Offshore and Onshore Pipeline Solutions Jean Gaumy/Magnum Photos. Tenaris 2004-2005. All rights reserved. Offshore and Onshore Pipeline Solutions 1
The Tenaris Difference Over the years, Tenaris has become an industry tubular products and services leader by being reliable. Producers know they can count on Tenaris to develop, manufacture, and deliver the most efficient and cost-effective solutions for their challenges no matter where they are in the world. 2 Offshore and Onshore Pipeline Solutions
Tenaris Tubular Products and Services for Today and Tomorrow Continuing global oil and gas demand is driving operators to extend their exploration efforts into deeper offshore waters and tap difficult-toproduce land reservoirs. To satisfy this demand, offshore operators need advanced technology solutions to challenges such as sour service, hightemperature/high-pressure (HT/HP) environments, and long-distance tiebacks in deep and ultra-deep water. Meanwhile, onshore operators seek new versions of heavy wall line pipe and pipe protection solutions that provide more effective concrete coatings. Today, these operators are turning to Tenaris for their onshore and offshore technology solutions. Tenaris has earned an industry leadership reputation for anticipating future operator needs, conducting exceptional research and development, manufacturing high-quality products, offering valuable technical and commercial product sales assistance, and hosting specialized workshops that support operators as they plan future projects. Aberdeen Esbjerg Copenhagen Nisku Red Deer Prudential AlgomaTubes Coseley Dalmine Silcotub Atyrau Almaty Bakersfield Denver Hickman Conroe Poza Rica Guadalajara Tamsa Mexico City Dos Bocas Pittsburgh Louisville Counce Cedar Springs Westwego Misurata Dammam Maharashtra New Delhi NKKTubes TuboCaribe Barrancabermeja Lima Callao Villavicencio Warri Lagos Port Harcourt Malabo Luba Luanda Kuala Lumpur Batam Balikpapan SPIJ Jakarta Darwin Confab Rio das Ostras Broome Dampier Santiago Siderca Montevideo Villa Mercedes Siat Perth Manufacturing Centers R&D Centers Service Centers Commercial Offices Offshore and Onshore Pipeline Solutions 3
Pipeline Solutions for Today s Challenges Currently, Tenaris provides complete tubular solutions packages for the most demanding operator challenges. Solutions include: Steel catenary, hybrid risers and top tension risers. The circulation of fluids from the seafloor to the surface is critical to any offshore production operation. Regardless of the riser type and configuration, Tenaris helps operators overcome their riser challenges by utilizing its experience in matching customers high performance specifications and assisting with the selection of the most advantageous materials. Tenaris provides single- and dual-cased top tension risers, single-line or multibore hybrid risers, and any configuration of steel catenary risers. Export lines and flowlines. Tenaris export lines and flowlines can withstand extreme deepsea environments, as well as the demanding installation methods associated with J-lay and reeling. Tenaris offers some of the most advanced, custom-made, heavy wall tubular products available in the industry. Hot induction bends. In addition to employing the traditional method of achieving hot induction bends, Tenaris offers the offline full Quench & Temper method for high specification products. Extensive research by Tenaris has revealed that this method produces more homogenous bend properties which, in turn, lead to better performance for the most demanding offshore projects, such as HP/HT fields, Arctic and Arctic-like environments, ultra-deepwater fields and sour environments. Coiled line pipe. Tenaris offers a broad range of coiled line pipe for downhole and subsea applications. A unique manufacturing process is employed that allows the production of line pipe in continuous lengths. All line pipe is supplied in coil form, and strings range from 2 km to 7 km in length depending on the diameter. After the pipe is manufactured, an external corrosion coating is applied, usually a three-layer system (FBE plus copolymer adhesive plus HDPE or PP top coat) along with an improved cleanliness integrity to NAS 8, Coating, double-joint, Tubular components for subsea applications. Tenaris provides tubular components such as pipe for jumpers, bends, clad pipe and clad bends to support seafloor applications that rely on a remote site or a host facility for utility and well control services. Packages can be customized to meet project specifications. 7 or 6 levels. Tubular components for structural applications. Tenaris provides structural pipes for highly critical offshore applications such as platforms and jack-up rigs. Pipes are provided in weldable high grades and in lengths customized to customer needs. Laser Ends Measurement Service. Using laser optical displacement sensors that measure the distance between the sensor s measuring head and the surface of the tube, the Tenaris Laser Ends Measurement System can perform a complete dimensional assessment of pipe ends to enable a more efficient alignment and to minimize the Hi/Lo differential prior to welding. Depending on customer requirements, the system can cover outside diameter, inside diameter and wall thickness. anode pads and anode installation services. Tenaris offers coating, double-joint pipe, anode and anode pad installation for deep and ultradeepwater projects. These services reduce welding time on site and provide excellent protection for the pipe during its operating life. In addition, the services are done at the mill prior to reaching the project site which reduces labor in the field by virtually one-half. 4 Offshore and Onshore Pipeline Solutions
Anticipating the Future Needs of our Customers Another differentiator that distinguishes Tenaris is an ability to anticipate and then begin research and development on products for the future. As operators embrace new and more complex projects both onshore and offshore, Tenaris continues to devote its resources to finding innovative solutions that will meet operators challenges on these projects. This is accomplished through ongoing research and development of tubular technologies that are safe, technologically sound and economically viable. Additionally, all four of Tenaris R&D centers, along with other internationally recognized universities and laboratories around the world, participate in collaborative programs with customers and key industry players to conduct research and advance data on product technology that is aligned with anticipated future industry needs. Joint Industry Programs (JIPs) Often, when the industry faces common challenges, the best way of solving them is for industry, academia and government players to join forces in serious collaborative efforts called Joint Industry Programs (JIPs). In the past, Tenaris has participated in numerous JIPs and continues to use this technique to help develop future products that the industry requires. For example, Tenaris new 100 Ksi steel grade was developed, in part, through a JIP collaborative effort. At the JIP, operators indicated that steels with a yield strength of 100,000 psi would be needed for constructing the top tension risers for future offshore deepwater projects. Working with the JIP, Tenaris engineers were able to develop the 100 Ksi tubular steel grade, an extremely high specification tubular steel with a yield strength of 100,000 psi and a reduced pipe wall thickness for lower overall tube weight. Cooperative Programs with Universities and Academia Tenaris global network of R&D centers and manufacturing facilities collaborates with more than 60 universities and research institutions worldwide on cooperative programs that focus on basic and applied research. This combination of internal and external expertise provides avenues that lead to the development of valueadded products and improved production processes that directly contribute to our customers success. Offshore and Onshore Pipeline Solutions 5
A Global Research and Development Network Much of Tenaris increased level of performance can be attributed to dedicated efforts to continually increase the quality and range of its products by working with customers and analyzing new trends in the sectors where they operate. Often, this dedication requires exhaustive product research and development, as well as an ability to foresee and then develop products that will fill future operator needs. One of the distinctions that enable Tenaris to rise above its competitors is its worldwide research and development network. This network is a fundamental component in Tenaris approach to differentiation. By acquiring great knowledge of engineering sciences and tubular properties and then combining it with a base of experience gained through working side-by-side with its customers, Tenaris has been able to establish itself as an exceptional provider in the pipeline services marketplace. Globally, around 200 scientists and engineers, more than half of whom have a master s or doctorate degree, work in these R&D centers. Their dedication to continuous improvement and product innovation has already proven invaluable on complex customer exploration and production projects, and highperformance mechanical and structural applications. 6 Offshore and Onshore Pipeline Solutions
Worldwide Centers for Product Research and Development TenarisTamsa center, Veracruz, Mexico The Veracruz center focuses mainly on line pipe and the creation of new products for energy industry tubular goods applications. Research work is centered on the advancement of innovative welding technology and the qualification of premium connections, as well as improving metallurgy and materials, process development, and fracture mechanics studies. Its fullscale testing laboratory utilizes some of the most sophisticated equipment worldwide for testing pipes and threads. Metallurgy and materials research. By proactively conducting continuous research on oil and gas metallurgical technology and working closely with operators, Tenaris has been able to determine the types of metals and materials that will be needed to achieve the high-specification levels of performance operators say they will need for their anticipated future projects. Welding technology innovation. The development of improved welding techniques enables and facilitates the welding of newly developed steel grades and supports improvements in innovative techniques such as double joint welding. Fracture mechanics studies. To ensure that future pipe materials exhibits a sufficiently high Charpy V-notch impact value to arrest a propagating fracture, Tenaris uses fracture mechanics studies to evaluate the structural integrity of its future tubular components. Process development optimization. Tenaris continually strives to optimize the manufacturing processes it uses in order to ensure that it will be capable of manufacturing the products needed for future oil and gas tubular goods applications. One of the tools that is employed in this effort is Finite Element Analysis (FEA). FEA enables metallurgists and manufacturing engineers to obtain a detailed visualization of where structures bend or twist and indicates the distribution of stresses and displacements. This, in turn, enables engineers to design and manufacture tubular goods that exhibit higher performance characteristics. Full-scale laboratory testing. Full-scale performance testing complements FEA and is a critical step to fully verify critical performance features such as galling resistance and sealability performance. This test validates the reliability of a product s structural design and performance through testing that simulates the specific conditions in the oil field where it will be used. Such testing also provides for the qualification of premium connections and the fatigue testing of steel catenary risers, top tension risers and flowlines being developed for use in future pipeline applications. Tenaris NKKT center, Kawasaki, Japan The Kawasaki center specializes in high-chromium steel tubular products (i.e., Cr13 steel grade) for diverse applications. Full-scale testing of premium connections is performed, along with the design and development of corrosion-resistant alloys, sour service materials and drill pipe. Tenaris Dalmine center, Italy Research at this facility mainly focuses on two areas: hot rolling processes and product development for mechanical and thermal applications. The center conducts its own independent research and also collaborates with external research institutes on either extensive basic or highly specialized areas of research. Tenaris Research and Development center, Campana, Argentina Research at the Argentina center covers both products and processes. In terms of processes, researchers focus on steelmaking innovations, rolling, heat treatment, nondestructive testing and the tracking of tubular products. The center also provides scientific and technological research support in such diverse areas and disciplines as metallurgy, steelmaking, chemistry, applied physics, structural integrity, mechanical design, materials and coatings. Investigations are conducted using state-of-theart methodologies and tools including the extensive use of modeling techniques such as FEA and full-scale product testing. Offshore and Onshore Pipeline Solutions 7
Tenaris Offshore and Onshore Tubular Solutions Tenaris delivers a wide range of seamless and welded tubes for onshore line pipe to be used in the most demanding conditions. From the surface to the sea floor, Tenaris offers tubular solutions for almost any offshore challenge. This offering includes riser pipes, export and flow lines, subsea system components, coiled line pipe, stainless steel tubes for umbilicals, and accessories. Oil and gas pipelines 8 Offshore and Onshore Pipeline Solutions
Steel Catenary Risers Work Over Riser Jumpers Offshore and Onshore Pipeline Solutions 9
Hot Induction Bends Top Tension Risers Flowlines, Anticorrosion and Thermal Insulation Coating Offshore and Onshore Pipeline Solutions 10
Product Range and Properties Tenaris manufactures a complete range of seamless and welded pipes for applications under the most demanding conditions and services. Products are manufactured in accordance with particular project specifications and National or International Standards such as: API 5L, API 5LCP, DNV OS F101, ISO 3183, ISO 15590 and EN 10208. WALL THICKNESS mm 2.9 3.2 3.6 4.0 4.5 4.8 4.9 5.2 5.6 6.3 7.1 8.0 8.4 8.8 9.5 10.2 11.1 12.7 13.5 14.3 15.9 17.5 33.4 48.3 60.3 WALL THICKNESS 88.9 mm 6.35 6.86 7.14 7.92 8.74 9.53101.6 10.31 11.13 11.91 12.70 14.27 15.09 15.88 17.48 19.05 20.62 22.23 23.83 25.40 26.42 28.58 30.48 31.75 323.85 114.3 127.0 12.75 355.6 139.7 14 406.4 141.3 16 146.1 457.2 152.4 18 508 159.0 20 558.8 165.1 22 168.3 609.6 177.8 24 660.4 187.7 26 711.2 193.7 28 196.9 762 203.2 30 812.8 209.6 32 863.6 215.9 34 219.1 914.4 222.3 36 965.2 228.6 38 1016 232.0 241.3 40 1066.8 244.5 42 1117.6 246.9 44 1168.4 254.0 266.7 46 1219.2 273.1 48 0.250 0.270 0.281 0.311 0.344 0.375279.4 0.406 0.438 0.468 0.500 0.561 0.594 0.625 0.688 0.750 0.811 0.875 0.938 1.000 1.040 1.125 1.200 1.250 in 287.0 298.5 WALL THICKNESS 300.5 304.8 317.5 323.9 330.2 339.7 344.7 346.1 355.6 368.3 377.0 381.0 385.0 394.0 406.4 457.0 473.1 508.0 533.4 558.0 609.6 660.4 711.0 *OD and WT not reported in the table may be 0.114 0.126 0.141 0.157 0.177 0.189 0.193 0.204 0.220 0.248 0.279 0.315 0.330 0.346 0.374 0.401 0.437 0.500 0.531 0.563 0.626 0.689 available after a dedicated technician analysis. LONGITUDINAL SUBMERGED ARC WELDING DIMENSIONAL RANGE OUTSIDE DIAMETER OUTSIDE DIAMETER SEAMLESS DIMENSIONAL RANGE OUTSIDE DIAMETER 11 Offshore and Onshore Pipeline Solutions
18.3 19.1 20.6 21.4 22.2 25.4 26.5 28.0 30.0 31.0 32.0 35.0 36.0 38.0 39.0 40.0 41.0 42.0 44.0 46.0 48.0 50.0 52.0 53.0 55.0 58.0 60.0 64.0 0.720 0.752 0.811 0.842 0.847 1.000 1.043 1.102 1.181 1.220 1.259 1.378 1.417 1.500 1.540 1.574 1.614 1.653 1.732 1.811 1.889 1.968 2.047 2.086 2.165 2.283 2.362 2.519 in WALL THICKNESS 1.315 1.900 2.375 3.500 4.000 4.500 5.000 5.500 5.563 5.750 6.000 6.250 6.500 6.625 7.000 7.390 7.625 7.750 8.000 8.250 8.500 8.625 8.750 9.000 9.134 9.500 9.625 9.720 10.000 10.500 10.750 11.000 11.300 11.750 11.830 12.000 12.500 12.750 13.000 13.375 13.570 13.625 14.000 14.500 14.840 15.000 15.155 15.511 16.000 18.000 18.625 20.000 21.000 22.000 24.000 26.000 28.000 OUTSIDE DIAMETER 12 Offshore and Onshore Pipeline Solutions
Seamless Pipe Line Projects Typical Requirements SEAMLESS PIPE LINE PROJECTS TYPICAL REQUIREMENTS PROPERTIES 6 OFFSHORE SERVICE 3 C-Mn STEEL GRADES X60 TO X70 ARTIC SERVICE HP/HT SERVICE GAS SERVICE SOUR SERVICE C-Mn STEEL GRADE X80 5 Steel Design Mechanical Properties Corrosion Resistance Non Destructive Inspection Dimensional Tolerances Carbon Equivalent (IIW) 1 1" (25.4 mm) > 1" (25.4 mm) Carbon Equivalent (Pcm) 1 1" (25.4 mm) > 1" (25.4 mm) P (% max) S (% max) Nb+V+Ti (% max) RT Min YS RT Min TS HT Min YS Actual Values RT YS & RT TS variation (Mpa) Y/T (max) Hardness (max single reading Hv10) Minimum Average Toughness (Joules) at -20 C CTOD (mm) at -20 C Tests as per NACE TM0284 & as per ASTM G39 (Sln NACE TM 0177) L & T Defects (Notch Depth) Laminations max area (mm 2 ) 0.41 0.43 0.22 0.23 0.018 0.008 0.12 100 0.87-0.90 248 100 0.20 0.41 0.43 0.22 0.23 0.018 0.005 0.12 120 0.90 260 100 at - 50 C 1000 0.41 0.41 0.43 0.43 0.22 0.22 0.23 0.23 0.018 0.018 0.005 0.005 0.12 0.12 As applicable As applicable 2 120 120 0.90 0.90 260 260 100 100 5% of Nominal WT As applicable 4 0.39 0.42 0.21 0.22 0.015 0.003 0.12 120 0.90 248 100 As applicable 500 0.45 0.24 0.018 0.005 0.12 130 0.93 280 100 1000 Symbols: RT Room Temperature, HP High Pressure, HT High Temperature, YS Yield Strength, TS Tensile Strength, CTOD Crack Tip Opening Displacement, L&T Longitudinal & Transverse, FPBT Four Point Bend Tests Notes: 1. As applicable according to C content and specific requirements. 2. YS derating values at maximum design temperature as per DNV OS F101 Section 5 Figure 5-1. 3. In case of Reel-Laying RT Min YS and RT Min TS are guaranteed after Laboratory or Full-scale Installation Simulation Tests. 4. In case of Offshore Service restricted ID end Tolerances can be supplied after calibration or machining. 5. Cr13 Weldable is also available and requirements shall be analyzed on case by case basis. 6. Depending on Specific Project Requirements offered values may change. 7. 100 ksi Weldable up to 1" is also available and requirements shall be analyzed on case by case basis. 8. Tenaris can produce customized seamless pipes according to customer requerimients. Offshore and Onshore Pipeline Solutions 13
Product Range and Properties Tenaris manufactures a complete range of seamless and welded pipes for applications under the most demanding conditions and services. Products are manufactured in accordance with particular project specifications and National or International Standards such as: API 5L, API 5LCP, DNV OS F101, ISO 3183, ISO 15590 and EN 10208. LONGITUDINAL SUBMERGED ARC WELDING DIMENSIONAL RANGE WALL THICKNESS mm 6.35 6.86 7.14 7.92 8.74 9.53 10.31 11.13 11.91 12.70 14.27 15.09 15.88 17.48 19.05 20.62 22.23 23.83 25.40 26.42 28.58 30.48 31.75 OUTSIDE DIAMETER 323.85 12.75 355.6 14 406.4 16 457.2 18 508 20 558.8 22 609.6 24 660.4 26 711.2 28 762 30 812.8 32 863.6 34 914.4 36 965.2 38 1016 40 1066.8 42 1117.6 44 1168.4 46 1219.2 48 0.250 0.270 0.281 0.311 0.344 0.375 0.406 0.438 0.468 0.500 0.561 0.594 0.625 0.688 0.750 0.811 0.875 0.938 1.000 1.040 1.125 1.200 1.250 in WALL THICKNESS OUTSIDE DIAMETER 14 Offshore and Onshore Pipeline Solutions
OUTSIDE DIAMETER HIGH FREQUENCY INDUCTION/HIGH FREQUENCY CURRENT ELECTRIC RESISTANCE WELDING DIMENSIONAL RANGE WALL THICKNESS mm 1.900 2.000 2.200 2.250 2.650 3.000 3.175 3.200 3.750 4.000 4.370 4.550 4.770 4.850 5.100 5.156 5.540 6.000 6.350 7.010 7.137 7.620 7.925 8.180 8.738 8.560 9.525 9.930 10.312 10.720 11.125 11.913 12.320 12.700 13.056 14.275 9.525 0.38 12.7 0.5 19.05 0.75 25.4 1 OUTSIDE DIAMETER 31.75 1.25 38.1 1.5 50.8 2 63.5 2.5 76.2 3 88.9 3.5 101.6 4 114.3 4.5 124 4.88 140.0 5.51 146.0 5.75 141.3 5.56 168.3 6.63 177.8 7 219.1 8.63 244.5 9.63 273.1 10.75 323.9 12.75 339.7 13.38 355.6 14 406.4 16 457.2 18 473.1 18.63 508.0 20 558.8 22 609.6 24 660.4 26 0.074 0.078 0.086 0.088 0.104 0.118 0.125 0.126 0.147 0.157 0.172 0.180 0.187 0.190 0.200 0.203 0.218 0.236 0.250 0.276 0.280 0.300 0.312 0.322 0.344 0.337 0.375 0.390 0.406 0.422 0.438 0.470 0.485 0.500 0.514 0.562 in WALL THICKNESS Offshore and Onshore Pipeline Solutions 15
A Proven Track Record Tenaris has established an enviable field-proven track record by providing high-specification products for some of the largest projects ever attempted both onshore and in deep and ultra-deep offshore waters. OFFshore Projects Project End User Location Products Supplied Feet Depth Meters Independence Anadarko Gulf of Mexico Seamless pipe for SCRs, infield lines, hot inductions bends 9,039 2,739 Cascade & Chinook Petrobras Gulf of Mexico Lucius Anadarko Gulf of Mexico Jack & St. Malo Chevron Gulf of Mexico Outer and inner pipe for pipe in pipe, gas export lines, anticorrosion and insulation coating, hot induction bends, seamless pipe for hybrid risers, laser end measurement Seamless pipe for flowlines, SCR s. Laser end measurement, ID Counterboring Analysis and Pipe End Machining Seamless pipe for flowlines, SCR s, export lines and hull pipes. Anticorrosive & insulation coating, laser end measurement, hot induction bends (P22) and ID Counterboring Analysis 8,250 2,500 7,168 2,172 7,000 2,133 Thunder Horse BP Gulf of Mexico Seamless pipe for flowlines and SCR's, anticorrosive coating, hot induction bends 6,036 1,829 AKPO Total Nigeria Seamless pipe for export lines, SCR's, flowlines and oil offloading lines 5,500 1,670 Caesar Tonga Anadarko Gulf of Mexico Outer and inner pipe for pipe in pipe, SCR's and hot induction bends 4,729 1,433 Gorgon Chevron Australia Seamless pipe for flowlines, infield lines, hot induction bends, laser end measurement 4,429 1,350 Kizomba A, B, C & D ExxonMobil Angola Tubular Bells Hess Gulf of Mexico Outer and inner pipe for pipe in pipe, seamless pipe for TTR's, infield lines, anticorrosive coating, hot induction bends, laser end measurement Seamless pipe for flowlines, SCR s. Laser end measurement, ID Counterboring Analysis and Pipe End Machining 4,425 1,349 4,326 1,311 Gumusut Shell Malaysia Seamless pipe for flowlines, SCR's and exports lines, hot induction bends 3,937 1,200 Pazflor Total Angola Sul - Norte Capixaba Outer and inner pipe for pipe in pipe, mother pipes for bends, jumpers, buckle arrestors, double joint, anticorrosive coating 3,937 1,200 Petrobras Brazil Welded pipe for export lines 3,937 1,200 Ormen Lange Statoil Norway Seamless pipe for infield lines 3,609 1,100 Bonga Shell Nigeria Seamless pipe for flowlines and SCR's, anticorrosive coating, hot inductions bends, buckle arrestors, J-lay collars 3,599 1,097 Deimos Shell Gulf of Mexico Seamless pipe for SCRs and infield lines, anticorrosive and insulation coating, umbilical tubing 3,002 915 Vega Statoil Norway Seamless pipe for flowlines, upset pipes for WOR's 1,246 380 Marulk Statoil Norway Outer pipe for pipe in pipe 1,198 365 Heera ONGC India Seamless pipe for flowlines 164 50 Kupe Origin New zeland Seamless pipe for flowlines, anticorrosive coating 115 35 Onshore Projects Project End User Location Products Supplied Km Quantity Miles SAS ADNOC Middle East Seamless pipe 442 275 Gassi Touil Sonatrach Noth Africa Seampless pipe, anticorrosive coating 122 76 Rajasthan Cairb Middle East Seamless pipe 262 163 El Merk Sonatrach Noth Africa Seampless pipe, anticorrosive coating 252 157 Karachaganak Phase II Karachaganak Caspian Sea Seamless pipe, anticorrosive and insulation coating 132 82 Gbaran Shell Nigeria Seamless pipe 225 140 PNG LNG ExxonMobil Papua New Guinea seamless pipe, hot induction bends 166 103 Soyo Total Angola Seamless pipe, anticorrosive coating, hot induction bends 121 75 16 Offshore and Onshore Pipeline Solutions
Adding Value to Every Pipeline Project Tenaris adds value to every solution it provides for its customers through minimized risk, innovative engineering and manufacturing processes, and by using its full-scale facilities to fully test and qualify products before they are placed in service. By providing products and services that feature both technical and commercial reliability, Tenaris has built a reputation as the industry s go to company for obtaining pipeline solutions for the toughest challenges. With manufacturing facilities in 15 countries, R&D centers in four countries, the availability of an extensive Internet website, and a Tenaris Service and Distribution Network that assists customers in more than 30 countries, Tenaris provides an unmatched worldwide industrial and customer support system. Tenaris customers also receive added value through managed manufacturing flows that allow the company to simultaneously produce steel pipes of consistent quality for a customer project from several different strategically located mills. This managed process reduces the manufacturing time and ensures that orders are filled on time and on budget. Reduced total cost of ownership (TCO) is another added value customers receive. Because deepwater offshore operations and complex onshore projects involve tremendous costs, recapturing these costs can positively impact an operator s bottom line. Therefore, Tenaris provides complete supply chain management that simplifies logistics, creates flexibility and ensures a streamlined approach to lower operator TCO and create a seamless process from purchase to delivery. If your current or future plans involve deepwater, ultra-deepwater, or complex onshore projects, Tenaris can help you meet any challenge you encounter by offering complete tubular packages and solutions that deliver the ultimate in performance and reliability during the life of the project. You can learn more about Tenaris onshore and offshore solutions by visiting the company website at www.tenaris.com or by emailing a request for information to pipeline@tenaris.com. A representative will be glad to show you how Tenaris can make a difference on your next project. Offshore and Onshore Pipeline Solutions 17
www.tenaris.com Version 03 / July 2012. Tenaris. All rights reserved. pipeline@tenaris.com Tenaris has produced this Offshore and Onshore Pipeline Solutions for general information only. While every effort has been made to ensure the accuracy of the information contained within this publication, Tenaris does not assume any responsibility or liability for any loss, damage, injury resulting from the use of information and data herein. Tenaris products and services are only subject to the Company s standard Terms and Conditions or otherwise to the terms resulting from the respective contracts of sale, services or license, as the case may be. The information in this publication is subject to change or modification without notice. For more complete information please contact a Tenaris s representative or visit our website at www.tenaris.com. This Brochure supersedes Version 01/ April 2010. Tenaris 2010. All rights reserved.