Windows & Doors Standard Sizes Version Six 2012
General information windows and doors Sizes This catalogue contains all Stegbar s standard sizes for windows and doors. These are the ones that we make every day. They are performance rated and will be delivered in an advised lead time. They are sized to fit standard brick openings. Should you require one of our standard windows in a special size, it s not a problem. We ll work with you to ensure that the size you want maintains its rating performance, and can be delivered when you need it. Cedar Due to the natural colour variation in cedar, we cannot guarantee colour matching of timber components. Aluminium sections, including insect screens, locks, handles, winders and other hardware are finished in hamersley brown powder coat as standard. Aluminium Available in a range of standard and custom colours. Black coloured locks, handles, winders and other hardware are fitted as standard. (Other colours are available). Aluminium bifolds are only available with brushed satin chrome hardware. The handing (which sash operates) can be reversed from what is shown in this catalogue. Glazing bars Colonial and Federation bar layouts are shown and other configurations are available on request. Insect screens Aluminium framed insect and safety screens are available in a standard range of colours to match aluminium windows and doors. Cedar framed insect screens are supplied raw, ready for final sanding and finishing. Window and door codes All Stegbar codes for windows and doors follow a consistent format. The letters explain the type of material (the first letter) and the style of the window or door (the last two letters). And the numbers specify the height (the first two digits) and width (the last two digits). For example a CSW1314 is a Cedar Sliding Window which has a frame size of 1370mm high by 1450mm wide. Other Aluminium cover plates (flashings) and aluminium angles are not supplied as standard, but are available on request. All Stegbar windows and doors shown in this Standard Sizes catalogue have been designed and glazed in accordance with relevant Australian Standards AS2047, AS1288 and AS2208 and conform to AS4055 for wind loads. 2
Contents Codes Window and door symbols General information... 2 When ordering products specify the material type in front of the product codes shown in this catalogue with either: Awning top hung Hinge Door frame only Measuring window and door frames... 4 Bay window... 5 A aluminium Curves, rakes and shapes... 6 C cedar Glazing bars... 7 Product codes indicated are for products without additional features such as glazing bars, transom (unless indicated) or chair rail. If required insert the required variation code after the product code. CB colonial glazing bar FB federation glazing bar T transom CR chair rail (cedar only) For bi-fold windows and doors, entry and laundry units, and sliding doors additional codes are added after the product code to indicate specific product configurations. Vertical section Casement side hung Horizontal section Hinge Elevation Elevation Double hung vertical sliding Moving sash Hinge Single door with sill Door frame plus door Hinge Single door no sill Sliding window... 8 Double hung window... 9 Awning window... 10 Casement window... 11 Fixed window... 12 Bi-fold window... 13 Bi-fold patio door... 14 Sliding patio door... 15 Stacking patio door... 16 Door frames... 17 Laundry combinations... 18 Internal bi-fold door... 19 Example 2L2R after a bi-fold code indicates that it s four panels, 2 open to the left and 2 open to the right (as seen from the outside). Vertical section Moving sash Elevation Single door with sill Single door no sill Internal room dividers... 19 Display centres... Back page Example SR after an entry unit code indicates that the sidelite is on the right of the door (as seen from the outside). Sliding horizontal sliding Sliding door Example 3 after a sliding door code indicates that the sliding door has 3 panels. Horizontal section Moving sash Elevation Sliding panel Single door 3
Measuring window and door frames Standard Stegbar frame sizes match brick opening sizes. For all window and door materials the frame is measured on where it sits in the brick opening, as displayed in the illustrations below. Reveal thickness is not included in the frame size of revealed aluminium products. But the stud opening is bigger for revealed aluminium as indicated in the size charts. All frame materials Revealed aluminium All frame materials Revealed aluminium Head beam Head beam Head beam Head beam Head beam Head beam He bea BRICK COURSES ALL FRAME SIZES Sill plate STUD OPENING REVEALED STUD OPENING ALUMINIUM FRAME SIZE Sill plate BRICK COURSES BRICK COURSES ALL FRAME SIZES STUD OPENING REVEALED STUD OPENING ALUMINIUM FRAME SIZE BRICK COURSES BRICK COURSES ALL FRAME SIZES Sill plate STUD OPENING REVEALED STUD OPENING ALUMINIUM FRAME SIZE Sill plate BRICK COURSES BRICK COURSES The illustrations shown in this catalogue are based on brick veneer wall construction. Refer to the Stegbar Technical Manuals for specific building-in details of each product type and material. Horizontal and vertical cross sections are provided for various house constructions such as weatherboard and double brick. Available at stegbar.com.au 4
Bay window general information Stegbar bay windows can be configured in cedar or aluminium, using any of our standard window sizes. Our standard bay window is configured with a front that is parallel to the house and side wings at 135, though we can also do 90 and custom angles. A bay window can be constructed from many combinations of standard Stegbar windows. The most popular feature fixed panels combined with either awning, casement or double hung windows. Positioning of the operable windows will depend on your circumstances and functional requirements. Please ask your sales consultant about our bay window options. Casement/Fixed/Casement, with lowlite Double hung/fixed/double hung Fixed/Sliding/Fixed, with lowlite 5
Curves, rakes and geometric shapes Stegbar curved windows are available as full, half and quarter circles, and as ellipses with and without upstands, in cedar and aluminium. Raked windows are available with two or three parallel/ perpendicular sides. With a variety of geometric shapes also available the opportunity for you to create your own unique design is almost limitless. No matter which one you choose curve, rake or geometric shape they can be used as a free standing window to create a unique visual element or to complement the building design, or they can be attached to one of our standard windows to create an arched hi-lite. As configurations, building-in details, frame material type and the glass thickness all have an impact on the size limitations for curved, raked and shaped windows, a Stegbar sales consultant will help you choose the right shape in the right size so that you can rest easy with a window that will provide you with the performance and the look you require. 6
Glazing bars Colonial glazing bar windows Federation glazing bar windows Up to 600mm No horizontal bar Colonial bar exceptions Up to 600mm One horizontal bar Federation bar exceptions 601mm 1030mm One horizontal bar Double Hung windows 1031 1540 Three horizontal bars (including meeting rail) Over 600mm Two horizontal bars Double Hung windows up to One horizontal bar (meeting rail not included) 1031mm 1540mm Two horizontal bars Over 1540mm Lowlite added Lowlite No horizontal bar Fixed & Sliding windows Over 1540 Three horizontal bars Note Indicated colonial glazing bars may be replaced by a frame member in certain sizes (i.e. meeting rails and transoms). Lowlite No horizontal bar Double Hung windows Over Two horizontal bars (meeting rail not included) Lites up to 970 One vertical bar Lites over 970 Two vertical bars Lites up to 970 One vertical bar Lites over 970 Two vertical bars Colonial glazing bar doors Federation glazing bar doors All sash heights Three horizontal bars All sash heights Two horizontal bars Sashes up to 905 One vertical bar Sashes over 905 Two vertical bars All sash widths Two vertical bars 7
Sliding window standard sizes 2.5 3.0 3.5 4.0 4.5 5.0 6.0 6.5 7.5 9.0 10.0 11.0 NUMBER OF BRICKS 666 786 906 1026 1146 1266 1506 1626 1866 2226 2466 2706 STUD OPENING REVEALED ALUMINIUM 630 750 870 990 1110 1230 1470 1590 1830 2190 2430 2670 STUD OPENING OTHER MATERIALS 610 730 850 970 1090 1210 1450 1570 1810 2170 2410 2650 FRAME SIZE ALL MATERIALS 11 9 7 666 630 600 838 802 772 1010 974 SW0606 SW0607 SW0608 SW0609 SW0610 SW0612 SW0614 SW0615 SW0618 SW0621 SW0624 SW0626 SW0706 SW0707 SW0708 SW0709 SW0710 SW0712 SW0714 SW0715 SW0718 SW0721 SW0724 SW0726 SW0907 SW0908 SW0909 SW0910 SW0912 SW0914 SW0915 SW0918 SW0921 SW0924 SW0926 Note All units are illustrated as viewed from outside. All dimensions are in mm. Two lite sliding windows are handed on the left as standard but can be SW1008 SW1009 SW1010 SW1012 SW1014 SW1015 SW1018 SW1021 SW1024 SW1026 SW1209 SW1210 SW1212 SW1214 SW1215 SW1218 SW1221 SW1224 SW1226 SW1310 SW1312 SW1314 SW1315 SW1318 SW1321 SW1324 SW1326 18 1606 1570 1540 16 1436 1400 1370 12 1096 1060 1030 reversed. Ask your sales consultant. Three lite sliding window sashes are 14 1266 1230 1200 proportioned as quarter/half/quarter in width but can be ordered as equal widths. Ask your sales consultant. SW1512 SW1514 SW1515 SW1518 SW1521 SW1524 SW1526 21 1866 1830 1800 1200 SW1809T SW1810T SW1812T SW1814T SW1815T SW1818T SW1821T SW1824T SW1826T 24 2124 2088 2058 1370 SW2010T SW2012T SW2014T SW2015T SW2018T SW2021T SW2024T SW2026T 24.5 2166 2130 2100 1370 SW2110T SW2112T SW2114T SW2115T SW2118T SW2121T SW2124T SW2126T 8
Double hung window standard sizes 2.5 3.0 3.5 4.0 4.5 5.0 6.0 6.5 7.5 9.0 10.0 11.0 NUMBER OF BRICKS 666 786 906 1026 1146 1266 1506 1626 1866 2226 2466 2706 STUD OPENING REVEALED ALUMINIUM 630 750 870 990 1110 1230 1470 1590 1830 2190 2430 2670 STUD OPENING OTHER MATERIALS 610 730 850 970 1090 1210 1450 1570 1810 2170 2410 2650 FRAME SIZE ALL MATERIALS 21 18 16 14 12 11 1866 1606 1436 1266 1096 1010 1830 1570 1400 1230 1060 974 1800 1540 1370 1200 1030 DH0906 DH0907 DH0908 DH0909 DH0910 DH0912 DH0914 DH0915 DH0918 DH0921 DH0924 DH0926 DH1006 DH1206 DH1306 DH1506 DH1007 DH1207 DH1307 DH1507 DH1008 DH1208 DH1308 DH1508 DH1009 DH1209 DH1309 DH1509 DH1010 DH1210 DH1310 DH1510 DH1012 DH1212 DH1312 DH1512 DH1014 DH1214 DH1314 DH1514 DH1015 DH1215 DH1315 DH1515 DH1018 DH1218 DH1318 DH1518 DH1021 DH1221 DH1321 DH1521 DH1024 DH1224 DH1324 DH1524 DH1026 DH1226 DH1326 DH1526 Note All units are illustrated as viewed from outside. All dimensions are in mm. Available in cedar only is a tilt double hung, where both the top and bottom sashes are able to be tilted inwards. Replace DH with TW if a tilt double hung window is required. Two and three lite double hung windows have the option of a division bar across the fixed lite. Ask your sales consultant. Over 1800mm high double hung windows can be configured with a lowlite. Ask your sales consultant. DH1806 DH1807 DH1808 DH1809 DH1810 DH1812 DH1814 DH1815 DH1818 DH1821 DH1824 DH1826 Three lite double hung sashes are 24 2124 2088 2058 DH2006 DH2007 DH2008 DH2009 DH2010 DH2012 DH2014 DH2015 DH2018 DH2021 DH2024 DH2026 24.5 2166 2130 2100 proportioned equally in width across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant. DH2106 DH2107 DH2108 DH2109 DH2110 DH2112 DH2114 DH2115 DH2118 DH2121 DH2124 DH2126 9
Awning window standard sizes 2.5 3.0 3.5 4.0 4.5 5.0 6.0 6.5 7.5 9.0 10.0 11.0 NUMBER OF BRICKS 666 786 906 1026 1146 1266 1506 1626 1866 2226 2466 2706 STUD OPENING REVEALED ALUMINIUM 630 750 870 990 1110 1230 1470 1590 1830 2190 2430 2670 STUD OPENING OTHER MATERIALS 610 730 850 970 1090 1210 1450 1570 1810 2170 2410 2650 FRAME SIZE ALL MATERIALS 21 18 16 14 12 11 9 7 1866 1606 1436 1266 1096 1010 838 666 1830 1570 1400 1230 1060 974 802 630 1800 1540 1370 1200 1030 772 600 AW0606 AW0607 AW0608 AW0609 AW0610 AW0612 AW0614 AW0615 AW0706 AW0707 AW0708 AW0709 AW0710 AW0712 AW0714 AW0715 AW0906 AW0907 AW0908 AW0909 AW0910 AW0912 AW0914 AW0915 AW1006 AW1007 AW1008 AW1009 AW1010 AW1012 AW1014 AW1015 AW1206 AW1207 AW1208 AW1209 AW1210 AW1212 AW1214 AW1215 AW1306 AW1307 AW1308 AW1309 AW1310 AW1312 AW1314 AW1315 AW1506 AW1507 AW1508 AW1509 AW1510 AW1512 AW1514 AW1515 AW0618 AW0718 AW0918 AW1018 AW1218 AW1318 AW1518 AW0621 AW0721 AW0921 AW1021 AW1221 AW1321 AW1521 AW0624 AW0724 AW0924 AW1024 AW1224 AW1324 AW1524 AW0626 AW0726 AW0926 AW1026 AW1226 AW1326 AW1526 1200 Note All units are illustrated as viewed from outside. All dimensions are in mm. Three lite awning window sashes are proportioned equally in width across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant. AW1806T AW1807T AW1808T AW1809T AW1810T AW1812T AW1814T AW1815T AW1818T AW1821T AW1824T AW1826T 24 2124 2088 2058 1370 AW2006T AW2007T AW2008T AW2009T AW2010T AW2012T AW2014T AW2015T AW2018T AW2021T AW2024T AW2026T 24.5 2166 2130 2100 1370 AW2106T AW2107T AW2108T AW2109T AW2110T AW2112T AW2114T AW2115T AW2118T AW2121T AW2124T AW2126T 10
Casement window standard sizes 2.5 3.0 3.5 4.0 4.5 5.0 6.0 6.5 7.5 9.0 10.0 10.5 NUMBER OF BRICKS 666 786 906 1026 1146 1266 1506 1626 1866 2226 2466 2586 STUD OPENING REVEALED ALUMINIUM 630 750 870 990 1110 1230 1470 1590 1830 2190 2430 2550 STUD OPENING OTHER MATERIALS 610 730 850 970 1090 1210 1450 1570 1810 2170 2410 2530 FRAME SIZE ALL MATERIALS 21 18 16 14 12 11 9 7 1866 1606 1436 1266 1096 1010 838 666 1830 1570 1400 1230 1060 974 802 630 1800 1540 1370 1200 1030 772 600 CW0606 CW0706 CW0707 CW0708 CW0709 CW0710 CW0712 CW0714 CW0715 CW0906 CW0907 CW0908 CW0909 CW0910 CW0912 CW0914 CW0915 CW1006 CW0607 CW0608 CW0609 CW0610 CW0612 CW0614 CW0615 CW1007 CW1008 CW1009 CW1010 CW1012 CW1014 CW1015 CW1206 CW1207 CW1208 CW1209 CW1210 CW1212 CW1214 CW1215 CW1306 CW1307 CW1308 CW1309 CW1310 CW1312 CW1314 CW1315 CW1506 CW1507 CW1508 CW1509 CW1510 CW1512 CW1514 CW1515 CW0618 CW0718 CW0918 CW1018 CW1218 CW1318 CW1518 CW0621 CW0721 CW0921 CW1021 CW1221 CW1321 CW1521 CW0624 CW0724 CW0924 CW1024 CW1224 CW1324 CW1524 CW0625 CW0725 CW0925 CW1025 CW1225 CW1325 CW1525 1200 Note All units are illustrated as viewed from outside. All dimensions are in mm. One and two lite casement windows are handed on the left as standard but can be reversed. Ask your sales consultant. The left and right sashes on a three lite casement window are handed to open out from the middle of the window towards the frame but can be reversed. Ask your sales consultant. Three lite casement window sashes are proportioned equally in width across the frame but can be ordered as quarter/half/quarter CW1806T CW1807T CW1808T CW1809T CW1810T CW1812T CW1814T CW1815T CW1818T CW1821T CW1824T CW1825T widths. Ask your sales consultant. 24 2124 2088 2058 1370 CW2006T CW2007T CW2008T CW2009T CW2010T CW2012T CW2014T CW2015T CW2018T CW2021T CW2024T CW2025T 24.5 2166 2130 2100 1370 CW2106T CW2107T CW2108T CW2109T CW2110T CW2112T CW2114T CW2115T CW2118T CW2121T CW2124T CW2125T 11
Fixed window standard sizes 2.5 3.0 3.5 4.0 4.5 5.0 6.0 6.5 7.5 9.0 10.0 11.0 NUMBER OF BRICKS 666 786 906 1026 1146 1266 1506 1626 1866 2226 2466 2706 STUD OPENING REVEALED ALUMINIUM 630 750 870 990 1110 1230 1470 1590 1830 2190 2430 2670 STUD OPENING OTHER MATERIALS 610 730 850 970 1090 1210 1450 1570 1810 2170 2410 2650 FRAME SIZE ALL MATERIALS FW0606 FW0706 FW0906 FW1006 FW1206 FW1306 FW1506 FW0607 FW0608 FW0609 FW0610 FW0612 FW0614 FW0615 FW0618 FW0621 FW0624 FW0626 FW0707 FW0708 FW0709 FW0710 FW0712 FW0714 FW0715 FW0718 FW0721 FW0724 FW0726 FW0907 FW0908 FW0909 FW0910 FW0912 FW0914 FW0915 FW0918 FW0921 FW0924 FW0926 FW1007 FW1008 FW1009 FW1010 FW1012 FW1014 FW1015 FW1018 FW1021 FW1024 FW1026 FW1207 FW1208 FW1209 FW1210 FW1212 FW1214 FW1215 FW1218 FW1221 FW1224 FW1226 FW1307 FW1308 FW1309 FW1310 FW1312 FW1314 FW1315 FW1318 FW1321 FW1324 FW1326 FW1507 FW1508 FW1509 FW1510 FW1512 FW1514 FW1515 FW1518 FW1521 FW1524 FW1526 FW1806 FW1807 FW1808 FW1809 FW1810 FW1812 FW1814 FW1815 FW1818 FW1821 FW1824 FW1826 24 2124 2088 2058 FW2006 FW2007 FW2008 FW2009 FW2010 FW2012 FW2014 FW2015 FW2018 FW2021 FW2024 FW2026 24.5 2166 2130 2100 21 18 16 14 12 11 9 7 1866 1606 1436 1266 1096 1010 838 666 1830 1570 1400 1230 1060 974 802 630 1800 1540 1370 1200 1030 772 600 Note All units are illustrated as viewed from outside. All dimensions are in mm. Over 1800mm high fixed windows can be configured with a lowlite. Ask your sales consultant. Three lite fixed window sashes are proportioned equally in width across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant. FW2106 FW2107 FW2108 FW2109 FW2110 FW2112 FW2114 FW2115 FW2118 FW2121 FW2124 FW2126 12
Bi-fold window standard sizes 4.0 5.0 6.0 7.5 8.0 10.5 NUMBER OF BRICKS 990 1230 1470 1830 1950 2550 STUD OPENING ALUMINIUM & CEDAR 970 1210 1450 1810 1930 2530 FRAME SIZE ALUMINIUM & CEDAR Note 18 14 11 964 1560 1220 1540 1200 BW0909 BW1209 BW0912 BW0914 BW0918 BW1212 BW1214 BW1218 BW0919 BW1219 BW0925 BW1225 All units are illustrated as viewed from outside. All dimensions are in mm. All bi-fold windows open to the outside. When ordering bi-fold windows Select the product code for the bi-fold window size in the top chart. Choose the configuration from the bottom chart. Add the configuration code to the end of the size code e.g. ABW1519-2L2R. BW1509 BW1512 BW1514 BW1518 BW1519 BW1525 Bi-fold window configurations 2L 3L 4L 2R 3R 4R 2L2R 13
Bi-fold patio door standard sizes 6.5 9.5 12.5 15.5 18.5 21.5 NUMBER OF BRICKS 1534 2258 2982 3706 4430 5154 STUD OPENING ALL MATERIALS 1514 2238 2962 3686 4410 5134 FRAME SIZE ALL MATERIALS 24.5 2120 2100 BD2115 BD2122 BD2129 BD2136 BD2144 BD2151 NOT RECOMMENDED IN CEDAR AT 2100mm HIGH DUE TO LOW OPENING HEIGHT OF 1937mm. THE MINIMUM UNOBSTRUCTED HEIGHT IS RECOMMENDED AT 1980mm. Note 25 2163 2143 All units are illustrated as viewed from outside. BD2215 BD2222 BD2229 BD2236 BD2244 BD2251 All dimensions are in mm. All bi-fold doors open to the outside. When ordering bi-fold patio doors 28 2420 2400 Select the product code for the bi-fold door size in the top chart. BD2415 BD2422 BD2429 BD2436 BD2444 BD2451 Choose the configuration from the bottom chart. Bi-fold patio door configurations Add the configuration code to the end of the size code e.g. ABD2449-3L3R. 2L 3L 4L 5L 6L 7L 8 panel ABD available on request. Retractable flyscreen available. 2R 3R 4R 5R 6R 7R 2L2R 2L3R 3L3R 4L3R 3L2R 2L4R 3L4R 4L2R 2L5R 5L2R 14
Sliding patio door standard sizes 6.5 7.5 9.0 10.0 11.0 1626 1866 2226 2466 2740 1590 1830 2190 2430 2704 1570 1810 2170 2410 2684 13.0 3174 3138 3118 13.5 3280 3244 3224 15.0 3640 3604 3584 15.0 3654 3618 3598 NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS 24 2096 2078 2058 SD2015 SD2018 SD2021 SD2024 SD2026-3 SD2031-4 SD2032-3 SD2035-3 SD2035-4 NOT RECOMMENDED IN CEDAR AT 2058mm HIGH DUE TO LOW OPENING HEIGHT OF 1942mm. THE MINIMUM UNOBSTRUCTED HEIGHT IS RECOMMENDED AT 1980mm. Note 24.5 2138 2120 2100 All units are illustrated as viewed from outside. SD2115 SD2118 SD2121 SD2124 SD2126-3 SD2131-4 SD2132-3 SD2135-3 SD2135-4 All dimensions are in mm. Aluminium stud opening formulas 25 2181 2163 2143 Revealed aluminium stud opening dimensions do not include a reveal on the sill. SD2215 SD2218 SD2221 SD2224 SD2226-3 SD2231-4 SD2232-3 SD2235-3 SD2235-4 Add 18mm to height of revealed aluminium stud opening for standard sill reveal or 38mm for 28 2438 2420 2400 hardwood sill. SD2415 SD2418 SD2421 SD2424 SD2426-3 SD2431-4 SD2432-3 SD2435-3 SD2435-4 15
Stacking patio door standard sizes 9.5 2380 2344 2324 11.0 2740 2704 2684 13.5 3280 3244 3224 19.0 4680 4644 4624 22.0 5400 5364 5344 26.5 6480 6444 6424 BRICK COURSES STUD OPENING REVEALED ALUMINIUM STUD OPENING ALUMINIUM & CEDAR FRAME SIZE ALUMINIUM & CEDAR 24 2096 2078 2058 ST2023 ST2026 ST2032 ST2046 ST2053 ST2064 NOT RECOMMENDED IN CEDAR AT 2058mm HIGH DUE TO LOW OPENING HEIGHT OF 1942mm. THE MINIMUM UNOBSTRUCTED HEIGHT IS RECOMMENDED AT 1980mm. Note 24.5 2140 2120 2100 All units are illustrated as viewed ST2123 ST2126 ST2132 ST2146 ST2153 ST2164 from outside. All dimensions are in mm. Aluminium stud opening formulas 25 2181 2163 2143 Revealed aluminium stud opening dimensions do not include a ST2223 ST2226 ST2232 ST2246 ST2253 ST2264 reveal on the sill. Add 18mm to height of revealed aluminium stud opening for 28 2438 2420 2400 standard sill reveal or 38mm for hardwood sill. 6424mm wide stacking doors with ST2423 ST2426 ST2432 ST2446 ST2453 ST2464 the shaded blue box are not available in cedar. 16
Door frames standard sizes Door information Door frames and entry units are sized to fit a standard 2040mm highx820mm wide door opening and may not always suit standard brick openings. Aluminium frames and doors which cannot be trimmed should be fitted to the finished floor. An asterisk (*) indicates that the frame will fit an industry standard 400mm wide sidelite. To calculate the required stud opening size for revealed aluminium add 38mm to frame height and 56mm to frame width. To calculate the required stud opening size for cedar and aluminium add 20mm to frame height and 20mm to frame width. Flat sill is also available on request for aluminium doors. The flat sill incorporates the sub sill as standard. Aluminium door Standard height 2040mm, width 820mm, thickness 37mm. Cedar traditional entry door Standard height 2040mm, width 820mm, thickness 38mm. MC cedar entry door Standard height 2040mm, width 820mm, thickness 44mm. 898 900 FRAME WIDTH 1210 1210 1325 1348 1348 1450 1450 1520 1210 1210 1310 1336 1340 1340 1450 1450 1520 1710 1725 1736 1792 1780 ALUMINIUM TIMBER Cedar internal door Standard height 2040mm, width 820mm, thickness 33mm. 2087 2090 NO SILL Frame to suit pair of 620 rebated doors Frame to suit pair of 620 doors with mushroom stop * * Frame to suit pair of 820 rebated doors Frame to suit pair of 820 doors with mushroom stop * * See the Stegbar Timber Doors catalogue for details on all sizes and styles available. No-Sill options FRAME HEIGHT 2144 2120 DF2009 EU2012 SL OPEN-IN WITH SILL DF2109 EU2112 SL EU2012 SR EU2112 SR DF2013 RB DF2013 MRS EU2013 SL EU2013 SR EU2014 SL EU2014 SR EU2015 SRL DF2017 RB DF2017 MRS Frame to suit pair of 620 rebated doors DF2113 RB Frame to suit pair of 620 doors with mushroom stop DF2113 MRS * * EU2113 SL EU2113 SR EU2114 SL EU2114 SR EU2115 SRL Frame to suit pair of 820 rebated doors DF2117 RB Frame to suit pair of 820 doors with mushroom stop DF2117 MRS EU2017 SRL * * EU2117 SRL All no-sill frames are sized with 10mm clearance beneath a standard 2040mm high door to allow for weather seals. Aluminium Notes Aluminium frame sizes are derived using a 2040mm high door and a sub-sill as standard. OPEN-OUT WITH SILL For flat sill options add 10mm 2114 2111 Frame to suit pair of 620 rebated doors Frame to suit pair of 620 doors with mushroom stop * * Frame to suit pair of 820 rebated doors Frame to suit pair of 820 doors with mushroom stop * * to open-out frame height. For open-in doors with flat sill, reduce frame height by 20mm. DF2209 EU2212 SL EU2212 SR DF2213 RB DF2213 MRS EU2213 SL EU2213 SR EU2214 SL EU2214 SR EU2215 SRL DF2217 RB DF2217 MRS EU2217 SRL 17
Laundry combinations standard sizes Laundry combinations are sized to fit a standard 2040mm highx820mm wide door opening. To calculate the required stud opening size for cedar and aluminium add 20mm to frame height and 20mm to frame width. To calculate the required stud opening size for revealed aluminium add 38mm to frame height and 56mm to frame width. To calculate the required stud opening height for revealed aluminium using a 38mm hardwood sill add 76mm to frame height. FRAME WIDTH 1470 1470 1830 1830 1450 1450 1810 1810 ALUMINIUM TIMBER NO SILL LU2014 L LU2014 R LU2018 L LU2018 R FRAME HEIGHT 2144 2120 2087 2090 OPEN-IN WITH SILL LU2114 L LU2114 R LU2118 L LU2118 R OPEN-OUT WITH SILL 2114 2111 LU2214 L LU2214 R LU2218 L LU2218 R 18
Internal bi-fold door standard sizes Stegbar internal bi-fold doors have a low profile head track for use when space is tight. Use for wardrobes, laundry or between rooms. 4 leaf internal bi-fold doors open in the middle and the doors stack to both jambs (2 each way). Internal bi-fold doors are available in two standard opening heights, 2078mm and 2378mm. 305 330 355 380 405 430 460 490 520 LEAF WIDTH FRAME WIDTH 620 670 720 770 820 870 930 990 1050 2 LEAF 1240 1340 1440 1540 1640 1740 1860 1980 2100 4 LEAF Internal room dividers standard sizes Stegbar internal room dividers are available for standard frame heights of 2100mm and 2400mm, and must use an even number of door leaves. Frame height and width are finished opening sizes. Jambs are not supplied. See the Stegbar Timber Doors catalogue for details on the leaf styles available. The chart indicates the standard door leaf widths available and the corresponsing frame width depending on the number of leaves used. Leaves can fold all to one side or a combination of pairs of leaves can be split to either side. 307 332 357 382 407 432 462 492 522 1237 1337 1437 1537 1637 1737 1857 1977 2097 4 LEAF LEAF WIDTH FRAME WIDTH 1850 2000 2150 2300 2450 2600 2780 2960 3140 6 LEAF 2463 2663 2863 3063 3263 3463 3703 3943 4183 8 LEAF 3076 3326 3576 3826 4076 4326 4626 4926 5226 10 LEAF 3689 3989 4289 4589 4889 5189 5549 5909 6269 12 LEAF 19
There s a Stegbar Display Centre near you New South Wales Victoria Queensland South Australia Albury 288 Townsend Street, Albury 2640 Airport West 91 Matthews Avenue, Airport West 3042 Bundall 2/101 Ashmore Road, Bundall 4217 Pooraka 20-24 Williams Circuit, Pooraka 5095 Batemans Bay Unit 2, 5 Cranebrooke Road Batemans Bay 2536 Chatswood 122-126 Victoria Avenue, Chatswood 2067 Erina Information and Selection Centre Shop 2, 208-210 The Entrance Road, Erina 2250 Lansvale 84-98 Hume Highway, Lansvale 2166 Lismore 558 Ballina Road, Goonellabah 2480 Moorebank Showerscreens and Wardrobes 3 Moorebank Avenue, Moorebank 2170 Newcastle 14 Northcott Drive, Kotara 2289 Taren Point 3/181 Taren Point Road, Taren Point 2229 Ballarat 40 Mair Street, Ballarat 3355 Bendigo 4 Contempo Court, Bendigo 3550 Geelong 137B Fyans Street, Geelong 3220 Rowville 949 Stud Road, Rowville 3178 Shepparton 81 Benalla Road, Shepparton 3630 Tasmania Launceston Home Ideas Centre Windows and doors on display only 262 York Street, Launceston 7250 Hervey Bay 37 Main Street, Pialba 4655 Kedron 200 Gympie Road, Kedron 4031 Maroochydore 110 Sugar Road, Maroochydore 4558 Stones Corner Information and Selection Centre 76 Old Cleveland Road, Stones Corner 4120 Toowoomba Homemaker Centre 7/12 Prescott Street, Toowoomba 4350 ACT Region Fyshwick Home Ideas Centre 28 Collie Street, Fyshwick 2609 Unley 119 Unley Road, Unley 5061 Western Australia Wangara 66 Prindiville Drive Corner Hartman Drive, Wangara 6065 For further information freecall 1800 681 168 stegbar.com.au Wollongong 259 Keira Street, Wollongong 2500 For all product disclaimer and warranty information applicable to this catalogue and other Stegbar products please visit stegbar.com.au. Stegbar Pty Limited ACN 007 090 280 ABN 52 007 090 280 STEGBAR 2012. All rights reserved. JWA_1210