Nansulate Sustainable Coatings Contractor Package

Nansulate Sustainable Coatings Contractor Package Industrial Nanotech, Inc. 1925 Trade Center Way Ste. 1 Naples, Florida 34109 800-767-3998 contact@nansulate.com Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 1 of 20

Introduction Nansulate thermal insulation coatings offers you an exclusive energy saving opportunity for your customers. Industrial Nanotech has developed parented nanotechnology based, paint-on residential and commercial insulation. This guide is designed to: Introduce you Nansulate thermal insulation coating materials and applications Provide you with simple value propositions you can present to your customers Serve as a reference handbook in addition to Industrial Nanotech s 24/7 service commitment. Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 2 of 20

Opportunities for Painting Contractors Energy prices are spiking and companies are actively seeking energy saving measures. Create a win/win situation for you and your customers by offering Nansulate Energy Saving Coatings solutions as an added component to your business. By adding Nansulate Coatings to your offerings, you can: Capitalize on new and innovative technology Increase the scope of your services by branching into energy saving and sustainable product solutions Offer your past, present and future customers a value proposition with short payback time Receive client installation referrals from Industrial Nanotech Nansulate thermal insulation and asset protection coatings provide sustainable solutions for multiple industries, such as industrial, petroleum and energy, commercial buildings, residential and specialty sectors. Become part of our National Referral Network by promoting Nansulate coatings to capitalize on the growing sustainability market and offer energy efficiency solutions for industrial and commercial clients. Expand Your Services Commercial/Residential: Industrial: Building Energy Efficiency Coatings Insulation of Water Tanks & Pipes Installer of Low VOC Coatings Clear UV Protective Coatings Nanotechnology Coatings Industrial Insulation Coatings Energy Efficiency Coatings for Steam Systems Corrosion Prevention Coatings Safety Coatings for Reducing Burn Injuries Exterior, Weather Resistant Insulation Specialty: Clear Lead Encapsulation Mold Resistant Coatings UV Protective Coatings Retrofit Restoration Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 3 of 20

Make More Green with Green Offering Nansulate energy saving coatings allows you to profit from the product and the installation. Painting contractors can purchase at 10% below our published U.S. price. The typical application for walls, ceilings, attic and roofs is a three coat coverage, with each coat being applied at 4 wet mils in thickness. Once completely dry, each coat is 50% of the applied thickness, the application would measure approximately 6 mils overall in dry film thickness. The coatings are applied with standard paint application equipment (airless or H.V.L.P. sprayer, brush or roller) and are non-toxic and water-based for easy cleanup. Full Nansulate Application Handbook: http://www.nansulate.com/pdf/nansulate_application_handbook.pdf Nansulate Crystal - Roof Insulation Application Handbook: http://www.nansulate.com/pdf/nansulate_roof_application_instructions.pdf An online square foot calculator for walls, ceilings and pipes can be found here: http://www.nansulate.com/square_foot_calculator.htm A reference sheet for tips on calculating roof square footage can be found here: http://www.nansulate.com/pdf/roof_calculation_tips.pdf Ordering Lead Time: To ensure product has time to ship to your job, please order at least 10 to 14 days prior to the date you need the product. If you are ordering 100 or more gallons of one product, please order 30 to 45 days ahead. We can ship directly to the job site or to your location. You make more Green by helping people save it for themselves! Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 4 of 20

Application Form Returning it to us at: Email: contact@nansulate.com or Fax: 239-254-1381 I am interested in promoting Nansulate sustainable coating solutions to my customers and becoming a member of your National Contractor Referral Network. Company Name: Contact Name: Email: Phone: Fax: Website: Address: City: State: Postal Code: Market Sectors that you work in are: What is your preference with quoting? We quote installation alone No preference, we can quote either way We quote product & installation (we prefer to purchase the materials ourselves) Do you currently represent insulation solutions? Yes No Approximate number of accounts: Number of Applicators on Staff: What geographical areas do you service/would you be able to bid for projects in: Typical lead time for returning a project quote: Questions that you have for us: Preference of day/time for an introductory Nansulate Sustainability Simplified Webinar for your team: Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 5 of 20

Marketing Support Form Painting Contractor Company: Contact Name: PH: Email: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Would you like to market Nansulate solutions to past clients and present customers? Y N If Yes, please check all below that you would be interested in doing: Postcards Brochure Mailer Phone Calls Content for your own Email Newsletter An Email Newsletter created for you An article for your company blog or mailed newsletter A co-branded Webinar hosted by Industrial Nanotech specifically for your customers Would you like assistance in generating lists or targeting new potential Nansulate clients in your region? Y N We look forward to supporting you in generating new business! Industrial Nanotech, Inc. - 800-767-3998 - www.nansulate.com p. 6 of 20

Have You Heard About the Benefits of Nanotechnology? The Nansulate Product Line is Providing Energy Saving Solutions Powered by Innovative Science! Building Energy Efficiency Coatings Nansulate Energy Protect :!!!! Order Online: $84.95 (1 gal) /$424.75 (5 gal) Commercial Insulation and Protective Coating for Building Energy Efficiency Nansulate Energy Protect clear thermal insulation and mold resistance coating, insulates and reduces energy use in an easy to apply, environmentally friendly coating. The product is designed to increase thermal resistance of windows, walls, ceilings, and skylights of commercial buildings and facilities. It can be used over pre-painted walls, without changing the look and can also be painted over with another water-based paint. On windows, the coating allows through approximately 92% of visible light and frosts windows for security. It is used over many types of building surfaces such as brick, drywall, finished walls, wood, stucco, concrete and more. This nanotechnology-based coating is non-toxic, low odor, and low voc, and is easily applied with standard paint sprayers, roller, or brush. Insulates surfaces while also protecting them from mold growth, moisture, and UV light. Indoor or outdoor use. Breathable, will not interfere with ventilation. Perfect retrofit insulation for older buildings and solid wall construction. Short return on investment, with average reported energy savings of 15-30 percent. www.energyprotect.org. Nansulate HomeProtect Clear Coat:!!! Order Online: $79.95 (1 gal) /$399.75 (5 gal) Residential Insulation & Mold Resistant Coating Nansulate HomeProtect Clear Coat insulation and mold resistant coating by Industrial Nanotech, Inc. was created for insulation of walls, ceilings, and attics to reduce energy costs for heating and cooling. Insulates and protects with a moisture, mold, and UV resistant formula that also reduces heat transfer to lower energy demand. Easy Do-it-yourself application with a brush, roller, or sprayer. The coating is clear with a matte finish, and insulates without changing the look of the underlying surface. Interior or exterior use. Can be painted over. This clear coating is water-based, non-toxic, low odor, and low voc. Breathable, will not interfere with building ventilation. Resistant to growth of mold without use of harsh chemicals. Reduces direct thermal conduction and thermal bridging, lowering cooling bills in the summer as well as heating bills in the winter. Short return on investment, with average reported energy savings of 15-30 percent. www.nansulate.com/ homeprotect.htm Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 7 of 20

Nansulate Crystal:!!!!!! Order Online: $89.95 (1 gal) /$449.75 (5 gal) Clear Roof Insulation & Mold Resistant Coating Nansulate Crystal insulation and mold resistant coating by Industrial Nanotech, Inc. was created for insulation of sloped roofs made of concrete, clay or slate tile and wood or asphalt shingles, to reduce energy costs. Insulates and protects with a moisture, mold, and UV resistant formula that also reduces heat transfer to lower energy demand. Easily applied with a brush, roller, or sprayer the coating is clear with a matte finish, and insulates without changing the look of the roof. This clear coating is water-based, non-toxic, low odor, and low voc. Lowers energy consumption by reducing heat conduction for residential homes and commercial buildings. Resistant to growth of mold and algae, helping to keep roof clean longer. Reduces direct thermal conduction, lowering cooling bills in the summer as well as heating bills in the winter. www.nansulateroof.com Industrial Energy Efficiency Coatings Nansulate EPX:!!!!! Order Online: $290.00 (2 gal kit) /$725.00 (5 gal kit) Chemical Resistant Epoxy Insulation Coating Nansulate EPX insulation, corrosion prevention, chemical and flame resistant coating by Industrial Nanotech, Inc. was created for insulation of pipes, tanks, and equipment to reduce energy costs and stand up to harsh environments. This twopart epoxy formula is splash resistant to acids, bases, and fuels and also reduces heat transfer to lower energy demand. Easily applied with a texture sprayer, trowel or stiff brush while equipment is in-service. This textured coating is water-based, low odor, and low voc. Insulate surfaces up to 400F, including steam pipes, boilers, valves, heat exchangers, ovens, chilled water pipes, and more. Use for both metal (with Nansulate High Heat primer) and non-metal surfaces. Hard, durable finish stands up well to humid environments. Lowers energy consumption, reduces surface temperature for worker safety and lowers heat emitted into the environment by hot equipment. Short return on investment, typically 1 year or less, with average reported energy savings of 20 percent. www.nansulate.com/ nansulate_epx_system.htm EPX NanoPrime :!! Order Online: $94.95 (1 gal) /$474.75 (5 gal) Insulating and Corrosion Resistant Primer for Nansulate EPX Used as a primer for Nansulate EPX at a 4-coat coverage (4 mils/100 microns per coat). Can also be used at 1-coat as a UV resistant top coat if the Nansulate EPX application is outdoors or subject to UV light. Must be used when EPX is applied to metal and non-porous surfaces. Excellent adhesion qualities. Industrial Nanotech, Inc. - 800-767-3998 - www.nansulate.com p. 8 of 20

Nansulate High Heat:!!!!! Order Online: $94.95 (1 gal) /$474.75 (5 gal) High Heat Thermal Barrier and Corrosion Prevention Coating Nansulate High Heat insulation and corrosion prevention coating by Industrial Nanotech, Inc. was created for insulation of pipes, tanks, and equipment to reduce energy costs and insulate components with a thermal blanket. Can be sprayed onto valves, cookers, and other previously difficult to insulate surfaces. Easily applied with a paint sprayer, brush or roller while equipment is in-service. This clear/opaque coating is water-based, low odor, and low voc. Insulate surfaces up to 400F, including steam pipes, boilers, valves, heat exchangers, ovens, and more. Direct to metal with superior corrosion prevention abilities. Durable finish stands up well to humid environments. Lowers energy consumption, reduces surface temperature for worker safety and lowers heat emitted into the environment by hot equipment. Short return on investment, typically 1 year or less, with average reported energy savings of 20 percent. www.nansulate.com/nansulate_translucent_hh.htm Nansulate Translucent PT:!!!! Order Online: $84.95 (1 gal) /$424.75 (5 gal) Clear Insulation and Corrosion Prevention Coating Nansulate Translucent PT insulation and corrosion prevention coating by Industrial Nanotech, Inc. was created for insulation of pipes, tanks, and equipment to reduce energy costs and provide long-term surface protection. Superior option for exterior tanks and pipes, stands up extremely well to weathering and maintains performance. Easily applied with a paint sprayer, brush or roller while equipment is in-service. This clear coating is water-based, low odor, and low voc. Insulate surfaces up to 256F, including tanks, pipes, silos, ovens, and more. Direct to metal with superior corrosion prevention abilities. Durable finish stands up well to humid environments. Lowers energy consumption, reduces surface temperature for worker safety and lowers heat emitted into the environment by hot equipment. Short return on investment, typically 1 year or less, with average reported energy savings of 20 percent. www.nansulate.com/nansulate_translucent_pt.htm Nansulate Translucent GP-NSF:!!!! Order Online: $92.95 (1 gal) /$464.75 (5 gal) NSF Registered Thermal Insulation and Mold Resistant Coating Nansulate Translucent GP-NSF - insulation and mold resistant coating by Industrial Nanotech, Inc. was created for insulation of food processing equipment and food sensitive environments to reduce energy costs. Insulates cleanly with a moisture, mold, and corrosion resistant formula. Easily applied with a brush, roller, or sprayer while equipment is in-service. This clear coating is water-based, nontoxic, low odor, and low voc. Insulate surfaces up to 256F, including ovens, cookers, hot water tanks, hot water pipes, dryers, and more. Use for both metal and nonmetal surfaces. NSF non-food compound registered as safe for use on incidental food contact surfaces. Lowers energy consumption, reduces surface temperature for worker safety and lowers heat emitted into the environment by hot equipment. Short return on investment, typically 1 year or less, with average reported energy savings of 20% percent. www.nansulate.com/nansulate_translucent_gp.htm Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 9 of 20

Specialty Coatings Nansulate LDX:!!!!!! Order Online: $89.95 (1 gal) /$449.75 (5 gal) Clear Lead Encapsulation Coating Nansulate LDX lead encapsulation and mold resistant coating by Industrial Nanotech, is a clear coating for encapsulation of lead based paint and lead contaminated surfaces. Safely encases surfaces, and is water-based, low VOC and environmentally friendly. The clear, matte finish allows it to be used without changing design aesthetics. Easily applied with a brush, roller, or sprayer in a 2-coat coverage. 20-year warranty for interior lead encapsulation. In addition to providing a thin film, clear lead abatement option, the coating is also resistant to moisture and mold growth. www.nansulate.com/nansulate_ldx.htm Nansulate Solar:!!!!!! Order Online: $94.95 (1 gal) /$474.75 (5 gal) Solar Thermal Insulation Coating Nansulate Solar insulation coating by Industrial Nanotech, is a clear coating for insulation of solar collectors, hot water heaters and piping. Easily applied with a paint sprayer, brush or roller while equipment is in-service. This clear/opaque coating is water-based, low odor, and low voc. Insulates surfaces up to 400F to reduce heat loss and improve efficiency for solar thermal systems. Easily applied over a variety of solar thermal equipment as a thin film thermal barrier for improved performance. www.nansulatesolar.com NanoBoost :!!!!!!!! Order Online: $41.20 (1 quart) Automotive Parts Insulation and Corrosion Prevention Coating NanoBoost insulation and corrosion prevention coating by Industrial Nanotech, is a clear coating for insulation of automotive parts such as: intake manifold, engine compartment, fuel tank and lines, interior ceiling. Easily applied with a paint sprayer, brush or roller, for improved engine performance for increased horsepower and improved fuel efficiency. This clear/opaque coating is water-based, low odor, and low voc. Insulates surfaces up to 400F to reduce heat loss and improve efficiency. Easily applied over a variety of automotive parts as a thin film thermal barrier for improved performance. www.nansulate.com/nanoboost.htm Industrial Nanotech, Inc. - 800-767-3998 - www.nansulate.com p. 10 of 20

Nansulate Cool Ride:!!!!!!! Order Online: $41.20 (1 quart) Liquid Heat Shield Coating for Motorbike Exhausts and Mufflers Nansulate Cool Ride protective insulation and corrosion prevention coating by Industrial Nanotech, is a thermal coating for hot areas of motorcycles, motorbikes, and ATVs such as the exhaust pipes and muffler to lower the surface temperature and reduce risk of burn injuries. Easily applied with a paint sprayer, brush or roller, the application can be done two ways to allow versatility of riding. This clear/opaque coating is water-based, low odor, and low voc. Insulates surfaces up to 400F to reduce heat loss and lower surface temperature. The application can be tailored to your equipment needs. For example, a 350F surface can be reduced to a 140F (OSHA safe touch level) - a 60% reduction; And a 250F surface can be reduced to the same 140F temperature with the recommended application - a 44% reduction.. www.coolridetech.com Nansulate Bee Protect:!!!!! Order Online: $84.95 (1 gal) /$424.75 (5 gal) Insulation and Protective Coating for Beehives Nansulate Bee Protect insulation and mold resistant coating by Industrial Nanotech, is a clear coating for insulation and protection of beehives to create a more temperature environment. Easily applied with a paint sprayer, brush or roller, this coating is NSF registered as safe for incidental food contact surfaces. This coating is water-based, low odor, and low voc. Insulates to reduce heat loss/gain and offers mold resistance without use of harsh chemicals. UV/moisture resistant to protect hives from weathering. A more temperate hive environment can improve overall bee health and promote increased brood production. www.beeprotect.org ABOUT THE NANSULATE COATING LINE Nansulate coatings have been used by and are a trusted solution of: The U.S. Navy, U.S.Army, U.S. Army Corps of Engineers, American Red Cross, City of San Jose California, Lafayette Consolidated Government in Louisiana, Tampa Port Authority, Coats plc, Frost Art Museum, Child Family Services, Seattle Museum of Flight, IMSS (Mexico Social Security Administration), University of Wisconsin, Norman Rockwell Museum, Holiday Snacks, and many others. TO LEARN MORE, VISIT: Industrial Case Studies: http://www.nansulate.com/nansulate_industrial_casestudies.htm Green Building Case Studies: http://www.nansulate.com/nansulate_green_building_casestudies.htm Recent News Features: http://www.nansulate.com/nansulate_news.htm Press Releases: http://www.industrial-nanotech.com/pressroom.htm CONTACT US AT: 800-767-3998 contact@nansulate.com Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 11 of 20

Best Places to Insulate When insulating a home you want to create a barrier around the envelope - or 'shell' of the house. This includes exterior walls and either the attic or ceilings or roof. Basement walls and crawl spaces are also areas where heat can be lost or gained. You are creating a thermal envelope which reduces heat transfer and lowers heating and cooling costs. The illustration shows some of the major areas in a home where heat loss happens. Heat always transfers to cold, so in the winter the heat inside is trying to get out, and in the summer, the heat outside is trying to get in. No matter which direction the heat transfer is going - Nansulate helps to greatly reduce it. Combat Thermal Bridging Nansulate combats thermal bridging because the coatings can be applied to surface areas where heat loss/gain is an issue due to conduction through materials like building studs. Thermal bridging occurs in building envelopes when relatively high thermal conductivity materials such as steel and concrete create pathways for heat loss. Thermal bridging happens through the wall studs where traditional insulation cannot be used. Nansulate thermal insulation coating over the entire wall surface greatly reduces heat flow through those thermal bridging areas. Industrial Nanotech, Inc. - 800-767-3998 - www.nansulate.com p. 12 of 20

Project Examples - Tulsa, OK Nansulate HomeProtect Clear Coat was applied via airless sprayer to the underside of the 2772 S.F. home s roof deck (on roof of attic and ceilings of rooms where attic application was not applicable). Application was the recommended coverage of three coats (each coat applied at 4 wet mils) for an overall completely dry film thickness of approx. 6 mils. Percentage of Energy Savings Achieved: 46% average reduction in energy use, consistent over three years post-application. (Adjusted down by 3% to allow for margin of error) Download full case study: www.nansulate.com/pdf/casestudies/gdavis_casestudy.pdf Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 13 of 20

Project Examples - Fairbanks, AK Nansulate Reduces Heating Costs by 22% in Cold Climate of Fairbanks, Alaska Business owner Dan Sherman shared his heating bills before and after using Nansulate on his commercial warehouse. He applied Nansulate HomeProtect Clear Coat on the interior building envelope of his 1250 S.F. commercial warehouse with 16 foot ceilings. The coating was installed at 3 coats (each coat applied at 4 wet mils) for an overall completely dry film thickness of approx. 6 mils.. It was coated on all four walls and the ceiling of the warehouse. Results: I saved 22% off my heating consumption. A savings of $600 for the year. I am so happy. -Dan Sherman Military and Civilian Auto Sales Fairbanks, Alaska, USA Download full case study: www.nansulate.com/pdf/casestudies/case_study_alaska_warehouse.pdf Industrial Nanotech, Inc. - 800-767-3998 - www.nansulate.com p. 14 of 20

Project Examples - Dallas, TX uncoated temperature. Nansulate Translucent GP was used to coat the ceiling of the attic. The house was 4000 square feet with extremely high pitch roof line. The area of the attic was a little over 3000 s.f. The owner of the house put thermometers in the attic monitoring the heat throughout the day. During the late afternoons with the outside temperature at 104 F, the inside of the attic was 143 F. The initial application covered 1/3 of the attic with 3 coats and 2/3 of the attic with 2 coats. The crew returned two weeks later to apply the 3rd coat the rest of the attic. They noted that the temperature outside was 103 F, (it was 3 hours earlier than the first application and at the peak of the heat for the attic). The temperature of the attic was 101 F, a 42 degree drop from the Download full case study: www.nansulate.com/pdf/casestudies/casestudy_house_attic.pdf Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 15 of 20

Frequently Asked Questions Below are some often asked questions that you can refer to when you need a quick answer. What do the coatings look like? Are they clear? Can they be tinted? A. Nansulate HomeProtect Clear Coat, Nansulate Crystal, Nansulate Energy Protect, Nansulate LDX, and Nansulate Translucent High Heat are all translucent and will be fairly invisible over most surfaces, except for glass. The coatings have a matte finish, and will sometimes give surfaces a slight sheen. Because they are clear, they cannot be tinted. What is my customer s product cost per S.F.? A. For HomeProtect Clear Coat (.53 cents per S.F. @ the recommended 12 mils wet film thickness - 3 coats) For Nansulate Energy Protect (.57 cents per S.F. @ the recommended 12 mils wet film thickness - 3 coats) For Nansulate Crystal (.40 cents per S.F. @ the recommended 8 mils wet film thickness - 2 coats) For Nansulate LDX (.40 cents per S.F. @ the recommended 8 mils wet film thickness - 2 coats) For Nansulate Translucent High Heat ($2.11 per S.F. @ the typical 40 mils wet film thickness - 10 coats) Are there any toxic fumes or smell? A. No, the coatings do not contain any toxic ingredients and are considered environmentally friendly. They will have a slight wet paint smell when applied, which will go away as they dry. They are low VOC (100 g/l), non-toxic, and non-flammable. How do I know I have the correct thickness? A. We suggest measuring each coat as it is applied with a Wet Film Thickness Gauge to ensure you have the correct coverage for your application. For surfaces over 212F (100C) a Dry Film Thickness Gauge should be used. Be sure to refer to the Nansulate Application Handbook and the Nansulate Crystal Application Handbook prior to application of the coatings for full application details. How easy is it to apply? A. The coatings are applied like a paint. You can use standard paint application equipment, airless paint sprayer (at low pressure) or H.V.L.P. sprayer, or a brush or roller. You will want to apply each coat at approximately 4 mils in wet film thickness. It is important not to apply the coats too thick, or you will see cracking and loss of adhesion as it s drying. As a visual aid: When applying the coats should stay fairly clear as you apply them. If the coats appear milky, that is an indicator that you are applying too thick. The coatings are water-based and cleanup is easy with soap and water. What type of energy savings will my customers see? A. The benefit of each application is dependent upon the factors of that environment. However customers typically report seeing energy savings between 20%-40% after using Nansulate to insulate their homes. Of course, those that insulate both their walls and either the ceiling, attic or roof will see the largest benefit since they are coating the complete thermal envelope. Industrial Nanotech, Inc. - 800-767-3998 - www.nansulate.com p. 16 of 20

Do the coatings have an R-Value? A. No. The R-value measurement cannot be used to accurately reflect thin film insulation. The formula for the R- value generally uses an inch in its calculation, which means that attempting to use it for any material less than an inch will give an inaccurate result. Nansulate is a new technology which insulates by means of low thermal conduction. By using a material with a very low thermal conduction, it is able to reduce heat transfer, which in turn reduces energy used to heat or cool. There are other test standards put in place to accurately reflect thermal abilities of thin film insulation materials. One of these is the UNI EN ISO 8990:1990, the Standard Test Method for Steady-State Thermal Performance of Building Assemblies. The test measures many variables including thermal flow in watts through sections of wall material. Nansulate coatings have been tested to this standard by an independent laboratory and were found to reduce thermal flow, measured in watts, through an 8cm cement wall section with plaster on both sides by 34.8%. You can find further information on our Thermal Test Data Page, and its real world performance can be seen by reading our case studies for Industrial, Residential, Green Building and Specialty applications. How do I order? Call 800-767-3998, email contact@nansulate.com, or buy online at www.nansulate.com. Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 17 of 20

Awards and Press BUILDERnews Magazine Best Product of 2008 in Energy Efficiency category Listed in the top 100 products of 2008 by Qualified Remodeler Magazine Top 100 Award for 2008 by Building Products Magazine Project at the Suvarnabhumi International Airport chosen by the Journal of Architectural Coatings as a Top Green Project Pick in 2009 Official ALLY Organization with the U.S. Department of Energy Save Energy Now Program A sample of some places you may have read about Nansulate coatings. Industrial Nanotech, Inc. - 800-767-3998 - www.nansulate.com p. 18 of 20

Test Data Thermal Testing Data Results from Standard Test Method for Steady-State Thermal Performance of Building Assemblies - UNI EN ISO 8990:1999: Thermal flow, measured in watts, through the wall section coated with Nansulate was reduced by 34.80% Thermal resistance (1/U), measured in m2*k*w1, Description: Two wall samples are tested according to test standards for a variety of thermal measurements including thermal flow, thermal conductance and thermal resistance. Testing was done by the accredited laboratory Istituto di Richerche E Collaudi - a certifying body for the Italian Government. Mold Testing Data Results from ASTM D 5590 & ASTM G21 Zero to minimal mold growth Photo shows the uncoated wooden control. Uncoated control is covered with mold growth. Photo shows a Nansulate coated wooden sample. The sample coated with Nansulate shows zero mold growth. EMSL Analytical, Inc., one of the nation's leading testing laboratories, compared mold growth on wooden surfaces coated with Nansulate products to surfaces with no coating. All were exposed to spore-producing bacteria, including Pencillium funiculosum, Aspergillus niger, Aureobasidium pullulans, Chaetomium globosum, and Trichoderma virens. After four weeks, the Nansulate coatings exhibited zero or minimal mold growths, whereas the uncoated surfaces showed extreme to 100 percent mold coverage. The testing was conducted by EMSL Analytical, Inc., an AIHA accredited laboratory. Nansulate Coatings have undergone toxicology testing and have been found safe for use in homes, schools, food processing and other sensitive environments. Some nanotechnology products have come under scrutiny due to potential health issues posed by the use of nano-sized materials particles smaller than one billionth of a meter. However, that is where Industrial Nanotech s particle design approach differs. Instead of nano-sized particles, Nansulate is made with larger micro-sized materials which use nanoscale internal architecture and surface chemistry to allow Nansulate to have properties that are unique. Nansulate products have received NSF International registration for use in food related environments (safe for incidental contact with food) and certification as a safe product from Industrial Health and Safety Consultants, Inc. Industrial Nanotech, Inc. - Painting Contractor Program Package - 800-767-3998 - p. 19 of 20 Heath & Safety Testing Data

Customer Quotes This allowed me to maintain maximum ventilation for the roof with an easier application and also maximizing the beauty of the birch wood grain. Having added a good amount of cubic space to the house, I am incredibly impressed with the insulation effects I witnessed. -Roy K. Homeowner & Artist, New York We at Cornwell Quality Tools have been very pleased with the results of using the Nansulate material. I believe that a considerable savings has been realized. The cost of the (Nansulate) materials was probably saved in the first cold month." -Daniel Goodell Senior Tool Designer Cornwell Quality Tools, Mogadore, OH The difference in the performance of our system was substantial, with the Nansulate insulated system providing slightly less than double the original performance. Thank you for your valued assistance and introduction to Nansulate. It is truly a remarkable product." I feel as though I found the "holy grail." I have been applying HomeProtect Clear Coat to my finished attic, wood exterior doors, and a couple of old skylights and windows. The last three months (May, June, July), I have used 40%, 40%, and 50% of the electricity I used last year during the same months. -Edward Moore,President Edward Moore Design, Inc., Canada -Dave Homeowner & Civil Engineer, Davenport, Iowa I would like to offer a few words of praise for the Nansulate product. My girlfriend and I both live in a very old house in downtown Detroit, circa 1890 s, and the cost to heat our home is outrageous...we applied the Nansulate product in our upstairs unit...the product was easy to apply, and the results were almost instantaneous. The upstairs unit retained a more constant temperature and was consistently more comfortable without the need to pump more and more heat and money up there. I would highly recommend the Nansulate product line to anyone who is trying to make their home more comfortable and save money on their heating bills. "We are really pleased with the 40% savings in energy cost and the swiftness at which it (the house) cools off and heats up. I even coated the claw foot tub in it so the water stays hotter longer!...i tell my friends about it because it really works. You could heat that house with a votive candle and a blow dryer now that it has the nanotech coating on it." Marc Izzard Truth or Consequences NM Sincerely, Michael Field and Nicole Conaway Detroit,MI Visit Nansulate.com for more! Industrial Nanotech, Inc. - 800-767-3998 - www.nansulate.com p. 20 of 20