5) Fold back along Template 1: Test Helicopter Follow the steps below 2) Cut from the to the dotted line 3) Fold forwards 3) Fold 4) Cut along these two lines, stopping 6) Fold up here 1
Template 2: Rotor (r) = Tail (L) = or 60mm 2) Rotor reduce the rotor for 40mm 3) Cut from the to the dotted line 4) Fold forwards 4) Fold tail line taking care not Apply a paperclip to the tail if your 5) Cut along this solid line if you want to reduce the tail (L) to 5) Tail L= L=60mm 2
Template 2: Rotor (r) = Tail (L) = or 60mm 2) Rotor reduce the rotor for 40mm 3) Cut from the to the dotted line 4) Fold forwards 4) Fold tail line taking care not Apply a paperclip to the tail if your 5) Cut along this solid line if you want to reduce the tail (L) to 5) Tail L= L=60mm 3
Template 2: Rotor (r) = Tail (L) = or 60mm 2) Rotor reduce the rotor for 40mm 3) Cut from the to the dotted line 4) Fold forwards 4) Fold tail line taking care not Apply a paperclip to the tail if your 5) Cut along this solid line if you want to reduce the tail (L) to 5) Tail L= L=60mm 4
Template 2: Rotor (r) = Tail (L) = or 60mm 2) Rotor reduce the rotor for 40mm 3) Cut from the to the dotted line 4) Fold forwards 4) Fold tail line taking care not Apply a paperclip to the tail if your 5) Cut along this solid line if you want to reduce the tail (L) to 5) Tail L= L=60mm 5
Template 2: Rotor (r) = Tail (L) = or 60mm 2) Rotor reduce the rotor for 40mm 3) Cut from the to the dotted line 4) Fold forwards 4) Fold tail line taking care not Apply a paperclip to the tail if your 5) Cut along this solid line if you want to reduce the tail (L) to 5) Tail L= L=60mm 6
Template 3: Rotor (r) = Tail (L) = or 60mm 2) Rotor reduce the rotor for 60mm 3) Cut from the top this to the dotted line 4) Fold forwards 4) Fold tail line, taking care not Apply a paperclip to the tail if your 5) Cut along this solid line if you want to reduce the tail (L) to 5) Tail L= L=60mm 7
Template 3: Rotor (r) = Tail (L) = or 60mm 2) Rotor reduce the rotor for 60mm 3) Cut from the top this to the dotted line 4) Fold forwards 4) Fold tail line, taking care not Apply a paperclip to the tail if your 5) Cut along this solid line if you want to reduce the tail (L) to 5) Tail L= L=60mm 8
Template 3: Rotor (r) = Tail (L) = or 60mm 2) Rotor reduce the rotor for 60mm 3) Cut from the top this to the dotted line 4) Fold forwards 4) Fold tail line, taking care not Apply a paperclip to the tail if your 5) Cut along this solid line if you want to reduce the tail (L) to 5) Tail L= L=60mm 9
Template 3: Rotor (r) = Tail (L) = or 60mm 2) Rotor reduce the rotor for 60mm 3) Cut from the top this to the dotted line 4) Fold forwards 4) Fold tail line, taking care not Apply a paperclip to the tail if your 5) Cut along this solid line if you want to reduce the tail (L) to 5) Tail L= L=60mm 10