IEEE 802.11ac: What Does it Mean for Test?



Similar documents
IEEE802.11ac: The Next Evolution of Wi-Fi TM Standards

Whitepaper n The Next Generation in Wireless Technology

Understanding the IEEE ac Wi Fi Standard Preparing for the next gen of WLAN

GTER 26 tudo o que você. quer saber sobre n

Design Considerations for DVT and Manufacturing Test of Wireless Devices

HUAWEI Enterprise AP Series ac Brochure

Whitepaper. Next Generation Gigabit WiFi ac

Planning for ac Adoption with Ekahau Site Survey 6.0

IEEE n Enterprise Class Wireless LAN?

Introduction to Wireless LAN Measurements

Qualcomm Atheros, Inc ac MU-MIMO: Bridging the MIMO Gap in Wi-Fi

IEEE ac in Service Provider Wi-Fi Deployments: Consider More Than Speed

AC Wi-Fi Range Extender RE355. Highlights. Description

LTE, WLAN, BLUETOOTHB

HomePlug AV2 Technology

802.11ac: The next Wi-Fi generation Gigabit Speed Wi-Fi

802.11ac Wi-Fi Fundamentals Eric Johnson March 2014

Keysight Technologies Solutions for WLAN ac Manufacturing Test

AC Wi-Fi Range Extender RE580D. Highlights

Hot Issues in Wireless Broadband Networking

Main Ways to Enhance Throughput

Wireless Ethernet LAN (WLAN) General a/802.11b/802.11g FAQ

MoCA 1.1 Specification for Device RF Characteristics

AC 750. Wi-Fi Range Extender RE210. Highlights. Description

WiMAX and the IEEE m Air Interface Standard - April 2010

AC Wireless Dual Band PCI Express Adapter. Highlights

HD Radio FM Transmission System Specifications Rev. F August 24, 2011

Top Six Considerations

Next Generation Gigabit WiFi ac

Lecture 17: Wireless Networking"

Wi-Fi CERTIFIED n: Longer-Range, Faster-Throughput, Multimedia-Grade Wi-Fi Networks

DOCSIS 3.1. High Level Overview at NANOG 59. Karthik Sundaresan, Lead Architect. Oct 09, Cable Television Laboratories, Inc.

WLAN ac Technology White Paper HUAWEI TECHNOLOGIES CO., LTD. Issue V1.0. Date

Wi-Fi Capacity Analysis for ac and n: Theory & Practice

ZyXEL Smart Antenna - The solution to Wi-Fi challenges

EAP N Wall Mount Access Point / WDS AP / Universal Repeater

What is ? Why are standards important?

AC Wi-Fi Range Extender RE450. Highlights. Description

AV1200 TL-PA8030P KIT. 3-Port Gigabit Passthrough Powerline Starter Kit. Highlights

Testing WLAN Devices According to IEEE Standards. Application Note

Wi-Fi CERTIFIED Voice-Personal: Delivering the Best End-User Experience for Voice over Wi-Fi

Demystifying Wireless for Real-World Measurement Applications

Guide for wireless environments

WHITE PAPER JULY 2012 WHAT YOU NEED TO KNOW ABOUT AC DEMYSTIFYING THE BUSINESS AND TECHNICAL IMPLICATIONS OF THE NEXT GENERATION OF WLAN

What s The Difference Between Bit Rate And Baud Rate?

zseries 18-Slot Chassis 18-Slot 3U PXI Express Chassis with AC Up to 8 GB/s

VOICE OVER WI-FI CAPACITY PLANNING

LTE-Advanced Carrier Aggregation Optimization

MIMO Antenna Systems in WinProp

Evolution of the Air Interface From 2G Through 4G and Beyond

Product Specifications

Medical Device Connectivity

Wireless Multi-Mode AP Router. AP Only. WDS Repeater. WDS Only. Adapter WAN. Port LAN LAN

Attenuation (amplitude of the wave loses strength thereby the signal power) Refraction Reflection Shadowing Scattering Diffraction

Frequency Hopping Spread Spectrum (FHSS) vs. Direct Sequence Spread Spectrum (DSSS) in Broadband Wireless Access (BWA) and Wireless LAN (WLAN)

NEW WORLD TELECOMMUNICATIONS LIMITED. 2 nd Trial Test Report on 3.5GHz Broadband Wireless Access Technology

SURVEY OF LTE AND LTE ADVANCED SYSTEM

802.11ac Power Measurement and Timing Analysis

APC series overview. Copyright 2014 Deliberant LLC

Cooperative Techniques in LTE- Advanced Networks. Md Shamsul Alam

300Mbps. Wi-Fi Range Extender TL-WA855RE. Highlights. Description

ALLION USA INTERNET SERVICE PROVIDER WIRELESS GATEWAY COMPETITIVE ANALYSIS

Delivering 4x4 MIMO for LTE Mobile Devices. March SkyCross Dual imat 4x4 MIMO Technology for LTE. Introduction

USB 3.0* Radio Frequency Interference Impact on 2.4 GHz Wireless Devices

24 GHz Point-to-Point 1.4+ Gbps Radio. Datasheet. Model: AF24. High Performance Wireless Backhaul. Long Range of 13+ km

Understanding and Optimizing n

Chapter 3 Cellular Networks. Wireless Network and Mobile Computing Professor: Dr. Patrick D. Cerna

Spring Final Project Report

AC1750 Smart WiFi Router ac Dual Band Gigabit

500M Powerline Pass-Through Ethernet Bridge

Chapter 3: Spread Spectrum Technologies

Wharf T&T Limited Report of Wireless LAN Technology Trial Version: 1.0 Date: 26 Jan Wharf T&T Limited. Version: 1.0 Date: 26 January 2004

Cloud-based Wireless LAN for Enterprise, SMB, IT Service Providers and Carriers. Product Highlights. Relay2 Enterprise Access Point RA100 Datasheet

What is going on in Mobile Broadband Networks?

communication over wireless link handling mobile user who changes point of attachment to network

APPLICATION NOTE. Atmel AT02845: Coexistence between ZigBee and Other 2.4GHz Products. Atmel MCU Wireless. Description. Features

Welcome. Rulon VanDyke RF System Architect, Agilent Technologies. David Leiss Senior RF Simulation Consultant, Agilent Technologies

The cost and performance benefits of 80 GHz links compared to short-haul GHz licensed frequency band products

750Mbps ac Wireless Broadband Router

From reconfigurable transceivers to reconfigurable networks, part II: Cognitive radio networks. Loreto Pescosolido

BENEFITS OF USING MULTIPLE PLP IN DVB-T2

Voice services over Adaptive Multi-user Orthogonal Sub channels An Insight

Wireless Technologies for the 450 MHz band

Comparing WiMAX and HSPA+ White Paper

Maximizing Range and Battery Life in Low-Cost Wireless Networks

ACRS 2.0 User Manual 1

Real-Time Spectrum Analysis for Troubleshooting n/ac WLAN Devices

ARUBA RAP-100 SERIES REMOTE ACCESS POINTS

A Performance Study of Wireless Broadband Access (WiMAX)

ARUBA RAP-3 REMOTE ACCESS POINT

ACCOMMODATING IOT / M2M REQUIREMENTS IN THE CELLULAR ECOSYSTEM Mahendra Agarwal Architect, Wipro Tecnologies

Transmit Smart with Transmit Beamforming

The Home Network Our Neglected Workhorse. An IDC InfoBrief, sponsored by Linksys May 2015

ARUBA INSTANT 103 IAP-103 HP 103 INSTANT

Wireless Broadband Access

Agilent GSM/EDGE Base Station Test with the E4406A VSA and ESG-D Series RF Signal Generators Product Overview

802.11ad - WLAN at 60 GHz A Technology Introduction White Paper

NEWSGATHERING TRANSMISSION TECHNIQUES. Ennes Workshop Miami, FL March 8, 2013 Kevin Dennis Regional Sales Manager

Distributed Antenna Systems and MIMO Technology

Transcription:

WHITEPAPER IEEE 802.11ac: What Does it Mean for Test? 2013 LitePoint, A Teradyne Company. All rights reserved.

Table of Contents Introduction to 802.11ac... 2 802.11ac: Overview... 3 Market Forecast... 6 Specifications... 7 Applications... 11 Testing 802.11ac... 13 Concluding Remarks... 14 Appendix I: References... 14 Appendix II: Curiosities... 14 IEEE 802.11ac: What Does it Mean for Test? 1

Introduction to 802.11ac Late in 2008, a new task group (TG) was formed within the IEEE 802 Standards Committee with the goal of creating a new amendment to the 802.11-2007 standard. The new amendment, known as 802.11ac, includes mechanisms to improve the data throughput of the existing Wireless Local Area Networks (WLAN), enabling wireless networks to offer wired network performance. Since its formation, the TGac has made significant progress in the definition of the technology: in January 2011, the framework specifications for the technology moved into draft form, which then underwent subsequent revisions and is currently available in version D1.1. The draft was completed at the end of 2012, a certification program was established in June 2013, and ratification of the 802.11ac standard is planned for February 2014 (as shown in Figure 1). The TGac is formed Draft D 1.0 is released First 802.11ac end-user products Ratification planned for February 2014 2008 2011 2012 2013 2014 Framework moves into draft D 0.1 First 802.11ac Si shipments Established Certification Program Figure 1: History and Future Dates of the 802.11ac Amendment Even though the 802.11ac amendment will not be published until early 2014, the draft availability means that the silicon requirements are generally finalized, and chipset companies were able to begin marketing their 802.11ac devices the latter half of 2011. The first 802.11ac silicon shipments began in early 2012. Dozens of routers, access points, and dongles have been introduced to the market since then, and the first 802.11ac-enabled smart phones were introduced in early 2013. 802.11ac is expected to make a substantial impact in the marketplace, with over one billion ICs forecasted to be shipped worldwide by 2015. There are multiple reasons for the very high expectations around 802.11ac. First, not only does the technology promise to deliver for the first time data rates over 1 Gbps, but also includes advanced features to improve the user experience. Similar to LTE Advanced, it employs more spatial streams through 8 x 8 Multiple-Input Multiple-Output (MIMO), offers wider channel bandwidths (up to 80 channels) and even makes use of channel aggregation, for up to 160 of total bandwidth. Furthermore, key to the success of 802.11ac will be that it is an evolutionary technology: it achieves its goals, and breaks a few important paradigms, while building on the existing 802.11n amendment. This is a great advantage since it enables manufacturers and users a relatively easy transition from existing WLAN networks and applications (which use 802.11n or previous amendments), to those that will use 802.11ac. In this document we will describe the motivations, key features, and market forecast of 802.11ac. We will then review the current 802.11ac physical layer (PHY), and the several applications enabled by the new 802.11ac capabilities. Finally, we will discuss how new 802.11ac specifications impact the requirements for test equipment necessary to validate the technology in both R&D and manufacturing environments. About LitePoint LitePoint provides automated, complete solutions to test all key wireless connectivity and cellular standards, including WiFi. LitePoint is part of the WiFi ecosystem and takes pride in sharing its expertise with you, through its website and publications. If you have questions or feedback about this booklet, or simply want to connect with LitePoint, please email sales@litepoint.com IEEE 802.11ac: What Does it Mean for Test? 2

802.11ac: Overview Motivations The purpose of the 802.11ac amendment is to improve the WiFi user experience by providing significantly higher throughput for existing application areas, and to enable new market segments for operation below 6 GHz including distribution of multiple data streams. With data rate over 1 Gbps and several new features, throughput and application-specific performance of 802.11ac promise to be comparable to that of existing wired networks. Also known as Very High Throughput (VHT), 802.11ac achieves this purpose by building on the existing 802.11n technology. In doing so, it continues the long-existing trend towards higher data rates (Figure 2), to meet the growing application demand for WiFi network capacity and enable WiFi to remain the technology of choice at the edge. To increase data rates, the TG for 802.11ac has defined an ample set of optional parameters in addition to some that are mandatory. The flexibility built in the technology is typical of the latest wireless technologies (see LTE), and enables chipset and device manufacturers to make the best use of the available resources and tailor their products to the specific need of the targeted application. Specifically, the TGac has defined optional parameters for: Channel Bandwidth Modulation Number of Spatial Streams An 802.11ac device making use of only the mandatory parameters (80 bandwidth,1 spatial stream, 64 QAM, 5/6 coding with long guard interval) will be capable of a data rate of about 293 Mbps. A device that implements all optional parameters (160 bandwidth, 8 spatial streams, 256QAM, 5/6 coding with short guard interval) will be able to achieve over 6 Gbps. Max Data Rate (Mbps) 10,000 1,000 100 10 1 802.11 802.11b 802.11 a(g) 802.11ac (4x4, 160 ) 802.11n (4x4, 40 ) Figure 2. 802.11ac continues the trend of WiFi technologies towards higher data rates.1 1995 2000 2005 2010 2015 Key Characteristics Year 802.11ac adopts several features and unique mechanisms to increase throughput, improve the user experience, and more. The key characteristics of this new technology are: 5 GHz Frequency Band Wide Channel Bandwidth New Modulation and Coding Scheme (MCS) Backwards Compatibility Coexistence Multiple Spatial Streams Beamforming and Multi-User MIMO Energy Efficiency IEEE 802.11ac: What Does it Mean for Test? 3

5 GHz Frequency Band Contrary to 802.11n, which operates in both the 2.4 GHz and 5 GHz RF bands, 802.11ac devices will operate only in the 5 GHz RF band. The choice to restrict usage in this band is mainly driven by the wider channel bandwidth requirements for 802.11ac. As the bandwidth increases, channel layout becomes a challenge, especially in the crowded and fragmented 2.4 GHz band. Even in the relatively expansive 5 GHz band, manufacturers will need to adapt automatic radio tuning capabilities to use the available resources wisely and conserve spectrum. Wide Channel Bandwidth 802.11ac includes both manditory and optional bandwidth enhancements over 802.11n. In addition to the 20 and 40 channel bandwidths supported by most 802.11n devices today, the 802.11ac draft specifications include a mandatory, contiguous 80 channel bandwidth. The key benefit of this wider bandwidth is that it effectively doubles the PHY rate over that of 802.11n at negligible cost increase for the chipset manufacturer. With 80 contiguous bandwidth mode, not only is the data rate/throughput higher, but also the efficiency of the system increases, and data transfers can be made faster, thus enabling new applications not supported by the current 802.11n specifications. In addition, the 802.11ac specifications include an optional 160 channel bandwidth, which can be either contiguous or non-contiguous (80+80 ). In the non-contiguous case, the frequency spectrum consists of two segments; each segment is transmitted using any two 802.11ac 80 channels, possibly non-adjacent in frequency. Compared with 40/80 transmissions, 160 PHY transmission has the advantages of reducing the complexity of the requirements (e.g. MIMO order, MCS, etc) that allow devices achieve Gbps wireless throughput, and opening the door to more applications. However, 160 bandwidth in the 5 GHz band is not available worldwide, and implementations to support this feature will likely be higher in cost hence, the decision to make this feature optional in 802.11ac devices. New Modulation and Coding Scheme (MCS) 802.11ac uses 802..11n OFDM (Orthogonal Frequency Division Multiplexing) modulation, interleaving, and coding architecture. Specifically, both 802.11ac and 802.11n require device support for BPSK, QPSK, 16QAM and 64QAM modulation. However, there are two key differences with respect to the 802.11n specifications. First of all, 802.11ac includes an approved constellation mapping enhancement, specifically, optional 256QAM (3/4 and 5/6 coding rates) that can be used for both 802.11ac 80 and 160 transmissions. The benefit of 256QAM is that it offers 33% greater throughput than a 64QAM transmission. This increase comes, however, at the cost of less tolerance of bit errors in lossy signal environments. The 256QAM modulation was added as an optional mode, as opposed to a mandatory mode, for the following reasons: Allow design flexibility Lower implementations cost for applications that do not need the higher modulation Ease the adoption of 802.11ac in devices that cannot meet the stringent requirements of the 256QAM mode in terms of: - EVM (Error Vector Magnitude) - SNR (Signal-to-Noise Ratio) - PAPR (Peak-To-Average-Power Ratio) The second difference to 802.11n is that the number of defined MCS indices is greatly reduced. Only ten single user MCS (0 to 9) are defined in 802.11ac, significantly fewer than the 77 MCS indices specified in 802.11n. 802.11n required 77 MCS indices to support unequal modulations, e.g. a single user might receive a BPSK-modulated signal on one stream and a 16QAM-modulated signal on another. 802.11ac supports only equal modulations. The TGac decided to drop support of unequal modulations because this feature proved not to be successful in the marketplace (very few 802.11n devices actually supported it). Also, given the additional channel bandwidth and modulation options in 802.11ac, the number of possibilities (hence, the number of MCS indices) would be impractical. IEEE 802.11ac: What Does it Mean for Test? 4

Backwards Compatibility 802.11ac provides backwards compatibility with 802.11a and 802.11n devices operating in the 5 GHz band. This means that: 802.11ac interworks with devices supporting 802.11a and 802.11n technologies 802.11ac frame structures can accommodate transmission with 802.11a and 802.11n devices The backward compatibility of 802.11ac is a definite advantage of 802.11ac over alternative revolutionary technologies (such as 802.11ad) that also promise to increase data rate over 802.11n, but do not operate with existing WLAN devices. Backward compatibility will ease adoption into the marketplace and ensure 802.11ac devices can seamlessly plug into existing WLAN networks. Coexistence An important component of the work in TGac is to design mechanisms to coexist with existing networks using 802.11a and 802.11n in the 5 GHz band. Examples of these mechanisms are Clear Channel Assessment (CCA), channel access fairness, and scanning and channel selection mechanisms. Coexistence mechanisms are also being defined to ensure 802.11ac with different channel bandwidths (20/40/80, and up to 160 ) interoperate. Multiple Spatial Streams 802.11ac includes support for up to eight spatial streams, versus four in 802.11n. As in 802.11n, spatial multiplexing of multiple streams of data over the same frequencies takes advantage of the extra degrees of freedom provided by the independent spatial paths to effectively multiply channel capacity. The streams become combined as they pass across the channel, and the task at the receiver is to separate and decode them. Despite the complexity of this technique, manufacturers of 802.11n devices have learned to use the independent paths between multiple antennas to great effect, and can now effectively transpose this knowledge to the making of 802.11ac devices. It is likely that the first 802.11ac silicon will use multiple spatial streams. Beamforming and Multi-User MIMO With 802.11n, manufacturers of WiFi devices learned how to use transmit beamforming, that is, the ability to focus RF energy in a given direction to improve delivery to individual stations. 802.11ac builds on this knowledge and includes enhancements such as single sounding and feedback format (vs. multiple in 802.11n). More importantly with 802.11ac, the TGac has built on the beamforming capabilities of 802.11n new mechanisms that enable an access point (AP) to communicate with multiple client devices in different directions simultaneously using the same channel, multiple antennas, and spatial multiplexing. For example, an eight-antenna AP might be able to use 4x4 MIMO to two physically separated stations at once. To contrast, MIMO devices today only considers point-to-point access to the multiple antennas connected to each individual terminal; hence, the AP must time multiplex to serve multiple clients. This set of advanced mechanisms takes the name of Multi-User MIMO (MU-MIMO), and it is one of the most interesting enhancements currently on the drawing board of the TGac to increase the efficiency (number of megabits transmitted per megahertz of spectrum, Mbps/) of the newest 802.11 standard. To use an analogy, MU-MIMO leverages the fundamental of Ethernet switching, by reducing contention: it extends transmit beamforming technology to allow the AP to provide switched WiFi with dedicated bandwidth to stations, similar to the way the typical wired Ethernet network works today. While the promised advantages of MU-MIMO are many and attractive, correctly using the technology requires that chipset designers and manufacturers develop spatial awareness of clients and sophisticated queuing systems that can take advantage of opportunities to transmit to multiple clients when conditions are right. In other words, the increased system capacity comes at the cost of significantly more expensive signal processing and increased complexity. For this reason, MU-MIMO (one transmitting device, multiple receiving devices) is included in the 802.11ac draft specifications only as an optional mode. IEEE 802.11ac: What Does it Mean for Test? 5

Energy Efficiency A little known fact is that the energy efficiency, described in bits per microjoule, of the 802.11 standards has been increasing since the first amendment of the technology was ratified. Specifically, 802.11ac promises a twofold increase in energy efficiency over the existing 802.11n, as shown in Figure 3. This improvement is an effect of the several enhancements introduced by each amendment to increase the data rate of a transmission, with all other parameters constant (RF frequency, power, and bandwidth). While the trend is little known, the increasing energy efficiency certainly has numerous benefits for the growing number of portable devices that integrate WiFi, which must work with small batteries and limited power consumption available to support the wireless communications link. 1,600 1,400 802.11ac (1x1) Figure 3. 802.11ac offers improved energy efficiency over previous 802.11 standards Energy Efficiency (bits per microjoule) 1,200 1,000 800 600 400 802.11 a/g 802.11n (1x1) 200 0 0 100 200 300 Data Rate (bps) Market Forecast The number of wireless devices that support 802.11n has been growing rapidly in the several past years, and this growth is expected to continue in the future. Not only devices that have traditionally used previous amendments (802.11a/b/g) are adopting the newer technology, but also wireless is moving into a growing number of devices that previously did not have this capability. In 2012, over 1.4 billion devices were shipped containing WiFi functionality, including smartphones, tablets, PCs, routers/access points, Internet access devices, automotive infotainment, and assorted consumer electronics products (sources: IDC, IHS, and Gartner, March 2013). The consumption of WiFi ICs is expected to grow more than 25% in 2013 to over 1.8 billion units. Smartphone and tablets make up the lion s share of those shipments (over 58%). Some estimates put the installed base of Internet of Things devices at between 30 and 50 billion by the year 2020, many of those being WiFi-enabled. IEEE 802.11ac: What Does it Mean for Test? 6

The 802.11ac standard will definitely play an important role in this growth, by both replacing 802.11n in current devices and opening the door to new applications similarly to what 802.11n has done in the past years. The first 802.11ac silicon shipments began in early 2012, and end-user products appeared in the marketplace in the third quarter of the same year. The real impact of 802.11ac, however, will probably be felt in 2014 and beyond. In 2015, shipments of 802.11ac-equipped mobile devices are forecast to approach 1 billion (Figure 4), accounting for nearlly half of the entire WLAN market in that year. 1000.0 Total SISO/MIMO 802.11ac Market Figure 4. World market forecast of 802.11ac unit shipments. Shipments (Millions) 800.0 600.0 400.0 200.0 0.0 2010 2011 2012 Year 2013 2014 2015 Specifications As mentioned, 802.11ac PHY is based on the well known OFDM PHY used for 802.11n, with some important modifications necessary to meet the 802.11ac s goals. Some of the key technical specifications that distinguish 802.11ac from 802.11n are summarized in Table 1, and discussed below. As will be discussed, some differences have a significant impact on the requirements for the test equipment needed to verify the functionality of 802.11ac-enabled devices. This topic will be the subject of a later part of this document. Table 1. Comparison of 802.11ac and 802.11n Technical Specifications Technical Specification 802.11n 802.11ac Frequency 2.4, 4.9, 5 GHz 5 GHz Modulation Scheme OFDM OFDM Channel Bandwidth Nominal Data Rate, Single Stream Aggregate Nominal Data Rate, Multiple Streams 20, 40 Up to 150 Mbps (1x1, 40 ) Up to 600 Mbps (4x4, 40 ) 20, 40, 80 (160 optional) Up to 433 Mbps (1x1, 80 ) Up to 867 Mbps (1x1, 160 ) Up to 1.73 Gbps (4x4, 80 ) Up to 3.47 Gbps (4x4, 160 ) Time to Stream 1.5hr HD ~ 30 min (4x4, 40 ) ~ 15 min (4x4, 80 ) Spectral Efficiency 15 bps/hz (4x4, 40 ) 21.665 bps/hz (4x4, 80 ) EIRP 22-36 dbm 22-29 dbm Range 12-70 m indoor 12-35 m indoor Through Walls Y Y Non-Line-of-Sight Y Y World-Wide Availability Y Y limited in China IEEE 802.11ac: What Does it Mean for Test? 7

Channels Figure 5 describes the spectral mask specifications for 802.11ac devices to operate with 20, 40, 80 and contiguous 160 channel bandwidth. Importantly, the widest channel occupies a wide range of frequencies of 240 : as will be discussed later, this requires manufactures to have proper care in choosing the test equipment for their devices, to ensure it can transmit (capture) the 802.11ac signals to (from) their devices. Given the limited spectrum availability, and significant design and test challenges, the 160 channel is specified optional in the currently available 802.11ac draft (D1.1). 0 dbr -20 dbr -28 dbr -40 dbr ƒ 1 ƒ 2 ƒ 3 ƒ 4 Channel Size ƒ 1 ƒ 2 ƒ 3 ƒ 4 20 9 11 20 30 40 19 21 40 60 80 39 41 80 120 160 79 81 160 240 Figure 5. Spectral Mask for 20, 40, 80, and contiguous 160 Channels. In addition to a contiguous 160 channel, the TGac has also specified an optional non-contiguous 160 channel, which uses two nonadjacent 80 channels. Creating the proper spectral mask for the channel requires the following steps: 1. The 80 spectral mask is placed on each of the two 80 segments 2. Where both masks of the two 80 channels have values between -20 dbr and -40 dbr: The resulting mask value is the sum of the two mask values in the linear domain 3. Where neither mask has value between 0 dbr and -20 dbr: The resulting mask value is the highest of the two masks 4. For any other frequency region, The resulting mask value is a linear interpolation in the db domain between the two nearest frequency points with defined mask values IEEE 802.11ac: What Does it Mean for Test? 8

PSD 0 dbr -28 dbr -20 dbr -25 dbr Figure 6 shows an example of a transmit spectral mask for a non-contiguous transmission using two 80 channels where the center frequencies of the two 80 channels are separated by 160. -40 dbr -200-160 -121-119 -80-41 -39 39 41 80 119 121 Freq [] 160 200 Figure 6. Example of 802.11ac 160 Non-Contiguous Channel. Channelization As mentioned, the choice to restrict usage of 802.11ac in the 5 GHz RF band only was dictated by the wider channel bandwidth requirements for 802.11ac, which makes channel layout challenging in the crowded 2.4 GHz band. Even in the 5 GHz spectrum, however, the availability of 80 and 160 channel is somewhat limited, especially in some regions. US Europe & Japan IEEE channel # 20 40 80 160 IEEE channel # 20 40 5170 5330 36 40 44 48 52 56 60 64 5170 5330 36 40 44 48 52 56 60 64 5490 5730 100 104 108 112 116 120 124 128 132 136 140 144 5490 5710 100 104 108 112 116 120 124 128 132 136 140 5735 149 153 157 161 165 5835 Figure 7 shows the current spectrum availability for 802.11ac operation, by geography. Availability is greatest in the US, with five 80 channels and two 160 channels. Europe and Japan follow closely, lacking only the highest frequency 80 channel. In India and China, the availability is roughly halved due to reduced spectrum availability. India 80 * 160 * IEEE channel # 20 40 80 160 5170 5330 36 40 44 48 52 56 60 64 5170 5330 5735 149 153 157 161 165 5735 5835 5835 China IEEE channel # 36 40 44 48 52 56 60 64 149 153 157 161 165 Figure 7. Current spectrum availability for 802.11ac operation in select geographic markets 20 40 80 IEEE 802.11ac: What Does it Mean for Test? 9

Constellation Mapping One method to increase data rates and spectral efficiency in communication systems is to transmit more bits per symbol by moving to a higher-order constellation. However, if the mean energy of the constellation is to remain the same, the constellation points are closer together and are thus more susceptible to noise and other corruption. Recently, advances in both chip manufacturing technology and processing power have made it possible to use more sensitive coding techniques that depend on finer distinctions in the received signal as well as more aggressive error correction codes that use fewer check bits for the same amount of data. These advances have encouraged the adoption of the optional 256QAM constellation mapping in 802.11ac. The 64QAM constellation mapping, defined in the 802.11n standard, will remain mandatory for 802.11ac devices. 16 16 64 64 16 16 64 64 Figure 8. The 802.11ac standard include the definition of the optional constellation bit encoding for 256QAM (right, with 64 bits for quadrant), which trades resilience to noise and interference for much faster data rates and higher levels of spectral efficiency when compared to the constellation for 64QAM (left, with 16 bits for quadrant) Ideal 64 QAM Constellation Ideal 256QAM Constellation MCS As mentioned, the number of MCA in 802.11ac is greatly reduced in comparison to 802.11n. Table 2 shows the 802.11ac single user MCS indices, and corresponding modulation and coding rate. Table 2. 802.11ac single user MCS indices MCS Modulation Coding Rate 0 BPSK 1/2 1 QPSK 1/2 2 QPSK 3/4 3 16-QAM 1/2 4 16-QAM 3/4 5 64-QAM 2/3 6 64-QAM 3/4 7 64-QAM 5/6 8 256-QAM 3/4 9 256-QAM 5/6 IEEE 802.11ac: What Does it Mean for Test? 10

Transmitter Constellation Error The transmitter constellation error is defined as the relative constellation RMS error, calculated by first averaging over subcarriers, frequency segments, OFDM frames and spatial streams. The most recent 802.11ac draft specifies that this value shall not exceed a data-rate dependent value according to Table 3, assuming that the transmitted signal is at least 19 frames with 16 symbols per frame and contains random data. (Note that the transmitter constellation error requirement is the same regardless of the signal bandwidth.) The introduction of the higher modulation, namely the 256QAM mode, requires the 802.11ac transmitters to perform with significantly better accuracy (lower constellation error) than what required to existing 802.11n transmitters. Precisely, down to -32 db constellation error should be demonstrated by devices that want to operate using the optional 256QAM. Not only does this requirement puts significant pressure on designers and manufacturers of 802.11ac devices, but also, as we will be discussed later, has an obvious impact on the performance of the test equipment used to verify the transmitter performance. Applications The single-link and multi-station enhancements supported by 802.11ac can improve the performance and user experience in well-known WLAN applications, and enable several new ones, particularly in the following markets: Table 3. Data-rate dependent maximum transmitter constellation error for 802.11ac devices Modulation Coding Rate BPSK 1/2-5 QPSK 1/2-10 QPSK 3/4-13 16-QAM 1/2-16 16-QAM 3/4-19 64-QAM 2/3-22 64-QAM 3/4-25 64-QAM 5/6-28 256-QAM 3/4-30 256-QAM 5/6-32 Relative constellation error (db) Access Points Home Entertainment Portable Computing PC Peripherals Mobile Phones Mobile Entertainment Access Points Access Points (APs) will use the enhanced MIMO capabilities of 802.11ac to effectively increase the capacity of any home or business WLAN network. With its enhanced multiple-stream technology and new MU-MIMO capabilities, 802.11ac promises to increase the network capacity substantially, and more effectively support the need of the APs to connect with a growing number and variety of wireless-enabled devices used inside the home. APs were some of the very first MIMO 802.11ac-enabled products to hit the market in the second half of 2012. Home Entertainment 802.11ac can be used in TVs, Set-Top Boxes, and Networked Game Consoles to enable in-home distribution of HDTV and other content, including simultaneous streaming of HD video to multiple clients throughout the home. These devices and applications suffer less from the space and power constraints typical of mobile devices, and are some of the best candidates for the successful application of the 802.11ac newly enhanced MIMO techniques (up to 4x4 MIMO - and beyond). Mobile Entertainment The increased data rate and higher energy efficiency of 802.11ac are ideal for applications in mobile entertainment devices such as music players, handheld gaming devices, and wireless-enabled cameras and camcorders. Without adding too much to the limited power consumption availability of these devices, 802.11ac can enable, for example, the rapid synchronization and backup of large data files between these devices and a personal computer (PC) or tablet. Due to constraints in term of both power consumption and physical space, it is likely that first generations of these devices will use only SISO or 2x2 MIMO 802.11ac chipsets. IEEE 802.11ac: What Does it Mean for Test? 11

Portable Computing Portable computing devices such as PCs, laptops, slates and tablets, are obvious ideal candidates for 802.11ac. The growing number of wireless applications supported by these devices, and the increasing demand for faster connectivity by their users, will be the key drivers for adoption of 802.11ac. Portable computing devices will use 802.11ac, as mentioned, for rapid synchronization and backup of large data files with other 802.11ac-enabled devices, or for the streaming of HD video and other content. PC Peripherals The enhanced throughput of 802.11ac might enable, in the future, replacing with a wireless link the wired connection between portable computing devices and their peripheral devices. A promising application is, for example, wireless displays for laptops. To enable the very high throughput necessary for these applications will require device manufacturers to overcome the challenges of implementing MIMO 802.11ac techniques in the form factors of these devices. Mobile Phones Mobile phones, specifically smartphones, can use 802.11ac to communicate with mobile entertainment devices and portable computing devices for the rapic synchronization of large data file, and more in general to support the growing demand of faster data transfer by their users. These devices need high throughput but are also generally small and conscious about power consumption, hence, 802.11ac will probably be implemented single stream only. The first 802.11ac-enabled smartphones were introduced in early 2013. Typical 802.11ac Configurations Table 4 presents some examples of 802.11ac configurations between an AP and another 802.11ac-enabled network client device (STA). The PHY link rate and aggregate capacity assume 256QAM, rate 5/6, and short guard interval (400 ns). Table 4. Examples of 802.11ac configurations (all rates assume 256QAM, rate 5/6) Configuration Typical Client (STA) Form Factor PHY Link Rate Aggregate Capacity 1-antenna AP, 1-antenna STA, 80 2-antenna AP, 2-antenna STA, 80 1-antenna AP, 1-antenna STA, 160 2-antenna AP, 2-antenna STA, 160 4-antenna AP, 4 1-antenna STAs, 160 (MU-MIMO) Mobile Phone, Mobile Entertainment Device Tablet, Laptop, Networked Game Console Mobile Phone, Mobile Entertainment Device Tablet, Laptop, Networked Game Console Mobile Phone, Mobile Entertainment Device 433 Mbit/s 433 Mbit/s 867 Mbit/s 867 Mbit/s 867 Mbit/s 867 Mbit/s 1.73 Gbit/s 1.73 Gbit/s 867 Mbit/s to each STA 3.47 Gbit/s 8-antenna AP, 160 (MU-MIMO) 1 4-antenna STA 1 2-antenna STA 2 1-antenna STAs TV, Set-Top Box, Tablet, Laptop, Networked Game Console, Mobile Phone 3.47 Gbit/s to 4-antenna STA 1.73 Gbit/s to 2-antenna STA 867 Mbit/s to 1-antenna STA 6.93 Gbit/s 8-antenna AP, 4 2-antenna STAs, 160 (MU-MIMO) TV, Set-Top Box, Tablet, Laptop, PC 1.73 Gbit/s to each STA 6.93 Gbit/s IEEE 802.11ac: What Does it Mean for Test? 12

Testing 802.11ac Not surprisingly, the important changes in 802.11ac with respect to 802.11n challenge designers and manufacturers of 802.11ac devices in several, significant ways. Not only do they need to work with the design implications of 8 spatial streams, wider bandwidth, and more, but also face significant test challenges. Specifically, they require test systems that are flexible enough to evolve with the latest 802.11 standard. As a minimum, any test equipment they choose to test their new 802.11ac devices will require: wide VSA/VSG IF bandwidth full support to 802.11ac MIMO enhancements improved modulation accuracy for 802.11ac transmitter modulation testing VSA/VSG IF Bandwidth 802.11ac presents significant new challenges for test due to the bandwidth increase. 802.11ac effectively obsoletes most (if not all) available test equipment combining a vector signal analyzer and vector signal generator (VSA/VSG) in a single box, which simply do not have the required 120 or 240 IF bandwidth for testing the 80 or 160 channels of the new technology. In choosing equipment for 802.11 testing today, device manufacturers should ensure that it is capable of testing the very wide 802.11ac spectrum mask. Support to 802.11ac MIMO Enhancements Not only does 802.11ac present challenges for bandwidth, it also drives MIMO test requirements. Correct MIMO testing requires independent capture and generation of the signals to and from the 802.11ac device, which uses up to 8 spatial streams and several other enhancements to improve performance over existing 802.11n MIMO systems. To verify MIMO performance accurately, especially in an R&D environment, 802.11ac-capable test equipment should support up to 8 independent VSA and VSG resources, as well as include support to the new 802.11ac MIMO enhancements. Improved VSA/VSG EVM As the requirements for the modulation accuracy (relative constellation RMS error) of the 802.11ac transmitter rise, so do the requirements of the equipment necessary to test it. The transmitter modulation accuracy is measured by the error vector magnitude, EVM, and requires the VSA and test equipment to add negligible (ideally, zero) distortion to the captured signal. The distortion added by the VSA is also measured in terms of EVM and, typically, chipset makers want their test equipment to perform at least 10 db better than the silicon specification. For 802.11ac-capable test equipment, this translates into a requirement for the maximum EVM of the VSA of: Max device EVM (-32 db at 256QAM) 10 db = -42 db Device makers should select their test equipment to meet or exceed this performance. IEEE 802.11ac: What Does it Mean for Test? 13

Concluding Remarks 802.11ac represents a significant evolution in WLAN communication systems. 802.11ac devices make use of OFDM modulation principles as 802.11n, but use wider channel bandwidth, higher modulation, more stream, and enhanced MIMO techniques to increase throughput and enable faster, new applications. Designers and manufacturers of 802.11ac devices need to understand the requirements for this new technology not only to create their products, but also to ensure that their test equipment is able to tackle the raising challenges of accurately testing their performance. To learn more about 802.11ac testing, please contact LitePoint at sales@litepoint.com Appendix I: References 802.11ac Documents IEEE P802.11ac/D1.1: Draft Amendment 5: Enhancements for Very High Throughput in Bands below 6 GHz Status of Project IEEE 802.11ac http://www.ieee802.org/11/reports/tgac_update.htm Official IEEE 802 Project Timelines http://www.ieee802.org/11/reports/802.11_timelines.htm Appendix II: Curiosities Why is It Called ac? The name should have been ag but it was skipped to avoid confusion with 802.11a/g. IEEE 802.11ac: What Does it Mean for Test? 14

Copyright 2013 LitePoint, A Teradyne Company. All rights reserved RESTRICTED RIGHTS LEGEND No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of LitePoint Corporation. DISCLAIMER LitePoint Corporation makes no representations or warranties with respect to the contents of this manual or of the associated LitePoint Corporation products, and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. LitePoint Corporation shall under no circumstances be liable for incidental or consequential damages or related expenses resulting from the use of this product, even if it has been notified of the possibility of such damages. If you find errors or problems with this documentation, please notify LitePoint Corporation at the address listed below. LitePoint Corporation does not guarantee that this document is errorfree. LitePoint Corporation reserves the right to make changes in specifications and other information contained in this document without prior notice. TRADEMARKS LitePoint and the LitePoint logo, IQxstream, IQview, IQflex, IQnxn, and IQmax are registered trademarks and IQnxnplus, IQsignal, IQwave, IQfact, IQcheck, IQdebug, IQmeasure, IQtest, IQexpress, IQturbo, IQultra, IQxel, IQ2015, IQ2012, IQ201X, IQ2011, IQ2011q IQ2010, TrueChannel, and TrueCable are trademarks of LitePoint Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation in the United States and/ or other countries. All trademarks or registered trademarks are owned by their respective owners. CONTACT INFORMATION LitePoint Corporation 965 W. Maude Ave. Sunnyvale, CA 94085-2803 United States of America Telephone: +1.408.456.5000 Facsimile: +1.408.456.0106 LITEPOINT TECHNICAL SUPPORT www.litepoint.com/support Telephone: +1.408.456.5000 Available: weekdays 8am to 6pm, Pacific Standard Time. E-mail: support@litepoint.com Doc: 1075-0020-001 October 2013 IEEE 802.11ac: What Does it Mean for Test? 15