Mold Indoor Air Quality Mold Facts Recently, concern about indoor exposure to mold has increased along with public awareness that exposure to mold can cause a variety of adverse health effects. While mold has become a major source of worry related to health in the indoor environment, please keep in mind molds naturally exist outdoors and indoors and are actually an important part of the natural community; thus, living in a totally mold-free environment is practically impossible. The City of Greenville Health Department has provided frequently asked questions relevant to mold and mold remediation. What is mold? Mold (mildew), mushrooms, and yeast are all types of fungi. Fungi are found both indoors and outdoors. Hundreds of different kinds of mold are commonly found in the United States. How do I know its mold? Mold can be many different colors. It may look furry, slimy, or powdery. Some mold has a musty, stale, or earthy odor. Mold usually grows in damp places, such as bathrooms and basements. How does mold grow? Mold needs water and food. It can grow almost anywhere there is water, high humidity, or damp conditions. Mold grows faster in warm temperatures and high humidity. Mold can feed on paper, fabric, wallpaper glue, sheetrock, wood, soap scum, leather, and many other surfaces. Health Effects Molds generally cause health symptoms by producing allergens, toxic substances (mycotoxins), or by causing infections. How are people exposed to mold? You can breathe in mold particles if mold is disturbed or damaged.
You can also breathe in tiny spores (similar to seeds) that mold may release into the air. You can touch mold and get it on your skin. You can swallow mold if you eat moldy or spoiled food. What are the health effects of mold? Some people are allergic to molds. Mold exposure may cause or worsen asthma symptoms, hay fever, or other allergies. The most common symptoms of mold exposure are cough, congestion, runny nose, and trouble breathing. Symptoms usually disappear after the mold contamination is removed. More severe reactions to mold may occur among workers exposed to large amounts of mold on the job, such as farmers working with moldy hay. Should I see a doctor if I have been exposed to mold? If you think that you or your children have symptoms related to mold exposure, you should see a doctor. Keep in mind that many symptoms associated with mold exposure are also caused by many other illnesses. Remediation Guidelines How can mold be prevented? While much has been written about mold cleanup, the simplest advice is still the best; Control the Moisture, Control the Mold. Without moisture, mold will not grow. Stop the moisture (fix the leak, hole, humidity) Dry all porous items (carpeting, sheetrock, etc.) within 24 hrs or discard-if the water was from a sewage backup or flood, the items should be discarded. Scrub mold off hard surfaces with detergent and water, and dry Crack a window while taking a shower in bathrooms with no exhaust ventilation this will help stop mold growth and keep it from coming back Landlord Responsibilities The Texas Property Code 92.056 LANDLORD LIABILITY AND TENANT REMEDIES; NOTICE TIME FOR REPAIR requires landlords to remedy and repair certain conditions after being informed of them by the tenant. Landlords must make a diligent effort to repair or remedy certain conditions when all the following requirements are met (TPC Section 92.052): The tenant gives notice of the condition to the person who normally accepts rent The tenant is not delinquent in rent payments at the time
The mold condition materially affects the physical health or safety of an ordinary tenant The tenant, a member of the tenant s family, a guest or invitee of the tenant or a lawful occupant of the dwelling did not cause the condition Mold Cleanup Guidelines The tips and techniques presented in this section will help you clean up your mold problem. Professional cleaners or remediators may use methods not covered in this publication. Please note that mold may cause staining and cosmetic damage. It may not be possible to clean an item so that its original appearance is restored. Scrub mold off hard surfaces with detergent and water, and dry completely. If the water damage occurred due to sewage backup or floodwater, disinfect by spraying or wiping the area with a diluted bleach solution (1 part bleach to 10 parts water). Taking precautions to avoid breathing the fumes, getting on skin or in eyes. Note: Do Not mix bleach with other cleaners! Fix plumbing leaks and other water problems as soon as possible. Dry all items completely. Absorbent or porous materials, such as ceiling tiles and carpet, may have to be thrown away if they become moldy. Mold can grow on or fill in the empty spaces and crevices of porous materials, so the mold may be difficult or impossible to remove completely. Avoid exposing yourself or others to mold. Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel. What to Wear When Cleaning Moldy Areas It is important to take precautions to limit your exposure to mold and mold spores. Avoid breathing in mold or mold spores In order to limit your exposure to airborne mold, you may want to wear an N-95 respirator, available at many hardware stores and from companies that advertise on the Internet. (They cost about $12 to $25.) Some N-95 respirators resemble a paper dust mask with a nozzle on the front; others are made primarily of plastic or rubber and have removable cartridges that trap most of the mold spores from entering. In order to be effective, the respirator or mask must fit properly, so carefully follow the instructions supplied with the respirator. Please note that the Occupational Safety and Health Administration (OSHA) requires that respirators fit properly (fit testing) when used in an occupational setting; consult OSHA for more information (800-321-OSHA or osha.gov) Wear gloves. Long gloves that extend to the middle of the forearm are recommended. When working with water and a mild detergent, ordinary household rubber gloves may be used. If you are using a disinfectant, a biocide such as chlorine bleach, or a strong cleaning solution, you should select gloves made from natural rubber, neoprene, nitrile, polyurethane, or PVC. Avoid touching mold or moldy items with your bare hands.
Wear goggles. Goggles that do not have ventilation holes are recommended. Avoid getting mold or mold spores in your eyes. Mold Testing The City of Greenville does not usually recommend testing as the first step in dealing with a mold problem. Reliable sampling for mold can be expensive, and requires equipment not available to the general public. Residents of individual private homes must pay a contractor to carry out such sampling, as it is not usually done by public health agencies. The general rule of thumb is, if mold can be seen or smelled, then there is a mold problem, and the recommendations for remediation apply. If you should desire to test for mold, the City of Greenville Health Department maintains a list of mold referrals. Need more mold information? Please contact the City of Greenville Health Department if you have further questions at (903) 457-3161; the EPA Indoor Air Quality hotline at 1 (800) 438-4318 or click on the following links for additional information. CDC mold information has frequently asked questions, identifying mold problems and cleanup, and workplace resources. EPA mold information includes resources for homeowners, schools, and building managers. http://www.bt.cdc.gov/disasters/pdf/flyer-get-rid-of-mold.pdf - Mold flyer from the Centers for Disease Control.
Mold Referrals Residential Mycotech Biological, Inc.; 2484 Hwy. 39N, Jewett, Texas (800)272-3716 (Mold Slide Kit-Least expensive way to go) Eco-Tech; P.O. Box 450598; Garland, Texas 75045-0598 (972)414-8566 (Paul Borders) IAQ Consultants; Fort Worth (Robert Garrison) (817)481-6280 Video-Aire/Enviromold; 2561 Gravel Drive; (817)589-7873 Ft. Worth, Texas 76118 (Duct and mold remediation-no testing) John Hulla; Dallas (214)343-7186 North American Analytical Labs; Abilene (915)691-0172 AAM, Inc.;Evenings and Weekends (817)282-9929 (Mold analysis and surveys) Mid-South Environmental, Inc. (817)731-6400 ETTL; 1717 E. Erwin; P.O. Box 2017; Tyler, TX 75710-2017 (903)595-6402 (James L. Aldredge Analytical Services Rep.) LMS (Loss Mitigation Services, Inc.) (800)333-2678 Commercial AVIA Environmental, LLC; 2905 W. Marshall Ave.; (903)297-6600 Longview, TX IHST: 2235 Keller Way; Carrollton, Texas 75006 (972)478-7415 (Also has small remediation company) Mycotech Biological, Inc.; 2484 Hwy. 39N, Jewett, Texas (800)272-3716 Eco-Tech; P.O. Box 450598; Garland, Texas 75045-0598 (972)414-8566 Occupational-Environmental Control, Inc.; (972)390-2900 1022 S. Greenville Ave., Suite 800; Allen, Texas John Hulla; Dallas (214)343-7186 North American Analytical Labs; Abilene (915)691-0172 King Consultants, Inc.; 803 Forest Ridge, Suite 204; (817)354-9890 Bedford, TX AAM, Inc.; Evenings and Weekends (817)282-9929 (Mold analysis and surveys) Mid-South Environmental, Inc. (817)731-6400 ETTL; 1717 E. Erwin; P.O. Box 2017; Tyler, TX 75710-2017 (903)595-6402 (James L. Aldredge Analytical Services Rep.) LMS (Loss Mitigation Services, Inc.) (800)333-2678 Disclaimer: This is a list of people in this area known to this office to do this type of work, however, the state is not certifying the quality of work by these companies. This is not a complete list of all people who do this type of work.