you want to stop the operation.. After setting the TIMER OFF,there will be a one-half second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another seconds, the signal "h" disappears and the set temperature will re-appear on the digital display.