PTF Seals Worldwide Made in enmark
of high quality PTF products materials experience, helping customers to make the right decision when specifying standard and non standard PTF seals and bearings. llways fully updated and stateoftheart N machines Our production facilities are fully updated and include stateoftheart N machines.. business founded in 1969 in enmark. 30 years ago the demands for hydraulic seals was split from the business and a new era of optimizing the PTF sealing products
How to define ccofluor seals SLTION UI: Our part number system states the types of seals: F51110005640 Material, in this case PTF + 40% ronze, green (ORing), in this case "" for dim. x 7,75 Nom. diameter x 10 type, in this case Piston ouble acting To find the right type of seal, see Overviews on the following pages. Select the profile cross section in accordance with the groove dimension, and the nominal size of the seal To order light or heavy version, please choose "" for light and "" for heavy version Types of standard materials are found in the table below Standard Materials Material ode ompound olour Temperature range Fref. (standard)* 1012 1610 PTF, Virgin F PTF, modified TFM 1600 White White 200 +250 200 +260 1022 PTF, modified Turquise 200 +260 1024 PTF, modified, F approved Turquise 200 +260 2410 PTF, 10% arbon lack 200 +260 2413 PTF, 10% arbon Fiber lack 200 +260 2426 PTF, 25% arbon/graphite lack 200 +260 2428 3015 PTF, carbon, graphite, additiv. PTF, 15% raphite ark, brown lack 200 +260 200 +260 4115 PTF, 15% lassfiber, Mos2 rey 200 +260 4125 PTF, 25% lassfiber, Mos2 rey 200 +260 4025 PTF, 25% lassfiber White/light grey 200 +260 5640 PTF, 40% ronze, green reen 200 +200 5060 PTF, 60% ronze rown 200 +200 6050 PTF, 50% Stainless steel rey 200 +200 7710 PH 1000 (UHMWP) F White 50 + 80 1111 ONOL Light brown 65 +250 7010 POM White 50 + 85 7020 POM lack 50 + 85 8172 PUR L 72 Yellow 70 +130 8158 9305 PUR L 58 PK Natur Yellow Natural/brownish grey 70 +120 60 +250 *There are hundreds of different PTF Materials with variants of fillers. For more information please contact ccofluor /S Wiper seal uide ring¹ ylinder tube Static seal² Piston ylinder bottom Wiper Seals: Rod Piston Rod Seals: uide Rings¹: Static Seals²: Piston seals: Static seal² Rod Piston seal uide ring ¹Piston & Rod uide Rings: PTF, phenolic or polyester ²Static Seals: ORing + backup ring. PTF, Hytrel + PU
PROFIL OVRVIWS: Piston & s 511 505 518 541 411 405 418 441 Piston seal Nom. ia. width ORing 8,0 14,9 2,45 8,0 16,9 2,2 2,45 1,78 15,0 39,9 3,75 17,0 26,9 3,2 3,65 2,62 40,0 79,9 5,5 27,0 59,9 5,35 3,53 80,0 132,9 7,75 60,0 199,9 7,55 5,33 133,0 329,9 10,5 200,0 255,9 10,25 7,0 F 330,0 669,9 12,25 F 256,0 669,9 12,0 7,0 670,0 999,9 14,0 670,0 999,9 9,5 13,65 8,4 3,0 7,9 8,0 18,9 19,0 37,9 38,0 199,9 200,0 255,9 256,0 649,0 650,0 999,9 446 F Piston & s, ISO 544 Nom. ia. width ORing s 8,0 14,9 2,2 2,5 1,78 6,0 14,0 15,0 39,9 3,2 3,75 2,62 12,0 25,0 40,0 79,9 5,5 3,53 20,0 63,0 80,0 132,9 7,75 5,33 56,0 160,0 133,0 329,9 10,5 7,0 160,0 250,0 F 330,0 669,9 12,25 7,0 250,0 660,0 F 444 Wiper, single & double acting 580 585 480 485 Piston Wiper width ORing Rod Wiper Nom. ia. Nom. ia. 3,7 2,4 1,78 6,0 11,9 5,0 3,4 2,62 12,0 64,9 6,0 4,4 3,53 65,0 250,9 8,4 6,1 5,33 251,0 420,9 11,0 8,0 7,0 421,0 650,9 14,0 10,0 8,4 651,0 999,0 oubleacting Wiper 587 Piston Wiper width ORing Nom. ia. 3,8 2,62 4,4 2,62 6,1 3,53 9,5 8,0 5,33 14,0 12,0 7,0 16,0 13,65 8,4 Rod Wiper Nom. ia. 6,0 11,9 12,0 64,9 65,0 250,9 251,0 420,9 421,0 650,9 651,0 999,0 487 Rotation seals 523 423 Piston seal Nom. ia 8,0 39,9 40,0 79,9 80,0 132,9 133,0 329,9 330,0 669,9 670,0 999,9 width 2,2 3,2 9,5 ORing 2,45 1,78 3,75 2,62 5,5 3,53 7,75 5,33 10,5 7,0 14,0 8,4 Nom. ia. 6,0 18,9 19,0 37,9 38,0 199,9 200 399,9 400 649,9 650,0 999,9 Piston seals 553 Piston seal width ORing Nom. ia 40,0 79,9 5,0 2 x 2,62 80,0 132,9 8,3 6,5 2 x 3,53 133,0 462,9 12,3 9,0 2 x 5,33 463,0 700,0 1 15,5 2 x 7,00
Piston & s 551 451 ORing Width epth F 16,0 39,9 40,0 79,9 80,0 132,9 133,0 252,9 253,0 462,9 463,0 700,0 9,5 11,0 5,5 7,75 10,5 12,25 14,0 17,5 3,53 5,33 7,0 7,0 8,4 10,0 F 530 430 Width epth ORing 5,0 13,9 2,4 1,45 1,78 4,0 9,9 14,0 24,9 3,6 2,25 2,62 10,0 19,9 25,0 45,9 4,8 3,1 3,53 20,0 39,9 46,0 124,9 7,1 4,7 5,33 40,0 119,9 125,0 669,9 9,5 6,1 7,0 120,0 649,9 670,0 999,9 10,0 7,5 8,4 650,0 999,9 Spring nergized Piston & s without backup ring 710 Width epth ORing 6,0 13,9 2,4 1,45 1,78 4,0 9,9 14,0 24,9 3,6 2,25 2,62 10,0 19,9 25,0 45,9 4,8 3,1 3,53 20,0 39,9 46,0 124,9 7,1 4,7 5,33 40,0 119,9 125,0 9,5 6,1 7,0 120,0 649,9 610 Spring nergized Piston & s with backup ring 6,0 13,9 Width epth ORing 3,8 1,45 1,78 4,0 9,9 14,0 24,9 4,65 2,25 2,62 10,0 19,9 25,0 45,9 5,7 3,1 3,53 20,0 39,9 46,0 124,9 8,5 4,7 5,33 40,0 119,9 125,0 11,2 6,1 7,0 120,0 649,9 Roof shaped seals PTF 25% arbon PTF Virgin PTF conform to F regulations ackup Rings Metric, Imperial & US standards F120: Solid F110: Split F100: Spiral uide strips, filled PTF X Y Z ut uide strips for Standard or Special dimensions up to 95 mm width Full length Rolls or cut in pieces to length Standard or teardrop dynamic surfaces Standard material: PTF 40% ronze & PTF 25% arbon uide Strips width [mm] Thickness [mm] 2,5 3,2 4,0 5,6 9,7 10,0 12,0 15,0 20,0 25,0 1,00 1,50 1,55 2,00 2,50 3,00 4,00 Standard dimensions For further information, please contact OFLUOR /S
Knowledge, flexibility and service Knowledge, flexibility and service are some of the key words, when we describe our mission. We work hard to achieve high customer satisfaction, both regarding our products and the support we offer. Research and development for customers worldwide ichtungen, seals, joints... Whether erman, nglish or Frenchspeaking, our customers all over the world appreciate our highquality seals for hydraulic applications and everywhere else, where seals are used. Our guide tape is some of the best available and we are proud of setting the market standard, and we constantly strive to develop and improve our products. Not in order to keep up, but to be a part of the development. Keep in touch! Visit us on www.accofluor.com, or call us if you have any inquiries. Our helpful team is always happy to team up with partners in order to solve whatever problems they might encounter.
VO Seal Team ivision PTF seals and bearings FFKM ynalast Nordic ngineering & sales France Plastic, Seal Jet & Lab. injection moulding of thermoplastic materials Hydraulic Seals
ccofluor /S Topstykket 2123 K3460 irkerød Phone: +45 49 11 00 30 Fax: +45 49 11 00 39 info@accofluor.com www. accofluor.com