LB Intelligent Multi-WAN Router

LB Intelligent Multi-WAN Router

Increases WAN reliability and availability Increases Internet Bandwidth Improves availability and response time for external requests to hosted servers Supports VPN resiliency Increases bandwidth for site-to-site network Allows incrementally and flexibly adding WAN Link up to links Grows your distributed network flexibly Reduces bandwidth cost Maintains availability of services for multi-site enterprises Prioritizes and guarantees the minimum bandwidth to mission- critical applications Improves efficiency of bandwidth utilization Prevents individual user from consuming the entire bandwidth resource Prevents network continuity from hardware failure Analyzes traffic usage with inbuilt ViewFlow The Q-Balancer LB keeps your network connectivity always on, helps highly utilize WAN bandwidth, and lets you take full control of WAN connections with its all-in-one and easy-to-manage technology. WAN Failover Q-Balancer assures continuous Internet connectivity for business in every situation by constantly monitoring the status of WAN link and automatically routing traffic down the remaining active links in the event of a link failure. Q-Balancer finds and takes the responsive WAN links, where the network congestion might occur between you and your customers. Improved Availability and Reliability for Hosted Services The outage on Internet connections could cause major issues to the servers hosted internally, which serve incoming requests. Q-Balancer directs external requests to internal servers across the active and least-loaded links. This keeps uninterrupted accessibility to the internal servers.

VPN Resiliency For Site-to-site VPN networks and MPLS networks, Q-Balancer is able to automatically re-route VPN traffic down the remaining active WAN links in few seconds upon link failure detection. Single Site Failure Global Server Load Balancing (GSLB) is useful for its optimal direction of traffic between sites. It is also good at disaster recovery functionality. It assures failover and continuity for data center and multi-site deployment. High Availability Q-Balancer supports an active/passive deployment for a timely backup in the event of hardware failure. In case hardware fault occurs on the active unit, the passive unit will take over right away to ensure the entire network functioning as normal. Outbound Load Balancing Q-Balancer intelligently aggregate multiple Internet connections to speed up the application delivery. Business benefits from greater speed of Internet performance as the best performing and least-loaded links are always selected when requests come up. Inbound Load Balancing By applying Q-Balancer as an authoritative DNS for the domain, the requests from external clients to internal servers are distributed across the active and least-loaded links. ou can direct traffic over the best path without purchasing high-end routers, coordinating with Internet Service Providers, or obtaining specialized staff to run BGP. This eliminates the deployment barriers and reduces cost of using BGP for multihoming networks. Q-Balancer makes the hosted services more responsive. Link Bonding Link Bonding combines multiple Internet connections into a virtual single connection, and therefore allows users to utilize the bonded links like a leased line. This helps business bidirectionally increase the capacity of Internet connection, and provides them greater speed for mission-critical applications. VPN Bonding Large files and applications such as VoIP and Video Conferencing are frequently used between headquarters and branch offices. Therefore, it requires high level of bandwidth capacity. VPN Bonding maximizes the bandwidth capacity by efficiently bonding multiple channels at each location. Our VPN Bonding works on static IP, dynamic IP, and even private IP. It can be integrated into existing VPN networks with minimal impact.

Bandwidth Management The granular control of bandwidth utilization over multiple Internet connections results in an improved client experience, more economical bandwidth consumption, and improved productivity. Multi-Link Data Compression Data Compression increases network capacity up to three times by compressing packets passing WAN links. It brings substantial cost savings immediately to customers by significantly reducing bandwidth consumption without compromising the quality of Internet connections. Minimal Upfront Investment Q-Balancer enables business to add extra WAN Links incrementally as business grows. This helps business minimize the upfront investment, and incrementally increase its bandwidth by aggregating the legacy and newly deployed links. Q-Balancer is capable of aggregating smaller and older lines to improve data transmission without major network addressing changes. Scalability Q-Balancer comes with capacity from 100Mbit/s to 10Gbit/s of throughput, and supports up to WAN Links. All Q-Balancer models are designed for business-grade capacity. All Ethernet ports can be defined as LAN, DMZ or WAN ports. By deploying Q-Balancer, you add upgrade bandwidth capacity as your business grows. Transparent Installation Q-Balancer can be deployed transparently into an existing network to failover and aggregate traffic across the legacy and newly added WAN links. Removing Q-Balancer from a live network can be transparently completed too. Web Caching Web Caching allows business to reduce bandwidth consumption through content caching. Users enjoy faster download speed with frequently-used content cached locally. It helps business avoid wasting money on mindless bandwidth upgrade in order to cope with ever-demanding bandwidth growth. Virtual Appliance Q-Balancer virtual appliances are for easy deployment in large and complex environments. Optimized hardware allocation and reduced hardware expenditure is available since physical computers are able to run multiple instances of the software in parallel by using the underlying VMWare virtualization infrastructure. Thus, it is perfectly applicable for managed services providers and those responsible for the consolidation of several departmental networks. Quota Manager Quota Manager allows administrator to set limit of bandwidth usage and offers plans to optimize bandwidth usage for large organizations such as Education. Assigns per-ip, per-id, and per-wan link quotas. Limits hosts to certain hourly/daily/weekly bandwidth quotas. Tracks and monitors bandwidth usage and bandwidth abusers. Punishes unauthorized network usage attempts by rate-limiting network connections for users that violate acceptable Usage Policies. Supports managing shared and individual quota among users Prevents single user from consuming the entire bandwidth resources Mixture between IPv and IPv Q-Balancer is able to handle routing through IPv and IPv WAN link. For organizations migrating to IPv and still keeping IPv, Q-Balancer provides a cost-effective alternative. ou can host IPv services while providing access to IPv customers and translate between them without burdening the network. USB Cellular Modems Supported The Branch office and Remote office networks can instantly be deployed and connected with Internet access anywhere and anytime by plugging in USB Cellular modems.

MPLS/Leasd Line Replacement The prices of private network services such as leased lines and MPLS are still costly and vary with the distance and capacity. Replacing the expensive dedicated service with VPN by using Q-Balancer to handle VPN tunnels failover and aggregation brings down the cost substantially. For single-site business, Q-Balancer makes low-cost and shared Internet connections perform like leased line at a fraction of the cost. Besides, it makes adding and degrading bandwidth for seasonal requirements quicker and easier. Cost Reduction for Internet The Q-Balancer integrates types of Internet connections from multiple providers, and intelligently balances traffic across all links. Greater speed of Internet performance can be achieved as the best performing and least-loaded links are always selected when requests come up. Hence, business enjoys high speed Internet access at a fraction of the cost of the legacy leased line services. Firewall The inbuilt firewall of Q-Balancer continuously protects business network from unwanted connections by conducting stateful inspection. The setting is based on policy, and can be adopted to business network accordingly. Connection Limit By restricting the number of connections allowed by each individual IP or subnet, the function of Connection Limit minimizes the effect of network intrusions when possible attacks occur. Monitoring, Logging, and Reporting ou can see who and what is using bandwidth resource in real time through the Monitoring mechanism. Logging and Reporting offers visibility into activity within organizations. It records activity on the network, and provides a number of analytical reports in a variety of angles for different needs. With the historical report and real-time information, Q-Balancer lets you accurately plan the bandwidth resources. Centralized Management Centralized Management lowers the cost of operation and management. Managing multiple devices from central office or Network Operation Center can be helpful for administrators. WAN Connectivity Static DHCP Client PPPoE PPTP L2TP USB 3G/G LTE Modems Support LAN Multiple Subnets USB Wireless Gateway DHCP Server/Relay Outbound Load Balancing Failover Persistent Routing Round-Robin by Connection Weighted Round-Robin by Connection Round-Robin by IP Weighted Round-Robin by IP Total Traffic Downlink Uplink Response Redirect to Transparent Proxy Redirect to Proxy Server Farm WRR by Packet TCP Bonding BBLP Inbound Load Balancing Bottleneck Monitor Weighted Least Traffic Round-Robin by Weight Failover Priority Support External DNS Server Multi-Domains Multi-Records Global Server Load Balancing Failover By Location Bandwidth Management WAN Links/Bonding Tunnels Min. & Max. Bandwidth Priority Policy-Based Application IM/P2P FQDN Individual Shared Application Priority Bandwidth Quota IP/Subnet/User ID Individual/Shared Cyclic/Non-cyclic Downlink/Uplink/Total Real-time Statistics Email Notification Block Once Quota is Reached Limit Speed Once Quota is Reached VPN VPN NAT Traversal PPTP Server Recommended PPTP VPN Users L2TP IPSec Server IPSec VPN Encryption (DES, 3DES, AES) Authentication Algorithms (MD5 / SHA- 1) Authentication Methods (Pre-shared key) Perfect Forward Secrecy (D-H Group 1,2,5) IPSec Protocol (ESP / AH) Negotiation Mode (Main mode, Aggressive mode) IKE ID Type (IP, Domain name, Email address) Support Domain Name for Tunnel Endpoints IPSec VPN Real-Time Tunnel Status Dead Peer Detection VPN Resiliency and Bonding Bonding Tunnel Encryption (DES, 3DES, AES) VPN Tunnel Failover VPN Bonding VPN Tunnel Routing Private IP Dynamic IP Authentication Local Radius LDAP AD Networking VLAN MAC Clone IPV/IPV Dual Stack Data Compression Web Cache NAT Server Mapping Static Route RIP v1/v2 & OSPF DHCP Server/Relay DNS Server/Relay DDNS H.323 NAT Traversal Security Stateful Firewall NAT Applications Control IP-MAC Binding DoS Prevention Connection Limit Web Filtering URL Filtering Keyword Filtering Multi-thread Download File-Type Blocking Blocking Content (Java Applets, Java Script, Cookies, Active X, and Proxy) Inbuilt Database Custom block messages Logging and Reporting Status Monitoring by System/Link/LAN Hosts/User Flow/Quota Syslog Support Inbuilt Report Auto-Generated d Email Reports for Multiple Recipients Event Logging Management Email Alert Local Administrator Database Web-based UI (HTTP/HTTPs) Command Line Interface (SSH and Console) Automated Configuration Backup Remote Firmware Upgrade NTP Server Support Built-in Diagnostic Tools SNMP Trap SNMP (v1, v2c, v3) Reliability and Availability High Availability System Auto Recovery

LB300/00 Series LB00 Series LB3000 Series LB5000/000 Series Models Targeting Business Recommended Users WAN Links Support Throughput (Mbps) User Defined Port High Availability Virtual Appliance Centralized Management Hardware Form Factor GbE Ports Gigabit Fiber Ports (SFP) 10 Gigabit Fiber Ports (SFP+) Weight LAN Bypass USB Wireless LAN Gateway Max. Power Consumption Redundant Power Supply LB310 LB10 LB LB20 LB22 LB25 LB30 LB35 LB300 LB3080 LB3120 LB50 LB00 LB5300 LB100 10 100 Desktop ROBO Small Business Mid-Size Business Large Enterprise 50-100 100 Desktop Desktop Desktop 0 200 220 100-500 27 250 27 300 27 350 2.2kgs 7kgs 9.8kgs 21.kgs 0W 8W 270W 300W 00 300-00 800 1200 00 1000-5000+ 2000 3000 10000 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N 2 N N N N N N N N N N N QBALANCER Co., Ltd. Web: www.qbalancer.com Email: sales@qbalancer.com Taiwan Email: sales@qbalancer.com Tel: +88-2-8785512 Fax: +88-2-87855051 Add: F-2, No. 9, Sec. 5, Zhongxiao East Rd., Xinyi Dist., Taipei 1101 United Kingdom Email: uk@qbalancer.com Tel: +-85-5332210 Add: Unit 1, Antler Complex, 1 Bruntcliffe Way, Morley, Leeds LS27 0JG