A MANLEY VALVE FOR EVERY APPLICATION CHOOSE FROM ONE OF FIVE SERIES OF STAINLESS VALVES EXHAUST VALVE TEMPERATURE RANGE CHART
|
|
- Philip Barber
- 7 years ago
- Views:
Transcription
1 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY STAINLESS A MANLEY VALVE FOR EVERY APPLICATION CHOOSE FROM ONE OF FIVE SERIES OF STAINLESS PERFORMANCE SERIES 3 Stainless Steel ( XH-422 Exhaust and NK-840 Intake ) 3 Stock and.100" Longer Lengths Available STREET SERIES 3 Stainless Steel ( XH-424 Exhaust and NK-841 Intake ) 3 Street Master ( Straight Stem ) and Street Flo Shapes Available RACE SERIES 3 Stainless Steel ( XH-426 Exhaust and NK-842 Intake ) 3 Race Master ( Straight Stem ) and Race Flo Shapes Available 3 Recommended Exhaust Valves for Alcohol Engines SEVERE DUTY SERIES 3 Superior Stainless for High Temperature Gasoline Engines 3 Exhaust Material XH-428 with Double the Ultimate Tensile Strength ( at 1500 F ) over the competition 3 Intake Material NK-844 with 1000 Times Better Fatigue Strength than competitors offerings. EXTREME DUTY SERIES 3 Top Fuel, Funny Car and Marine Engine Exhaust Valves 3 More Hot Hardness and High Temperature Strength than any competitive offerings 3 XH-432 XtremeAlloy EXHAUST VALVE TEMPERATURE RANGE CHART 900 F 1000 F 1100 F 1200 F 1300 F 1400 F 1500 F RACE SERIES SEVERE DUTY SERIES Temperatures at pyrometer 1" in header. EXTREME DUTY SERIES 3
2 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: Manley Performance is universally acknowledged as the leading manufacturer of performance and racing valves in the world. The reason for Manley s overwhelming success is simple: QUALITY. We offer the best materials in the industry - exclusive materials our competitors do not possess. Our stems are hard coated with.0002" thick chrome rather than a few millionths of flash. Our hard tips are superior to competitors puddled stellite which can crack and erode off the stem. Our valve head and underhead shapes have been in the forefront of the quest for improved flow since the late 1960 s. And always each Manley valve has been price targeted to specific markets to ensure the best possible value to the customer. A P P L I E D S T R E S S K S I SEVERE DUTY EXHAUST VALVE FATIGUE CURVES AT 1400 F 10,000 MANLEY XH-428 COMPETITORS EV-8, 21-4N 100,000 1,000,000 10,000, ,000,000 CYCLES TO FAILURE / ENDURANCE LIMITS EXHAUST VALVE ULTIMATE TENSILE STRENGTH (1500ºF) 70,000 PSI 60,000 PSI 50,000 PSI 40,000 PSI 30,000 PSI MANLEY XH-428 MANLEY XH-426 EV-8 RACE MASTER Race Master, and the Pro Flo versions identified as Race Flo valves, are manufactured of XH-426 material for the exhausts and NK-842 for the intakes. This series of valves is targeted at the bracket, drag and oval track racers operating below 8000 rpm - above which engine speed titanium is required. Any engine builder successfully using EV-8 alloy ( 21-4N ) valves will find in this series of Manley valves a superior piece at a most attractive price. The Ultimate Tensile Strength charts on this page and the next, show the Manley Race Series to be equal to the best that the competitors have to offer. 0.0 PERFORMANCE & STREET SERIES Designed for the enthusiast preparing a stock or mildly modified street engine, or a bracket racer seeking maximum value for his dollar, the Performance or Street Series valves are the perfect choice. These dependable valves are also offered in Street Flo versions providing significant flow gains without head porting. All valves in both these series feature chrome stems, hard tips, swirl polished underhead areas, and fully machined combustion faces. A P P L I E D S T R E S S K S I SEVERE DUTY INTAKE VALVE FATIGUE CURVES AT 1000 F 10,000 MANLEY NK-844 COMPETITORS EV-8, 21-4N 100,000 1,000,000 10,000, ,000,000 CYCLES TO FAILURE / ENDURANCE LIMITS 4
3 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY STAINLESS SEVERE DUTY The Severe Duty series of valves is the Manley signature in the performance and racing industry. Exhaust material XH-428 and intake material NK-844 is offered by no competitor in the world. And no pair of materials show such clear dominance over all others. Ultimate tensile strength of XH-428 at 1500 F is nearly double the competitors EV-8. At 1000 F the Manley NK-844 displays more than four times the ultimate tensile of the competition s best intake material. The accompanying graph illustrates the complete superiority of our exotic steels over our own XH-428 as well as competitor s EV-8. HOT HARDNESS B.H.M HOT HARDNESS STRENGTH OF MANLEY "EXOTIC" EXHAUST MATERIALS MANLEY XH-430 (INCONEL), XH-432 (XtremeAlloy) INTAKE VALVE ULTIMATE TENSILE STRENGTH (1000ºF) 150,000 PSI 120,000 PSI MANLEY NK MANLEY XH-428 MANLEY XH TEMPERATURE 90,000 PSI 60,000 PSI 30,000 PSI 0.0 MANLEY NK-842 EV-8 Further proof of the superiority of the Manley Severe Duty valves is evident in our comprehensive fatigue tests. In normal operation where valve float is non-existent, a valve will experience 20,000 to 25,000 lbs of applied stress. However, when valves bounce on the seat the stress immediately soars to 40,000 to 60,000 lbs. Manley exhaust valves (at 40,000 psi and 1400 F) ran to 100,000,000 (one hundred million) cycles while competitors offerings failed at 100,000 cycles. That s 1000 times better fatigue life In addition to the vastly superior strength and fatigue characteristics of Manley NK-844, our exclusive intake material exhibits an uncanny ability to resist chordal fractures. In an excellent sealing combustion chamber, the intake valve is actually deformed by the fuel explosion and pushed up into the port. The effect of this continuous deformation on competitors material eventually is a chordal fracture propagating from the circumference of the valve and quickly becoming a missing pie shaped piece. Manley NK-844 is the absolute best choice of material to combat disastrous chordal fractures. EXTREME DUTY Top Fuel and Funny Car drag racers, Big Block Chevy marine enthusiasts, and Small Block Chevy restricted carburetor circle track competitors will all benefit by the use of Inconel and XtremeAlloy exhaust valves. Exotic steel is required simply because of the enormous heat imposed on the exhaust valves in these applications. The illustration above shows an intake valve seated in the head with normal shape. The right illustration shows the valve being deformed under high combustion pressure. 5
4 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: THE PRO FLO SHAPE A MANLEY ORIGINAL 3 Up to 40% flow increase in small port OE style cylinder heads 3 Proven performance improvement on the flow bench Test for: Hot Rod Magazine Tests performed by: Edelbrock Type of cylinder head: 1969 Camaro AMOUNT OF INTAKE EXHAUST NET VALVE IMPROVEMENT IMPROVEMENT LIFT IN FLOW IN FLOW.150" 42% 93%.200" 37% 27%.250" 25% 23%.300" 12% 22%.350" 7% 19%.400" 5% 14% AVAILABLE IN THREE SERIES OF Series Street Race Severe Duty Pro Flo Designation Street Flo Race Flo Pro Flo STAINLESS STEEL & TITANIUM VALVE BUYERS GUIDE Valve Type Replacement and Mild Street Performance Engine Builders Using EV-8 High Perf Street Bracket Racers Oval Track Sportsman Racers Naturally Aspirated Alcohol Burning Engines Drag Racing Over 8000 RPM Offshore Powerboat and Hi Performance Marine Sprint Car Dirt Late Model Performance Series Acceptable Street Series Preferred Race Series Extra Insurance Acceptable Preferred Exhaust When Titanium is Not Allowed Not Recommended Severe Duty Preferred Preferred Intake When Titanium is Not Allowed Required Intake Extreme Duty Preferred with Restricted Carburetor Top Fuel Funny Car Exhaust Only Required Exhaust Titanium Preferred Required Other Than Top Fuel or Funny Car Race Only Required 6
5 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY STAINLESS BUICK V-6 STAGE 1 and PRODUCTION CAST IRON HEADS SEVERE DUTY 3 XH-428 Exhaust Material 3 NK-844 Intake Material 3 Swirl Polished and Machined 3 Intakes are Pro Flo for Improved Flow Exh Stock x 7/16" Dish Int Stock Pro Flo: 12 x 3/8" Dish Int Stock Pro Flo: 12 x 3/8" Dish 97 OLDSMOBILE SEVERE DUTY 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material 3 Hard Tips 3 Swirl Polished 3 Chrome Stems 3 Fully Machined Head Stem Installed O / A Tip Underhead Seat Top of Part No. Type Diameter Diameter Height Length Length Angle / Radius Margin Width Head Exh Stock x 3/8" Dish Int Stock x 3/8" Dish PONTIAC RACE MASTER & RACE FLO 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material Head Stem Installed O / A Tip Underhead Seat Top of Part No. Type Diameter Diameter Height Length Length Angle / Radius Margin Width Head Exh Stock x 3/8" Dish Exh Stock x 3/8" Dish Exh Stock x 3/8" Dish Int Stock Pro Flo 12 x 3/8" Dish Int Stock Pro Flo 12 x 3/8" Dish Valves and fit Edelbrock 72cc cylinder heads. Both intakes have 30 seats. Need a different length? Head diameter not listed? See pages 42 & 43 for Gen II blanks to construct a valve to your exact specifications. 7
6 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: LS-1 / LS-2 (LS-6 HEAD) SMALL BLOCK CHEVY RACE FLO / RACE MASTER 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Swirl Polished and Machined 3 Intakes are Pro Flo for Improved Flow 3 O.E. Style Radius Keeper Grooves Part No. Type Diam. Diameter Height Length Length Angle / Radius Margin Width Head Grams Exh Stock x 7/16" Dish Exh Stock x 7/16" Dish Exh Stock x 7/16" Dish Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 91 Hollow Stem Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 93 Hollow Stem Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 94 Hollow Stem Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 95 Hollow Stem Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 97 Hollow Stem SEVERE DUTY / PRO FLO 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material 3 Swirl Polished and Machined 3 Intakes are Pro Flo for Improved Flow 3 O.E. Style Radius Keeper Grooves NEW Part No. Type Diam. Diameter Height Length Length Angle / Radius Margin Width Head Grams Exh Stock x 7/16" Dish Exh Stock x 7/16" Dish Exh Stock x 7/16" Dish Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 95 Hollow Stem Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 96 Hollow Stem Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 98 Hollow Stem EXTREME DUTY EXHAUST 3 XH-432 XtremeAlloy Material 3 Swirl Polished and Machined NEW Part No. Type Diam. Diameter Height Length Length Angle / Radius Margin Width Head Grams Exh Stock x 7/16" Dish Exh Stock x 7/16" Dish 92 8
7 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY STAINLESS LS-3 / L-99 (L-92 HEAD) SMALL BLOCK CHEVY RACE FLO / RACE MASTER 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Swirl Polished and Machined 3 Intakes are Pro Flo for Improved Flow 3 O.E. Style Radius Keeper Grooves Part No. Type Diam. Diameter Height Length Length Angle / Radius Margin Width Head Grams Exh Stock x 7/16" Dish Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 108 Hollow Stem SEVERE DUTY / PRO FLO 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material 3 Swirl Polished and Machined 3 Intakes are Pro Flo for Improved Flow 3 O.E. Style Radius Keeper Grooves NEW Part No. Type Diam. Diameter Height Length Length Angle / Radius Margin Width Head Grams Exh Stock x 7/16" Dish Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 109 Hollow Stem EXTREME DUTY EXHAUST 3 XH-432 XtremeAlloy Material 3 Swirl Polished and Machined NEW Part No. Type Diam. Diameter Height Length Length Angle / Radius Margin Width Head Grams Exh Stock x 7/16" Dish 94 LS-7 SMALL BLOCK CHEVY SEVERE DUTY / PRO FLO 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material 3 Swirl Polished and Machined 3 Intakes are Pro Flo for Improved Flow 3 O.E. Style Radius Keeper Grooves NEW Part No. Type Diam. Diameter Height Length Length Angle / Radius Margin Width Head Grams Exh Stock x 7/16" Dish Int Stock Pro Flo: 12 x 3/8" Dish H-8 Int Stock Pro Flo: 12 x 3/8" Dish 110 Hollow Stem EXTREME DUTY EXHAUST 3 XH-432 XtremeAlloy Material 3 Swirl Polished and Machined NEW Part No. Type Diam. Diameter Height Length Length Angle / Radius Margin Width Head Grams Exh Stock x 7/16" Dish 103 9
8 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: SMALL BLOCK CHEVROLET BUDGET REPLACEMENT 3 XH-422 Stainless Exhaust Material 3 NK-840 Stainless Intake Material 3 Original Underhead Shapes and Finishes Exh Stock Stock Dimple Exh Stock Stock Dimple Int Stock Stock Dimple Int Stock Stock Flat Face 117 SMALL BLOCK CHEVROLET BUDGET PERFORMANCE 3 XH-422 Stainless Exhaust Material 3 NK-840 Stainless Intake Material Exh Stock x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Int Stock x 3/8" Dish Int Stock x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish
9 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY STAINLESS SMALL BLOCK CHEVROLET STREET FLO 3 XH-424 Stainless Exhaust Material 3 NK-841 Stainless Intake Material 3 Increased Flow with Pro Flo Underhead Exh Stock Pro Flo: 12 x 3/8" Dish Exh Stock Pro Flo: 12 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish 109 The will work on the new Chevy Vortec Bowtie cylinder head casting number IC and IC. See page 3 for a description of our valve materials. SMALL BLOCK CHEVROLET STREET MASTER 3 XH-424 Stainless Exhaust Material 3 NK-841 Stainless Intake Material 3 Straight Stems Exh Stock x 1/2" Dish Exh Stock x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Int Stock x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish 112 The will work on the new Chevy Vortec Bowtie cylinder head casting number IC and IC. See page 3 for a description of our valve materials. 11
10 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: SMALL BLOCK CHEVROLET RACE FLO 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Increased Flow with Pro Flo Underhead Exh Stock Pro Flo: 12 x 3/8" Dish Exh Stock Pro Flo: 12 x 3/8" Dish Exh Stock Pro Flo: 12 x 3/8" Dish Exh Longer Pro Flo: 15 x 1/2" Dish Exh Longer Pro Flo: 15 x 1/2" Dish Exh Longer Pro Flo: 15 x 1/2" Dish Exh Longer Pro Flo: 15 x 1/2" Dish Exh Longer Pro Flo: 15 x 1/2" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 12 x 3/8" Dish Int Stock Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Stock Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Stock Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish 120 Exhaust valves 11501, 11521, 11565, and intake valves 11500, 11522, 11566, and have a Pro Flo start 1.400" from the head. All others have a Pro Flo start of 1.600" from the head. See page 3 for a description of our valve materials. Note: New part numbers are ITALICIZED. Need a different length? Head diameter not listed? See pages 42 & 43 for Gen II blanks to construct a valve to your exact specifications. 12
11 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY STAINLESS SMALL BLOCK CHEVROLET RACE MASTER 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Straight Stems Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish 138 See page 3 for a description of our valve materials. Need a different length? Head diameter not listed? See pages 42 & 43 for Gen II blanks to construct a valve to your exact specifications. 13
12 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: SMALL BLOCK CHEVROLET RACE MASTER 5/16" (.311" ) STEM 3 No Need for Inserted Tips or Wear Caps 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Thin Stem for Increased Flow and Light Weight These.311" stem valves are ONLY available with Bead Loc keeper grooves. Bead Loc valve locks are REQUIRED Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish 113 Dodge 5.9 L, 360 CID Magnum Series engines can use exhaust valves and intake valves with aftermarket locks and retainers. RPMS AND THIN STEM Use of the thin stem valves listed on pages 14, 15, and 25 will enable an engine to achieve higher rpm levels. Strict vigilance must be maintained to keep the engine from rpm s that cause valve float. When valves float ( bounce on the seat ) the stresses rapidly increase and the fatigue life of the valves is dramatically reduced. These valves are heavier than titanium and require additional spring pressure to operate at comparable rpm ranges. To help the engine avoid a valve float condition, purchase - and maintain - the best valve springs available. Use lightweight titanium retainers and titanium valve locks. Use quality pushrods. Operate the engine within predetermined rpm limits. ROCKERS AND THIN STEM When using Chevrolet valves with stem sizes 5/16" or less in diameter as listed on pages 14, 15 and 25, it is advised to use a shaft type rocker which keeps the rocker tip basically centered on the valve. If increased tip area is needed, utilize a wear cap, but be cognizant of the fact that the cap adds to the weight of the valve train thus reducing the rpm potential of the engine. Note: New part numbers are ITALICIZED. Need a different length? Head diameter not listed? See pages 42 & 43 for Gen II blanks to construct a valve to your exact specifications. 14
13 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY SMALL BLOCK CHEVROLET SEVERE DUTY 5/16" (.311" ) STEM 3 No Need for Inserted Tips or Wear Caps 3 XH-428 Stainless Material 3 NK-844 Stainless Intake Material 3 Thin Stem for Increased Flow and Light Weight Hollow.311" stem Gen II blank P/N 11224H can be found on page 42 to support your custom requirements. STAINLESS These.311" stem valves are ONLY available with Bead Loc keeper grooves. Bead Loc valve locks are REQUIRED Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish H-8 Int Longer x 3/8" Dish 98 Hollow Stem Int Longer x 3/8" Dish H-8 Int Longer x 3/8" Dish 100 Hollow Stem Int Longer x 3/8" Dish H-8 Int Longer x 3/8" Dish 100 Hollow Stem Int Longer x 3/8" Dish H-8 Int Longer x 3/8" Dish 101 Hollow Stem See page 14 for information about rpm limitations and rocker arms. SMALL BLOCK CHEVROLET SEVERE DUTY 7 mm (.274" ) STEM 3 No Need for Inserted Tips or Wear Caps 3 XH-428 Stainless Material 3 NK-844 Stainless Intake Material 3 Thin Stem for Increased Flow and Light Weight These.274" stem valves are ONLY available with Bead Loc keeper grooves. Bead Loc valve locks are REQUIRED Exh Longer x 1/2" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish 100 See page 14 for information about rpm limitations and rocker arms. Need a different length? Head diameter not listed? See pages 42 & 43 for Gen II blanks to construct a valve to your exact specifications. Note: New part numbers are ITALICIZED. 15
14 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: SMALL BLOCK CHEVROLET SEVERE DUTY EXHAUST 3 XH-428 Stainless Material 3 Chrome Stems 3 Hard Tips 3 Swirl Polished 3 Fully Machined Exh Stock x 3/8" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 3/8" Dish Exh Stock x 3/8" Flat Face Exh Longer x 3/8" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish 122 See page 3 for a description of our valve materials. Need a different length? Head diameter not listed? See pages 42 & 43 for Gen II blanks to construct a valve to your exact specifications. 16
15 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY STAINLESS SMALL BLOCK CHEVROLET SEVERE DUTY INTAKE 3 NK-844 Stainless Material 3 Chrome Stems 3 Hard Tips 3 Swirl Polished 3 Fully Machined Want a hollow stem Severe Duty intake? It s as easy as Refer to Gen II blank P/N 11254H on page 42 to support your custom requirements Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Stock x 3/8" Flat Face Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Flat Face Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish 137 See page 3 for a description of our valve materials. Need a different length? Head diameter not listed? See pages 42 & 43 for Gen II blanks to construct a valve to your exact specifications. Note: New part numbers are ITALICIZED. 17
16 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: SMALL BLOCK CHEVROLET SEVERE DUTY PRO FLO 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material 3 Improved Flow with Pro Flo Underhead Exh Stock Pro Flo: 12 x 3/8" Dish Exh Longer Pro Flo: 12 x 3/8" Dish Int Stock Pro Flo: 12 x 3/8" Dish Int Stock Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Stock Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Stock Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish Int Longer Pro Flo: 12 x 3/8" Dish 121 SMALL BLOCK CHEVROLET SEVERE DUTY LEGAL NHRA SUPER STOCK 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material Exh Stock x 3/8" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish
17 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY STAINLESS SMALL BLOCK CHEVROLET EXTREME DUTY EXHAUST 3 XH-432 XtremeAlloy Material Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish 113 See page 3 for a description of our valve materials. 409 CHEVROLET RACE MASTER 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Straight Stems Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Stock x 1/2" Dish Exh Stock x 1/2" Dish Int Stock x 3/8" Dish Int Stock x 3/8" Dish 141 Need a different length? Head diameter not listed? See pages 42 & 43 for Gen II blanks to construct a valve to your exact specifications. 19
18 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: BIG BLOCK CHEVROLET STREET FLO STOCK 3/8" STEM DIAMETERS 3 XH-424 Stainless Exhaust Material 3 NK-841 Stainless Intake Material 3 Improved Flow with Pro Flo Underhead Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Stock Pro Flo: 10 x 3/8" Dish Exh Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish 138 BIG BLOCK CHEVROLET RACE FLO STOCK 3/8" STEM DIAMETER 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 Improved Flow with Pro Flo Underhead Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Stock Pro Flo: 10 x 3/8" Dish Exh Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish
19 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY STAINLESS BIG BLOCK CHEVROLET RACE MASTER STOCK 3/8" STEM DIAMETER 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish 158 See page 3 for a description of our valve materials. BIG BLOCK CHEVROLET SEVERE DUTY STOCK 3/8" STEM DIAMETERS 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material Want a hollow stem Severe Duty intake? It s as easy as Refer to Gen II blank P/N 11252H on page 42 to support your custom requirements. Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Stock x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Stock x 3/8" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish 171 See page 3 for a description of our valve materials. 21
20 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: BIG BLOCK CHEVROLET SEVERE DUTY PRO FLO STOCK 3/8" STEM DIAMETERS 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material 3 Improved Flow with Pro Flo Underhead Want a hollow stem Severe Duty intake? It s as easy as Refer to Gen II blank P/N 11252H on page 42 to support your custom requirements. Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Stock Pro Flo: 10 x 3/8" Dish Exh Stock Pro Flo: 10 x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish 171 See page 3 for a description of our valve materials. BIG BLOCK CHEVROLET EXTREME DUTY & MARINE STOCK 3/8" STEM DIAMETERS 3 XH-432 XtremeAlloy Exhaust Material 3 NK-844 Intake Material Want a hollow stem Severe Duty intake? It s as easy as Refer to Gen II blank P/N 11252H on page 42 to support your custom requirements. Part No. Type Head Diameter Stem Diameter Installed Height O/A Length Tip Length Underhead Angle/Radius Margin Seat Width Top of Head Wgt/ Grams Exh. Exh Stock.100 Longer x 3/8" 10 x 3/8" Dish 6 Dish Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Exh Longer x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Stock x 3/8" Dish Int Stock Pro Flo: 10 x 3/8" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Stock x 3/8" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish Int Longer Pro Flo: 12 x 7/16" Dish 171 See page 3 for a description of our valve materials. 22
21 1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY BIG BLOCK CHEVROLET RACE MASTER 11/32" STEM DIAMETER STAINLESS 3 XH-426 Stainless Exhaust Material 3 NK-842 Stainless Intake Material 3 11/32" Stems for Improved Flow, Lighter Weight Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Stock x 3/8" Dish Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Exh Longer x 3/8" Dish Exh Stock x 3/8" Dish Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Exh Longer x 3/8" Dish Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish 147 BIG BLOCK CHEVROLET SEVERE DUTY 11/32" STEM DIAMETERS 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Exh Longer x 3/8" Dish Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Exh Longer x 3/8" Dish Exh Stock x 3/8" Dish Exh Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish
22 STAINLESS MANLEY PERFORMANCE PRODUCTS, INC. PHONE: FAX: BIG BLOCK CHEVROLET EXTREME DUTY & MARINE 11/32" STEM DIAMETERS 3 XH-432 XtremeAlloy Exhaust Material 3 NK-844 Stainless Intake Material 3 Reduced Stem Diameter 3 Greater Flow and Less Weight Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Stock x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish Exh Stock x 1/2" Dish Exh Stock x 1/2" Dish Exh Longer x 1/2" Dish Exh Longer x 1/2" Dish 140 Gen II blank P/N is also available with an 18 back angle, flat face (no dish). Refer to page Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Stock x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish 152 BIG BLOCK CHEVROLET BRODIX BB-4/SAR, EDELBROCK VICTOR CHEVROLET # HEADS SEVERE DUTY 11/32" STEMS 3 XH-428 Stainless Exhaust Material 3 NK-844 Stainless Intake Material Head Stem Installed O/A Tip Underhead Seat Top of Wgt/ Part No. Type Diameter Diameter Height Length Length Angle/Radius Margin Width Head Grams Exh Longer x 3/8" Dish Exh Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish Int Longer x 3/8" Dish 150 Note: New part numbers are ITALICIZED. 24
A MANLEY VALVE FOR EVERY APPLICATION C H O O S E F R O M O N E O F F I V E S E R I E S O F S T A I N L E S S V A L V E S
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 STAINLESS A MANLEY VALVE FOR EVERY APPLICATION C H O O S E F R O M O N E O F F I V E S E R I E S O F S T A I N L E S S V A L V E S PERFORMANCE SERIES 3
More informationSTAINLESS VALV A MANLEY VALVE FOR EVERY APPLICATION CHOOSE FROM ONE OF FIVE SERIES OF STAINLESS VALVES
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 STAINLESS VALV A MANLEY VALVE FOR EVERY APPLICATION CHOOSE FROM ONE OF FIVE SERIES OF STAINLESS V BUDGET SERIES: REPLACEMENT VALV Stainless Steel ( XH-422
More information* Provided that the overall length is within the minimum length parameter of the Gen II blank that is machined.
PLEASE SEE GEN II CUSTOM VALVE SPECIFICATIONS PAGES 42 & 43 CUSTOMER NAME CUSTOMER SIGNATURE DATE By signing this form I accept the goods are nonreturnable for credit and that Manley takes no responsibility
More informationPart No. Quantity Description Diameter Length
PUSHRODS SMALL BLOCK CHEVROLET SWEDGED END PUSHRODS.080 WALL 1010 STEEL 3 Heat treated and black oxide finish 3 For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and
More informationPISTON SELECTION GUIDELINES Federal-Mogul Document #1104
PISTON SELECTION GUIDELINES Federal-Mogul Document #1104 There are several factors to consider when selecting pistons for a high performance application. Choices are made by comparing cost, design, material,
More informationPERFORMER ALUMINUM CYLINDER HEADS FE Ford V8s 390-427-428 #6005, #6006, #6007, & #6008 INSTALLATION INSTRUCTIONS
PERFORMER ALUMINUM CYLINDER HEADS FE Ford V8s 390-427-428 #6005, #6006, #6007, & #6008 INSTALLATION INSTRUCTIONS Please study these instructions carefully before installing your new cylinder heads. If
More informationRECOMMENDATIONS CONTROLLED VEHICLES: COMPRESSION RECOMMENDATIONS CONTROLLED VEHICLES: RATIO RECOMMENDATIONS RATIO: RECOMMENDATIONS
CAMSHAFT RANGE & SELECTION CHART SEE INDIVIDUAL LISTINGS FOR MORE INFORMATION NEED A GOOD TORQUE CAM? LOOK FOR THIS ICON IN THE LISTINGS STAGE 1 UP TO 200 HYDRAULIC SMOOTH STOCK IMPROVED LOW END, 1600-2000
More informationSLP 1.85 Ratio Offset Rocker Arms with Valve Springs, LS3
PART #50190 SLP 1.85 Ratio Offset Rocker Arms with Valve Springs, LS3 PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER
More informationAmerican Motors 290-401 V-8 1966-92
Our Falcon Performance camshaft kits provide great performance for everyday drivers to Street Machines to All-Out racers. Our CL kits include camshaft, lifters, and cam lube, but for a complete camshaft
More informationValves, Retainers & Springs
Valves, Retainers & Springs By Larry Carley New materials, improved designs and lower prices (at least for some valves). That pretty much sums up what's going on with valves, retainers and springs today.
More informationUnderstanding Valve Design and Alloys
Understanding Valve Design and Alloys By Doug Kaufman To the naked eye, a valve is a valve is a valve. Sure, there may be two, three, four or more of them in the cylinder head, but unless you have x-ray
More informationGeneral Motors (6 cylinder)
General Motors (6 cylinder) Atlas LL8 Vortec 4200 C6156xx Atlas LL8 Vortec 4200 C615641 1.50 C615642 1.63 C615643 1.75 2002-09 Trailblazer (Chevy) 2002-09 Envoy (GMC) 2002-04 Bravada (Olds) 2002-09 Renier
More informationSTREET SMALL BLOCK FORD
WORLD CLASS ENGINES 349, 371 & 427 With the advent of the new World Man O War replacement block for 289/302/351 Ford engines, it enabled the company to develop a series of highly desirable crate motors
More informationA Study of Durability Analysis Methodology for Engine Valve Considering Head Thermal Deformation and Dynamic Behavior
A Study of Durability Analysis Methodology for Engine Valve Considering Head Thermal Deformation and Dynamic Behavior Kum-Chul, Oh 1, Sang-Woo Cha 1 and Ji-Ho Kim 1 1 R&D Center, Hyundai Motor Company
More informationMonster Mini Stock Assn rules for 2015
Monster Mini Stock Assn rules for 2015 *note 2 engine combinations* BODY - stock auto only may have complete aluminum body inner panel may be removed rear of car must be closed - no holes or flaps to meet
More informationPERFORMER RPM CNC MACHINED CYLINDER HEADS For 1984 & Later Harley-Davidson Evolution Big Twin Engines. Catalog #1604, 1606, 1607, 1624, 16041 & 16061
PERFORMER RPM CNC MACHINED CYLINDER HEADS For 1984 & Later Harley-Davidson Evolution Big Twin Engines INSTALLATION INSTRUCTIONS PLEASE study these instructions carefully before beginning this installation.
More informationChapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
More informationFree piston Stirling engine for rural development
Free piston Stirling engine for rural development R. Krasensky, Intern, Stirling development, r.krasensky@rrenergy.nl W. Rijssenbeek, Managing director, w.rijssenbeek@rrenergy.nl Abstract: This paper presents
More informationLotus /Toyota 2ZZ. Performance Parts
Lotus /Toyota 2ZZ Performance Parts Engine Assemblies The Cosworth 2ZZ short and long block engine assemblies have gone through countless hours of engineering and evaluation to determine the best combination
More informationGEAROLOGY 2-1 SPUR GEARS SPUR GEARS
GEAROLOGY 2-1 2 2-2 GEAROLOGY COMMON APPLICATIONS: Spur gears are used to Now that you ve been introduced to both Boston Gear and some of the basics of our Gearology course which we like to call Power
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationSheet metal operations - Bending and related processes
Sheet metal operations - Bending and related processes R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Table of Contents 1.Quiz-Key... Error! Bookmark not defined. 1.Bending
More informationValve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationEngine Valve Designs By Ted Tunnecliffe
Engine Valve Designs By Ted Tunnecliffe Over the years, valve heads have come in all sizes and shapes. There has been everything from domed heads to flat heads to cupped heads. There have been many contours
More informationWorld Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
More informationICON FHR (Forged Head Relief) PISTONS
KB MOTORCYCLE PISTONS KB Performance pistons for Harley and Indian motorcycles are offered in Hypereutectic 390 alloy and Forged 4032 low expansion alloy. Our 4032 alloy is preferred for high performance
More informationEngine Bearing Materials
Engine Bearing Materials Dr. Dmitri Kopeliovich (Research & Development Manager) The durable operation of an engine bearing is achieved if its materials combine high strength (load capacity, wear resistance,
More informationEXHAUST SYSTEMS MAGNAFLOW SERIES STERN DRIVE EXHAUST SYSTEM
EXHAUST SYSTEMS MAGNAFLOW SERIES STERN DRIVE EXHAUST SYSTEM Glenwood s Magnaflow Series Stern Drive Exhaust System is a lightweight and affordable replacement for stock cast-iron MerCruiser, OMC and Volvo
More informationHP IN-LINE BILLET FUEL PUMPS
HP IN-LINE BILLET FUEL PUMPS Holley s HP In-Line Billet Fuel s are designed to be the perfect companion to your carbureted or fuel injected street vehicle, race car, off-road truck or any engine needing
More informationMASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
More informationUltrasonic Reference Blocks
Ultrasonic Reference Blocks Custom and Standard Test Blocks for Nondestructive Testing Introduction 3 IIW Type 1 Calibration Block 4 Miniature Angle Beam (ROMPAS) Calibration Block 4 Distance Calibration
More informationChrysler made the Hemi engine. BY DOUG ANDERSON, CONTRIBUTING EDITOR danderson@enginebuildermag.com
BY DOUG ANDERSON, CONTRIBUTING EDITOR danderson@enginebuildermag.com Chrysler made the Hemi engine famous. They didn t invent the hemispherical chamber, but they were the first to build an engine with
More information*Specify Oversize When Ordering
Cylinder Block Deck Cracks On Caterpillar 3208 Engines and Caterpillar explain how to inspect the Caterpillar 3208 engines for block cracks. Part No. Location Insert OD Size Depth Tapered ID 3906854 Intake
More informationLecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
More informationRING TYPE JOINT GASKETS
RING TYPE JOINT GASKETS 05.07 GLOBAL RESOURCE FLEXITALLIC, A WORLDWIDE ORGANIZATION LOCAL SERVICE COMMITTED TO MEETING CUSTOMER NEEDS COMPREHENSIVE PRODUCT RANGE FOR ALL INDUSTRIAL AND PETROCHEMICAL APPLICATIONS
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationEvolution of the Flathead Compiled by Fred Mills
Evolution of the Flathead Compiled by Fred Mills Here is the 221-239-255 cube U.S.A. flathead block story with pictures, to the best of my knowledge and ability to collect pictures so far. In the beginning
More informationMFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
More informationOldsmobile Engine Build - Milennium 403 Dick Miller Builds A Challenge-Worthy Olds
Oldsmobile Engine Build - Milennium 403 Dick Miller Builds A Challenge-Worthy Olds By Scott Parkhurst We've written on these very pages about the untapped potential within the 403 Olds. We've also made
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More informationSection 6 Brake Drum Failure Analysis. Brake Drum Wear Conditions. What is Normal Wear? What is Deep or Excessive Wear? WARNING. Deep, Uniform Wear
Section Brake Drum 6 Failure Analysis WARNING To prevent serious eye injury, always wear safe eye protection when you perform vehicle maintenance or service. Figure 6.1 ASBESTOS AND NON-ASBESTOS FIBERS
More informationPERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S 60619 60639 60659 60697 60715 60719 60735 60739 60759 60849 60859 60869 60879 60889
More informationMODEL J SERIES CONVERTER
3030 S Susan Street, MODEL J SERIES CONVERTER REPAIR KIT INSTRUCTIONS Important: Any maintenance, service or repair should be performed by trained and experienced service technicians. Proper tools and
More informationSFI SPECIFICATION 61.1 EFFECTIVE: FEBRUARY 26, 2014
SFI SPECIFICATION 61.1 EFFECTIVE: FEBRUARY 26, 2014 PRODUCT: Turbochargers 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating and
More informationPerformance Analysis of a. for a Diesel Engine
12 th GT-Suite User s Conference Performance Analysis of a Decompression Brake System for a Diesel Engine Ivan Miguel Trindade Vinicius J. M. Peixoto MWM International Motores November, 10th 2008 Presentation
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationWorld leaders in XK120 140 150 parts. for road, race or competition
World leaders in XK120 140 150 parts XK engine parts for road, race or competition Crankshaft, conrods and pistons 3.8 steel billet crankshaft Double counterweighted and machined to F1 tolerances. Many
More informationEDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES OUTCOME 2 ENGINEERING COMPONENTS TUTORIAL 1 STRUCTURAL MEMBERS
ENGINEERING COMPONENTS EDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES OUTCOME ENGINEERING COMPONENTS TUTORIAL 1 STRUCTURAL MEMBERS Structural members: struts and ties; direct stress and strain,
More information1 5 05-12 5 05-12. Additions, Revisions, or Updates
5 05-12 1 5 05-12 SUBJECT DATE Cylinder Head May 2012 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change DDC-SVC-MAN-0023 EPA04 MBE 4000 Cylinder Head Additional
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationBoston, Venice, Kodiak. Enviro Wood Fireplace Inserts
Boston, Venice, Kodiak Enviro Wood Fireplace Inserts Why buy an Enviro Wood Insert? Up to 84.7% Efficiency - EPA approved and up to 84.7% efficiency - Enviro makes highly efficient wood inserts to help
More informationDiesel Fuel Systems. Injection Nozzles
Diesel Fuel Systems Injection Nozzles Unit Terms Injection nozzle Nozzle, nozzle holder, valve, spring assembly Nozzle assembly Valve, body, and spray valve Orifice Small hole Pintle Valve which the end
More informationThe cylinder head bolts tightening stages have been updated as listed in Table 1.
NUMBER: 07 EPA04 MBE 4000-6 S.M. REF.: 1.2.2 ENGINE: MBE 4000 DATE: November 2007 SUBJECT: CYLINDER HEAD BOLTS TIGHTENING STAGES PUBLICATION: 6SE412 The cylinder head bolts tightening stages have been
More informationDevelopment of the High Speed 2ZZ-GE Engine
SAE TECHNICAL PAPER SERIES 2000-01-0671 Development of the High Speed 2ZZ-GE Engine Takasuke Shikida, Yoshikatsu Nakamura, Tamio Nakakubo and Hiroyuki Kawase Toyota Motor Corp. SAE 2000 World Congress
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationEdition 11/2007. www.desteklift.com
GLOBAL PLAYER IN GAS SPRINGS Gas spring production is a highly competitive market with only a few innovative, high quality manufacturers who can do the job right. Destek Gas Springs is one of the few.
More informationJIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More informationFRICTION MATERIALS & BONDING SERVICES
FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding
More information2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationORIFICE PLATES. CONCENTRIC BORE: For standard fluid conditions an Orifice Plate would have a centrally located orifice bore.
SUPERIOR PRODUCTS, INC. 20550 MADISON STREET, TORRANCE, CA 90503 ORIFICE PLATES MANUFACTURING STANDARDS: Superior Products manufactures Orifice Plates in strict accordance with the specifications of: AGA.,
More information2014 PRODUCT SPEC GUIDE
2014 PRODUCT SPEC GUIDE THE LIGHTWEIGHT INNOVATION LEADER INNOVATION IS IN OUR DNA This year, Alcoa is launching technology that s ready to shatter industry HEAVY-DUTY WITHOUT THE HEAVY. standards. But
More informationTires and Wheels. Tires and Wheels. Common Tire Terms. Determing Wheel Offset. Determing Bolt Pattern. Dual Wheel/Rim Spacing
ommon Tire Terms Section : Aspect Ratio: Range: Overall Diameter: Static Radius: Design : width of a tire in millimeters measured on a rim with optimal width. A dimensional relationship of the tire s section
More informationQuarry & Recycling Products
Quarry & Recycling Products CONTENTS Woven mesh screens Perforated screen plates Rubber & Polyurethane screens Walkways & Steps Ordering Information Further Information PAGE 3 6 8 9 10 11 Graepel has a
More informationIn the serious performance community, there s more
HIGH-PERFORMANCE BY VALVESJIM GIBSON Performance engine builders have a wide range of intake and exhaust valve choices. With so many valve materials and surface finishes available, it takes research to
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationNetShape - MIM. Metal Injection Molding Design Guide. NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807
Metal Injection Molding Design Guide NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807 Solon, OH 44139 solutions@netshapetech.com 1 Frequently Asked Questions Page What
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationRockets: Taking Off! Racing Balloon
Rockets: Taking Off! For every action there is an equal and opposite reaction. Rockets and Balloons What happens when you blow up a balloon then let it go? Does the balloon move through the air? Did you
More informationLet s look at an example of where grade 5 and grade 8 bolts are subjected to single shear loads (winch plate reference).
Bolt s I have been on a quite a few online email lists over the last 7 years or so, basically since they first came out. From the original Jeep-L list to the XJ-list to the Rockcrawler.com board, a common
More informationWEKO-SEAL Internal Joint Sealing WEKO-SEAL. internal pipe-joint sealing
WEKO-SEAL Internal Joint Sealing WEKO-SEAL internal pipe-joint sealing We know seals inside and out. Retaining Band Test Valve WEKO-SEAL WEKO-SEAL is the leading trenchless system for internally and economically
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More informationPiston Diagnosis A rough Guide
Piston Diagnosis A rough Guide The process of examining used pistons can tell us a lot of helpful information on the condition of an engine. When engine failure does occur the piston is likely to take
More informationTIG WELDING TIPS by Tom Bell
(This is a two-part document, with general tig welding first followed by one aluminum-specific.) TIG WELDING TIPS by Tom Bell 1. The bigger the rod, the easier it is to feed. Use larger diameter rods (3/32
More informationJIS G3445 Carbon steel tubes for machine structural purposes
JIS G3445 arbon steel tubes for machine structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for machinery, automobiles,
More informationFor exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.
For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. 2 0 0 5 D U K E A I R X C / S L / R A C E S E R V I C E G U I D E Information
More informationWhere to order engine kits The displacer cylinder CONTINUED
By Harry Walton OCUS sunlight on this model engine, and it runs at full speed, fueled by Fthe biggest nuclear reactor in the solar system the sun. Power is ample to drive a midget water pump or spin a
More informationThe word teamster today means a truck driver,
Page 47 Heron of Alexandria The word teamster today means a truck driver, but originally it meant a wagon driver, someone who drives a team of horses, mules or oxen. Over 2000 years ago teamsters in the
More information08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
More informationSignature and ISX CM870 Fuel System
Signature and ISX CM870 Fuel System Cummins Ontario Training Center HPI-TP Fuel System Heavy Duty High Pressure Injection - Time Pressure Fuel System The fuel system developed for the Signature and ISX
More informationM A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
More informationSeries 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationService Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
More informationAn Introduction to Spiral Retaining Ring Installation and Removal
An Introduction to Spiral Retaining Ring Installation and Removal FACTS AND FIGURES OF SPIRAL RETAINING RINGS Retaining Rings act as a removable shoulder on a shaft or in a bore. When installed in a groove,
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More informationAluminum Extrusion Guide
Aluminum Extrusion Guide There are two extrusion processes, direct and indirect. With direct, the ingot moves relative to the container wall; with indirect, the die moves. Under pressure, the ingot or
More informationIntroductory Study of Variable Valve Actuation for Pneumatic Hybridization
2007-01-0288 Introductory Study of Variable Valve Actuation for Pneumatic Hybridization Copyright 2007 SAE International Sasa Trajkovic, Per Tunestål and Bengt Johansson Division of Combustion Engines,
More informationCHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
More informationSPEED-PRO PISTON RINGS - DESIGN, FEATURES, and INSTALLATION GUIDELINES Federal-Mogul Document #1205
SPEED-PRO PISTON RINGS - DESIGN, FEATURES, and INSTALLATION GUIDELINES Federal-Mogul Document #1205 RADIAL THICKNESS All of the rings in the Speed-Pro line meet original equipment dimensions for proper
More informationAssembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
More informationCNC Ported Big Valve Cylinder Heads. Performance Intake Manifold. Forged Pistons (Engine set with rings, pins and clips)
Performance Engine Assemblies 20001721 2.0lt Performance Crate Engine 205BHP 20001722 2.0lt Performance Crate Engine 225BHP 20001723 2.0lt Performance Crate Engine 255BHP 20001725 2.3lt Performance Crate
More informationPneumatic Actuators. Crafted without compromise, to make your life easier. The Leader in Actuator Technology
Pneumatic Actuators Crafted without compromise, to make your life easier The Leader in Actuator Technology Early in his career, the founder of QTRCO, Ed Holtgraver, was responsible for field service of
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationINSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
More information