ACCESS. Scaffold Towers Platforms Ladders Steps Trestles Staging Fall Protection

Transcription

1 Scaffold Towers Platforms Ladders Steps Trestles Staging Fall Protection

2 3T METHOD Brandon Hire's double width and single width, ladder frame scaffold towers are quick and simple to erect. ALLOY SCAFFOLD TOWER ADVANCED GUARD RAIL Brandon Hire's Advanced Guardrail Tower scaffold is the latest breakthrough in improving safe tower assembly and uses fewer components than 'standard' 3T tower systems. The specially designed guardrail sections mean quicker, easier assembly, while providing collective fall protection during the erection of a tower. AGR FRAME AGR uses a frame as opposed to individual braces HEIGHT (HANDRAIL) 7 DAYS INFO UP TO 3.7M S/W & D/W UP TO 6.9M S/W & D/W UP TO 7.9M S/W & D/W UP TO 9.7M S/W & D/W UP TO 11.9M D/W ONLY UP TO 13.9M D/W ONLY BRACE CARRIER A simple solution to carry awkward braces for the majority of scaffold systems. Carries 10 braces at a time 240X 9.60 BRACE CARRIER (OPTIONAL) ACCESSORY HEIGHT (HANDRAIL) 7 DAYS INFO UP TO 3.7M S/W & D/W UP TO 6.9M S/W & D/W UP TO 7.9M S/W & D/W UP TO 9.7M S/W & D/W UP TO 11.9M D/W ONLY UP TO 13.9M D/W ONLY 8 Find your nearest Branch:

3 FIBREGLASS SCAFFOLD TOWER (GRP) This non-conductive scaffold system, with its inbuilt ladder frames, is ideal for use in areas where conventional aluminium scaffold would be inappropriate.this scaffold system can be used in Zone 1 environments, areas defined as places in which an explosive atmosphere is likely to occur, where there may be chemical hazard or electrical risk. It can also be used where hygiene is important, such as the food industry. Height refers to hand rail Complies with 3T method of construction Available in widths 1.85 or 0.85m ACCESS. APPLICATIONS Oil refineries Aviation Power stations Electrical engineering Paint shops Chemical plants Food manufacture Pharmaceuticals Rail industry Dockyards and ports Clean environments Utilities Gas industry 7 DAYS INFO M M M M M M M M M M RAIL LINK TROLLEY The tower carrier converts two rail link trolleys into a mobile base for a GRP scaffold tower. Full fail-safe braking and rail hooks are fitted as standard. 220H RAIL LINK TROLLEY 07AE TOWER CARRIER (PER PAIR) STAIRWELL ACCESS SCAFFOLD Easy access from both sides of the stairwell unit to the platform is provided by a walk through ladder frame. Simply walk through the frame and climb up the ladder. Platform levels from 1.5 to 2.7m high, at 0.3m intervals. This frame design solves the access problems experienced on narrow and domestic and industrial staircases. Features 4 adjustable base plates designed for a fixed unit and can be adjusted if not on level ground Integrated access frame so access on the staircase can still be obtained 07BN STAIR TOWER 07BP EXTENSION SET or visit our website at 9

4 BRIDGING TOWER The innovative aluminium bridging system provides effortless up-and-over access. Ideal for use in offices and manufacturing environments. 5 Castors for easy mobility Multi adjustable legs for use on an uneven surface Plywood platform with a non-slip mesh finish 5 Rung Ladder for easy access to the platform Guardrail that is incorporated into the existing frame so no need for any extra components Height: 1.5m Width: 2.5m 07K BRIDGING TOWER FOLDING TOWER For areas where height and space are limited, gain fast, easy access with the folding tower. Ideal for one man use, lightweight and easily portable, the unit passes easily through standard doorways. Fitted with lockable castors and non-slip platform boards. Folds flat to fit in a small van, or on a roof rack. Provides a working platform 0.7m wide and 2m long and a platform height of 0.8 to 1.7m when using guard rail set FOLDING SCAFFOLD GUARD RAIL EXTENDING SET Regular inspections are carried out on temporary or fixed structures to ensure safety. The Tower Tag displays up-to-date information on the movement of each tower scaffold and its maximum safe working load. These can be purchased in all Brandon Hire branches. ITEM REF: Find your nearest Branch:

5 RAZOR DECK ACCESS PLATFORM Compact stable work platform providing 0.55m, 1m and 2m platform height. One piece construction. Lightweight Fits through standard doorways Dimensions: 0.7 x 1m Weight: 63kg SWL: 125kg PODIUM STEPS The anti-surf podium has been designed to provide a safer way of working at low levels and offers four platform levels of: 250mm, 500mm, 750mm and 1m ACCESS. 07FS MANUAL 07BQ PODIUM- ANTI-SURF 07BT PODIUM EXTENSION 08PR TOOL TRAY or visit our website at 11

6 FIBREGLASS PODIUM A non-conductive, mini folding access platform offering a safer way of working at low levels. Ideally suited to electrical installations and Zone 1 applications. Platform height: 1.045m SWL: 150kg Weight: 38.2kg FLATPAK PODIUM A lightweight, yet robust, low level work platform that is easy to handle. Simple to assemble and safe to use by just one operative. Platform height: 650/950m SWL: 150kg Weight: 25kg 07GB FIBREGLASS 08PR TOOL TRAY 07PF FLATPAK 07PG STABILISER 08PR TOOL TRAY 12 Find your nearest Branch:

7 STEP UPS Sturdy step ups that will give you confidence to reach up high to ceilings. ADJUSTABLE SHERPASCOPIC STEPS Height adjustable and fully enclosed, to prevent toppling from front, rear and sides. Height adjustable rung by rung Folds down to store and transport Weight: 30/36kgs ACCESS SIZE 1 30CM SIZE 2 52CM DELTADECK The Deltadeck 250 low level access unit assembles and dismantles in less than a minute, allowing easy transportation and storage. With five working heights to choose from, Deltadeck 250 low level access solution is ideal for those needing flexibility when working at heights of 3m and below. The Deltadeck 250 low level access unit is suitable for finishing contractors, general maintenance for everyday use and facilities management. 071A SIZE 2 52CM STEPS STEPS or visit our website at 13

8 EXTRA WIDE PLATFORM STEPS An industrial ladder with wider steps allowing safer maintenance at height. WAREHOUSE STEPS Strong, light and manoeuvrable, with large working platform and twin hand rails. 08AA TREAD 08AB TREAD 08AC TREAD COMBINATION LADDER A versatile piece of access equipment that can be used in a variety of ways to solve many access problems. It can be used as: Free standing ladder A double or triple extending ladder A single section ladder 330A GLASSFIBRE STEPS 3 TREAD 330B GLASSFIBRE STEPS 4 TREAD 330C GLASSFIBRE STEPS 5 TREAD 330D GLASSFIBRE STEPS 6 TREAD 330F GLASSFIBRE STEPS 7 TREAD 33A ALLOY 3 TREAD 33A ALLOY 4 TREAD 33A ALLOY 5 TREAD 33A ALLOY 6 TREAD SIZE M SIZE M SIZE 3-6.9M SIZE M SIZE M 14 Find your nearest Branch:

9 ALLOY STEP LADDER Our wide range of step ladders are designed for general trade or industrial use. Non-slip treads and rubber feet, combined with locking cross-bars, create a stable platform for inspection and maintenance work. Certified to BS EN 131. FIBREGLASS STEP This range of non-conductive steps are ideal to use where electrical hazards exist. Non-slip treads and rubber feet are added safety features. A lightweight, easy to carry step ladder. Certified to BS EN 131. ACCESS TREAD TREAD TREAD TREAD TREAD TREAD TREAD TREAD TREAD SWINGBACK AND PLATFORM STEP LADDERS TREADS CLOSED HEIGHT OPEN HEIGHT SAFE STANDING HEIGHT SWINGBACK PLATFORM SWINGBACK PLATFORM SWINGBACK PLATFORM SWINGBACK PLATFORM 5 5 INCLUDING PLATFORM 1.14M 1.80M 1.03M 1.68M M 6 6 INCLUDING PLATFORM 1.38M 2.00M 1.26M 1.91M M 7 7 INCLUDING PLATFORM 1.62M 2.27M 1.48M 2.13M M 8 8 INCLUDING PLATFORM 1.86M 2.50M 1.70M 2.31M M INCLUDING PLATFORM 2.34M 3.00M 2.17M 2.74M M INCLUDING PLATFORM 2.82M 3.47M 2.57M 3.20M M or visit our website at 15

10 HEAVY DUTY WW Our range of aluminium ladders includes two and three section push-up ladders and rope operated ladders with wall running wheels. Certified to BS EN 131. FIBREGLASS LADDERS Our range of fibreglass ladders have been designed specifically for professionals who require strong yet lightweight extension ladders that are non-conductive. The ladders provide insulation to over 25,000v and are certified to BS EN 131. CLOSED OPEN DOUBLE 2.43M 4.2M DOUBLE 2.93M 5.2M DOUBLE 3.43M 6.2M DOUBLE 3.94M 7.91M DOUBLE 4.44M 8.21M DOUBLE 4.94M 8.96M DOUBLE 5.44M 9.96M DOUBLE 5.94M 10.71M TRIPLE 2.43M 5.96M TRIPLE 2.93M 7.46M TRIPLE 3.43M 8.96M TRIPLE 3.94M 10.47M TRIPLE 4.44M 11.97M TRIPLE 4.94M 12.97M TRIPLE 5.44M 13.97M TRIPLE 5.94M 15.47M ROOF LADDERS The safe answer to access on sloping roofs. Available in fixed lengths or as an extending roof ladder for greater reach ROOF LADDER DOUBLE EXTENDING DOUBLE M DOUBLE M TRIPLE M 16 Find your nearest Branch:

11 POLE LADDERS The pole ladder is ideal for use with scaffolding and tower. Available in sizes from 4 8m. LADDER ACCESSORIES LADDER SAFETY FOOT A simple and effective way to improve ladder safety, this aluminium T section ladder stop is bonded into vulcanised rubber and is preferred by the HSE to manual ladder footing. The safety foot helps prevent the ladder from slipping downwards or flipping sideways. Suitable for use in many conditions including on tarmac, concrete, wet grass and other slippery surfaces. ACCESS LADDER FOOT SURVEYORS LADDER This sturdy sectional aluminium ladder is made from lightweight alloy and has the huge advantage of packing into the boot of a car. LADDER ANTI-CLIMB DEVICE LadderSafe is a safety system designed to prohibit unauthorised access to scaffold and other structures. This simple but effective device restricts the normal use of a ladder by covering the rungs with a locking plate. Universal fitting Padlock required TELESCOPIC LADDER 33A TELESCOPIC LADDER LADDER SAFE or visit our website at 17

12 SITE STAIRWAY Portable Temporary Stairway Especially suitable for building/construction sites and on slopes/ embankments. Stairway sections easily joined together Stairway fitted with handrails and locking mechanism Longer stairways supported with combibeam Maximum 2 person may use stairway at same time Collapsible sections for easy transportation Minimum hire period applies STEEL TRESTLE AND SCAFFOLD BOARDS These adjustable steel trestles will support two 450mm stagings or four scaffold boards, to provide a stable platform for a wide range of building work. Traditional wood scaffold boards are available in 10' and 13' lengths A single step platform to reduce working heights PRICE ON APPLICATION To hire this product please call CODE COMBI SAFE SITE STAIRWAY LK47 LK48 LK49 LK50 LK51 LK52 LK53 LK63 LK64 INFO STAIRWAY 3 STEP STAIRWAY 6 STEP STAIRWAY 9 STEP STAIRWAY 12 STEP STAIRWAY UNIVERSAL SUPPORT STAIRWAY SLAB ATTACHMENT STAIRWAY SCAFFOLD ATTACHMENT COMBIBEAM SECTION Y12 COMBIBEAM SECTION Y SIZE M TRESTLES SIZE M TRESTLES SIZE M TRESTLES SCAFFOLD BOARD 18 Find your nearest Branch:

13 STAGING BOARDS Staging boards provide the ideal solution to spanning between tower scaffolds and trestles. Able to support up to 3 people over a distance of up to 7.2m. We advise a hand rail system should be used at all times. A hand rail system may be required at any height if required by risk assessment Hand rails are charged as extras STAGING HAND RAIL SYSTEM When used in conjunction with 450 and 600mm staging boards (see page 44) the handrail and post provides a safe system of work, essential when working at heights. Each set creates a handrail on one side only ACCESS MM X 3.05M MM X 3.66M MM X 4.27M MM X 4.88M MM X 5.49M MM X 6.10M MM X 6.60M MM X 7.30M MM X 3.05M MM X 3.66M MM X 4.27M MM X 4.88M MM X 5.49M MM X 6.10M MM X 6.60M MM X 7.30M MOBILE VALLEY FRAME The Roof Valley Walker consists of a mobile safety cage for one or two persons specifically designed for light maintenance of valley-gutters such as inspection, cleaning, or re-sealing. Lightweight aluminium construction Foldable Adjustable for most roof angles Cushioned outriggers with safety mesh 080V ROOF VALLEY WALKER SH M SET SH M SET SH M SET SH M SET SH M SET TRESTLE GUARD RAIL SYSTEM This system can be easily tailored to suit all trestle and board layouts. Trestles and boards extra 07G POST 07G PANEL 07G LADDER BRACKET or visit our website at 19

14 PUSH ALONG POWERED ACCESS PLATFORM 2.5M Ideal to use where space is restricted, these push along powered access platforms eliminate the need for climbing large platform steps, podiums or erecting scaffold towers. Simply push into position providing the operator with simple, effortless access. Max platform 2.5m Working height 4.5m Low platform entry height only 360mm Passes easily through single doorways Large 1000mm x 730mm platform size Heavy duty Auto-Lock casters provide A secure base Heavy duty Ultra-Glide low friction lifting mast provides excellent platform rigidity PUSH ALONG POWERED ACCESS PLATFORM 3.1M These push along powered access platforms eliminate the need for climbing large platform steps, podiums or erecting scaffold towers. Simply push into position providing the operator with simple, effortless access. Max platform 3.1m Working height 5.1m Compact, only 0.78m wide, passes easily through standard doorways Large 1.5m x 0.65m platform size Only 0.78m x 1,5m working footprint Heavy duty Auto Lok castors provide a secure base 08PN MAX PLATFORM 2.5M WORKING HEIGHT 4.5M 08PT MAX PLATFORM 3.1M WORKING HEIGHT 5.1M 20 Find your nearest Branch:

15 PECO LIFT The Pecolift is a step change in low-level access It's so easy, fast and efficient to use, it's intuitive! Just step in and turn the handle! It's battery free - so no charging or acid spills and its mains power free. Step into the platform, no climbing. Intuitive to operate - turn handle to elevate. No power required. 'Auto-lok' brake on elevation. Lightweight, easy to manoeuvre. Small footprint (985mm x 700mm). Unlimited lift cycles, can be used 24/7. Robust design for years of trouble free service. Minimal operational costs, virtually maintenance free. SELF PROPELLED ACCESS PLATFORM Self propelled powered access platform eliminates the need for climbing large platform steps, podiums or erective scaffold towers. Step into the platform, drive when elevated. Simple, safe and efficient. Fully self propelled, even when Fully elevated Rated for indoor and outdoor use Only 478kg weight, able to work on raised access flooring (Kingspan approved) Ulta compact, only 750mm x 1200mm footprint Large 1500mm x 700mm platform size (Cantilever extended) 500mm cantilever deck for outreach over obstructions ACCESS. 08PV POA MAX WORKING HEIGHT 3.5M 08PP SELF PROPELLED ACCESS PLATFORM or visit our website at 21

16 POWERED ACCESS TRAILER ACCESS PLATFORM A range of towable booms with telescopic axles allowing access through double doors. An ideal alternative to ladders and scaffolding. Features: Working height: 12.33m Outreach: 5m Travel width: 1.50m Working width: 2.70m Capacity: 200kg Slew: 360 Weight: 1,160kg Fully road towable PERSONNEL SCISSOR LIFT This highly flexible scissor lift has a working height of 7.8m, a carrying capacity of 227kg and ergonomic joystick to allow operation from either ground level or from the platform. With low noise levels and non-marking tyres these machines are ideal for sensitive environments. Features: Slip resistant deck Telescopic end rail to accommodate large loads Built-in lanyard attachments Tilt-level sensor with audible alarm 1m platform extension 0866 POA BATTERY (110/240V CHARGED) 0868 POA BI-ENERGY (PETROL/BATTERY) 08BB POA TELESCOPIC (110/240V CHARGED) 0883 POA BATTERY FOR ADVICE OR TO PLACE AN ORDER, CALL SPECIALIST POWERED ACCESS ON OR ACCESS@BRANDONHIRE.CO.UK 22 Find your nearest Branch:

17 SCISSOR LIFT (GS19) Suitable for use on heating and ventilation, industrial maintenance, access in tight areas and other applications. Working height: 7.80m Platform height: 5.80m Platform size: 1.63 x 0.74m Platform size extended: 2.62 x 0.74m SWL-high: 2.27kg Power: electric Weight: 1,344kg Minimum hire period applies VEHICLE MOUNTED PLATFORM (T20C) Suitable for high level building maintenance, roof/gutter inspection work, industrial cleaning and many other applications. Electro hydraulic control system. Outreach: 9.50m Platform size: 1.40 x 0.70m SWL high: 200kg Power: diesel Rotation: continuous PRICE ON APPLICATION Closed height: 2.90m Closed width: 2.30m Closed length: 6.51m Weight: 3,500kg Minimum hire period applies ACCESS. PRICE ON APPLICATION BOOM LIFT (Z80) Used for plant and machinery installation and repair, large industrial facilities and other applications. Working height: 26.38m Platform height: 24.38m Outreach high SWL: 18.28m Platform size: 1.83 x 0.76m SWL high: 300kg Rotation: continuous Closed weight: 3.00m Closed width: 2.49m Closed length: 11.27m Weight: 17,010kg Reach below ground: -4.83m Minimum hire period applies PRICE ON APPLICATION or visit our website at 23

18 BOOM LIFT (Z45D) Suitable for use on building maintenance and repair, indoor and outdoor application, civil engineering projects and many other applications. Working height: 15.91m Platform height: 13.91m Outreach: 7.60m Platform size: 1.82 x 0.76m SWL high: 227kg Power: diesel Rotation: 355 Closed height: 2.11m Closed width: 2.29m Closed length: 5.56m Weight 4 x 4: 6,350kg Weight 4 x 2: 6,260kg Options: 4x4/Jib Foam filled tyres Generator Minimum hire period applies PRICE ON APPLICATION VAN MOUNTS Suitable for use when you want to be able to move the boom from site to site very easily as the booms are mounted on a road-going vehicle either a flat bed truck or van. Working heights: 14 72m Largest fleet of 4 x 4 machines ideal for off road Narrow jacking and zero tail swing models available ideal for on road working Minimum hire period applies PRICE ON APPLICATION 24 Find your nearest Branch: