CPAP Nasal-Aire II Critical Care Single-use CPAP interface by InnoMed The comfortable, economical solution to non-invasive ventilation! Advantages:. Can be worn for any duration without discomfort-no uncomfortable pressure points on the face. Non-claustrophobic. Promotes patient compliance. Does not interfere with mouth. Built-in swivel. Completely assembled. Small, lightweight design. Saves shelf space. Disposable. Pressure Bleed Port allows pressure monitoring or oxygen entrainment. 5 sizes: Small, Medium, Medium-Plus, Large, X-Large Size Ordering Information Size: Order # Quantity Small #DT-CSM2 10/Box Medium #DT-CMD3 10/Box Med.-Plus #DT-CMP4 10/Box Sizing Gauge Part No. #DT-X2007 Large #DT-CLG5 10/Box X-Large #DT-CXL6 10/Box Something new is in the Aire... MERCURY MEDICAL Page 128 (800) 835-MMED (727) 573-0088 FAX (800) 990-6375
CPAP* MACS is the next generation CPAP system for EMS/ Hospital Use Continuous Positive Airway Pressure (CPAP) for use by mask or endotracheal tube. Indications include Congestive Heart Failure (CHF), Asthma, Acute Respiratory Failure (ARF), Trauma, COPD, Near Drowning or any patient with severe breathing difficulty. MACS supports patients in respiratory distress who would otherwise require intubation. EMS agencies with Mask CPAP protocols have reported a substantial decrease in patient intubations with increased ER stabilization. Benefits for everyone - MACS CPAP system for the patient Demand flow system with minimal wasted oxygen Low patient Work of Breathing (WOB) with peak flow of up to 140 L/min to meet patient needs Calibrated CPAP control for stable pressure delivery Two oxygen levels to give only what is really needed for the healthcare provider Manometer to monitor patient pressure and effort Night visible pressure gauge for patient monitoring Compatible with all end tidal CO 2 monitoring systems Allows in-line medication nebulization Specifications MACS CPAP System Description All pneumatic design and built tough; no batteries required CPAP control allows easy pressure adjustment to match patient requirements Demand flow system with automatic flow triggering; peak flow to 140 L/min Oxygen flow only as needed to match patient effort Pressure displayed on night viewable manometer Gas supply 55 psi + 15 psi oxygen Size 3.5 W x 8 D x 6.75 H (9 cm x 20 cm x 17 cm) Weight 3 lbs (1.35 kg) Classification according to MDD 93/42/EEC: IIb Meets international standards - ASTM F 920-85 Minimum Performance and Safety Requirements for Resuscitators Intended for use with Humans - ISO 10651-5:2006 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators - IEC 60529:2001 Degrees of protection provided by enclosures, level IPX4 Control Settings CPAP 0 to 20 cm H 2 O Oxygen 65% or 100% Specifications are subject to change at any time without notice. for the budget Two oxygen levels - conserve oxygen with 65% setting, double the tank time Standardized inexpensive patient circuits with or without mask and head strap will save on operating costs Non-capital purchasing programs available to fit your budget #DH-58011 Disposable Patient Circuit 10/box Adult/Pediatric 6 Length; Includes Large Adult Facemask and Head-strap. Optional Accessories #DH-21040 Pole Mount Bracket for MACS #DH-21025 MACS Protective Boot with Shoulder Strap #DH-97032 MACS Service Manual #DH-21021 Travel Bag for MACS #DH-21085* Oxygen Hose Coiled 15 Length DISS Female x DISS Female (*Other Configurations Available) #53-4-0050-10 Test Lung, 1000cc *Items on this page may not be available for sale in all states. MERCURY MEDICAL Page 129 (800) 835-MMED (727) 573-0088 FAX (800) 990-6375
CPAP Accessories CPAP MEDICOMP molds the CPAP Nasal Cannulas from soft pliant silicone for the utmost patient comfort. The two short angled tubes insert easily into the infants nostrils. And they can remain in place for prolonged periods without irritation. The CPAP Nasal Cannulas are held in place with the specially designed infant cap shown below. The cap is made with integral cloth ties that attach to corresponding holes in the CPAP Cannula. This unique arrangement holds tubes securely in the infants nostrils while providing patient warmth. The cloth tie design also eliminates the problems of torn skin and pulled hair commonly encountered with adhesive tape attachment methods. Nursing staffs report fewer dislodgments and less patient irritation when using MEDlCOMP s CPAP Nasal Cannula. The MEDICOMP design allows your nursing staff to perform routine care procedures without interrupting CPAP therapy. This frees up staff time. Designed for Single-Patient Use. #EG-MC1001 Small CPAP Nasal Cannula 12/case #EG-MC1002 Medium CPAP Nasal Cannula 12/case #EG-MC1003 Large CPAP Nasal Cannula 12/case #EG-MC1011 Small CPAP Cannula w/cap 12/case #EG-MC1012 Medium CPAP Cannula w/cap 12/case #EG-MC1013 Large CPAP Cannula w/cap 12/case #EG-MC1111 Small/Medium CPAP Cap Only 12/case #EG-MC1212 Large CPAP Cap Only 12/case FLEX-C-PAP System #AF-5-16000 Modified Mapleson D System with Norman elbow allows for addition of oxygen at patient connector Detachable 6-24 expandable tubing with wye for easy access to adjustable PEEP Valve and IL breathing bag Valve on fixed wye connector allows clinician to dial in desired amount of CPAP 7 feet oxygen tubing connects Norman elbow with universal connector Single patient use Individually packaged 10 per case The FLEX-C-PAP system may be used with SHER-I-BRONCH endobronchial tubes to perform one lung ventilation. This product contains natural latex rubber. MERCURY MEDICAL Page 130 (800) 835-MMED (727) 573-0088 FAX (800) 990-6375
CPAP/Infant INCA Infant Nasal CPAP Assembly is the most respected CPAP (Continuous Positive Air Pressure) device among clinicians. INCA can be used with Bubble CPAP enabling you to bring the benefits of Bubble CPAP to neonates in your care. Five incrementally-close, anatomically proportional nasal cannulae sizes for a custom fit Clear, extra-soft cannulae to help maintain tissue integrity Stay-Flex tubing for custom shaping and maximum stability Foam block retainers for secure placement and stability Ordering Information #2627-44-2707 INCA Nasal Cannulae Set 7.5 Fr #2627-44-2709 INCA Nasal Cannulae Set 9 Fr #2627-44-2710 INCA Nasal Cannulae Set 10.5 Fr #2627-44-2712 INCA Nasal Cannulae Set 12 Fr #2627-44-2715 INCA Nasal Cannulae Set 15 Fr #2627-44-0707 INCA Replacement Sections 7.5 Fr #2627-44-0709 INCA Replacement Sections 9 Fr #2627-44-0710 INCA Replacement Sections 10.5 Fr #2627-44-0712 INCA Replacement Sections 12 Fr #2627-44-0715 INCA Replacement Sections 15 Fr The Hudson RCI infant nasal prong continuous positive airway pressure (CPAP) cannula system is designed to reduce trauma associated with the delivery of infant nasal CPAP. Hudson RCI CPAP prongs are available as a system for use with a water seal or spring loaded valve or as a set for use with any mechanical ventilator. Soft anatomically curved prongs minimize nasal septal necrosis Six prong sizes fit a full range of infants (see sizing chart below). Adjustable right-angle connector facilitates positioning of tubing to increase infant comfort Educational videotape available upon request Both systems and sets are individually packaged, 10 per case Infant CPAP System Each system (shown above) includes one cannula, one inspiratory and one expiratory elbow, two 4 ft. lengths of 10mm I.D. corrugated tubing, one 4 ft. pressure monitoring line, one 22mm to 10mm humidifier adapter, one knit cap and two 6 inch sections of Velcro securing tape. Infant CPAP Sets Sets are intended for use with mechanical ventilators and include one cannula, one inspiratory and one expiratory elbow connector, two 10mm to 7.5mm adapters, one knit cap and two 6 inch sections of Velcro securing tape (not shown in photo). CPAP Cannula Sizing Chart & Ordering Information Weight Range Suggested System Set Cannula Size Cat. No. Cat. No. Less than 700 grams 0 #05-1683 #05-1690 700 grams to 1,250 grams 1 #05-1685 #05-1691 1,250 grams to 2,000 grams 2 #05-1686 #05-1692 2,000 grams to 3,000 grams 3 #05-1687 #05-1693 Over 3,000 grams 4 #05-1688 #05-1694 1 to 2 years of age 5 #05-1689 #05-1695 MERCURY MEDICAL Page 131 (800) 835-MMED (727) 573-0088 FAX (800) 990-6375
CPAP/Nasal Infant Nasal CPAP is on the rise As many as ten percent of all babies born in the US can benefit from some degree of breathing support. For some infants treatment is only needed for a few hours while for others it may be needed for several months. CPAP has been widely used with these infants to reduce their work of breathing. Nasal CPAP is growing in popularity because it avoids intubation or tracheotomization, decreases the risk of nosocomial pneumonia; decreases sedation requirements; and improves the ability to tolerate enteral feeds. Fits popular brands of nasal prongs Many babies can benefit from NCPAP including: infants ventilated using real nasal prongs infants weaning from mechanical ventilation premature infants that don t require ventilation infants with an increased work of breathing Proper fit is key to minimizing irritation and trauma to the nares and nasal septum. Cannulaide is sized to fit the cannula. This helps keep the prongs straight and positioned in the nares, away from the sides. The pressure seal is maintained by Cannulaide rather than the infant s nose so there is no need for the prongs to touch the nose. Cannulaide works with leading cannulae to provide a reliable, observable air seal. Cannulaide is translucent to aid in inspecting the condition of the patient s nares, which should be done frequently. A good seal from the first breath is essential to effective nasal CPAP. The Cannulaide nasal seal: fits infants from 400g to 4Kg replaces a seal you may have been making by hand provides a positive seal the first time, every time is sized to fit popular nasal cannulae may reduce irritation of the patient s nose includes special Velcro that is soft and formulated to adhere to silicone rubber cannulae Product # Description Packaging #DR-CA100 Cannulaide Size #0 for babies <700g 25/Bx #DR-CA101 Cannulaide Size #1 for babies 700-1250g 25/Bx #DR-CA102 Cannulaide Size #2 for babies 1250-2000g 25/Bx #DR-CA103 Cannulaide Size #3 for babies 2000-3000g 25/Bx #DR-CA104 Cannulaide Size #4 for babies > 3000g 25/Bx #DR-CA110 Cannulaide Starter Package* 25/Bx *Package contains 10 size #1, 10 size #2, 3 size #3 and 2 size #4 Note: Cannulaide is not available for sale in all states. MERCURY MEDICAL Page 132 (800) 835-MMED (727) 573-0088 FAX (800) 990-6375