Manley Performance Steel Connecting Rods

STEEL Manley Performance Steel Connecting Rods...Often Copied, But Never Duplicated!!! Sportsmaster Series The perfect rod for stock replacement, mild performance applications; particularly where class rules require a "stock appearing" rod. Aircraft quality 4340 alloy forgings, machined cap and outer beam and ARP cap screws make this Manley rod an ideal choice for many budget conscious racers. Lightweight and affordable. H-Beam Series "R" Suffix - ARP 2000 bolt upgrades H-Lites - Lightweight versions with 3/8" ARP 2000 bolts H-Beam, H-Tuff and H-Tuff Plus Series for sport compacts Don't be fooled; not all H-Beams are created equal. Manley H-Beams are not only very "economically" priced, but they are finished to the same exacting tolerances and high quality standards as our Sportsmaster and Pro Series rods. Final hone size, thread detail, bend and twist - these are attributes we take very seriously. You will find the Manley H-Beam rods superior to others on the market. Pro Series I-Beam Dirt Series (300M alloy) Turbo Tuff and Tri-Beam Designs for sport compacts "NHRA Legal" for Stock and Super Stock Tour Lites, Lightweights, Standard Weights and Heavy Weights The Manley Pro Series I-Beam rod has become the benchmark for fully machined/billet style high end connecting rods in the performance industry. Multiple weight designs targeting specific markets combined with our finely tuned manufacturing process renders a truly outstanding product. Whether it be our 300M alloy "DIRT SERIES" rod in a 900 HP DLM engine, 4340 material heavy beam design in a twin turbo Chevy LS or our "TURBO TUFF" design in a 1000+ HP Mitsubishi EVO, Manley has the right connecting rod for you!!! A WORD ABOUT HORSEPOWER RATINGS... You will see that we list "horsepower ratings" for each different series/application of Manley connecting rods. However, it is very important to understand that these "ratings" are somewhat subjective. The critical factors that significantly influence the fatigue life of connecting rods (and the horsepower rating) are RPM, stroke, piston weight and power adders. In certain cases, our horsepower ratings may be conservative. Call our tech line if you are unsure based on your specific application. 138 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Small Block Chevrolet H-Beam Rods Standard Weight Series Heat treated, stress relieved, shot peened and 100% magnafluxed Weight matched sets + 1.5 grams Cap fasteners are premium 7/16" ARP 8740 or optional ARP 2000 cap screws Flywheel horsepower range for these rods: 725 HP (ARP 8740), 775 HP (ARP 2000) - Oval Track 750 HP (ARP 8740), 900 HP (ARP 2000) - Drag Race ARP 8740 ARP 2000 Part No. Part No. Length Journal Size Center-to Center Big End Bore Pin Bore Avg. Gram Weight 14050-8 14050R-8 Stock Large 5.700" 2.225".9281" 635 14054-8 14054R-8.300" Longer Large 6.000" 2.225".9281" 640 14055-8 14055R-8.425" Longer Large 6.125" 2.225".9281" 650 14056-8 14056R-8.425" Longer Small 6.125" 2.125".9281" 650 14067-8 14067R-8.550" Longer Large 6.250" 2.225".9281" 660 14051-8 14051R-8.025" Longer Large 6.125" 2.225".9281" 655 LS / LT1 No Offset 14053-8 14053R-8.025" Longer Large 6.125" 2.225".9457" 655 LS / LT1 No Offset P/N 14051 and 14053 are for Small Block Chevy LS / LT1 engines with pistons ready to accept 6.125 length rods. Stock LS / LT1 rods are 6.100 long. Note the pin bore on the 14051-8 is.9281. Stock LS / LT1 pins are.945 diameter. These rods are also provided with Low Profile cap screws enabling extra block and oil pan clearance on stroker applications. P/Ns 14050-8 and 14050R-8 are NHRA Legal for Stock & Super Stock P/Ns 14054-8 and 14054R-8 are NHRA Legal for Olds 307, 350, 403 H-Lite Series Heat treated, stress relieved, shot peened and 100% magnafluxed Weight matched sets + 1.5 grams Cap fasteners are premium 3/8" ARP 2000 cap screws Flywheel horsepower range for these rods is 600+ HP Part No. Length Journal Size Center-to Center Big End Bore Pin Bore Avg. Gram Weight 14034-8.300" Longer Large 6.000" 2.225".9281" 595 14036-8.300" Longer Small 6.000" 2.125".9281" 630 14031-8.025" Longer Large 6.125" 2.225".9281" 615 LS / LT1 No Offset 14033-8.025" Longer Large 6.125" 2.225".9457" 615 LS / LT1 No Offset P/N 14031-8 and 14033-8 are for Small Block Chevy LS / LT1 engines with pistons ready to accept 6.125 length rods. Stock LS / LT1 rods are 6.100 long. Note: The pin bore on the 14031-8 is.9281. Stock LS / LT1 pins are.945 diameter. Common Features Attribute Private brand identification available Dimension Crankpin Small Journal 2.000" Crankpin Large Journal 2.100" Big End Width.941" Pin End Width 1.060" P/N 14031-8 is NHRA Legal for Stock & Super Stock 42350-4 4 pcs. 3/8" ARP 2000 Cap Screws 1.500" UHL 42354-4 4 pcs. 7/16" ARP 8740 Cap Screws 1.450" UHL 42361-4 4 pcs. 7/16" ARP 8740 Cap Screws 1.600" UHL 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 1.450" UHL 42249-4 4 pcs. 7/16" ARP 2000 Cap Screws 1.600" UHL 42384-4 4 pcs. 7/16" ARP 2000 Cap Screws 1.650" UHL 42315-8 8 pcs. Ampco Pin Bushings 42395L-8 8 pcs. Ampco Pin Bushings (14031, 14051) 42274-16 16 pcs. Dowel Bushings 3/8" 42316-16 16 pcs. Dowel Bushings 7/16" WWW.MANLEYPERFORMANCE.COM 139

STEEL Small Block Chevrolet Sportsmaster Rods Forged from aircraft quality 4340 material Entire beam and cap area is profiled to remove stress raisers and render the lightest possible rod Cap fasteners are 3/8" ARP 8740 cap screw Premium Ampco pin bushings Flywheel horsepower range for these rods is 550 HP at 8000 rpm Part No. Length Journal Size Center-to Center Big End Bore Pin Bore Avg. Gram Weight 14101-8 Stock Large 5.700" 2.225".9281" 565 14101ACHA-8 Stock Large 5.700" 2.225".9281" 600 14104-8 Stock Large 5.700" 2.225".8758" 565 14112-8 Stock Large 5.700" 2.225" Press 555 14116-8.150" Longer Large 5.850" 2.225".9281" 580 14103-8.300" Longer Large 6.000" 2.225".9281" 570 14106-8 Stock LS / LT1 Large, No Offset 6.100" 2.225".9281" 575 14114-8 Stock LS / LT1 Large, No Offset 6.100" 2.225".9457" 580 with stock 24mm LS / LT1 wrist pin must use pistons with floating pins 14113-8.425" Longer Large 6.125" 2.225".9281" 585 14109-8 Stock Small 5.700" 2.125" Press 575 14109A-8 Stock Small 5.700" 2.125" Press 575 14105-8 Stock Small 5.700" 2.125".9281" 570 14108-8 Stock Small 5.700" 2.125".8758" 575 14107-8.300" Longer Small 6.000" 2.125".9281" 580 P/N 14106-8 and 14114-8 have no offset on the crank journal, same as the stock LS / LT1 connecting rods Common Features Attribute Dimension Crankpin Sm. Jnl. 2.000" Crankpin Lg. Jnl. 2.100" Big End Width.940" Pin End Width.980" 42383-4 4 pcs. 3/8" ARP 8740 Cap Screws 42310-8 8 pcs..927" Ampco Pin Bushings (.990" O.D. ) 42366-8 8 pcs..927" Ampco Pin Bushings (.997" O.D. ) 42308-8 8 pcs..875" Ampco Pin Bushings 42385-16 16 pcs. Dowel Bushings 3/8" P/Ns 14101-8, 14104-8, 14112-8, 14105-8, 14106-8, 14108-8, 14109-8 and 14114-8 are NHRA Legal for Stock & Super Stock P/Ns 14101-8, and 14104-8 are legal for Chevy 4.3 V-6 P/N 14103-8 is legal for Olds 307, 350, & 403 P/Ns 14106-8 and 14114-8 are NHRA Legal for Small Block Chevy LS P/N 14116-8 is NHRA Legal for AMC 390-401 P/N 14109A-8 is APBA Legal P/N 14101ACHA-8 is ACHA Legal Keith Rocco Pettit Racing Engines 2013/2014 Late Model & SK Modified Champion New London-Waterford Speedbowl 140 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Small Block Chevrolet NHRA Legal Super Stock Manufactured from 4340 aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Cap fasteners are 3/8" ARP 2000 cap screws (14359 has 7/16" ARP 2000) Flywheel horsepower range for these rods is 700+ HP Part No. Length Journal Size Center-to Center Big End Bore Pin Bore You must specify the exact final size pin bore desired Avg. Gram Weight 350 CHEVROLET 14340-8 Stock 350 Honda/IRL 5.700" 2.008"/2.015".8671" to.9281" 540 14440-8 Stock 350 Small 5.700" 2.125".8761" to.9281" 560 14441-8 Stock 350 Large 5.700" 2.225".8761" to.9281" 555 400 CHEVROLET 14438-8 Stock 400 Honda/IRL 5.565" 2.008"/2.015".8671" to.9281" 590 14439-8 Stock 400 Large 5.565" 2.225".8761" to.9281" 590 LS CHEVROLET 14443-8 Stock LS Honda/IRL 6.100" 2.008"/2.015".8671" to.9281" 585 14442-8 Stock LS Large 6.100" 2.225".8761" to.9281" 610 14359-8.025" Longer LS Large 6.125" 2.225".9281" 615 P/N 14359-8 is for Small Block Chevy LS engines with pistons ready to accept 6.125" length rods. Stock LS rods are 6.100" long. Note the pin bore is.9281". Stock LS pins are.945" diameter. The 14359-8 has no offset on the crank journal, same as the stock LS connecting rods. P/N s 14340,14438 and 14443 REQUIRE use of one of the connecting rod bearings listed below. To order rods finished to the exact size for Federal Mogul bearings, affix an F after the rod part number. For rods finished to exact size for Clevite bearings, affix a C after the rod part number. In addition, you MUST specify which Clevite bearing will be used. Bearing Chart Bearing Type Part No. Big End Bore Crank Pin Federal Mogul Clevite Clevite Clevite Common Features Attribute 7195CH 2.008" 1.8885" Honda CB1456P 2.008" 1.8885" Honda CB1663 2.015" 1.8885" Honda CB1664 2.008" 1.8500" IRL Dimension Crankpin Honda/IRL 1.8885"/1.8500" Crankpin Sm. Jnl. 2.000" Crankpin Lg. Jnl. 2.100" Big End Width.940" Pin End Width 1.000" 42350-4 4 pcs. 3/8" ARP 2000 Cap Screws (1.500 UHL) 42351-4 4 pcs. 3/8" ARP 2000 Cap Screws (1.600 UHL) 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws (14359) 42345-8 8 pcs. Ampco Pin Bushings for.875" pin 42393-8 8 pcs. Ampco Pin Bushings for.927" pin 42307-8 8 pcs. Ampco Pin Bushings for 14359 42380-16 16 pcs. Dowel Bushings 3/8" (14340) 42385-16 16 pcs. Dowel Bushings 3/8" 42392-16 16 pcs. Dowel Bushings 7/16" (14359) Jeff Taylor Racing Engines WWW.MANLEYPERFORMANCE.COM 141

STEEL Small Block Chevrolet Tour Lite I-Beam Rods 4340 Material Forged from 4340 aircraft quality material Fully machined to produce the lightest and strongest rod possible 3/8" ARP 2000, ARP 625+ or 3/8" ARP 3.5 cap screws Flywheel horsepower range is 600+ HP Part No. Length Journal Size Center-to Center Big End Bore Avg. Gram Weight 14340-8 Stock Length Honda / IRL 5.700" 2.008" / 2.015" 540 / 550 14344-8.300" Longer Honda / IRL 6.000" 2.008" / 2.015" 540 / 550 14345-8.425" Longer Honda / IRL 6.125" 2.008" / 2.015" 545 / 555 Above rods REQUIRE use of one of the connecting rod bearings listed below. To order rods finished to the exact size for Federal Mogul bearings, affix an F after the rod part number. For rods finished to exact size for Clevite bearings, affix a C after the rod part number. In addition, you MUST specify which Clevite bearing will be used. Above rods are supplied with 1.600" under head length 3/8" ARP 2000 cap screw fasteners P/N 42351. Upgraded 3/8" ARP Custom Age 625+ cap screws P/N 42321 or 3/8" ARP 3.5 cap screws P/N 42358 are available. To order upgraded fasteners, affix an R6 for the ARP Custom Age 625+, RA for the ARP 3.5 after the rod part number. Part No. Length Journal Size Center-to Center Big End Bore Avg. Gram Weight 14240-8 Stock Length Small 5.700" 2.125" 525 14242-8.150" Longer Small 5.850" 2.125" 525 14244-8.300" Longer Small 6.000" 2.125" 535 14245-8.425" Longer Small 6.125" 2.125" 530 14140-8 Stock Length Large 5.700" 2.225" 520 14142-8.150" Longer Large 5.850" 2.225" 530 14144-8.300" Longer Large 6.000" 2.225" 530 14145-8.425" Longer Large 6.125" 2.225" 535 Above rods are supplied with 1.600" under head length 3/8" ARP 2000 cap screw fasteners P/N 42351. Upgraded 3/8" ARP Custom Age 625+ cap screws P/N 42321 or 3/8" ARP 3.5 cap screws P/N 42358 are available. To order upgraded fasteners, affix an R6 for the ARP Custom Age 625+, RA for the ARP 3.5 after the rod part number. Lengths other than these typical sizes may become popular after publication of this catalog. Please inquire about lengths not listed as we may have subsequently added applications. Also, we can manufacture 40 pieces of these rods at special lengths for no additional charge. Bearing Chart Bearing Type Federal Mogul Clevite Clevite Clevite Common Features Attribute Part No. Big End Bore Crank Pin 7195CH 2.008" 1.8885" Honda CB1456P 2.008" 1.8885" Honda CB1663 2.015" 1.8885" Honda CB1664 2.008" 1.8500" IRL Honda / IRL Small.Journal Large.Journal Crankpin 1.8885" / 1.8500" 2.000" 2.100" Pin Bore.9281".9281".9281" Big End Width.940".940".940" Pin End Width 1.000".980".980" 42351-4 4 pcs. 3/8" ARP 2000 Cap Screws 42321-4 4 pcs. 3/8" ARP Custom Age 625+ Cap Screws 42358-4 4 pcs. 3/8" ARP 3.5 Cap Screws 42310-8 8 pcs. Ampco Pin Bushings.975" long 42393-8 8 pcs. Ampco Pin Bushings.995" long 42380-16 16 pcs. Dowel Bushings 3/8".900" long 42398-16 16 pcs. Dowel Bushings 3/8".960" long P/N 14340 is NHRA Legal for Stock & Super Stock 142 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Small Block Chevrolet Forged from 4340 aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Cap fasteners are 7/16" ARP 2000 or optional 7/16" ARP Custom Age 625+ cap screws Flywheel horsepower range for the Lightweight rods is 750+ HP - Oval Track, 800+ HP - Drag Race and for the Standard Weight rods is 850+ HP - Oval Track, 1000+ HP - Drag Race, 1500 + HP (14554) Lightweight Part No. Length Journal Size Center-to Center Big End Bore Avg. Gram Weight 14450-8 Stock Small 5.700" 2.125" 610 14452-8.150" Longer Small 5.850" 2.125" 615 14454-8.300" Longer Small 6.000" 2.125" 620 14455-8.425" Longer Small 6.125" 2.125" 625 14350-8 Stock Large 5.700" 2.225" 600 14352-8.150" Longer Large 5.850" 2.225" 600 14354-8.300" Longer Large 6.000" 2.225" 600 14355-8.425" Longer Large 6.125" 2.225" 645 14359-8.025" Longer Large 6.125" 2.225" 615 LS / LT1 No Offset P/N 14359-8 is for Small Block Chevy LS / LT1 engines with pistons ready to accept 6.125" length rods. Stock LS / LT1 rods are 6.100" long. Note the pin bore is.9281". Stock LS / LT1 pins are.945" diameter. The 14359-8 has no offset on the crank journal, same as the stock LS / LT1 connecting rods. Standard Weight Part No. Length Journal Size Center-to Center Big End Bore Avg. Gram Weight 14254-8.300" Longer Small 6.000" 2.125" 670 14255-8.425" Longer Small 6.125" 2.125" 675 14152-8.150" Longer Large 5.850" 2.225" 670 14154-8.300" Longer Large 6.000" 2.225" 665 14554-8.300" Longer Large 6.000" 2.225" 700 Heavier beam for forced induction applications 14155-8.425" Longer Large 6.125" 2.225" 670 14157-8.550" Longer Large 6.250" 2.225" 685 All connecting rods on this page are supplied with 1.450" under head length 7/16" ARP cap screw fasteners P/N 42390. Upgraded 7/16" ARP Custom Age 625+ cap screws P/N 42252 are available. To order upgraded fasteners, affix R6 after the rod part number. Common Features Attribute Small.Journal Large.Journal Crankpin 2.000" 2.100" Pin Bore.9281".9281" Big End Width.940".940" Pin End Width 1.000" 1.000" 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42252-4 4 pcs. 7/16" ARP Custom Age 625+ Cap Screws 42393-8 8 pcs. Ampco Pin Bushings (Except 14355, 14359) 42307-8 8 pcs. Ampco Pin Bushings (14355, 14359) 42392-16 16 pcs. Dowel Bushings 7/16" P/Ns 14350, 14359 and 14450-8 are NHRA Legal for Stock & Super Stock P/N 14354-8 is NHRA Legal for Olds 307, 350 and 403 P/Ns 14152, 14352 and 14452 are NHRA Legal for AMC 343-390 WWW.MANLEYPERFORMANCE.COM 143

STEEL Small Block Chevrolet Dirt Series - 300M Alloy Forged from 300M aircraft quality material Fully machined to produce the lightest and strongest rod possible 7/16" ARP 2000 or 7/16" ARP Custom Age 625+ cap screws Flywheel horsepower range is 900+ HP Part No. Length Journal Size Center-to Center Big End Bore Avg. Gram Weight 15555-8.425" Longer Small 6.125" 2.125" 660 15556-8.500" Longer Small 6.200" 2.125" 665 15544-8.300" Longer Large 6.000" 2.225" 650 15545-8.425" Longer Large 6.125" 2.225" 660 15546-8.500" Longer Large 6.200" 2.225" 665 All Dirt Series connecting rods are supplied with 7/16 ARP 2000 cap screw fasteners P/N 42390. Upgraded 7/16 ARP Custom Age 625+ cap screws P/N 42252 are available. To order upgraded fasteners, affix an R6 after the rod part number. Common Features Attribute Small.Journal Large.Journal Crankpin 2.000" 2.100" Pin Bore.9281".9281" Big End Width.940".940" Pin End Width.950".950" 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42252-4 4 pcs. 7/16" ARP Custom Age 625+ Cap Screws 42395-8 8 pcs. Ampco Pin Bushings.945" Long 42352-16 16 pcs. Dowel Bushings 7/16" Large Journal 42392-16 16 pcs. Dowel Bushings 7/16" Small Journal Custom Rods Manley Performance will manufacture 300M Dirt Series, Tour Lite or Pro Series I-Beam connecting rods on a custom order basis in lots of 40 identical pieces. We require a signed blueprint before production. Bore & Profile Drill & Tap 144 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Small Block Chevrolet LS / LT1 Series H-Beam & H-Lite Series Rods Heat treated, stress relieved, shot peened and 100% magnafluxed Weight matched sets ± 1.5 grams Cap fasteners are premium 7/16" ARP 8740 or optional ARP 2000 cap screws supplied with the H-Beams and 3/8" ARP 2000 come standard with the H-Lite Flywheel horsepower range for these rods: 600+ HP (3/8" ARP 2000), 725 HP (7/16" ARP 8740), 775 HP (7/16" ARP 2000) - Oval Track 750 HP (7/16" ARP 8740), 900 HP (7/16" ARP 2000) - Drag Race ARP 8740 ARP 2000 Center-to Big End Big End Pin End Pin Avg. Gram Part No. H-LITE - - - - - - 14031-8 LS / LT1.025" Longer 6.125" 2.225".941" 1.060".9281" 615 - - - - - - 14033-8 LS / LT1.025" Longer 6.125" 2.225".941" 1.060".9457" 615 H-BEAM 14051-8 14051R-8 LS / LT1.025" Longer 6.125" 2.225".941" 1.060".9281" 655 14053-8 14053R-8 LS / LT1.025" Longer 6.125" 2.225".941" 1.060".9457" 655 14064-8 14064R-8 RHS Tall Deck 6.300" 2.225".941" 1.060".9281" 690 14065-8 14065R-8 World Warhawk Tall Deck 6.350" 2.225".941" 1.060".9281" 695 14069-8 14069R-8 GM LSX Tall Deck 6.460" 2.225".941" 1.060".9281" 700 P/Ns 14031, 14033, 14051 and 14053 are for Small Block Chevy LS / LT1 engines with pistons ready to accept 6.125 length rods. Stock LS / LT1 rods are 6.100 long. Note the pin bore on the 14031 and 14051-8 is.9281. Stock LS / LT1 pins are.945 diameter. These rods are also provided with Low Profile cap screws enabling extra block and oil pan clearance on stroker applications. Forged from 4340 aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Cap fasteners are 7/16" ARP 2000 cap screws Flywheel horsepower range for these rods: 750+ HP Oval Track and 800+ HP Drag Race (14359 only) 850+ HP Oval Track and 1,200+ HP Drag Race (14364, 14365 and 14369 only), 1,500 + HP (14559 only) Center-to Big End Big End Pin End Pin Avg. Gram LIGHTWEIGHT 14359-8 LS / LT1.025" Longer 6.125" 2.225".940" 1.000".9281" 615 STANDARD WEIGHT 14559-8 LS / LT1.025" Longer 6.125" 2.225".940" 1.000".9281" 705 Heavier beam for forced induction applications 14364-8 RHS Tall Deck 6.300" 2.225".940" 1.000".9281" 680 14365-8 World Warhawk Tall Deck 6.350" 2.225".940" 1.000".9281" 685 14369-8 GM LSX Tall Deck 6.460" 2.225".940" 1.000".9281" 690 All Pro Series connecting rods are supplied with 7/16 ARP 2000 cap screw fasteners P/N 42390. Upgraded 7/16 ARP Custom Age 625+ cap screws P/N 42252 are available. To order upgraded fasteners, affix an R6 after the rod part number. Note: New part numbers are BOLD & ITALICIZED WWW.MANLEYPERFORMANCE.COM 145

STEEL Big Block Chevrolet H-Beam Rods Heat treated, stress relieved, shot peened and 100% individually magnafluxed Weight matched sets + 1.5 grams Cap fasteners are premium 7/16" ARP 8740 or optional ARP 2000 cap screws Flywheel horsepower range for these rods: 900 HP (ARP 8740), 1200 HP (ARP 2000) ARP 8740 ARP 2000 Center-to Big End Crank Pin Part No. Part No. Description Center Bore Pin Bore Avg. Gram Weight 14060-8 14060R-8 Stock 6.135" 2.325" 2.200".9911" 800 14062-8 14062R-8.250" Longer 6.385" 2.325" 2.200".9911" 810 14066-8 14066R-8.400" Longer 6.535" 2.325" 2.200".9911" 810 14072-8 14072R-8.565" Longer 6.700" 2.325" 2.200".9911" 820 Common Features Attribute Dimension Big End Width.991" Pin End Width 1.125" P/N 14060-8 is NHRA Legal for Stock & Super Stock 42361-4 4 pcs. 7/16" ARP 8740 Cap Screws 42249-4 4 pcs. 7/16" ARP 2000 Cap Screws 42327-8 8 pcs. Pin Bushings 42316-16 16 pcs. Dowel Bushings I have used Manley H-Beam rods for years and they have proven to be a reliable choice. David Reher We've been so impressed with the strength and durability that Manley rods provide we made them standard in our "Pro Series" engine lineup. I recommend Manley "M-Power" cranks and rods to anyone looking for additional strength at an exceptional value!! - Scott Shafiroff 146 PHONE: 732.905.3366 FAX: 732.905.3010

Big Block Chevrolet Forged from 4340 aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Cap fasteners are 7/16" ARP 2000 cap screws Flywheel horsepower range for these rods is listed in the box below STEEL NEWLY DESIGNED FOR 2016 Center-to Big End Crank Pin Avg. Gram Horsepower Horsepower Part No. Description Center Bore Pin Bore Weight Oval Track Drag Race 14160-8 Stock Length 6.135" 2.325" 2.200".9911" 810 1,000 1,600+ 14162-8.250" Longer 6.385" 2.325" 2.200".9911" 825 1,000 1,600+ 14166-8.400" Longer 6.535" 2.325" 2.200".9911" 835 1,000 1,600+ 14167-8.400" Longer 6.535" 2.325" 2.200".9911" 875 1,000 1,600+ Marine Duty 14168-8.500" Longer 6.635" 2.325" 2.200".9911" 840 1,000 1,600+ 14170-8.525" Longer 6.660" 2.325" 2.200".9911" 845 1,000 1,600+ 14172-8.565" Longer 6.700" 2.325" 2.200".9911" 845 1,000 1,600+ 14272-8.565" Longer 6.700" 2.325" 2.200".9911" 845 1,000 1,600+ Stroker version of the 14172 14175-8.615" Longer 6.750" 2.325" 2.200".9911" 850 1,000 1,600+ 14173-8.665" Longer 6.800" 2.325" 2.200".9911" 860 1,000 1,600+ 14266-8.400" Longer 6.535" 2.225" 2.100".9911" 745 850 1,000 w/ SBC Lg. Jnl. Big End P/N 14167, 14168, 14172, 14173, 14175 and 14266 can be fitted with ARP Custom Age 625+ bolts. To order these rods with upgraded bolts, affix an R6 to the part number. Common Features P/N 14160-8 is NHRA Legal for Stock & Super Stock P/N 14168-8 is NHRA Legal for Ford 429, 460 P/N 14168-8 is NHRA Legal for Pontiac 350-455 Attribute Dimension Big End Width.990" Pin End Width 1.125" 42384-4 4 pcs. 7/16" ARP 2000 Cap Screws (14160, 14162, 14166, 14170, 14272) 42391-4 4 pcs. 7/16" ARP 2000 Cap Screws (14167, 14168, 14172, 14173, 14175) 42397-4 4 pcs. 7/16" ARP Custom Age 625+ Cap Screws (14167R6, 14168R6, 14172R6, 14173R6, 14175R6) 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws (14266) 42252-4 4 pcs. 7/16" ARP Custom Age 625+ Cap Screws (14266R6) 42327-8 8 pcs. Ampco Pin Bushings 42352-16 16 pcs. Dowel Bushings 7/16" (14160, 14162, 14166, 14170) 42387-16 16 pcs. Dowel Bushings 7/16" (14167, 14168, 14172, 14173, 14175) 42392-16 16 pcs. Dowel Bushings 7/16" (14272, 14266) Note: New part numbers are BOLD & ITALICIZED WWW.MANLEYPERFORMANCE.COM 147

STEEL Chrysler 360 Sportsmaster Rods & NHRA Legal Stock & Super Stock Forged from aircraft quality 4340 material Entire Sportsmaster beam is profiled to remove stress risers and render the lightest possible rod Cap fasteners for 14139C-8 are 3/8" ARP 8740 cap screws Cap fasteners for 14445-8 are 3/8" ARP 2000 cap screws Premium Ampco pin bushings Flywheel horsepower range for 14139C-8 rods is 550 HP Flywheel horsepower range for 14445-8 rods is 700+ HP Sportsmaster Pro Series I-Beam Center-to Big End Big End Crank Pin End Pin Part No. Center Bore Width Pin Width Bore Avg. Gram Weight SPORTSMASTER RODS 14139C-8 6.125" 2.250".933" 2.125" 1.000".9848" 555 PRO SERIES I-BEAM RODS 14445-8 6.125" 2.250".933" 2.125" 1.000".8761" to.9848" 670 You must specify the exact final size pin bore desired P/N 14445-8 is NHRA Legal for Stock & Super Stock Chrysler 5.7L /6.1L /6.4L Hemi / 8.3L, 8.4L Viper V10 H-Beam Rods Heat treated, stress relieved, shot peened and 100% magnafluxed Weight matched sets + 1.5 grams Cap fasteners are premium 7/16" ARP 8740 or optional ARP 2000 cap screws Flywheel horsepower range for these rods: 725 HP (ARP 8740), 775 HP (ARP 2000) - Oval Track 750 HP (ARP 8740), 900 HP (ARP 2000) - Drag Race ARP 8740 Part No. ARP 2000 Center-to Big End Big End Pin End Pin Avg. Gram 14085-8 14085R-8 5.7/6.1L Stock Length 6.240" 2.252".933" 1.000".9281 670 w/ SB Chevy.927" pin 14086-8 14086R-8 5.7L Stock Length 6.240" 2.252".933" 1.000".9457 675 w/ 24mm pin 14087-8 14087R-8 6.1L Stock Length 6.240" 2.252".933" 1.000".9848 665 w/ 25mm pin 14088-8 14088R-8 6.4L Stock Length 6.200" 2.252".933" 1.000".9281 665 w/ SB Chevy.927" pin 14089-8 14089R-8 6.4L Stock Length 6.200" 2.252".933" 1.000".9457 670 w/ 24mm pin 14055-8 14055R-8 5.7/6.1L/6.4L Stroker 6.125" 2.225".941" 1.060".9281 650 w/ SB Chevy 2.100" crank journal and.927" pin 14056-8 14056R-8 5.7/6.1L/6.4L Stroker 6.125" 2.125".941" 1.060".9281 650 w/ SB Chevy 2.000" crank journal and.927" pin 14057-8 14057R-8 5.7/6.1L/6.4L Stroker 6.125" 2.125".941".930".8671 620 w/ SB Chevy 2.000" crank journal and.866" pin 14083-10 14083R-10 8.3/8.4L Viper V10 6.240" 2.252".933" 1.000".9281,.9457 TBA Stock Length or.9848 For P/N 14083 please specify the wrist pin diameter you intend to run when placing your order. Note: New part numbers are BOLD & ITALICIZED 148 PHONE: 732.905.3366 FAX: 732.905.3010

Chrysler 5.7L /6.1L /6.4L Hemi STEEL Forged from 4340 or 300M aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Cap fasteners are 7/16" ARP 2000 or optional 7/16" ARP Custom Age 625+ cap screws Flywheel horsepower range for the Lightweight rods is 750+ HP - Oval Track, 800+ HP - Drag Race, for the Standard Weight rod is 900+ HP - Oval Track, 1200+ HP - Drag Race, and for the 300M rod is 1000+ HP - Oval track, 1300+ HP - Drag Race Note: For part numbers 14460-8 and 14560-8 please specify the wrist pin diameter you intend to run when placing your order. The stock 5.7 HEMI uses a 24mm/.945" wrist pin and the 6.1 HEMI uses a 25mm/.984" wrist pin from the factory. The pistons you are using must have floating pins with a diameter of.927", 24mm/.945", or 25mm/.984". Center-to Big End Crank Big End Pin End Pin Avg. Gram Part No. Description Center Bore Pin Width Width Bore Weight LIGHTWEIGHT 14460-8 5.7/6.1L Stock Length 6.240" 2.252" 2.126".933" 1.000".9281",.9457" or.9848" 595 14455-8 5.7/6.1L/6.4L Stroker 6.125" 2.125" 2.000".940" 1.000".9281" 625 w/ SB Chevy 2.000" crank journal and.927" pin 14461-8 392 Hemi Drag Pak Crate Engine 6.200" 2.225" 2.100".940" 1.000".9281" 610 w/ SB Chevy 2.100" crank journal and.927" pin 14354-8 426 Hemi Drag Pak Crate Engine 6.000" 2.225" 2.100".940" 1.000".9281" 600 w/ SB Chevy 2.100" crank journal and.927" pin STANDARD WEIGHT 14560-8 5.7/6.1L Stock Length 6.240" 2.252" 2.126".933" 1.000".9281",.9457" or.9848" 700 Heavier beam for forced induction applications 14255-8 5.7/6.1L/6.4L Stroker 6.125" 2.125" 2.000".940" 1.000".9281" 675 w/ SB Chevy 2.000" crank journal and.927" pin 300M ALLOY 15555-8 5.7/6.1L/6.4L Stroker 6.125" 2.125" 2.000".940".950".9281" 660 w/ SB Chevy 2.000" crank journal and.927" pin The above connecting rods are supplied with 1.450" under head length 7/16" ARP 2000 cap screw fasteners P/N 42390. Upgraded 7/16" ARP Custom Age 625+ cap screws P/N 42252 are available. To order upgraded fasteners, affix R6 after the rod part number. Dodge 8.3L / 8.4L Viper V10 Flywheel horsepower range for the Lightweight rods is 950+ - Oval Track, 1000+ HP Drag Race and for the Standard Weight rod is 1100+ HP - Oval Track, 1400+ HP - Drag Race Note: For part numbers 14463-10 and 14563-10 please specify the wrist pin diameter you intend to run when placing your order. Page 148 P/Ns 14354-8, 14460-8, & 14461-8 are NHRA Legal for Stock & Super Stock Center-to Big End Crank Big End Pin End Pin Avg. Gram Part No. Description Center Bore Pin Width Width Bore Weight LIGHTWEIGHT 14463-10 8.3/8.4L Stock Length 6.240" 2.252" 2.126".933" 1.000".9281",.9457" or.9848" 595 STANDARD WEIGHT 14563-10 8.3/8.4L Stock Length 6.240" 2.252" 2.126".933" 1.000".9281",.9457" or.9848" 700 Heavier beam for forced induction applications The above connecting rods are supplied with 1.450" under head length 7/16" ARP 2000 cap screw fastners P/N 42390. Upgraded 7/16" ARP Custom AGE 625+ cap screws P/N 42252 are available. To order upgraded fastners, affix "R6" after the rod part number. 42383-4 4 pcs. 3/8" ARP 8740 Cap Screws (14139C) 42350-4 4 pcs. 3/8" ARP 2000 Cap Screws (14445) 42354-4 4 pcs. 7/16" ARP 8740 Cap Screws (H-Beams) 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws (H-Beams) 42307-8 8 pcs. Ampco Pin Bushings (14139C) 42268-8 8 pcs. Ampco Pin Bushings (14445) 42244-8 8 pcs. Ampco Pin Bushings (14057) 42393-8 8 pcs. Ampco Pin Bushings (H-Beams with.927" and 24mm pins) 42385-16 16 pcs. Dowel Bushings 3/8" (14139C,14445) (14445) 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42252-4 4 pcs. 7/16" ARP Custom Age 625+ Cap Screws 42307-8 8 pcs. Ampco Pin Bushings (14460, 14463, 14560, 14563 25mm pin) 42393-8 8 pcs. Ampco Pin Bushings (14255, 14354, 14455, 14460, 14461, 14463, 14560, 14563) 42395-8 8 pcs. Ampco Pin Bushings (15555) 42352-16 16 pcs. Dowel Bushings 7/16" (14354, 14455) 42392-16 16 pcs. Dowel Bushings 7/16" (14255, 14460, 14461, 14463, 14560, 14563, 15555) Note: New part numbers are BOLD & ITALICIZED WWW.MANLEYPERFORMANCE.COM 149

STEEL Chrysler 426 Forged from 4340 aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Cap fasteners are 7/16" ARP 2000 cap screws Flywheel horsepower range for these rods is 1000+ HP Center-to Big End Pin Avg. Gram Part No. Description Center Bore Bore Weight 14177-8 Stock Length w/ 1.031" pin 6.865" 2.500" 1.0321" 915 14185-8.235" Longer w/.990" pin 7.100" 2.500".9911" 955 14187-8.235" Longer w/.990" pin 7.100" 2.325".9911" 955 and BB Chevy rod journal The Big Block Chrysler I-Beam rods listed above can be fitted with ARP Custom Age 625+ bolts P/N 42397. To order these rods with upgraded bolts, affix an R6 to the part number. Common Features Attribute Dimension Big End Width 1.015" Pin End Width 1.180" P/N 14177-8 is NHRA Legal for Stock & Super Stock 42391-4 4 pcs. 7/16" ARP 2000 Cap Screws 42397-4 4 pcs. 7/16" ARP Custom Age 625+ Cap Screws 42305-8 8 pcs. Ampco Pin Bushings for.990" pin 42388-8 8 pcs. Ampco Pin Bushings for 1.031" pin 42387-16 16 pcs. Dowel Bushings 7/16" ( 14177, 14185 ) 42392-16 16 pcs. Dowel Bushings 7/16" ( 14187 ) Ford Powerstroke / GM Duramax Diesel Rods Fully machined to provide the correct balance of strength and weight Cap fasteners are 7/16" ARP 2000 AMPCO 45 wrist pin bushings resist deformation at high cylinder pressures Ford 7.3L Powerstroke ARP 2000 Center-to Big End Big End Pin End Pin Avg. Gram 14161-8 Stock Length w/ Stock pin 7.128" 2.691" 1.231" 1.172" 1.309" 1420 GM 6.6L Duramax ARP 2000 Center-to Big End Big End Pin End Pin Avg. Gram 14163-8* Stock Length w/ Stock pin 6.417" 2.6374" 1.117" 1.280" Top 1.359" 1130 1.535" Bottom Trapezoidal Profile * Must use Clevite CB1805 rod bearings or equivalent 42384-4 4 pcs. 7/16" ARP 2000 Cap Screws (14163) 42391-4 4 pcs. 7/16" ARP 2000 Cap Screws (14161) 42233-4 4 pcs. Ampco Pin Bushings (14161) 42234-4 4 pcs. Ampco Pin Bushings (14163) 42387-16 16 pcs. Dowel Bushings 7/16" (14161) 42392-16 16 pcs. Dowel Bushings 7/16" (14163) POWERSTROKE DURAMAX 150 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Ford 2.3L Sportsmaster Rods Esslinger Type Center-to Big End Big End Pin End Pin Avg. Gram 14117-4 Modified Ford 2.3L 5.700" 2.172".990".980".9281" 600 Esslinger type w/.927" pin 42383-4 4 pcs. 3/8" ARP 8740 Cap Screws 42310-8 8 pcs. Ampco Pin Bushings 42385-16 16 pcs. Dowel Bushings 3/8" Ford 351W Center-to Big End Crank Big End Pin End Pin Avg. Gram Part No. Description Center Bore Pin Width Width Bore Weight 14354C-8 351W Ford 6.000" 2.225" 2.100".940" 1.000".9131" 605 Pro Series I-Beam - Lightweight with standard width SB Chevy bearing 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42345-8 8 pcs. Ampco Pin Bushings 42392-16 16 pcs. Dowel Bushings 7/16" Ford 429 6.800" Center-To-Center Center-to Big End Big End Pin End Pin Avg. Gram 14173-8 Ford 429 6.800" 2.325".990" 1.125".9911" 860 42391-4 4 pcs. 7/16" ARP 2000 Cap Screws 42327-8 8 pcs. Ampco Pin Bushings 42387-16 16 pcs. Dowel Bushings 7/16" WWW.MANLEYPERFORMANCE.COM 151

STEEL Ford 4.6L Modular V-8 H-Beam Rods Heat treated, stress relieved, shot peened and 100% magnafluxed Weight matched sets + 1.5 grams Cap fasteners are 3/8" ARP 8740 or optional ARP 2000 cap screws Flywheel horsepower range for these rods is 700 HP (ARP 8740), 750+ HP (ARP 2000) ARP 8740 Part No. ARP 2000 Center-to Big End Big End Pin End Pin Avg. Gram 14042-8 14042R-8 4.6 L Stock Length 5.933" 2.239".940".940".8671" 615 w/ 22mm pin 14044-8 14044R-8 4.6 L Stroker 5.850" 2.125".940".940".8671" 605 w/ 22mm pin and a 2.000" crank journal Private brand identification available 42383-4 4 pcs. 3/8" ARP 8740 Cap Screws 42350-4 4 pcs. 3/8" ARP 2000 Cap Screws 42302-8 8 pcs. Ampco Pin Bushings 42260-8 8 pcs. Ampco Pin Bushings (14044) 42274-16 16 pcs. Dowel Bushings 3/8 " P/Ns 14042-8 and 14042R-8 are NHRA Legal for Stock & Super Stock Manley Performance was the exclusive connecting rod supplier for the 2003 / 2004 Ford SVT Mustang Cobra Forged from 4340 or 300M aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Cap fasteners are 7/16" ARP 2000 Flywheel horsepower range for the Lightweight rods is 750+ HP - Oval Track, 800+ HP - Drag Race, for the Standard Weight rod is 900+ HP - Oval Track, 1200+ HP - Drag Race, and for the 300M rod is 900+ HP - Oval track, 1200+ HP - Drag Race Center-to Big End Big End Pin End Pin Avg. Gram LIGHTWEIGHT 14318-8 Stock Length w/ 22mm pin 5.933" 2.239".940".940".8671" 600 14320-8 4.6 L Stroker w/ 22mm pin 5.850" 2.125".940".940".8671" 605 and a 2.000 crank journal STANDARD WEIGHT 14518-8 Stock Length w/ 22mm pin 5.933" 2.239".940".940".8671" 685 Heavier beam for forced induction applications 14520-8 4.6 L Stroker w/ 22mm pin 5.850" 2.125".940".940".8671" 690 and a 2.000 crank journal Heavier beam for forced induction applications 300M ALLOY 15318-8 Stock Length w/ 22mm pin 5.933" 2.239".940".940".8671" TBA 15320-8 4.6 L Stroker w/ 22mm pin 5.850" 2.125".940".940".8671" TBA and a 2.000 crank journal 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42302-8 8 pcs. Ampco Pin Bushings 42392-16 16 pcs. Dowel Bushings 7/16" P/N 14318-8 is NHRA Legal for Stock & Super Stock Note: New part numbers are BOLD & ITALICIZED Modular Mustang Racing 152 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Ford 5.4L Modular V-8 H-Beam Rods Heat treated, stress relieved, shot peened and 100% magnafluxed Weight matched sets + 1.5 grams Cap fasteners are 3/8" ARP 8740 or optional ARP 2000 cap screws Flywheel horsepower range for these rods is 700 HP (ARP 8740), 750+ HP (ARP 2000) ARP 8740 ARP 2000 Center-to Big End Big End Pin Avg. Gram Part No. Part No. Description Center Bore Width Bore Weight 14040-8 14040R-8 5.4 L Stock Length 6.657" 2.239".940".8671" 645 w/ 22mm pin P/N 14040 will also work for the 6.8L V10 modular Private brand identification available 42383-4 4 pcs. 3/8" ARP 8740 Cap Screws 42350-4 4 pcs. 3/8" ARP 2000 Cap Screws 42302-8 8 pcs. Ampco Pin Bushings 42274-16 16 pcs. Dowel Bushings 3/8 P/Ns 14040-8 and 14040R-8 are NHRA Legal for Stock & Super Stock Ford GT Powered by 5.4L Supercharged Modular Engine with Manley H-Beam Steel Connecting Rods Forged from 4340 or 300M aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Cap fasteners are 7/16" ARP 2000 Flywheel horsepower range for the Lightweight rods is 750+ HP - Oval Track, 800+ HP - Drag Race, for the Standard Weight rod is 900+ HP - Oval Track, 1200+ HP - Drag Race, and for the 300M rod is 1200+ HP - Oval track, 1500+ HP - Drag Race Center-to Big End Big End Pin End Pin Avg. Gram LIGHTWEIGHT 14319-8 Stock Length w/ 22mm pin 6.657" 2.239".940".940".8671" 620 STANDARD WEIGHT 14321-8 Stock Length w/ 22mm pin 6.657" 2.239".940".940".8671" 725 Heavier beam for forced induction applications 300M ALLOY 15321-8 Stock Length w/ 22mm pin 6.657" 2.239".940".940".8671" TBA Heavier beam for forced induction applications P/N 14319, 14321, and 15321 will also work for the 6.8L V10 modular 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42302-8 8 pcs. Ampco Pin Bushings 42392-16 16 pcs. Dowel Bushings 7/16" P/N 14319-8 is NHRA Legal for Stock & Super Stock John Mihovetz Note: New part numbers are BOLD & ITALICIZED WWW.MANLEYPERFORMANCE.COM 153

STEEL Ford 5.0L DOHC Coyote V-8 H-Beam Rods Heat treated, stress relieved, shot peened and 100% magnafluxed Weight matched sets + 1.5 grams Cap fasteners are 3/8" ARP 8740 or optional ARP 2000 cap screws Flywheel horsepower range for these rods is 700 HP (ARP 8740), 750+ HP (ARP 2000) ARP 8740 Part No. ARP 2000 Center-to Big End Big End Pin End Pin Avg. Gram 14042-8 14042R-8 Stock Length 5.933" 2.239".940".940".8671" 615 w/ 22mm pin P/Ns 14042-8 and 14042R-8 are NHRA Legal for Stock & Super Stock Forged from 4340 or 300M aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Cap fasteners are 7/16" ARP 2000 Flywheel horsepower range for the Lightweight rods is 750+ HP - Oval Track, 800+ HP - Drag Race, for the Standard Weight rod is 900+ HP - Oval Track, 1200+ HP - Drag Race, and for the 300M rod is 900+ HP - Oval track, 1200+ HP - Drag Race Center-to Big End Big End Pin End Pin Avg. Gram LIGHTWEIGHT 14318-8 Stock Length w/ 22mm pin 5.933" 2.239".940".940".8671" 595 STANDARD WEIGHT 14518-8 Stock Length w/ 22mm pin 5.933" 2.239".940".940".8671" 685 Heavier beam for forced induction applications 300M ALLOY 15318-8 Stock Length w/ 22mm pin 5.933" 2.239".940".940".8671" TBA H-Beam 42383-4 4 pcs. 3/8" ARP 8740 Cap Screws 42350-4 4 pcs. 3/8" ARP 2000 Cap Screws 42302-8 8 pcs. Ampco Pin Bushings 42274-16 16 pcs. Dowel Bushings 3/8" Ford 6.2L SOHC Raptor V-8 H-Beam Rods Heat treated, stress relieved, shot peened and 100% magnafluxed Weight matched sets + 1.5 grams Cap fasteners are 7/16" ARP 8740 or optional ARP 2000 cap screws Flywheel horsepower range for these rods is 750 HP (ARP 8740), 800 HP (ARP 2000) ARP 8740 Part No. P/N 14318 is NHRA Legal for Stock & Super Stock I-Beam 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42302-8 8 pcs. Ampco Pin Bushings 42392-16 16 pcs. Dowel Bushings 7/16" ARP 2000 Center-to Big End Big End Pin End Pin Avg. Gram 14045-8 14045R-8 Stock Length w/.927" pin 6.200" 2.239".978".978".9281" 680 Note: New part numbers are BOLD & ITALICIZED 42361-4 4 pcs. 7/16" ARP 8740 Cap Screws 42249-4 4 pcs. 7/16" ARP 2000 Cap Screws 42307-8 8 pcs. Ampco Pin Bushings 42392-16 16 pcs. Dowel Bushings 7/16" 154 PHONE: 732.905.3366 FAX: 732.905.3010

Ford 6.2L SOHC Raptor V-8 Lightweight Forged from 4340 aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Shot peened after machining to MIL spec and 100% magnafluxed Cap fasteners are 7/16" ARP 2000 cap screws Flywheel horsepower range for these rods is 800+ HP STEEL Center-to Big End Big End Pin End Pin Avg. Gram 14322-8 Stock Length w/.927" pin 6.200" 2.239".978".978".9281" 640 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42307-8 8 pcs. Ampco Pin Bushings 42392-16 16 pcs. Dowel Bushings 7/16" Ford 3.5L DOHC "EcoBoost" V-6 Ford 3.7L DOHC "Cyclone" V-6 H-Beam Rods Heat treated, stress relieved, shot peened and 100% magnafluxed Weight matched sets ± 1.5 grams Cap fastners are 7/16" ARP 8740 or optional ARP 2000 cap screws Flywheel horsepower range for these rods is 600 HP (ARP 8740), 650+ HP (ARP 2000) ARP 8740 Part No. ARP 2000 Center-to Big End Big End Pin End Pin Avg. Gram 14082-6 14082R-6 Stock Length 6.011" 2.357".855".855".9063" TBA w/ 23mm pin Standard Weight Forged from 4340 aircraft quality vacuum degassed material Fully machined to produce the lightest and strongest rod possible Shot peened after machining to MIL spec and 100% magnafluxed Cap fastners are 7/16" ARP 2000 or optional ARP 625+ cap screws Flywheel horsepower range for these rods is 800 HP (ARP 2000), 1,000+ HP (ARP 625+) ARP 2000 Part No. ARP 625+ Center-to Big End Big End Pin End Pin Avg. Gram 14523-6 14523R6-6 Stock Length w/ 23mm pin 6.011" 2.357".855".855".9063" 620 Heavier beam for forced induction applications H-Beam I-Beam 42354-4 4 pcs. 7/16" ARP 8740 Cap Screws 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42053-6 6 pcs. Ampco Pin Bushings 42049-12 12 pcs. Dowel Bushings 7/16" Note: New part numbers are BOLD & ITALICIZED 42390-4 4 pcs. 7/16" ARP 2000 Cap Screws 42252-4 4 pcs. 7/16" ARP 625+ Cap Screws 42053-6 6 pcs. Ampco Pin Bushings 42352-12 12 pcs. Dowel Bushings 7/16" WWW.MANLEYPERFORMANCE.COM 155

STEEL Acura / Audi / Dodge / Ford / Honda / Mazda H-Beam Rods Heat treated, stress relieved, shot peened and 100% individually magnafluxed Weight matched sets + 1.5 grams Cap fasteners are 3/8" ARP 2000 except part number 14017 which is supplied with 7/16" ARP 8740 Flywheel horsepower range for these rods in a 4 cylinder application is 600+ and for a 6 cylinder application the range is 800+ Note: Part number 14017 is also available with 7/16" ARP 2000 cap screws yielding a 1100+ horsepower rating. Affix R after the rod part number (14017R-6) Center-to Big End Big End Pin Pin Avg. Gram Part No. Description Center Bore Width Diameter Bore Weight ACURA 14014-4 RSX 2.0L V-Tec DOHC 5.472" 2.008".780".866" (22mm).8671" 525 K20 2002-up 14025-4 Integra LS 1.8 non V-Tec DOHC 5.394" 1.890".935".827" (21mm).8281" 515 ( B18A, B18B, B20B, B20Z 1990-up ) 14026-4 Integra GSR 1.8 V-Tec DOHC 5.433" 1.890".858".827" (21mm).8281" 500 ( B18C 1994-up ) 14013-4* D16 (all) & ZC 5.394" 1.890".898".748" (19mm).7491" 525 AUDI 14007-4 1.8L Turbo 5.669" 1.992".980".787" (20mm).7881" 580 DODGE 14004-4 Neon SOHC/DOHC 2.0L 420A 5.472" 2.008" 1.031".827" (21mm).8281" 570 14010-4 Neon SRT-4 2.4L I4 DOHC 5.945" 2.087" 1.015".866" (22mm).8671" 595 FORD 14001-4 Duratec 2.0L DOHC 5.758" 1.970".859".827" (21mm).8281" 550 14080-4 EcoBoost 2.0L 6.136" 2.167".860".886" (22.5mm).8868" TBA 14081-4 EcoBoost 2.3L 5.875" 2.167".860".886" (22.5mm).8868" TBA 14017-6 BA Falcon XR6 Turbo 4.0L 6.058" 2.239".990".866" (22mm).8671" 645 HONDA 14012-4 1.6L V-Tec DOHC 5.290" 1.890".935".827" (21mm).8281" 535 B16A 1992-up 14013-4* D16 (all) & ZC 5.394" 1.890".898".748" (19mm).7491" 525 14025-4 CR-V 2.0L DOHC 5.394" 1.890".935".827" (21mm).8281" 515 ( B20B/B20Z 1996-2001 ) 14015-4 CR-V 2.4L V-Tec DOHC 5.984" 2.008".780".866" (22mm).8671" 545 K24 2002-up 14016-4 Prelude 2.2L V-Tec DOHC 5.636" 2.008".935".866" (22mm).8671" 550 H22 1992-up MAZDA 14011-4 Miata B6/BP 1.6 & 1.8L 5.233" 1.890".860".787" (20mm).7881" 535 14030-4 Mazda Speed 3 MZR 2.3L DISI Turbo 5.927" 2.166".859".866" (22mm).8671" 610 14032-4 Mazda Speed 3 MZR 2.3L DISI Turbo 5.927" 2.166".859".886" (22.5mm).8868" 610 * Honda D16 may require some minor clearancing at the base of the cylinder walls. This is more common with older ZC, D16A and D16Z6 blocks. Note: Single replacement connecting rod pieces are also available. Just order your part number as a -1. Private brand identification available Note: New part numbers are BOLD & ITALICIZED 156 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Mitsubishi / Nissan H-Beam Rods Heat treated, stress relieved, shot peened and 100% individually magnafluxed Weight matched sets + 1.5 grams Cap fasteners are 3/8" ARP 2000 except P/N 14018 which is supplied with 7/16" ARP 8740 Flywheel horsepower range for these rods in a 4 cylinder application is 600+ and for a 6 cylinder application the range is 800+ Note: Part number 14018 is also available with 7/16" ARP 2000 cap screws yielding a 1100+ horsepower rating. Affix R after the rod part number (14018R-6) Center-to Big End Big End Pin Pin Avg. Gram Part No. Description Center Bore Width Diameter Bore Weight MITSUBISHI 14004-4 Eagle Talon SOHC to DOHC 2.0L 420A 5.472" 2.008" 1.031".827" (21mm).8281" 570 14021-4 Eclipse GS, GST, GSX 5.905" 1.890" 1.115".827" (21mm).8281" 550 & Eagle Talon TSi 2.0 (6 Bolt 4G63, 4G63T 1990-1993.5 ) Recommended bearings to be used: ACL 4B1146/H or Clevite CB-1120AL 14002-4 Eclipse GS, GST, GSX 5.905" 1.890" 1.115".866" (22mm).8671" 550 & Eagle Talon TSi 2.0 (6 Bolt 4G63, 4G63T 1990-1993.5 ) Recommended bearings to be used: ACL 4B1146/H or Clevite CB-1120AL 14022-4 Eclipse GST, GSX 5.905" 1.890" 1.038".866" (22mm).8671" 580 & Eagle Talon TSi 2.0 (7 Bolt 4G63, 4G63T 1993.5-1999 ) Evolution VIII, IX (4G63T 2003-2006) Recommended bearings to be used: ACL 4B1185/H or Clevite CB-1643P 14020-4 Eclipse GST, GSX & Eagle Talon TSi 2.0 6.142" 1.890" 1.038".866" (22mm).8671 545 (7 Bolt 4G63, 4G63T 1993.5-1999 ).237" / 6mm Longer Evolution VIII, IX (4G63T 2003-2006) 14029-4 EVO X 4B11T (2008-Up) 5.656" 2.165".860".9055" (23mm).9063 535 NISSAN 14023-4 2.0 SR20DE, SR20DET (1991-2002 ) 5.365" 2.008".900".866" (22mm).8671" 505 14006-4 KA24E (1989-1990), KA24DE (1991-1998), 240SX 6.495" 2.086".973".827" (21mm).8281" 615 14028-6 RB25DE(T), RB26DETT (Stock 21mm pin) 4.783" 2.008".857".827" (21mm).8281" 490 14018-6 RB30E/T 5.995" 2.087".856".827" (21mm).8281" 610 14019-6 VQ35DE(T) 5.680" 2.165".820".866" (22mm).8671" 525 (2002-Up Altima/Maxima and 2003-Up 350Z) Note: Single replacement connecting rod pieces are also available. Just order your part number as a -1. Private brand identification available COBB Tuning Mitsubishi EVO X Note: New part numbers are BOLD & ITALICIZED WWW.MANLEYPERFORMANCE.COM 157

STEEL Subaru / Toyota / VW H-Beam Rods Heat treated, stress relieved, shot peened and 100% individually magnafluxed Weight matched sets + 1.5 grams Cap fasteners are 3/8" ARP 2000 Flywheel horsepower range for these rods in a 4 cylinder application is 600+ and for a 6 cylinder application the range is 800+ Center-to Big End Big End Pin Pin Avg. Gram Part No. Description Center Bore Width Diameter Bore Weight SUBARU 14024-4 WRX EJ205/STi EJ257 5.137" 2.165".840".905" (23mm).9063" 525 TOYOTA 14008-4 Celica 1986-1999, 5.428" 2.008" 1.055".866" (22mm).8671" 565 MR2 1990-1999 3S-GTE DOHC 14027-6 Supra 3.0 2JZG (1993-1998) 5.590" 2.167" 1.015".866" (22mm).8671" 575 VOLKSWAGEN 14007-4 1.8L Turbo 5.669" 1.992".980".787" (20mm).7881" 580 Mazda / Mitsubishi / Subaru / Toyota H-Tuff & H-Tuff Plus Rods Heat treated, stress relieved, shot peened and 100% individually magnafluxed Weight matched sets + 1.5 grams Cap fasteners are 3/8" ARP 2000 for the H-Tuff and 3/8" ARP Custom Age 625+ for the H-Tuff Plus Flywheel horsepower range for the these rods in a 4 cylinder application is 750 with the ARP 2000 bolts and 950 with ARP 625+ bolts. In a 6 cylinder application the horsepower range is 1000 with the ARP 2000 bolts and 1200 with the ARP 625+ bolts. H-Tuff Design H-Tuff H-Tuff Plus Center-to Big End Big End Pin Pin Avg. Gram Part No. Part No. Description Center Bore Width Diameter Bore Weight MAZDA 15032-4 15032R6-4 Mazda Speed 3 MZR 2.3L DISI Turbo 5.927" 2.166".859".886" (22.5mm).8868" TBA MITSUBISHI 15022-4 15022R6-4 Eclipse GST, GSX & 5.905" 1.890" 1.038".866" (22mm).8671" TBA Eagle Talon TSi 2.0 (7 Bolt 4G63, 4G63T 1993.5-1999) Evolution VIII, IX (4G63T 2003-2006) Recommended bearings to be used: ACL 4B1185/H or Clevite CB-1643P 15020-4 15020R6-4 Eclipse GST, GSX & Eagle Talon TSi 2.0 6.142" 1.890" 1.038".866" (22mm).8671 TBA (7 Bolt 4G63, 4G63T 1993.5-1999).237" / 6mm Longer Evolution VIII, IX (4G63T 2003-2006) 15029-4 15029R6-4 EVO X 4B11T (2008-Up) 5.656" 2.165".860".9055" (23mm).9063 TBA SUBARU 15024-4 15024R6-4 WRX EJ205/STi EJ257 5.137" 2.165".840".905" (23mm).9063" 575 TOYOTA 15027-6 15027R6-6 Supra 3.0 2JZG (1993-1998) 5.590" 2.167" 1.015".866" (22mm).8671" 645 Note: Single replacement connecting rod pieces are also available. Just order your part number as a -1. Private brand identification available Note: New part numbers are BOLD & ITALICIZED 158 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Acura / Dodge / Ford / Honda / Hyundai / Mazda Turbo Tuff Design Forged from 4340 aircraft quality vacuum degassed material Specifically designed to handle high horsepower applications when using turbos and/or nitrous Fasteners are 3/8" ARP 2000, except P/N 14427 is supplied with 7/16" ARP 2000 fasteners Flywheel horsepower range for these rods in a 4 cylinder application is 1,000+ and for a 6 cylinder application the range is 1,250+ Center-to Big End Big End Pin Pin Avg. Gram Part No. Description Center Bore Width Diameter Bore Weight ACURA 14404-4 RSX 2.0 V-Tec DOHC (K20 2002-up) 5.472" 2.008".780".866" (22mm).8671" 560 14412-4 Integra LS 1.8 non V-Tec DOHC (B18A, B18B, B20B, B20Z 1990-up) 5.394" 1.890".935".827" (21mm).8281" 555 14414-4 Integra GSR 1.8 V-Tec DOHC ( B18C 1994-up ) 5.433" 1.890".858".827" (21mm).8281" 540 DODGE 14420-4 Neon SRT-4 2.4 I4 DOHC 5.945" 2.087" 1.015".866" (22mm).8671" 695 FORD 14433-4 EcoBoost 2.0L 6.136" 2.167".860".886" (22.5mm).8868" 615 14434-4 EcoBoost 2.3L 5.875" 2.167".860".886" (22.5mm).8868" 605 14427-6 BA Falcon XR6 Turbo 4.0L 6.058" 2.239".990".866" (22mm).8671" 695 HONDA 14415-4 1.6 V-Tec DOHC (B16A 1992-up) 5.290" 1.890".935".827" (21mm).8281" 550 14412-4 CR-V 2.0L DOHC (B20B/B20Z 1996-2001) 5.394" 1.890".935".827" (21mm).8281" 555 14405-4 CR-V 2.4 V-Tec DOHC ( K24 2002-up ) 5.984" 2.008".780".866" (22mm).8671" 585 14417-4 Prelude 2.2 V-Tec DOHC (H22 1992-up) 5.636" 2.008".935".866" (22mm).8671" 615 HYUNDAI 14410-4 Genesis Coupe 2.0L Turbo Theta I4 5.753" 2.008".860".866" (22mm).8671" 635 MAZDA 14430-4 Mazda Speed 3 MZR 2.3L DISI Turbo 5.927" 2.166".859".866" (22mm).8671" 605 14432-4 Mazda Speed 3 MZR 2.3L DISI Turbo 5.927" 2.166".859".886" (22.5mm).8868" 605 All Turbo Tuff series rods on this page can be fitted with ARP 625+ bolts. To order, affix an R6 to the part number. IAG prepped Subaru STi Note: Single replacement connecting rod pieces are also available. Just order your part number as a -1. Note: New part numbers are BOLD & ITALICIZED WWW.MANLEYPERFORMANCE.COM 159

STEEL Mitsubishi / Nissan Turbo Tuff Design Forged from 4340 aircraft quality vacuum degassed material (P/N s 15403, 15424 and 15524 are made from 300M alloy with a flywheel horsepower range of 1,400+) Specifically designed to handle high horsepower applications when using turbos and / or nitrous Fasteners are 3/8" ARP 2000, except P/N s 14424, 14428, 15424 and 15524 are supplied with 7/16" ARP 2000 fasteners Flywheel horsepower range for these rods in a 4 cylinder application is 1,000+ and for a 6 cylinder application the range is 1,250+ Center-to Big End Big End Pin Pin Avg. Gram Part No. Description Center Bore Width Diameter Bore Weight MITSUBISHI 14413-4 Eclipse GS, GST, GSX & Eagle Talon TSi 2.0 5.905" 1.890" 1.115".827" (21mm).8281" 695 (6 Bolt 4G63, 4G63T 1990-1993.5 ) 14407-4 Eclipse GS, GST, GSX & Eagle Talon TSi 2.0 5.905" 1.890" 1.115".866" (22mm).8671" 685 (6 Bolt 4G63, 4G63T 1990-1993.5 ) 14426-4 Eclipse GS, GST, GSX & Eagle Talon TSi 2.0 6.142" 1.890" 1.115".866" (22mm).8671" 700 (6 Bolt 4G63, 4G63T 1990-1993.5 ).237" / 6mm Longer 14403-4 Eclipse GST, GSX & Eagle Talon TSi 2.0 5.905" 1.890" 1.038".866" (22mm).8671" 675 (7 Bolt 4G63, 4G63T 1993.5-1999 ) Evolution VIII, IX (4G63T 2003-2006) 15403-4 Same as the 14403 except made from 300M alloy 5.905" 1.890" 1.038".866" (22mm).8671" 675 14400-4 Eclipse GST, GSX & Eagle Talon TSi 2.0 5.905" 1.890" 1.038".866" (22mm).8671" 630 (7 Bolt 4G63, 4G63T 1993.5-1999 ) Evolution VIII, IX (4G63T 2003-2006) Stroker, lighter weight straight beam design. 14421-4 Eclipse GST, GSX & Eagle Talon TSi 2.0 6.142" 1.890" 1.038".866" (22mm).8671" 685 (7 Bolt 4G63, 4G63T 1993.5-1999 ).237" / 6mm Longer Evolution VIII, IX (4G63T 2003-2006) 14422-4 Eclipse GST, GSX & Eagle Talon TSi 2.0 6.378" 1.890" 1.038".866" (22mm).8671" 700 (7 Bolt 4G63, 4G63T 1993.5-1999 ).473" / 12mm Longer Evolution VIII, IX (4G63T 2003-2006) 14409-4 EVO X 4B11T (2008-Up) 5.656" 2.165".860".9055" (23mm).9063" 645 NISSAN 14408-4 2.0 SR20DE, SR20DET (1991-2002) 5.365" 2.008".900".866" (22mm).8671" 575 14401-4 KA24E (1989-1990), KA24DE (1991-1998), 240SX 6.495" 2.086".973".827" (21mm).8281" 655 14411-6 RB25DE(T), RB26DETT (Stock 21mm pin) 4.783" 2.008".857".827" (21mm).8281" 605 14418-6 RB25DE(T), RB26DETT (22mm pin) 4.783" 2.008".857".866" (22mm).8671" 605 14428-6 RB30E/T 5.995" 2.087".856".827" (21mm).8281" 625 14406-6 VQ35DE(T) (2002-Up Altima/Maxima and 2003-Up 350Z) 5.680" 2.165".820".866" (22mm).8671" 585 14424-6 GT-R 3.8 VR38DETT* 6.500" 2.323".897".9055" (23mm).9063" 730 15424-6 GT-R 3.8 VR38DETT 300M alloy Lightweight design* 6.500" 2.323".897".9055" (23mm).9063" 730 15524-6 GT-R 3.8 VR38DETT 300M alloy Heavyweight design 6.500" 2.323".897".9055" (23mm).9063" 805 * 14424 and 15424 are drop in designs - no balancing required when using stock crank/piston All Turbo Tuff series rods (except P/N 14424, 15424 and 15524) can be fitted with ARP 625+ bolts. To order, affix an R6 to the part number. Note: Single replacement connecting rod pieces are also available. Just order your part number as a -1. 160 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Renault / Subaru / Toyota Turbo Tuff Design Forged from 4340 aircraft quality vacuum degassed material Specifically designed to handle high horsepower applications when using turbos and / or nitrous Fasteners are 3/8" ARP 2000 Flywheel horsepower range for these rods in a 4 cylinder application is 1,000+ and for a 6 cylinder application the range is 1,250+ Center-to Big End Big End Pin Pin Avg. Gram Part No. Description Center Bore Width Diameter Bore Weight RENAULT 14423-4 Megane, Clio 5.669" 2.031".984".827" (21mm).8278" 615 SUBARU 14431-4 BRZ 2.0L 5.090" 2.087".843".866" (22mm).8671" 575 14416-4 WRX EJ205/STi EJ257 5.137" 2.165".840".9055" (23mm).9063" 590 14436-4 WRX EJ205/STi EJ257 5.216" 2.165".840".9055" (23mm).9063" TBA.079" / 2mm Longer TOYOTA 14431-4 Scion FR-S 2.0L 5.090" 2.087".843".866" (22mm).8671" 575 14419-4 Scion 2.4 2AZFE 5.886" 2.008".784".866" (22mm).8671" 565 14402-6 Supra 3.0 2JZG (1993-1998) 5.590" 2.167" 1.015".866" (22mm).8671" 645 Audi / Lamborghini / Nissan / Toyota Pro Series Tri-Beam Design Tapered I-Beam with undercut beam profile optimizes strength-to-weight Ribbed pin end surround helps to maintain pin bore roundness Pin oil holes at 10:00 and 2:00 improve pin bore lubrication Large radius cap corners with a shallow bolt spotface improves crank end fatigue strength Center-to Big End Big End Pin Pin Avg. Gram Part No. Description Center Bore Width Diameter Bore Weight AUDI / LAMBORGHINI 14435TB-10 Audi R8 / Lamborghini 6.063" 2.236".764".787" (20mm).7881" TBA NISSAN 14424TB-6 GT-R 3.8 VR38DETT 6.500" 2.323".897".9055" (23mm).9063" 745 15424TB-6 GT-R 3.8 VR38DETT 300M alloy 6.500" 2.323".897".9055" (23mm).9063" 730 TOYOTA 14402TB-6 Supra 3.0 2JZG (1993-1998) 5.590" 2.167" 1.015".866" (22mm).8671" 645 Note: Single replacement connecting rod pieces are also available. Just order your part number as a -1. Note: New part numbers are BOLD & ITALICIZED WWW.MANLEYPERFORMANCE.COM 161

STEEL H-Beam, H-Tuff & H-Tuff Plus Rods Replacement Bolts and Specifications Connecting Recommended Recommended Connecting Recommended Recommended Rod Bolt Torque Bolt Stretch Rod Bolt Torque Bolt Stretch Part No. Part No. w/ 30wt. Oil w/ 30wt. Oil Part No. Part No. w/ Manley Lube w/ Manley Lube 14001 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14002 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14003 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14004 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14005 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14006 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14007 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14008 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14009 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14010 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14011 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14012 42351-1 65 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14013 42351-1 65 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14014 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14015 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14016 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14017 42354-1 95 ft./lbs..0050"-.0054" - - - - - - - - - - - - - - - - - - - - - - - - 14017R 42390-1 90 ft./lbs..0050"-.0060" - - - - - - - - - - - - - - - - - - - - - - - - 14018 42354-1 95 ft./lbs..0050"-.0054" - - - - - - - - - - - - - - - - - - - - - - - - 14018R 42390-1 90 ft./lbs..0050"-.0060" - - - - - - - - - - - - - - - - - - - - - - - - 14019 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14020 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14021 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14022 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14023 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14024 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14025 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14026 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14027 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14028 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14029 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14030 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14032 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14080 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 14081 42350-1 60 ft./lbs..0058"-.0062" - - - - - - - - - - - - - - - - - - - - - - - - 15020 42350-1 60 ft./lbs..0058"-.0062" 15020R6 42320-1 55 ft./lbs..0063"-.0067" 15022 42350-1 60 ft./lbs..0058"-.0062" 15022R6 42320-1 55 ft./lbs..0063"-.0067" 15024 42350-1 60 ft./lbs..0058"-.0062" 15024R6 42320-1 55 ft./lbs..0063"-.0067" 15027 42350-1 60 ft./lbs..0058"-.0062" 15027R6 42320-1 55 ft./lbs..0063"-.0067" 15029 42350-1 60 ft./lbs..0058"-.0062" 15029R6 42320-1 55 ft./lbs..0063"-.0067" 15032 42350-1 60 ft./lbs..0058"-.0062" 15032R6 42320-1 55 ft./lbs..0063"-.0067" Manley Lube 40172 1 oz. Manley Rod Bolt Assembly Lube Important excerpt from the ARP catalog regarding proper fastener installation: The importance of tightening fasteners to their required preload cannot be emphasized enough. If a fastener is not tightened properly, the fastener will not apply the required preload on the application it is being used for and may become susceptible to failure. Conversely, if a fastener is over tightened and stretched too much, it becomes susceptible to failure by exceeding it s maximum yield point. Manley Performance uses ARP connecting rod bolts exclusively and is proud to be an ARP Performance Partner. 162 PHONE: 732.905.3366 FAX: 732.905.3010

STEEL Pro Series Turbo Tuff I-Beam & Tri-Beam Rods Replacement Bolts and Specifications Connecting Recommended Recommended Connecting Recommended Recommended Rod Bolt Torque Bolt Stretch Rod Bolt Torque Bolt Stretch Part No. Part No. w/ Manley Lube w/ Manley Lube Part No. Part No. w/ Manley Lube w/ Manley Lube 14400 42351-1 50 ft./lbs..0058"-.0062" 14400R6 42321-1 55 ft./lbs..0065"-.0075" 14401 42351-1 50 ft./lbs..0058"-.0062" 14401R6 42321-1 55 ft./lbs..0065"-.0075" 14402 42351-1 50 ft./lbs..0058"-.0062" 14402R6 42321-1 55 ft./lbs..0065"-.0075" 14402TB 42351-1 50 ft./lbs..0058"-.0062" 14402TBR6 42321-1 55 ft./lbs..0065"-.0075" 14403 42351-1 50 ft./lbs..0058"-.0062" 14403R6 42321-1 55 ft./lbs..0065"-.0075" 14404 42351-1 50 ft./lbs..0058"-.0062" 14404R6 42321-1 55 ft./lbs..0065"-.0075" 14405 42351-1 50 ft./lbs..0058"-.0062" 14405R6 42321-1 55 ft./lbs..0065"-.0075" 14406 42350-1 50 ft./lbs..0058"-.0062" 14406R6 42320-1 55 ft./lbs..0063"-.0067" 14407 42351-1 50 ft./lbs..0058"-.0062" 14407R6 42321-1 55 ft./lbs..0065"-.0075" 14408 42351-1 50 ft./lbs..0058"-.0062" 14408R6 42321-1 55 ft./lbs..0065"-.0075" 14409 42350-1 50 ft./lbs..0058"-.0062" 14409R6 42320-1 55 ft./lbs..0063"-.0067" 14410 42350-1 50 ft./lbs..0058"-.0062" 14410R6 42320-1 55 ft./lbs..0063"-.0067" 14411 42351-1 50 ft./lbs..0058"-.0062" 14411R6 42321-1 55 ft./lbs..0065"-.0075" 14412 42351-1 50 ft./lbs..0058"-.0062" 14412R6 42321-1 55 ft./lbs..0065"-.0075" 14413 42351-1 50 ft./lbs..0058"-.0062" 14413R6 42321-1 55 ft./lbs..0065"-.0075" 14414 42351-1 50 ft./lbs..0058"-.0062" 14414R6 42321-1 55 ft./lbs..0065"-.0075" 14415 42351-1 50 ft./lbs..0058"-.0062" 14415R6 42321-1 55 ft./lbs..0065"-.0075" 14416 42351-1 50 ft./lbs..0058"-.0062" 14416R6 42321-1 55 ft./lbs..0065"-.0075" 14417 42351-1 50 ft./lbs..0058"-.0062" 14417R6 42321-1 55 ft./lbs..0065"-.0075" 14418 42351-1 50 ft./lbs..0058"-.0062" 14418R6 42321-1 55 ft./lbs..0065"-.0075" 14419 42351-1 50 ft./lbs..0058"-.0062" 14419R6 42321-1 55 ft./lbs..0065"-.0075" 14420 42351-1 50 ft./lbs..0058"-.0062" 14420R6 42321-1 55 ft./lbs..0065"-.0075" 14421 42351-1 50 ft./lbs..0058"-.0062" 14421R6 42321-1 55 ft./lbs..0065"-.0075" 14422 42351-1 50 ft./lbs..0058"-.0062" 14422R6 42321-1 55 ft./lbs..0065"-.0075" 14423 42350-1 50 ft./lbs..0058"-.0062" 14423R6 42320-1 55 ft./lbs..0063"-.0067" 14424/TB 42384-1 95 ft./lbs..0064"-.0068" - - - - - - - - - - - - - - - - - - - - - - - - 14426 42351-1 50 ft./lbs..0058"-.0062" 14426R6 42321-1 55 ft./lbs..0065"-.0075" 14427 42390-1 75 ft./lbs..0050"-.0060" 14427R6 42252-1 95 ft./lbs..0060"-.0065" 14428 42390-1 75 ft./lbs..0050"-.0060" 14428R6 42252-1 95 ft./lbs..0060"-.0065" 14430 42350-1 50 ft./lbs..0058"-.0062" 14430R6 42320-1 55 ft./lbs..0063"-.0067" 14431 42350-1 50 ft./lbs..0058"-.0062" 14431R6 42320-1 55 ft./lbs..0063"-.0067 " 14432 42350-1 50 ft./lbs..0058"-.0062" 14432R6 42320-1 55 ft./lbs..0063"-.0067" 14433 42350-1 50 ft./lbs..0058"-.0062" 14433R6 42320-1 55 ft./lbs..0063"-.0067" 14434 42350-1 50 ft./lbs..0058"-.0062" 14434R6 42320-1 55 ft./lbs..0063"-.0067" 14435TB 42351-1 50 ft./lbs..0058"-.0062" 14435TBR6 42321-1 55 ft./lbs..0065"-.0075" 14436 42351-1 50 ft./lbs..0058"-.0062" 14436R6 42321-1 55 ft./lbs..0065"-.0075" 15403 42351-1 50 ft./lbs..0058"-.0062" 15403R6 42321-1 55 ft./lbs..0065"-.0075" 15424/TB 42384-1 95 ft./lbs..0064"-.0068" - - - - - - - - - - - - - - - - - - - - - - - - 15524 42384-1 95 ft./lbs..0064"-.0068" - - - - - - - - - - - - - - - - - - - - - - - - Manley Lube 40172 1 oz. Manley Rod Bolt Assembly Lube WWW.MANLEYPERFORMANCE.COM 163