Getting Started with the License Administration Workbench 2.0 (LAW 2.0)

Getting Started SAP Global License Auditing Document Version: 1.2 2015-03-13 Getting Started with the License Administration Workbench 2.0 (LAW 2.0)

Table of Contents 1 Getting Started with the License Administration Workbench 2.0... 3 1.1 Prerequisites... 3 1.2 User Interface... 4 2 Process Steps in Consolidation...6 2.1 Starting License Administration Workbench 2.0... 6 2.2 Editing Master Data... 6 2.3 Process Steps in Consolidation... 7 2.3.1 Managing System Data... 7 2.3.2 Managing Results... 8 2.3.3 Grouping Users... 9 2.3.4 Consolidating Users... 10 2.3.5 Analyzing Results... 11 2.3.6 Transferring Results... 12 2 2013 SAP AG or an SAP affiliate company. All rights reserved. Getting Started with the License Administration Workbench 2.0 (LAW 2.0) Table of Contents

1 Getting Started with the License Administration Workbench 2.0 This short introduction is intended for administrators who are carrying out a license audit and want to consolidate license measurement data with the License Administration Workbench 2.0 (LAW 2.0). To quickly get started with LAW 2.0, the standard processing steps involved in the consolidation are described below. You can find detailed information about the all the functions in LAW 2.0 in the help texts, which can be called up from the question mark icon. 1.1 Prerequisites SAP NetWeaver Release (SAP_BASIS) 7.02 (Support Package 13 or higher) or 7.40 is installed. The collective note 1995778 (for 7.02) or note 2067837 (for 7.40) was applied including all manual steps. Caution These collective notes are enhanced regularly. Make sure you have applied the newest version. The Internet Graphics Service (IGS) and the Adobe Document Services (ADS) must be available and configured correctly. The measurement results from the component systems are available as files (.txt or.xml), or can be transferred over a predefined RFC connection to SAP component systems. You use the LAW system overview sent with the measurement request to display all the systems whose measurement data you want to consolidate in LAW 2.0. All necessary system data (system number, installation number, hardware key, system ID) are already contained in the system overview. In addition, individual consolidation rules and engine usage information can be imported with the system overview. In SAP Support Portal there is a list of frequently asked questions: http://support.sap.com/keys-systems-installations/measurement/law/law-faq.html Getting Started with the License Administration Workbench 2.0 2013 SAP AG or an SAP affiliate company. All rights reserved. 3

1.2 User Interface Caution The License Administration Workbench 2.0 runs in a Web Browser. If the maximum inactive time is exceeded, the connection to the server is closed. To avoid data loss, save your work regularly. User Interface of the License Administration Workbench 2.0 The Header contains the current Consolidation Number (consolidation ID). The current consolidation ID is displayed as soon as you save the consolidation. As long as a newly created consolidation has not been saved, the temporary number $1 is displayed. In the Header you can also find the current consolidation: In Process Measurement results have been imported or the engine usage information entered. Users grouped together Users were grouped together according to a grouping criterion. Consolidated Users were consolidated. Sent to SAP Results were transferred to SAP or the result was saved in the local system as an.xml file. This step finishes the consolidation. The last consolidation with status Sent to SAP can be opened again if necessary, by choosing Open Consolidation from the menu bar. Canceled Canceled consolidations can be displayed, but not opened again 4 2013 SAP AG or an SAP affiliate company. All rights reserved. Getting Started with the License Administration Workbench 2.0 (LAW 2.0) Getting Started with the License Administration Workbench 2.0

In the Menu Bar of LAW 2.0 you can set the function mode and choose between: Standard All of the functions for carrying out a standard consolidation are provided here. Extended Mode The following additional options are available: o Import and define consolidation rules o Create and define consolidation groups o Perform additional grouping (according to a second attribute) o Assign external user attributes and use them for grouping o Assign external systems if automatic system assignment is not possible for external results (e.g. SAP HANA). o Import and define engine usage information o Define LAW settings o Assign RFC connections o Maintain description of special users The Consolidation Roadmap displays the process step in which the current consolidation is located. By selecting an active process step you can go directly to this step, or else choose Next Step and Back. A nonactive process step (grey) becomes active as soon as the process step required for it has been performed. In the message area you can see system messages, e.g. whether actions have been executed successfully or with errors. Getting Started with the License Administration Workbench 2.0 2013 SAP AG or an SAP affiliate company. All rights reserved. 5

2 Process Steps in Consolidation 2.1 Starting License Administration Workbench 2.0 You start the License Administration Workbench 2.0 (LAW 2.0) with transaction codeslaw2 in SAP GUI. When LAW 2.0 is started for the first time, you can confirm with Yes that the processing of RFC results is switched to LAW 2.0. If you want RFC results to still be processed with the previous version of LAW, this setting can be changed at any time. If you choose No RFC results will continue to be processed with the previous LAW version. You can now see the following functions in the initial menu: Start New Consolidation (later also Process Current Consolidation and Display/Delete Completed Consolidation Edit Master Data 2.2 Editing Master Data The function block you get to when you choose Edit Master Data groups together the master data editing options from the separate processing steps. You can edit the master data in the relevant process steps, or at any time by choosing Edit Master Data. The editing options are available in the individual processing steps in Extended Mode. 6 2013 SAP AG or an SAP affiliate company. All rights reserved. Getting Started with the License Administration Workbench 2.0 (LAW 2.0) Process Steps in Consolidation

2.3 Process Steps in Consolidation 2.3.1 Managing System Data Recommendation The system overview provided by SAP makes it easy to check results are complete by comparing systems that are relevant with those systems that have been measured up to now. In addition, individual consolidation rules, engine usage information, and engine preselection can be imported with the system overview. To import the system overview, choose Import System Overview, and if necessary, define non-relevant systems by choosing Edit Systems or going directly to the overview table. If you want to run the consolidation without a system overview, go to the next process step Manage Results, and import the results of the component systems directly. Note In the Manage System Data process step, in Extended Mode you can also: o Copy a system overview used previously o Assign an RFC connection o Create a consolidation group (for internal purposes) o Assign external systems (e.g. from an SAP HANA measurement) to a system Process Steps in Consolidation 2013 SAP AG or an SAP affiliate company. All rights reserved. 7

2.3.2 Managing Results To import results from individual component systems and the central LAW system, choose Import Result. Results can be imported in document formats.txt and.xml. Results from multiple systems can be saved as a zip archive and imported as a zip file. To enter results for usage of products that cannot be automatically calculated by the measurement program, choose Engine Usage Information. Note In the Manage Results process step, in Extended Mode you can also o manage RFC actions. 8 2013 SAP AG or an SAP affiliate company. All rights reserved. Getting Started with the License Administration Workbench 2.0 (LAW 2.0) Process Steps in Consolidation

2.3.3 Group Users In Group Users you can select a grouping attribute and put users into a group. When you select a different grouping attribute a new group is created and the previous group is deleted. Note In the Group Users process step, in Extended Mode you can also: o Create a grouping using an additional attribute o Assign external user attributes and use them as a grouping attribute Process Steps in Consolidation 2013 SAP AG or an SAP affiliate company. All rights reserved. 9

2.3.4 Consolidating Users To start the consolidation, choose Start New Consolidation. Note In the process step Consolidate Users, in Extended Mode you can also: o Use individual consolidation rules o Select the engines you want to display o Display a partial consolidation using a group consolidation created previously (partial consolidations are only for internal purposes. They cannot be transferred to SAP) o Maintain description of special users 10 2013 SAP AG or an SAP affiliate company. All rights reserved. Getting Started with the License Administration Workbench 2.0 (LAW 2.0) Process Steps in Consolidation

2.3.5 Analyzing Results Here you can display the results from different perspectives. This functionality can only be used if the Internet Graphics Service (IGS) is available and configured correctly. Process Steps in Consolidation 2013 SAP AG or an SAP affiliate company. All rights reserved. 11

2.3.6 Transferring Results You can select the following options here: Transfer result to SAP The result is sent directly to SAP. A confirmation of successful transfer is sent to the email address you entered. Save result locally The result can be saved locally as an.xml file and sent by e-mail to SAP. With these two options consolidation is completed and saved. The two functions Display PDF Log and Download XML Result can be performed any time after the consolidation was completed. To display the PDF Log the Adobe Document Services (ADS) must be available and configured correctly. 12 2013 SAP AG or an SAP affiliate company. All rights reserved. Getting Started with the License Administration Workbench 2.0 (LAW 2.0) Process Steps in Consolidation

www.sap.com/contactsap 2013 SAP AG or an SAP affiliate company. All rights reserved. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed without prior notice. Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors. National product specifications may vary. These materials are provided by SAP AG and its affiliated companies ( SAP Group ) for informational purposes only, without representation or warranty of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty. SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries. Please see www.sap.com/corporate-en/legal/copyright/index.epx#trademark for additional trademark information and notices.