Job Hazard/Safety Analysis For the Office Worker

Similar documents
Job Hazard/Safety Analysis For the Housekeeper

Job Hazard/Safety Analysis For the Paint & Finish Worker

Job Hazard/Safety Analysis For the Lab Worker

Tech Shop Safety Level 2 - FN Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258)

Job Hazard/Safety Analysis For the Grounds Keeper

Job Hazard/Safety Analysis For the Building Maintenance Worker

HEALTH AND SAFETY REDUCING ACCIDENTS IN KITCHENS

Job Hazard/Safety Analysis For the Plumber

Dining Services OSHA Safety Training Program TRAINING RECORD

Safety in Offices and other General Areas

Union County Public Schools. Facilities Department. Electrical. Safe Work Practices

Welcome to the Retail Module.

ERGONOMICS. Improve your ergonomic intelligence by avoiding these issues: Awkward postures Repetitive tasks Forceful exertions Lifting heavy objects

School of Engineering University of Glasgow

Rutherford County Workplace Injuries and Safety

HealthandSafetyOntario.ca. Hazards. Introduction. Legislation

Preventing Overuse Injuries at Work

SAFETY SELF-INSPECTION PROGRAM

Office Safety Awareness

Machine/Woodworking Shop The Basic Rules

Workplace Job Accommodations Solutions for Effective Return to Work

Injury Prevention for the Transportation and Warehouse Industry

3053 Electrical Safety Training Program Course Outline

Extension Cord Safety Policy

How To Prevent A Slip, Trip And Fall

7. PRINCIPAL STEPS 8. POTENTIAL HAZARDS 9. RECOMMENDED CONTROLS

Responsibilities of a Volunteer Leader

Notes. Material 1. Tools the employee is expected to operate

Developing a better you. Heavy Lifting and Injury Prevention

INCIDENT/ACCIDENT/INJURY REPORTING AND INVESTIGATION

Electrical Wiring Methods, Components and Equipment for General Use. Approved for Public Release; Further Dissemination Unlimited

Injury Prevention in Restaurants and Kitchens

Abrasive Wheel Grinder Safety

Tools for Orienting Worksite Supervisors About Teen Health and Safety

Preventing Falls, Slips and Trips

Company Name Company Address Company Phone Number Company Fax Number

Safety Inspections and Sample Safety Inspection Checklists

E3902 Seeing Accidents Before They Happen Leader s Guide

University of Glasgow School of Engineering UGRacing Formula Student Garage

Forklift Carts and Dollies

Installation Instructions for Alarm Module Kit A043F059

Tips for Eliminating and Controlling MSD Hazards

MANCON Human Resources Workers Compensation or ext 312 or

2 electrical. electrical PulteGroup, Inc. All Rights Reserved.

Injury Prevention for the Construction Industry

Curtain Guards Made of PVC and designed to protect the operator from the risk of airborne chips or tool fragments.

Job Hazard Analysis. Job Hazard Analysis, Incident Investigation, and Training. Job Hazard Analysis

HAZARD IDENTIFICATION AND RISK ASSESSMENT PROCEDURES FOR DEEP SOUTH CRANE & RIGGING

Activity Hazard Analysis (AHA)

Back Safety and Lifting

REFRIGERATION & AIR CONDITIONING

Sample Written Program. For. Job Safety Analysis

Safety Rules. Miscellaneous Retail Stores

IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER.

Preventing Slips, Trips and Falls. Presented by: Mark Hargett

Safety Rules. Car Washes CORPORATE HEADQUARTERS 518 EAST BROAD STREET COLUMBUS, OHIO STATEAUTO.COM

Slips, Trips and Falls

Master Workplace Inspection Checklist for General Shop Safety. MASTER WORKPLACE INSPECTION CHECKLIST General Shop Safety

Hazard/Risk Identification and Control Procedure

MSD Hazards & Solutions FORCE

Safe Operating Procedure

Preventing Slips, Trips, & Falls

Training Needs Assessments Chart. Index of Training Requirements Job Description: or Employee:

Welcome to the Hairdressing Module

Cable Drum Machine. Operation Manual BC260 SERIES. Cleans 1 1/4" to 3" lines up to 50'

How To Protect Your Shop From Tripping Hazards

TEMPORARY EMPLOYEES SAFETY PROCEDURES

HOUSING QUALITY STANDARDS (HQS)

Virtual Office Agreement

Activity risk assessment Assessment title: New Generic Office environment

Policies and Procedures Issue Date (NAME) SAFE WORK PRACTICES Rev. Date

Workers Compensation HR, JE, 12/10/12

in the United States Home fires are a major problem Older Homes Pose an Even Greater Threat Put it into perspective: Electrocutions can be Prevented

Slips, Trips, and Falls

IMPORTANT SAFETY RULES TO FOLLOW

Electrical Safety Plugs What are the different types of plugs? Extension Cords What are some potential hazards involving extension cords?

Slips, trips, falls and ladder safety

Example risk assessment for a motor vehicle mechanical repair workshop

GET A GRIP TO AVOID INJURIES

MANUAL HANDLING POLICY

Citations in brackets are from Title 8 of the California Administrative Code.

Working Safely In Restaurants

Preventing Slips, Trips & Falls. Gary A. Higbee EMBA CSP

Machine and Power Tool Safety Checklist. Version 1.0 June Chestnut Street, Suite 400, Philadelphia, PA

FIRE SAFETY ONLINE TRAINING

Working as a cashier. HealthandSafetyOntario.ca. Hazard: Poor Workstation Layout

[Type text] What is the probability of an accident happening? Task, activity or environment being assessed

Management Tools to Prevent Material Handling Low Back Injuries

Job Hazard Analysis Manual. Updated 10/6/04

MODEL T-4 TRENCHER. Operators Manual

You ve. life. ahead. you... So, safe. the of. job!

SAFETY PROGRAM. For CONSTRUCTION

Transcription:

Job Hazard/Safety Analysis For the Office Worker 1

INTRODUCTION Job Hazard/Safety Analysis for the Office Worker is a partial list of known task performed by the professional office worker. We have placed task in alphabetical order and in a table format, listing each in a step-by-step sequence followed by the potential hazard and a recommended action or procedure. This is by no means an exhaustive list and is subject to modification. Additional comments may be added as more information becomes available. If you are asked to perform an occasional task, not listed with your job title, you can look up an individual task by returning to our Job Safety Analysis page and check the pulldown menu for Job Task. 2

APHABETICAL LIST OF TASK Page Office Work 4 Portable Heater_Electric Powered 5 Lifting & Carrying 6 Paper Shear 7 Paper Shredder 8 3

Hazard Analysis: Office/Computer Work Office Work Office Work Back Strain, Eye Strain, Repetitive Motion Injury Physical Injury and/or Trauma Repeated motions performed in the course of normal work or daily activities. Slips, Trips and Falls, Struck by Falling Objects Office Work Electric Shock Circuit overload, frayed or damaged service and extension cords, faulty equipment Handling / Moving Heavy Items And Equipment Physical Injury and/or Trauma Heavy lifting, awkward motions, repetitive motions. Change work activity often to interrupt repetitions activity or motion. Avoid excessive unnatural or awkward motions such as twisting the arm or wrist and overexertion. Make a conscious effort to avoid incorrect posture. Practice Good Housekeeping i.e., keep floors clear of debris and liquid spills. Do not block or restrict doorways, halls, closets or paths of egress. Do not stand on chairs, use foot stool or ladder. Open only one file drawer at a time and secure cabinet to the wall if feasible. Never overload shelves and stack evenly to avoid tipping. Never use extension cords in place of permanent wiring. If a cord must be used make sure it is properly sized for the voltage and amperage of the equipment. Avoid unnecessary use of adapters and multi-outlet strips. Do not run power cords through door openings or under chairs were it may be walked on or pinched. mechanical means to lift and move heavy items, use push carts and dolly. Always employ proper lifting techniques and get help with loads that cannot be safely lifted by one person. Wear hand and foot protection to safeguard against crushing and pinching injuries. PPE Required: Optional Gloves Metatarsal & Toe Guards 4

Hazard Analysis: Portable Heater, Electric Powered Trauma Burns Situational awareness, PPE, protective clothing Foot Injury Roll over foot, drop object on foot Position on level flat surface away from accidental bumping or tripping Fire Heat, sparks, slag Appropriate placed fire extinguisher, remove all combustibles and fire hazards from area Electrical Shock Improper operations and maintenance, improper switching device Strictly follow manufacturer s instructions, proper switching for starting up/ shutting down machine PPE Required: 5

Hazard Analysis: Lifting/Carrying Objects Trauma Impact Situational Awareness, Gloves, Foot Injury Dropped object on foot Metatarsal & Toe Guards PPE Required: Optional Metatarsal & Toe Guards Gloves 6

Hazard Analysis: Paper Shear Hand /Finger Injury Shearing Blade Impact, penetration, compression Situational Awareness, Regular maintenance, Industry approved guards and clamps Foot Injury Drop object on foot For set-up and operation strictly followed manufacturer s instructions PPE Required: 7

Hazard Analysis: Paper Shredder lacerations to the fingers Operator inattention or error Never allow children to operate paper shredders, even under adult supervision. Never put fingers or objects other than paper (like paper clips or staples) into the shredder feed opening. Scalp Trauma Hair, jewelry, loose clothing caught in feeder Keep jewelry, long hair, ties, lanyards, etc. away from the paper shredder feed opening. Feed paper smoothly into the shredder, not forcing the paper in. PPE Required: 8