INTRODUTION HND PUMPS THE SIMPLEX HND PUMP Pivoting linkage reduces wear for longer pump life. djustable pivot for the absolute lowest handle effort. Large bronze piston for more speed and durability. djustable relief valve for application flexibility and added safety. High efficiency automatic unloading at crossover pressure. Fine threaded, no slip release knob for complete control. ast iron pump body stands up to industrial environments with minimal wear. THE SIMPLEX PLUS Wide Variety Simplex offers the widest selection of hand pump, styles, reservoir sizes, and flow rates to meet your everyday needs. Each pump has specific features that make certain models better suited for particular jobs. Select a hand pump with features that best fit your application. uilt for Rugged Industrial/onstruction Use Shipyards, steel mills, construction sites and weld shops can be rough environments for hand pumps. Simplex's all metal construction withstands real world conditions. Total ontrol of Hand Pump Operation Simplex release valves have a fine pitch screw and man size valve handles for maximum control. heck ball valve design is more reliable than needle valves, and less costly to repair. Lowest Handle Effort Simplex hand pumps have low, back saving handle efforts to reduce operator fatigue & back injury. Highest Oil Displacement Per Stroke More oil per stroke means less handle strokes per job. Simplex pumps have the highest available oil displacement per stroke, in many cases reducing the number of handle strokes as much as 0%. djustable Handle Efforts To Meet Your Needs long with providing the most oil per stroke, Simplex P40 & P00 Series hand pumps are designed with two pivot pin locations. Front pivot allows the highest flow of oil per stroke. Rear pivot provides very low handle effort for repetitive applications at full pressure. Light weight & Easy to arry Use pump locking handle to pickup and go. Easy To Use/uilt To Last Pivot linkage provides uniform handle effort at all points along the arc of the pump handle stroke. The pivot reduces piston side loading for longer pump life. Some pump models have four-way valves for use with double-acting cylinders. Maximum Versatility Simplex portable high performance hand pumps incorporate an external adjustable pressure relief valve for maximum protection in a wide variety of lower pressure applications. Most pumps have mounting holes for secure mounting in fixed applications.
HND PUMPS PROPER SIZE & SELETION PORTLE HND PUMPS HND PUMPS WITH 4 WY VLVES Single Speed ompact Hand Pump: Delivers a constant flow to smaller cylinders or hydraulic powered tools regardless of load. Ideal when light weight and portability are important. HEVY DUTY HND PUMPS Hand Pumps With 4 Way Valves: re used to power double-acting cylinders. PORTLE FOOT PUMP Two-Speed Hand Pump: With the cylinder unloaded, pump delivers a high volume of oil for fast cylinder speed. Once the load is engaged, the pump automatically switches to the high pressure stage. Speed Foot Pump: Great for hands free operation. Spring loaded release valve and pump handle allows the operator to advance, hold and release the load all by foot. PROGRESSIVE FORE HND PUMPS SPEILTY HND PUMPS Progressive Force Hand Pump: Delivers high volume of oil up to a crossover pressure of,000 PSI. Model (P40F & P40DF) are faster and require less handle strokes for applications where force increases steadily throughout the cylinder stroke, such as bending, squeezing or crimping. Specialty Hand Pumps: re perfect for OEM applications or as emergency backup pumps. The pumps were designed to fit in tight spaces and are ideal for fixed bolt down applications.
PROPER SIZE & SELETION HND PUMPS SIZING THE PROPER HND PUMP TO YOUR YLINDER Once you have selected your cylinder, find the required reservoir capacity in the cylinder specification chart, and choose a hand pump with at least 0% more reservoir capacity per cylinder. EXMPLE n R-6 cylinder (page ) has a required oil capacity of. cu. in. The P-4 hand pump (page 4) with a reservoir capacity of 4 cu. in. can pump this cylinder to its full stroke. If two R-6 cylinders are to be raised, use a P-40 with a reservoir capacity of 40 cu. in. /4" I.D. hose requires.6 cu. in. oil per foot. /" I.D. hose requires. cu. in. per foot. TYPE OF YLINDERS Most hand pumps are designed to operate single-acting cylinders. Hand pumps with 4-way valves can operate double-acting cylinders. QUIK REFERENE HRT Use this chart to match the appropriate size hand pump to your single-acting Simplex cylinders. Match your cylinder capacity (across the top) with the cylinder strokes listed (in the left hand column). The intersecting box will give you the recommended hand pump for general applications. YLINDER STROKE 0 0 YLINDER PITY (TONS) 0 0/ 60 00 0 4 6 9 0 4 P4 P4 P4 P-P40 P4 HND PUMP/YLINDER SPEED HRT P-P40 P-P40 P-P40 P-P40 P-P40 P-P40 P-P40 P0 P-P40 P-P40 P-P40 P0 P0 P0 P40 P0 P00 P46 For higher speeds, use power pumps to operate multiple cylinder systems or long stroke cylinders over 0 tons. Use this chart to determine the number of full pump handle strokes required to extend a Simplex cylinder ". You may take handle stroke per inch and multiply it by the cylinder stroke to determine the number of strokes required to fully extend the cylinder. HND PUMP MODEL NO. STROKES PER INH OF YLINDER TRVEL 0 0 YLINDER PITY (TONS) 0 0/ 60 00 P4/ P0 P0// F/P P40 P00 P0 P46 NO LOD LOD NO LOD LOD NO LOD LOD NO LOD LOD 4 0 4 4 6 6 4 4 4 4 4 4 4 46 4 06 06 0 06 6 66 4 6 6 0
HND PUMPS LIGHT WEIGHT HND PUMPS Simplex Hand Pumps re Light Weight & Easy To Use. P0 P0 P 6.9 Dimensions for F / NPTF Outlet Port Dimensions for P0, P, P4,, P, P0 & P0V E D G.4.6 F.6..4.9 / - NPTF Outlet Port Light Weight Hand Pumps For Single-cting ylinders NEW!! NEW!! Model Number P0 P P4 F P0 *P0V P Speed Pressure Rating (PSI) Stage 00 Stage,0 Stage 00. 0 Stage 0,000.06 0,000.6 4 Stage 00 Stage 0,000 Stage 00 Stage 0,000 *Equipped with Viton seals. Oil Volume Per Stroke (cu in)..6..6..6 Usable Oil apacity (cu in) / / /4 /4 / D / --- --- E Slot Size / / / 9/ 9/ --- --- F /4 /4 /4 G /4 4 /4 0,000.6 0 / / 4 /4 / 6 4 See Drawing of F bove This hart /4 /4 /4 Weight (lbs) 4 / / / 6 / /4 4 0 4
LIGHT WEIGHT HND PUMPS HND PUMPS NEW!! F This forms manufacturer uses Simplex hand pumps and cylinders mounted to the structure for fine positioning. "We needed a hand pump that was easy to use and reliable. Simplex P4 hand pump is the preferred choice. Hydraulic ylinders pgs. 0-9 Hoses pgs. 0- ccessories & Fittings pgs. 6- Simplex hand pumps are widely known for their rugged construction and low, back saving handle efforts. hoose these hand pumps for maximum portability and light weight. ll metal construction and man size release knobs make these pumps truly industrial grade tools. Models for maximum versatility. Light weight for maximum portability. ll metal construction for durability. arrying handles for easy pick-up. External adjustable relief valve. Low handle effort for easy operation. Single or two speed models. /" NPTF outlet ports. P0V is equipped with Viton Seals. F is foot operated. NEW!! P Simplex hand pumps can power a wide variety of hydraulic cylinders and tools. Light weight and portable, yet heavy duty, Simplex hand pumps are perfect for every manual pump application.
HND PUMPS HEVY DUTY HND PUMPS Simplex Hand Pumps Set New Safety & Performance Standards. Simplex Hand Pumps have low back saving handle efforts. P40 P40D 0 Models. Low, back saving handle effort. High displacements of oil per stroke. djustable handle effort / dual pivot points. Heavy duty, all metal construction for durability. Handle latch for easy carrying. Large, easy fill reservoirs. External adjustable relief valves. P0. Dia. Holes P46D P40, P40F & P00 Series / P0 & P46 Series / / / / /" NPTF /64 0 / /6 / - NPTF Outlet Port Two Speed Hand Pumps For Single & Double cting ylinders 6 Model Number P40 P00 P0 P46 P40F P40DF P40D P00D P0D P46D Type of yl. Single cting Double cting Pressure Rating (PSI) Stage 400 Stage 0,000 Stage 000 Stage 0,000 Stage 400 Stage 0,000 Oil Volume Per Stroke (cu in)..4....4..4.. Usable Oil apacity (cu in) 0 00 0 460 0 00 0 460 4 /6 / / 4 /6 9 / 9 / /6 / /4 /4 /4 / / 4 /6 /4 /6 6 / 9 /6 /6 /6 6 / 9 Weight (lbs) 6 49 6 0 4 49 6
HEVY DUTY HND PUMPS HND PUMPS Simplex combined high flows and low handle efforts in these larger, high performance hand pumps. Low handle efforts and fast advance are achieved through an adjustable handle pivot. In the normal setting, these pumps supply maximum flow, reducing the number of required handle strokes. For tough jobs at maximum pressure, adjust the pivot point and reduce the handle effort by 0%. (P40 and P00 Series only). Hydraulic ylinders pgs.-9 Hoses pgs. 0- ccessories & Fittings pgs. 6- NO JO IS TOO TOUGH FOR SIMPLEX HEVY DUTY HND PUMPS When US recovery teams needed to dismantle and remove a downed US Navy EP- surveillance plane from Hainan Island, hina, they used Simplex P40 hand pumps and 0 ton cylinders. We had a short time frame to complete a large job; Simplex hand pumps and cylinders gave us the speed and power we needed to get the job done.
HND PUMPS SPEIL PPLITION PUMPS uild Them Into Hydraulic Systems, Or Use Them as Standby Or ack-up Pumps. P60 P000- P000-4 P For those special applications that require tight mounting space, backup manual power or lower pressure & high flows, these special hand pumps are what you've been looking for. Ideal for fixed applications when pumps need to be bolted in place. The P-60 Series fits in an " x " space, yet still delivers 4 cu. in. of oil. The P- Series can be mounted vertically (head down) and the P-000 Series can be tapped into existing system reservoirs. ll metal construction, plated pistons, light weight and high flow make these pumps the right choice for long life and trouble free duty. ll pumps have /" NPTF ports. /4 4 /4 /4 /6 Dia. 4 Holes / / 9 / P Series /4 Special pplication Hand Pumps Model Number Usable Reservoir apacity (cu. in.) 4 4 4 0 0 0 Operating Pressure (psi) Volume/ Stroke (cu. in.) Maximum Handle Effort (lbs.) 9 9 9 9 9 9 06 9 P60- P60-4 P60-6 P- P-4 P-6 P000- P000-4 P000-6 P000- P000-,000 6,00,000,000 6,00,000,000 6,00,000,00 0 0.6 0. 0.66 0.6 0. 0.66 0.6 0. 0.66.0.0 Note: ontact factory for dimensional information on the P000-. Weight (lbs.) 9 4 /4 /4 /6 / 6 / /- 6 N Thd. Holes /6 / / /6 / /4 4 4 / 0 /6 9 /6 P60 Series 6 / 9/6 Dia. 4 Holes P000 Series