R DDP-05 USER'S MANUAL
Contents Features General Instructions. Overview. Front Panel Rear Panel. Operation Guide 5. Mode 5. Mode 6 Technical Specifications 8 DDP-05 CHANNEL DIGITAL DIMMERPACK Improvement and changes to this manual, specifications and design, may be made at any time without prior notice. R ALL RIGHTS RESERVED. The Pioneer of Entertainment Lighting Industry
Features Thank you for purchasing this BOTEX product. This DDP-05 features include: -pin standard DMX IN/OUT ports. 0-00% dimming level 6 built-in programs subject to Speed and Dimmer Provide dimmer control information to channel using DMX-5 protocol. Power failure memory. digits Segment Display shows current activity and function state. Every effort has been made to design dependability, reliability and comfort into each unit. New products are being designed constantly to meet the needs of both entertainment and the lighting industry. We welcome your comments about our product and services. It is both aprivilege and apleasure serving you.
General Instructions Please read through this operating instructions before installing or using your new product. After you have finished reading the instructions, put them away in asafe place for future reference. Safe and Efficient Use This product must be earthed. Do not make any inflammable liquids, water or metal objects enter the unit. Take care not to damage the power cord. No user serviceable parts inside, always consult authorized personnel for repairs. In the event of amalfunction(burning smell, etc.), immediately stop operation, disconnect the power supply plug, and consult authorized service personnel. Toprevent fire or shock hazard, do not expose this product to rain or moisture. Product Care This product is intended for indoor use only. Provide occasional ventilation during use. Unplug the power plug from the sockets when not using the unit for extended period. Do not use the unit in places subject to excessive humidity, vibration or bumps. Place this unit in astable location. Do not dismantle or modify the unit.
. Overview. Front Panel OUTPUT:5A/CH,TOTAL6A Max. DISPLAY 8888 RECEIVE CHASE TOTAL DMX CHANNEL DMX CHANNEL CHASE PROGRAM CHASESPEED CH:0 CH:0 SP:99 MODE MENU 7 CHASEDIMMER p :000 p 5 6. Channel Output 5Aper channel, total 6 Amax.. Channel LEDs Shows the intensity of the channel in use.. Segment Display Shows current activity or function state.. MODE button Press to select operating mode between and. 5. MENU button Press to select desired menu setting. 6. button Press to increase the display value. 7. button Press to decrease the display value.
. Overview. Rear Panel 0 FUSES: F6.A 50V 5x0mm OFF CAUTION RISKOFELECTRICSHOCK DISCONNECTINPUTPOWER BEFOREOPENING WARNING: THISAPPARATUSMUSTBEEARTHED N'OUVREZPAS..RISQUEDECHOCELECTRIQUE DMX IN DMX OUT =Ground =Data- =Data+ POWER ON POWER INPUT: AC 0V~50Hz,6Amax. MADEINCHINA -00-0697 8 9 8. Power Switch Press to turn ON/OFF the power. 9. Power Cable Connect to an appropriate power outlet rated AC 0V~50Hz. 0. Channel Fuse F6.A 50V 5x0mm. DMX Out -pin XLR female, used to transmit DMX data.. DMX In -pin XLR male, used to receive DMX data.
. Operation Guide. Mode p0. Press MODE button to select mode. p05. Tap button(or button )to your wanted chase within 0-6 built-in chases. sp5. Press MENU button to enter Speed mode. sp. Tap button(or button) to your desired speed. 5
. Operation Guide. Mode p 05 5. Press MENU button to enter Dimmer mode. p 059 6. Tap button(or button) to set the intensity for the chase.. Mode CH0. Press MODE button to select mode, the Segment Display shows CH:0, CH:0 or ch:0. 6
. Operation Guide. Mode. Tap button or button for desired channel settings. ch0 When ch: 0 appears, overall channel output is controlled by one DMX channel; whench: 0 appears, every two channel output is controlled by one DMX channel; when ch:0 appears, each channel output is controlled by one DMX channel. a05. Press MENU button to set DMX initial address for the channel. a05. Tap button or button for desired channel settings. If you set address 5 for the first channel, then 6, 7 and 8 for the rest channels in sequence. 7
Technical Specifications Power Input... AC 0V~50Hz, 6 Amax. Channel Output... 5Aper channel, Total 6 Amax. DMX OUT... -pin XLR female DMX IN... -pin XLR male Channel Fuse... F6.A 50V 5x0mm Dimensions... x88x7mm Weight.... Kg 8
R ALL RIGHTS RESERVED Rev.0 May, 000-00-0