Atlantic Maintenance Services Atlantic Maintenance Services Ltd. (AMS) specializes in the application of corrosion protective coatings, passive fire protection, composite repair, blast protection and acoustic and thermal insulation for new and existing industrial facilities in Newfoundland and Labrador. AMS works closely with suppliers to identify the most cost effective long-term solutions. We assure our quality workmanship through regular inspection by certified quality specialists. Safety is a priority for AMS. Following inclusive safety policies and standards set forth in a robust HSEQ program, AMS is committed to providing regular workplace inspections, hazard assessments and safe work policies and procedures. Our Operation Our portfolio includes a complete suite of services: Composite Repairs Specialized Cleaning Passive Fire Protection Systems Protective Coatings and Corrosion Barrier Systems Industrial Insulation Project Management Alternative Access Services The AMS Approach Working with our suppliers to identify the most cost-effective and long-term solutions for our clients Bringing years of experience in superior service delivery and innovation Focusing on our commitment to Health, Safety, Environment and Quality Building mutually beneficial relationships The AMS Difference A single point of contact for all job requirements Specializing in pipe, tank and casting repairs avoiding unnecessary replacement costs In-house NACE certified Coatings Quality Inspectors Access to IRATA certified Rope Access Trade Specialists Superior Paint and Blast facility
Maintenance Facility Come by Chance, NL The AMS Maintenance Facility, near Come by Chance, NL, is strategically located in close proximity to many major projects; including the Bull Arm site, Long Harbour and Argentia. This facility has direct access to the Trans-Canada Highway with in-house warehousing and logistics support available. This 10,000 square foot facility with three acres of laydown area has a flow-through design and is fully appointed for industrial corrosion protective coatings, composite repairs to tanks, pipe, castings and vessels, as well as passive fire protection services. Operators are certified to complete Ultra High Pressure (UHP) Water Jetting services. The facility has incorporated the latest in blast media recycling systems, environmental control systems and dehumidification systems for the assurance of quality blasting and painting operations. Strategically located near Come by Chance, NL, the AMS Maintenance Facility is close to many major project sites; including Bull Arm, Long Harbour and Argentia. The facility has in-house warehousing and logistics support available, with direct access to the Trans-Canada highway.
Composite Repairs Atlantic Maintenance Services is a certified applicator of Belzona products in Newfoundland and Labrador. AMS employs a team of trained applicators that are certified in the application of pipe, vessel and casting repairs. Typical applications cover all aspects of pipe configurations including complex geometries, profiles, flanges and vessels, as well as shaft repair and tank linings. AMS specializes in the reinstatement of structural components using engineered solutions. Applied composite materials can be utilized in many situations where replacement of the original structure or the member is not convenient. Applications include: Metal Repair Erosion / Corrosion Protection Rubber Repair and Protection Abrasion Resistant Linings Cavitation / Erosion repair High Temperature Coatings Corrosion Protection Concrete Protection Concrete Repair Re-facing Pipe and vessel repairs can be engineered to comply with ISO and ASME standards for integrity reinstatement and can carry a guarantee of up to 20 years.
Specialized Cleaning Water jetting (blasting) is an effective and environmentally sound solution when traditional surface preparation techniques are not practical. The Ultra High Pressure (UHP) fresh water system is effective in removing all industrial coatings, corrosion and contaminants. Our high (5-25,000 PSI) and ultra-high (up to 40,000 PSI) water jetting units are diesel driven, have certified exhaust scrubbers and are trailer mounted for easy access to most industrial environments. Typical applications include: Internal cleaning of pipes, tanks Removal of surface corrosion by-products Surface contaminant removal Removal of heavy coatings Exposing of reinforcement bars in concrete structures All UHP operators are trained and certified by third party providers. Passive Fire Protection Systems Atlantic Maintenance Services provides Passive Fire Protection services in new build, retrofit and maintenance situations for onshore and offshore industrial applications. We are best positioned to provide technical guidance on the materials and systems suited to the project needs through the design, build, commissioning and operating phases of an asset. AMS is approved to supply, install and commission major passive fire protection systems. Our experienced fire protection team provides specifically designed and engineered fire protection systems to meet operational requirements. These systems have been tested and approved to international fire and blast standards such as Lloyd s Register, DNV, CSA and NFPA. Our passive fire protection scope of services includes: Material evaluation Installation, management and execution Condition surveys Systems provided include: Wet-applied and precast epoxy intumescents Cementitious fire protection products Blast rated firewall design, fabrication and installation
Protective Coatings and Corrosion Barrier Systems Atlantic Maintenance Services has substantial experience in working with and applying Protective Coatings and Corrosion Barrier Systems to materials that are exposed to both the onshore and harsh North Atlantic offshore environments. Together with our suppliers we are well positioned to provide the appropriate advice and service to fit our clients needs.
With our coatings suppliers, we specify coating solutions that meet clients business needs and environmental considerations. We apply client approved Protective Coating Systems that provide superb corrosion control at great value. We have well-established relationships with the major coatings manufacturers, allowing us to keep abreast of current industry best-practices. AMS coating capability includes: Experienced supervision and personnel Specification development and technical support Scope identification and work scope development Condition Survey and reporting Level 2 and Level 3 NACE inspectors Planning, budgeting and progress control / monitoring Risk-based coatings management
Alternative Access Services Atlantic Maintenance Services has access to IRATA certified Industrial Rope Access Technicians through its affiliated companies. Industrial Rope Access is a proven method of achieving a safe work position at height or in areas of difficult access. An associated company, Crosbie Salamis Limited, is an Operational and Training Member of the International Industrial Rope Access Trade Association (IRATA International). IRATA is the sole global trade association in the work-at-height sector with member companies on every continent. Industrial rope access has been developed by IRATA and is the chosen means of access for much of the work in the offshore Oil & Gas industry. Its success is based on thorough training and strict work guidelines that deliver an unrivalled safe working record year after year. Alternative Access Services include: A team of experienced technicians (all levels) who provide a range of maintenance, construction and repair services Rope access support for inspection services Equipment that conforms to the highest possible global standards. All equipment is regularly inspected and maintained. Operational and Training work that is conducted in line with the Association Code of Practice in the particular location For additional information please visit www.irata.org
Industrial Insulation Atlantic Maintenance Services has extensive experience in the provision of Industrial Insulation (hot & cold) applications, as an integral part of the multi-discipline services we provide to our clients. Our specialists provide technical expertise to all projects, offering assistance and solutions during the design phase to implementation. We have experience with a broad range of materials and systems. AMS works closely with our insulation product suppliers, forming close alliances and enabling all parties to jointly focus on products that are efficient, safe and cost effective to apply. Our scope of services include: Specification development assistance and technical support Thermal and acoustic insulation, including purpose designed high efficiency modular and applied systems Provision of plant, equipment and materials to carry out the full scope of work Sheet metal and composite cladding solutions Custom made reusable insulation jackets Trained and competent tradespersons Installation, management and supervision Project Management We recognize that project management expertise is fundamental to the success of a profitable, adaptable, proactive and forward-thinking organization. Members of our team are certified with a Master s Certificate in Project Management, ensuring that our team is skilled in all aspects of our operations and are mindful of our client s profitability and business objectives. Our management philosophy has been developed to offer a flexible and cost-effective service, tailored to meet our client s needs. The commercial framework can vary from time and material, fixed lump sum, to managed and performance-related contracts. AMS offers a turnkey service capability that includes: Specialist engineering support Discipline supervision Innovative techniques and technical support Creating of work packages - cost time resource schedules Planned maintenance programs Material and equipment management Planning and progress control/monitoring Budgeting, reporting and cost control Work scope execution
HSEQ The successful management of Health, Safety, the Environment and Quality is a top priority for Atlantic Maintenance Services. AMS is COR (Certificate of Recognition) certified through the Newfoundland and Labrador Construction Safety Association (NLCSA). Our Health, Safety, Environment and Quality Management Systems (HSEQ) are established, developed and documented to operate in accordance with the guidelines set out in the COR guidelines and are also tailored to follow the ISO 9001-2008 and 18001 Standards for Quality Management and OH&S Management. Policies and procedures affecting the management of these issues are considered living documents within AMS and are subject to continuous review, based on changes in legislative requirements and best practices. We ensure that these guidelines are implemented throughout our operation, from decision-making at senior management level to our field operations. Commitment is reinforced across the entire organization by having an effective operational system in place, regular audits and reviews, plus training and communications for all employees. Tear here. Take card. Atlantic Mainenance Services contact: Cec Cooper Vice President - Onshore Operations Atlantic Maintenance Services is a wholly owned subsidiary of the Crosbie Group Limited. www.crosbiegroup.com Tel: 709-726-8177 Cell: 709-727-9918 Fax: 709-726-6268 ccooper@crosbiegroup.com 1 Crosbie Place Suite 201 St. John s, NL P.O. Box 398 St. John s, NL A1C 5J9 Take card. Tear here.
Crosbie Group Limited The Crosbie family s involvement in Newfoundland and Labrador business began in 1858 with the arrival of George Crosbie to Brigus. In 1884 George moved to St. John s and the family business has been headquartered there ever since. His son John, subsequently Sir John, expanded into many diverse ventures and founded Crosbie and Company Limited at the turn of the century. Sir John Crosbie s legacy of entrepreneurship, public service and philanthropy has set the standard for three successive generations of the family. The Crosbie Group Limited is now in its 4th generation as a family business and has sustained the spirit of the company s last 100 plus years by continuing its involvement in industries that have been at the core of its success, while branching into the emerging and evolving sectors that the province has come to offer. Currently the Group s interests are concentrated in the following four principle areas: Onshore industrial Offshore Oil & Gas Real estate Construction www.crosbiegroup.com Having lived and worked in our current location on Crosbie Place off Crosbie Road for many decades, the Crosbie Group Limited family is excited about the pending move to new corporate headquarters situated on Hebron Way. The planned move-in date is for Summer 2015. Above is an artist s rendition of what our new HQ building is expected to look like.
Cec Cooper Vice President - Onshore Operations Tel: (709) 726-8177 Cell: (709) 727-9918 Fax: (709) 726-6268 ccooper@crosbiegroup.com 1 Crosbie Place Suite 201 St. John s, NL Canada P.O. Box 398 St. John s, NL Canada A1C 5J9 Atlantic Maintenance Services is a wholly owned subsidiary of the Crosbie Group Limited. www.crosbiegroup.com