SERVICE MANUAL SA-VE230/WMS230/ SS-CN230/V230 MICRO SATELLITE SYSTEM. US Model Canadian Model. Ver 1.0 2000.2 SPECIFICATIONS



Similar documents
Kit Watt Audio Amplifier

SERVICE MANUAL POWERED SUBWOOFER

C220 PRELIMINARY TUBE PREAMPLIFIER SERVICE MANUAL. SERIAL NO. WS1001 And Above C220. Serial Number W S1001 And Above CONTENTS

************* OWNER'S MANUAL BAMF800/2 BAMF1250/2 BAMF1800/2 BAMF2200/2 BAMF2600/2 BAMF1200/4 BAMF1600/4 BAMF2000/1D BAMF4000/1D BAMF5500/1D

VOLUME AND TONE CONTROL - PREAMPLIFIER K8084

AC ADAPTOR AC-550CE. MAINTENANCE MANUAL 1st Edition Serial No and Higher

IMPORTANT SAFETY INSTRUCTIONS

LOXONE 12 Channel Amplifier

Features, Benefits, and Operation

User's Guide. True RMS Industrial Multimeter

Group R-70 to R-75: only Vauxhall. Subject. Sound Package. Vehicles. Omega-B (only Saloon) General

Bose Model 1801/1800 Power Amplifier

bba - Balboa Bluetooth Audio (AMP) Installation & User Guide

LM 358 Op Amp. If you have small signals and need a more useful reading we could amplify it using the op amp, this is commonly used in sensors.

MODEL 2202IQ (1991-MSRP $549.00)

A CW QRP Transceiver for 20 m band. How it works I'll describe individually the three boards and the relative tuning devices.

USER MANUAL. 914 Power Amplifier MODEL: P/N: Rev 1

POWERBLOCK - POWER AMPLIFIER

Colour Video Monitors PVM-9045QM/9042QM/9040ME PVM-6041QM

UNDERSTANDING AND CONTROLLING COMMON-MODE EMISSIONS IN HIGH-POWER ELECTRONICS

OWNER'S MANUAL HIGH PERFORMANCE AMPLIFIERS

Build A Video Switcher. Reprinted with permission from Electronics Now Magazine September 1997 issue

400W MONO/STEREO AMPLIFIER

Build a Voltage and Current Peak Detector

Amplifier: AMP Feature Summary

DIGITAL PC SCOPE. Total solder points: 625 Difficulty level: beginner advanced K8031 ILLUSTRATED ASSEMBLY MANUAL

TEMPLE AUDIO BANTAM - 2X15W INTEGRATED CLASS T AMPLIFIER SPECIFICATION 2.0

TOA 900 SERIES II MIXER POWER AMPLIFIER

OPERATING MANUAL PUBLIC ADDRESS POWER AMPLIFIER PA-9336

MCT-7 Multiple Cable Test System

CINEMA SB100 powered soundbar speaker

Brio-Rmanual:Cursamanual.qxd 08/04/ :25 Page1

VOLTAGE/CURRENT CALIBRATOR ISO-TECH ILC-421

Dielectric Withstand and Ground Bond Testers For Production Line Safety Agency Compliance Testing

Physics 3330 Experiment #2 Fall DC techniques, dividers, and bridges R 2 =(1-S)R P R 1 =SR P. R P =10kΩ 10-turn pot.

AI-101DA Integrated Amplifier with USB DAC. Defining the Micro Component, Stunning Audio Performance for the next generation.

PS 29M DUAL CHANNEL BELTPACK IN METAL CASE

AutoRanging Digital MultiMeter

DATA SHEET. TDA1543 Dual 16-bit DAC (economy version) (I 2 S input format) INTEGRATED CIRCUITS

Assembly Instructions: Shortwave Radio Kit

IRT Eurocard. Types DAX-3200

Amplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B)

PC FUNCTION GENERATOR

Kit 27. 1W TDA7052 POWER AMPLIFIER

SECTION 7 - REPAIR/REPLACEMENT PROCEDURES

LT-82 Stationary IR Transmitter


XLS200 MKII. Subwoofer System OWNERS MANUAL

ECEN 1400, Introduction to Analog and Digital Electronics

IRT Eurocard. Type DAX Audio Extractor for 270 Mb/s SDI

Expat Audio Uber Power Supply... 2 Introduction... 2 Revision Control & Edits... 2 The Schematic... 3 Calculating the value of R1,R2 and R3...

HSP GmbH Zum Handwerkerhof Wendelstein Tel / Fax: / Web: HSP@hsshsp.de NTG-3000.

Contents. Safety Warnings... 1

1 All safety instructions, warnings and operating instructions must be read first.

ZMR 80 STEREO MODULAR ZONER USERS MANUAL

POCKET AUDIO GENERATOR K8065

EC4.8. BalancedReferencePreamplifier. Owner smanual ENG

HIGH PERFORMANCE CAR AUDIO MODEL:CR-82 8 CHANNEL ELECTRONIC CROSSOVER NETWORK SYSTEM.

Perseus. Owner s Manual. Vacuum Tube Preamplifier. Rogue Audio, Inc. 3 Marian Lane Brodheadsville, PA Issue date: 02/01/06

To reduce the risk of electrical shocks, fire, and related hazards:

PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.

0.9V Boost Driver PR4403 for White LEDs in Solar Lamps

Contents. Mission Statement...2. Warnings Wire Size...5. Installation Guidelines i-force Inputs...9. Bass Boost Control i-force...

Modifying the Yaesu FT-847 External MHz Reference Input

HP 8970B Option 020. Service Manual Supplement

MONO CHANNEL CLASS "D" AUTOMOTIVE AMPLIFIER G / G / G INSTRUCTION MANUAL

MH Hybrid Subscriber Line Interface Circuit (SLIC) Preliminary Information. Features. Description. Applications. Ordering Information

7 FUNCTION DIGITAL MULTIMETER

To design and build a ported bass cabinet featuring the CF18VJD loudspeaker

Loc-1Tx/Loc-5Tx/Loc-10Tx Data Sheet V3.3

Supplemental to New Product Information (SNPI)

LOW POWER FM TRANSMITTER SYSTEM

SR-M1 Single -Woofer Monitor Speaker SR-M2 Twin -Woofer Monitor Speaker AC-M1 TOA PROFESSIONAL SOUND SYSTEM FLOOR MONITOR SPEAKER SYSTEM

LM386 Low Voltage Audio Power Amplifier

ENCLOSURE DESIGN I S 2008

User Guide. Model Insulation Tester / Megohmmeter

Advanced Monolithic Systems

INSTRUCTION MANUAL. SIGNAL AMPLIFIER 4-20 ma

1993 ACCESSORIES & EQUIPMENT Volkswagen Instrument Panels. Volkswagen; EuroVan, Passat

AP331A XX G - 7. Lead Free G : Green. Packaging (Note 2)

Achat 115MA full-range speaker. user manual

STEREO PREAMPLIFIER INSTRUCTIONS FOR USE

Auto-ranging Digital Multimeter INSTRUCTION MANUAL

TELIKOU Intercom System. MS-500(4+1 channel) Main Station Instruction Manual

Hegel H1 High End Integrated Amplifier

INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT BIT DIFFERENTIAL ADC WITH I2C LTC2485 DESCRIPTION

Routinely DIYers opt to make themselves a passive preamp - just an input selector and a volume control.

Operation Manual for Users

LM1084 5A Low Dropout Positive Regulators

AM/FM/CD/MP3 Receiver with USB/SD & A u xiliary Input 3 Built-in Microphone inputs for P A Announcements. Installation/Operation Manual

LM1036 Dual DC Operated Tone/Volume/Balance Circuit

Fundamentals of Signature Analysis

Essential Electrical Concepts

ASR Emitter I und Emitter I Exclusive

phonostage RIP YOUR VINYL TO BITS, WITH A USB Design

MPA-101. WARNING: Improper installation could result in damage to the amplifier and/or speakers. Read all instructions before installation.

AM/FM Component Stereo Receiver System ( ) Preparation Faxback Doc. # 18708

SLC 500 Analog Input Module

Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver and Amplifier INTRODUCTION

Transcription:

SERVICE MANUAL Ver 1.0 2000.2 SA-VE230/WMS230/ SS-CN230/V230 US Model Canadian Model The SA-VE230 system consists of one unit of SA-WMS230, one unit SS-CN230 and four units of SS-V230. Photo: SA-WMS230 Photo: SS-V230 Photo: SS-CN230 AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION : with 8 Ω loads both channels driven, from 20-150 Hz; rated 50 W per channel minimum RMS power, with no more than 0.8% total harmonic distortion from 250 mw to rated output. SS-V230 Front and rear speakers Speaker system Full range, magnetically shielded Speaker units 5 9 cm (2 3 5 /8 in.), cone type Enclosure type Bass reflex Rated impedance 8 Ω Power handling capacity Maximum input power: 100 W Sensitivity level 86 db (1W, 1m) Frequency range 90 Hz - 20,000 Hz Dimensions (w/h/d) Approx. 70 151 126 mm (2 7 /8 6 5 in.), including front grille Mass Approx. 550 g (1 lb 3 oz) each SS-CN230 Center speaker Speaker system Full range 2, magnetically shielded Speaker units 5 9 cm (2 3 5 /8 in.), cone type Enclosure type Bass reflex Rated impedance 8 Ω Power handling capacity Maximum input power: 120 W Sensitivity level 88 db (1W, 1m) Frequency range 90 Hz - 20,000 Hz Dimensions (w/h/d) Approx. 301 70 126 mm ( 7 /8 2 7 /8 5 in.), including front grille Mass Approx. 1.1 kg (2 lb 7 oz) SPECIFICATIONS SA-WMS230 Subwoofer System Speaker system Active subwoofer, magnetically shielded Speaker unit Woofer : 16 cm (6 3 /8 in.), cone type Enclosure type Advanded SAW type Continuous RMS power output (8 Ω, 20-150 Hz, 0.8 % THD) 50 W Reproduction frequency range 28 Hz - 200 Hz High frequency cut-off frequency 200 Hz Input LINE IN (input pin jack) General Power requirements Power consumptions Dimensions (w/h/d) Mass 120 V AC, 60 Hz 45 W Approx. 205 385 385 mm (8 1 /8 15 1 /4 15 1 /4 in.), including front grille Approx. 10.5 kg (23 lb 2 oz) Supplied accessories Foot pads (20) Audio connecting cords (2 phono to 2 phono) (3) Monaural connecting cord (1 phono to 1 phono) (1) Speaker connecting cords, 10 m (32 ft 9 3 /4 in.) (2) Speaker connecting cords, 2.5 m (8 ft 2 1 /2 in.) (3) Design and specifications are subject to change without notice MICRO SATELLITE SYSTEM

SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: Check the antenna terminals, metal trim, metallized knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. LEAKAGE The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 ma (500 microamperes). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers instructions to use these instruments. ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY. 2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The limit indication is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A) To Exposed Metal Parts on Set 0.15 µf 1.5 kω AC Voltmeter (0.75 V) Earth Ground Fig. A. Using an AC voltmeter to check AC leakage. 2

SECTION 1 DIAGRAMS 1-1. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS IC Block Diagrams Note on Printed Wiring Board: X : parts extracted from the component side. b : Pattern from the side which enables seeing. Indication of transistor. B Q C E These are omitted. Note on Schematic Diagram: All capacitors are in µf unless otherwise noted. pf: µµf 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in Ω and 1 /4 W or less unless otherwise specified. 2 : nonflammable resistor. C : panel designation. Note: The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Note: Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié. U : B+ Line. V : B Line. Voltages are dc with respect to ground under no-signal conditions. Voltages are taken with a VOM (input impedance 10 MΩ). Voltage variations may be noted due to normal production tolerances. Signal path. F : AUDIO IC302 upc1237h OVER LOAD DET OFFSET DET LATCH/ AUTORESET AC OFF DET VCC 1 2 3 4 5 6 7 8 F/F VCC ON MUTE Circuit Boards Location SA-WMS230 POWER board POWER SWITCH board MAIN board LED board CONTROL board 3 3

SA-VE230/WMS230/SS-CN230/V230 1-2. SCHEMATIC DIAGRAM (SA-WMS230) See page 3 for IC block diagrams. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. 4 4

SA-VE230/WMS230/SS-CN230/V230 1-3. PRINTED WIRING BOARD (SA-WMS230) See page 3 for Circuit Boards Location. A B C 1 2 CONTROL BOARD MODE ON : MUSYC OFF: MOVIE POWER SWITCH BOARD POWER 3 4 5 6 7 8 9 10 LEVEL () LED BOARD (POWER) () POWER BOARD () Semiconductor Location Ref. No. Location D101 F- D102 F- D103 G- D104 G- D301 F-8 D302 F-8 D303 F-5 D304 D-8 D501 G-5 D502 G-7 D503 H-7 D801 B-7 IC101 G- IC102 G-9 IC103 E- IC201 B-3 IC302 E-10 IC401 B-10 Q101 G-9 Q102 G-8 Q103 E-10 Q303 D-9 D SP1 (SPEAKER) () E MAIN BOARD F T501 POWER TRANSFORMER G AC IN H R SPEAKER L OUT LINE IN () 5 5

SECTION 2 EXPLODED VIEWS NOTE: -XX, -X mean standardized parts, so they may have some differences from the original one. Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The mechanical parts with no reference number in the exploded views are not supplied. Hardware (# mark) list and accessories and packing materials are given in the last of this parts list. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. 2-2. SA-WMS230 (2) 2-1. SA-WMS230 (1) #7 not supplied #7 supplied with RV201, S201 10 #4 not supplied #3 #3 not supplied @ @ @ 3 5 4 6 7 #3 51 #6 52 53 1 2 8 9 #3 #4 #4 #3 54 not supplied 56 55 #8 T101 #9 #2 SP1 #8 not supplied @ @ @ 12 #2 1 X-4952-542-1 FRAME ASSY, GRILLE 2 X-4952-603-1 PANEL ASSY, FRONT 3 4-973-938-41 KNOB(A), PUSH 4 4-227-298-01 SHEET 5 4-226-228-01 KNOB(VOL) 6 4-226-213-01 INDICATOR 7 1-676-565- LED BOARD 8 1-676-716- POWER SWITCH BOARD 9 A-4428-444-A CONTROL BOARD, COMPLETE 10 A-44-960-A CABINET ASSY, SPEAKER 4-981-864-01 FOOT 12 4-226-227-01 PACKING (D) SP1 1-529-589- SPEAKER (16cm) 51 1-676-714- POWER BOARD 0 52 1-783-820- CORD, POWER * 53 3-703-244-00 BUSHING (2104), CORD 54 4-227-8-31 PANEL, REAR 55 A-4428-443-A MAIN BOARD, COMPLETE * 56 3-701-946-24 LABEL, FUSE RATING 0T101 1-435-334- TRANSFORMER, POWER 6 6 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.

2-3. SS-CN230 103 104 not supplied @ @ @ #5 SP2 101 #1 102 #1 SP3 101 X-4952-574-1 PANEL ASSY, FRONT 102 3-703-564-31 SCREW (3.5) 103 X-4952-575-1 CABINET ASSY, SPEAKER 104 1-694-516- TERMINAL, SPEAKER SP2 1-529-578- SPEAKER (5X9cm) SP3 1-529-578- SPEAKER (5X9cm) 7

2-4. SS-V230 153 #5 not supplied @ @ @ 154 151 SP4 #1 152 151 X-4952-572-1 PANEL ASSY, FRONT 152 3-703-564-31 SCREW (3.5) 153 X-4952-573-1 CABINET ASSY, SPEAKER 154 1-694-516- TERMINAL, SPEAKER SP4 1-529-577- SPEAKER (5X9cm) 8

SECTION 3 ELECTRICAL PARTS LIST CONTROL LED MAIN NOTE: Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. -XX, -X mean standardized parts, so they may have some difference from the original one. Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. CAPACITORS: uf: µf RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable COILS uh: µh Abbreviation CND : Canadian model. When indicating parts by reference number, please include the board name. SEMICONDUCTORS In each case, u: µ, for example: ua...: µa..., upa..., µpa..., upb..., µpb..., upc..., µpc..., upd..., µpd... The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. A-4428-444-A CONTROL BOARD, COMPLETE ************************ < CAPACITOR > C201 1-162-282-31 CERAMIC 100PF 10% 50V C203 1-126-964- ELECT 10uF 20.00% 50V C204 1-126-964- ELECT 10uF 20.00% 50V C205 1-126-964- ELECT 10uF 20.00% 50V C206 1-126-964- ELECT 10uF 20.00% 50V C207 1-130-495-00 MYLAR 0.1uF 5% 50V C208 1-130-495-00 MYLAR 0.1uF 5% 50V < CONNECTOR > * CN201 1-564-5- PLUG, CONNECTOR 8P < RESISTOR > R201 1-249-429- CARBON 10K 5% 1/4W R203 1-249-429- CARBON 10K 5% 1/4W R204 1-249-429- CARBON 10K 5% 1/4W R205 1-249-429- CARBON 10K 5% 1/4W R206 1-249-433- CARBON 22K 5% 1/4W < VARIABLE RESISTOR > RV201 1-225-826- RES, VAR, CARBON 20K (LEVEL) < SWITCH > S201 1-771-632- SWITCH, ROTARY (MODE) 1-676-565- LED BOARD ********** < DIODE > D801 8-719-038-54 DIODE SEL6414E-LC05 (POWER) A-4428-443-A MAIN BOARD, COMPLETE ********************* < CAPACITOR > 0 C1 1-3-924- CERAMIC 0.0047uF 20.00% 250V 0 C2 1-3-924- CERAMIC 0.0047uF 20.00% 250V C101 1-162-286-31 CERAMIC 220PF 10% 50V C102 1-162-286-31 CERAMIC 220PF 10% 50V C103 1-162-286-31 CERAMIC 220PF 10% 50V C104 1-126-964- ELECT 10uF 20.00% 50V C105 1-162-286-31 CERAMIC 220PF 10% 50V C106 1-162-215-31 CERAMIC 47PF 5% 50V C107 1-136-167-00 MYLAR 0.15uF 5.00% 50V C108 1-136-159-00 MYLAR 0.033uF 5.00% 50V C109 1-136-169-00 MYLAR 0.22uF 5.00% 50V C0 1-136-169-00 MYLAR 0.22uF 5.00% 50V C1 1-136-169-00 MYLAR 0.22uF 5.00% 50V C2 1-136-169-00 MYLAR 0.22uF 5.00% 50V C3 1-136-165-00 MYLAR 0.1uF 5.00% 50V C4 1-136-165-00 MYLAR 0.1uF 5.00% 50V C5 1-136-169-00 MYLAR 0.22uF 5.00% 50V C301 1-126-964- ELECT 10uF 20.00% 50V C302 1-136-165-00 MYLAR 0.1uF 5.00% 50V C303 1-126-933- ELECT 100uF 20.00% 16V C304 1-136-165-00 MYLAR 0.1uF 5.00% 50V C305 1-126-964- ELECT 10uF 20.00% 50V C306 1-126-933- ELECT 100uF 20.00% 16V C307 1-126-963- ELECT 4.7uF 20.00% 50V C308 1-104-664- ELECT 47uF 20.00% 25V C501 1-136-165-00 MYLAR 0.1uF 5.00% 50V C502 1-136-165-00 MYLAR 0.1uF 5.00% 50V C503 1-9-940-51 ELECT 4700uF 20.00% 50V C504 1-9-940-51 ELECT 4700uF 20.00% 50V C505 1-126-933- ELECT 100uF 20.00% 16V C506 1-126-933- ELECT 100uF 20.00% 16V C507 1-126-964- ELECT 10uF 20.00% 50V C508 1-126-964- ELECT 10uF 20.00% 50V C509 1-136-165-00 MYLAR 0.1uF 5.00% 50V C510 1-136-165-00 MYLAR 0.1uF 5.00% 50V C5 1-136-165-00 MYLAR 0.1uF 5.00% 50V C512 1-136-165-00 MYLAR 0.1uF 5.00% 50V < CONNECTOR > * CN101 1-564-5- PLUG, CONNECTOR 8P * CN301 1-564-510- PLUG, CONNECTOR 7P * CN302 1-565-792- PIN, CONNECTOR 2P * CN501 1-580-230- PIN, CONNECTOR (PC BOARD) 2P * CN502 1-564-687- PIN, CONNECTOR 3P * CN801 1-564-505- PLUG, CONNECTOR 2P < DIODE > D101 8-719-991-33 DIODE 1SS133T-77 D102 8-719-991-33 DIODE 1SS133T-77 D103 8-719-991-33 DIODE 1SS133T-77 D104 8-719-991-33 DIODE 1SS133T-77 D301 8-719-991-33 DIODE 1SS133T-77 9

MAIN POWER D302 8-719-991-33 DIODE 1SS133T-77 D303 8-719-991-33 DIODE 1SS133T-77 D501 8-719-025-03 DIODE RBA-402 D503 8-719-933-84 DIODE UZL-15M < FUSE > 0F501 1-533-418- FUSE, GLASS CYLINDRICAL(DIA.5) 1.25A/125V < IC > IC101 8-759-634-50 IC M5218AL IC102 8-759-634-50 IC M5218AL IC103 8-759-634-50 IC M5218AL IC201 8-759-634-50 IC M5218AL IC302 8-759-1-68 IC upc1237ha < JACK > J101 1-785-795- JACK, PIN 2P (LINE) < TRANSISTOR > Q101 8-729-178-55 TRANSISTOR 2SC2785-E Q102 8-729-178-55 TRANSISTOR 2SC2785-E Q103 8-729-178-55 TRANSISTOR 2SC2785-E Q303 8-729-029-66 TRANSISTOR DTC4ES R131 1-249-441- CARBON 100K 5% 1/4W R132 1-249-429- CARBON 10K 5% 1/4W R133 1-249-429- CARBON 10K 5% 1/4W R301 1-249-427- CARBON 6.8K 5% 1/4W F R302 1-249-433- CARBON 22K 5% 1/4W R303 1-249-433- CARBON 22K 5% 1/4W R304 1-249-412- CARBON 390 5% 1/4W F R305 1-212-857-00 FUSIBLE 10 5% 1/4W R306 1-249-429- CARBON 10K 5% 1/4W R307 1-249-429- CARBON 10K 5% 1/4W R309 1-249-441- CARBON 100K 5% 1/4W R310 1-249-441- CARBON 100K 5% 1/4W R3 1-249-427- CARBON 6.8K 5% 1/4W F R312 1-249-429- CARBON 10K 5% 1/4W R313 1-216-455- METAL OXIDE 560 5% 2W R314 1-249-439- CARBON 68K 5% 1/4W R315 1-249-430- CARBON 12K 5% 1/4W R316 1-215-868-00 METAL OXIDE 680 5% 1W R501 1-216-456-00 METAL OXIDE 820 5% 2W R502 1-216-456-00 METAL OXIDE 820 5% 2W < RELAY > RY301 1-515-920- RELAY (24V) < RESISTOR > R101 1-249-425- CARBON 4.7K 5% 1/4W F R102 1-249-425- CARBON 4.7K 5% 1/4W F R103 1-249-437- CARBON 47K 5% 1/4W R104 1-249-437- CARBON 47K 5% 1/4W R105 1-249-429- CARBON 10K 5% 1/4W R106 1-249-429- CARBON 10K 5% 1/4W R107 1-249-429- CARBON 10K 5% 1/4W R108 1-249-429- CARBON 10K 5% 1/4W R109 1-249-417- CARBON 1K 5% 1/4W F R0 1-249-417- CARBON 1K 5% 1/4W F R1 1-249-429- CARBON 10K 5% 1/4W R2 1-249-417- CARBON 1K 5% 1/4W F R3 1-249-417- CARBON 1K 5% 1/4W F R4 1-249-441- CARBON 100K 5% 1/4W R5 1-249-429- CARBON 10K 5% 1/4W R6 1-247-843- CARBON 3.3K 5% 1/4W R7 1-249-424- CARBON 3.9K 5% 1/4W F R8 1-249-436- CARBON 39K 5% 1/4W R9 1-249-417- CARBON 1K 5% 1/4W F R120 1-249-435- CARBON 33K 5% 1/4W R121 1-249-425- CARBON 4.7K 5% 1/4W F R122 1-249-439- CARBON 68K 5% 1/4W R123 1-249-417- CARBON 1K 5% 1/4W F R124 1-249-435- CARBON 33K 5% 1/4W R125 1-249-425- CARBON 4.7K 5% 1/4W F < TRANSFORMER > 0 T501 1-435-334- TRANSFORMER, POWER < TERMINAL > TM101 1-537-922- TERMINAL BOARD (SP) (SPEAKER) 1-676-714- POWER BOARD ********** < CAPACITOR > C401 1-126-965- ELECT 22uF 20.00% 50V < CONNECTOR > * CN401 1-564-510- PLUG, CONNECTOR 7P < IC > IC401 8-759-660-72 IC TDA7294 < RESISTOR > R401 1-249-429- CARBON 10K 5% 1/4W R402 1-249-429- CARBON 10K 5% 1/4W R126 1-249-435- CARBON 33K 5% 1/4W R127 1-249-440- CARBON 82K 5% 1/4W R128 1-249-424- CARBON 3.9K 5% 1/4W F R129 1-249-427- CARBON 6.8K 5% 1/4W F R130 1-249-427- CARBON 6.8K 5% 1/4W F 10 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.

POWER SWITCH 1-676-716- POWER SWITCH BOARD ******************** ACCESSORIES & PACKING MATERIALS ******************************* < CONNECTOR > CN1 1-564-321-00 PIN, CONNECTOR 2P < SWITCH > 0 S1 1-554-920- SWITCH, PUSH (AC POWER)(1 KEY)(POWER) MISCELLANEOUS ************** 0 52 1-783-820- CORD, POWER 104 1-694-516- TERMINAL, SPEAKER 154 1-694-516- TERMINAL, SPEAKER SP1 1-529-589- SPEAKER (16cm) SP2 1-529-578- SPEAKER (5X9cm) SP3 1-529-578- SPEAKER (5X9cm) SP4 1-529-577- SPEAKER (5X9cm) 0 T101 1-435-334- TRANSFORMER, POWER 1-558-271- CORD, CONNECTION 1-769-329-21 CORD, CONNECTION (PIN-PIN) 1-769-433- CORD, SPEAKER 4-226-572- MANUAL, INSTRUCTION (ENGLISH)(US) 4-226-572-21 MANUAL, INSTRUCTION (ENGLISH/FRENCH)(CND) 4-972-322-01 FOOT (Y) ************** HARDWARE LIST ************** #1 7-621-846-40 SCREW (M4X16), TAPPING #2 7-685-165-01 SCREW +PTP 4X25 TYPE1 #3 7-685-647-79 SCREW +P 3X10 TYPE2 NON-SLIT #4 7-685-648-79 SCREW +P 3X12 TYPE2 NON-SLIT #5 7-685-659-79 SCREW +BVTP 4X8 TYPE2 IT-3 #6 7-685-660-19 SCREW +BVTP 4X10 TYPE2 N-S #7 7-685-663-79 SCREW +BVTP 4X16 TYPE2 N-S #8 7-685-664-79 SCREW +PTP 4X20 TYPE1 #9 7-685-665-79 SCREW +BVTP 4X25 TYPE2 N-S The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.

SA-VE230/WMS230/SS-CN230/V230 9-929-074-12 Sony Corporation Home Audio Division Company 2000B1620-1D Printed in Japan 2000.2 Published by Quality Assurance Dept.