1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 PWCOGN PRICE LIST 2015-2016 SUJECT TO CHNGE PROCESS OR GUNSMITHING PPLICTION SEE OTTOM OF PGE FOR NOTS (NOTICE TO LL SHOOTERS) Some parts may require refinishing after adjustments are made. COST GLOCK FIRERMS Street ction Job $115.00 Porting Depends on arrel Length -2 port $145.00-3 port $150.00 Throat and Polish Feed Ramp $45.00 Fitting ftermarket arrels $150.00 Jewel arrel Chamber $50.00 Fitting ftermarket Parts $35.00 Fit mbidextrous Parts $65.00 Custom Made ccessories (Minimum) $95.00 Stippling Handgrip $90.00 Fit Replacement Sights in Original Cuts - MINIUM $50.00 Grip Reduction $145.00 Round ottom Front of Trigger Guard $25.00 Trigger Guard Undercut $20.00 Remove Finger Grooves $50.00 SIG-SUER FIRERMS Street ction Job $100.00 Porting - 2 0r 3 Ports Depends on Model $135.00 Throat and Polish Feed Ramp $45.00 ftermarket arrels $150.00 Jewel arrel Chamber $50.00 Hammer or Trigger $40.00 Funnel The Magazine Well $65.00 ftermarket Parts $35.00 Fit mbidextrous Parts $65.00 Custom Made ccessories (Minimum) $95.00 Stippling Front or ack Strap $130.00 Night Sight Installation (Factory) $55.00 Fit Replacement Sights in Original Cuts Minimum $50.00 ROWNING ND E Street ction Job $115.00 Competition Single ction Only E... $140.00 Porting - 2 or 3 Ports Depends on Model $135.00 Throat and Polish Feed Ramp $45.00 Fitting ftermarket arrels $150.00
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 Jewel arrel Chamber $50.00 Jewel Hammer or Trigger $40.00 Stippling Front Strap $130.00 Stippling ack Strap $130.00 Checkering Front Strap (40 LPI) rowning HP $260.00 Checkering ack Strap (40 LPI) rowning HP $260.00 The Magazine Well $85.00 eavertail Grip Custom Welded $180.00 Fitting ftermarket Parts $35.00 Fit mbidextrous Parts $65.00 Custom Made ccessories (Minimum) $95.00 Night Sight Installation (Factory) $55.00 Fit Replacement Sights in Original Cuts Minimum $50.00 ERETT, TURUS, S&W, KHR Street ction Job $115.00 Porting - 2 0r 3 Ports Depends on Model $135.00 Throat and Polish Feed Ramp $45.00 Fitting ftermarket arrels $150.00 Jewel arrel Chamber $50.00 Funnel The Magazine Well $35.00 Fitting ftermarket Parts $35.00 Fit mbidextrous Parts $65.00 Custom Made ccessories (Minimum) $95.00 Stippling Front or ack Strap CLL FOR PRICING Night Sight Installation (Factory) $50.00 Fit Replacement Sights in Original Cuts Minimum $50.00 GENERL SMITHING REVOLVERS MGN Porting $135.00 Internal arrel Comp on pplicable Revolvers $230.00 Thumb Latch for Speed Loaders $25.00 Install NO-DRILL Scopes and ases $30.00 ore sight and Zero scope (Labor) $35.00 Checker Front Of Trigger Guard $75.00 Shorten barrel and Reinstall Front sight $200.00 Number Cylinder Chambers $15.00 Champher Cylinder Chambers $20.00 Convert Square utt S&W (K,L,N) to K Frame Round utt $125.00 Smooth Serrated Trigger $35.00 obbed Hammer $50.00 Final Fitting Revolver arrel $95.00 Jewel Trigger or Hammer $50.00 Crane Lock Installed $40.00 evel Hammer Spur $30.00
92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 S &W Factory Safety Check and djustments If Part Needed $55.00 Parts and it s Labor not included Market price Street ction Job (Most merican Handguns) $95.00 Match Quality ction Job $190.00 3 Inch Comped ull arrel Outside Diameter Matches Frame $500.00 Round arrel Dovetail (Cut For Front Sight) $85.00 S & W Style Orange Cut into Factory Sight $65.00 Replace Orange Insert $35.00 Zero Firearm (all) Minimum Plus Cost of mmo $35.00 djust arrel and Cylinder Gap $50.00 Oversize Thumb Latch Market price Modify Thumb Latch For Speed-loaders $25.00 GENERL SMITHING - PPC REVOLVERS (ON YOUR FIRERM) GENERL SMITHING - PPC REVOLVERS (ON YOUR FIRERM) SEE NOTS: Complete with Crane Lockup Only $1,124.00 Complete with Triple Crane Lockup Only $1,279.00 Refinishing Sight Ribs $50.00 Shilen 1 in 14 Twist arrel DD $50.00 Integral Scope Mount Machined to arrel $175.00 Magna Porting $135.00 Compensator System with Cover sleeve $300.00 Internal arrel Comp - The internal comp uses 3/4of an inch of the barrel as the expansion $230.00 chamber COLT 1911 UTOMTIC PISTOL, CLONES ND MODELS NOTE: PRICES RE LOR ONLY ND DO NOT INCLUDE THE PRTS or FINISHING TRIGGER DJUSTMENTS ction Job $125.00 Install Rogers Mechanical Trigger System $351.00 Install ftermarket Triggers $30.00 SCOPE MOUNTING IPSC Pistols $120.00 SIGHT INSTLLTIONS (Front) Clark $50.00 Staked in Original Hole (repair) $35.00 Silver Soldered $50.00 Night Sight Installed (Staked) (+parts) $55.00 Cross Dovetail Front Sight Cuts $50.00
138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 COLORED SIGHT DOTS INSTLLED Single Dot Front Sight $30.00 Triple Dot $65.00 RER SIGHTS Novak Low Meld $90.00 KIMER Fixed Sight djustable Cut $90.00 KIMER Style o-mar Lo-Meld $90.00 S&W Style N Frame Sight Mod 27 into Dovetail $160.00 o Mar Style MCS Low melt Standard Cut $125.00 Combat Low Meld Shrouded Head o Mar Style $175.00 High Visibility Fixed Rear $35.00 High Visibility djustable Rear $35.00 Night Sights $55.00 We Sight in Your Firearm mmo not Included $35.00 Note: Origin of MELD, a blend of melt and weld, First Known Use: 1936 and it referred to the fittting of a part and welding of the part to structure CUSTOM CCESSORIES INSTLLED Minimum Labor $50.00 Extended Standard Thumb Safety $35.00 mbidextrous Safety s $40.00 eavertail Grip Safety (Wilson and S&) $75.00 eavertail Grip Safety (rown and STI) $95.00 Tune Extractors $20.00 Kreiger ccurail System $296.00 S & mbidextrous Magazine Release $50.00 Fit S & Magazine Guide to Frame $85.00 rown Maxi-Magwell $130.00 Over Size Stock ushings Per set $30.00 Extractors or Ejectors Installed and Fitted Labor only $20.00 djust High Cap Mag for Function (Plus ammo if needed) Each $60.00 LTERTION TO FRME ND SLIDE Square Trigger Guard $80.00 Funnel Magazine well $85.00 Custom Carry evel Package $75.00 Extreme Meld Down Clark Style Trigger guard $265.00 Relieve Grip Frame Under Trigger Guard $50.00 Tighten Frame and Slide $95.00 to 125.00 Lower Ejection Port $35.00 Flare Ejection port $35.00 Clark Giles djustable Slide Tightener $160.00 Skeletonize Slide (Per Cut) $45.00
184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 Flat Cut Top of Slide $50.00 Cocking serrations (Front of Slide) $150.00 Line Top of Slide (Slide must be flat cut first) $150.00 S & Para Ordinance (Magazine Guide) $100.00 COMPENSTOR SYSTEMS Single Chamber (One or two Ports) $400.00 Single Chamber (Three Ports) $425.00 Dual Chamber (Two Port) $475.00 Dual Chamber (Three Port) $525.00.00 Dual Chamber (Full Profile) $700.00 Guide Rod $25.00-100.00 Recoil springs $8.00 Match barrels $150-300.00 Fitting arrels See Prices bove. For.45 CP, 10MM, 40 S&W, or 38 Super compensator type systems. They include the following: 5 or 5-3/4 match barrel, Lower ejection port, new recoil spring, full length or extended configuration. CHECKERING ND STIPPLING NOTS Please Read: There may be EXTR CHRGES For Checkering and Stippling on specific brands as some manufacturers employ extra hardening techniques or unique alloys. The base prices above are for Colt and Springfield rmory 4140 standard type Chrome-Moly frames. The harder alloys results in increased tool wear and time by the pistol-smith/craftsman. This is entirely done by hand in the old world tradition. It is unmatched by machine type processes which look like they were done with a machine. DD: If you wish finer checkering with more lines than are usually standard for that particular position, please add 15% to the base price. DD: gain very hard aftermarket receivers like Caspian, and Kimber, or stainless steel frames, please add 25% to the base prices. FRONT GRIP FRME (20 Lines Per Inch) Checkering $200.00 Stippling $105.00 HIGH CPCITY FRMES (20 Lines Per Inch) EX: PR ORD Checkering Only $325.00 FRONT TRIGGER GURD (40 Lines Per Inch) Checkering $75.00 Stippling $40.00 MIN SPRING HOUSING (20 Lines Per Inch) Checkering $55.00 Stippling $40.00 LINE CK OF SLIDE (40 Lines Per Inch) LINE $45.00 CHECKERING CK OF SLIDE (40 lines Per Inch) Checkering $105.00
230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 RREL CHNGES ND LTERTIONS Fit Clark, King, National Match ushing to Your arrel $35.00 Throat arrel and Polish Feed Ramp $45.00 Hard Fitting arrel (Inc. re-welding lugs and barrel to bushing) $185.00 Frame Cut For Supported Ramp arrels DD $100.00 Fitting Match Grade arrel & ushing to your Firearm ( to 7 ) $170.00 Jewel Chamber of uto arrels $35.00 Laser Porting Semi- uto (Two ports) $145.-$150.00 CUSTOM CRRY and SELF-DEFENSE WEPONS People buy carry guns with the hopes that they will never have to use them. Unfortunately there are times when reality sets in and the need is justified for self defense. Tailoring a carry firearm to the individual is a critical step in the process, more so, than for just punching holes in paper. The stakes are much higher and the stress requires a melding of the shooter and the firearm. COLT OFFICER and COMT COMMNDER STYLE FIRERMS Compensator system $325.00 New Colt arrel - ased on Market Price Guide Rod System (Parts and Labor) $100.00 S & Grip Safety $75.00 S & Magazine Guide (Part Only) $88.00 Trigger and ction Tune (Labor Only) $125.00 Carry evel Package $75.00 Extended Thumb Safety (Installation Only) $35.00 Checker Grip Frame (Starts t) $200.00 COLT 380 PISTOLS ction Job $125.00 obbing the Grip Tang (Prevents ite) $50.00 Carry evel (reaks all surface edges) $50.00 Checker (30L.P.I.) Front of grip $195.00 Novak Three Dot Sights (Installation Only) $140.00 McDougal Trigger $35.00 McDougal Guide Rod $50.00 CUSTOM CRRY REVOLVER MODIFICTIONS Note: Comp Systems on blued firearms require refinishing. Internal arrel Compensator (3 barrel only = OD of barrel) $235.00 ction Tuned for Street $95.00 evel Hammer $30.00 Custom 3 inch arrel with Compensator $500.00 Magna Porting $135.00
276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 COMPETITIVE UPGRDES FOR ullseye, World Speed, ianchi CUP RUGER COMPETITION PISTOLS Compensator System $300.00 Trigger Job $130.00 Chrome Plating Starts at: $200.00 Williams djustable Target Sights (Installed plus parts) $105.00 Custom Under Shroud $305.00 Clark Premium arrel Plus Installation $176.00 to $246.00 Front Sights Installed $60.00 COWOY CTION SHOOTING SINGLE CTION REVOLVERS (TUNING the CTION by RND) New Model Ruger s with grip frame locking mechanism DD $25.00 Ruger or Colt $130.00 Italian Manufactured Colts $160.00 isley Frames (please add) $20.00 Re-install or Replace Front Sight $70.00 Cut and Crown arrels $90.00 Fanning Hammer Spurs for Fast Draw Modify, djust Rear sight $95.00 Ruger - Fast Draw For Cowboy ction $185.00 THE ERNIE HILL STYLE FST DRW REVOLVER CONVERSION Complete fast draw conversions on your old model Ruger 357 Magnum which duplicates the Ernie Hill style which made him famous. $1545.00 on your supplied firearm LEVER CTION RIFLES Nickel or Chrome Plating of Receiver, Lever and ssembly Starts at: $200.00 Nickel Stained Receiver to Replicate Case Hardening (add) $60.00 Saddle Rings $40.00 Peep Sights Installed on Tang $75.00 Trigger Pull Lightened $95.00 Smooth Entire Lever ction System, includes ction Job to Competition Level and Hard Chrome $230.00Plate ction Parts Shorten arrel and Magazine Tube and Re-install Front Sight $305.00 SHOTGUNS FOR COWOY CTION CUT ND CROWN RRELS Single arrel $60.00 Double arrels $120.00 Nickel or Chrome Receiver Start at: $228.00 Nickel Stain Receiver to look like Case Hardening Double arrel (additional fee) $88.00 EXTEND and Polish Forcing Cones Single arrel $100.00 Smooth Opening of Double arrel, Includes ction Job $250.00 Regular ction Job $125.00
321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 RIFLES for SPORT, HUNTING, DEFENSE, SHOTGUN SMITHING REMINGTON 1100, 1187, and 870 Drilling and Tapping for Scope Mount ases ( 4 Hole version) $84.00 Scope Mounting and Installation $55.00 Trigger djustment, most Remington s, uto and Pump $95.00 Cogan arrel porting System $135.00 Jewel Finish the olt $80.00 Cut and Crown Shotgun arrel $60.00 Cut and Crown Double arrel Shotgun $120.00 Oversize Safety Installed $30.00 Gas Ports Enlarged $35.00 Clean Oil and Test Fire Single arrel $45.00 to $85.00 Double arrel, Clean Fire, Oil and Test $75.00 to $125.00 Open Ejection Ports $50.00 Extend Forcing Cones and polish $100.00 10 Shot Magazine Extension $55.00 Install Front Sight ead (ead Extra) $25.00 Sun Spot Front Sight and Millet Rear Fiber optic Front Sight $60.00 RIFLE SMITHING Clean Oil and Function Test by Staff $45.00 to $85.00 Scope ase and Ring Installation $55.00 Zero Scope (Live Fire plus mmo) $50.00 Reshape olt Handle to Clear Scope (need both rifle and scope) $100.00 Supply and Install olt handle for Scope on MILITRY Rifles $125.00 ore- Sight Rifle with Laser $35.00 Drilling and Tapping Per Hole $16.00 Drilling and Tapping Set-up per Job $20.00 Recoil Pad Installation (No Stock lterations) $45.00 Recoil Pad Installation (Cut Stock, pull length or for Kids) $75.00 Jewel olt $75.00-$100.00 Checkering olt Heads (Per side) $50.00 Installing Sling Swivels One Piece Stock $50.00 Installing Sling Swivels - Two Piece Stock $50.00 Cut and Crown Rifle arrels $50.00 Custom Design Rifle Compensator Starting at: $150.00 Threading arrels for Comps or Suppressors $100.00 Open Sight Installation, Per screw Hole $16.00 Open Sight Set up Fee $32.00 TRIGGER DJUSTMENTS POPULR RIFLES Remington Pump, Semi-uto $95.00 Remington, Winchester, Ruger, olt ctions $115.00
367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 R-15, Mini-14, and M1 $125.00 Install and djust ftermarket Triggers Starts at: $85.00 rowning R $115.00 SSULT RIFLE COMPENSTORS R-15 and M-16 Cogan Custom $90.00 M1 and M-14 Cogan Custom $70.00 ULL RRELED RUGER 10-22 RIFLES Re-barrel Rifle Installation $85.00 Re-Stock With Hogue Over Molded Stock Installed Includes Stock $125.00 Fancy thumb hole Stocks- Start at: $335.00 SSEMLY and DIS-SSEMLY 1911 Colts, Colt Clones, Semi-utos, Glock, Kel-Tec, & Standard Sig Pistols $45.00 S&W, Colt, Ruger & Taurus Revolvers $45.00 Desert Eagle, H&K, E & Springfield XD $60.00 to 75.00 Para-Ordnance LD Pistols $75.00 Thompson Center Pistols / S & W Revolver W/ New Safety $60.00 $60.00 XP100 Remington & Savage Strykers $55.00 $55.00 Remington Pump & Semi-uto Shotguns $45.00 rowning Pump & Semi or uto Shotguns $65.00 enelli & erretta Semi or utos Shotguns $75.00 Charles Daily Pump & Semi-uto Shotguns $55.00 Double arrel Shotguns Side-y-Side or Over & Under $85.00/hour verage cost of Double arrels $150.00 Remington & Ruger olt ction Rifles $50.00 Remington Pump & Semi-uto Rifles, Ruger Semi-uto Rifles $60.00 rowning Semi-uto, Lever or olt ction Rifles $75.00 Marlin, Winchester, Savage, & Mossberg Lever ction Rifles $60.00 to 75.00 Ruger Single Shot Rifle $85.00 Win. Mod 70/ Mauser/ Mil/ Weatherby, SKO, Tika Rifles $60.00 to 75.00 NOTS