Andrew Leach Innovation Manager (Project Manager) SC Johnson, Manufacturing Frimley Green, UK



Similar documents
Chemical Reactions Practice Test

Oxygen Give and Take. Correlation to National Science Education Standards

OFM-TG Office of the Fire Marshal F M. Handling Flammable and Combustible Liquids in School Laboratories GUIDELINE

Remember the best arguments are based on the strongest evidence and can explain why opposing arguments are incorrect.

Chapter 16: Tests for ions and gases

Continuous flow direct water heating for potable hot water

General Chemistry I (FC, 09-10) Lab #3: The Empirical Formula of a Compound. Introduction

Reaction of Potassium Permanganate and Glycerin.

The Empirical Formula of a Compound

Candle Flame in Microgravity

Policy on Monitoring of Stack Emissions to Air at EPA Licensed Sites

Honors Chemistry: Unit 6 Test Stoichiometry PRACTICE TEST ANSWER KEY Page 1. A chemical equation. (C-4.4)

Teacher Demo: Photosynthesis and Respiration: Complementary Processes

Color Coded Labeling System for Storing Chemicals in your Laboratory

Training Requirements for the Revised Hazard Communication Standard

HAZARD COMMUNICATION: NEW LABEL ELEMENTS AND SAFETY DATA SHEET (SDS) FORMAT

A.17. OXIDIZING PROPERTIES (SOLIDS)

CHAPTER 3: MATTER. Active Learning Questions: 1-6, 9, 13-14; End-of-Chapter Questions: 1-18, 20, 24-32, 38-42, 44, 49-52, 55-56, 61-64

Safety Data Sheet Aluminium profiles Apply for alloys Sapa EN AW 6060, 6063, 6005, 6005A, 6082, yellow chromated, with or without powder coating.

Examination syllabuses for Manual Stack emissions monitoring. Environment Agency Version 9 January 2015

Chemical versus Physical Changes

CIMAC Guideline

KS3 Science: Chemistry Contents

Chemical Changes. Measuring a Chemical Reaction. Name(s)

Halogen Free: What, Why and How. Presented by : Jim Cronin Environmental Monitoring and Technologies, Inc.

Luminol Test PROCESS SKILLS SCIENCE TOPICS VOCABULARY

MATERIAL SAFETY DATA SHEET

EACH CLASS of fire A, B, C, or D has a different source. Some

Take care with oxygen Fire and explosion hazards in the use of oxygen

Home Product Testing

THE HUMIDITY/MOISTURE HANDBOOK

GCSE Chemistry Quiz Chemical Reactions

Compressed Gas Cylinder Program

VENTURA COUNTY AIR POLLUTION CONTROL DISTRICT 669 County Square Drive, Ventura CA / FAX 805/

CONE CALORIMETER A TOOL FOR MEASURING HEAT RELEASE RATE

The Finnish Classification of Indoor Environment and Material Emissions

CHM220 Addition lab. Experiment: Reactions of alkanes, alkenes, and cycloalkenes*

COMBUSTION. In order to operate a heat engine we need a hot source together with a cold sink

Control Device Requirements Charts For Oil and Gas Handling and Production Facilities

R-32. The next generation refrigerant for air conditioners and heat pumps

Technologies Gas extinguishing systems. MX 1230 Fire Extinguishing Systems Fighting Fire using 3M Novec 1230

Paper 1 (7405/1): Inorganic and Physical Chemistry Mark scheme

This brochure is a guide on how to use your wood heater to maximise the heat obtained from your wood and reduce woodsmoke pollution.

LESSON PLAN 1. Fire Science. Key Terms and Concepts. ash chemical reaction combustion Consumer Product Safety Commission endothermic exothermic

Biology for Science Majors

This leaflet provides information on

ASK THE EXPERT: Burner Troubleshooting Information & Maintenance

SIBIR MANUAL V110 KE. English page 5 RKE - 1D

Technical Solutions for Emissions Reduction

PHARMACEUTICAL AND CHEMICAL WASTE MANAGEMENT

SAFETY DATA SHEET. according to 1907/2006/EC, Article 31 CYTOFIXX (CYTOLOGICAL FIXATIVE)

WARNING NOTICE. Chemiluminescence What s inside of a light stick anyway?

Module 5: Combustion Technology. Lecture 33: Combustion air calculation

Compressed Gas Cylinder Safety

Publishable Summary for the project Safety and quality assurance along the pellets supply chain SafePellets

Alarm and Detection/Suppression

Globally Harmonized System Pictogram Reference Table

Safety signs and symbols

CHEMICAL FORMULA COEFFICIENTS AND SUBSCRIPTS. Chapter 3: Molecular analysis 3O 2 2O 3

CHEM 101/105 Numbers and mass / Counting and weighing Lect-03

PEROXIDE SAFETY DATA SHEET (60% H2O2) Safety Data Sheet

Chapter 6, Lesson 4: Temperature and the Rate of a Chemical Reaction

PREPARATION FOR CHEMISTRY LAB: COMBUSTION

ILLUSTRATIVE EXAMPLE: Given: A = 3 and B = 4 if we now want the value of C=? C = = = 25 or 2

Lesson Plan Classic Candle Experiment

Determination of the Empirical Formula of Magnesium Oxide

Fire Performance Standard

FDNY C14 Certificate of Fitness Quiz

Exhaust emissions of a single cylinder diesel. engine with addition of ethanol

KIRKLEES. Visions and Strategies related to Energy and Climate Issues

Chem 31 Fall Chapter 3. Stoichiometry: Calculations with Chemical Formulas and Equations. Writing and Balancing Chemical Equations

The Globally Harmonized System and OSHA Hazard Communication Revision

GUIDELINE 5. CLASSES OF FIRE, TYPES OF PORTABLE FIRE EXTINGUISHERS, INSPECTION & MAINTENANCE OF FIRE EXTINGUISHERS IN UNIVERSITY BUILDINGS

Material Safety Data Sheet

REVISION NO : 3 August 2010

Safe Method: Gas Safety in Catering Establishments

NITROGEN OXIDES FORMATION in combustion processes COMBUSTION AND FUELS

exit routes and fire protection

Enzyme Pre-Lab. Using the Enzyme worksheet and Enzyme lab handout answer the Pre-Lab questions the pre-lab must be complete before beginning the lab.

The burning candle. Overview. Aims. Teaching sequence. Experiments about plant growth MODULE 1

San josé OWNER S MANUAL

advice (show the label where possible).

Fire Risk Assessment Safety Checklist

O o. Thomas Jefferson National Accelerator Facility - Office of Science Education

MOLES, MOLECULES, FORMULAS. Part I: What Is a Mole And Why Are Chemists Interested in It?

Lecture 35: Atmosphere in Furnaces

Assignment 8: Comparison of gasification, pyrolysis and combustion

Hot Tips For cleaner wood heating. A guide to using your woodheater for maximum heat and minimum pollution

EXPERIMENT 12: Empirical Formula of a Compound

Certain specific properties of compressed gases make them highly useful in various research activities.

Energy Content of Fuels

Q1. A student studied the reaction between dilute hydrochloric acid and an excess of calcium carbonate.

Nu G Medical Waste System Technology (Pyrolysis / Thermal Decomposition)

Safety Data Sheet. Product #: Aspira Scientific 521 Cottonwood Dr. Milpitas, CA

Status: , 10:33 1

Fire safety. protect your caravan or mobile home from fire PROTECT YOUR HOME FROM FIRE

Manufacturer/supplier information. Street/postbox: P.O. Box 15408

How To Test For Premer Retardant

Unit 6 The Mole Concept

General Chemistry Lab Experiment 6 Types of Chemical Reaction

Transcription:

CANDLE STANDARDS A view from Europe Andrew Leach Innovation Manager (Project Manager) SC Johnson, Manufacturing Frimley Green, UK Member of Board and Technical Committee of the Association of European Candle Manufacturers Member of Task Force CEN/BT/TF164 Candle Safety EUROPE? Europe consists of a large number of different countries, with different languages, different cultures, different legal structures. 27 of those countries have joined to form the European Union. The European Union is a complex organisation! CEN is the organisation which co-ordinates the issuance of standards across 30 countries. The members of CEN are the National Standards Bodies of those 30 countries. 2 1

3 CEN CANDLE STANDARDS There are 3 CEN Candle Standards: EN 15494 Candles Product Safety Labels EN 15493 Candles Specification for Fire Safety EN 15426 Candles Specification for Sooting Behaviour As with ASTM standards they are developed by debate between manufacturers, testing laboratories, suppliers, regulatory authorities and other interested parties. Consensus is required within the working group. The final documents have to be approved by the 30 standards bodies which make up CEN As with ASTM standards, they are voluntary, but. 4 2

The General Product Safety Directive - GPSD The GPSD covers all consumer products not covered by other specific regulations. The GPSD requires products to be safe. does not present any risk or only the minimum risks compatible with the product s use, considered to be acceptable and consistent with a high level of protection for the safety and health of persons. The GPSD places the onus on manufacturers and distributors to ensure the safety of products. Primarily this should be done using risk assessments. Compliance with CEN standards is encouraged, where those standards are applicable. Compliance with other standards (such as ASTM) is encouraged, particularly where there is no appropriate CEN Standard Glass jars? Candle Accessories? 5 RAPEX The European database of product recalls RAPEX was created in 2005 to allow the EU enforcement authorities to share data about product recalls across the 27 countries. It is a public database and is easy to access and search. It is located at: http://ec.europa.eu/consumers/safety/rapex/index_en.htm You can see that some recalls already mention non compliance with EN 15493. You should also notice that several recalls quote non compliance with Directive 87/357/EEC by Imitating Food. Many EU countries are strict about this. 6 3

EN 15494. Candles Product Safety Labels. Requires labelling to be visible and legible but does not restrict where it has to placed. If appropriate can be provided at point of sale in form of a leaflet. Allows use of agreed phrases or pictograms. Requires use of General Warning Sign (in accordance with ISO 3864-2) Yellow background is recommended. Warnings may be in form of: Words Supplementary safety information text. Pictograms Supplementary safety information symbol Pictograms are based on those which have been used in Europe for many years. 7 EN 15494. Candles Product Safety Labels. There are 4 mandatory warnings: Never leave a burning candle unattended. Burn candle out of the reach of children and pets. Always leave at least xx cm between burning candles. Do not burn candles on or near anything that can catch fire. 8 4

EN 15494. Candles Product Safety Labels. There are 11 optional warnings - to be selected according to risk assessment. (Please don t use them all on one candle!!!) Do not place candles in a draught Do not place candles near a source of heat. Place candles in an upright position. Trim wick to about 1 cm before lighting 9 EN 15494. Candles Product Safety Labels. There are 11 optional warnings - to be selected according to risk assessment. (Please don t use them all on one candle!!!) Always snuff out the flame. Do not blow it out. Always use a candleholder Keep the wax pool clear of matches and other debris to avoid flaring Only use tea light in holders and warming stoves with sufficient ventilation. 5

EN 15494. Candles Product Safety Labels. There are 11 optional warnings - to be selected according to risk assessment. (Please don t use them all on one candle!!!) Do not move a burning candle. Use a suitable container as these candles liquify when burning. Never use liquid to extinguish. 11 EN 15493. Candles Specification for Fire Safety Is broadly similar to ASTM F2417 Generally 4 hour burn cycles this was decided specifically to match F2417. Spacing of candles during test should match the manufacturer s instructions required in EN 15494. Lower flame height requirement for tea-lights (30mm) Extra requirement The wick shall not continue to glow or smoke for more than 20 s after extinguishing. After extinguishing the candle the candle shall not spontaneously re-light 12 6

EN 15426 Candles Specification for Sooting Behaviour This European Standard describes the requirements and a simple method for measuring the sooting behaviour of candles. The soot index obtained by this procedure may be considered as characteristic of the sooting behaviour of the type of candle tested. The soot which is emitted from a candle is collected on a glass plate throughout a defined period. Afterwards the attenuation of light intensity caused by soot precipitation is quantified in a measuring chamber This methods helps to ensure a reasonable degree of safety for normal use, thereby improving personal safety. 13 Why test for soot? Lets look at the Flame. CO 2 H 2 O O 2 Zone 4. Non-Luminous Zone: O 2 surplus Oxidation of soot particles Zone 3. Light Yellow, bright zone; pyrolysis progresses, soot particles increase Zone 2. Dark Zone, pyrolysis, formation of primary soot particles Wick burns and is slowly consumed. Zone 1. bright blue zone: O 2 surplus, paraffin wax burns Non-luminous zone: paraffin wax evaporates Liquid paraffin wax is drawn up the wick 14 7

Why test for soot? The Chemistry CO 2 H 2 O 15 Why test for soot? The Physics CO 2 H 2 O All of these processes require heat. In addition the carbon has to be heated until it is incandescent and can be oxidised. So, what is the primary source of this energy? Reaction of Oxygen with Hydrogen and the Incandescent Carbon 16 8

Complete Combustion The system (formula, shape, wick) is under control. Sufficient energy has been created to raise all the soot to incandescence so it can be oxidised. 17 Incomplete Combustion The wick is too big/strong, so that the fuel flow is too great? There is insufficient energy to raise the soot to incandescence (1000 o C)? Draught? The ratio of hydrogen to carbon is too low? Too many complex molecules in the fuel, requiring extra energy for pyrolysis? There is incomplete combustion. The system is not in control. 18 9

How to measure soot just look! borderline case good bad 19 non sooting low sooting sooting How to measure soot White Tile White Card White paper Compare level of grey against a standard scale. Largely replaced by ASTM and EN standards, but still valid. 20 10

How to measure soot ASTM F 2326-04 (REAPPROVED 2009) STANDARD SPECIFICATION FOR COLLECTION AND ANALYSIS OF VISIBLE EMISSIONS FROM CANDLES AS THEY BURN 21 How to measure soot wire mesh EN 15426 glass - 2007 plate detector unit cylinder Candles Specification for sooting behaviour. closed open 22 11

How to measure soot EN 15426-2007 Candles Specification for sooting behaviour. Defines a method which is similar in principle to ASTM F2326 04 BUT, also includes a specification for a pass/fail: A Soot Index of 1 per hour. 23 What does a soot index of 1/hour look like? good Soot Index < 1/h borderline case Soot Index 1/h 1.5/h bad Soot Index > 1.5/h 24 non sooting low sooting sooting 12

What does that look like on the glass plate? 25 How to measure emissions 26 13

Fifth The Ökometric Study into Emissions from Candles. V 27 Standard vs. Sooting Candles Composition and Soot Index Standard Candles Wax IGI Paraflex 4786 Wick WEDO LX10 Burn rate 4.2 gr.hr Soot Index 0.3 Wax NatureWax C3 Wick WEDO ECO2 Burn rate 4.2 gr/hr Soot Index 0.1 Sooting Candles Wax IGI Paraflex 4786 Wick WEDO LX20 Burn rate 6.5 gr.hr Soot Index 2 Wax NatureWax C3 Wick WEDO 3x30 SU Burn rate 7.6 gr/hr Soot Index 4 28 14

Standard vs. Sooting Candles Dioxins and Furans (PCDD/PCDF) as WHO-TEQ Standard Candles Sooting Candles 0.0336 pg TEQ/hr 0.3705 pg TEQ/hr 0.0378 pg TEQ/hr 0.2584 pg TEQ/hr 29 Standard vs. Sooting Candles PAHs Sample analysed for 13 different compounds Standard Candles Sooting Candles 15.59 ng/hr 101.31 ng/hr 14.12 ng/hr 105.43 ng/hr 30 15

Standard vs. Sooting Candles Short Chain Aldehydes Incl. Formaldehyde, Acetaldehyde, Propionaldehyde. Acrolein not detected. Standard Candles Sooting Candles 2.77µg/hr 38.48µg/hr 8.99µg/hr 41.8µg/hr 31 Standard vs. Sooting Candles VOCs Total of 285 compounds targeted. Standard Candles Sooting Candles 17.14µg/hr 18.46µg/hr 12.89µg/hr 13.60µg/hr 32 16

Soot Index vs. Emission Based on these results (and the results in some previous German studies) there does appear to be a correlation between the visible and invisible emissions. 33 Selecting the best wick is key The wick is the control of the burning process in any candle system The wick determines the fuel flow. The fuel flow determines the flame size. The fuel flow determines the carbon concentration in the flame. The fuel flow influences sooting behaviour. 34 17

Soot Testing In Summary A candle is a system. Emissions of significant amounts of soot are an indication that the system is out of control. Emissions of soot indicates incomplete combustion which suggests the candle will emit higher levels of other hazardous materials (e. g. Dioxins, PAH...) Soot testing is simple, inexpensive and can be carried out by any candlemaker. The soot test is a HEALTH-CHECK for a candle. 35 CEN Soot Test Equipment Further information about the equipment required to undertake the CEN Soot Test Standard can be obtained from: http://www.heilmetalle.com/english/index_e.html 36 18

MY THANKS TO: Michael Matthaei previously with Sasolwax and now Managing Director of WEDO wick. Helmut Gutberlet and colleagues at Sasolwax Rob Harrington of Blyth Corporation. So many other friends in the Candle Industry. And, of course to you for listening! 37 19