FOOD GRADE INDUSTRIAL OILS & GREASES

FOOD GRADE INDUSTRIAL OILS & GREASES

COMPRESSOR OILS Food Grade Synthetic Compressor Oils Fully synthetic compressor oils formulated from the highest quality polyalphaolefin (PAO) base oils with a superior proprietary additive package to achieve long life. These long life compressor lubricants provide significantly improved wear, oxidation and lubricity over the currently available H1 food grade synthetic oils allowing the service life to increase by 50% to 100%. CRC Food Grade Synthetic Compressor Oils are primarily designed for rotary screw compressors and give a service life of 4,000 plus service hours in good operating conditions. n Outstanding wear and lubricity properties n Less varnish formation n Low pour point & high flash point n Good corrosion protection n Increased oxidative stability n Excellent compatibility with elastomers, seals, plastics, and paints n Complies with FDA 21 CFR 178.3570 H-1 n Rotary Screw Compressors n Rotary Vane Compressors n Centrifugal Compressors n Reciprocating Compressors n Vacuum Pumps 04202 5 gal 04203 55 gal 04206 5 gal 04207 55 gal 32/46 38.8 / 7.3 156 464-58 0.85 68 59.7 / 9.8 150 464-58 0.87 HYDRAULIC OILS Food Grade Synthetic Hydraulic Oils Fully synthetic fluids blended from premium polyalphaolefin (PAO) base oils with superior additives that meet the requirements for demanding industrial hydraulic systems within the food industry. These NSF H1 Registered premium food grade hydraulic fluids are designed as multi-purpose oils to include a wide variety of industrial applications as well as hydraulic systems. n Reduced varnish and deposit build-up n Low evaporation rate n Wide temperature range n Substantial reduction in make-up oil n Anti-wear protection n Excellent compatibility with elastomers, seals, plastics, and paints n Complies with FDA 21 CFR 178.3570 H-1 n Hydraulic Systems n Bearings n Circulating Oil n Vacuum Pumps n Canning n Valves 04212 5 gal 04213 55 gal 04216 5 gal 04217 55 gal 46 46 / 7.9 127 500-55 0.83 68 68.8 / 10.5 141 500-55 0.84 1

Food Grade Hydraulic Oils (Mineral) Food grade hydraulic fluids that are formulated with USP grade white oils. These NSF H1 Registered food grade hydraulic fluids are engineered to meet the demanding requirements of severe hydraulic systems using high pressure and high output pumps. n Complies with FDA 21 CFR 178.3570 H-1 n Excellent compatibility with elastomers, seals, plastics, and paints n Hydraulic Systems n Vacuum Pumps n Wipe Down Oil n Gears n Bearings n Slide Ways & Chains 04222 5 gal 04223 55 gal 04226 5 gal 04227 55 gal 46 48 / 6.7 89 459 3 0.88 68 68 / 9 106 500 3 0.87 GEAR OILS Food Grade Synthetic Gear Oils Fully synthetic food grade gear oils that are formulated from premium polyalphaolefin (PAO) base fluids. These NSF H1 Registered food grade gear oils are engineered to provide superior lubrication protection and include an extra additive to improve gasket and seal characteristics. n Very low pour point n Wide operating temperature range n Extended drain intervals / reduced oil disposal n Excellent compatibility with elastomers, seals, plastics, and paints n Complies with FDA 21 CFR 178.3570 H-1 n Gear Sets n Chains n Bearings n Worm Gears n Circulating Oil 04232 5 gal 04233 55 gal 04236 5 gal 04237 55 gal 04242 5 gal 04243 55 gal 220 225.1 / 23.4 128 504-31 0.85 320 319 / 30.5 132 518-27 0.85 460 461 / 39.1 130 518-17 0.85 2

Food Grade Gear Oils (Mineral) Food grade gear lubricants that are formulated with USP grade white oils. These NSF H1 Registered food grade gear lubricants are engineered to provide superior lubrication protection where food contact may occur. n Made from USP grade white oils n Excellent compatibility with elastomers, seals, plastics, and paints n Complies with FDA 21 CFR 178.3570 H-1 n Gear Sets n Chain Applications n Bearings n Pumps Part Package SAE Viscosity@ Viscosity Flash Pour Specific 04246 5 gal 04247 55 gal 04250 5 gal 04251 55 gal 04254 5 gal 04255 55 gal 90 208 / 18.3 97 374 14 0.88 85W-140 313.4 / 24.9 102 464 10 0.88 140 368 / 28 103 374 0 0.89 AIR TOOL OIL Food Grade Air Tool Oil A fully synthetic food grade oil that is formulated with the highest quality polyalphaolefin (PAO) base oil to meet the lubrication requirements of air line equipment. This NSF H1 Registered lubricant is formulated with high performance antioxidants and anti-wear additives to meet the challenges of industrial environments. This product provides lubrication for all air line equipment used in food processing plants. n Complies with FDA 21 CFR 178.3570 H-1 n Designed specifically for air line lubrication n Provides wear protection n Protects against rust n Air Tools n Air Operated Packaging Equipment n Food Processing Equipment n Air Operated Processing Equipment n Air Operated Knives and Saws 04258 5 gal 32 34 / 6.33 139 473-58 0.83 3

CHAIN LUBES Food Grade Chain Lube A special blend of synthetic lubricants and mineral oil, designed to keep roller drive and conveyor chains lubricated. This NSF H1 Registered formula will penetrate, lubricate and protect moving parts by reducing friction and wear that causes metal fatigue. Regular use of Food Grade Chain Lube will help inhibit corrosion, reduce load stress and greatly extend chain life. n Non-drying film, remains to help lubricate metal surfaces n High temperature stability (Operates effectively in temperatures up to 325 F) n Conveyor Chains n Packaging Equipment n Hoist Chains n Link and Roller Assemblies n Forklift Trucks n Excellent for both Food and Non-Food applications 04269 5 gal 04270 55 gal 100 115 / 12.2 ND >370 8 0.87 Food Grade Synthetic Chain Lube A fully synthetic food grade chain and sprocket oil formulated from polyalphaolefin (PAO) base oil and tackifier to protect a wide variety of equipment. This NSF H1 Registered premium food grade lubricant is developed with high performance antioxidants, anti-wear additives and rust inhibitors to exceed the challenges of modern food-processing equipment and environments. This product provides extended lubrication change intervals and will extend equipment life. n Wide operating temperature range (-5 F to 450 F) n High degree of high temperature corrosion-oxidation stability n Complies with FDA 21 CFR 178.3570 H-1 n Low Temperature Ovens n Hi/Lo Speed Chains n Drive Chains n Mist, Spray, or Drip Lubrication Systems 04264 5 gal 04265 55 gal 100 100 / 8.5 130 460-35 0.85 Food Grade High-Temperature Synthetic Chain Lube A fully synthetic chain lubricant formulated from premium ester-based oils. This NSF H1 Registered premium lubricant is designed for use on chains where excellent thermal stability and reduced deposit formation is required. This proprietary formulation provides a combination of high flash point and low volatility for high temperature applications while still providing performance at low temperatures. This oven chain lubricant provides better load and wear properties than food grade H-1 white petroleum oils or PAOs. n Excellent oxidative and thermal stability n Good water and rust resistance n Complies with FDA 21 CFR 178.3570 H-1 n Oven Chains n Gear Sets n Bearings n Wide operating temperature range (-5 F to 600 F) n Reduced sludge and deposit formation n High flash point Physical Properties next page 4

Food Grade High-Temperature Synthetic Chain Lube Continued 04267 5 gal 04268 55 gal 220 220 / 27.2 143 496-35 0.95 Food Grade Proofer Chain Lube A USP grade white oil based chain lubricant designed for high humidity environments. This premium chain lubricant will not emulsify with water and provides excellent rust protection. CRC Food Grade Proofer Chain Lube has excellent metal wear resistance. n Fortified to protect against oxidation and corrosion n Proofer Boxes n Pin and Roller Chains n Gears n Superior resistance to metal wear n Superior lubricity provides an end to chain kinking or shortening n Conveyor Roller Ball Bearings n Slides n Food Processing 04261 5 gal 04262 55 gal 100 100 / 15 158 370 5 0.87 GREASE Multi-Purpose Food Grade Grease A NLGI 2, food grade aluminum complex thickened lubricating grease. This grease was formulated specifically for the food packaging and processing industry. CRC Multi-Purpose Food Grade Grease provides excellent extreme pressure and anti-wear protection and can be used over a wide range of operating temperatures. n Wide Temperature Range. Provides superior lubrication from -30 F to 300 F n Timken OK Load of 40 Pounds n Excellent anti-wear properties n Will not pound out of bearings and bushings during shock loads n Food Processing & Handling Equipment n Canneries n Dairies n Seamers at high speeds & pressure n Breweries n Carton/Packaging Equipment n Meat Processing Plants Base Oil Part Package NLGI Base Viscosity@ Thickener Number Size Grade Oil 40 C SL35600 14 oz. cart. SL35605 35 lb pail Aluminum 2 Mineral 64-70 SL35607 120 lb keg Complex SL35609 400 lb drum Drop Worked Specific Point F Penetration Gravity 500 265-295 0.89 5

Synthetic Food Grade Grease CRC Synthetic Food Grade Grease is a NLGI 2 lubricating grease formulated with the highest quality synthetic NSF H1 authorized raw materials available. Because this grease has a very high dropping point, it is particularly useful in high temperature applications. This product also performs extremely well in cold temperature applications as the base fluid exhibits a very low pour point. n Resists rust and oxidation n Water wash-down resistant n Wide Temperature Range. Provides superior lubrication from -40 F to 400 F n Food Processing & Handling Equipment n Canneries n Dairies Part Package NLGI Base Number Size Grade Oil SL35610 SL35611 SL35612 SL35613 14 oz. cart. 35 lb pail 120 lb keg 400 lb drum n Breweries n Carton/Packaging Equipment n Meat Processing Plants Base Oil Viscosity@ 40 C Thickener Drop Worked Specific Point F Penetration Gravity 2 PAO 60-65 Silica 650 265-295 0.84 Extreme Duty Food Grade Grease CRC Extreme Duty Food Grade Grease is an NSF H1 Registered, NLGI 2 high performance lubricating grease used where incidental contact with food is a possibility. It also excels in applications where resistance to water washout and broad operating temperatures are absolutely necessary. The formulation of this product provides unsurpassed resistance to extreme pressures and corrosion, including salt spray. CRC Extreme Duty Food Grade Grease also has exceptional mechanical stability even in the presence of water. It contains no heavy metals or other environmentally undesirable additives. n Excellent anti-wear and extreme pressure protection n Resistant to water wash-downs at high temperatures n Timken OK Load of 65 lbs n Wide Temperature Range. Provides superior lubrication from -20 F to 400 F n Food Processing & Handling Equipment n Canneries n Dairies Part Package NLGI Base Number Size Grade Oil SL35615 SL35616 SL35617 SL35618 14 oz. cart. 35 lb pail 120 lb keg 400 lb drum n Breweries n Carton/Packaging Equipment n Meat Processing Plants Base Oil Viscosity@ 40 C Thickener Drop Worked Specific Point F Penetration Gravity Overbased 2 Mineral 100 Calcium 572 265-295 0.95-1.05 Sulfonate 6

CRC Food Grade & Food Industry Products CRC offers a broad product line of NSF Registered MRO chemical products for the food processing industry. For additional details, find our Food Grade Chemical Maintenance Solutions Guide at www.crcindustries.com/ei CRC has been providing innovative solutions to the ever-changing food and beverage industry through revolutionary technology and products of superior quality for more the than 50 years. As an ISO 9001:2008 certified manufacturer, we are committed to continue leading the evolution of maintenance chemicals as it relates to regulatory compliance within the food industry. Our StopLight Food Safety Program was developed to minimize risk and cost and maximize regulatory compliance. Visit our web site today to learn more! Your Best Solution TM CRC Industries, Inc. 885 Louis Drive Warminster, Pennsylvania 18974 Telephone: (215) 674-4300 Facsimile: (800) 272-4560 Customer Service: (800) 272-4620 Technical Assistance: (800) 521-3168 MSDS Faxback System: (215) 442-6260 2011 CRC Industries, Inc. CRC, Sta-Lube, K&W, MaryKate and products denoted with and are trademarks or registered trademarks of CRC Industries, Inc. I0329-BR