United States Standards for Grades of Lettuce



Similar documents
Grapefruit Growing and Certification Requirements

Sweetpotatoes. Shipping Point and Market Inspection Instructions. United States Department of Agriculture. Agricultural Marketing Service

United States Standards for Grades of Christmas Trees

A guide for handling for cabbage, carrot, hot pepper, lettuce, sweet potato and tomato. Food and Agriculture Organization of the United Nations

Filbert/Hazelnut Kernels And Filberts In The Shell

Part 1: Knowing how to identify the problem. Author: Damon Polta, Friendly Aquaponics Farm Manager. For free distribution.

SECTION 36 - CAST-IN-PLACE CONCRETE PIPE (CIPCP) TABLE OF CONTENTS

Extending Shelf Life and Preserving Quality in Fresh Fruit & Vegetable Storage and Transport. Product Performance and Market Benefits

Harvesting and Preparing Vegetables for Exhibit

Extending Shelf Life and Preserving Quality in FF&V Shipping and Storage. Product Performance and Market Benefits

Pineapples. Ian Hewett Horticultural Marketing Inspectorate United Kingdom. Version - October 2011

DRAFT MALAYSIAN STANDARD

UNECE Standard on the marketing and commercial quality control of. Sweet Peppers. Explanatory Brochure

Scaling Up For Regional Markets Grading Standards and Wholesale Glossary of Terms

UNECE STANDARD FFV-52 concerning the marketing and commercial quality control of EARLY AND WARE POTATOES 2011 EDITION

GARDEN FACTS. When are apples ripe?

Kansas State University Agricultural Experiment Station and Cooperative Extension Service 1

4-02 Gravel Base Ballast and Crushed Surfacing

It is an important tool to assess factors that affect the bioavailability of a drug from a solid preparartion.

Onion & Leek Planting Guide

Why Fruit Trees Die D. B. Meador, Extension Specialist (retired) University of Illinois

PROCEDURE FOR FRESH APPLE AND PEAR EXPORTS FROM SOUTH AFRICA TO MEXICO. Responsibility: Service Manager: Special Shipments Name: Initial:

1.4 Metallic Impurities Iron must not exceed 150 ppm and copper shall not exceed 6 ppm when tested according to TAPPI T 266.

Jeremiah K.S. Dung Hermiston Agricultural Research and Extension Center Oregon State University

Department of Agriculture Controlled Atmosphere Storage Rules

The entire document shall be read and understood before proceeding with a test. ISTA 3B Page 1 of 35

Preserve Your Garden Delights: How to Can Fresh Vegetables

Best/Flex Roller Expandable Conveyor

Best Practices & Cake Decorating Manual

Munsell Soil Color. Munsell Gradient No. Code

Installation (Figure 1) (Figure 4) (Figure 5) (Figure 2) (Figure 3) (Figure 6)

CaribeanCommunity EDICTOFGOVERNMENT±

Pruning Fruit Trees. Develop strong tree structure. This should begin when trees are planted and continue each year thereafter.

UNECE STANDARD DDP-04 HAZELNUT KERNELS

SPECIFICATION FOR CONSTRUCTION OF UNBOUND GRANULAR PAVEMENT LAYERS

GRADATION OF AGGREGATE FOR CONCRETE BLOCK

Units of Measure and Conversion Factors for Forest Products

IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION. Generated: Sergiy Papyshev Engineering. Approved: Don Prysi Manufacturing. Approved: Merzuk Ramic Quality

PNEUMATIC - HIGH PRESSURE FLAT-FORM HEAVY LIFTING BAGS

1400 Independence Avenue, SW. Room 3932-S Washington, D.C Commodity Specification. Shelled Nuts. June 2012

Ten Easy Ways to Kill a Tree

Select Radiators Installation Guide

VialSafe. DHL VialSafe. UN3373 Packaging Solutions

Division 2 Section Section 02795

DIVISION 300 BASES SECTION 304 AGGREGATE BASE COURSE DESCRIPTION MATERIALS CONSTRUCTION REQUIREMENTS

Dry Bean Types and Development Stages

Foundation Experts, LLC Specializes in Foundation Repair and Waterproofing

Guidelines for the Safe Transport of Infectious Substances and Diagnostic Specimens

1805 Series Relief Valves

C. Section TESTING LABORATORY SERVICE.

The corrugated box: A profile and introduction

Transport and Mailing Systems

Active and Passive Sash Replacement

Wastewater Capital Projects Management Standard Construction Specification

Proper Handling of Eggs: From Hen to Consumption

SPECIFIC INSTRUCTIONS ON HOW TO PERIODICALLY CHECK FOR STRESS CRACKING CAUSED BY CHEMICALS, HANDLING ABUSE & ENVIRONMENTAL DEGRADATION

SPECIAL NOTE FOR ASPHALT WATERPROOFING MIX FOR BRIDGE-DECK OVERLAYS AND ADJACENT APPROACHES

COMMERCIAL ITEM DESCRIPTION INK, MARKING, STENCIL, OPAQUE (POROUS AND NON-POROUS SURFACES)

INSTRUCTION BOOK FOR. Lace And Grommet Theater-Type Screens

Window Installation Instructions

Repair of Hyd-ro-ac Actuators

Insulin Pens. Basic facts. What is insulin? What are the different types of insulin?

HOW TO PREPARE THE PERFECT PRIME RIB

Packaging Identification Standard

SECTION 55 PIPE FOR STORM DRAINS AND CULVERTS (FAA D-701)

Chapter D9. Irrigation scheduling

Corrugated Modular Systems for Case-Ready Meat

Economy Combo Heat Press Manual Model No.: ECH-800

Damage Reporting Procedures

COMMERCIAL ITEM DESCRIPTION PACKAGING MATERIAL, SHEET

NAPCA BULLETIN APPLICATION PROCEDURES FOR CONCRETE WEIGHT COATING APPLIED BY THE COMPRESSION METHOD TO STEEL PIPE

Sumitomo Electric Wiring Systems, Inc. Part Identification and Labeling Requirements

Horticulture Information Leaflet 33-E

Packaged-Products for Parcel Delivery System Shipment 70 kg (150 lb) or Less

Cooking A World of New Tastes

One block will put your name in the draw one time. Feel free to make more than one. There is no limit.

SECTION PERMEABLE INTERLOCKING CONCRETE PAVEMENT

Cavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.

EFFECT OF COLD STORAGE ON SOME FLORIDA AVOCADOS

1.1.2 Polypropylene The polypropylene must be a white opaque film, 1 2 mil thick. Biaxial orientation is preferred.

ASI/81350 PPAI/ UPIC: POLYPAK- SAGE

Agilent X/P/K281C Adapters

When looking for a diamond, keep in mind that if a diamond is cut poorly, it affects the brilliance; the number of facets a stone has

Hail Damaged Corn and Soybean

GENUINE PARTS INSTALLATION INSTRUCTIONS

Application Data Important Safety Information

PICTORIAL DIAGNOSTIC GUIDE Compiled by Gaye Hammond, Past President, Houston Rose Society 281/

EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS

CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS

USER MANUAL Stand Alone Power Supply PSQ 2909 / PSQ 3909 / PSQ 4909 PSQ 2920 / PSQ 3920 / PSQ 4920

The Power of Broccoli

HOME FREEZING GUIDE FOR FRESH VEGETABLES

1300 West Bartlett Road Elgin, Illinois Phone: (847) Fax: (847) SUBJECT: Pelican NP and NS Cab Glass Replacement

FARMEX HT-PRO OPERATING INSTRUCTIONS PORTABLE MOISTURE AND TEMPERATURE TESTER FOR BALED HAY

Net Factoring 2. January 1, 2007 Amendment No

(Adopted April 25, 2003, Amended May 22, 2009)

FRAGILE LABELS 3 Fragile 3 Fragile - Glass 4 Fragile - Liquid 5 DELICATE INSTRUMENT LABELS 5 ARROW LABELS 6 HOT - RUSH LABELS 6

OPTIMIZING CONDENSER WATER FLOW RATES. W. A. Liegois, P.E. Stanley Consultants, Inc. Muscatine, Iowa

When you buy a high-quality tree, plant it correctly, and treat it properly, you and your tree will benefit greatly in many ways for many years.

Transcription:

United States Department of Agriculture Agricultural Marketing Service Fruit and Vegetable Division United States Standards for Grades of Lettuce Fresh Products Branch Effective December 1, 1975 (Reprinted - January 1997)

United States Standards for Grades of Lettuce 1 Grades 51.2510 U.S. Fancy. 51.2511 U.S. No. 1. 51.2512 U.S. No. 2. Tolerances 51.2513 Tolerances. Application of Tolerances 51.2514 Application of tolerances. Precooling Requirements 51.2515 Precooling requirements. Standard Pack 51.2516 Standard pack. Standard Weight 51.2517 Standard weight. Solidity Classification 51.2518 Solidity classification. Definitions 51.2519 Similar varietal characteristics. 51.2520 Fresh. 51.2521 Green. 51.2522 Burst. 51.2523 Doubles. 51.2524 Fairly well trimmed. 51.2525 Closely trimmed. 51.2526 Reasonably trimmed. 51.2527 Cap leaf. 51.2528 Crown. 51.2529 Injury. 51.2530 Damage. 51.2531 Serious damage. 51.2532 Permanent defects. 51.2533 Condition defects. 51.2534 Classification of defects. 1 Packing of the product in conformity with the requirements of these standards shall not excuse failure to comply with the provisions of the Federal Food, Drug and Cosmetic Act or with applicable State laws and regulations. 1

Grades 51.2510 U.S. Fancy. "U.S. Fancy'' consists of heads of lettuce which meet the following requirements: (a) Basic requirements: (1) Similar varietal characteristics; (2) Fresh; (3) Green; (4) Not soft; (5) Not burst; (b) Free from: (1) Decay; (2) Russet spotting; (3) Doubles; (c) Free from injury by: (1) Tipburn; (2) Downy mildew; (3) Field freezing; (4) Discoloration; (d) Not damaged by any other cause. (e) Each head shall be fairly well trimmed unless specified as closely trimmed. (f) For tolerances see 51.2513. 51.2511 U.S. No. 1. "U.S. No. 1'' consists of heads of lettuce which meet the following requirements: (a) Basic requirements: (1) Similar varietal characteristics; (2) Fresh; (3) Green; (4) Not soft; (5) Not burst; (b) Free from: (1) Decay; (2) Doubles. (c) Not damaged by any other cause. (d) Each head shall be fairly well trimmed unless specified as closely trimmed. (e) For tolerances see 51.2513. 51.2512 U.S. No. 2. "U.S. No. 2'' consists of heads of lettuce which meet the following requirements: (a) Basic requirements: (1) Similar varietal characteristics; (2) Not burst; (b) Free from decay; (c) Not seriously damaged by any other cause; (d) Unless otherwise specified each head shall be reasonably trimmed. 2

(e) For tolerances see 51.2513. Tolerances 51.2513 Tolerances. In order to allow for variations incident to proper grading and handling the following tolerances, by count, shall be permitted in any lot: 2 (a) U.S. Fancy -- (1) For defects at shipping point. 8 percent for heads of lettuce which fail to meet the requirements of this grade: Provided, That included in this amount not more than 5 percent shall be allowed for soft heads: And provided further, That not more than 4 percent shall be allowed for defects causing serious damage; included in this latter amount not more than 1 percent for heads which are affected by decay on any portion of the head exclusive of the wrapper leaves. (2) En route or at destination. 12 percent for heads of lettuce which fail to meet the requirements of this grade: Provided, That included in this amount not more than the following percentages shall be allowed for defects listed: (i) 8 percent for heads having permanent defects including therein not more than 5 percent for soft heads; or, (ii) 6 percent for heads which are seriously damaged; including therein not more than 4 percent for heads seriously damaged by permanent defects and not more than 3 percent for heads which are affected by decay on any portion of the head exclusive of the wrapper leaves. (See 51.2514.) 2 (b) U.S. No. 1 -- (1) For defects at shipping point. 8 percent for heads of lettuce which fail to meet the requirements of this grade: Provided, That included in this amount not more than 5 percent shall be allowed for soft heads: And provided further, That not more than 4 percent shall be allowed for defects causing serious damage, included in this latter amount not more than 1 percent for heads which are affected by decay on any portion of the head exclusive of the wrapper leaves. (2) En route or at destination. 12 percent for heads of lettuce which fail to meet the requirements of this grade: Provided, That included in this amount not more than the following percentages shall be allowed for defects listed: (i) 8 percent for heads having permanent defects including therein not more than 5 percent for soft heads; or, (ii) 6 percent for heads which are seriously damaged; including therein not more than 4 percent for heads seriously damaged by permanent defects and not more than 3 percent for heads which are affected by decay on any portion of the head exclusive of the wrapper leaves. (see 51.2514.) 2 (c) U.S. No. 2 -- (1) For defects at shipping point. 8 percent for heads of lettuce which fail to meet the requirements of this grade: Provided, That included in this amount not more than 3 percent shall be allowed for heads which are affected by decay on any portion of the head exclusive of the wrapper leaves. (2) En route or at destination. 12 percent for heads of lettuce which fail to meet the requirements of this grade: Provided, That included in this amount not more than the following 2 Shipping point, as used in these standards, means the point of origin of the shipment in producing area or at port of loading for ship stores or overseas shipment, or, in the case of shipments from outside the continental United States, the port of entry into the United States. 3

percentages shall be allowed for defects listed: (i) 8 percent for heads having permanent defects; or, (ii) 5 percent for heads which are affected by decay on any portion of the head exclusive of the wrapper leaves. (See 51.2514.) Application of Tolerances 51.2514 Application of tolerances. (a) In order to meet the requirements of a specified grade the average percentage of defective specimens in the lot, based on sample inspection shall be within the tolerances specified, and the number of defective specimens in individual packages in the lot shall be within the limitations set forth in the following table: Table I -- Maximum Number of Defective Heads Permitted in Any Package Lot tolerance, percent Total number of heads in package 24 18 or 20 30 Over 30 1 1 1 2 2 3 3 2 3 4 4 3 3 4 4 5 3 3 4 5 6 4 3 5 6 8 5 4 6 7 12 6 5 7 9 Precooling Requirements 51.2515 Precooling requirements. The following precooling requirements may be used in certifying lettuce in the producing area: (a) Lettuce certified as meeting "Precooling Requirements'' in the producing area shall have a core temperature of not more than 36E F (2.2 E C) when placed in a refrigerated conveyance or storage. (1) The temperature shall be taken near the center of the head with a thermometer which has previously been cooled to the approximately temperature of the lettuce. Standard Pack 51.2516 Standard pack. (a) Heads of lettuce shall be fairly uniform in size, and fairly tightly to tightly packed but not excessively tightly packed in uniform layers in the container according to the approved and recognized methods; except that in standard fiberboard containers a "bridge'' of 6 heads may be placed between the layers in a 2 1/2 dozen pack. (1) Fairly uniform in size means that not more than 10 percent, by count, of heads in any container may vary appreciably in size from the standard size head for the count pack. 4

(i) The standard size head for a 2 dozen pack is that size head, having 4 wrapper leaves, which will pack tightly but not excessively tightly, 3 rows with 4 heads of uniform size in each row in a layer in a standard fiberboard container. Heads having lesser or greater numbers of wrapper leaves which can be packed as specified herein are considered equivalent in size to a standard size head with 4 wrapper leaves. (2) Excessively tightly packed means that heads are packed so tightly as to cause distortion, or crushing of the heads or breaking of the midribs. (b) When heads of lettuce are wrapped no head may have more than 1 wrapper leaf. (c) In order to allow for variations incident to proper packing not more than a total of 10 percent of the containers in any lot may fail to meet the requirements of standard pack. Standard Weight 51.2517 Standard weight. (a) The following weight requirements may be used in connection with grade. (1) Lettuce packed in a standard lettuce containers shall have a net weight of not less than 42 pounds (19 kg) and not more than 50 pounds (23 kg). (b) In order to allow for variations incident to proper packing, not more than a total of 5 percent of the containers in any lot may fail to meet the requirements of standard weight. Solidity Classification 51.2518 Solidity classification. (a) Solidity of lettuce may be specified in connection with the grade in accordance with any of the following classification: (1) Hard. "Hard'' means that the head is compact and solid. This term represents the highest degree of solidity. (2) Firm. "Firm'' means that the head is compact, but may yield slightly to moderate pressure. (3) Fairly firm. "Fairly firm'' means that although the head is not firm, it is not soft and spongy, and has good head formation. (4) Soft. "Soft'' means that the head is easily compressed or spongy. Definitions 51.2519 Similar varietal characteristics. "Similar varietal characteristics" means that the heads in any container have the same characteristic leaf growth. For example, lettuce of the Iceberg and Big Boston types shall not be mixed. 51.2520 Fresh. "Fresh" means that the head as a whole has normal succulence and the wrapper leaves and the outermost head leaves are not more than slightly wilted. 51.2521 Green. "Green" means that one-half or more of the exterior surface of the head, exclusive of the wrapper leaves, has at least a light green color. 3 51.2522 Burst. "Burst" means that the head is split or broken open. 3 The color referred to is illustrated by plate 5 GY 8/6 in the Munsell Book of Color. Individual plates of the above color may be purchased from the Munsell Color Co., 2441 North Calvert, Baltimore, Md. 21218. 5

51.2523 Doubles. "Doubles" means two heads on the same stem. 51.2524 Fairly well trimmed. "Fairly well trimmed" means that the butt is trimmed off closely below the point of attachment of the outer leaves, and that on a head of Iceberg type lettuce, wrapper leaves do not exceed 7 in number. 51.2525 Closely trimmed. "Closely trimmed" means that the butt is trimmed off closely below the point of attachment of the outer leaves, and that on a head of Iceberg type lettuce, wrapper leaves do not exceed 3 in number. 51.2526 Reasonably trimmed. "Reasonably trimmed" means that the butt is trimmed off closely below the point of attachment of the outer leaves, and that on a head of Iceberg type lettuce, wrapper leaves do not exceed 12 in number. 51.2527 Cap leaf. "Cap leaf" is the first head leaf. This is the outermost leaf which fairly closely enfolds the compact portion of the head, some portion of which extends to the top of the crown. The tip of the leaf may be separated from the head, Provided, That the separation does not extend more than 1 1/4 inches (31.8 mm) in height from the compact portion of the head. (See figure 1.) (a) All leaves outside of the cap leaf are wrapper leaves. (b) On elongated or pointed heads the inner leaves that closely enfold the head three-fourths of their length are head leaves. 51.2528 Crown. "Crown" means the upper half of the head. (See figure 1.) 51.2529 Injury. "Injury" means any specific defect described in 51.2534, Tables II and III, or an equally objectionable variation of any one of these defects, any other defect, or any combination of defects, which noticeably detracts from the appearance, or the edible or marketing quality of the lettuce. 51.2530 Damage. "Damage" means any specific defect described in 51.2534, Tables II and III, or an equally objectionable variation of any one of these defects, any other defect, or any combination of defects, which materially detracts from the appearance, or the edible or marketing quality of the lettuce. 51.2531 Serious damage. "Serious damage" means any specific defect described in 51.2534, Tables II and III, or an equally objectionable variation of any one of these defects, any other defect, or any combination of defects, which seriously detracts from the appearance, or the edible or marketing quality of the lettuce. 51.2532 Permanent defects. "Permanent defects" means defects which are not subject to change during shipment or storage, including but not limited to soft, burst, open or poorly trimmed heads, seedstems or dirt. 6

51.2533 Condition defects. "Condition defects" means defects which are subject to change during shipment or storage, including but not limited to decay, tipburn, russet spotting, pink rib, rib discoloration, and freezing injury. 51.2534 Classification of defects. Table II -- At Shipping Point 2 Defect Injury Damage Serious damage Tipburn More than 2 spots of Aggregate area of tipburn Aggregate area of tipburn tipburn occurring occurring anywhere in the occurring anywhere in the anywhere in the compact compact portion of the head compact portion of the head portion of the head or exceeds a rectangle 1-inch (25.4 exceeds that of a rectangle 3- the aggregate area of mm) in length and 1/2-inch (12.7 inches (76.2 mm) in length discernible tipburn, mm) in width and 1-inch (25.4 mm) in regardless of color, width. exceeds that of a rectangle 1-inch (25.4 mm) in length and 1/4- inch (6.4 mm) in width Downy mildew Occurring on any head Readily apparent on any head Materially detracting from the or wrapper leaf leaf; when mildew not appearance or shipping quality accompanied by discoloration is of any head leaf; mildew not readily apparent on more than 2 accompanied by discoloration wrapper leaves, or discoloration is readily apparent on more associated with mildew is readily than 3 wrapper leaves, or apparent on any wrapper leaf discoloration associated with mildew is readily apparent on more than 2 wrapper leaves. Opening In a hard or firm head when 1/4 or more of the head is separated from the remainder, or any degree of opening in a fairly firm head Seedstems Excessively long, excessively Causing the head to split or curved, tough or fibrous. (see when protruding through the figures. 2 and 3) outer head leaves. Broken midribs More than 2 head leaves have More than 4 head leaves have midribs broken in 2 due to midribs broken in 2 due to abnormal growth abnormal growth. Russet spotting Present in any degree Present in any degree Present in any degree. 2 Shipping point, as used in these standards, means the point of origin of the shipment in the producing area or at port of loading for ship stores for overseas shipment, or, in the case of shipments from outside the continental United States, the port of entry into the United States. 7

Pink rib Occurring on any head Ribs of more than 2 head leaves Areas of deep pink color leaf show areas of deep pink color seriously detracts from the more than 2-inches (50.8 mm) in appearance or the edible length or when causing more than quality of more than 2 head 2 head leaves to be excessively leaves. papery and tough Rib discoloration Occurring on any head Aggregate length of brown or Seriously detracting from the leaf black spots on outer surface of appearance or the edible any head leaf exceeds 1 inch quality of more than 2 head (25.4 mm)... leaves. Dirt Compact portion of the head is smeared with mud, or wrapper leaves are badly smeared with mud, or when the basal portion is caked with mud or dry dirt Insects and worms Compact portion of the head is Compact portion of the head is infested, or the wrapper leaves are infested, or the wrapper leaves badly infested with insects or are badly infested with insects worms, or there is feeding injury or worms, or there is feeding on the compact portion of the injury on more than 2 head head leaves Field Freezing Any peeling, feathering Peeling or feathering extends over or yellow or brown more than 3/4 the area of the discoloration resulting crown on more than 2 head leaves from field freezing is or yellow or brown discoloration readily apparent on any resulting from field freezing outer head leaf extends over more than 1/2 of the crown, or the wrapper leaves are seriously damaged by discoloration resulting from freezing Discoloration Any 1 of the following Any 1 of the following types or a Any 1 of the following types, (other than caused types or a combination combination of 2 or more types or a combination of 2 or more by freezing) of 2 or more types the the seriousness of which exceeds types the seriousness of which seriousness of which the maximum allowed for any 1 exceeds the maximum allowed exceeds the maximum type for any 1 type. allowed for any 1 type (1) Yellow or brown (1) Yellow or brown affecting any (1) Yellow or brown, affecting discoloration from any portion of the leaf, or when any portion of the leaf, or very cause affecting any seriously detracting from the seriously detracting from the portion of the leaf, or appearance of the wrapper leaves appearance of the wrapper when materially leaves detracting from the appearance of the wrapper leaves 8

(2) Yellow or brown (2) Yellow or brown, materially (2) Yellow or brown, discoloration from any detracting from the appearance of seriously detracting from the cause when readily the head exclusive of the wrapper appearance of the head leaves apparent on the compact leaves. exclusive of the wrapper portion of the head... leaves... (3) Discoloration (3) Discoloration following (3) Discoloration following following bruising bruising materially detracting bruising seriously detracting noticeably detracting from the appearance of more than from the appearance of more from the appearance of 2 outer head leaves. than 2 outer head leaves more than 2 outer head leaves Table III -- (En Route or at Destination) Defect Injury Damage Serious damage Tipburn. Aggregate area of Aggregate area of tipburn of a Aggregate area of tipburn of a 4 tipburn of a light buff 4 light buff or darker color 4 light buff or darker color or darker color exceeds occurring anywhere in the occurring anywhere in the that of a rectangle 1 inch compact portion of the head compact portion of the head (25.4 mm) in length and exceeds a rectangle 1 inch (25.4 exceeds that of a rectangle 3 1/4 inch (6.4 mm) in mm) in length and 1/2 inch (12.7 inches (78.2 mm) in length width. mm) in width. and 1 inch (25.4 mm) in width. Downy mildew. Any that is readily Materially detracting from the Materially detracting from the apparent on any head appearance of any head leaf or appearance of more than 2 leaf or discoloration seriously detracting from the head leaves or seriously associated with mildew appearance of more than 2 detracting from the is readily apparent on wrapper leaves. appearance of the wrapper more than 2 wrapper leaves. leaves. Pink rib. More than 2 head leaves See Table II. See Table II. having midribs showing noticeable areas of pink color as viewed on the outer surface of the leaf or when causing any head leaf to be excessively papery and tough. 4 The color referred to is illustrated by plate 10 YR 8/4 in the Munsell Book of Color. Individual plates of the above color may be purchased from the Munsell Color Co., 2441 North Calvert Street, Baltimore, Md. 21218. 9

Russet spotting. Present in any degree. Present in any degree on more The number, size, and color of than 2 outer head leaves, or when the spots seriously detracts the number, size, and color of the from the appearance of 2 or spots materially detracts from the more head leaves. appearance of any head leaf. Rib discoloration. Any distinct brown or See Table II See Table II. black spots or rib discoloration present on the outer surface of any head leaf. Note: For classification of the following defects refer to Table II: opening, seedstems, broken midribs, field freezing, discoloration, and dirt. 10

Figure 1 11

Figure 2 Figure 3 12