DAVID 3D Scanning
Scan size: 60 500 mm Resolution/Precision: Up to 0.1% of scan size (down to 0.06 mm) Scanning time: A single scan within a few seconds Mesh density: Up to 1,2000,000 vertices per scan Export formats: OBJ, STL, PLY Part No: 79012126 Order No: DAVID-SLS-2 SLS-2 Structured Light 3D Scanning System Structured Light Scanning Structured Light Scanning uses a video projector instead of a laser. Advantages: No calibraon plate is required during scanning. No manual laser movement. Much faster scanning. Turntable support available for fully-automated 360 scanning. Industrial camera with high quality lens Video projector with special lens for large focal range, including remote control USB drive with DAVID Pro Edition 3 software Sliding rail (aluminium) Camera slider High quality tripod Calibration panels printed on both sides for multiple scan volumes Printed instructions All necessary connecting cables Adapters for power supply Cable straps Standard-PC (32/64 bit - Windows XP, Vista, 7, 8) 3D graphics adapter Available VGA or HDMI port Two available USB ports Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor 630x340x230 mm Weight 9kg We recommend our SLS-2 hardware package. If you want to build your own scanner, please contact us for hardware recommendaons. - 2 -
Scan size: 10 300 mm Resolution/Precision: Down to 0.2 mm Scanning time: 10 60 sec Mesh density: Up to 1,000,000 vertices per scan Export formats: OBJ, STL, PLY DAVID-Laserscanner Pro Edition software on a USB Flash Drive High-resolution 2-megapixel webcam (full HD) with autofocus Stand for webcam Red line laser module (650nm, Class 1 laser) with adjustable focus, including battery Calibration panels (for object sizes up to 40 cm) Base plate for mounting the calibration panels Three right angles for fixing the calibration panels STARTER-KIT-2 Laserscanner Laser Scanning Part No: 79011662 Order No: STARTER-KIT-2 All you require is a video camera (e.g. webcam), a line laser (we offer suitable, costefficient laser modules), and a 90 calibraon plate as background. Standard-PC (32/64 bit - Windows XP, Vista, 7, 8) 3D graphics adapter Available VGA or HDMI port Two available USB ports Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor 440x328x86 mm Weight 2.86kg Our Starter-Kit-2 contains selected hardware and offers the best value for money of any 3D scanning system. If you want to build your own scanner, please contact us for hardware recommendaons. - 3 -
DAVID 3D SCANNER 3D Scanning Software Part No: 79012454 Order No: DAVID-4-PRO-USB Part No: 79012461 Order No: DAVID-4-PRO-UPGRADE Part No: 79010795 Order No: DL-3-PRO-USB DAVID 3D SCANNER E N T E R P R I S E DAVID 4 PRO and SOFTWARE DEVELOPMENT KIT Part No: 79012393 Order No: DAVID-4-EP-USB DAVID 4 PRO Features Same as DAVID 3 PRO, but Same as DAVID 3 PRO, but additionally: Turntable support Scan background filter Volume/surface area computing Upgrade only from 3 PRO to 4 PRO! DAVID 3 PRO Features Structured Light Scanning Laser Scanning Colour texturing Supports various projector/camera hardware Automated scan alignment 360 scan fusion SOFTWARE 260x162x93 mm Weight 0.14kg Standard-PC (32/64 bit - Windows Vista, 7, 8) 3D graphics adapter Available VGA or HDMI port One available USB port Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor Features Same as DAVID 4 PRO, but additionally: Mesh comparison Point-to-Point measurement SDK Features Automated scanning API: Two easy-to-use interfaces available (C++ and JSON/TCP) Server process must run on Windows Client software can be written in any programming language and runs on any operating system Including documentation and examples 260x162x93 mm Weight 0.19kg Standard-PC (32/64 bit - Windows Vista, 7, 8) 3D graphics adapter Available VGA or HDMI port One available USB port Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor DAVID 4 PRO - this soware allows inexpensive yet high quality 3D scanning of objects and surfaces. - 4 -
TT-1 Automatic Turntable DSL-1 Tabletop Support Part No: 79012430 Order No: DAVID-TT-1 222x290x330 mm Weight 2.8kg Part No: 79012492 Order No: DAVID-DSL-1 Lift range: 33 cm Tilt: 75 Pivoting: 360 Turn: 360 Material: Aluminium 400x300x200 mm Weight 4kg Lever Special scanner mount Table clamp DAVID TT-1 turntable Improve your scanning performance. With the portable DAVID TT-1 turntable; it makes 360 scanning with DAVID structured light scanners much easier. In combinaon with the DAVID 3D Scanner Soware (Version 4) it makes 360 scanning much easier. The objects to be scanned are simply placed on the TT-1 and you can rotate and scan automacally from different angles by using the DAVID 3D Scanner Soware. Operating voltage: 12V Operating current: 1000mA Supply voltage: 230V Dimensions: Ø 180x50 mm TT-1 Weight: 1.6kg Object weight: Up to 5kg RoHS: Yes Reach : Yes Material: Aluminium Housing potential: Isolated CE-Conformity: Yes DSL-1 tabletop support The new DAVID DSL-1 tabletop support, designed for mounting the SLS-2 structured light scanner solidly onto your desk, while keeping the desktop surface free for use. With the new DSL-1 you can mount the SLS-2 more easily ( for example at workstations) right on your table. The scanner is freely adjustable in every direction. No more trailing cables, no more tripping hazards - simply more performance. DAVID 3D SCANNER PRO 4 or ENTERPRISE/SDK Standard-PC (32/64 bit - Windows Vista, 7, 8) 3D graphics adapter Available VGA or HDMI port One available USB port Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor TT-1 Turntable with 3 level LED status display USB Cable Power Supply Adapters for power supply - 5 -
CP-SET02 High Quality Calibration Panels DAVID CAM-3.1-M Monochrome Camera Part No: 79011594 Order No: CP-SET02 460x330x60 mm Part No: 79012324 Order No: DAVID-CAM-3.1-M Weight 2.66kg 265x128x178 mm Weight 0.18kg High-precision float glass calibration panels 4 scales in 30, 60, 120 and 240 mm 2 high-precision 90 brackets Dimensions: 420x30x13 mm Dimensions mounted: 420x430x220 mm Panel material: Glass with special surface Bracket material: Fibreglass COATING SPRAY 500 Mattening Spray Part No: 79010771 Order No: COATING- SPRAY-500 215x240x140 mm Weight 2.75kg Camera USB CMOS Monochrome Camera with Lens Resolution: 1.3 Megapixels (1280x960) DAVID Firmware FPS: 25 Size: 58x95x50 mm Standard-PC (32/64 bit - Windows XP, Vista, 7, 8) 3D graphics adapter Available VGA or HDMI port One available USB port Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics processor - 6 -
SOFTWARE 360 Scanning In order to obtain an all-around scan of your object, you simply create single scans from different directions; the DAVID 3D Scanner software is able to align and fuse the scans into a textured 360-degree-model. The easiest and quickest method is by using our TT-1 turntable. The surface data can be exported in the following file formats.obj,.stl, and.ply. This rd allows you to import them into 3 party software for further processing, e.g. measurement, milling or 3D printing. Post-processing made easy The DAVID 4 PRO software is the base of the DAVID software family. Scans can be retouched, aligned and merged into a watertight 360 model with just a few clicks, after which they can be exported to common CAD formats (such as OBJ, STL and PLY), thereby enabling them to be imported into a wide variety of 3D programmes. The 3D data is stored to scale in mm, which makes it suitable for measurements, comparisons and 3D printing or CNC milling. ENTERPRISE / SDK Software package The top-of-the-range software package is the DAVID 4 ENTERPRISE version. Beside the well known DAVID features it offers you several measurement tools to make quality inspections. To automate those features, a main part of this version is DAVID SDK. It allows you to include DAVID into your own hardware/software environment. You can automate the scanning and analysis process, or wrap it into your own graphical user interface. Multiple scanners and client software can be distributed over various computers and operating systems, communicating via Ethernet or Internet. 3D scanning to your own requirements - Automated Scanning - Quality Inspection - Alignment - Fusion - and more! Applications Bin picking Quality inspection Batch scanning Own brand3d scanner, wrapped into your own GUI HARDWARE The SLS-2 - latest member of our successful scanner family This advanced model enhances the well proven structured light technology with significantly better handling. Never before it has been so easy to adjust a 3D scan system for scanning a wide range of objects of different features and sizes. The scanner is mobile and can easily be positioned in front of the surface to be scanned. A single click in the well proven DAVID software starts the scanning process and a few seconds later the digitised 3D model appears on the screen even the colours of the object can be optionally captured and reproduced in the resulting scan. You are able to scan all of the sides of the object in succession and subsequently render an enclosed 360 model. The 3D model can be exported to standard 3D file formats (such as OBJ, STL and PLY) and processed in other applications. Easy to handle The scanner system is delivered partially pre-assembled and can be set up in a few simple steps. When the scanner has been initially calibrated using the supplied calibration panels, all subsequent scans are performed easily with one mouse click each. The projector beams structured light patterns onto the scan object in a matter of seconds, which are detected by the camera and subsequently sent to the DAVID software. The DAVID software generates the 3D data immediately and displays it in the 3D viewer. This allows multiple views of the object to be scanned and saved in succession - all around, top and bottom as well as any shaded areas. Boundless possibilities Rapid prototyping, medical diagnostics, component testing and quality management, product presentations, forensics, archaeology and cultural heritage, works of art, face scans, computer animation and games are just a few of the possible areas of application. Highly Flexible Setup DAVID-SLS-2 is a complete 3D scanner, capable of digitizing tiny or large objects with an astonishing level of detail as fine as 60 microns. The scanner has more flexibility and usability than ever and can be adjusted to the scan object very rapidly. With our innovative slider-system the scanner is now continuously adjustable without needing any tool. In combination with a laptop and a 12V DC-source, you get a very stable and mobile scan solution. Excellent Value for Money In the past, now and in the future, DAVID stands for high performance 3D scanners at an unbeatable price-performance ratio. The structured light technology operates without any moving mechanical parts, which makes the scanner inexpensive and robust. : 020 8202 8743 : info@itis3d.com www.itis3d.com