Typical Power Pusher solutions Typical PowerTug solutions Solution 19: Moving Mobile homes in Manufacturing. Solution 116: Moving 'Coffins' in Film industry. Solution 08: Moving Rolling stock in Railway maintenance workshop Solution 105: Moving trolleys in Automotive manufacturing. Solution 14: Moving Paper reels & Cable drums. Solution 125: Moving catering trolleys in Prisons & Hospitals. Solution 87: Moving steerable Stillages in Automotive manufacturing. Solution 137: Moving 'A' frames in Leather industry.
IF IT ROLLS... WE CAN MOVE IT! Nu-Star Material Handling Ltd. Unit C, Ednaston Business Centre Ednaston Derbyshire DE6 3AE Pedestrian Operated Battery Powered Robust Steel Construction Smooth Variable Speed Control Rugged All Terrain Tyres Wide Range of Attachments Over 20,000 Units Sold to Date PUSH / PULL CAPACITY...from 500Kgs up to 40,000 Kgs POWER PUSHER
POWER PUSHER Benefits Features Accessories Significant Productivity gains - either through a reduction in man power required to move loads, and/or increased speed of moving loads. Assists with compliance of Health & Safety guidelines which limit the manual pushing / pulling performed by one person. Fingertip control and compact size make the unit easy to manoeuvre. Transaxle design allows the unit to operate on uneven surfaces, indoors or outdoors. Motor type... 24 Volt D.C. Electrically powered with on-board charger, safety horn and hand guards. Fully programmable control system enabling speed and acceleration / deceleration characteristics to be set according to load and environment. Automatic braking and emergency reverse. Pneumatic tyres and free wheel hubs. TECHNICAL SPECIFICATION Drive mechanism...2 x Chain & Sprocket Gearbox...Single speed reduction gearbox, with differential Controller...Fully programmable, with diagnostic facility Foam filled tyres for heavy duty applications. Snow chains, nonmarking rubber tyres, solid polyurethane. wheels. Safety pack (strobe and motion bleeper) for factory environments. External battery jump start kit. Wide range of standard and bespoke attachments enabling connection to your load Batteries... 2 x 60 Amp/Hour Dryfit, Gel type. Sealed & Maintenance Free Battery charger... On-Board, 3 stage, 2 x 10 Amp circuits Push/Pull Capacity...Up to 40,000Kgs (Subject to rolling resistance of load) Nu-Star Material Handling Ltd A member of the NuStar Inc. Group of Companies
IF IT ROLLS... WE CAN MOVE IT! Pedestrian Operated Battery Powered Robust Steel Construction Smooth Variable Speed Control Mono Drive Wheel Electric Lift/Lower Attachment Complete control of 4 swivel castor loads PUSH / PULL CAPACITY...from 100Kgs up to 2,000 Kgs Nu-Star Material Handling Ltd. Unit C, Ednaston Business Centre Ednaston Derbyshire DE6 3AE POWER TUG
POWER TUG Benefits Features Accessories Significant Productivity gains - either through a reduction in man power required to move loads, and/or increased speed of moving loads. Assists with compliance of Health & Safety guidelines which limit the manual pushing / pulling performed by one person. Electrically powered with on-board charger (110V or 240V) safety horn and hand guards. Fully programmable control system enabling speed and acceleration / deceleration characteristics to be set according to load and environment. 97dB Audible motion bleeper. Safety strobe. Fingertip control and compact size make the unit easy to manoeuvre. Mono-drive wheel (with stabilising castors) allows the unit to operate on uneven surfaces, indoors or outdoors. Automatic braking and emergency reverse. Polyurethane drive wheel outer with alternative tread patterns and material specifications. External electrical take-off for complimentary devices e.g. Lift Tables. Wide range of standard and bespoke attachments enabling connection to your load. TECHNICAL SPECIFICATION Motor type... Drive mechanism... Controller... Batteries... Battery charger... Push / Pull Capacity... 24 volt D.C. 600W Planetary Gearbox, 18:1 reduction, through mono-drive wheel Fully programmable digital, with diagnostic facility Four quadrant, full bridge power output stage 2 x 60 Amp/hour Dryfit, Gel type Sealed & Maintenance Free On-Board, 3 stage 2 x 10 Amp circuits (110v or 240v input) Up to 2,000Kgs (Subject to rolling resistance of load) 471 1208 1465 503 750 Nu-Star Material Handling Ltd A member of the NuStar Inc. Group of Companies
Typical Super Power Pusher solutions Solution 214: Moving Industrial Cable drums in Manufacturing. Solution 209: Moving Kiln Cars in Quarrying. Solution 237: Shunting Rail freight wagons. Solution 238: Shunting Rail freight wagons.
IF IT ROLLS... WE CAN MOVE IT! Nu-Star Material Handling Ltd Unit C, Ednaston Business Centre Ednaston, Derbyshire DE6 3AE England