Real Time Monitoring Mirador Mirador is a web based application for 24/7, real-time monitoring. This platform is available as a custom configuration to fit multiple applications of environmental monitoring during the various stages of production, storage and transportation. This fully secure system complies with regulatory requirements of the life science, healthcare and food industries. The Mirador system aids in achieving quality assurance goals as it pertains to environmental conditions. Features include: 24/7 monitoring of temperature, humidity, differential pressure and/or carbondioxide Secure access to data via the internet or intranet Complies with FDA code 21 CFR part 11 Excursion notifications via text, email or pager Automatic software updates Multi-site configurable 9 Point NIST traceable calibration Versatile 4 alarm thresholds Automatic recalibration reminders No Downtime Recalibration Exchange Program Factory installed or self-installation using Mirador Express Applications: Labs and Freezers: Simplify data retrieval Food Processing: Ensure HAACP protocols Transportation: Record data world wide Cold Storage Facilities: Protect the integrity of your product
Real Time Monitoring xtag2 Sensor features include: Internal/External Sensors: The xtag2 can be directly installed inside the area to be monitored (in applications above 0C). For applications below 0C, an external sensor probe is used. The xtag2 is capable of up to 4 probes. Wireless/Wired temperature and humidity sensor Screen + LED for local equipment Up to 5 external sensors Alarm notifications Internal memory Rechargeable battery Very high RF range Up to 300mW@2.4Ghz xtag2 Wireless Sensor Specifications: TEMPERATURE TEMPERATURE & HUMIDITY Range of Temperature (Accuracy/Resolution) Range of Humidity (Accuracy/Resolution) -40 C/+85 C (-40 F/+185 F), ±0.5 C, ±0.0625 C n/a -40 C/+85 C (-40 F/+185 F), ±0.5 C, ±0.0625 C 0-100%, ±0.5 C, ±0.0625 C Display Reflective 5 digit LCD Reflective 5 digit LCD Interfaces USB, Ext. Power USB, Ext. Power External wired sensors RJ12 + 6 pins connector RJ12 + 6 pins connector Battery 1.85A/H, Li-ion Polymer 1.85A/H, Li-ion Polymer Internal Memory 2Mb 2Mb Radio IEEE802.15.4, 2,4GHz, 16 channels, 1 to IEEE802.15.4, 2,4GHz, 16 channels, 1 to 300mW 300mW Battery life Up to 2 years before rechargeable Up to 2 years before rechargeable Dimensions (not including antenna) 3.5" x 2.25" x 1" 88.5mm x 57.15mm x 25.4mm 3.5" x 2.25" x 1" 88.5mm x 57.15mm x 25.4mm
Real Time Monitoring xtag Display Reader features include: Wireless / wired temperature and humidity sensor Dot matrix LCD + Led Up to 8 external sensors Alarm notifications Rechargeable battery Very high RF range Up to 300mW @ 2.4GHz xtag2 Wireless Reader Specifications: Range of Temperature (Accuracy/Resolution) Range of Humidity (Accuracy/Resolution) Display Interfaces External wired sensors Battery Internal Memory Radio TEMPERATURE -40 C/+85 C, ±0.5 C, ±0.0625 C 0-100%, ±0.5 C, ±0.0625 C Transmissive dot matrix LCD (128x64) USB, Ext. Power RJ12 + 6 pins connector 1.85A/H, Li-ion Polymer 32Mb internal + USD card holder IEEE802.15.4, 2,4GHz, 16 channels, 1 to 300mW Battery life Up to 8 hours Dimensions 5 x 3 x 1.25 127mm x 76.2mm x 31.75mm Mirador Express Self Installation Kit: For smaller applications such as freezers or refrigerators, Mirador is available as an off -the-shelf kit. This kit includes all the features and benefits of the full system and is easy to install. Mirador Express is available in 1, 2, 3 or 4 sensor kits. Use this QR code for a brief overview video of MiradorExpress
How It Works In a standard wireless mode, each xtag2 sends up to 300mW every 3 minutes, during 10 mill-second. This allows us to avoid any interference with all your other equipment or devices. We can provide sensors able to operate between -328ºF to +932ºC, and manage several parameters such as temperature, humidity, differential pressure, CO2 etc. Our sensors could be embedded or with an external probe, running on their internal batteries or powered on an electric outlet. For fixed storage areas, each sensor collect data and transmit to a reader (xtagdisplay). The reader is connected to the dedicated server where Mirador has been centrally installed or remotely hosted. Our system uses a Zigbee protocol, which is a specification for a suite of high level communication protocols using small, low power digital radios. Protocol Zigbee Bluetooth Wi-Fi IEEE 802.15.4 802.1.5.1 802.11a/b/g/n/ndraft Memory requirement 4-32ko 250 ko+ 1 Mo+ Battery life Years Months Hours Transfer speed 250kb/s 1Mb/s 20Mb/s Range (outdoor) 1000-1500m (0.6-1mi) 50m (164ft) Nods 65000+ 7 32 300m (984ft) Reporting and alarm capabilities Mirador is web (MySQL data base) and a multi-site application; all recorded data are stored on the same data base or local ones, where compliant graphs and reports could be easily edited. Reports available are text report, graph and interactive graph, pdf or.csv export to Excel or Lotus for example.
Software The Mirador Main Interface is a representation of your installation with sensor locations and realtime readings received from sensors. It displays the list of recent alarms triggered by the system as well as the alarms status messages (acknowledge information and comments). It is also used to access other screens depending on user privileges. An audit trails interface is used to display audit trail recorded by the Mirador system.
Software Sensor Readings Screen is used for generating reports or graphics based on sensors readings (temperature, humidity, pressure etc.) stored in database. Example report as a graph in.csv format Example report in.txt format Example Report in.pdf format
System Validation Site Acceptance Testing (SAT) A SAT can be done once the installation is completed. Site Acceptance Testing is the stage where the manufacturer/customer conduct testing for the components supplied under the project scope and tests the conformance of the delivered solution. The Site Acceptance Testing stage includes 3 parts: integration testing, performance testing, and user acceptance testing. System Validation Upon customer s request, the Mirador solution can be validated (Installation, Operation and Performance qualification) with a protocol, as required by the regulations. May this be the case, the protocol will be written and approved by Cryopak Verification Technologies Inc. and the customer. The execution can be done by CVT or the customer. Once this is completed, a final report will be written. The system validation is a regulatory work that is done once; if any system s modifications occur after the validation (adding a user, expansion, etc.), a change control document will be inserted into the initial protocol. This change control will describe the modification and validate this new addition to the system.
Your One-Stop Shop on the Path to Compliance Ask Us How We Can Help sales@cryopak.com East and Ontario: 1.888.423.7251 West: 1.888.667.2532