DataSMART 681, 696 and 698 56/64k and T1/FT1 Stand-alone s The FrameVision solution from ADC Kentrox unites a robust family of Frame Monitoring DSU/CSUs with comprehensive reporting tools for managing performance and controlling the cost of Frame Relay networks. Frame Monitoring DSU/CSUs With FrameVision from ADC Kentrox, service providers and enterprise customers can monitor the end-to-end performance of their Frame Relay network. DataSMART Frame Monitoring stand-alone DSU/CSUs support 56/64k or T1/FT1 Frame Relay services. When teamed with FrameVision Reporter software, network managers can verify Service Level Agreements (SLAs); isolate performance problems to the LAN, local loop, or Frame Relay network; determine appropriate bandwidth needs; and monitor network trends to aid in future capacity planning. DataSMART s maximize your network uptime with convenient management features, such as in-band access for simplified remote management. Each T1 DSU/CSU includes a front-panel LCD for easy local management. Embedded, standardsbased SNMP and an integrated Ethernet port ensure easy central management. Validate Frame Relay service level agreements Match bandwidth to application requirements Isolate poor performance to the LAN or WAN Reports available from FrameVision Reporter and enterprise network reporting packages Support a wide range of applications from 56/64k to T1/FT1 speeds Add/drop port available for voice and data traffic integration Standards-based, in-band management with SNMP DataSMART Installer and Alarms Utility software included at no charge 5-year manufacturer s warranty ensures reliability
DataSMART 56/64k and T1/FT1 Stand-alone s Complete frame monitoring solutions The FrameVision solution from ADC Kentrox includes a family of network access devices and reporting tools. DataSMART s support either 56/64k or T1 Frame Relay services, and are available in standalone or plug-in shelf models. E1 models are also available to support international operations. All models include a variety of helpful configuration and diagnostic tools to simplify installation, troubleshooting, and circuit performance monitoring. FrameVision Reporter software graphically displays key statistics on the Frame Relay network. The management data provided by DataSMART Frame Monitoring DSU/CSUs is also compatible with popular enterprise reporting systems, including Concord s Network Health. Frame Relay monitoring DataSMART s provide unique and powerful tools for analyzing Frame Relay performance end-to-end and separately in the enterprise and local loop. By providing a complete picture across the Frame Relay network, carriers and enterprise network managers have the information necessary to determine network availability, performance, problem sources, and bandwidth requirements. DataSMART s monitor performance at three levels: the local loop, end-to-end frame service and enterprise traffic. With in-band management and local Ethernet connectivity, DataSMART Frame Monitoring DSU/CSUs can be managed easily from a remote or local site. DataSMART Add/Drop DSU/CSUs integrate PBX traffic onto a single T1/FT1 line. By operating at the network access point, DataSMART Frame Monitoring DSU/CSUs offer independent and objective visibility of the network to help identify the true source of performance problems and the best resolution. Comprehensive local-loop monitoring Poor line signal quality, framing violations, dropped packets, slow throughput, and other network errors can all be caused by problems in the local loop. DataSMART DSU/CSUs provide a variety of circuit performance monitoring tools to help determine the health of your wide area network. LMI spoofing The LMI spoofing feature auto-detects router or switch failure and maintains communication with your remote units. To help network managers troubleshoot problems quickly and minimize downtime, DataSMART T1 Frame Monitoring DSU/CSUs support LMI spoofing. Standards-based management The DataSMART embedded SNMP agent supports SETs, GETs and Traps, as well as standard MIBs, such as MIB II and the T1 MIB. And for comprehensive control, an enterprise MIB supports all available functions. These MIBs are available on the ADC Kentrox Web site. Advanced management and diagnostics DataSMART DSU/CSUs have advanced features that enable you to take active control of your network, such as in-band SNMP and an integrated Ethernet management port. Comprehensive T1 diagnostic tools help you identify and resolve performance issues in the Frame Relay local loop before they affect service. With the DataSMART, you can remotely configure your units and receive SNMP traps for important network events. Add/drop voice port option The DataSMART 698 Frame Monitoring DSU/CSU provides an add/drop voice port. Businesses can integrate their PBX and managed Frame Relay traffic onto a single T1/FT1 line, avoiding multiple access charges. Check with your carrier about integrated T1 service options. Page 2
Flexible reporting options DataSMART s support an open architecture for reporting information. Network managers can easily integrate the FrameVision circuit management data into their existing reports, procedures, and activities for Frame Relay service management. ADC Kentrox also offers the economical FrameVision Reporter software. With its graphical interface, this easy-to-use application reports valuable information about the performance of your Frame Relay network. For more information on FrameVision reporting options, visit the ADC Kentrox Web site, www.kentrox.com. DataSMART Installer DataSMART Installer is an intuitive, point-and-click configuration and diagnostic utility that dramatically reduces the time to set up access to a Frame Relay circuit. Free with each DataSMART DSU/CSU, this Windows-based application communicates with ADC Kentrox DSU/CSUs over direct serial, in-band and modem dial-up connections. When installing multiple DataSMART DSU/CSUs, users can configure the first unit, and then download, store, and export the configuration to other DataSMART units for rapid deployment. When the circuit is up, DataSMART Installer provides valuable performance data and diagnostics with a simple point-and-click. Alarms Utility The Alarms Utility monitors the entire network for interface and device errors, posting them to the event log in the HP OpenView management system. Custom icons uniquely identify all DataSMART DSU/CSUs for easy recognition in the Network Node Manager topology map. This software is available free from the ADC Kentrox Web site, www.kentrox.com. With FrameVision Reporter, network managers can easily monitor the performance of their Frame Relay networks. DataSMART Installer makes setup and diagnostics fast and easy. With the Alarms Utility, DataSMART DSU/CSUs integrate easily into HP OpenView. Page 3
DataSMART Stand-alone Family PHYSICAL INTERFACE PROTOCOLS USER PORTS NETWORK NETWORK USER AND DATA DATA VOICE RATES DataSMART 681 56/64k V.35 Frame Relay or 1 0 56/64k Single-Port Transparent Mode DataSMART 696 T1 V.35 Frame Relay or 1 0 Nx56/64k, Single-Port FT1 Transparent 1.544 Mbps Mode DataSMART 698 T1 V.35 Frame Relay or 1 1 Nx56/64k, Single-Port FT1 T1/FT1 Transparent 1.544 Mbps Add/Drop Mode DataSMART 696 T1 DataSMART 698 T1 1 3 4 5 1 2 3 4 5 1 2 Back Panel & Cable Guide To Network 93010143 RJ48C Plug to RJ48C Plug (ships with unit) 930xx144 RJ48C Plug to RJ48C Plug, Crossover To Terminal Equipment 93010143 RJ48C Plug to RJ48C Plug 930xx144 RJ48C Plug to RJ48C Plug, Crossover 3 Control Terminal 95006022 DE9S to DE9P, 6 feet 93001211 DE9P to RJ48, Cisco 2500 SLIP Ctl. Port 4 To Data Equipment 950xx052 MRAC34P to MRAC34P 95010057 MRAC34P to MRAC34P (DCE to DCE), 10 feet 5 To 10Base-T LAN 95007077 RJ45 Plug to RJ45 Plug, Cat. 3 UTP, 7 ft. 95007078 RJ45 Plug to RJ45 Plug, Crossover, Cat. 3 UTP, 7 feet NOTE: xx denotes length of cable, contact factory for available lengths. P = Plug (male); S = Socket (female) Ordering Guide Description Model No. Stand-alone T1 DSUs DataSMART 696 T1 72696 DataSMART 698 T1 Add/Drop 72698 Mounting Accessories Mounting Tray, 1 Stand-alone unit 78031 Software FrameVision Reporter 70304 FrameVision Reporter Enterprise 70306 Page4
Specifications DataSMART Stand-alone T1 s Network Interface Line Rate T1 (1.544 Mbps) Framing SF, ESF, Ericsson Line Code AMI, B8ZS Input Signal DS-1 from 0 db to -27 db, typical Output Signal DS-1 with LBO 0, -7.5, -15 db (selectable) Protocol Frame Relay or transparent RJ48C socket Lightning Protection Withstands lightning surges defined per FCC Part 68, and recovers Terminal Interface (add/drop port, DataSMART 698) Line Rate T1 (1.544 Mbps) Framing SF, ESF, Ericsson Line Code AMI, B8ZS Input Signal DSX-1 to -10 db Output Signal DSX-1 with equalization RJ48C socket Data Port Interface Bit Rate Nx56 kbps or Nx64 kbps (N=1...24) Electrical V.35 compatible MRAC34 socket Management Control Ports DCE EIA-574 38.4 kbps maximum English menus Async ASCII or SLIP Ethernet Port 10Base-T RJ45 socket Transmit and receive LEDs SNMP Agent MIB II (RFC 1213) DS1 MIB (RFC 1406) Frame Relay MIB (RFC 1315) Enterprise MIB* TELNET server Responds to Ping Security filters (for IP source addresses) Up to 10 SNMP Trap hosts In-band From network or router Shared or dedicated VC Frame Relay LCD Front panel display of unit status Front panel configuration of unit Alarms Traps ASCII SNMP Traps via SLIP, Ethernet or in-band Transmitted out async control port Frame Relay Circuit Management Methodology Non-intrusive, in-band Virtual Circuit (VC) Utilization Frame and octet counts for data sent above CIR and above excess burst rates VC Availability Measurements Frame Relay Link Management (FRLM) activity FRLM configuration Router and switch status Spoofing status, events and seconds VC availability and status VC Delay Measurements Maximum observed delay, average delay, attempts made, delay threshold exceeded; automatic delay measurements for up to 64 active VCs VC Frames Delivered Report Frames dropped Tx/Rx, octets dropped Tx/Rx NI/Data Port Availability Measurements Seconds available, in test or in alarm state for network interface and data port NI/Data Port Statistics Frame count, octet count, invalid header address, excessively long frames, HDLC errors, IP management frame and octet counts VC Status Frames Tx/Rx, octets Tx/Rx, BECN set, FECN set, DE set Reports Frame VC utilization Frame VC round-trip delay Frame VC delivered data Frame VC availability Frame VC statistical Frame NI/Data Port statistical Local Loop Diagnostics Loop Tests Line loopback Payload loopback Data port loopback Line Test Codes QRS, 3-in-24, 1-in-8, All 1s, All 0s Data Test Codes 511, 2047 BERT Tester Independent BERT on all test codes Local Loop Performance Monitoring Methodology T1.403 in-band performance monitoring Data Storage Last 24 hours of data in 15 minute increments; last 7 days of data in 24-hour increments Monitors Network interface Registers Separate for carrier and user Reports Based on G.821 for performance Far end Alarm history Network interface statistical Diagnostics LEDs Power/fail T1 Data port transmit Data port receive Data port CTS Data port RTS Loop Tests Local loopback Data terminal loopback Compatibility AT&T TR 62411-1990 TR 54019A PUB 43802 ANSI T1.403-1995 Bellcore TR.194 Regulatory FCC Compliance Part 68; Part 15, Class A NRTL Listed UL 1950, 3rd Edition CSA 22.2; No. 950 IC CS-03 Environment Operating 0 to 50 C 5% to 90% RH, non-condensing Storage -20 to 66 C 5% to 95% RH Power AC 115 VAC, 60 Hz, 8W Physical Usage Desktop or tray mount Dimensions 7.75" W x 1.65" H x 11.5" D Weight 2.5 lbs (approx.) *MIB files available at www.kentrox.com. Page 5
DataSMART 56/64k and T1/FT1 Stand-alone s DataSMART 681 56/64k 1 2 3 1 2 3 Back Panel & Cable Guide To Network 930xx153 RJ48S Plug to RJ48S Plug To Control Terminal 93014241 EIA-561 Flat Modular Cable, Plug to Plug, 14 feet 78892 RJ45 to DB25P Jack Adapter 78899 RJ45 to DE9S Jack Adapter To Data Equipment 95010052 MRAC34P to MRAC34P 950xx057 MRAC34P to MRAC34P (DCE to DCE) NOTE: xx denotes length of cable, contact factory for available lengths. P = Plug (male); S = Socket (female). Specifications DataSMART Stand-alone 56/64k Network Interface Line DDS or 64k clear channel Receiver Sensitivity -40dBm RJ48S socket Data Port Interface Line Rate 56 kbps or 64 kbps Electrical V.35 compatible MRAC34 socket Management Control Ports DCE, EIA-561, 9600 bps English menus Async ASCII or SLIP SNMP Agent MIB II (RFC 1213) Frame Relay MIB (RFC 1315) Enterprise MIB* TELNET server Responds to Ping Security filters for IP source addresses Up to 10 SNMP Trap hosts In-band From network or router Shared or dedicated VC Frame Relay Alarms Traps SNMP Traps via SLIP or in-band Frame Relay Circuit Management Methodology Non-intrusive, in-band Virtual Circuit (VC) Statistics Frame count per VC, Dropped Frame count, Octet count per VC, DE/FECN/BECN bit count per VC VC Utilization CIR/EIR exceeded count per VC Octet count during CIR/EIR VC Delay Measurements Maximum observed delay, average delay, attempts made, measurement packets lost Automatic delay measurements for up to 8 active VCs VC Delay Diagnostics Round-trip VC delay via in-band Frame Relay Performance Thresholds User configurable Access bandwidth utilization Round-trip delay Reports Frame VC statistics Port statistics Frame VC delay Frame VC utilization Burst: data sent above CIR and above Excess Burst rates Diagnostics LEDs Power, Status, Test, Network, Data port Loop Tests CSU loopback, DSU loopback, Data terminal loopback Compatibility ANSI T1.410-1992 Regulatory FCC Compliance Part 68; Part 15, Class A NRTL Listed UL 1950, 3rd Edition CSA 22.2; No. 950 IC CS-03 Environment Operating 0 to 50 C 5% to 90% RH, non-condensing Storage -20 to 66 C 5% to 95% RH Power AC 115 VAC, 60 Hz, 7W Physical Usage Desktop or tray mount Dimensions 7.75" W x 1.65" H x 11.5" D Weight 2.5 lbs (approx.) *MIB files available at www.kentrox.com. Ordering Guide Description Model No. Stand-alone 56/64k Model DataSMART 681 56/64k 72681 Mounting Accessories Mounting Tray, 1 Stand-alone unit 78031 Software FrameVision Reporter 70304 FrameVision Reporter Enterprise 70306 FrameVision Reports Pack 70350 for Concord Network Health Worldwide Sales Offices Corporate Headquarters +1-503-643-1681 Australia +61-2-9975-1499 Belgium +32-2-712-6555 Canada +1-905-629-3104 China +86-10-65007001 Germany +49-211-53065530 Korea +82-2-333-8989 Singapore +65-227-5621 United Kingdom +44-1705-481691 ADC Kentrox 14375 NW Science Park Drive Portland, Oregon 97229 (800) 733-5511 (503) 643-1681 FAX (503) 641-3341 Web Site www.kentrox.com E-mail info@kentrox.com Pre-sales Support (800) 733-5511 Literature Hotline (800) 733-5511 Copyright 1999, ADC Kentrox. An Equal Opportunity Employer. DataSMART is a registered trademark and FrameVision is a trademark of Kentrox Industries, Inc., dba ADC Kentrox. ADC Kentrox is a registered trademark of ADC Telecommunications, Inc. These trademarks are registered in the U.S. Patent and Trademark Office and may be registered in other countries. All other trademarks mentioned are the property of their respective companies. Specifications published here are current or planned as of the date of publication. ADC Kentrox reserves the right to change specifications without prior notice. You may verify product specifications at www.kentrox.com. 4/99 05-05-002-1