www.portadoors.com Porta Products Catalogue

www.portadoors.com Porta Products Catalogue

Porta veneers classification Especially for our Clients we have developed a classification of finishes based on the European standards taking into account external factors which directly affect the door surface durability. The classification includes the following factors affecting the doors and veneers in everyday use: Abrasion Cleaning agents Humidity Daylight it is an inherent factor to any door usage. The doors are exposed to many knocks and scrapes associated with passage of people whose hands are often busy with documents or personal belongings and do not allow the use of the doors properly. The leaf surface must resist children games, and the pets do not spare the doors when waiting for their masters. both house and office cleaning work requires the use of cleaning agents which are not neutral for the surface durability. high air humidity affects veneer directly and the veneer resistance to this factor guarantees stability of the shape and uniformity of door surface throughout the whole door life time. this factor affects the changes of colour over a long period of use. We have tested for you all types of veneers and their reaction to daylight during many year operation and we may say with pride that our methods of door finishing give very good results throughout their whole lifetime. Porta classification takes onto account six groups which include all kinds of veneer used for Porta door ranges. Finishing quality, durability, aesthetics all of them are specified for each group and we hope that our classification will help make optimum choice and allow you to take best decision. With each presented product information on veneer used is provided: ECONOMIC Interior water-based varnish a class which is an ideal combination of quality and price. STANDARD Interior acrylic paint Porta basic class it ensures long service life for the household. STANDARD PLUS Veneers: Portadecor, decor Minimax extended Standard class with improved parameters of resistance to abrasion and humidity. PREMIUM Veneers: Portadur, natural standard, natural select, PVC, acrylic paint, water-based varnish (exterior) a class with the highest average parameters, which guarantee high functional value and are designed for use in residential buildings and offices. PROFESSIONAL Veneers: HQ CPL, polyester paint, PVC laminated steel sheet a class which combines functionality and elegance wherever the doors are exposed to a prolonged weather impact they are suggested for hotels, public buildings and offices. EXTREME Veneers: HPL, acidproof stainless steel a class with parameters which guarantee protection during intensive use of the models with this type of veneer it is designed for places where crowds of people pass every day. Buildings, residential spaces with a wide range of uses Hotels, offi ces, public buildings High traffi c places Resistance to weather ECONOMIC STANDARD STANDARD PLUS PREMIUM PROFESSIONAL EXTREME Class The diagram shows particular locations suggested by Porta for doors with different types of veneer.

Should any one attempt to write a history of doors based on the wealth of door descriptions, designs and styles specific for different periods of history and different places, this would be a fascinating story where social and political events affecting the fate of the world and personal meetings happened behind the doors, with doors in the background or somewhere in-between. We may say that doors represent an idea of a movable plane with the basic function intended to separate different rooms, this idea being enriched by human intervention from the very beginning. Therefore, the doors are not only a piece of an apartment or public space first of all, they accompany human everyday activities: at work, during rest time, in happiness, in conversation, when developing human relationships. Such an unexpected look at the doors allows us to discover their quite surprising function. Porta KMI Poland continues the best door production tradition and presents the catalogue PORTA DOORS which will reveal the most recent door industry achievements as far as styles, designs and technology are concerned. You will certainly be able to choose among so many ranges and to start telling your personal story. All models represent the highest quality of workmanship and operational reliability. We care about each detail of our products as the Clients satisfaction is rewarding for the whole team of Porta KMI Poland. Porta KMI Poland Sp. z o.o. Szkolna str. 26, 84-239 Bolszewo, Poland phone: +48/58 677 81 00, fax: +48/58 677 81 99 e-mail info@porta.com.pl www.portadoors.com

INDEX Interior doors Flush door leaves MINIMAX............................................... 6 Flush door leaves With applications......................................... 8 Embossed door leaves LONDON, VIENNA.................................... 10 Embossed wardrobe door leaves OXFORD, GENEVA........................... 12 Flush door leaves Porta DECOR............................................ 14 Flush door leaves Porta GRANDDECO....................................... 16 Flush door leaves Porta STYLE............................................. 18 Flush door leaves Porta FOCUS............................................ 20 Flush door leaves CPL laminated.......................................... 22 Flush door leaves Porta NOVA............................................. 24 Flush door leaves Porta FIT............................................... 30 Flush door leaves Porta LINE.............................................. 34 Flush door leaves SLOT-MILLED........................................... 36 Panel door leaves Porta CONCEPT......................................... 38 Interior door leaves in natural veneer Flush door leaves Porta CLASSIC.......................................... 42 Panel door leaves MADRID, CORDOBA...................................... 44 Panel door leaves TOLEDO, SEVILLA........................................ 46 Side panels............................................................ 48 Flush door leaves Nova NATURE........................................... 50 Flush door leaves Nature LINE............................................ 56 Flush door leaves Nature TREND.......................................... 58 Flush door leaves Nature STYLE........................................... 60 Flush door leaves Nature SPACE........................................... 62 Flush and panel door leaves Nature CONCEPT................................ 64 Sliding systems, folding doors PORTA sliding door system, ALU sliding door system................... 70 COMPACT sliding door system..................................... 72 ALPHA, BETA folding doors........................................ 74 OMEGA double-leaf sliding doors................................... 76 Interior entrance doors AGATE, OPAL reinforced doors............................................ 80 QUARTZ fire-resistant doors.............................................. 82 GRANITE anti-theft C class doors......................................... 84 Exterior doors GDANSK, SZCZECIN, TORUN doors......................................... 88 ROMA metal doors...................................................... 90 WROCLAW doors...................................................... 92 GDYNIA doors......................................................... 94 Transoms for exterior doors.............................................. 96 Technical and metal doors 27 db, 32 db sound retardant doors....................................... 100 42 db sound retardant doors............................................. 102 EI 30, EI 60 fire resistant doors........................................... 104 ENDURO............................................................. 106 AQUA............................................................... 108 Metal door leaves..................................................... 110 EI 30 fire resistant metal doors........................................... 112 Door frames MINIMAX door frame................................................... 116 Porta SYSTEM door frame............................................... 118 PRESTIGE door frame.................................................. 120 Transoms............................................................ 122 Angle-bar small, large door frame, large folding door frame..................... 124 Adjustable metal door frame............................................ 126 AGATE, OPAL door frame, METAL sliding door system......................... 128 PROJECT door frame................................................... 130 Accessories and dimensions Handles.............................................................. 132 Masking architraves, additional equipment................................. 134 Door assembly dimensions............................................... 137 Door sizes tables....................................................... 138 Other information Porta CONTRACT (non-standard offer)..................................... 143 new collection! new collection! new collection! new collection! new collection! new colors! new colors!

INTERIOR doors From the very beginning Porta KMI Poland has specialized, and still does, in internal doors intended for indoor use in apartments and offices. It should be noted that internal doors cannot be installed as apartment entrance doors or wherever temperature and humidity conditions are adverse. A wide range allows each Customer to find a leaf model of interest both in terms of design and price. We offer flush doors finished with paint, wide colour palette of laminates, synthetic and natural veneer, as well as frame-and-panel doors finished with natural veneer. High quality is the common feature of particular models. Customers may be sure that they will purchase the highest quality product regardless the price. MINIMAX With applications Embossed Wardrobe Porta DECOR Porta GRANDDECO Porta STYLE Porta FOCUS Laminated CPL Porta NOVA Porta FIT new collection! Porta LINE Slot-Milled Porta CONCEPT new collection! Enjoy the quality!

MINIMAX PORTA recommends MINIMAX doors represent an attractive range for the Customers who do not accept a compromise between lower price and reduced product quality. We are the only company in Poland to offer popular white doors for which we use the double painted eucalyptus wood panel the best for this purpose. 6 full small light large light small sash medium sash

Acrylic paint (interior) White (RAL9016) Water-based varnish (interior) DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood fi lled with stabilizing honeycomb core or perforated chipboard reinforced with inner frame made of plywood (option at an extra charge) and covered from both sides with HDF boards. LEAF EDGE PROFILE K profi le leaf edge (white and apple tree) and R profi le leaf edge (beech). Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. Beech Apple tree Door leaves cross sections FINISHING The leaf is painted with new generation ecological water varnish. The light frame (made from MDF) and the sash frame (made of PVC) are made in the colour of the door leaf. MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price two standard pintle hinges three hinges for a leaf of dimension 100 and 110 lock: for regular key, bathroom lock or for cylinder insert pane (pattern chinchilla ) preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100, 110 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Minimax door frame, fi xed width: 60 mm and 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Metal door frame honeycomb stabilizing NOTES: Paint-it-yourself leaves at the price of the Minimax white leaf. perforated chipboard 1 Available with perforated chipboard core only. Pane s dimensions are the same as for 100 size. 2 Arbitrary selection of door leaf sizes for double doors. Additional charges (option) 100, 110 size core: perforated chipboard ventilation grid, sleeves or ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 bull s eye made from stainless steel hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon mat hardened pane small light mat hardened pane large light mat hardened pane small sash mat hardened pane medium sash 7

With applications PORTA recommends The basic feature of the doors with applications is their solid construction based on the MINIMAX leaf. The possibility to choose decoration elements in two colours is another distinctive feature of this model. 8 pattern 1 pattern 2 pattern 3 pattern 4 pattern 5 pattern 6

Acrylic paint (interior) White (RAL9016) Application colours - veener Blue Beech Door leaves cross sections DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood fi lled with stabilizing honeycomb core or perforated chipboard reinforced with inner frame made of plywood (option at an extra charge) and covered from both sides with HDF boards. LEAF EDGE PROFILE K profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The leaf is painted with new generation ecological water varnish. MODELS Single leaf: full Double leaves: full Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price two standard pintle hinges three hinges for a leaf of dimension 100 and 110 lock: for regular key, bathroom lock or for cylinder insert preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100, 110 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Minimax door frame, fi xed width: 60 mm and 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Metal door frame 1 Available with perforated chipboard core only. 2 Arbitrary selection of door leaf sizes for double doors. honeycomb stabilizing perforated chipboard Additional charges (option) 100, 110 size core: perforated chipboard ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon 9

LONDON, VIENNA PORTA recommends Classical design, elegance and high finish standard are typical features of London and Vienna doors. High durability and refined technology make the product reliable and popular. 10 LONDON, full LONDON, small light LONDON, medium sash LONDON, large sash VIENNA, full VIENNA, small light

Acrylic paint (interior) White (RAL9016) PVC veneer Light beech Alder Apple tree Golden wood grain surface structure DOOR LEAF CONSTRUCTION The door leaf is fi lled with stabilizing inserts and covered from both sides with embossed HDF boards. LEAF EDGE PROFILE R profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The leaf is double varnished with acrylic paint or veneered with PVC woodlike veneer (LONDON only). The light frame and sash (made of PVC) are veneered in the colour of a door leaf. MODELS LONDON (PVC veneer or varnished). VIENNA (only varnished). Single door: full, small light, medium sash, large sash. Double doors: full, medium sash, large sash. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price two standard pintle hinges lock: for regular key, bathroom lock or for cylinder insert pane (pattern chinchilla ) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90 Double leaf: 120 180 1 RECOMMENDED DOOR FRAMES (from page 116) Door frame, fi xed width: 60 mm and 100 mm Adjustable Porta SYSTEM door frame Metal door frame 1 Arbitrary selection of door leaf sizes for double doors. Door leaves cross sections stabilizing inserts Additional charges (option) ventilation grid, sleeves or ventilation undercut preparation for shortening up to 60 mm hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon VIENNA, medium sash VIENNA, large sash 11

OXFORD, GENEVA PORTA recommends The embossed design and finishes of OXFORD and GENEVA dressing room doors are inspired by LONDON and VIENNA range for which they are a perfect supplement. These models are used most often for recessed lockers. OXFORD OXFORD GENEVA GENEVA 12 (double-element) (quadruple-element) (double-element) (quadruple-element)

Acrylic paint (interior) White (RAL9016) PVC veneer Light beech Alder Apple tree Golden DOOR LEAF CONSTRUCTION The door leaf is fi lled with stabilizing inserts and covered from both sides with embossed HDF boards. LEAF EDGE PROFILE Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The leaf is double coated with acrylic water paint or veneered with PVC woodlike venner (OXFORD only). MODELS OXFORD (PVC veneer or varnished) GENEVA (only varnished) Double doors: full Quadruple doors: full ACCESSORIES included in the leaf price folding mechanism hinges varnished wooden handle LEAF SIZES (page 140, table 5) Double doors: 60, 70, 80, 90 Quadruple doors: 120, 140, 160, 180 DOOR FRAMES MDF door frame of constant breadth 70 mm, veneered with Portadecor veneer (white colour) or PVC woodlike veneer. wood grain surface structure NOTES: Possibility to short the door (in the bottom and higher part) up to 30 mm. Door leaves cross sections stabilizing inserts Additional charges (option) masking architraves 13

Porta DECOR PORTA recommends The basic qualities of this product range include durable construction and attractively priced high quality veneer. Porta DECOR doors perfectly fit both the residential and office spaces. 14 full small light large light small sash medium sash narrow light

Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Door leaves cross sections DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood fi lled with stabilizing honeycomb core or perforated chipboard reinforced with inner frame made of plywood (option at an extra charge) and covered from both sides with HDF boards. LEAF EDGE PROFILE K profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The door leaf is veneered with Portadecor veneer. MDF frame is veneered in the colour of a door leaf. Narrow light and sash frames (made of PVC) veneered in the colour of a door leaf. MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price two standard pintle hinges three hinges for a leaf of dimension 100 and 110 lock: for regular key, bathroom lock or for cylinder insert pane (pattern chinchilla ) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100, 110 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Minimax door frame, fi xed width: 60 mm and 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Metal door frame honeycomb stabilizing NOTES: Preparation for shortening, for an additional charge, applies only to honeycomb core leaves. The perforated chipboard and solid chipboard core leaves come with preparation for shortening as standard. perforated chipboard 1 Available only with the perforated chipboard core. Pane s dimensions are the same as for 100 size. 2 Arbitrary selection of door leaf sizes for double doors. Additional charges (option) 100, 110 size core: perforated chipboard ventilation grid, sleeves or ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 preparation for shortening up to 60 mm bull s eye made from stainless steel hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon mat hardened pane small light mat hardened pane large light mat hardened pane small sash mat hardened pane medium sash mat hardened pane narrow light 15

Porta GRANDDECO PORTA recommends Porta GRANDDECO is a classic design and a guarantee of an elegant interior. A simple form is a synonym for good taste. The models are addressed to the Customers who attach an importance to the tradition and who feel excellent in classically designed interiors. 16 pattern 1.1 pattern 1.2 pattern 1.3 pattern 2.1 pattern 2.2 pattern 2.3 pattern 3.1

Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Door leaves cross sections honeycomb stabilizing DOOR LEAF CONSTRUCTION In plain models (1.1, 2.1, 3.1, 4.1) the leaf core is made of stabilizing honeycomb or perforated chipboard reinforced with inner frame made of plywood (option at an extra charge). In other models the core is made of plain chipboard. The frame and the core are covered with HDF board on both sides. LEAF EDGE PROFILE K profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The door leaf is veneered with Portadecor veneer. MDF frame is veneered in the colour of a door leaf. MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price two standard pintle hinges three hinges for a leaf of dimension 100 and 110 lock: for regular key, bathroom lock or for cylinder insert pane (pattern chinchilla or hardened mat) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100, 110 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Minimax door frame, fi xed width: 60 mm and 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Metal door frame perforated chipboard NOTES: Preparation for shortening, for an additional charge, applies only to honeycomb core leaves. The perforated chipboard and solid chipboard core leaves come with preparation for shortening as standard. solid chipboard reinforced by plywood 1 Available only with the perforated chipboard core. Pane s dimensions are the same as for 100 size. 2 Arbitrary selection of door leaf sizes for double doors. Additional charges (option) 100, 110 size core: perforated chipboard ventilation grid, sleeves or ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 preparation for shortening up to 60 mm hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon pattern 3.2 pattern 4.1 pattern 4.2 17

Porta STYLE PORTA recommends The distinctive features of this range include many decorative qualities while preserving individual approach to the interior. The design, which meets high requirements of the Customers, allows the creation of an interesting decor effect. 18 pattern 1 pattern 2 pattern 3 pattern 4 pattern 5 * At the price of glazed models there are available door leaves with panels (thickness 8 mm, veneered on both sides).

Portadecor veneer Grey Euroinvest HQ CPL veneer White Milano 1 Beech Bavaria Grey Euroinvest Milano 2 Alder Beech Porta Milano 3 Cherry tree Pear tree Walnut Wenge Mahogany Maple Walnut Milano 4 Door leaves cross sections honeycomb stabilizing Milano 5 DOOR LEAF CONSTRUCTION In models (1, 2, 3 and 4) the leaf core is made of stabilizing honeycomb core or perforated chipboard reinforced with inner frame made of plywood (option at an extra charge). In model 5, the leaf core is made of solid chipboard. The frame and the core are covered with HDF board on both sides. LEAF EDGE PROFILE K profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The door leaf is veneered with Portadecor veneer or HQ CPL veneer. MDF frame is veneered in the colour of a door leaf. MODELS Glazed leaves. Leaves with panel (with 8 mm thick panel veneered from both sides). Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price two standard pintle hinges three hinges for a leaf of dimension 100 and 110 lock: for regular key, bathroom lock or for cylinder insert pane (pattern chinchilla or hardened mat) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100, 110 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Minimax door frame, fi xed width: 60 mm and 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame (Portadecor veneer only) Metal door frame perforated chipboard NOTES: Sizes 100 and 110 are not available for model 5. Two sleeve rows are not available for model 5. Preparation for shortening, for an additional charge, applies only to honeycomb core leaves. The perforated chipboard and solid chipboard core leaves come with preparation for shortening as standard. solid chipboard reinforced by plywood 1 Available only with the perforated chipboard core. Pane s dimensions are the same as for 100 size. 2 Arbitrary selection of door leaf sizes for double doors. Additional charges (option) 100, 110 size core: perforated chipboard ventilation grid, sleeves or ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 preparation for shortening up to 60 mm hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon 19

Porta FOCUS PORTA recommends Glazed models are designed for people who value and appreciate the freedom of space, for whom natural light plays an important role in planning the interior. Porta FOCUS are directed for those who wish to make their homes standing out through modern and exceptionally attractive style of interior design. 20 pattern 1.B pattern 1.C pattern 1.D pattern 1.E pattern 2.A pattern 2.B pattern 2.C

Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Door leaves cross sections DOOR LEAF CONSTRUCTION The door leaf is fi lled with stabilizing honeycomb core or perforated chipboard reinforced with inner frame made of plywood (option at an extra charge). Frame with fi ling is covered from both sides with HDF board. In glazed models is used hardened mat pane with a thickness 8 mm, which is an element of door construction. LEAF EDGE PROFILE K profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The door leaf is veneered with Portadecor veneer. MDF frame is veneered in the colour of a door leaf. MODELS Single-or double-leaf in all patterns. Single-leaf sliding door are made without hinges and rebate. The lower part of the frame has a grove for the fl oor-mounted guide (included in the system). Door leaves from group 2 have an additional c-section metal rail on the leaf for guiding. ACCESSORIES included in the leaf price two standard pintle hinges three hinges for a leaf of dimension 100 and 110 lock: for regular key, bathroom lock or for cylinder insert hardened mat pane (width, not dependent on leaf size) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100, 110 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Minimax door frame, fi xed width: 60 mm and 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Metal door frame honeycomb stabilizing NOTES: Ventilation undercut and grid are available only in full door leaves from group 1. Preparation for shortening, for an additional charge, applies only to honeycomb core leaves from group 1. The perforated chipboard and solid chipboard core leaves come with preparation for shortening as standard. perforated chipboard 1 Available only with the perforated chipboard core. 2 Arbitrary selection of door leaf sizes for double doors. Additional charges (option) 100, 110 size core: perforated chipboard ventilation grid, sleeves or ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 preparation for shortening up to 60 mm hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon pattern 2.D pattern 2.E 21

HQ CPL laminated PORTA recommends This product is applied for all types of interiors, especially in places where the doors are subject to heavy traffic with suggested usage in hotels, offices, public buildings, and - last but not least - high standard apartments. The door leaf and frame are covered with HQ CPL veneer, which ensures the highest quality and guarantees many years of comfortable and reliable door use (Long Life Product). 22 pattern 1.1 pattern 1.2 pattern 1.3 pattern 5.1 pattern 5.2

HQ CPL veneer White Milano 1 Grey Euroinvest Milano 2 Beech Porta Milano 3 Mahogany Maple Walnut Milano 4 Door leaves cross sections honeycomb stabilizing Milano 5 DOOR LEAF CONSTRUCTION The door leaf consists of: a fi nger jointed softwood fi lled with stabilizing honeycomb core or perforated chipboard reinforced with inner frame made of plywood (option at an extra charge) group 1; group 5 solid chipboard. The frame and the core are covered with HDF board on both sides. LEAF EDGE PROFILE K profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The leaf is veneered with veneers: HQ CPL (Continuous Pressure Laminate High Quality) laminate 0.2 or 0.7 mm thick. MDF frame is veneered in the colour of a door leaf. MODELS Single and double leaf: in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element, slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price two standard pintle hinges three hinges for a leaf of dimension 100 and 110 lock: for regular key, bathroom lock or for cylinder insert pane (pattern chinchilla ) preparation for shortening up to 60 mm (group 5 only) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100, 110 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Minimax door frame, fi xed width: 100mm Adjustable Porta SYSTEM door frame Metal door frame perforated chipboard NOTES: Grid, ventilation sleeves 2 rows are available in patterns from group 1 only. Preparation for shortening, for an additional charge, applies only to honeycomb core leaves. The perforated chipboard and solid chipboard core leaves come with preparation for shortening as standard. solid chipboard reinforced by plywood 1 Available only with the perforated chipboard core. Pane s dimensions are the same as for 100 size. 2 Arbitrary selection of door leaf sizes for double doors. Additional charges (option) 100, 110 size core: perforated chipboard ventilation grid, sleeves or ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 preparation for shortening up to 60 mm (group 1) bull s eye made from stainless steel (pattern 1.1) hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon each hardened mat pane (pattern 1.2 and group 5) mat hardened pane (pattern 1.3) pattern 5.3 pattern 5.4 pattern 5.5 23

Porta NOVA PORTA recommends High quality materials, attractive and popular design, and various types of glazings are the main advantages of this proposal. Porta NOVA is a combination of durability and the charm of walnut wood. Models included in this range are used both in the residential and office spaces, and the veneer with wood grain pattern improves the aesthetics of any area. 24 pattern 1.1 pattern 1.2 pattern 1.3 pattern 2.1 pattern 2.2 pattern 3.1

Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 Door leaves cross sections honeycomb stabilizing DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood fi lled with: for group 1 stabilizing honeycomb core or perforated chipboard reinforced with inner frame made of plywood (option at an extra charge); for group 2 and 3 solid chipboard. Frame with fi lling is covered from both sides with HDF board. LEAF EDGE PROFILE K type door leaf edge profi le. Both sides and the top of a door leaf are veneered with skirting tape in the colour of a door leaf. FINISHING The door leaf is veneered with Portadur veneer with characteristic vertical-horizontal wood grains. The light frame is veneered. MODELS Single and double doors: in all patterns of each group. Full, glazed or ready for glazing. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert three standard pintle hinges pane (pattern chinchilla ; ribbed glass 1 ; mat hardened ) preparation for shortening up to 60 mm (2 and 3 group only) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 2 Double leaf: 120 200 3 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Minimax door frame, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame perforated chipboard NOTES: Grid, ventilation sleeves 2 rows available in patterns from group 1 only. Preparation for shortening, for an additional charge, applies only to honeycomb core leaves. The perforated chipboard and solid chipboard come with preparation for shortening as standard. 1 Not available for pattern 2.2 2 Size 100 available only with vertical wood grains in group 1 and 3. 3 Arbitrary selection of door leaf sizes for double doors. solid chipboard reinforced by plywood Additional charges (option) 100 size core: perforated chipboard ventilation grid, sleeves or ventilation undercut preparation for shortening up to 60 mm (group 1) bull s eye made from stainless steel (pattern 1.1 only) hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon pattern 3.2 25

Porta NOVA PORTA recommends High quality materials, attractive and popular design, and various types of glazings are the main advantages of this proposal. Porta NOVA is a combination of durability and the charm of walnut wood. Models included in this range are used both in the residential and office spaces, and the veneer with wood grain pattern improves the aesthetics of any area. 26 pattern 4.1 pattern 4.2 pattern 4.3 pattern 4.4 pattern 5.1 pattern 5.2

Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger-jointed softwood or MDF frame covered from both sides with HDF boards, fi lled with solid chipboard. LEAF EDGE PROFILE K type door leaf edge profi le. Both sides and the top of a door leaf are veneered with skirting tape in the colour of a door leaf. FINISHING The door leaf is veneered with Portadur veneer with characteristic vertical-horizontal wood grains. The light frame is veneered. MODELS Single and double doors: in all patterns of each group. Full, glazed or ready for glazing. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert three standard pintle hinges pane (pattern chinchilla ; ribbed glass ; mat hardened ) preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Minimax door frame, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame 1 Size 100 available only with vertical wood grains. 2 Arbitrary selection of door leaf sizes for double doors. Door leaves cross sections solid chipboard reinforced by plywood Additional charges (option) 100 size ventilation undercut or ventilation sleeves (1 row) hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon pattern 5.3 pattern 5.4 pattern 5.5 27

Porta NOVA Design inspired by the application of Module RETRO - details, see page 118-119. PORTA recommends High quality materials, attractive and popular design, and various types of glazings are the main advantages of this proposal. Porta NOVA is a combination of durability and the charm of walnut wood. Models included in this range are used both in the residential and office spaces, and the veneer with wood grain pattern improves the aesthetics of any area. 28 pattern 6.1 pattern 6.2 pattern 6.3 pattern 6.4 pattern 6.5 pattern 7.1 pattern 7.2

Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger-jointed softwood or MDF frame covered from both sides with HDF boards, fi lled with solid chipboard. LEAF EDGE PROFILE K type door leaf edge profi le. Both sides and the top of a door leaf are veneered with skirting tape in the colour of a door leaf. FINISHING The door leaf is veneered with Portadur veneer with characteristic verticalhorizontal wood grains. The light frame and sash (from PVC) are veneered in the colour of a door leaf. MODELS Single and double doors: in all patterns of each group. Full, glazed or ready for glazing. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert three standard pintle hinges pane pattern ( chinchilla ; mat hardened ) preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Minimax door frame, fi xed width: 100mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame NOTES: Grid, ventilation sleeves 2 rows available in patterns 6.5, 7.5 only. Door leaves cross sections 1 Size 100 is available only with vertical wood grains. 2 Arbitrary selection of door leaf sizes for double doors. solid chipboard reinforced by plywood Additional charges (option) 100 size ventilation grid, sleeves or ventilation undercut hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon pattern 7.3 pattern 7.4 pattern 7.5 29

Porta FIT PORTA recommends novelty Porta FIT is a tailor made, wide range of products adjusted to individual requirements of each and every customer. The collection was prepared in 25 colors and in 3 different qualities of fi nishing ranging from the economical and priceattractive version in Portadecor veneer, through an effective veneer Portadur of high utility,up to extremely resistant and giving a guarantee of multi-use CPL HQ veneer. CPL HQ laminate is a material from Long Life Product category used in the apartments of a higher standard and wherever the doors are exposed to intensive use, such as hotels, offi ce buildings and other public utility spaces. 30 pattern A.2 pattern A.6 pattern B.2 pattern B.5 pattern C.1 pattern C.3

Portadecor veneer Grey Euroinvest Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 HQ CPL veneer White Milano 1 Beech Bavaria Grey Euroinvest Milano 2 Alder Beech Porta Milano 3 Cherry tree Pear tree Walnut Wenge Mahogany Maple Walnut Milano 4 Door leaves cross sections Milano 5 DOOR LEAF CONSTRUCTION In patterns A, B and C the door leaf is fi lled with combination of honeycomb core and stabilizing board or fully with solid chipboard (option at an extra charge). In pattern D the standard door leaf fi lling is solid chipboard. The frame and the core are covered with HDF board on both sides. Door leaves are also equipped by either a pane or fl at panel (8 mm thick HDF board veneered from both sides). LEAF EDGE PROFILE K profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The leaf is covered with Portadecor veneer, Protadur veneer (vertical wood grains) or CPL HQ (Continuous Pressure Laminate High Quality) 0,2 mm laminate. MDF frame is available in two profi les depending on veneer type (different for CPL HQ) and is veneered in the colour of a door leaf. MODELS Single and double leaf: in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price two pintle hinges standard three pintle hinges standard for a leaf of dimension 100 and in Portadur lock: for regular key, bathroom lock or for cylinder insert pane (pattern hardened 1 mat or chinchilla ) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Minimax door frame, fi xed width: 60 mm (only Portadecor veneer) and 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame (only Portadecor and Portadur veneer) Metal door frame honeycomb stabilizing 1 Because of small size, the pane in pattern A is not hardened 2 Arbitrary selection of door leaf sizes for double doors. solid chipboard reinforced by plywood Additional charges (option) 100 size core: solid chipboard ventilation grid, sleeves or ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 preparation for shortening up to 60 mm hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon pattern D.1 pattern D.3 31

Porta FIT PORTA recommends novelty Porta FIT is a tailor made, wide range of products adjusted to individual requirements of each and every customer. The collection was prepared in 25 colors and in 3 different qualities of fi nishing ranging from the economical and priceattractive version in Portadecor veneer, through an effective veneer Portadur of high utility,up to extremely resistant and giving a guarantee of multi-use CPL HQ veneer. CPL HQ laminate is a material from Long Life Product category used in the apartments of a higher standard and wherever the doors are exposed to heavy use, such as hotels, offi ce buildings and other public utility spaces. 32 pattern E.0 pattern E.3 pattern F.2 pattern F.6 pattern G.2 pattern G.5

Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree DOOR LEAF CONSTRUCTION The door leaf is fi lled with combination of honeycomb core and stabilizing board or fully with solid chipboard (option at an extra charge). The frame and the core are covered with HDF board on both sides. Door leaves are also equipped by either a pane or fl at panel (8 mm thick HDF board veneered from both sides). LEAF EDGE PROFILE K profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. Pear tree Walnut Wenge Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 HQ CPL veneer FINISHING The leaf is covered with Portadecor veneer, Protadur veneer (vertical wood grains) or CPL HQ 0,2 mm laminate (Continuous Pressure Laminate High Quality). MDF frame is available in two shapes of profi le depending on veneer (different for CPL HQ) and is veneered in the colour of a door leaf. MODELS Single and double doors: in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). White Milano 1 Grey Euroinvest Milano 2 Beech Porta Milano 3 Mahogany Maple Walnut Milano 4 Milano 5 ACCESSORIES included in the leaf price two pintle hinges standard three pintle hinges standard for a leaf of dimension 100 and in Portadur lock: for regular key, bathroom lock or for cylinder insert pane (pattern hardened mat or chinchilla ) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 1 Double leaf: 120 200 2 Door leaves cross sections RECOMMENDED DOOR FRAMES (from page 116) Minimax door frame, fi xed width: 60 mm (only Portadecor veneer) and 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame (only Portadecor and Portadur veneer) Metal door frame honeycomb stabilizing NOTES: Sizes 80, 90 in models E.0; E.3; F.2; F.6; G.2; G.5; H.1; H.4 (German and Hungarian norm) available only with vertical wood grains. 1 Size 100 is available only with vertical wood grains. 2 Arbitrary selection of door leaf sizes for double doors. solid chipboard reinforced by plywood Additional charges (option) 100 size core: solid chipboard ventilation grid, sleeves or ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 preparation for shortening up to 60 mm hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon pattern H.1 pattern H.4 33

Porta LINE PORTA recommends Unique character of the Porta LINE doors is underlined by aluminum marquetry on the leaf s surface. Models from this collection are available in a wide range of colors, with exceptionally durable HQ CPL (High Quality Continuous Pressure Laminate) and Portadur veneers, which makes the product suitable for use not only in residential applications, but also in offices and hotels. 34 pattern A.1 pattern A.3 pattern B.1 pattern C.1 pattern D.1 pattern E.1

Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 HQ CPL veneer White Milano 1 Grey Euroinvest Milano 2 Beech Porta Milano 3 Mahogany Maple Walnut Milano 4 Door leaves cross sections Milano 5 DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood fi lled with stabilizing honeycomb core or perforated chipboard reinforced with inner frame made of plywood. The frame and the core are covered, on both sides, with an HDF board. The leaves come equipped with 6 mm thick aluminum marquetry (silver or golden). LEAF EDGE PROFILE K profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The leaf is covered with 0.2 mm HQ CPL veneer (Continuous Pressure Laminate High Quality) with a vertical vein pattern, or with a Portadur veneer with a vertical or a vertical and horizontal vein pattern (pattern A.3). MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price two standard pintle hinges three hinges in the 100 width leaf and in all door sizes in Portadur veneer lock: for a regular key, with a bathroom lock or for cylinder insert round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100, 110 1 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Door frame, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame (tylko w okleinie Portadur) Metal door frame honeycomb stabilizing NOTES: Ventilation sleeves not available in pattern D.1. Preparation for shortening, for an additional charge, applies only to honeycomb core leaves. The perforated chipboard core and solid chipboard come with preparation for shortening as standard. perforated chipboard 1 Available only with the perforated chipboard core. Model A.3 impossible to comply with the size of 100 and 110. 2 Arbitrary selection of door leaf sizes for double doors. Additional charges (option) 100, 110 size core: perforated chipboard ventilation sleeves or ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 preparation for shortening up to 60 mm bull s eye made from stainless steel (not available in pattern E.1) hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon 35

SLOT-MILLED PORTA recommends To use this product to all types of premises, especially everywhere where the doors are exposed to intensive use. Suggested for hotels, office buildings, public places and houses with higher standard. Leaf with a door frame covered with CPL HQ veneers are guarantee the highest quality and comfort of a multi-use door (Long Life Product). 36 pattern A pattern B pattern C pattern D pattern E pattern F pattern G

HQ CPL veneer White Milano 1 Grey Euroinvest Milano 2 Beech Porta Milano 3 Mahogany Maple Walnut Milano 4 Milano 5 DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood frame fi lled with a perforated chipboard, reinforced with an internal plywood frame. The frame and the core are covered, on both sides, with an HDF board. LEAF EDGE PROFILE K profi e leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape. FINISHING The leaf is covered with 0.2 mm HQ CPL veneer (Continuous Pressure Laminate High Quality). MODELS 8 patterns: from A to H. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system) 1. ACCESSORIES included in the leaf price two standard pintle hinges three hinges for a leaf of dimension 100 lock: for regular key, bathroom lock or for cylinder insert preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Door frame, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Metal door frame NOTES: Depending on the veneer color, we offer two grove colors: light brown or dark brown. Door leaves cross sections 1 A, F and H designs in the sliding door version for an additional charge require to be ordered through the Contract Department. 2 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation undercut third hinge for the leaf dimensions 60, 70, 80 or 90 hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon pattern H 37

Porta KONCEPT PORTA recommends novelty Porta CONCEPT door range is up to date with the most recent trends in utility design. Popular models are based on a durable and fancy looking rail structure consisting of horizontal and vertical beams made of the highest quality wooden materials. This is an offer for those customers who expect doors in which wooden elements prevail in the door leaf structure. The collection is available in a wide color range of Portadecor veneers which helps to match the door to the individual interior design. 38 pattern A.0 pattern A.3 pattern A.9 pattern B.1 pattern C.0 pattern C.2 pattern C.6

Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge DOOR LEAF CONSTRUCTION Leaf frame is made of the highest quality wooden elements manufactured using warp-resistant blockwood technology. Depending on the model, the leaf is also provided with horizontal beams and Portadecor veneer coated panels with tempered matt glass panes. LEAF EDGE PROFILE K leaf edge profi le. Leaf edge is covered with leaf coloured skirting tape. FINISHING The leaf is covered with Portadecor veneer. MODELS Single-or double-leaf in all patterns. ACCESSORIES included in the leaf price three standard pintle hinges lock: for regular key, bathroom lock or for cylinder insert pane (pattern hardened mat) preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 Double leaf: 120 200 1 RECOMMENDED DOOR FRAMES (from page 116) MINIMAX door frame, fi xed width: 100 mm Adjustable Porta SYSTEM door frame PRESTIGE door frame 1 Arbitrary selection of door leaf sizes for double doors. Door leaves cross sections wooden construction - pine blockboard Additional charges (option) 100 size ventilation sleeves or ventilation undercut hook lock with side handles (for sliding doors) hinge covers (set on one pc) handle with escutcheon pattern K.0 pattern K.1 pattern K.3 39

INTERIOR doors in natural veneers Doors with natural veneer are made for large group of discerning clients, for whom natural beauty is of fundamental aesthetic value. Variety and individual character are highly sought after qualities of a product, after all, why would we want to live in homes that are all identical and replicated in millions of units? Just as every human being is different, so every tree is unique. Nature did not intend for identical live forms and shapes, and diversity in wood is testament to its natural pedigeree. We say that wood is still living and breathing, adjusting to its surroundings. Keeping in mind this information when appraising the quality of doors we want to purchase, it is important to consider the compromise between perfection in structure, color, and surface quality and natural beauty and unique patterns of wood. Porta KMI Poland, eager to meet the highest expectations of its clients, works with the best suppliers around the world. They represent well known and respected companies with decades of experience in manufacturing and distribution of natural veneers, such as: Danzer, J.u.A Frischeis, AB Bohmans, Fanerfabrik, Barlinek SA, and ALPI. Natural veneers chosen by us because of the aesthetic qualities they possess are divided into two main groups: Standard used in Porta CLASSIC, MADRID, CORDOBA, TOLEDO and SEVILLA collections. This is a group of natural veneers characterised by a variety of colors, ring patterns, knots and twists in fibres etc. Their character is a product of the natural environment the trees grew in, climatic conditions and habitat occurring within the same biological species. These morphological qualities of wood, characteristic of natural materials, set it apart from artificial fibre and as such do not constitute fl aws in design. Select used in Nova NATURE, Nature STYLE, Nature SPACE, Nature LINE, Nature TREND, Nature CONCEPT collections. This is a specially prepared and selected natural veneer characterised by high repetition in ring patterns and dye coloring. Products made with this type of covering meet the highest standards of quality sought by the most demanding clients. Porta CLASSIC MADRID, CORDOBA TOLEDO, SEVILLA Nova NATURE Nature LINE Nature STYLE Nature SPACE Nature TREND Nature CONCEPT Enjoy the quality!

Porta CLASSIC PORTA recommends Porta CLASSIC are plate doors veneered in natural veneer. The rich colors and interesting design makes it possible to satisfy the customer needs. We would like to draw your attention to the fact that a few discolorations of veneer and differences in wood grain are inherent in this group of products and prove their natural origin and the charm of true wood. 42 pattern 1.1 pattern 1.2 pattern 1.3 pattern 5.1 pattern 5.2 pattern 5.3

Standard natural veneer 1 2 3 4 5 Maple 1 Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 DOOR LEAF CONSTRUCTION Leaf frame is made from coniferous tree dressing. Leaf fi lling consists of perforated chipboard reinforced with an inside plywood rail. The frame, along with the fi lling is covered on both sides with a board plated with high quality natural veneer. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Four types of natural veneers: (two different patterns of wood grain design), Sapelli, Limba or Maple. The door leaf is painted in one out of several colours with ecologically safe water varnish and hardened using UV (light) technology. MODELS Single and double doors: in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert pane (pattern chinchilla or hardened mat ) preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 Double leaf: 120 200 1 RECOMMENDED DOOR FRAMES (patrz from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame NOTES: The recommended natural veneer door frames come equipped with a set of two Porta pintle hinges. The leaf is not equipped with the hinge part. Leaves available also in a non-painted version, at the price of the standard product. Ventilation sleeves available in silver or golden colour 1 row. Door leaves cross sections 1 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation sleeves, ventilation undercut drill for third hinge for the leaf dimensions 60, 70 or 80 bull s eye made from stainless steel(pattern 1.1 only) hook lock with side handles (for sliding doors) handle with escutcheon pattern 5.4 pattern 5.5 43

MADRID, CORDOBA Design inspired by the application of Module RETRO - details see page 118-119. PORTA recommends MADRID and CORDOBA models with their flush construction, natural veneer and unique technology present themselves perfectly in the indoor spaces where natural appearance combines with the elegance of classic design. We would like to draw your attention to the fact that a few discolorations of veneer and differences in wood grain are inherent in this group of products and prove their natural origin and the charm of true wood. 44 MADRID, full MADRID, small light MADRID, medium sash MADRID, large sash CORDOBA, full

Standard natural veneer Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 1 2 3 4 5 Pine 1 Pine 2 Pine 3 Pine 4 DOOR LEAF CONSTRUCTION The door leaf consists of a frame made of high quality wood, plywood and chipboard. Door leaf panel and frame are faced with one of four high quality natural veneers. External rail fi nished with veneer in the door leaf colour. The technology used gives a door leaf highly resistant to deformations. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING The door leaf is painted with ecologically safe water varnish and hardened using UV (light) technology. MODELS Single doors: full, glazed. Single door with side panel. Double doors: full, glazed. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert pane (pattern chinchilla ) pane fi xing seal round fl ush handle (for sliding doors) preparation for shortening up to 40 mm 1 LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Door frame in natural veneer, fi xed width: 100mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Door leaves cross sections NOTES: The recommended natural veneer door frames come equipped with a set of two Porta pintle hinges. The leaf is not equipped with the hinge part. Leaves available also in a non-painted version, at the lower price. Ventilation sleeves available in silver or golden colour 1 row. 1 Door leaf with ventilation slot shortening up to 20 mm. 2 Arbitrary selection of door leaf sizes for double doors. multilayer structure Additional charges (option) 100 size ventilation sleeves, ventilation undercut or slot drill for third hinge for the leaf dimensions 60, 70 or 80 hook lock with side handles (for sliding doors) closing trim for double door handle with escutcheon hardened mat pane (small light) hardened mat pane (medium sash) hardened mat pane (large sash) CORDOBA, small light CORDOBA, medium sash CORDOBA, large sash 45

TOLEDO, SEVILLA PORTA recommends TOLEDO and SEVILLA models with their flush construction, natural veneer and unique technology present themselves perfectly in the indoor areas where natural appearance combines with the elegance of classic design. We would like to draw your attention to the fact that a few discolorations of veneer and differences in wood grain are inherent in this group of products and prove their natural origin and the charm of true wood. 46 TOLEDO, full TOLEDO, pattern 1 TOLEDO, pattern 2 TOLEDO, pattern 3 TOLEDO, pattern 4 TOLEDO, pattern 5

Standard natural veneer Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 1 2 3 4 5 Pine 1 Pine 2 Pine 3 Pine 4 DOOR LEAF CONSTRUCTION The door leaf consists of a frame made of high quality wood, plywood and chipboard. Door leaf panel and frame are faced with one of four high quality natural veneers. External rail fi nished with veneer in the door leaf colour. The technology used gives a door leaf highly resistant to deformations. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING The door leaf is painted with ecologically safe water varnish and hardened using UV (light) technology. MODELS Single doors: full, glazed. Single door with side panel. Double doors: full, glazed. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert pane (pattern chinchilla ) pane fi xing seal round fl ush handle (for sliding doors) preparation for shortening up to 40 mm 1 LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 Double leaf: 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Door leaves cross sections NOTES: The recommended natural veneer door frames come equipped with a set of two Porta pintle hinges. The leaf is not equipped with the hinge part. Leaves available also in a non-painted version, at the lower price. Ventilation sleeves available in silver or golden colour 1 row. multilayer structure 1 Door leaf with ventilation slot shortening up to 20 mm 2 Arbitrary selection of door leaf sizes for double doors. Additional charges (option) 100 size ventilation sleeves, ventilation undercut or slot drill for third hinge for the leaf dimensions 60, 70 or 80 closing trim for double door hook lock with side handles (for sliding doors) handle with escutcheon all mat hardened panes in TOLEDO model mat hardened pane in SEVILLA model SEVILLA, full SEVILLA, glazed 47

SIDE PANELS PORTA recommends We have prepared an additional range of attachments to complement the range of MADRID, CORDOBA, TOLEDO, SEVILLA leaves. We would like to draw your attention to the fact that a few discolorations of veneer and differences in wood grain are inherent in this group of products and prove their natural origin and the charm of true wood. 48 pattern A pattern B pattern K pattern C pattern D pattern E pattern F pattern G

Standard natural veneer Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 1 2 3 4 5 Pine 1 Pine 2 Pine 3 Pine 4 CONSTRUCTION SIDE PANELS The side panel consists of a frame made of high quality wood, plywood and chipboard. Door leaf panel and frame are faced with one of four high quality natural veneers. External rail fi nished with veneer in the door leaf colour. The technology used gives a side panel highly resistant to deformations. FINISHING The door leaf is painted with ecologically safe water varnish and hardened using UV (light) technology. MODELS Eleven patterns: A K. ACCESSORIES included in the side panel price pane (pattern chinchilla ) pane fi xing seal SIDE PANEL SIZES 40 NOTES: The recommended natural veneer door frames come equipped with a set of two Porta pintle hinges. Side panel is not equipped with the hinge part. Side panels available in an unpainted version as well, for self-fi nishing. Door leaves cross sections multilayer structure Additional charges (option) drill for third hinge every hardened mat pane in patterns B, C, D, E, F, G, K hardened mat pane (pattern I) pattern H pattern I pattern J 49

Nova NATURE Design inspired by the application of Module RETRO - details, see page 118-119. PORTA recommends Nova NATURE range features modern and original designs combined with natural veneers, which guarantee grainwood and colour replicability throughout the whole leaf surface. 50 pattern 1.1 pattern 1.2 pattern 1.3 pattern 2.1 pattern 2.2 pattern 3.1

Select natural veneer White Teak American Walnut Glass appliques Cherry Rosewood Wenge Ebony pattern A pattern B pattern C DOOR LEAF CONSTRUCTION Leaf frame is made from coniferous tree dressing. Leaf fi lling consists of perforated chipboard reinforced with an inside plywood rail. The frame, along with the fi lling is covered on both sides with a board plated with high quality natural veneer. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Door leaf is covered with select natural veneer, quality of which guarantees repeatability of each pattern and uniform of dyeing process. MDF frame is veneered in the colour of the door leaf. MODELS Single-or double-leaf in all patterns of each group. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the doorleaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert hardened pane patterns: mat wave or squares preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 Double leaf: 120 180 1 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame pattern D pattern E pattern F Door leaves cross sections NOTES: The recommended natural veneer door frames come equipped with a set of three Porta pintle hinges. Door leaf is not equipped with the hinge part. Ventilation sleeves available in silver or golden colour 1 or 2 rows. (1 group only). 1 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation sleeves, ventilation undercut bull s eye made from stainless steel (pattern 1.1 only) hook lock with side handles (for sliding doors) glass appliques (1 pc) handle with escutcheon pattern 3.2 51

Nova NATURE PORTA recommends Nova NATURE range features modern and original designs combined with natural veneers, which guarantee grainwood and colour replicability throughout the whole leaf surface. 52 pattern 4.1 pattern 4.2 pattern 4.3 pattern 4.4 pattern 5.1 pattern 5.2

Select natural veneer White Teak American Walnut Glass appliques Cherry Rosewood Wenge Ebony pattern A pattern B pattern C DOOR LEAF CONSTRUCTION Leaf frame is made from coniferous tree dressing. Leaf fi lling consists of perforated chipboard reinforced with an inside plywood rail. The frame, along with the fi lling is covered on both sides with a board plated with high quality natural veneer. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Door leaf is covered with select natural veneer, quality of which guarantees repeatability of each pattern and uniform of dyeing process. MDF frame is veneered in the colour of the door leaf. MODELS Single-or double-leaf in all patterns of each group. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert hardened pane patterns: mat wave or squares preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 Double leaf: 120 180 1 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame pattern D pattern E pattern F Door leaves cross sections NOTES: The recommended natural veneer door frames come equipped with a set of three Porta pintle hinges. Door leaf is not equipped with the hinge part. Ventilation sleeves available in silver or golden colour 1 row. 1 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation sleeves, ventilation undercut hook lock with side handles (for sliding doors) glass appliques (1 pc.) handle with escutcheon pattern 5.3 pattern 5.4 pattern 5.5 53

Nova NATURE PORTA recommends Nova NATURE range features modern and original designs combined with natural veneers, which guarantee grainwood and colour replicability throughout the whole leaf surface. 54 pattern 6.1 pattern 6.2 pattern 6.3 pattern 7.1 pattern 7.2 pattern 7.3

Select natural veneer White Teak American Walnut Glass appliques Cherry Rosewood Wenge Ebony pattern A pattern B pattern C DOOR LEAF CONSTRUCTION Leaf frame is made from coniferous tree dressing. Leaf fi lling consists of perforated chipboard reinforced with an inside plywood rail. The frame, along with the fi lling is covered on both sides with a board plated with high quality natural veneer. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Door leaf is covered with select natural veneer, quality of which guarantees repeatability of each pattern and uniform of dyeing process. MDF frame is veneered in the colour of the door leaf. MODELS Single-or double-leaf in all patterns of each group. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert hardened pane patterns: mat, wave or squares preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf: 60, 70, 80, 90, 100 Double leaf: 120 180 1 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame pattern D pattern E pattern F Door leaves cross sections NOTES: The recommended natural veneer door frames come equipped with a set of three Porta pintle hinges. Door leaf is not equipped with the hinge part. Ventilation sleeves available in silver or golden colour 1 or 2 rows. 1 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation sleeves, ventilation undercut bull s eye made from stainless steel (patterns 6.1; 7.1 only) hook lock with side handles (for sliding doors) glass appliques (1 pc) handle with escutcheon 55

Nature LINE PORTA recommends novelty The Nature LINE design is tied to the highly popular Porta LINE range. Aluminum marquetry, combined with natural, select type veneer create an interesting combination corresponding to contemporary trends in interior decoration. 56 pattern A.1 pattern A.3 pattern B.1 pattern C.2 pattern D.2 pattern E.2

Select natural veneer White Teak American Walnut Cherry Rosewood Wenge Ebony DOOR LEAF CONSTRUCTION The leaf frame is made of coniferous timber dressing, while the perforated chipboard core is reinforced with an internal plywood frame. The frame, along with the core, is covered, on both sides, with high quality natural veneer. The leaves come equipped with 6 mm thick aluminum marquetry (silver or golden). LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Door leaf is covered with select natural veneer, quality of which guarantees repeatability of each pattern and uniform of dyeing process. MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf 60, 70, 80, 90 ; 100 Double leaf 120 200 1 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame NOTES: The recommended natural veneer door frames come equipped with a set of three Porta pintle hinges. Door leaf is not equipped with the hinge part. Ventilation sleeves available in silver or golden colour 1 or 2 rows, not available in D.2. pattern. Door leaves cross sections 1 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation sleeves, ventilation undercut bull s eye made from stainless steel (not available in pattern E.2) hook lock with side handles (for sliding doors) handle with escutcheon 57

Nature TREND PORTA recommends novelty Nature TREND is an effective combination of a mat glass and panels covered with the natural, select type veneer with aluminum inserts. It is an interesting proposal for those who value modern solutions defi ning the character of the interior they live and work in. 58 pattern A.0 pattern A.1 pattern A.2 pattern A.3

Select natural veneer White Teak American Walnut Cherry Rosewood Wenge Ebony DOOR LEAF CONSTRUCTION The frame-structure leaves are made of vertical and horizontal elements from high quality coniferous timber, plywood and perforated chipboard. Depending on the model, the leaf frame is fi lled with the suitable format MDF board with a natural veneer. 6 mm aluminum marquetry (silver or golden) and a hardened, mat glass complete the product. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Door leaf is covered with select natural veneer, quality of which guarantees repeatability of each pattern and uniform of dyeing process. MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert hardened mat pane preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf 60, 70, 80, 90 ; 100 Double leaf 120 200 1 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame NOTES: The recommended natural veneer door frames come equipped with a set of three Porta pintle hinges. Door leaf is not equipped with the hinge part. Ventilation sleeves available in silver or golden colour 1 row. Door leaves cross sections 1 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation sleeves, ventilation undercut hook lock with side handles (for sliding doors) handle with escutcheon 59

Nature STYLE PORTA recommends This line of products draws on the highly esteemed Porta STYLE collection. The natural veneer used in combination with intriguing designs create a choice for people in search of exceptional decorating solutions where the prestige is underlined by the finishing materials they utilise. 60 pattern 1 pattern 2 pattern 3 pattern 4 pattern 5

Select natural veneer White Teak American Walnut Cherry Rosewood Wenge Ebony DOOR LEAF CONSTRUCTION Leaf frame is made from coniferous tree dressing. Leaf fi lling consists of perforated chipboard reinforced with an inside plywood rail. The frame, along with the fi lling is covered on both sides with a board plated with high quality natural veneer. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Door leaf is covered with select natural veneer, quality of which guarantees repeatability of each pattern and uniform of dyeing process. MDF frame is veneered in the colour of the door leaf. MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert hardened mat pane preparation for shortening up to 60 mm round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf 60, 70, 80, 90, 100 Double leaf 120 200 1 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Door frame in natural veneer, fi xed width: 100mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Door leaves cross sections NOTES: The recommended natural veneer door frames come equipped with a set of Porta pintle hinges. Door leaf is not equipped with the hinge part. Ventilation sleeves available in silver or golden colour 1 or 2 rows, not available in 5 pattern. 1 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation sleeves, ventilation undercut hook lock with side handles (for sliding doors) handle with escutcheon 61

Nature SPACE PORTA recommends Nature SPACE answers the need for designing modern interiors, where a significiant role is played by light and space. We recommend these models at clients who wish to make their homes stand out with exceptionally attractive and modern styles of interior arrangement. 62 pattern 1 pattern 2 pattern 3 pattern 4 pattern 5

Select natural veneer White Teak American Walnut Cherry Rosewood Wenge Ebony DOOR LEAF CONSTRUCTION Leaf frame is built from vertical stiles made of high quality coniferous lumber, plywood and solid chipboard, joined with a tempered frosted glass pane 8 mm thick. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Door leaf is covered with select natural veneer, quality of which guarantees repeatability of each pattern and uniform of dyeing process. MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with c-section metal rail on the leaf for guiding (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert hardened mat pane (width is dependent on leaf size) LEAF SIZES (page 138, table 1) Single leaf 60, 70, 80, 90 ; 100 1 Double leaf 120 200 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame NOTES: The recommended natural veneer door frames come equipped with a set of three Porta pintle hinges. Door leaf is not equipped with the hinge part. 1 Arbitrary selection of door leaf sizes for double doors. Door leaves cross sections perforated chipboard Additional charges (option) 100 size handle with escutcheon 63

Nature CONCEPT PORTA recommends Design inspired by the application of Module RETRO - details, see page 118-119. novelty Nature CONCEPT is a door collection aimed at clients, for whom doors, beside the functionality associated with them, also constitute an important decorative element. Natural veneers applied, fit in ideally wherever aesthetics play a leading role, build the proper ambience, and exceptional climate that often determines our well being. 64 pattern A.0 pattern A.3 pattern A.9 pattern B.1 pattern C.0 pattern C.2 pattern C.6

Select natural veneer White Teak American Walnut Cherry Rosewood Wenge Ebony DOOR LEAF CONSTRUCTION The frame-structure leaves are made of vertical and horizontal elements from high quality coniferous timber, plywood and perforated chipboard. Depending on the model, the leafs are made of HDF boards covered with a natural veneer, as well as of relief board 1 and tempered glass. LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Door leaf is covered with select natural veneer, quality of which guarantees repeatability of each pattern and uniform of dyeing process. MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert hardened mat pane preparation for shortening up to 60 mm round fl ush handle (for sliding doors). LEAF SIZES (page 138, table 1) Single leaf 60, 70, 80, 90 ; 100 Double leaf 120 200 2 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Structure of relief board NOTES: The recommended natural veneer door frames come equipped with a set of three Porta pintle hinges. Door leaf is not equipped with the hinge part. Ventilation sleeves available in silver or golden colour 1 row. Door leaves cross sections 1 The relief board color may be chosen from the select veneer color sample range and has to be specifi ed while ordering. 2 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation sleeves, ventilation undercut hook lock with side handles (for sliding doors) handle with escutcheon pattern K.0 pattern K.1 pattern K.3 65

Nature CONCEPT PORTA recommends Nature CONCEPT is a door collection aimed at clients, for whom doors, beside the functionality associated with them, also constitute an important decorative element. Natural veneers applied, fit in ideally wherever aesthetics play a leading role, build the proper ambience, and exceptional climate that often determines our well being. 66 pattern D.0 pattern D.1 pattern E.0 pattern E.1 pattern F.0 pattern F.1

Select natural veneer White Teak American Walnut Cherry Rosewood Wenge Ebony DOOR LEAF CONSTRUCTION The leaf frame is made of coniferous timber dressing. The core is made of perforated chipboard reinforced with an internal plywood frame. The frame, along with the core, are covered, on both sides, with a high quality natural veneer. Depending on the model, the leaves may be equipped with a relief board 1 or tempered glass (glazing fi xture). LEAF EDGE PROFILE K type door leaf edge profi le. Outside leaf rail veneered to match leaf color. FINISHING Door leaf is covered with select natural veneer, quality of which guarantees repeatability of each pattern and uniform of dyeing process. MODELS Single-or double-leaf in all patterns. Door leaf is available in version for single sliding door without hinges and rebate and with a groove for guiding element slot-milled in the bottom edge of the door leaf (included in the system). Patterns D1, E1, F1 have an additional c-section metal rail on the leaf for guiding. ACCESSORIES included in the leaf price lock: for regular key, bathroom lock or for cylinder insert hardened mat pane preparation for shortening up to 60 mm (applies to patterns D.0, E.0, F.0 only) round fl ush handle (for sliding doors) LEAF SIZES (page 138, table 1) Single leaf 60, 70, 80, 90 ; 100 Double leaf 120 200 2 RECOMMENDED DOOR FRAMES triple-hinged (from page 116) Door frame in natural veneer, fi xed width: 100 mm Adjustable Porta SYSTEM door frame Adjustable PRESTIGE door frame Structure of relief board Door leaves cross sections NOTES: The recommended natural veneer door frames come equipped with a set of three Porta pintle hinges. Door leaf is not equipped with the hinge part. Ventilation sleeves available in silver or golden colour 1 row. Ventilation undercut availables in patterns D.0, E.0 F.0 only. 1 The relief board color may be chosen from the select veneer color sample range and has to be specifi ed while ordering. 2 Arbitrary selection of door leaf sizes for double doors. perforated chipboard Additional charges (option) 100 size ventilation sleeves, ventilation undercut hook lock with side handles (for sliding doors) handle with escutcheon 67

SLIDING DOOR systems FOLDING doors, SLIDING doors PORTA doors that does not mean traditional side-hung doors only. In their concepts the designers often seek atypical solutions matching the function and purpose of the rooms. At the same time they strive to ensure consistent selection of materials used for manufacture of particular designed interior furniture elements. Any sliding or folding systems ideally fit where side-hung doors cannot be installed because of limited space or the interior concept plan. Wishing to meet the customers expectations, PORTA offers all these system solutions in a wide colour range of available coatings. PORTA sliding door system ALU sliding door system COMPACT sliding door system ALPHA folding doors new collection! BETA folding doors new collection! OMEGA double-leaf sliding doors new collection! Enjoy the quality!

PORTA sliding door system wall system for sliding doors (without a door leaf) PORTA recommends There are places where the side-hung doors cannot be used because of reduced area or the concept of interior plan. In such situations we offer a system of sliding doors based on Porta SYSTEM door frame (all colours available) including the sliding system, shield and fender beam. A complete wall-mounted set should include: wall system tunnel type door frame sliding type door leaf. ALU sliding door system wall system for sliding doors (without a door leaf) PORTA recommends 70 ALU SYSTEM is another offer of sliding system, characterized by high workmanship esthetics. It is a perfect solution for modern interiors. Suspension made of aluminum gives this system an impression of modernity and structure lightness. A complete wall-mounted set should include: wall system tunnel type door frame sliding type door leaf.

Minimax veneer White Beech Apple tree Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 PVC veneer Light beech Alder Apple tree Golden Walnut CONSTRUCTION The system contains a rail with trolleys, shields and fender beam. The shield and fender beam are made of chipboard and MDF. All visible elements are veneered in the same colours range as Porta SYSTEM door frame. FINISHING The following veneers are used: Minimax, Portadecor, Portadur, PVC, HQ CPL and natural veneers. The veneer colours match the standard door leaf colours offered by Porta KMI Poland. ACCESSORIES included in the set price rail with trolleys striker brush self-stick seal fl oor-mounted component, guiding and stabilizing door leaf in vertical direction SET SIZES (page 141, table 6) Single door. To the following leaf width: 60, 70, 80, 90 100 NOTES: Set should be installed only after the interior works are fi nished (e.g. wall paper and parquet are in place). Set is available as universal design. The direction can be changed through the beam turn to the left or right side of the tunnel Porta SYSTEM. Porta SYSTEM in version tunnel means door frame without hinges and lock fastening, and without proper holes. HQ CPL veneer White Grey Euroinvest Beech Porta Maple Mahogany Walnut Milano 1 Milano 2 Milano 3 Standard natural veneer Milano 4 Milano 5 1 2 3 4 5 Limba 1 Limba 2 Limba 3 Limba 4 Pine 1 Pine 2 Pine 3 Pine 4 Select natural veneer Maple 1 Sapelli 3 Sapelli 4 Teak Cherry Rosewood Wenge Ebony White American Walnut CONSTRUCTION Offered system consists of a guide and a section supporting the door leaf. Both components are made of aluminum. FINISHING Porta SYSTEM door frames in tunnel version are coated with the following veneers: Minimax, Portadecor, Portadur, PVC, HQ CPL and natural veneers. The veneer colours match the standard door leaf colours offered by Porta KMI Poland. ACCESSORIES included in the set price rail with trolleys door leaf support section fl oor-mounted component, guiding and stabilizing door leaf in vertical direction SET SIZES (page 141, table 6) Single door. To the passage diameter with the following width: 60, 70, 80, 90. Double doors. To the passage diameter with the following width:,,130,,,150,,,170 1 NOTES: Set should be installed only after the interior works are fi nished (e.g. wall paper and parquet are in place). Set can be used with any door leaf direction and protrusion. Porta SYSTEM in version tunnel means door frame without hinges and lock fastening, and without proper holes. 1 In order to select system for tunnel type door frame properly, select door leafs larger by a single size from the passage diameter, e.g.: for 70 > 80, for 80 > 90, for 150 >2 x 80 etc. 71

COMPACT sliding door system system for sliding doors (without a door leaf) for mounting in the wall PORTA recommends 72 Sliding door system designed to be installed in the wall is an elegant solution which ensures maximum fl oor space of the room. An invisible construction incorporated in the gypsum wall allows the doors to be installed wherever side-hung doors do not meet the interior design concept or simply cannot be fi tted. A complete set includes the following: construction casing door frame door leaf (in sliding version)

Minimax veneer White Beech Apple tree Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 PVC veneer Light beech Alder Apple tree Golden Walnut HQ CPL veneer CONSTRUCTION The system comprises a casing to be fi tted in the wall complete with wheel hangers, rails and door frame made of chipboard and MDF board clad with veneers in colours offered by Porta SYSTEM. FINISHING Door frames are coated with the following veneers: Minimax, Portadecor, Portadur, PVC, HQ CPL and natural veneers. The veneer colours match the standard door leaf colours offered by Porta KMI Poland. ACCESSORIES included in the set price construction casing rail with wheel hangers lock strike brush seal fl oor-mounted component, guiding and stabilizing door leaf in vertical direction door frame SET SIZES (page 141, table 6) Single doors: 60, 70, 80, 90, 100 Double doors: 120 200 NOTES: The system is designed for gypsum board walls 125 mm wide. Door frame and leaf should be installed only after the interior works are fi nished (e.g. wall paper and parquet are in place). White Grey Euroinvest Beech Porta Maple Mahogany Walnut Milano 1 Milano 2 Milano 3 Standard natural veneer Milano 4 Milano 5 1 2 3 4 5 Maple 1 Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 Pine 1 Pine 2 Pine 3 Pine 4 Select natural veneer Teak Cherry Rosewood Wenge Ebony White American Walnut Additional charges (option) synchronization door closure (in double doors) 73

ALPHA folding doors PORTA recommends novelty ALPHA rebated two-element asymmetrical door with a typical lock in the leaf and door frame strike. Folding doors represent a structural concept which perfectly fits in the small area spaces. The folding systems allow to reduce the area needed for correct door operation to a minimum. They are widely used in all kinds of recessed wardrobes and wherever communication difficulties may arise due to limited space. A complete set includes the following: leading system two-element leaf Porta SYSTEM door frame (modified) BETA folding doors PORTA recommends novelty 74 BETA traditional non-rebated two-element symmetrical lockless door. Folding doors represent a structural concept which perfectly fits in the small area spaces. The folding systems allow to reduce the area needed for correct door operation to a minimum. They are widely used in all kinds of recessed wardrobes and wherever communication difficulties may arise due to limited space. A complete set includes the following: leading system two-element leaf Porta SYSTEM door frame (modified)

Acrylic paint (interior) White (RAL9016) Water-based varnish (interior) Beech Apple tree Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 PVC veneer CONSTRUCTION The leaf core is made of stabilizing honeycomb or or perforated chipboard reinforced with inner frame made of plywood (option at an extra charge) 1. The frame and the core are covered with HDF board on both sides. LEAF EDGE PROFILE K" profile, both sides and top of the leaf are covered with skirting tape of the same colour. FINISHING The doors may be coated with ecologically safe new generation water-based varnish or veneers: Portadecor, Portadur (vertical design of wood grains), PVC, HQ CPL and natural veneers (vertical design of wood grains). MODELS Two-element, full. ACCESSORIES included in the set price leading mechanism brush (self-stick) seal three hidden hinges round handle (BETA) lock: regular key lock, bathroom lock or cylinder insert lock (ALPHA) lock strike (ALPHA) LEAF SIZES (page 141, table 6) Two-element leaf: 60, 70, 80, 90, 100 2 RECOMMENDED DOOR FRAMES Modifi ed Porta SYSTEM door frame B to K width range. Light beech Alder Apple tree Golden Walnut HQ CPL veneer 1 Perforated chipboard core is a standard in the natural veneered doors. 2 100 size is not available in BETA system. White Grey Euroinvest Beech Porta Maple Mahogany Walnut Milano 1 Milano 2 Milano 3 Standard natural veneer Milano 4 Milano 5 1 2 3 4 5 Maple 1 Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 Select natural veneer Teak Cherry Rosewood Wenge Ebony White American Walnut Door leaves cross sections honeycomb stabilizing Additional charges (option) 100 size core: perforated chipboard ventilation sleeves, ventilation undercut handle with escutcheon perforated chipboard 75

OMEGA double-leaf sliding doors novelty PORTA recommends OMEGA sliding door system is a solution for any recessed wardrobes and walk-in closets. Wide selection of veneer types and colours allows to adjust the product to any interior arrangement and to other doors offered by PORTA. A complete set includes the following: leading system two door leaves Porta SYSTEM door frame (modified version of tunnel type) 76

Acrylic paint (interior) White (RAL9016) Water-based varnish (interior) Beech Apple tree Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Portadur veneer CONSTRUCTION Stabilizing core with HDF panel on both sides. Leaf thickness: 30 mm. LEAF EDGE PROFILE K profi le, both edges and top of the leaf are covered with skirting tape of the same colour. FINISHING The doors may be coated with ecologically safe new generation water-based varnish or veneers: Portadecor, Portadur (vertical design of wood grain), PVC, HQ CPL and natural veneers (vertical design of wood grain). MODELS Double leaf, symmetrical, non-rebated, full. ACCESSORIES included in the set price leading mechanism round handle LEAF SIZES (page 141, table 6) Double leaf symmetrical: 120, 140, 160, 180, 200, 220. RECOMMENDED DOOR FRAMES (from page 116) Modifi ed Porta SYSTEM door frame of tunnel type A to K width range. Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 PVC veneer Light beech Alder Apple tree Golden Walnut HQ CPL veneer White Grey Euroinvest Beech Porta Maple Mahogany Walnut Milano 1 Milano 2 Milano 3 Standard natural veneer Milano 4 Milano 5 1 2 3 4 5 Maple 1 Limba 1 Limba 2 Limba 3 Limba 4 Select natural veneer Sapelli 3 Sapelli 4 Teak Cherry Rosewood Wenge Ebony White American Walnut Door leaves cross sections stabilizing core with HDF panel on both sides Additional charges (option) 100 and 110 sizes longitudinal metal side handles (pc.) 77

INTERIOR ENTRANCE doors Everyone needs a feeling of security particularly at home. Solid entrance doors, which protect our apartment against unbidden guests, are an important position in the Porta KMI Poland offer. We offer four types of entrance doors: AGATE, OPAL, QUARTZ and GRANITE. Technical parameters of each of the above mentioned door type differ, though, generally, they meet all specifi cations of the entrance doors. This has been confi rmed by the appropriate Technical Approvals as well as practical and carefree use of the hundred thousand of the fabricated doors of this type. An important feature of Porta entrance doors consists in that they are offered as a set comprising a leaf with an adjusted metal door frame complete with 2nd European norm ENV or C class furniture. AGATE OPAL QUARTZ GRANITE Enjoy the quality!

AGATE Plus, OPAL Plus PORTA recommends The use of sheet aluminium for door construction has allowed an exceptional resistance of AGATE and OPAL doors for adverse impact of specific service conditions specific for the staircase such as temperature and humidity fluctuations. OPAL doors are characterized by acoustic insulation 33 db and 2nd class burglary protection properties according to the European ENV standard provided that they are installed in a special PORTA metal frame, with a stainless steel threshold, 2nd ENV class handle with escutcheon and a patented lock cylinder of at least 4th ENV class. 80 flat pattern 2 pattern 3 pattern 4 pattern 6 pattern 7 pattern 8 pattern 9

HQ CPL veneer (flat) DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood frame fi lled with reinforced perforated chipboard, and covered from both sides with composite boards of aluminium and HDF. White Grey Euroinvest Beech Porta Mahogany Maple Walnut LEAF EDGE PROFILE Both side edges and higher part are covered with skirting tape in the color of the door leaf. The leaf itself is made in the rebate version. Milano 1 Milano 2 Milano 3 Milano 4 PVC veneer (flat and slot-milled) Milano 5 FINISHING The leaf is veneered with HQ CPL laminate 0.2 or 0.7 mm thick, natural veneer (fl ush door leaves only) or PVC veneer (fl ush and slot-milled). MODELS Single leaf: fl ush and slot-milled. Light beech Alder Apple tree Golden Walnut White wood grains Standard natural veneer (flat) 1 2 3 4 5 Maple 1 ACCESSORIES included in the leaf price (AGATE Plus) one or two locks with rectangular dead bolt for cylinder inserts three pintle hinges eye-viewer in silver colour threshold made of stainless steel door frame ACCESSORIES included in the leaf price (OPAL Plus) 4-point lock for 2 cylinder inserts three pintle hinges three anti-lever security bolts silver eye-viewer stainless steel threshold door frame Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 Select natural veneer (flat with vertical wood grains) White Teak American Walnut Cherry Rosewood Wenge Ebony LEAF SIZES (page 139, table 3) 80, 90 100 RECOMMENDED DOOR FRAME (page 128) Angle-bar metal door frame is made of profi le 100 mm wide and made of steel. Coated on both sides with 1.2 mm (AGATE) or 1.5 mm (OPAL) thick zinc layer. Is equipped with: 3 pintle hinges, circumferential rubber gasket, six assembly dowels (OPAL only). The frame is covered with powder paint in one out of standard colours: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028). Door frame is available in two versions: for setting in the ready fl oor level 0 for cementing in the fl oor level 30 PROJECT door frame (page 130) NOTES: Preparation for shortening (by 60 mm max.) Acoustic insulation class Rw = 32 db (range 32 36 db). Door leaves cross sections perforated chipboard + aluminium board Additional charges (option) 100 size cylinder inserts handle with escutcheon, upper lock board installation dowels (AGATE door frame 6 pcs) the frame section from 80 to 100 mm expanding the frame section from 101 to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm free of charge 81

QUARTZ PORTA recommends The multi-layer construction of the QUARTZ door leaf ensures 30 minute fire resistance, smoke-tightness of Sa, Sm class and 34 db sound insulation. The sheet aluminium inserted in the leaf construction makes the door exceptionally resistant to adverse service conditions on the staircase. 82 flat pattern 2 pattern 3 pattern 4 pattern 6 pattern 7 pattern 8 pattern 9

HQ CPL veneer (flat) DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood frame fi lled with multilayer fi re resistant chipboard core and covered from both sides with composite boards of aluminium and HDF. White Grey Euroinvest Beech Porta Mahogany Maple Walnut LEAF EDGE PROFILE Both side edges and higher part are covered with skirting tape in the color of the door leaf. The leaf itself is made in the rebate version. Milano 1 Milano 2 Milano 3 PVC veneer (flat and slot-milled) Light beech Alder Apple tree Golden Walnut White wood grains Standard natural veneer (flat) Milano 4 Milano 5 1 2 3 4 5 Maple 1 FINISHING The leaf is veneered with HQ CPL laminate 0.7 mm thick, natural veneer (fl at door leaves only) or PVC veneer (fl at and slot-milled). MODELS Single leaf: fl at and slot-milled. Three types (type I; II and III), depending on the complexity of the lock structure. ACCESSORIES included in the leaf price rectangular bolt lock for a patented cylinder (QUARTZ type I) two mortise locks with rectangular bolts, for a patented cylinder (QUARTZ type II) 4-point mortise lock for two patented cylinders and three anti-leverage security bolts (QUARTZ type III) three reinforced, silver pintle hinges wide-angle, silver eye-viewer (optional) thermo-swelling seal in the leaf grove door frame with a standard, stainless steel threshold (90 mm) LEAF SIZES (page 139, table 3) 80, 90, 100 Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 Select natural veneer (flat with vertical wood grains) White Teak American Walnut Cherry Rosewood Wenge Ebony DOOR FRAME (page 128) Angle-bar metal door frame is made of profi le 100 mm wide. Is made of steel, coated on both sides with 1.5 mm thick zinc layer. The frame is covered with powder paint in one out of standard colours: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028). It is equipped with: 3 pintle hinges standard, circumferential thermoswelling seal, threshold made of stainless steel (90 mm) and a bracket for the automatic closing mechanism. Moreover the frame is provided with: QUARTZ I striker for one lock; QUARTZ II striker for two locks; QUARTZ III striker for four point strip lock, 6 dowels and holes for anti-unhinging bolts. Door frame is available in two versions: for setting in the ready fl oor level 0 for cementing in the fl oor level -30 PROJECT door frame (page 130) NOTES: Preparation for shortening (by 60 mm max.). To meet the Technical Approval requirements, QUARTZ doors need to be equipped with a self-closing device. Acoustic insulation class Rw = 32 db (range 32 36 db). Additional charges (option) Door leaves cross sections fire-resistant perforated chipboard + aluminium board 100 size cylinder inserts handle with escutcheon, upper lock board the frame section from 80 to 100 mm expanding the frame section from 101 to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm free of charge 83

GRANITE PORTA recommends We offer two types of Granite doors: type I with burglary resistance class C and 3rd ENV class of Acoustic Insulation Rw = 36 db guarantees safety and protection against noise. type II has additional fire resistance of 30 min (EI 30) and smoke-tightness of S 60 this is an additional guarantee of protection against the fire effects, particularly against asphyxiation. 84 flat pattern 2 pattern 3 pattern 4 pattern 6 pattern 7 pattern 8 pattern 9

HQ CPL veneer (flat) DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood frame fi lled with special construction Porta with inner steel bars, covered from both sides with composite boards of aluminium and HDF. White Grey Euroinvest Beech Porta Mahogany Maple Walnut LEAF EDGE PROFILE Outside leaf rail veneered to match leaf color. The leaf itself is made in the rebate version. Milano 1 Milano 2 Milano 3 Milano 4 PVC veneer (flat and slot-milled) Milano 5 FINISHING The leaf is veneered with HQ CPL laminate 0.7 mm thick, natural veneer (fl ush door leaves only) or PVC veneer (fl ush and slot-milled). MODELS Single leaf: fl ush and slot-milled. Light beech Alder Apple tree Golden Walnut White wood grains Standard natural veneer (flat) 1 2 3 4 5 Maple 1 ACCESSORIES included in the leaf price multi-bolt mortise lock two anti-burglary C -class cylinders handle with anti-burglary escutcheon upper escutcheon three reinforced, silver pintle hinges four anti-leverage security bolts silver eye-viewer (optional) the lock, cylinder and escutcheon used are C -class certifi ed the leaf may be shortened by 60 mm maximum additionally: type II thermo-swelling seal on side and upper edges (except for the lower edge) door frame is equipped with a wider type of a stainless steel threshold (120 mm). Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 LEAF SIZES (page 139, table 3) 80, 90, 100 Select natural veneer (flat with vertical wood grains) White Teak American Walnut Cherry Rosewood Wenge Ebony DOOR FRAME Angle-bar metal door frame is made of profi le 100 mm wide. Is made of steel, coated on both sides with 1.5 mm thick zinc layer and equipped with: fi re-proof gasket, 8 dowels, threshold made of stainless steel (120 mm). The frame is covered with powder paint in one out of standard colours: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028). Door frame is available in two versions: for setting in the ready fl oor level 0 for cementing in the fl oor level -30. PROJECT door frame (page 130) NOTES: To meet the Technical Approval requirements, 30-minute fi re retardant doors need to be equipped with a self-closing device. Acoustic insulation class Rw = 32 db (range 32 36 db) Door leaves cross sections perforated chipboard + steel bars + aluminium board Additional charges (option) 100 size the frame section from 80 to 100 mm expanding the frame section from 101 to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm free of charge 85

EXTERIOR doors The offer of internal doors and interior entrance doors is supplemented with our exterior door range. The exterior doors may be installed outside the building and are resistant to weather conditions. However, long-term and carefree operation of the external doors is strongly affected by their proper installation, i.e. in compliance with the location and assembly instruction. The assembly method which eliminates the exposure of the doors to rainfall and sun is of extreme importance. Therefore, an appropriate protection in the form of a canopy roof over the door is important to considerably extend the carefree service of the door. We offer three groups of external doors: doors made of metal sheet drawpieces (Gdansk, Szczecin, TORUN and ROMA Premium models) and wooden frame doors (GDYNIA, WROCLAW model). It should be emphasized that we offer all types of external doors with glazing, and in the case of GDYNIA doors we offer a wide range of sidelights and toplights. GDANSK SZCZECIN TORUN ROMA new collection! WROCLAW GDYNIA Transoms for GDYNIA Enjoy the quality!

GDANSK, TORUN, SZCZECIN PORTA recommends Thermal insulation and resistant to atmospheric conditions as well as affordable price are the assets of the GDANSK, SZCZECIN and TORUN. The vinyl veneer with woodgrain pattern is characteristic for these doors. 88 GDANSK, full GDANSK, glazed GDANSK, full GDANSK, glazed SZCZECIN, glazed TORUN, full

Acrylic paint (exterior) White (RAL 9016) Brown (RAL 8028) wood grain surface structure DOOR LEAF CONSTRUCTION The door leaf frame is made of bond coniferous wood with heat insulation fi lling. The frame is lined on both sides with galvanized sheet drawpiece, 0.6 mm thick. A four-feather seal is fi tted in the bottom rail of the door leaf. LEAF EDGE PROFILE Leaf rail is protected by paint in the color of the door leaf. The leaf itself is made in the non-rebate version. FINISHING The leaf is covered with vinyl ( wood grain pattern). MODELS Single doors full: GDANSK, TORUN Single doors glazed: GDANSK, SZCZECIN The glazed models are fi tted with safety refl ex tinted glass (GDANSK) and transparent glass (SZCZECIN). ACCESSORIES included in the leaf price two locks lower (spacing 72 mm) and upper. Regular patented cylinders or cylinders characterized by higher technical parameters may be used for both locks three hinges with anti-leverage security bolts door frame with a metal threshold LEAF SIZES (page 140, table 4) GDANSK 80, 90 TORUN, SZCZECIN 90 DOOR FRAME Angle-bar frame made of a steel sheet 1.5 mm thick, delivered complete with an aluminum threshold. Powder painted with priming paint in door leaf s colour (white RAL 9016 or brown RAL 8028). Fitted with six assembly dowels, special magnetic seals (the side and upper part), increasing the leaf insulating effi ciency. Door frame profi le width 150 mm. Door frame is available in two versions: for setting in the ready fl oor level 0 for cementing in the fl oor level -30. Door leaves cross sections NOTES: Heat loss index values: for solid door leaf U = 2,05 W/m 2 K for glass ported door leaf U = 2,11 W/m 2 K For exterior doors overhead canopy is recommended. In the case of the doors which open outwards, the canopy roof is obligatory. thermal insulation A (U = 2,05 W/m 2 K) Additional charges (option) cylinder inserts eye-viewer in silver colour handle with escutcheon, upper lock board 89

ROMA metal doors PORTA recommends novelty ROMA steel doors are manufactured in two versions: STANDARD version is used in particular for fl at entrance doors in apartment buildings. The doors consist of a leaf fi lled with thermally insulating material and metal door frame made of zinc-coated steel sheet. PREMIUM version is used in particular for entrance doors in single family houses. The door leaf is fi lled with a stiff thermally insulating core which prevents frost penetration. Metal and wood door frame prevents against thermal bridges. In both versions the door leaf casing and the frame are made of zinc-coated steel sheet coated with decorative PVC laminate to meet the aesthetical requirements of the most demanding customers and to guarantee long-term use of the doors. 90 single doors double doors

PVC laminated steel sheet Golden Walnut Mahogany wood grain structure surface DOOR LEAF CONSTRUCTION The frame is fi lled with 45 mm thick thermally insulating material (STANDARD version), or with 50 mm thick thermally insulating material and additionally clad with 3 mm thick HDF board (PREMIUM version). The frame is clad with zinc-coated steel sheet 0.6 mm thick and coated with wood-like PVC laminate. LEAF EDGE PROFILE The door leaf is rebated and its thickness depends on the version. FINISHING The door leaf is veneered with wood-like PVC laminate ( wood grain ). MODELS Single and double leaves, fl at, solid. ACCESSORIES included in the leaf price two independent, multipoint locks adopted for two cylinder inserts three silvery reinforced pintle hinges four anti-leverage security bolts PREMIUM version three anti-leverage security bolts STANDARD version PVC veneered folded metal door frame LEAF SIZES (page 140, table 4) Single leaf: 80, 90, 100. Double leaf: 130 200 1 DOOR FRAME STANDARD version zinc-coated steel sheet 1.5 mm thick coated with woodlike PVC laminate. Door frame profi le width 80 mm. PREMIUM version metal and wooden door frame composed of fi nger jointed softwood and zinc-coated steel sheet 1.5 mm thick coated with wood-like PVC laminate. Door frame profi le width 80 mm. The door frames are manufactured and delivered as elements packed in a carton box for assembly on do-it-yourself basis. NOTES: We recommend to use a canopy roof for the exterior doors. In the case of the doors which open outwards, the canopy roof is obligatory. 1 The minimum size for active leaf is 90. Available door frame profiles STANDARD version PREMIUM version Door leaves cross sections STANDARD thermally insulated version PREMIUM thermally insulated version Additional charges (option) cylinder inserts eye-viewer in silver colour handle with escutcheon, upper lock board stainless steel threshold 91

WROCLAW PORTA recommends High quality of materials combined with tried and tested door manufacturing technology of WROCLAW doors guarantee durable construction, as well as high quality of finish. Two independent, multi-bolt C class locks, anti-leverage security bolts and safety glass with reflective coating ensures the feelings of security for all the family. 92 pattern 1 pattern 2 pattern 3 pattern 4 pattern 5

Exterior water-based varnish 1 2 3 4 5 (Golden) 6 (White) DOOR LEAF CONSTRUCTION Leaf frame is made from oak tree dressing. Leaf fi lling consists of hollow core particle board reinforced with an inside plywood rail. A smooth or decoratively engraved thermal insulation panel is set in the leaf frame. In lower part of the leaf of an inside opening door there is a wooden eaves strip installed. LEAF EDGE PROFILE Outside leaf rail is in leaf colour. Double rebate on three edges: two vertical and one upper horizontal. FINISHING Door surface is protected with environmentally friendly water based exterior varnish. MODELS Single leaf smooth or solid slot-milled and glass ported. ACCESSORIES included in the leaf price two independent, multi-bolt locks for two patented cylinders adjustable hook three hinges adjustable in three dimensions with the use of the included Allen key anti-leverage security bolts circumferential sponge seal around the leaf threshold seal metal or wooden threshold glazed models come equipped with safe, tinted refl ex glass drip cap (with doors opening inwards) door frame LEAF SIZES (page 140, table 4) Single leaf: 90, 100 DOOR FRAME Door frame is made from triple layer pine wood. Door frame profi le: (93 x 70 mm). Two multi-bolt locks Adjustable hook Door leaves cross sections NOTES: European norm PN-EN 14351-1:2006. The CE marking. Heat loss index values: for solid door leaf U = 1,7 W/m2 K, for glass ported door leaf U = 2,0 W/m2 K For exterior doors overhead canopy is recommended. In the case of the doors which open outwards, the canopy roof is obligatory. thermal insulation B (U = 1,7 W/m 2 K) Additional charges (option) cylinder inserts hinge covers (set on one pc) handle with escutcheon, upper lock board 93

GDYNIA PORTA recommends Innovative construction and rich design derived from the modernistic style specific for villas, residences and tenements are characteristic for GDYNIA doors. Two independent, multi-bolt C class locks, anti-leverage security bolts and safety glass with reflective coating ensures the feelings of security for all the family. 94 pattern 1 pattern 1MS pattern 1DS pattern 2S pattern 3 pattern 4

Exterior water-based varnish 1 2 3 4 5 (Golden) Pine 1 Pine 2 Pine 3 Pine 4 Pine 5 (Golden) 6 (White) DOOR LEAF CONSTRUCTION The door leaf consist of a multi-layer fi nger jointed wood frame fi lled with slot-milled panel with thermo-insulating core. In the bottom part of doors, which are opened inwards, there is installed a wooden drip. LEAF EDGE PROFILE Outside leaf rail is in leaf colour. Double rebate on three edges: two vertical and one upper horizontal. FINISHING The door surface is protected with ecologically safe water-based varnish for outdoor use. MODELS Single leaf: full or glazed. Single leaf with side transom (unilateral or bipartite) and upper transom. ACCESSORIES included in the leaf price two independent, multi-bolt locks for two patented cylinders adjustable hook three hinges adjustable in three dimensions with the use of the included Allen key anti-leverage security bolts circumferential sponge seal around the leaf threshold seal metal or wooden threshold glazed models come equipped with safe, tinted refl ex glass drip cap (with doors opening inwards) door frame LEAF SIZES (page 140, table 4) Single leaf: 90, 100 DOOR FRAME Door frame is made of multi-layer or Pinewood with solid wooden lining. Door frame profi le: 93 x 70 mm. Two multi-bolt locks Adjustable hook Door leaves cross sections NOTES: European norm PN-EN 14351-1:2006. The CE marking. Heat loss index values: for solid door leaf U = 1,7 W/m2 K, for glass ported door leaf U = 2,0 W/m2 K In the case of the doors which open outwards, the canopy roof is obligatory. For exterior doors overhead canopy is recommended. thermal insulation C (U = 1,7 W/m 2 K) Additional charges (option) cylinder inserts hinge covers (set on one pc) handle with escutcheon, upper lock board pattern 5S pattern 6S 95

TRANSOMS for GDYNIA PORTA recommends Door glazing and borrow light glazing perform an important function in house lighting. They supplement the GDYNIA exterior door range. Discretion and privacy are ensured by dimmed safety glass with reflective coating and the veneer with wood grain pattern improves the aesthetics of any area. 96 Upper transom no. 1, 2, 3 pattern 1 pattern 1S pattern 2 pattern 2S

Exterior water-based varnish 1 2 3 4 5 (Golden) Pine 1 Pine 2 Pine 3 Pine 4 Pine 5 (Golden) 6 (White) CONSTRUCTION The door leaf consist of a multi-layer fi nger jointed wood frame fi lled with slotmilled panel with thermo-insulating core. In the bottom part of doors, which are opened inwards, there is installed a wooden drip. FINISHING The transom surface is protected with ecologically safe water-based varnish for outdoor use. MODELS side transoms upper transoms MODELS GDYNIA: side transoms no. 1 and no. 2, full and glazed no. 1 for single doors 90 and 100 no. 2 for doors with a single side transom 90 + 30 and 100 + 30 no. 3 for doors with two side transoms 30 + 90 + 30 and 30 + 100 + 30 DIMENSIONS (page 140, table 4) Side transoms width: 30. Upper rectangular transoms height 30. NOTES: European norm PN-EN 14351-1:2006. The CE marking. Door leaves cross sections thermal insulation C with transom (U = 2,3 W/m 2 K) 97

TECHNICAL AND METAL doors he number of buildings in which the T designers use improved parameters doors is growing. In order to meet the demands of the investment market and Building Code requirements PORTA KMI Poland extended its range with technical doors and has become a producer of complete door sets including both the interior doors and dedicated technical doors. The parameters of the PORTA technical doors have been measured and confi rmed by a number of tests carried out in dedicated laboratories. The range of technical doors includes the following: three types of 27 db, 32 db and 42 db noise reduction doors, two types of door with 30 and 60 minutes fire resistance, ENDURO doors with increased resistance, AQUA doors prepared to work in areas of high humidity, metal and acidproof sheet metal doors, metal doors with 30 minutes fi re resistant. As 42 db doors are additionally resistant to fire for 30 minutes and smokeproof, they have been appreciated by the investors dealing with construction of high standard hotels and office buildings. Rw = 27 db, Rw = 32 db Rw = 42 db EI 30, EI 60 ENDURO AQUA Metal doors new colors! Metal doors EI 30 Enjoy the quality!

Rw=27 db, Rw=32 db Non-typical project depicted in the photo (Porta CONTRACT). PORTA recommends For public buildings we offer sets of doors (door leaf and door frame) which belong to Rw=27 db or Rw=32 db acoustic class. Doors with diversified noise protection performance are appropriate for hotel rooms, offices, lecture halls, hospitals and other public buildings. 100 flat pattern 2 pattern 3 pattern 4 pattern 6 pattern 7 pattern 8 pattern 9

HQ CPL veneer (flat) DOOR LEAF CONSTRUCTION Rw = 27 db The door leaf consists of a fi nger jointed softwood or exotic sawn timber frame fi lled with reinforced perforated chipboard and covered from both sides with HDF boards. The door construction in ROENTGEN 1 version is complemented by a coat of lead which makes an anti-radiant barrier. White Grey Euroinvest Beech Porta Mahogany Maple Walnut DOOR LEAF CONSTRUCTION Rw = 32 db The door leaf consists of exotic sawn timber frame fi lled with reinforced multilayer chipboard and covered from both sides with HDF boards. Milano 1 Milano 2 Milano 3 Milano 4 PVC veneer (flat and slot-milled) Light beech Alder Apple tree Golden Milano 5 LEAF EDGE PROFILE Both side edges and higher part are covered with skirting tape in the color of the door leaf. The leaf itself is made in the rebate version. FINISHING Flush leaf: is veneered with HQ CPL laminate 0.2 mm thick (27 db only) or 0,7 mm, natural veneer or PVC veneer (fl at and slot-milled). Slot-milled leaf: PVC veneer. MODELS Single doors: full fl at or slot-milled. Walnut White wood grains Standard natural veneer (flat) 1 2 3 4 5 Maple 1 ACCESSORIES included in the leaf price three pintle hinges lock for cylinder insert automatic threshold seal in the leaf bottom edge seal in door frame door frame LEAF SIZES (page 139, table 3) 60 (fl at only), 70, 80, 90 and 100 Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 Select natural veneer (flat with vertical wood grains) Teak Cherry Rosewood Wenge Ebony RECOMMENDED DOOR FRAMES Adjustable Porta SYSTEM door frame (27 db) or adjustable reinforced Porta SYSTEM door frame (32 db) in leaf color, in accordance with the Porta SYSTEM color range. Angle-bar metal door frame of profi le 100 mm wide, made of both sides zinc-coated steel 1.5 mm thick. It is painted with power paint in one of standard colours: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028). Door frame is available in two versions: level 0 or -30. PROJECT door frame (page 130) White American Walnut Available profiles of door frames NOTES: Acoustic class Rw = 27 db (range 27 31 db) Acoustic class Rw = 32 db (range 32 36 db). Metal door frame (27 db, 32 db) 1 To meet the shield-door requirements, it is necessary to apply a layer of lead onto the door frame used for the ROENTGEN leaf. Flat leaves may be equipped with special glazing. Order execution requires individual arrangements with the PORTA Contract Department. Porta SYSTEM door frame (27 db) Reinforced Porta SYSTEM door frame (32 db) Door leaves cross sections perforated chipboard (27 db) multilayer chipboard (32 db) perforated chipboard + lead screen (ROENTGEN) Additional charges (option) 100 size handle with escutcheon leaf frame made of exotic timber (in Rw = 27 db only) reinforcement for the Porta SYSTEM frame, size A reinforcement for the Porta SYSTEM frame, size B, C, D, E, F reinforcement for the Porta SYSTEM frame, size G, H, I, J, K expanding the frame section from 80 to 100 mm expanding the frame section from 101 to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm free of charge 101

Rw=42 db Non-typical project depicted in the photo (Porta CONTRACT). PORTA recommends The rooms exposed to an increased noise level, which need high noise insulation, we offer interior entrance doors with Rw=42 db insulation class. The door leaf installed complete with a metal frame has 30 minute fire resistance and is smokeproof so that it protects against fire effects, particularly against very dangerous CO effects. This model may be used in high specification public or residential buildings. 102 flat pattern 2 pattern 3 pattern 4 pattern 6 pattern 7 pattern 8 pattern 9

HQ CPL veneer (flat) White Milano 1 Grey Euroinvest Milano 2 Beech Porta Milano 3 PVC veneer (flat and slot-milled) Light beech Alder Apple tree Golden Walnut White wood grains Standard natural veneer (flat) Mahogany Maple Walnut Milano 4 Milano 5 1 2 3 4 5 Limba 1 Limba 2 Limba 3 Limba 4 Maple 1 Sapelli 3 Sapelli 4 Select natural veneer (flat with vertical wood grains) Teak Cherry Rosewood Wenge Ebony DOOR LEAF CONSTRUCTION The door leaf consists of exotic sawn timber frame fi lled with a special PORTA multi-layer sound insulating core and covered from both sides with HDF boards. LEAF EDGE PROFILE Both side edges and higher part are varnished with transparent lacquer. Double rebate on three edges (two vertical and one horizontal). FINISHING The leaf is veneered with HQ CPL laminate 0.7 mm thick, natural veneer (fl at door leaves only) or PVC veneer (fl at and slot-milled). MODELS Single leaf: full -fl at and slot-milled. ACCESSORIES included in the leaf price three (two in a metal frame) reinforced pintle hinges, made of steel, fl ushmounted lock for cylinder insert two automatic threshold seals circumferential rubber seal at the leaf and frame mating point temperature expandable seal (fi re-resistant doors) door frame LEAF SIZES (page 139, table 3) 80, 90, 100 RECOMMENDED DOOR FRAMES Adjustable reinforced Porta SYSTEM door frame (type DT-AW/PS) for wall thickness between 120 mm and 300 mm. Frame beams are made of plywood. Door frame is covered with HQ CPL, PVC or natural veneer, in accordance with the Porta SYSTEM color range. Information about the full extent of regulation and price range for this door frame is available on our website. Angle-bar metal door frame of profi le 120 mm wide (type DT-AW/M), made of both sides zinc-coated steel 1.5 mm thick. It is painted with power paint in one of standard colours: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028), prepared for installation of self-closer. Door frame is available in two versions: level 0 or level -30. PROJECT door frame (page 130) White American Walnut NOTES: To meet the Technical Approval requirements, 30-minute fi re resistant doors need to be equipped with a self-closing device. Acoustic class Rw = 42 db (range 42 46 db). Available profiles of door frames Metal door frame (42 db) Reinforced Porta SYSTEM door frame (42 db) Door leaves cross sections PORTA multilayer construction (42 db) Additional charges (option) 100 size handle with escutcheon reinforcement for the self-closing device in the Porta SYSTEM expanding the frame section from 121 to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm 103

EI 30, EI 60 PORTA recommends novelty Two types of door with special fire resistance EI 30 of 30 minutes and EI 60 of 60 minutes. They perfectly work in the fire walls, where the door fire resistance class should correspond to the half of the wall fire resistance class. The EI 30 single and double doors in full and glazed version and EI 60 single full 1 doors ensure protection against fire spreading and provide with 32 db noise insulation. The doors are generally applied in all public services such as hotels, schools, hospitals, etc. We offer doors complete with the door frames. Full doors in PVC veneer are available in slot-milled patterns (see page 102). 104 full pattern 2 (EI 60) pattern 3 (EI 30) (EI 60) (EI 30) samples of glazings in contractual offer double doors

HQ CPL veneer (flat) DOOR LEAF CONSTRUCTION The leaf frame is made of exotic timber dressing (EI 30) or of a fi nger jointed softwood (EI 60). The core consists of fi re resistant chipboards positioned in layers. The leaf skin is an HDF board. Glazed leaves use multi-layer, transparent, fi re resistant combined EI 30 or EI 60 glass. White Grey Euroinvest Beech Porta Mahogany Maple Walnut LEAF EDGE PROFILE Both side edges and higher part are covered with skirting tape in the color of the door leaf. The leaf itself is made in the rebate version. Milano 1 Milano 2 Milano 3 PVC veneer (flat and slot-milled) Light beech Alder Apple tree Golden Walnut White wood grains Standard natural veneer (flat) Milano 4 Milano 5 FINISHING The leaf is veneered with HQ CPL laminate 0.7 mm thick (fl at door leaves only), natural veneer (fl at door leaves only) or PVC veneer (fl at and slot-milled). MDF frame (EI 30) or hard wood frame (EI 60) are veneered using the colour of a door leaf. MODELS Single doors: full fl at or slot-milled, glazed and double EI 30 or EI 60. ACCESSORIES included in the leaf price three (EI 30) or four (EI 60) hinges lock for cylinder insert fi re-proof pane (width is not dependent on leaf size) thermo-swelling seal in door leaf fi re resistant seal in door frame automatic threshold seal in the leaf bottom edge door frame 1 2 3 4 5 Maple 1 LEAF SIZES (page 139, table 3) Single leaf: 60, 70, 80, 90, 100 2 1 Double leaf: 120 200 Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 Select natural veneer (flat with vertical wood grains) White Teak American Walnut Cherry Rosewood Wenge Ebony RECOMMENDED DOOR FRAMES MDF door frame of profi le 100 mm wide and adjustable EI30(160 mm), equipped with adjustable hinges in leaf color, in accordance with door leaf color range. Wooden door frame of profi le 100 mm wide (EI 60) made from triple layer pine wood, equipped with adjustable hinges, veneered in leaf colour. Angle-bar metal door frame of profi le 100 mm wide, made of both sides zinc-coated steel 1.5 mm thick. It is painted with power paint in one of standard colours: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028). It is equipped with assembly dowels and prepared for installation of self-closer mechanism. Door frame is available in two versions: level 0 or level -30. PROJECT door frame (page 130) NOTES: To meet the Technical Approval requirements, fi re resistant doors need to be equipped with a self-closing device. Acoustic class Rw = 32 db (range 32 36 db). EI 60 doors have acoustic in single full pattern. Available profiles of door frames 1 To meet smoke tightness S60 single full EI60 doors with wooden door frame need to be equipped with additional seals. 2 In EI 60 doors, size 100 not available in standard offer - requires individual arrangements (Porta CONTRACT). MDF door frame (EI 30) Adjustable MDF door frame (EI 30) 1 Metal door frame (EI 30 / EI 60) fire-resistant chipboard (EI 60) Door leaves cross sections Wooden door frame (EI60) fire-resistant perforated chipboard (EI 30) Additional charges (option) 100 size handle with escutcheon quarter round, masking architraves anti-smoking seals (EI 60) the frame section from 80 to 100 mm expanding the frame section from 101 to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm free of charge 105

ENDURO PORTA recommends ENDURO technical interior doors of highest quality, abrasion and external factor resistance class. ENDURO series is a new range of doors which feature mechanical strength and modern design. The highest resistance parameters has been obtained, among other things, due to the use of a profi led stainless steel strip and exceptionally resistant HPL veneer. Primarily designed for use in all structures exposed to a heavy everyday traffic such as airports, trade centres, hospitals, hotels etc. 106 full pattern 1 pattern 2 pattern 3 pattern 4

HPL veneer Blue White Grey Euroinvest Beech Apple tree Mahogany (1) (2) Light yellow ENDURO equipment Green DOOR LEAF CONSTRUCTION The door leaf consists of a fi nger jointed softwood frame fi lled with reinforced solid chipboard. The leaf is also additionally reinforced with an internal sill and covered on both sides with HDF boards. LEAF EDGE PROFILE K profi le leaf edge - the side edges are reinforced with rustless steel architraves. The leaf itself is made in the rebate version (except swing-leaf version). FINISHING The door leaf is veneered with HPL laminate with 0.7 mm thick. MODELS Single leaf: full, glazed. Every model can be ordered as a swing version. ACCESSORIES included in the leaf price three reinforced standard pintle hinges (in a swing-leaf stainless steel version) pane pattern (transparent or hardened mat) lock: for regular key, bathroom lock or for cylinder insert door frame LEAF SIZES (page 139, table 3) Single leaf: 60 100 Dimensions for assembling as for the angle-bar large frame or for door frame in swing version. DOOR FRAME Angle-bar metal frame of profi le 100 mm. The frame is made of both sides zinc coated steel 1,2 mm thick. It is equipped with: three standard pintle hinges, circumferencial rubber seal, six assembly dowels. It s also painted with polyester powder paint: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028), green (RAL 6019). Door frame is available in two versions: for setting on already prepared fl oor level 0 for cementing in the fl oor level -30. (3) (4) (5) (6) Door leaves cross sections perforated chipboard (ENDURO) WARRANTY 10 years for door construction Additional charges (option) 100, 110 size handle with escutcheon (EDEL) the frame section from 80 to 100 mm expanding the frame section from 101 to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm (1) upper panel (set on two sides) (2) bottom panel (set on two sides) (3) bottom ventilation panel (set on two sides) (4) ventilation grid (set on two sides) (5) straight handle (set on one sides) (6) swing version free of charge 107

AQUA PORTA recommends AQUA type doors turn out to be useful in rooms with high humidity. Door structure enables use in all types of rooms exposed to direct contact with water. Applied HPL coat, resistant to mechanical damage guarantees long-term exploitation of doors in extreme conditions. Doors are especially suitable for swimming pools, car washes, bathhouses, etc. 108 full pattern 1 pattern 2 pattern 3 pattern 4

HPL veneer Blue White Grey Euroinvest DOOR LEAF CONSTRUCTION Door leaf frame is made of slow-burning, chemical resistant, water-resistant material. Core is made of hard polyurethane foam with similar properties. Door leaf components are joined using water-resistant and chemical resistant adhesive. Frame with core is coated from both sides with HPL material resistant to mechanical damage. PROFIL Door leaf is available only in non-rebate version. FINISHING Door leaf is coated with HPL veneer (1.5 mm thick). MODELS Single leaf: full and with glazing. ACCESSORIES included in the leaf price two hinges made of stainless steel pane pattern (transparent or hardened mat) lock made of stainless steel available in three versions: for regular key, with bathroom lock or cylinder insert door frame LEAF SIZES (page 139, table 3) Single leaf: 60 100 DOOR FRAME Large angle-bar frame of profi le 100 mm. The frame is made of both sides zinc coated steel 1.2 mm thick. It is equipped with: two hinges pintle standard, circumferential rubber seal, six assembly dowels. It s also painted with polyester powder paint: white (RAL 9016), grey (RAL 7047) or blue (RAL 5005). Door frame is available in two versions: for setting on already prepared fl oor level 0 for cementing in the fl oor level -30. Door leaves cross sections hard polyurethane foam (AQUA) Additional charges (option) 100 size handle with escutcheon (EDEL) ventilation grid made from stainless steel the frame section from 80 to 100 mm expanding the frame section from 101 to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm free of charge 109

Metal Non-typical project depicted in the photo (Porta CONTRACT). PORTA recommends Metal doors are manufactured with two coating versions: acid proof and zinc-coated steel sheet in painted or PVC coated version. High technical parameters ensured the certificate of the National Institute of Hygiene for the metal doors and they may be used in hospitals, laboratories, restaurants, utility rooms, basements, garages etc. 110 full pattern 1 pattern 2 pattern 3 pattern 4 pattern 3 Acid-resistant steel sample

Polyester paint White (RAL 9016) Grey (RAL 7047) Cream (RAL 1001) PVC laminated steel sheet Golden Walnut Mahogany Steel Acid-proof stainless steel Brown (RAL 8028) Door leaves cross sections honeycomb stabilizing DOOR LEAF CONSTRUCTION Closed jacket structure of brushed stainless steel (acid proof) or steel sheet zinc-coated on both sides, painted or PVC laminated (extra charged option) 1. The leaf fi lled with foamed polystyrene, mineral wool or reinforced honeycomb core with wood inserts for hinges and lock. For acid proof version stainless steel hardware are provided. LEAF EDGE PROFILE Both sides and the upper edge of the leaf come in leaf color fi nish. The leaf itself is made in the rebate version. FINISHING Zinc-coated sheet leaf fi nish: powder-coated with polyester primer paints (honeycomb or mineral wool core) not painted (fi lled with foamed polystyrene) wood-like PVC laminate (for all types of cores) Brushed stainless steel fi nish (acid proof): no coating for any type of core. MODELS Single and double doors (only for door leaves from zinc-coated steel): full, glazed. ACCESSORIES included in the leaf price two standard pintle hinges (three hinges for a leaf of dimension 100 ) lock for cylinder insert pane pattern (transparent or hardened mat) LEAF SIZES (page 139, table 3) Single leaf:,,60,,,70,,,80,,,90,,,100 Double leaf (only for zinc-coated leaves ): 120 200 2 RECOMMENDED DOOR FRAMES (from page 116) Large angle-bar door frame to be assembled, made of brushed stainless steel (acid proof) Metal door frames. NOTES: Door leaves made of acid-resistant steel or with foamed polystyrene are available in non-varnished version foamed polystyrene (U = 0,88 W/m 2 K) 1 PCV coating may only be provided for solid or bull s eye doors (Model No 4). 2 Arbitrary selection of door leaf sizes for double doors. mineral wool (U = 0,91 W/m 2 K) Additional charges (option) Size 100 (zinc-coated leaves) Size 100 (stainless steel acid proof leaves) PCV laminate ventilation sleeves (zinc-coated leaves) ventilation grid (zinc-coated leaves) handle with escutcheon third hinge for the leaf dimensions 60, 70, 80 or 90 111

Metal EI 30 PORTA recommends Metal doors with special fire resistant qualities EI 30 are a universal solution for application in any kind of building meant for public use. Doors provide excellent protection from spreading fire in our garage, basement, workshop and in large warehouses and halls. The self-closing mechanism installed allows for efficient traffic flow and increases the level of safety by separating the danger zone from the rest of the rooms. 112 full pattern 1 pattern 2 pattern 3

Polyester paint White (RAL 9016) Grey (RAL 7047) Cream (RAL 1001) Brown (RAL 8028) DOOR LEAF CONSTRUCTION Leaf plate, 53 mm in total thickness, is an enclosed sleeve construction made of galvanized steel metal plate 0,8 mm thick. Leaf structure is reinforced by steel fl at bars. Leaf fi lling consists of mineral wool. LEAF EDGE PROFILE Leaf is produced with a double rebate (20 mm wide). FINISHING Made of galvanized steel plating painted with polyester powder paint. MODELS Single leaf: full or glazed. ACCESSORIES included in the leaf price two triple element hinges, one of them is a load bearing one, the other, thanks to the spring enclosed in it, facilitates doors closing on their own insert lever lock anti-leverage security bolt set of door handles with plates transparent fi reproof pane LEAF SIZES (page 139, table 3) Single leaf:,,60,,,70,,,80,,,90,,,100 DOOR FRAME Angle-bar metal door frame with an 84 mm wide edge. Made of double sided sherardized steel plate of 1,5 mm thickness. Varnished using powdered primer paint in white (RAL 9016), grey (RAL 7047), brown (RAL 8028), cream (RAL 1001). Fitted with cushion seal and expansion seal. Possibility to order metal door frames in one of two versions: for setting on the ready fl oor level 0 for cementing in the fl oor level -30 equipped with a threshold element. Door leaves cross sections NOTES: Full doors, as well as patterns 1 and 3 sold as sets with the -30 level frame do not have the direction of opening marked and are universal with this respect. To meet the outside door approval requirements, glazed models must be equipped with glass characterized by special parameters price and execution lead time to be arranged with the PORTA Contract Department. mineral wool (U = 0,91 W/m 2 K) Additional charges (option) fireproof eye-viewer reinforcement for the self-closing device 113

DOOR FRAMES, TRANSOMS There are no complete doors without door frames. PORTA KMI Poland offer for each door model a door frame, which is technically and aesthetically compatible with the door. Our range includes many door frames with modern shape available with many finishes: natural, synthetic or metal veneers. In order to keep the proper parameters specific for entrance, technical and metal doors it is necessary to use our compatible door frame. At the same time we would like to assure you that all our door frames comply with the Polish Standard and may be used with the door leaves of other producers. MINIMAX door frame Porta SYSTEM adjustable door frame PRESTIGE adjustable door frame Transoms Small ANGLE-BAR door frame Large ANGLE-BAR door frame Folding large ANGLE-BAR door frame new colours! METAL adjustable door frame AGATE-OPAL door frame METAL sliding door system PROJECT door frame Enjoy the quality!

MINIMAX interior door frames, fixed width: 60 mm and 100 mm 60 mm, synthetic veneer 100 mm, synthetic or natural veneer seal cover plate Examples of installation Installed in brick wall using foam and anchors. Installed in brick wall using foam. Installed in plaster board wall using foam. Installed in plaster board wall using tap screws. 116

Minimax veneer White Beech Apple tree Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 PVC veneer Light beech Alder Apple tree Golden Walnut HQ CPL veneer White Milano 1 Grey Euroinvest Milano 2 Beech Porta Milano 3 Standard natural veneer Maple Mahogany Walnut Milano 4 Milano 5 1 2 3 4 5 Maple 1 PORTA recommends MINIMAX interior door frames with constant width of 100 mm are compatible with all Porta interior door leaves provided with Minimax, Portadecor, PVC, HQ CPL, Portadur and natural veneers. Door frames 60 mm wide are compatible only with MINIMAX doors and all interior doors with Portadecor veneer. CONSTRUCTION The frame consists of: one horizontal and two vertical MDF beams, equipped with appropriate hardware and accessories architraves (charged additionally) quarter round (optionally charged additionally) The door frame is manufactured and delivered to the customer as a set of components to be assembled on site. FINISHING The frames are veneered with: Minimax, Portadecor, Portadur, PCV, HQ CPL, and natural wood veneers. ACCESSORIES included in the Minimax 60 mm price (available in MINIMAX and Portadecor veneer only) two standard pintle hinges three hinges for the frame of size 100 stops dowels, plugs plastic cover plates for frame bottom protection against moisture ACCESSORIES included in the Minimax 100 mm price synthetic veneers: two standard pintle hinges three hinges for the frame of size 100 and in all sizes of door frames veneered with Portadur veneer natural veneers: two sets of PORTA hinges three sets of PORTA hinges in frame of size 90 and 100 and in all select natural veneers circumferential rubber seal around the door frame overlays against moisture down the door frame DOOR FRAME SIZES (page 138) Width: 60 mm and 100 mm. 60, 70, 80, 90, 100 and any combination of these sizes in case of double doors. Limba 1 Limba 2 Limba 3 Limba 4 Pine 1 Pine 2 Pine 3 Pine 4 Select natural veneer Sapelli 3 Sapelli 4 NOTES: The door frames must be installed in rooms with completely fi nished walls (wallpaper, for example) and fl oors (wooden fl ooring, for example). Possibility to order the door frame (100 mm) in tunnel version (without hinges, lock and seal groove). Teak Cherry Rosewood Wenge Ebony White American Walnut Additional charges (option) third hinge for the frames of size 60-90 veneered with synthetic veneers third hinge for the frames of size 60-80 veneered with natural veneers masking architraves, straight or rounded quarter round 117

Porta SYSTEM adjustable interior door frame Porta SYSTEM with Adjustment Panel panel Porta SYSTEM + Module RETRO Wall thickness range - Porta SYSTEM 20 mm A B C D E F G H I J K Wall thickness range 75 95 mm 95 115 mm 120 140 mm 140 160 mm 160 180 mm 180 200 mm 200 220 mm 220 240 mm 240 260 mm 260 280 mm 280 300 mm Minimum Maximum Wall thickness range - Adjustment Panel 80 mm (or 160 mm) Minimum Maximum 118

Minimax veneer White Beech Apple tree Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree PORTA recommends An easily assembled adjustable door frame. This allows for ideal adjustment to the wall thickness and to obtain an exceptionally aesthetic fi nish. Reinforced hinge pockets guarantee construction stability even with very intensive use. Wide range of colours allows adjustment any Porta leaf. Porta SYSTEM constitutes a set with all types of interior door leaves. We especially recommend a very interesting solution to what is the use of overlay on the frame as a module RETRO. Easy to install overlay can be installed not only for the purchase and installation of new frames, but also in a situation where we are dealing with a previously Porta SYSTEM door frame. This procedure will allow you to obtain a completely different and new style door what can encourage You to seek new inspiration related to the housing arrangements as a a consequence. Pear tree Walnut Wenge Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 PVC veneer Light beech Alder Apple tree Golden Walnut HQ CPL veneer White Milano 1 Grey Euroinvest Milano 2 Beech Porta Milano 3 Standard natural veneer Maple Mahogany Walnut Milano 4 Milano 5 1 2 3 4 5 Maple 1 CONSTRUCTION The door frame consists of: one horizontal and two vertical made of solid chipboard, equipped with appropriate hardware and accessories. architraves. The Porta SYSTEM door frame is manufactured and delivered to the customer as a set of components to be assembled on site. FINISHING The frames are veneered with: Minimax, Portadecor, Portadur, PCV, HQ CPL and natural wood veneers. Colors veneers are matched to the colors of door leaves which are in the standard PORTA KMI Poland offer. ACCESSORIES included in the door frame price synthetic veneers: two standard pintle hinges three hinges for the frame of size 100 and in all sizes of door frames veneered with Portadur veneer natural veneers: two sets of PORTA hinges three sets of PORTA hinges in frame of size 90 and 100 and in all select natural veneers circumferential rubber seal around the door frame DOOR FRAME SIZES (page 138, table 1) For eleven ranges of wall thickness, from 75 mm up to 300 mm: 60, 70, 80, 90, 100, 110 and 120 200. In case of single doors 60 90 with side panel 40 1. Limba 1 Limba 2 Limba 3 Limba 4 Pine 1 Pine 2 Pine 3 Pine 4 Select natural veneer Sapelli 3 Sapelli 4 NOTES: The door frames must be installed in rooms with completely fi nished walls (wallpaper for example) and fl oors (wooden fl ooring for example). Possibility to order the door frame in tunnel version (without hinges, lock and seal groove). RETRO module not available in HQ CPL veneer. 1 Applies only to the door frame in natural veneer. Teak Cherry Rosewood Wenge Ebony White American Walnut Additional charges (option) third hinge for the frames of size 60-90 veneered with synthetic veneers third hinge for the frames of size 60-80 veneered with natural veneers reinforcement for the self-closing device 119

PRESTIGE adjustable interior door frame A B C D E F G H I J K L M N O P R S T Wall thickness range 100 110 mm 110 120 mm 120 130 mm 130 140 mm 140 150 mm 150 160 mm 160 170 mm 170 180 mm 180 190 mm 190 200 mm 200 210 mm 210 220 mm 220 230 mm 230 240 mm 240 250 mm 250 260 mm 260 270 mm 270 280 mm 280 290 mm Wall thickness range PRESTIGE door frame 10 mm Minimum Maximum 120

Minimax veneer White Beech Apple tree Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 Standard natural veneer 1 2 3 4 5 Limba 1 Limba 2 Limba 3 Limba 4 Pine 1 Pine 2 Pine 3 Pine 4 Select natural veneer Maple 1 Sapelli 3 Sapelli 4 Teak Cherry Rosewood Wenge Ebony PORTA recommends Elegant adjustable interior PRESTIGE door frame belongs to the group of the highest quality and most advanced products. The rounded beam and door trims emphasize the modern design and allow to use PRESTIGE door frame in the exclusive spaces and wherever aesthetics and quality are a priority. CONSTRUCTION The door frame consists of: one horizontal and two vertical made of MDF, quipped with appropriate hardware and accessories: architraves. The PRESTIGE door frame is manufactured and delivered to as a set of components to be assembled on site. FINISHING The frames are veneered with: Minimax, Portadecor, Portadur and natural wood veneers. Colors veneers are matched to the colors of door leaves which are in the standard PORTA KMI Poland offer. ACCESSORIES included in the door frame price synthetic veneers: two pintle hinges standard three hinges for the frame of size 100 and in all sizes of door frames veneered with Portadur veneer natural veneers: two sets of PORTA hinges three sets of PORTA hinges in frame of size 90 and 100 and in all select natural veneers circumferential rubber seal around the door frame DOOR FRAME SIZES (page 138, table 1) For nineteen ranges of wall thickness from 100 mm up to 290 mm: 60, 70, 80, 90, 100 and 120 200. In case of single doors 60 90 with side panel 40 1. NOTES: The door frames must be installed in rooms with completely fi nished walls (wallpaper for example) and fl oors (wooden fl ooring for example). Possibility to order the door frame in tunnel version (without hinges, lock and seal groove). White American Walnut 1 Applies only to the door frame in natural veneer. Additional charges (option) third hinge for the frames of size 60-90 veneered with synthetic veneers third hinge for the frames of size 60-80 veneered with natural veneers 121

Transoms interior door frame Transom construction Size in the rabbet Wall thickness range A B C D E F G H I J K 75 95 mm 95 115 mm 120 140 mm 140 160 mm 160 180 mm 180 200 mm 200 220 mm 220 240 mm 240 260 mm 260 280 mm 280 300 mm Transom adjustment ranges Minimum Maximum 20 mm 122

Minimax veneer White Beech Apple tree Portadecor veneer Grey Euroinvest Beech Bavaria Alder Cherry tree Pear tree Walnut Wenge Portadur veneer Walnut 1 Walnut 2 Walnut 3 Walnut 4 Walnut 5 Walnut 6 PVC veneer PORTA recommends It is worth using modern and functional transoms to glaze the partition walls and obtain more light in the rooms. They are an extension of the Porta SYSTEM door frames offer and use a similar production technology. Wide range of colours, quick and simple assembly ensure the popularity of this offer. The transoms allow to divide the rooms without loss of light. CONSTRUCTION Transoms include main beams (two horizontal and two vertical beams made of wood-derived materials), set of glazing beads, main beam connectors and trims. Transoms are manufactured and delivered to the Customer in the form of sets of lements to be assembled on the site. FINISHING The following veneers are used for transoms: Minimax, Portadecor, Portadur, PVC, HQ CPL and natural veneers. The veneer colours match the standard door leaf colours offered by Porta KMI Poland. DIMENSIONS The range of transoms covers wall thickness between 75 and 300 mm. Transom combined with the Porta SYSTEM; standard height at the rabbet is 270 mm. Ho, Hb, Hz +302 mm Porta SYSTEM door frame height. Light beech Alder Apple tree Golden Walnut HQ CPL veneer White Grey Euroinvest Beech Porta Maple Mahogany Walnut NOTES: Minimum length of the transom side (at the rabbet) is 370 mm, while the max. length (at the rabbet) is as follows: 2300 mm for Portadecor, Portadur and synthetic veneers; 2500 mm for HQ CPL laminate; 2300 mm for natural veneers. Transom is not glazed. Recommended glazing thickness - 4 6 mm. Transom should be installed only after the interior works are fi nished (e.g. wall paper and parquet are in place). Milano 1 Milano 2 Milano 3 Standard natural veneer Milano 4 Milano 5 1 2 3 4 5 Maple 1 Limba 1 Limba 2 Limba 3 Limba 4 Sapelli 3 Sapelli 4 Pine 1 Pine 2 Pine 3 Pine 4 Select natural veneer Teak Cherry Rosewood Wenge Ebony White American Walnut Extra charges for upper transom combined with Porta SYSTEM Minimax or Portadecor veneer HQ CPL or Portadur veneer PVC veneer natural veneer Extra charges (option) apply to Porta SYSTEM prices single door leaves. They do not depend on the wall thickness range. 123

Angle-bar small and large interior metal door frames small large Angle-bar large folding interior door frame made of stainless acid-resistant steel sheet or PVC laminated steel sheet 124

Polyester paint White (RAL 9016) Grey (RAL 7047) Cream (RAL 1001) Brown (RAL 8028) PORTA recommends Zinc-coated or stainless steel (acid proof) door frames are the highest quality product which may be used wherever doors with high resistance to fi re, corrosion and weather are needed. With the automatic powder coating line, the sheet metal used for production is ideally smooth and protected against corrosion. Additionally, wood-like PVC laminate cover meets high aesthetic demands of the customers. Actually, theses door frames may be used in all types of rooms. PVC laminated steel sheet Golden Walnut Mahogany CONSTRUCTION Angle-bar metal door frames (small and large) are made of zinc-coated steel sheet 1.2 mm. Door frames are available as universal design or left and right. Door frame profi le width: 50 mm (small angle-bar) or 100 mm (large angle-bar). Door frames to be assembled are made of brushed stainless steel (acid-proof) (100 mm profi le) or zinc-coated steel sheet laminated with wood-like PVC (80 mm profi le). The door frames to be assembled are manufactured and delivered as elements packed in a carton box for assembly on do-it-yourself basis. FINISHING Small and large angle-bar door frames made of zinc-coated steel sheet are painted with powdered primer paints. Door frames to be assembled are made of stainless steel sheet(acid-proof) (100 mm profi le) or zinc-coated steel sheet laminated with woodlike PVC. ACCESSORIES included in the door frame price Large and small angle-bar as well as folding door frame for masonry walls: two standard pintle hinges three hinges for the frame of sizes 100 and 110 allen wrench circumferential rubber seal (brown, beige or grey) mounting anchors (angle-bar small) Angle-Bar large for gypsum-cardboard walls: two standard pintle hinges three hinges for the frame of sizes 100 allen wrench circumferential rubber seal (brown, beige or grey) special anchor bolts for gypsum walls to make the assembly easier DOOR FRAME SIZES (page 138, table 2) 60, 70, 80, 90, 100, 110 1 i 120 200 1 Door frame is the available in two versions: for setting on ready fl oor level 0, for cementing in the fl oor level -30 2. 1 Dimensions not available for the folding frame. 2 Not available in folding PVC laminated door frame version. Examples of installation Angle-bar small Angle-bar large on the masonry wall 100 mm thick Angle-bar large on the masonry wall 100 mm thick Angle-bar large on the gypsum-cardboard walls Additional charges (option) third hinge for the frames 60, 70, 80, 90 reinforcement for the self-closing device stainless steel threshold installation dowels (Angle-bar large) door frames for double doors expanding the frame section to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm 125

ADJUSTABLE interior metal door frame Exterior side Interior side (round profile) A B C D E F G H Wall thickness range 95 115 mm 120 145 mm 145 170 mm 170 195 mm 195 220 mm 220 245 mm 245 270 mm 270 295 mm 126

Polyester paint White (RAL 9016) Grey (RAL 7047) Cream (RAL 1001) Brown (RAL 8028) PORTA recommends Adjustable door frame made of zinc-coated sheet steel. Width adjustment allows easy match with the desired wall width. Actually, the adjustable door frame may be used in all types of rooms at home, in the offi ces, hotels, industrial establishments and wherever excessive humidity occurs. CONSTRUCTION Adjustable door frame is made of the highest quality galvanized steel sheet 1.5 mm thick. The frame consists of: main beams: horizontal and two vertical architraves circumferential seal pintle hinges FINISHING Polyester powder paint in standard primer version. ACCESSORIES included in the door frame price two standard pintle hinges three hinges for the frame of size 100 and 110 allen wrench circumferential rubber seal (brown or grey) expanding pins (for frames to be mounted in the masonry wall) self-tapping screws (for frames to be mounted in the gypsum cardboard walls) DOOR FRAME SIZES (page 138, table 2) 60, 70, 80, 90, 100, 110 and 120 200. Eight frame adjustment ranges. For setting on ready fl oor level 0. NOTES: The door frames must be installed in rooms with completely fi nished walls (wallpaper for example) and fl oors (wooden fl ooring for example). Examples of installation in different thickness walls Additional charges (option) third hinge for the frames 60-90 stainless steel threshold 127

AGATE, OPAL interior entrance metal frames METAL sliding door system METAL on-wall system (no leaf) for sliding doors 128

Polyester paint PORTA recommends AGATE and OPAL door frames are intended for interior door leaves of the same name. Combination with the quality of Porta entrance doors results in the doors of the highest technical and operational parameters. White (RAL 9016) Grey (RAL 7047) Cream (RAL 1001) Brown (RAL 8028) CONSTRUCTION Metal door frame is made of both sides zinc-coated steel 1.2 mm (AGATE) or 1.5 mm thick (OPAL). FINISHING Made from galvanized sheet - door frame painted with polyester powder paint (in standard primer version). ACCESSORIES included in the door frame price (AGATE) three standard pintle hinges allen wrench circumferencial rubber seal (brown, beige or grey color). ACCESSORIES included in the door frame price (OPAL) three standard pintle hinges allen wrench circumferencial rubber seal (brown, cream or grey) six mounting dowels six hole plugs DOOR FRAME SIZES (page 139, table 3) 80, 90, 100 Door frame profi le width: 100 mm. Door frame is available in two versions: for setting on ready fl oor level 0, for cementing in the fl oor level -30 Examples of installation Additional charges (option) stainless steel threshold installation dowels (AGATE) the frame section from 80 to 100 mm expanding the frame section from 101 to 150 mm expanding the frame section from 151 to 270 mm expanding the frame section from 271 to 390 mm AGATE OPAL free of charge Polyester paint White (RAL 9016) Grey (RAL 7047) Cream (RAL 1001) Brown (RAL 8028) PORTA recommends Metal on-wall system (no leaf) for sliding doors is made especially for compartments with a small surface, where mounting normal door is not practical. CONSTRUCTION Complete system consists of: large angle door frame installed onto a 100 mm wide wall made in tunel version (without hinges, lock and seal groove); rails with carriages; rail covers and bumper beam. All elements are manufactured from galvanized steel sheets and delivered in a cardboard box to be assembled on site. FINISHING Door frame, rail covers and bumper beam are painted with polyester powder. ACCESSORIES included in the set price adhesive seal guiding element that stabilizes the door leaf vertically (to be mounted to the fl oor) SET SIZES (page 141, table 5) 60, 70, 80, 90, 100. The set is manufactured in the version for setting on ready fl oor level 0 and available as universal design (i.e. no left or right side) once you decide whether the doors are to slide left or right, you install the bumper strip on the choosen side. 129

PROJECT interior entrance metal door frame fitted with veneered masking overlays B C D E F G H I J K Wall thickness range 140 160 mm 165 185 mm 185 205 mm 205 225 mm 225 245 mm 245 265 mm 265 285 mm 285 305 mm 305 325 mm 325 345 mm 130

PVC veneer Light beech Alder Apple tree Golden Walnut HQ CPL veneer PORTA recommends Door leaves of best technical parameters guaranteeing the highest level of safety and comfort of use most often come in sets including a metal door frame. With increased interior aesthetics spaces fi tted with this type of door in mind, we have added a PROJECT door frame to complement our offer. This door frame is adapted to fi t with the AGATE, OPAL, KWARC, GRANITE, Rw=27 db, Rw=32 db, Rw=42 db, EI 30, EI 60 door types. Thanks to a specially designed metal piece profi le it is easy to install the Porta SYSTEM overlays ensuring smooth and aesthetic installation fi nish. White Milano 1 Grey Euroinvest Milano 2 Beech Porta Milano 3 Standard natural veneer Maple Mahogany Walnut Milano 4 Milano 5 1 2 3 4 5 Limba 1 Limba 2 Limba 3 Limba 4 Pine 1 Pine 2 Pine 3 Pine 4 Select natural veneer Maple 1 Sapelli 3 Sapelli 4 Teak Cherry Rosewood Wenge Ebony CONSTRUCTION Complete PROJECT door frame consists of: Metal angled door frame with pre-molded profi le to fi t the Porta SYSTEM overlays made of galvanized steel plate 1,2 mm thick (AGATE), or 1,5 mm thick (OPAL, QUARTZ, GRANITE, Rw=27 db, Rw=32 db, Rw=42 db, EI 30, EI 60), Special uncut Porta SYSTEM elements including one horizontal and two vertical beams and sheathing strips made of imitation wood materials. PROJECT door frame is produced and delivered to the client as a complete set of elements for on-site assembly. FINISHING The metal part of the door frame is powder painted using primer paint in one of the following colors: white (RAL 9016), grey (RAL 7047), brown (RAL 8028), cream (RAL 1001). Porta SYSTEM overlays are covered using either of the following veneers: HQ CPL, PVC and natural wood veneers. ACCESSORIES included in the door frame price standard for the door frame type made to fi t the leaf chosen. DOOR FRAME SIZES (page 139, table 3) 80, 90, 100. Possibility to order metal part of door frame in one of two options: for setting on ready fl oor level 0, for cementing in the fl oor level -30 White American Walnut NOTES: Minimum wall thickness means the lower range value dimension A. The PROJECT door frame price equals the price of a standard metal frame included with the given type of technical or entrance doors, increased by the price of the Porta SYSTEM cover. Polyester paint White (RAL 9016) Grey (RAL 7047) Cream (RAL 1001) Brown (RAL 8028) PROJECT door frame profile illustration A B adjustment + 20 mm * applies to door frame for EI 60 doors 30 mm 40 mm* A B GRANITE, EI 30 140 345 mm 90 mm AGATE, OPAL, QUARTZ, Rw = 27 db, Rw = 32 db 136 341 mm 86 mm Rw = 42 db, EI 60 161 366 mm 111 mm 131

Handles collection LOGO Metal handle with rosette golden, silver FLUO Metal handle with rosette golden silver for regular key for cylinder insert bathroom lock NOVA Metal handle with rosette golden, mat golden, silver, mat silver LINK Metal handle with rosette golden, mat golden, silver, mat silver for regular key for cylinder insert bathroom lock MINIMAX Metal handle (72) White MINIMAX Metal handle (72) golden, silver for regular key for cylinder insert bathroom lock ARKADIA Metal handle (72) golden, silver, bronze 132 for regular key for cylinder insert bathroom lock

PORTA (class C ) Metal handle (72) (golden, titanium, bronze) with standard holder with knob holder upper lock board ECO (security class 3 according to PN EN 1906) Metal handle (72) (gold-yellow, silver, bronze) with standard holder with knob holder upper lock board EDEL Metal handle with rosette, made of acid-resistant steel for cylinder insert MINI Plastic handle (72), black, for metal doors for regular key and cylinder insert 133

Additional accessories MASKING ARCHITRAVES Straight architraves Rounded architraves Quarter round (2,15 m) VENTILATION Ventilation sleeves I row (different colors) Ventilation sleeves II rows (different colors) Ventilation undercut Ventilation grid to be placed (different colors) Ventilation slot Prepartion for shortening (up to 60 mm) 134

Additional accessories HINGES AND COVERS Extra charge for additional hinge in door frame made of woodlike materials and in leaf: standard hinge PORTA hinge Extra charge for third hinge in metal zinc-coated door frame. PORTA hinges. Available colors: golden, mat golden, silver, mat silver. Covers for standard hinges for interior doors (set for one hinge): Available colors: white, mat silver, chrome, golden Cover for hinges for exterior doors GDYNIA and WROCLAW (set for one hinge). Available colors: golden or silver. PRIME hinges, retail sale: Available colors: golden, mat golden, silver, mat silver. BULL S EYES MADE OF ACID-RESISTANT STEEL Bull s eye is available only in door leaves with chipboard core in following types of doors: MINIMAX, Porta DECOR, HQ CPL veneered, ENDURO, Porta NOVA, Porta LINE, Porta CLASSIC, Nova NATURE, Nature LINE. Internal diameter is 250 mm for the wings of 60 and 70, and 300 mm for the others. There is a transparent pane or safety mat with a thickness of 6 mm to be chosen. Extra charge for bull s eye. 135

Additional accessories ADDITIONAL EQUIPMENT Round flush handle for sliding doors included in the door price. Available colors: silver (white doors) and golden (all others). Hook lock with side handles (for sliding doors). Available colors: golden, matte golden, silver, mat silver. Self-closing device Available colors: silver, brown Side locks for sliding doors. Available colors: golden, mat golden, silver, mat silver. Stainless steel threshold for Porta door frames: standard (90 mm), extended (120 mm). Wide-angle eye-viewer. Available colors: silver Two cylinder insert B class Available colors: silver, golden. GLASS APPLIQUE pattern A pattern B pattern C pattern D pattern E pattern F NOTE! Due to the print technology the colours of the presented assortments can differ from the original. 136

The dimensions of the door assembly ready floor level ready floor level ready floor level MINIMAX door frame Porta SYSTEM door frame PRESTIGE door frame with METAL angle-bar door frame ready floor level METAL sliding door system ready floor level DOOR SIDES Left doors ready COMPACT sliding door system floor level Right doors SZ S0 SB EDGE OF INTERIOR DOOR LEAF MG 22 DS BG SS MS PORTA sliding door system HZ HS H0 ready floor level 137

Door sizes tables Polish Standard (PN) LEGEND S S H S D S S 0 H 0 S B H B S Z H Z M S M G B G T S/W S C H C total leaf width, including rebates total leaf height, including rebate thickness of door leaf width of wall opening ready for door frame setting height of wall opening ready for door frame setting, measured from the finished floor level width of door frame, door trims excluded height of door frame, door trims excluded total width of door frame, including door trims total width of door frame, including door trims width of sliding door masking system thickness of sliding door masking system thickness of sliding door stop beam permissible deviation from width/height of wall opening width of wall opening ready for built-in cassette height of wall opening ready for built-in cassette (measured from the finished floor level) All dimensions in millimeters [mm]. Interior doors with wooden door frames Table 1 with door frames: Minimax 60 mm Minimax 100 mm Rondo 100 mm MDF In natural veneer with adjustable Porta SYSTEM door frame with adjustable PRESTIGE door frame Size S S H S D S S 0 H 0 S B H B S Z H Z T S/W 60 644 710 690 800 70 744 810 790 900 80 844 2030 40 910 2075 890 2060 1000 2115 90 944 1010 990 1100 100 1044 1110 1090 1200 60 644 680 646 746 70 744 780 746 846 80 844 880 846 946 2030 40 2060 2038 90 944 980 946 1046 100 1044 1080 1046 1146 110 1144 1180 1146 1246 60 70 644 744 710 810 690 790 818 918 80 844 2030 40 910 2075 890 2060 1018 90 944 1010 990 1118 100 1044 1110 1090 1218 2088 2124 +20 / +10 +20 / +10 +20 / +10 Interior doors with metal door frames Table 2 with small angle-bar metal door frame with large angle-bar metal door frame (for masonry walls) with large angle-bar metal door frame (for plasterboard walls) with Adjustable door frame Size S S H S D S S 0 H 0 S B H B S Z H Z T S/W 60 644 650 629 686 70 744 750 729 786 80 844 2030 40 850 2045 829 2033 886 2061 90 944 950 929 986 100 1044 1050 1029 1086 60 644 675 656 686 70 744 775 756 786 80 844 875 856 886 2030 40 2055 2046 90 944 975 956 986 100 1044 1075 1056 1086 110 1144 1175 1156 1186 60 644 680 680 686 70 744 780 780 786 80 844 880 880 886 2030 40 2055 2046 90 944 980 980 986 100 1044 1080 1080 1086 110 1144 1180 1180 1186 60 644 700 680 716 70 744 800 780 816 80 844 900 880 916 2030 40 2070 2058 90 944 1000 980 1016 100 1044 1100 1080 1116 110 1144 1200 1180 1216 2061 2061 2076 ±10 / ±5 ±10 / ±5 +10 / +5 10 / 5 138

Door sizes tables Polish Standard (PN) Interior entrance and technical doors Table 3 AGATE, OPAL, QUARTZ, GRANITE Rw = 27 db with PORTA System door frame Rw = 32 db with reinforced Porta SYSTEM door frame Rw = 42 db with reinforced Porta SYSTEM door frame Rw = 42 db with metal door frame EI 30 with MDF door frame 100 mm EI 30 Rw = 27 db, Rw = 32 db with metal door frame EI 60 with wooden door frame EI 60 with metal door frame Metal EI 30 ENDURO with swing version door frame for ENDURO doors AQUA Size S S H S D S S 0 H 0 S B H B S Z H Z T S/W 80 844 40/44 875 856 906 90 952 2030 44/48 985 2055 964 2046 1014 2071 100 1044 45/47 1075 1056 1106 60 70 644 744 680 780 646 746 746 846 80 844 2030 40/44 880 2060 846 2038 946 90 944 980 946 1046 100 1044 1080 1046 1146 60 70 644 744 680 780 646 746 746 846 80 844 2030 44/48 880 2060 846 2038 946 90 952 988 954 1054 100 1044 1080 1046 1146 80 868 915 872 968 90 968 2047 69 1015 2080 972 2056 1068 100 1068 1115 1072 1168 80 90 888 988 2047 69 890 990 2055 870 970 2045 950 1050 100 1088 1090 1070 1150 60 644 750 722 824 70 744 850 822 924 80 844 2030 44/48 950 2090 922 2077 1024 90 952 1060 1030 1132 100 1044 1150 1122 1224 60 70 80 90 644 744 844 952 2030 44/48 40/44 40/48 675 775 875 985 2055 656 756 856 964 2043 706 806 906 1014 100 1044 1075 1056 1106 60 668 775 747 858 70 768 875 847 958 2030 61/65 2090 2077 80 868 975 947 1058 90 968 1075 1047 1158 60 668 700 681 731 70 768 800 781 831 2030 61/65 2055 2043 80 868 900 881 931 90 968 1000 981 1031 60 70 700 800 695 795 673 773 730 830 80 900 2040 53 895 2065 873 2053 930 90 1000 995 973 1030 100 1080 1075 1053 1110 60 70 644 744 675 775 656 756 686 786 80 844 2030 40 875 2055 856 2046 886 90 952 985 964 994 100 1044 1075 1056 1086 60 70 618 718 745 845 722 822 722 822 80 818 2017 40 945 2085 922 2075 922 90 918 1045 1022 1022 100 1018 1145 1122 1122 60 70 618 718 675 775 656 756 686 786 80 818 2017 40 875 2055 856 2046 886 90 918 975 956 986 100 1018 1075 1056 1086 2088 2088 2104 2085 2128 2068 2133 2068 2080 2061 2075 2061 ±10 / ±5 +20 / +10 +20 / +10 +20 / +10 ±10 / ±5 +10 / +5 ±10 / ±5 ±10 / ±5 ±10 / ±5 ±10 / ±5 ±10 / ±5 ±10 / ±5 ±10 / ±5 139

Door sizes tables Polish Standard (PN) Exterior doors Table 4 Size S S H S D S S 0 H 0 S B H B S Z H Z T S/W GDANSK 80 807 2007 45 865 2070 843 2058 893 2083 ±10 / ±5 GDANSK, SZCZECIN, TORUN 90 908 2007 45 965 2070 943 2058 993 2083 ±10 / ±5 GDYNIA, WROCLAW 90 982 2049 68 1090 2120 1060 2100 ±10 / ±10 GDYNIA +1 side transom 30 GDYNIA + 2 side transoms 30 90 +30 30+90 +30 982 2049 68 1435 2120 1404 2100 ±10 / ±10 982 2049 68 1780 2120 1746 2100 ±10 / ±10 GDYNIA, WROCŁAW 100 1082 2049 68 1190 2120 1160 2100 ±10 / ±10 GDYNIA + 1 side transom 30 GDYNIA + 2 side transoms 30 ROMA doors Premium single ROMA doors Premium double ROMA doors Standard single 100 +30 30+100 +30 1082 2049 68 1535 2120 1504 2100 ±10 / ±10 1082 2049 68 1880 2120 1846 2100 ±10 / ±10 80 868 940 920 950 90 968 2030 56 1040 2075 1020 2066 1050 100 1068 1140 1120 1150 130 1427* 1500 1479 1509 140 1527* 1600 1579 1609 150 1627* 1700 1679 1709 160 1727* 1800 1779 1809 2030 56 2075 2066 170 1827* 1900 1879 1909 180 1927* 2000 1979 2009 190 2027* 2100 2079 2109 200 2127* 2200 2179 2209 80 868 900 880 930 90 968 2030 45 1000 2055 980 2046 1030 100 1068 1100 1080 1130 130 1427* 1460 1479 1489 140 1527* 1560 1579 1589 150 1627* 1660 1679 1689 ROMA doors Standard 160 1727* 1760 1779 1789 double 2030 45 2055 2046 170 1827* 1860 1879 1889 180 1927* 1960 1979 1989 190 2027* 2060 2079 2089 200 2127* 2160 2179 2189 *The total width of the active and passive door leaves. 2081 ±10/±5 2081 ±10/±5 2071 ±10/±5 2071 ±10/±5 Wardrobe doors Table 5 OXFORD GENEVA Size S S H S D S S 0 H 0 S B H B S Z H Z T S/W 60 600 675 652 762 70 700 775 752 862 80 800 875 852 962 90 900 975 952 1062 2005 30 2090 2075 120 1200 1275 1260 1370 2130 140 1400 1475 1460 1570 160 1600 1675 1660 1770 180 1800 1875 1860 1970 +20 / +10 140

Door sizes tables Polish Standard (PN) Sliding door systems, Folding doors Table 6 METAL sliding door system (for masonry walls) METAL sliding door system (for plasterboard walls) PORTA sliding door system ALU sliding door system ALPHA system BETA system OMEGA system Size S S H S D S S 0 H 0 H Z M S M G B G T S/W 60 644 670 1310 70 744 770 1510 80 844 2030 40 870 2055 2114 1710 82 58 90 944 970 1910 100 1044 1070 2110 60 70 644 744 685 785 1310 1510 80 844 2030 40 885 2055 2114 1710 90 944 985 1910 100 1044 1085 2110 60 70 644 744 680 780 1363 1563 80 844 2030 40 880 2060 2119 1763 90 944 980 1963 100 1044 1080 2143 82 58 98 60 60 70 744 844 680 780 1448 1648 80 944 880 1848 90 1044 2030 40 980 2060 2114 2048 62 130 2 x 744 1420 2877 150 2 x 844 1620 3277 170 2 x 944 1820 3677 Size S S H S D S S 0 H 0 H Z S Z M G B G T S/W 60 70 644 744 680 780 746 846 80 844 2003 40 880 2060 2088 946 90 944 980 1046 100 1044 1080 1146 60 588 680 746 70 688 780 846 1990 40 2070 2088 80 788 880 946 90 888 980 1046 2 x 60 2 x 70 644 744 1370 1570 1429 1629 2 x 80 844 1956 30 1770 2060 2088 1829 2 x 90 944 1970 2029 2 x 100 1044 2170 2229 ±10 / ±5 +10 / +5 +20 / +10 +20 / +10 +20 / +10 +20 / +10 +20 / +10 COMPACT sliding system single COMPACT sliding door system double Size S S H S D S S * 0 H * 0 S B H B S Z H Z T S/W S C H C 60 644 670 664 753 1355 70 744 770 764 853 1555 80 844 2030 40 870 2075 864 2040 953 2090 1755 2128 90 944 970 964 1053 1955 100 1044 1070 1064 1153 2155 2 x 60 644 1290 1278 1378 2613 2 x 70 744 1490 1478 1578 3013 2 x 80 844 2030 40 1690 2075 1678 2040 1778 2090 3413 2128 2 x 90 944 1890 1878 1978 3813 2 x 100 1044 2090 2078 2178 4213 * For COMPACT sliding door system sizes S 0 H O mean size of wall opening ready for wooden door frame setting. +10 /+5 +10 /+5 Notes: Dimension tolerance in accordance with the Polish Standard (PN): up to 1 m: ± 1 mm, above 1 m: ± 2 mm. To work out the size So of double-leaf doors, dimensions given in the table must be added to the width of the second leaf or side panel (S S dimension). To work out the width of double-leaf doors (S S, S B, S Z ), dimensions given in the table must be added to the width of the second leaf or extension (S S dimension), and then reduced by 10 mm. Extensions available in natural veneer finish are offered as the 40 width, where S S =444, H S =2030. The frames are designed for installation on a finished, ready to use floor. Metal frames may be ordered 30 mm longer, to dip the ends in the floor concrete. In such a case, the H 0 and H Z dimensions must be increased by 30 mm (level -30 ). The inside door leaf dimension given in the table applies both to rebate and non-rebate leaves. Porta SYSTEM integrated with an upper light, dimensions H 0, H B i H Z +302 mm. While using the PROJECT frame, the wall opening must be larger - S 0 by 25 mm and H 0 by 15 mm (results tolerance ± 10 mm / ± 5 mm). 141

Interior doors Table 1.1 with door frames: Minimax 60 mm Minimax 100 mm Rondo 100 mm MDF In natural veneer with adjustable Porta SYSTEM door frame with adjustable PRESTIGE door frame Size S S H S D S S 0 H 0 S B H B S Z H Z T S/W 60 648/610 715/680 694/657 804/767 70 748/735 815/805 794/782 904/892 80 848/860 1985 40 915/930 2030 894/907 2015 1004/1017 2070 90 948/985 1015/1055 994/1032 1104/1142 100 1048/ 1115/ 1094/ 1204/ 60 70 648/610 748/735 685/650 785/775 650/613 750/738 750/713 850/838 80 848/860 1985 40 885/900 2015 850/863 1993 950/963 90 948/985 985/1025 950/988 1050/1088 100 1048/ 1085 / 1050/ 1150/ 60 70 648/610 748/735 715/680 815/805 694/657 794/782 822/785 922/910 80 848/860 1985 40 915/930 2030 894/907 2015 1022/1035 90 948/985 1015/1055 994/1032 1122/1160 100 1048/ 1115/ 1094/ 1222/ Interior doors Table 2.1 with small angle-bar metal door frame with large angle-bar metal door frame (for masonry walls) with Adjustable door frame AGATE, OPAL, QUARTZ, GRANITE Czech and Slovak Standard ČSN+STN)*/ German Standard (DIN) Size S S H S D S S 0 H 0 S B H B S Z H Z T S/W 60 648/610 654/616 633/595 690/652 70 748/735 754/741 733/720 790/777 80 848/860 1985 40 854/866 2000 833/845 1988 890/902 2016 90 948/985 954/991 933/970 990/1027 100 1048/ 1054/ 1033/ 1090/ 60 70 648/610 748/735 680/640 780/765 660/622 760/747 690/652 790/777 80 848/860 1985 40 880/890 2010 860/872 2001 890/902 90 948/985 980/1015 960/997 990/1027 100 1048/ 1080/ 1060/ 1090/ 60 70 648/610 748/735 704/665 804/790 684/646 784/771 720/682 820/807 80 848/860 1985 40 904/915 2025 984/896 2013 920/932 90 948/985 1004/1040 1084/1021 1020/1057 100 1048/ 1104/ 1184/ 1120/ Interior entrance doors Table 3.1 Size S S H S D S S 0 H 0 S B H B S Z H Z T S/W 80 848/860 40/44 880/890 860/872 910/922 90 948/985 1985 44/48 980/1015 2010 960/997 2001 1010/1047 100 1048/ 45/47 1080/ 1060/ 1110/ Sliding door systems Table 4.1 2043 2079 2016 2031 2026 +20 / +10 +20 / +10 +20 / +10 ±10 / ±5 ±10 / ±5 10 / 5 ±10 / ±5 PORTA sliding door system ALPHA system BETA system OMEGA system Size S S H S D S S 0 H 0 H Z M S M G B G T S/W 60 648 685 1363 70 748 785 1563 80 848 1985 40 885 2015 2074 1763 98 60 90 948 985 1963 100 1048 1085 2143 Size S S H S D S S 0 H 0 H Z S Z M s B G T S/W 60 648/610 685/650 750/713 70 748/735 785/775 850/838 80 848/860 1952 40 885/900 2015 2043 950/963 90 948/985 985/1025 1050/1088 100 1048/ 1085/ 1150/ 60 592/554 685/650 750/713 70 692/680 785/775 850/838 1945 40 2025 2043 80 792/806 885/900 950/963 90 892/930 985/1025 1050/1088 2 x 60 648/610 1370/1275 1429/1337 2 x 70 748/735 1570/1525 1629/1587 2 x 80 848/860 1911 30 1770/1775 2015 2043 1829/1837 2 x 90 948/985 1970/2025 2029/2087 2 x 100 1048/ 2170/ 2229/ +20 / +10 +20 / +10 +20 / +10 +20 / +10 COMPACT sliding system single COMPACT sliding door system double Size S S H S D S S ** 0 H ** 0 H Z S C H C B G T S/W 60 644 670 1355 70 744 770 1555 80 844 1985 40 870 2030 2045 1755 2083 90 944 970 1955 100 1044 1070 2155 2x 50 644 1288 2613 2x 70 744 1488 3013 2x 80 844 1985 40 1688 2030 2045 3413 2083 2x 90 944 1888 3813 2x 100 1044 2088 4213 Note: *two (DIN) or three (CN) standard pintle hinges for interior doors in accessories included in leaf price; **opening in cassette ready for door frame setting. DOOR LEAVES: MINIMAX, with APPLICATIONS, Portadecor, CPL or PVC veneered, SLOT-MILLED, OPEN-WORK Hungarian standard (HUN) Interior doors Table 5.1 +10 / +5 +10 / +5 142 with adjustable Porta SYSTEM door frame Size S S H S D S S 0 H 0 S B H B S Z H Z T S/W 70 715 750 717 817 80 865 2075 40 900 2100 867 2083 967 2133 90 965 1000 967 1067 +20 / +10

residential building ngs PORTA CONTRACT Specifi c Non-standard offer non-st stan da rd buildings Porta Doors means not only a wide range of standard products, but also custom doors matched to individual needs of our Customers. Custom fi nishing, design or size in combination with a number of technical solutions, with the highest possible functional parameters such as burglar-proofness, acoustics, fi re-resistance, smoke-tightness offered residences within our certifi cates and tests, enabled use of doors in prestigious investment structures. Our doors are used in residential buildings, offi ces, schools, markets, restaurants, hotels, resorts, dormitories, hospitals, health centers, laboratories, sanatorium, airports, and other public places. Quality of used materials and precision of workmanship cabinets identifi es PORTA. Within the scope of technological capabilities, specially assigned unit- Porta Contract Department will prepare an offer according to expectations specifi ed in your query. offifi ces FIRE-RESISTANCE hote ls, resorts SMOKE-TIGHTNESS SOUND-PROOFNESS swimming poo ools BURGLAR-PROOFNESS All inquirie ies rega rdin ing the no n- stan anda dard offer pl ease conta ct the Contract De partment: ph one: (+4 8) 58 677878 140 40, e-ma il: kont ra kt @por ta.c.com.p.pl airports 143

AUTHORISED DISTRIBUTORS AZERBAIJAN Baku MARKHAL-97, tel./fax +994125102898, porta_doors@box.az BELARUS Мinsk BELPRAKTIKA, tel.: +375 17 297 94 30, 297 94 35, 29 797 94 30, comerts@belpraktika.com, www.belpraktika.com Мinsk ERILANT, tel.: +375 172 04 04 82, +375 172 56 11 12, +375 172 04 68 12, erilant@rambler.ru, sales@erilant.by, www.erilant.by Minsk EXPO HOUSE GRAD-ZHDANOVICHI, tel.: +375 172 89 64 06, 289 66 07, porta_kss@mail.ru, www.kss-by.com Мinsk WINDOR, tel.: +375 172 89 64 06, 289 66 07, 286 56 61, porta_kss@mail.ru, www.kss-by.com BULGARIA Burgas 501doors showrooms of Ralica Furniture Houses PLC; 8000 Burgas 15 Sofroniy Str.; tel.: +359 56 841870; burgas_mebeli@isu.bg; www.501doors.com Pleven Temira Ltd., #1, Zdravetz Str.; tel.: +359 64 803 457; mobile: +359 888 154 562; fax: +359 64 803 457; pleven@temira.com, www.temira.com Plovdiv Archcenter-A LTD BAUZENTRUM; bul. Vasil Aprilov 124A; tel.: +359 32 96 95 94; mob.: +359 886 79 79 12; porta@bauzentrum.bg Sofia 501doors showrooms of Ralica Furniture Houses PLC; 1000 Sofia, 2 Arsenalski Blvd., City Centre Sofia Mall, Level -2; tel.: +359 2 9635588; ccs@isu.bg; www.501doors.com Sofia Archcenter-A LTD BAUZENTRUM; bul. Tsarigradsko shose 319; tel.: +359 2 979 45 60; mob.: +359 885 068 064; porta@bauzentrum.bg Sofia Arcoma Bulgaria LTD, tel.: 02/483 01 54, +3592 4830154, +359 886130694, +359 885934497 fax: +3592 9521014, info@arcoma-bg.com, www.arcoma-bg.com, Pencho Slaveikov Blvd 35, 1463 Sofia Sofia Stroitelni Sistemi Nitera Ltd., tel.: 02/925 22 75, nitera_doors@niteragroup.com, www.niteragroup.com Sofia Temira Ltd., #3, 5007, NPZ Iskar Sever; tel.: +359 2 973 28 81; +359 2 973 26 83; +359 2 978 11 09; mobile: +359 888 150 754; +359 889 205 332; fax: +359 2 973 27 76; vrati@temira.com; supply@temira.com; www.temira.com Targovishte Temira Ltd.; Promishlena zona; tel: +359 601 622 14; mobile : +359 886 301 766; fax: +359 601 622 14; temira_targovishte@abv.bg; www.temira.com Varna 501doors showrooms of Ralica Furniture Houses PLC; 9000 Varna, 186 Vladislav Blvd., Mall Varna, Level 2; tel.: +359 52 641020, +359 52 556633; 501doors@isu.bg; www.501doors.com Veliko Tarnovo 501doors showrooms of Ralica Furniture Houses PLC; 5000 Veliko Tarnovo, 18 Oborishte Str., Central Mall, Level 2; tel.: +359 62 606000; +359 62 646400; mkr-vt@isu.bg; www.501doors.com CROATIA Zadar Dom-Artis, tel.: +385 23 27 44 27, info@domartis.hr, www.domartis.hr CYPRUS Limassol GRALDA TRADING LTD., tel.: +357 25337363, gralda@cytanet.com.cy, www.gralda.com CZECH REBUBLIC Holovousy SVARTES, s.r.o., tel.: +420 493 620 210, info@svartes.cz, www.svartes.cz Mladá Boleslav MB INTERIERY, Michal Brzobohatý, tel.:+420 326 726 333, klika@mbinteriery.cz, www.mbinteriery.cz Planá nad Lužnicí ATEX PLANÁ, s.r.o., tel.: +420 381291318, info@atex-plana.cz, www.atex-plana.cz Praha DARTE, s.r.o., tel.: +420 777 777 790, info@darte.cz, www.darte.cz Praha ROVEL CZ, s.r.o., tel.: +420 234 676 401, info@rovelcz.cz, www.rovelcz.cz Praha WOODCOTE CZ, a.s., tel.: +420 226 539 146/147, infoporta@woodcote.cz, www.woodcote.cz ESTONIA Tallinn MOSTORIONA OU, tel.: +372 7122395, porta@doors.ee, www.doors.ee FRANCE Beauvoir-Sur-Mer ENTERPRISE TUÉ, tel.: +33 0251938989, ttue@tue.fr, www.tue.fr GERMANY Düsseldorf PR BAUELEMENTE OHG, tel.: +49 4231 94312, info@tuerenstudio.eu, www.tuerenstudio.eu Verden/Aller FENSTER BÖRSE VERDEN GmbH, tel.: +49 4231 98 580, info@zimmertueren24.de, www.zimmertueren24.de GREECE Agent of Porta DOORS MAKATSORIS Co., tel.: + 30/801 11 76782, fax.: +30/2106664980, info@porta.com.gr, www.porta.com.gr Dhmos Koropiou Attiki CLASSICTHERM/ Kakoulis Dimitrios, tel.: +30/22910 78930, fax.: +30/22910 78931, dkak@porta.com.gr Dhmos Crete Heraklio GOGONIDAKIS NIKOLAOS SA, tel.: +30/283 106 1326, fax.: +30/ 283 106 1826, portaxr@porta.com. gr, www.gogonidakis.page.tl Dhmos Nikaias Piraeus Attiki SIDELCO SYSTEMS, tel.: +30/2104904451, fax.: +30/2104908358, sidelco@porta.com.gr, www.sidelco.gr Dhmos Chalkidas Evia Central Greece VIDALIS BROS O.E., tel.: +30/2221084172, +30/2221084049, mvid@porta.com.gr Dhmos Moshato KASIMATIS GIORGOS CO., tel.: +30/210 9480450, fax.: +30/210 9480319, gkasim@porta.com.gr, www.portadoors.net Dhmos N. Makrhs Attiki CHRISTINA MOUCHTARI CO., tel.: +30/229 406 9080, fax.:+30/229 406 9082, delatolas@porta.com.gr Dhmos Palini, Gerakas, Melisia-Brilisia Attiki KASIMATIS GIORGOS CO., tel.: +30/210 810 2032, fax.: +30/210 609 6368, gkasim@porta.com.gr, www.portadoors.net Technical Doors Hellas, MIPECO TEXNIKH EMPORIKH LTD., tel.: +30/210 664 4611, fax.: +30/210 664 3825, mipeco@porta.com.gr, www.mipeco.gr Dhmos Anthoysas Spata Glyka Nera Pallini, NTIKAS GEORGIOS CO, tel.: +30/210 663 5587, fax.: +30/210 663 0445, ntikas@porta.com.gr Dhmos Ioanninon Epirus VANGELIS DIMOS, tel.: +30/265 106 6011, dvag@porta.com.gr Dhmos Pyrgou Hleia XSILIA BYTHOULKAS AEBE, tel.: +30/2621020075, pyrgos@porta.com.gr, portadoorspyrgos@hotmail.com HUNGARY Budapest ALLhouse Kft., tel.: +36/ 1 786 9090, allhouse@allhouse.hu, www.allhouse.hu Budapest TRIO Ajtó Kft. Showroom 1061, Király u. 106, tel.: 06 1/ 413 6153, 06 1/ 321 3428, fax: 06 1/ 342 9843, bp@trioajto.hu, www.trioajto.hu Budapest 1158, Késmárk u. 11-13. WOODCOTE HUNGARY Kft., tel.: +36/1 309 73 66; fax: +36/1 309 73 69; porta@woodcote.hu, www.woodcote.hu Budapest 1095, Kvassay Jenő út 1. WOODCOTE HUNGARY Kft. tel.: +36/1 456 1010; fax: +36/1 456 1015; info@woodcote.hu, www.woodcote.hu Debrecen, ALLhouse Kft., tel.:+ 36/ 20 938 4831,allhouse@allhouse.hu, www.allhouse.hu Mosonmagyaróvár TRIO Ajtó Kft. Headquarters and Showroom 9200, Szent István Király u. 80; tel.: 0036/96 577 330 fax: 0036/96 577 336; centrum@trioajto.hu, movar@trioajto.hu; www.trioajto.hu Mosonmagyaróvár 9200, Gabona rkp. 16. WOODCOTE HUNGARY Kft., tel.: +36/ 96 555 558; fax: +36/96 555 559; andrea.novak@woodcote.hu; www.woodcote.hu Nyíregyháza Open Doors Kft - Showroom - 4400, Martinovics tér. 2; open-doors@open-doors.hu; tel (showroom): +3620252-4041; tel/fax: +3642/784-959; www.open-doors.hu Pécs, SZINKRÓN Kft., tel.: +36/ 72 510 930, +36/ 72 512 710, szinkron@szinkron.hu, www.szinkron.hu Szeged 6278, Fonógyári út 9. WOODCOTE HUNGARY Kft., tel.: +36/ 62 543 703 fax: +36/62 543 707, csaba.bokor@woodcote.hu, www.woodcote.hu Újudvar TRIO Ajtó Kft. - Warehouse - 9200, Esze Tamás u. 15. LATVIA Riga AKB BŪVE, tel.: +371 7465137, akb@akb-projekts.lv, www.akb-projekts.lv Riga BUVLUKSS, tel.: +371 67573565, salons@buvlukss.lv, www.buvlukss.lv Daugavpils BUVLUKSS, tel.: +371 65432205, buvlukss@inbox.lv, www.buvlukss.lv Rēzeknē BUVLUKSS, tel.: +371 64605661, salons.rezekne@buvlukss.lv, www.buvlukss.lv

Porta veneers classification AUTHORISED DISTRIBUTORS Especially for our Clients we have developed a classification of finishes based on the European standards taking into account external factors which directly affect the door surface durability. The classification includes the following factors affecting the doors and veneers in everyday use: Abrasion Cleaning agents Humidity Daylight it is an inherent factor to any door usage. The doors are exposed to many knocks and scrapes associated with passage of people whose hands are often busy with documents or personal belongings and do not allow the use of the doors properly. The leaf surface must resist children games, and the pets do not spare the doors when waiting for their masters. both house and office cleaning work requires the use of cleaning agents which are not neutral for the surface durability. high air humidity affects veneer directly and the veneer resistance to this factor guarantees stability of the shape and uniformity of door surface throughout the whole door life time. this factor affects the changes of colour over a long period of use. We have tested for you all types of veneers and their reaction to daylight during many year operation and we may say with pride that our methods of door finishing give very good results throughout their whole lifetime. Porta classification takes onto account six groups which include all kinds of veneer used for Porta door ranges. Finishing quality, durability, aesthetics all of them are specified for each group and we hope that our classification will help make optimum choice and allow you to take best decision. Resistance to weather Buildings, residential spaces with a wide range of uses With each presented product information on veneer used is provided: Hotels, offi ces, public buildings The diagram shows particular locations suggested by Porta for doors with different types of veneer. ECONOMIC Interior water-based varnish a class which is an ideal combination of quality and price. STANDARD Interior acrylic paint Porta basic class it ensures long service life for the household. STANDARD PLUS Veneers: Portadecor, decor Minimax extended Standard class with improved parameters of resistance to abrasion and humidity. PREMIUM Veneers: Portadur, natural standard, natural select, PVC, acrylic paint, water-based varnish (exterior) a class with the highest average parameters, which guarantee high functional value and are designed for use in residential buildings and offices. PROFESSIONAL Veneers: HQ CPL, polyester paint, PVC laminated steel sheet a class which combines functionality and elegance wherever the doors are exposed to a prolonged weather impact they are suggested for hotels, public buildings and offices. EXTREME Veneers: HPL, acidproof stainless steel a class with parameters which guarantee protection during intensive use of the models with this type of veneer it is designed for places where crowds of people pass every day. High traffi c places ECONOMIC STANDARD STANDARD PLUS PREMIUM PROFESSIONAL EXTREME Class LITHUANIA Vilnius DURYS LUX Salonas, UAB MORITA, tel.: +370 52324488, info@duryslux.lt, www.duryslux.lt Vilnius UAB FAUGA, tel.: +370 52043303, info@durucentras.lt, www.durucentras.lt Vilnius UAB MORITA, tel.: +370 52788680, salonas@morita.lt, www.morita.lt Marijampole UAB MORITA, tel.: +370 34397516, centras@morita.lt, www.morita.lt Kaunas UAB MORITA, tel.: +370 37351597, kaunosalonas@morita.lt, www.morita.lt MACEDONIA Skopije Duo IMPEX, tel.: +389 70 245 527, duoimpex@yahoo.com MALTA Birkirkara QUADRA, tel.: +356 79483848, info@quadra.com.mt, www.quadra.com.mt OMAN Muscat-South Alkhuwair, New Home For World Projects LLC, 0096.896.381.976 ROMANIA Alba-Iulia FLORIDA CONSTRUCT, 0258.823.333, 0788.823.333, floridaconstruct@yahoo.com, www.floridaconstruct.ro Arad GREEN SOLUTIONS, 0257.274.742, www.greensolution.ro Bacău DEDEMAN, 0234.206.281, 0744.577.128, comercial@dedeman.ro, www.dedeman.ro Bacău DURAS, 0234 511 700, office@durasbc.ro Bacău SEPHARD CASA, 0040.34.31.01.05, catalinpuscalau@sephard.ro Bistriţa FRANCESCA COMSERV SRL, 0263.234.115, 0722.555.661, francescasrl_bn@yahoo.com Bucureşti ARABESQUE, 031.405.65.36, 0747.493.318, nicoleta.antoniu@arabesque.ro, www.arabesque.ro Bucureşti CHEMICALCOM ADYA, 021.369.57.58, 0724.311.437, porta-doors@adya.ro, www.adya.ro Bucureşti FAR EST CONSTRUCT, 021.350.41.73, 0726.711.355, usi_porta@farest.ro, www.farest.ro Bucureşti REI PRODIMEX, 021.410.87.88, 0726.388.601, office@reiambient.ro, www.reiambient.ro Buzău PICO DO PRODEXIM, +40 238 723 188, picodoprodexim@yahoo.com Caransebes HRISTOGAMMA, 0255.512.765, 0720.440.169, info@hristogamma.ro Cluj AX PERPETUUM, 0264.424.842, 0740.018.047, marian.manases@perpetuum.ro, www.perpetuum.ro Cluj WOODCOTE ROMANIA, 0264.456.128, 0727.734.697, www.woodcote.ro Cluj INDY GO, 0733.035.144, 0264.265.644, office@indygo.ro, www.indygo.ro Constanta CASA BAMBUS, 0341.400.404, constanta@casabambus.ro Constanta FIVE HOLDING, 0733.001.932, lux@five-brick.ro Craiova CASA NOASTRA, 0251.429.532, 0720.700.680, nicusor.istudora@casanoastra.ro, www.casanoastra.ro Craiova EUROCASA,0753.100.251, eurocasa.craiova@artelecom.net Deva QUASAR INDUSTRIES, 0254.206.294, 0724.383.012, alexandru.iobb@quasar.ro, www.quasar.ro Deva SIMAL EXIM,0254.233.170, 0720.222.630, simal@smart.ro, www.simal.ro Galati ROMDECOR, 0236.470.407, romdecorgalati@yahoo.com, www.rom-decor.ro Mures TERMOPOR INTERNATIONAL, 0733.932.683, suciuioan66@yahoo.com Oradea EUROBAC ROMANIA, 0259.415.811, 0744.778.779, office@eurobac.ro, www.eurobac.ro Oradea PROGES, 0259.406.290, 0746.046.301, office@proges.ro, www.proges.ro Piatra Neamt IMPACT DISTRIBUTION, +40 233 211 000, comercial@impact.com.ro Satu-Mare Bizmann, 0726.376.984, oszkar.bizmann@piaviss.ro Sibiu AVI & F, 0269.248.080, 0727.200.102, avi_f@rdslink.ro, www.avi-f.ro Suceava REVINE IMPEX, 0767.563.235, office@revine.ro, Targu Mures Timexim Import Export, 0744.796.442, office@ceramicaprestige.ro Timisoara GESO GROUP, 0740.580.599, gesogroup@clicknet.ro Turda AGROLIV, 0264.314.501, 0729.636.342, agroliv@yahoo.com Zalau MULTICOM, 0260.606.122; 0260.606.123, multicom_zalau@yahoo.com RUSSIA Kaliningrad PARTNERS, tel. +7 911 470 80 62, partners39@gmail.com Moscow ELITEL, tel. +7 495 779 12 76, dveriporta@mtu-net.ru, www.elitel.ru Moscow ROSPROOF, tel. +7 495 933 75 63, dmitry@rosproof.ru, www.rosproof.ru St-Petersburg SMART-COMPANY, tel. +7 812 644 41 60 j.gruzdova@smart-company.ru, www.smart-company.ru Sochi INVESTA, tel. +7 8622 68 04 24, info-investa@mail.ru Smolensk VEGA AVANGARD, tel. +7 4812 66 07 03, 38 75 24, info@vegaavangard.com, www.vegadveri.ru UKRAINE Kiev PORTA KMI UKRAINA Ltd, tel.: +38 044 566 04 24, fax +38 044 576 42 20 info@porta.com.pl, www.porta.com.pl SERBIA Novi Belgrad D.O.O <<PORTA DOORS>> BEOGRAD, tel.: +381113089909, +381113089909, +381113089910, porta-bg@eunet.rs, www.portadoors.rs SLOVAKIA Bratislava DVERE.EU, s.r.o., tel.: +421 905 277 505, dvere@dvere.eu, www.dvere.eu Bratislava WOODCOTE Slovakia, s.r.o., tel.: +421 249 105 041, woodcote@woodcote.sk, www.woodcote.sk Šaľa INTERIÉR EXTERIÉR, s.r.o., tel.: +421 31 770 8815, info@interierexterier.sk, www.interierexterier.sk SCOTLAND Edinburgh MJ IMPROVEMENTS (Professional Suppliers) Ltd, tel.: +44 131-337-7027, mjimprovements@btconnect.com, www.mjimprovements.com SPAIN Calvia (Bugadellas) ECCOWIN SERVICIOS REUNIDOS SL, tel.: +34 971696434, info@eccowin.com, www.eccowin.com Santa Ponica (Baleares) MARTERM MALLORCA S.L., tel.: +34 971693262, daniel@marterm.com SWITZERLAND Arbedo Svizzera INTONEDIL S.A., tel.: + 41 918634711, intonedil@bluewin.ch PORTA KMI POLAND Sp. z o.o. reserve the rights to change without previous information the technology of production and construction of their products. Any information provided in the catalogue shall not be considered an offer in the meaning of the Civil Code.

PORTA KMI Poland Sp. z o.o. Szkolna str. 26, 84-239 Bolszewo, Poland phone: +48/58 677 81 00, fax: +48/58 677 81 99, e-mail info@porta.com.pl PORTA s factories PORTA dealers network www.portadoors.com Druk PORTA 299/08. Zlecenie 2009-2677-MP Data 23.02.2010

Porta veneers classification AUTHORISED DISTRIBUTORS Especially for our Clients we have developed a classification of finishes based on the European standards taking into account external factors which directly affect the door surface durability. The classification includes the following factors affecting the doors and veneers in everyday use: Abrasion Cleaning agents Humidity Daylight it is an inherent factor to any door usage. The doors are exposed to many knocks and scrapes associated with passage of people whose hands are often busy with documents or personal belongings and do not allow the use of the doors properly. The leaf surface must resist children games, and the pets do not spare the doors when waiting for their masters. both house and office cleaning work requires the use of cleaning agents which are not neutral for the surface durability. high air humidity affects veneer directly and the veneer resistance to this factor guarantees stability of the shape and uniformity of door surface throughout the whole door life time. this factor affects the changes of colour over a long period of use. We have tested for you all types of veneers and their reaction to daylight during many year operation and we may say with pride that our methods of door finishing give very good results throughout their whole lifetime. Porta classification takes onto account six groups which include all kinds of veneer used for Porta door ranges. Finishing quality, durability, aesthetics all of them are specified for each group and we hope that our classification will help make optimum choice and allow you to take best decision. Resistance to weather Buildings, residential spaces with a wide range of uses With each presented product information on veneer used is provided: Hotels, offi ces, public buildings The diagram shows particular locations suggested by Porta for doors with different types of veneer. ECONOMIC Interior water-based varnish a class which is an ideal combination of quality and price. STANDARD Interior acrylic paint Porta basic class it ensures long service life for the household. STANDARD PLUS Veneers: Portadecor, decor Minimax extended Standard class with improved parameters of resistance to abrasion and humidity. PREMIUM Veneers: Portadur, natural standard, natural select, PVC, acrylic paint, water-based varnish (exterior) a class with the highest average parameters, which guarantee high functional value and are designed for use in residential buildings and offices. PROFESSIONAL Veneers: HQ CPL, polyester paint, PVC laminated steel sheet a class which combines functionality and elegance wherever the doors are exposed to a prolonged weather impact they are suggested for hotels, public buildings and offices. EXTREME Veneers: HPL, acidproof stainless steel a class with parameters which guarantee protection during intensive use of the models with this type of veneer it is designed for places where crowds of people pass every day. High traffi c places ECONOMIC STANDARD STANDARD PLUS PREMIUM PROFESSIONAL EXTREME Class LITHUANIA Vilnius DURYS LUX Salonas, UAB MORITA, tel.: +370 52324488, info@duryslux.lt, www.duryslux.lt Vilnius UAB FAUGA, tel.: +370 52043303, info@durucentras.lt, www.durucentras.lt Vilnius UAB MORITA, tel.: +370 52788680, salonas@morita.lt, www.morita.lt Marijampole UAB MORITA, tel.: +370 34397516, centras@morita.lt, www.morita.lt Kaunas UAB MORITA, tel.: +370 37351597, kaunosalonas@morita.lt, www.morita.lt MACEDONIA Skopije Duo IMPEX, tel.: +389 70 245 527, duoimpex@yahoo.com MALTA Birkirkara QUADRA, tel.: +356 79483848, info@quadra.com.mt, www.quadra.com.mt OMAN Muscat-South Alkhuwair, New Home For World Projects LLC, 0096.896.381.976 ROMANIA Alba-Iulia FLORIDA CONSTRUCT, 0258.823.333, 0788.823.333, floridaconstruct@yahoo.com, www.floridaconstruct.ro Arad GREEN SOLUTIONS, 0257.274.742, www.greensolution.ro Bacău DEDEMAN, 0234.206.281, 0744.577.128, comercial@dedeman.ro, www.dedeman.ro Bacău DURAS, 0234 511 700, office@durasbc.ro Bacău SEPHARD CASA, 0040.34.31.01.05, catalinpuscalau@sephard.ro Bistriţa FRANCESCA COMSERV SRL, 0263.234.115, 0722.555.661, francescasrl_bn@yahoo.com Bucureşti ARABESQUE, 031.405.65.36, 0747.493.318, nicoleta.antoniu@arabesque.ro, www.arabesque.ro Bucureşti CHEMICALCOM ADYA, 021.369.57.58, 0724.311.437, porta-doors@adya.ro, www.adya.ro Bucureşti FAR EST CONSTRUCT, 021.350.41.73, 0726.711.355, usi_porta@farest.ro, www.farest.ro Bucureşti REI PRODIMEX, 021.410.87.88, 0726.388.601, office@reiambient.ro, www.reiambient.ro Buzău PICO DO PRODEXIM, +40 238 723 188, picodoprodexim@yahoo.com Caransebes HRISTOGAMMA, 0255.512.765, 0720.440.169, info@hristogamma.ro Cluj AX PERPETUUM, 0264.424.842, 0740.018.047, marian.manases@perpetuum.ro, www.perpetuum.ro Cluj WOODCOTE ROMANIA, 0264.456.128, 0727.734.697, www.woodcote.ro Cluj INDY GO, 0733.035.144, 0264.265.644, office@indygo.ro, www.indygo.ro Constanta CASA BAMBUS, 0341.400.404, constanta@casabambus.ro Constanta FIVE HOLDING, 0733.001.932, lux@five-brick.ro Craiova CASA NOASTRA, 0251.429.532, 0720.700.680, nicusor.istudora@casanoastra.ro, www.casanoastra.ro Craiova EUROCASA,0753.100.251, eurocasa.craiova@artelecom.net Deva QUASAR INDUSTRIES, 0254.206.294, 0724.383.012, alexandru.iobb@quasar.ro, www.quasar.ro Deva SIMAL EXIM,0254.233.170, 0720.222.630, simal@smart.ro, www.simal.ro Galati ROMDECOR, 0236.470.407, romdecorgalati@yahoo.com, www.rom-decor.ro Mures TERMOPOR INTERNATIONAL, 0733.932.683, suciuioan66@yahoo.com Oradea EUROBAC ROMANIA, 0259.415.811, 0744.778.779, office@eurobac.ro, www.eurobac.ro Oradea PROGES, 0259.406.290, 0746.046.301, office@proges.ro, www.proges.ro Piatra Neamt IMPACT DISTRIBUTION, +40 233 211 000, comercial@impact.com.ro Satu-Mare Bizmann, 0726.376.984, oszkar.bizmann@piaviss.ro Sibiu AVI & F, 0269.248.080, 0727.200.102, avi_f@rdslink.ro, www.avi-f.ro Suceava REVINE IMPEX, 0767.563.235, office@revine.ro, Targu Mures Timexim Import Export, 0744.796.442, office@ceramicaprestige.ro Timisoara GESO GROUP, 0740.580.599, gesogroup@clicknet.ro Turda AGROLIV, 0264.314.501, 0729.636.342, agroliv@yahoo.com Zalau MULTICOM, 0260.606.122; 0260.606.123, multicom_zalau@yahoo.com RUSSIA Kaliningrad PARTNERS, tel. +7 911 470 80 62, partners39@gmail.com Moscow ELITEL, tel. +7 495 779 12 76, dveriporta@mtu-net.ru, www.elitel.ru Moscow ROSPROOF, tel. +7 495 933 75 63, dmitry@rosproof.ru, www.rosproof.ru St-Petersburg SMART-COMPANY, tel. +7 812 644 41 60 j.gruzdova@smart-company.ru, www.smart-company.ru Sochi INVESTA, tel. +7 8622 68 04 24, info-investa@mail.ru Smolensk VEGA AVANGARD, tel. +7 4812 66 07 03, 38 75 24, info@vegaavangard.com, www.vegadveri.ru UKRAINE Kiev PORTA KMI UKRAINA Ltd, tel.: +38 044 566 04 24, fax +38 044 576 42 20 info@porta.com.pl, www.porta.com.pl SERBIA Novi Belgrad D.O.O <<PORTA DOORS>> BEOGRAD, tel.: +381113089909, +381113089909, +381113089910, porta-bg@eunet.rs, www.portadoors.rs SLOVAKIA Bratislava DVERE.EU, s.r.o., tel.: +421 905 277 505, dvere@dvere.eu, www.dvere.eu Bratislava WOODCOTE Slovakia, s.r.o., tel.: +421 249 105 041, woodcote@woodcote.sk, www.woodcote.sk Šaľa INTERIÉR EXTERIÉR, s.r.o., tel.: +421 31 770 8815, info@interierexterier.sk, www.interierexterier.sk SCOTLAND Edinburgh MJ IMPROVEMENTS (Professional Suppliers) Ltd, tel.: +44 131-337-7027, mjimprovements@btconnect.com, www.mjimprovements.com SPAIN Calvia (Bugadellas) ECCOWIN SERVICIOS REUNIDOS SL, tel.: +34 971696434, info@eccowin.com, www.eccowin.com Santa Ponica (Baleares) MARTERM MALLORCA S.L., tel.: +34 971693262, daniel@marterm.com SWITZERLAND Arbedo Svizzera INTONEDIL S.A., tel.: + 41 918634711, intonedil@bluewin.ch PORTA KMI POLAND Sp. z o.o. reserve the rights to change without previous information the technology of production and construction of their products. Any information provided in the catalogue shall not be considered an offer in the meaning of the Civil Code. 2010-3292-MP_Katalog_2010_1_ENG_okladka.indd 2 2010-04-23 11:29:44