PRODUCT FAMILY DATA SHEET CLD-DS16 REV 6 Cree XLamp MC-E LED PRODUCT DESCRIPTION The XLamp MC-E LED is a lightingclass, multi-chip LED that provides high lumen output in a small footprint package. Compared to discrete LEDs, XLamp MC-E LEDs reduce the distance between LED die, creating a small optical source for excellent optical control and efficient color mixing. XLamp MC-E LEDs can reduce LED system complexity by reducing the number of components required. Cree XLamp LEDs bring high performance and quality of light to a wide range of lighting applications, including color-changing lighting, portable and personal lighting, outdoor lighting, indoor directional lighting, and entertainment lighting. FEATURES Available in white (2600 K 10,000 K CCT), EasyWhite, or color (RGBW) ANSI-compatible neutral & warm white chromaticity bins Individually addressable LEDs Maximum drive current: 700 ma per LED die Reflow solderable JEDEC J-STD-020 Electrically neutral thermal path RoHS and REACH-compliant TABLE OF CONTENTS Flux Characteristics... 2 Characteristics - Complete Package... 3 Characteristics - Per LED Die (White)... 3 Characteristics - Per LED Die (Color)... 3 Relative Spectral Power Distribution - White... 4 Relative Spectral Power Distribution - Color... 4 Relative Flux Output vs Junction Temperature... 5 Electrical Characteristics... 6 Relative Intensity vs. Current... 6 Typical Spatial Radiation Pattern... 7 Reflow Soldering Characteristics... 8 Notes... 9 Mechanical Dimensions...11 Tape and Reel...12 Dry Packaging and Packaging...13 WWW. CREE.COM/XLAMP Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300
XLAMP MC-E LEDS FLUX CHARACTERISTICS (T J = 25 C) The following tables provide several base order codes for XLamp MC-E. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp MC-E Binning and Labeling document. Part Color CCT / Dominant Wavelength Range Base order codes Min Luminous Flux (lm) @ 350 ma* Order Code Min. Max. Group Flux (lm) Cool White 5,000 K 10,000 K Neutral White 3,700 K 5,000 K K 370 MCE4WT-A2-0000-000K01 M 430 MCE4WT-A2-0000-000M01 J 320 MCE4WT-A2-0000-000JE4 K 370 MCE4WT-A2-0000-000KE4 G 240 MCE4WT-A2-0000-000GE7 Warm White 2,600 K 3,700 K H 280 MCE4WT-A2-0000-000HE7 J 320 MCE4WT-A2-0000-000JE7 White 4,000 K K 370 MCEEZW-A1-0000-0000K040F EasyWhite (4-Step) 3,500 K J 320 MCEEZW-A1-0000-0000J035F 3,000 K J 320 MCEEZW-A1-0000-0000J030F 2,700 K H 280 MCEEZW-A1-0000-0000H027F 4,000 K K 370 MCEEZW-A1-0000-0000K040H EasyWhite (2-Step) 3,500 K J 320 MCEEZW-A1-0000-0000J035H 3,000 K J 320 MCEEZW-A1-0000-0000J030H 2,700 K H 280 MCEEZW-A1-0000-0000H027H Red 620 nm 630 nm 30.6 Green 520 nm 535 nm 67.2 A5 Blue 450 nm 465 nm 8.2 MCE4CT-A2-0000-00A5AAAA1 Color Cool White 5,700 K 7,000 K 100 Red 620 nm 630 nm 30.6 Green 520 nm 535 nm 67.2 A4 Blue 450 nm 465 nm 8.2 MCE4CT-A2-0000-00A4AAAB1 Neutral White 3,700 K 4,300 K 80 Notes: Cree maintains a tolerance of ±7% on flux and power measurements. Typical CRI for cool white and neutral white (3,700 K - 10,000 K CCT) is 75. Typical CRI for warm white (2,600 K - 3,700 K CCT) and EasyWhite is 80. Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 ma. The flux and chromaticity of XLamp MC-E White are measured with all LEDs lit simultaneously. The flux and color of each LED in XLamp MC-E Color are measured individually. Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 2
XLAMP MC-E LEDS CHARACTERISTICS - COMPLETE PACKAGE The following table lists the product characteristics for the XLamp MC-E LED package. Characteristics Unit Minimum Typical Maximum Thermal Resistance, junction to solder point - white C/W 3 Thermal Resistance, junction to solder point - color C/W 4 Viewing Angle (FWHM) - white degrees 110 Viewing Angle (FWHM) - color degrees 115 ESD Classification (HBM per Mil-Std-883D) Class 2 LED Junction Temperature C 150 CHARACTERISTICS - PER LED DIE (WHITE) The following table lists the product characteristics of each individual LED die within the XLamp MC-E White LED package. Characteristics Unit Minimum Typical Maximum Temperature Coefficient of Voltage mv/ C -4 DC Forward Current ma 700 Reverse Voltage V 5 Forward Voltage (@ 350 ma) V 3.2 3.9 Forward Voltage (@ 700 ma) V 3.4 CHARACTERISTICS - PER LED DIE (COLOR) The following table lists the product characteristics for each LED die within the XLamp MC-E Color LED package. Characteristics Unit Red Green Blue White Temperature Coefficient of Voltage mv/ C Typ. -2-4 -4-4 DC Forward Current ma Max. 700 700 700 700 Reverse Voltage V Max. 5 5 5 5 Typ. 2.1 3.4 3.2 3.2 Forward Voltage (@ 350 ma) V Max. 2.5 3.9 3.9 3.9 Forward Voltage (@ 700 ma) V Typ. 2.3 3.7 3.5 3.5 Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 3
XLAMP MC-E LEDS Relative Spectral Power Distribution (If = 350 ma per LED) - Whit RELATIVE SPECTRAL POWER DISTRIBUTION (I F = 350 MA PER LED) - WHITE The following The following graph graph represents represents typical typical spectral spectral output output of the of XLamp the XLamp MC-E MC-E White White LED with LED all with four all LEDs four on LEDs simultaneously. on simultaneously. 100 Relative Radiant Power (%) 80 60 40 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) 5000K - 10000K CCT 3700K - 5000K CCT 2600K - 3700K CCT RELATIVE SPECTRAL POWER DISTRIBUTION (I F = 350 MA PER LED) - COLOR Relative Spectral Power Distribution (If = 350 ma per LED) - Color The following graph represents typical spectral output of the XLamp MC-E Color LED with all four LEDs on simultaneously. The following graph represents typical spectral output of the XLamp MC-E Color LED with all four LEDs on simultaneously. 100 Relative Radiant Power (%) 80 60 40 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) RGBW (6000K) RGBW (4000K) Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 4
XLAMP MC-E LEDS RELATIVE SPECTRAL POWER DISTRIBUTION (I F = 350 MA PER LED) - COLOR (CONTINUED) The following graph represents typical spectral output of the XLamp MC-E Color LED with each LED on independently. The following graph represents typical spectral output of the XLamp MC-E Color LED with each LED on independently. 100 Relative Radiant Power (%) 80 60 40 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) Red Green Blue White (6000K) White (4000K) RELATIVE FLUX OUTPUT VS JUNCTION TEMPERATURE (I F = 350 MA) The following graph represents typical performance of each LED die in the XLamp MC-E LED. 100% 90% Relative Luminous Flux 80% 70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (ºC) White Red Green Blue Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 5
XLAMP MC-E LEDS ELECTRICAL CHARACTERISTICS (T J = 25 C) The following graph represents typical performance of each LED die in the XLamp MC-E LED. 700 600 Forward Current (ma) 500 400 300 200 100 White, Blue Red Green 0 1.5 2.0 2.5 3.0 3.5 4.0 Forward Voltage (V) Relative Intensity vs. Current (Tj = 25ºC) RELATIVE INTENSITY VS. CURRENT (T J = 25 C) The following graph represents typical performance of each LED die in the XLamp MC-E LED The following graph represents typical performance of each LED die in the XLamp MC-E LED. 200 Relative Luminous Flux (%) 180 160 140 120 100 80 60 40 20 0 0 100 200 300 400 500 600 700 Forward Current (ma) White, Blue Red Green Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 6
XLAMP MC-E LEDS TYPICAL SPATIAL RADIATION PATTERN The following graph represents typical output of the XLamp MC-E LED with all four LEDs on simultaneously. 120 Relative Luminous Intensity (%) 100 80 60 40 20 0-90 -60-30 0 30 60 90 Angle (º) White Color Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 7
XLAMP MC-E LEDS REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp MC-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder Average Ramp-Up Rate (Ts max to Tp) 3 C/second max. 3 C/second max. Preheat: Temperature Min (Ts min ) 100 C 150 C Preheat: Temperature Max (Ts max ) 150 C 200 C Preheat: Time (ts min to ts max ) 60-120 seconds 60-180 seconds Time Maintained Above: Temperature (T L ) 183 C 217 C Time Maintained Above: Time (t L ) 60-150 seconds 60-150 seconds Peak/Classification Temperature (Tp) 215 C 260 C Time Within 5 C of Actual Peak Temperature (tp) 10-30 seconds 20-40 seconds Ramp-Down Rate 6 C/second max. 6 C/second max Time 25 C to Peak Temperature 6 minutes max. 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 8
XLAMP MC-E LEDS NOTES Lumen Maintenance Projections Based on internal long-term reliability testing, Cree projects white XLamp MC-E LEDs to maintain an average of 70% lumen maintenance after 50,000 hours, provided the LED junction temperature is maintained at or below 135 C and each LED is operated with a constant current of up to 700 ma. Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity XLamp MC-E LEDs are shipped in sealed, moisture-barrier Maximum Percent Relative Humidity bags (MBB) designed for long shelf life. If XLamp MC-E LEDs are exposed to moist environments after opening the MBB packaging but before soldering, damage to the LED may occur during the soldering operation. The following derating table defines the maximum exposure time (in days) Temperature 30ºC 25ºC 20ºC 30% 9 12 17 40% 5 7 9 50% 4 5 7 60% 3 4 6 70% 1 2 2 80% 1 1 2 90% 1 1 1 for an XLamp MC-E LED in the listed humidity and temperature conditions. LEDs with exposure time longer than the time specified below must be baked according to the baking conditions listed below. Baking Conditions It is not necessary to bake all XLamp MC-E LEDs. Only the LEDs that meet all of the following criteria must be baked: LEDs that have been removed from the original MBB packaging LEDs that have been exposed to a humid environment longer than listed in the Moisture Sensitivity section above LEDs that have not been soldered LEDs should be baked at 80ºC for 24 hours. LEDs may be baked on the original reels. Remove LEDs from MBB packaging before baking. Do not bake parts at temperatures higher than 80ºC. This baking operation resets the exposure time as defined in the Moisture Sensitivity section above. Storage Conditions XLamp MC-E LEDs that have been removed from original MBB packaging but not soldered yet should be stored in a room or cabinet that will maintain an atmosphere of 25 ±5ºC and no greater than 10% RH. For LEDs stored in these conditions, storage time does not add to exposure time as defined in the above Moisture Sensitivity section. Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 9
XLAMP MC-E LEDS RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the Cree LED Eye Safety Application Note (http://www.cree.com/products/pdf/xlamp_eye- Safety.pdf). Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 10
A Initial Release 10/16/07 RC.80 TYP. B Change height due to new lens 10/23/2007 RC C Change recommended solder pad footprint 11/26/2007 RC D Height change due to new lens (was 3.86) 12/26/2007 RC 6 5 - Change package height FROM 1.5 TO 1.45 - Add LED reference designators NOTICE E - Delete Series Configuration schematic 5/12/2008 CREE RC CONFIDENTIAL. THIS PLOT AND THE INFORMATION - Add tabs to recommended PCB footprint CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. D XLAMP MC-E LEDS 4 3 4 D3 D4 MECHANICAL DIMENSIONS 6 5 6 5 OTICE 1.50 BSC L. PITCH THIS D PLOT AND THE INFORMATION 5 ARE THE PROPRIETARY AND ORMATION OF CREE, INC. THIS PLOT IED, ROPRIETARY 00 T RSON AND REPRODUCED THE WITHOUT INFORMATION DISCLOSED TO ANY AND.10 THE WRITTEN CONSENT OF CREE, INC. THIS PLOT DUCED OR DISCLOSED TO ANY OUT THE WRITTEN CONSENT NK Top View HEATSINK 6 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 1.45.05±.05 1.454.48±.20.05±.05 4 5 4.48±.20 2.60 D C 4 1.45.05±.05 A.75 C B +.13 -.03 All measurements are ±.1mm unless otherwise indicated. HEATSINK 4.48±.20.75 +.13 -.03 3 4 5.40 3 1 2 3 4.75 +.13 -.03.80 TYP..80 +.2 TYP. 9.0 7.50 1 2.0 3 4 2.60 1.45.05±.05 3 Bottom View A 4.48±.20 E 2 REVISIO REV COMMENTS 2 A Initial Release.80 REVISIONS B Change height due to new lens REV COMMENTS TYP. DAT C Change recommended solder pad R3.18 footprint A Initial Release 10/16 B Change height D due Height to new change lens due to new lens (was 3.86) 10/23/ 1 2 C Change recommended.25 3 4 - Change solder package pad footprint height FROM 1.5 TO 11/26/ 1.45 E - Add LED reference designators D Height change due - to Delete new lens Series (was Configuration 3.86) schematic12/26/ - Add tabs to recommended PCB footprint - Change package height FROM 1.5 TO 1.45 E - Add LED reference designators - Delete Series Configuration schematic 5/12/2 - Add tabs to recommended PCB footprint D2 D3 D1 D4 REV A B C D C Side View 2.60 B +.2 9.0.0.25 1.16 Top View R3.18 8 7 6 5 2.00 NEGATIVE (-) 2 7 3.85 R3.18 1.50 BSC 5.40.25 8 7 6 5 PITCH 2.84 7.70 10.02 1.50 BSC NEGATIVE (-) 3 6 5.40.25 PITCH DRAWN BY DATE 7.00.10 UNLESS OTHERWISE SPECIFIED R.Chaloupecky 10/16/07 4600 Silicon Drive 7090MC PARALLEL / INDEPENDENT DIMENSIONS ARE IN Durham, N.C 27703 CHECK DATE MILLIMETERS & BEFORE FINISH. 2.75 CONFIGURATION 5.60 TOLERANCE UNLESS SPECIFIED: Ban Loh 7.00.10 1.30 NEGATIVE (-) 4 5.X ± 0.3 APPROVED DATE A.XX ±.13 TITLE OUTLINE DRAWING, X ± 1 1.16 MATERIAL 1.00 TYP. 7090MC PACKAGE 1.50 BSC 8 D1 1 NEGATIVE (-) 1 POSITIVE (+) 1 FOR SHEET B METAL PARTS ONLY SIZE DRAWING NO. REV. A PITCH.X ±.25 FINAL PROTECTIVE FINISH.XX ±.10 C 2610-00005 E D5 SCALE 7090MC PARALLEL RECOMMENDED / INDEPENDENTPCB SOLDER PAD X ± 2 20:1 SHEET 1 OF 1 CONFIGURATION D2 5.60 2 2.00 1 1. Tolerances: NEGATIVE.10 (-) 2 7 2 POSITIVE (+) 2 3.85 7090MC PARALLEL / INDEPENDENT 2. Solder mask windows must be.05 mm bigger CONFIGURATION D6 5.60 than PCB Solder Pad. 1.00 TYP. 2.84 7.70 10.02 8 D1 1 D3 NEGATIVE (-) 1 NEGATIVE (-) 3 6 POSITIVE (+) 1 3 POSITIVE (+) 3 TYP. 8 D1 D5 1 D7 NEGATIVE (-) 1 6 POSITIVE (+) 1 5 4 2.75 1.30 D2 D5 2.00 NEGATIVE (-) 2 7 2 D4 NEGATIVE (-) 4 5 POSITIVE (+) 2 4 POSITIVE (+) 4 2.00 1.50 BSC PITCH 2.60 5.40 A A 2.84 7.70 10.02 +.2 9.0.0 7.50 R3.18 5.60 7.50 1.00 TYP. D2 D3 D1 D4 D2 NEGATIVE (-) 2 7 D6 2 POSITIVE (+) 2 D2 D3 D1 D4 D8 8 7 6 5 1.50 BSC PITCH Color D1: Red D2: 7.00 Green D3: Blue D4: White NEGATIVE (-) 1.10 D3 D6 NEGATIVE (-) 3 6 3 UNLESS OTHERWISE SPECIFIED POSITIVE (+) 3 A DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. 2.84 7.70 10.02 D3 NEGATIVE (-) 3 6 D7 3 TOLERANCE UNLESS SPECIFIED: RECOMMENDED PCB SOLDER PAD POSITIVE (+) 3.X ± 0.3 2.75 1.30 D4 D7 NEGATIVE (-) 4 5 4.XX ±.13 Recommended 1. Tolerances:.10 PCB Solder Pad POSITIVE (+) 4 THIRD ANGLE PROJECTION 2. Solder mask windows must be.05 mm bigger X ± 1 5 than 1.30PCB Solder Pad. D4 NEGATIVE (-) 4 5 D8 4 FOR SHEET METAL PARTS ONLY POSITIVE (+) 4.X ±.25 DRAWN BY DATE.XX ±.10 D8 UNLESS OTHERWISE SPECIFIED R.Chaloupecky 10/16/07 Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree DIMENSIONS logo ARE and IN XLamp are registered X trademarks of Cree, Inc. ± 2 CHECK DATE MILLIMETERS & BEFORE FINISH. DRAWN BY DATE 6 5 4 UNLESS OTHERWISE TOLERANCE SPECIFIED UNLESS SPECIFIED: 3 Ban Loh COMMENDED PCB SOLDER PAD R.Chaloupecky 10/16/07 DIMENSIONS ARE IN.X ± 0.3 APPROVED DATE CHECK DATE MILLIMETERS & BEFORE FINISH..XX ±.13 TITLE lerances:.10 11 TOLERANCE UNLESS SPECIFIED: Ban Loh lder DED mask PCB windows SOLDER must PAD THIRD ANGLE PROJECTION be.05 mm bigger MATERIAL.X ± 0.3 X ± 1 APPROVED DATE an PCB Solder Pad..XX ±.13 TITLE FOR SHEET METAL PARTS ONLY 7090 8 DRA R.C CHE Ba APPR MATE FINAL O 7
XLAMP MC-E LEDS TAPE AND REEL All measurements in mm. 1.75±.10 4.0±.1 12.0±.1 1.5±.1 Cathode Side 5.5±.1 +.3 16.0.0 Anode Side (denoted by chamfer) END User Feed Direction START Trailer 160mm (min) of empty pockets sealed with tape (13 pockets min.) Loaded Pockets (200 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (34 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 7" 13mm Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 12
XLAMP MC-E LEDS DRY PACKAGING AND PACKAGING Humidity Humidity Humidity Indicator Humidity Indicator Indicator Card (inside Indicator (inside bag) bag) Card (inside (inside bag) bag) Dessicant Dessicant Desiccant Desiccant (inside bag) bag) (inside bag) bag) Vacuum-Sealed Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Moisture Barrier Bag CREE Label Bin with Code Cree Bin CREE Label & Code, Barcode Bin with Code Qty, Cree Label Lot Bin # & Code, Barcode Qty, Label Lot # Label with with Customer Cree Bin Label Code, P/N, with with Qty, Customer Qty, Lot Cree #, Lot PO Bin # Code, P/N, Qty, Qty, Lot #, Lot PO # Patent Label Patent Label Label with Customer Order Label Code, with Qty, Customer Reel ID, Order PO # Code, Qty, Reel ID, PO # Label with Customer Order Code, Qty, Reel ID, PO# Label with Cree Bin Code, Qty, Lot # Copyright 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 13
BINNING & LABELING CLD-AP20 REV 6 Cree XLamp MC-E LED INTRODUCTION This document describes the product nomenclature required to select and order Cree XLamp MC-E LEDs. XLamp MC-E LEDs are tested and sorted into bins which are then combined into orderable kits identified by an order code. All XLamp LEDs are tested and sorted by color and brightness into a unique bin. Each bin contains LEDs from only one color and brightness group and is uniquely identified by a bin code. White XLamp LEDs are sorted by chromaticity (color) and luminous flux (brightness). Color XLamp LEDs are sorted by dominant wavelength (color) and luminous flux (brightness). LEDs are shipped on reels containing LEDs from one bin and are always labeled with the appropriate bin code. Kits contain LEDs from a number of similar bins and are fully defined by their order codes. A full explanation of the order codes for XLamp MC-E, as well as a list of standard order codes, is provided in this document. TABLE OF CONTENTS Introduction... 2 Bin and Order-Code Format (White)... 3 Bin and Order-Code Format (EasyWhite)... 4 Bin and Order-Code Format (Color)... 5 Performance Groups Brightness... 6 Performance Groups Chromaticity... 7 Performance Groups Dominant Wavelength... 9 Cree s Standard Chromaticity Regions Plotted on the 1931 CIE Curve... 10 Standard Order Codes and Bins (MC-E Cool White)... 12 Standard Order Codes and Bins (MC-E Neutral White)... 12 Standard Order Codes and Bins (MC-E Warm White)... 13 Standard Order Codes and Bins (MC-E EasyWhite)... 14 Standard Order Codes and Bins (MC-E Color)... 15 WWW. CREE.COM/XLAMP Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300
CLD-AP20 REV 6 BIN AND ORDER-CODE FORMAT (WHITE) Bin codes and order codes are configured in the following manner: Order Code SSSGCC-BD-HHHH-NNNNNN Series MCE = MC-E Color WT = White Optical characteristic 2 = Lambertian Kit number Internal code Package configuration A = Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Bin Code SSSGCC-BD-WWW-FF-G-AAAAA Series MCE = MC-E Color WT = White Package configuration A = Individually addressable (all anodes on same side) Chromaticity group Luminous flux group Internal code Optical characteristic 2 = Lambertian Number of chips 4 = 4 chips Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 2
CLD-AP20 REV 6 BIN AND ORDER-CODE FORMAT (EASYWHITE ) Bin codes and order codes are configured in the following manner: Order Code SSSCCC-BD-HHHH-NNNNNNNNN Series MCE = MC-E Package configuration A = Individually addressable (all anodes on same side) Internal code Kit number Optical characteristic 1 = Lambertian Color EZW = EasyWhite Bin Code SSSCCC-BD-WWW-FF-GG-AAAA Series MCE = MC-E Package configuration A = Individually addressable (all anodes on same side) Chromaticity group Internal code Flux group Optical characteristic 1 = Lambertian Color EZW = EasyWhite Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 3
CLD-AP20 REV 6 BIN AND ORDER-CODE FORMAT (COLOR) Bin codes and order codes are configured in the following manner: Order Code SSSGCC-BD-HHHH-NNNNNNNNN Series MCE = MC-E Color CT = Red, Green, Blue, White Optical characteristics 2 = Lambertian Internal code Dominant wavelength kit (RGB) Chromaticity kit for white Flux kit Internal code Package configuration A: Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Bin Code SSSGCC-BD-HHHH-NNNMMMKKK Series MCE = MC-E Color CT = Red, Green, Blue, White Optical characteristics 2 = Lambertian Dominant wavelength bin for each die (RGB) Internal code Chromaticity bin for white die Flux bin for each die (RGBW) Package configuration A: Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 4
CLD-AP20 REV 6 PERFORMANCE GROUPS BRIGHTNESS XLamp MC-E White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Min. Luminous Flux @ 350 ma (lm) Max. Luminous Flux @ 350 ma (lm) F 210 240 G 240 280 H 280 320 J 320 370 K 370 430 M 430 490 * Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 ma. * The flux and chromaticity are measured with all LEDs lit simultaneously. Each LED die in the XLamp MC-E Color LED is tested individually for luminous flux and placed into one of the following luminous-flux groups. The luminous-flux groups for the XLamp MC-E Color LED specify only minimum flux and do not have a maximum. Color Group Code Min. Luminous Flux @ 350 ma Red K 30.6 Green P 67.2 Blue E 8.2 White J 80 K 100 Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 5
CLD-AP20 REV 6 PERFORMANCE GROUPS CHROMATICITY XLamp MC-E White LEDs and the white LED in the XLamp MC-E Color LED are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. The XLamp MC-E White LED is tested with each LED die connected to independent drive circuits at 350 ma and all LEDs lit simultaneously. The white LED in the XLamp MC-E Color LED is tested individually. Region x y Region x y WK WA WM WB WE WN WC.283.284.314.355.295.297.316.332 WF.298.288.306.322.287.276.301.342.292.306.317.319.295.297.329.330 WP.283.284.329.318.279.291.318.308.295.297.329.345.308.311.329.330 WD.310.300.317.319.298.288.316.332.306.322.329.369.308.311.329.345 WG.295.297.316.332.292.306.314.355.301.342.329.330.306.322.329.345 WJ.292.306.346.359.287.321.344.342.308.311.348.384.317.319.346.359 WH.318.308.329.345.310.300.329.369.316.332.317.319.308.311.306.322 Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 6
CLD-AP20 REV 6 PERFORMANCE GROUPS CHROMATICITY (CONTINUED) 3A 4A 5A 6A 7A 8A 40F 40H x y.3371.3490 x y.3376.3616 x y.3463.3687 Region Region Region Region.3451.3554.3463.3687.3551.3760.3533.3620 3B 3C 3D.3440.3428.3451.3554.3533.3620.3515.3487 x y.3451.3554.3366.3369.3371.3490.3451.3554.3440.3428.3512.3465.3529.3597.3615.3659.3590.3521.3529.3597.3548.3736.3641.3804.3615.3659 4B 4C 4D.3615.3659.3641.3804.3736.3874.3702.3722.3590.3521.3615.3659.3702.3722.3670.3578.3670.3578.3702.3722.3825.3798.3783.3646.3702.3722.3736.3874.3869.3958.3825.3798 5B 5C 5D.3825.3798.3869.3958.4006.4044.3950.3875.3783.3646.3825.3798.3950.3875.3898.3716.3889.3690.3941.3848.4080.3916.4017.3751.3941.3848.3996.4015.4146.4089.4080.3916 6B 6C 6D.4080.3916.4146.4089.4299.4165.4221.3984.4017.3751.4080.3916.4221.3984.4147.3814.4147.3814.4221.3984.4342.4028.4259.3853.4221.3984.4299.4165.4430.4212.4342.4028 7B 7C 7D.4342.4028.4430.4212.4562.4260.4465.4071.4259.3853.4342.4028.4465.4071.4373.3893.4373.3893.4465.4071.4582.4099.4483.3919.4465.4071.4562.4260.4687.4289.4582.4099 8B 8C 8D.4582.4099.4687.4289.4813.4319.4700.4126.4483.3919.4582.4099.4700.4126.4593.3944.3744.3685.3981.3800.4242.3919.4475.3994.3782.3837.4040.3966.4322.4096.4573.4178 35F 30F 27F.3912.3917.4186.4037.4449.4141.4695.4207.3863.3758.4116.3865.4359.3960.4589.4021.3784.3741.4030.3857.4291.3973.4528.4046.3804.3818.4061.3941.4333.4062.4578.4138 35H 30H 27H.3867.3857.4132.3976.4395.4084.4638.4152.3844.3778.4099.3890.4351.3994.4586.4060 Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 7
CLD-AP20 REV 6 PERFORMANCE GROUPS DOMINANT WAVELENGTH The red, green and blue LEDs in the XLamp MC-E Color LED are tested individually for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color Blue Green DWL Group Min. DWL @ 350 ma Max. DWL @ 350 ma K 450 455 L 455 460 M 460 465 2 520 525 3 525 530 4 530 535 Red A 620 630 Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 8
CLD-AP20 REV 6 CREE S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE Cool White Neutral and Warm White CCy 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 5000K 4750K 5300K 3B 3A 3C 3D 4A 4B 4500K 4D 4C 4300K 5A 5B 4000K 5D 5C 6A 3700K 6B 3500K 6D 6C 7A 3200K 7B 7D 2900K 3000K 7C 8A 8B 8D 8C 2700K ANSI C78.377A 2600K 0.33 0.32 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 CCx 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 9
CLD-AP20 REV 6 CREE S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE (CONTINUED) EasyWhite 0.45 0.44 ANSI C78.377 Quadrangle EasyWhite "F" (4-Step) Chromaticity Regions 3000K 2700K 0.43 3500K 0.42 4000K 0.41 4500K CCy 0.40 0.39 35F 30F 27F 0.38 0.37 40F 0.36 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 CCx 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.45 0.44 ANSI C78.377 Quadrangle EasyWhite "H" (2-Step) Chromaticity Regions 3000K 2700K 0.43 3500K 0.42 4000K 0.41 4500K 27H CCy 0.40 0.39 35H 30H 0.38 40H 0.37 0.36 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 CCx 0.43 0.44 0.45 0.46 0.47 0.48 0.49 Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 10
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E COOL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Min. Luminous Flux (lm) @ 350 ma* Chromaticity Regions Kit Number Group Flux (lm) Cool White (5000 K 10,000 K) K 370 M 430 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP 000K01 000K02 000K03 000M01 000M02 000M03 For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MC-E order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 11
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E NEUTRAL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 ma* Chromaticity Regions Kit Number CCT Group Flux (lm) Neutral White (3700 K - 5000 K) H 280 5C, 5D, 6A, 6B 000HF6 3700 K 3A, 3B, 3C, 3D 000JE3 5000 K 3C, 3D, 4A, 4B 000JF4 4750 K J 320 4A, 4B, 4C, 4D 000JE4 4500 K 4C, 4D, 5A, 5B 000JF5 4300 K 5A, 5B, 5C, 5D 000JE5 4000 K 5C, 5D, 6A, 6B 000JF6 3700 K 3A, 3B, 3C, 3D 000KE3 5000 K 3C, 3D, 4A, 4B 000KF4 4750 K K 370 4A, 4B, 4C, 4D 000KE4 4500 K 4C, 4D, 5A, 5B 000KF5 4300 K 5A, 5B, 5C, 5D 000KE5 4000 K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MC-E order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 12
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E WARM WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 ma* Chromaticity Regions Kit Number CCT Group Flux (lm) Warm White (2600 K - 3700 K) 6C, 6D, 7A, 7B 000GF7 3200 K G 240 7A, 7B, 7C, 7D 000GE7 3000 K 7C, 7D, 8A, 8B 000GF8 2900 K 8A, 8B, 8C, 8D 000GE8 2700 K 6A, 6B, 6C, 6D 000HE6 3500 K 6C, 6D, 7A, 7B 000HF7 3200 K H 280 7A, 7B, 7C, 7D 000HE7 3000 K 7C, 7D, 8A, 8B 000HF8 2900 K 8A, 8B, 8C, 8D 000HE8 2700 K 6A, 6B, 6C, 6D 000JE6 3500 K 6C, 6D, 7A, 7B 000JF7 3200 K J 320 7A, 7B, 7C, 7D 000JE7 3000 K 7C, 7D, 8A, 8B 000JF8 2900 K 8A, 8B, 8C, 8D 000JE8 2700 K K 370 6A, 6B, 6C, 6D 000KE6 3500 K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MC-E order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 13
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E EASYWHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - EasyWhite Minimum Luminous Flux (lm) @ 350 ma* Chromaticity Regions Kit Number CCT Group Flux (lm) EasyWhite 35F 0000H035F 3500 K 35H 0000H035H 3500 K H 280 30F 0000H030F 3000 K 30H 0000H030H 3000 K 27F 0000H027F 2700 K 27H 0000H027H 2700 K 40F 0000J040F 4000 K 40H 0000J040H 4000 K 35F 0000J035F 3500 K J 320 35H 0000J035H 3500 K 30F 0000J030F 3000 K 30H 0000J030H 3000 K 27F 0000J027F 2700 K 27H 0000J027H 2700 K 40F 0000K040F 4000 K K 370 40H 0000K040H 4000 K 35F 0000K035F 3500 K 35H 0000K035H 3500 K Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 14
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E COLOR) Preliminary April 29, 2009 The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s color or chromaticity bins and luminous flux range. Flux Characteristics (T J = 25 C) Red, Green, Blue and White (RGBW) Product MC-E Color (RGBW) XLamp MC-E LED Standard Order Codes - Color Minimum Luminous Flux Min Luminous Color (lm) Flux @ 350 (lm) Color ma* Dominant DWL Wavelength / Chromaticity (nm) @ 350 ma* Bins Configuration Group Flux (lm) Kit Code Flux (lm) Kit Code Min. Max. Kit Number Order Code Red K 30.6 A Red Green P 30.6 67.2 A 620 2, 3, 4 630 00A5AAAA1 Green Blue E 67.2 8.2 A 520K, L, M 535 A5 MCE4CT-A2-0000-00A5AAAA1 White K 100 WC, WD, WF, WG Blue 8.2 A 450 465 Red K 30.6 A White** 95 A1 WC, WD WG, WF, Green P 67.2 2, 3, 4 Red Blue E 30.6 8.2 A 620K, L, M 630 00A4AAAB1 Green White J 67.2 80 A 5A, 5205B, 5C, 5D 535 A4 Blue 8.2 A 450 465 MCE4CT-A2-0000-00A4AAAB1 For other flux and chromaticity combinations, contact Cree or an authorized distributor. White** 80 B1 5A, 5B, 5C, 5D * Cree XLamp MC-E order codes specify only a minimum flux bin and not a maximum. * Cree maintains Cree a tolerance may ship of ±7% reels on in flux measurement. bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin ** Chromaticity bins restrictions for white specified emitter: by the order code. Copyright 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 15