Master M5 630 Quadra Combat M1 Combat M3 Master M5 Master M5 630
Master M5 630 Digital Flexo for Unlimited Substrates Short web path on 27 chilled drum High PowerIR Dryers on Super Double Drum Multiple PC Control Interfaces New Cold Foil unit for wide web MIS/JDF work fl ow Heavy duty 1.500 mm. diam. rewinder Digital print pressure and register control Heavy duty converting section for labels and carton (optional) Heavy duty 1.500 mm. diam. unwinder The Original Flower (1999) for Print Sleeves Short web path on a 27 driven impression chilled drum Digital automatic pressure and register adjustments The new Master M5 introduce the Digital Flexo technology: print pressure and register are controlled by digital eyes and fi ngers (HD Digital Cameras combined with 7 servo motors per print unit). Master M5 performs the shortest set up times and a digitally controlled quality on labels, aluminum foils, sleeves, carton, laminated tubes and the most diffi cult substrates. Digital die-cutting pressure control Multiple PC Control Interfaces for easy remote press operations Super Double drums for high-power IR dryers on film Error-free JDF/MIS automated file management New high-speed cold foiling unit for sharp details 2
Digital Flexo: digitally operated technologies for automated printing and converting Print Register Print Pressure Die-Cutting Pressure Matrix stripping Print Tutor A GIDUE HD Digital Camera reads a dedicated mark printed by each unit. It recognizes register deviation and dot gain and informs the servo motors on the press. Print Tutor Plus 4 mini servo-motors receive data of actual print from the Print Tutor Camera, confronts with the PDF/TIFF file, and corrects the printing pressure and register according to the original file. Vario Gap 2 mini servo-motors adjust the cutting height of the impression roller to the different thicknesses of the self-adhesive substrates. Quick Cut The press performs automatically the waste stripping without any manual support from the operator. Waste stripping is fully automated. Digital Flexo technology propose a new operator for the labels and packaging industry. Most of the basic operations are performed automatically by the press. The press also helps to avoid mistakes in the file management. Operator can concentrate on top quality and on productivity. Servo adjustments with digital feed-back to perform consistent digital quality Less differences in performance between operators Extremely reduced, and consistent digital wastes 3
The Flower: a miracle of simplicity Applications: unlimited Front insertion of the print element in a low and confortable position Light and small elements for easy storage and handling Shrink Sleeves: relatively easy to print, they give a highly sophisticated 360 decorative effect on bottles. Labels: several printing and converting technologies make PS Labels the most creative packaging product. Change Print Sleeve Change Print Cylinder Alufoil: high cost of alusubstrates take great advantage of low waste GIDUE automation technologies No guides, no sliding elements: every vibration is recuperated for offset fl exo print quality, high production speeds, everlasting stability during the years Open the Flower and change ink tray and doctor-blade Lottery: combination of analog and digital processes make of lottery tickets a true high technology product. The print unit opens like a fl ower: every element is separated and immediately available for change. No adjustments: even unskilled operators can start printing few days after installation due to the patented Pithagora technology. The famous Flower fl exographic print unit since 1999 is the reference in the narrow-web industry for print quality, ease of operation and durability. Its revolutionary concepts have inspired several press manufacturers in the industry. Set-Sleeve: The new offset - style fl exographic print sleeve with lateral side-bearers for vibrationfree high pressure quality printing Lami tubes: substrate instability takes great advantagefrom the accuracy of Digital Flexo technologies. Flexible Packaging: GIDUE automation delivers a proven solution for short-runs high quality fi lm packaging. Several other technical applications (Cigarette Boxes, Cartons, Phone Cards, Sausage Skins) are since years successfully produced on GIDUE presses. 4
Master SL 630: the Food Packaging Program Quick-lock chuck heavy duty roll lifters for unwinders and rewinder Master M5-SL Integrated PC control of servo operated coating motors and tension control technologies for fast recall of tension, lamination and coating parameters. Temperature controlled coating train for accurate adhesive viscosity control Easy-swing technology for front and immediate change of coating roller 3 independent servo motors provide different speeds to the coating rollers for accurate coating, fast set-up and immediate PC recipe storage and recall. The new mid-web Master SL 630 Solventless Laminator in inline with Master M5 630 Flexo Press offers the advantages of UV Flexo technology (high printing quality, consistency, short runs) to the Packaging (and Food Packaging) industry. Laminating BEFORE rewinding avoids contact of the ink with the web, virtually eliminating risks of ink migration and reducing the costs for food compliance certifications. Master SL 630 is fully automated, with several technologies to achieve fast change-over and set-up times. The compact Master M5-SL configuration can be easily installed at Labels and Packaging converters sites for the production of short-runs of high quality packaging. Easy-swing change of coating sleeve for fast and light set-up Triple Servo for accurate coating control and fast set-up Double Servo feeding for fast set up and efficient glue balance In line lamination with Master M5 with compact configuration Off-line lamination of pre-printed webs Accurate reel locking on unwinders-rewinder (ideal for alufoil) Robust manufacturing for up to 250 m/min speed Film-film, film-aluminum, film-paper lamination and others 5
Cold Foil: easy added value HD Carton: all-in-one-pass New Combo foil unwinder-rewinder sliding on front rail Wide-web double supported antiwrinkles web path Open frame and short web path for easy access and handling PC Storage of optimized fi ne-tuned pressures for next job recall Interchangeable die-cutting units on a platform for off-line set-up to reduce times and wastes (pressure-cutting with flexible dies) Heavy Duty manufacturing for up to 600 gsm high speed productivity High gloss true metallic effects for added value packaging Wide-web Cold Foil Combo Laminator slides on the front upperrail to perform cold foil on each print unit High production speeds and reduced tooling costs compared to hot stamping: only a flexo plate is needed Fast start up and practically no waste, with immediate highquality production GIDUE Cold Foil for wide web is an easy opportunity to add value to the packaging with exclusive graphic effects, high production speeds and short set-up times. Master M5-630: Technical details Repeat Print Width Speed Number of units (max) Flexo 12-24 (32 ) 620 150-200 14 Screen 12-25 605 (RSI) 120 5 Hot Stamping 12-24 (32 ) 620 150-200 3 Die-Cutting 16-32 530 150 2+1 6
GIDUE: robust innovation for Labels and Packaging Nuova GIDUE S.r.l. collects the printing and converting competences of high-technology manufacturing companies: Offset presses for paper and packaging (Nuova Castagnoli - Form Consulta S.r.l.). Flexographic presses for labels and packaging (GIDUE S.p.A.). 1981 1984 1986 1993 1995 1999 2000 2002 2003 2004 2004 2005 2005 2006 2006 2007 2008 2009 2010 2010 2011 2011 MiniPrint: Offset printing press for business forms, with variable format cassettes. CS 50 / FC 50: Offset unit produced for Harris Graphics USA VS 1050: Offset unit produced for Harris Graphics USA with plough folders, sheeters, fan folders, high pile deliveries. VS 650: Offset printing press for business forms and commercial printing VS 760: the fi rst Offset mid-web press (760 mm. print width) for the fl exible packaging market (BOPP 38 micron). Flower : the most successful fl exographic print unit in the history of the narrow web industry. An inspiring technology for press manufacturers. The secret of success for hundreds of label printers worldwide. E-Combat : the fi rst true full-servo press in the label industry (servo print and impression cylinders) READY Drop-in silk screen and hot stamping heads movable on each Flower heads. A GIDUE idea, today a standard. Unipro : the fi rst mid-web press with print sleeves followed in 2005 by the *Athena press line. Leonardo, the fi rst Offset print unit for the label industry using printing sleeves with metal side bearers. Intelligent Combat : the fi rst GIDUE fl exo press with fully automatic print pressure adjustment Nemo : the fi rst HD Camera operated register system with PC integrated navigation system. Galileo : the compact rotary offset press for the label industry. Intelligent Camera : the fi rst truly universal register control operated by HD Cameras for each print unit HD Carton: heavy duty converting for cardboard, with interchangeable die-cutting sections on platform. Xpannd : the only Lean Offset press in the label market, with press-integrated cassette storage and handling. HD Hot Stamping: hot stamping tools to a fraction of the costs (150 Euro per plate) and set-up time to less than 15 min. Universal Platform : interchangeable Process Heads movable on a platform, in a Lean working environment Master : the universal fl exographic press, designed for any substrate in the labels and packaging industry. Snow Ball : the revolution in waste matrix stripping. After 60 years, a movable rewinding shaft increase waste rewinding speeds from 30% up to 200% more than traditional waste fi xed shaft rewinding systems. Digital Flexo : print set-up and production are digitally operated by the press, with digital wastes and quality. Offset Cube : Compact Offset Cube featuring the Mini-Cassette Super-Lean technology. Nuova GIDUE S.r.l. manufactures printing and converting machines for the labels and packaging industry in Florence (Italy). Flower Mini Cassette Snow Ball Mission We provide technologies which are easy to handle and stay robust during the years. We look for the profi tability of Labels and Packaging converters. Quality wins. VS 760 Intelligent Combat Athena Master 630 7
[ Tauruslab.net ] Nuova GIDUE S.r.l. Headquarters Via Cassia 67, 50029 Tavarnuzze (FI) - Italy Tel. +39 055 2374745 Fax +39 055 2020019 Turate Branch (Sales & Services) Via Matteotti 10, 22078 Turate (CO) - Italy Tel. +39 02 9668181 Fax +39 02 96681842 www.gidue.com - e-mail: sales@gidue.com