PERSONAL DATA Name: Yuri Ivan Maggi Date of birth: August, 1st 1975 Nationality: Brazilian yuri@exeengenharia.com DEGREES Ph.D.: Civil Engineering Department of Structures - São Carlos School of Engineering University of São Paulo 2004 MS: Civil Engineering Department of Structures - São Carlos School of Engineering University of São Paulo 2000 BS: Civil Engineering - Federal University of Paraná Curitiba Brazil - 1997 LANGUAGE SKILLS Portuguese English Spanish PUBLISHED ARTICLES & PROCEEDINGS MAGGI, Yuri Ivan; SABINO, Rubens; SABINO, Leandro. Projects on maritime works using steel: technologies applied to construction (in portuguese). In: Construmetal Conference on Steel Construction, São Paulo, Brazil, 2008. DESTRO, Talita Sgobi ; MAGGI, Yuri Ivan. Analysis of the behavior of slip-joint connections on telecom structures (in portuguese). In: XXII CRICTE Conference on Scientific and Technological Research in Engineering, Passo Fundo, Brazil, 2007. MAGGI, Yuri Ivan ; MAGGI, Patrícia Lizi de Oliveira. Proposal for integration between classes for Materials, Construction methods and Applied Calculus (in portuguese). In: COBENGE 2007 - XXXV Brazilian Conference on Engineering Education, Curitiba, Brazil, 2007. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; TRISTÃO, Gustavo Alves ; CALADO, Luís. Advanced Issues on the Parametrical Modeling for Yielding Line Analysis of Bolted Connections. In: International Colloquium on Stability and Ductility of Steel Structures, 2006, Lisboa, 2006. DESTRO, Talita Sgobi ; MAGGI, Yuri Ivan. Analysis of the behavior of emergency latticed structures used for transmission lines (in portuguese). In: XXI CRICTE Conference on Scientific and Technological Research in Engineering, Ijuí, Brazil, 2006. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; LEON, Roberto T ; RIBEIRO, Luiz Fernando Loureiro. Parametric analysis of steel bolted end-plate connections using finite element modeling. Journal of Constructional Steel Research, EUA, v. 61, n. 5, p. 689-708, 2005. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins. Analysis of the behavior of beam-to-column bolted extended end-plate connections using finite element models (in portuguese). Cadernos de Engenharia de Estruturas, v. 7, p. 21-52, 2005.
MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; TRISTÃO, Gustavo Alves. Experimental and numerical behavior of bolted T-stubs applied for design of extended end plate connections. In: EUROSTEEL 2005-4th European Conference on Steel and Composite Structures, 2005, Maastricht, 2005. TRISTÃO, Gustavo Alves ; GONÇALVES, Roberto Martins ; MAGGI, Yuri Ivan ; MUNAIAR NETO, Jorge. Beam-tocolumn connections numerical modelling. In: EUROSTEEL 2005-4th European Conference on Steel and Composite Structures, 2005, Maastricht, 2005. MAGGI, Yuri Ivan ; ULSENHEIMER, Marcelo ; FERREIRA NETO, Pedro Nozor. Fabrication of concrete blocks using tire and polyurethane leavings (in portuguese). In: XX CRICTE - Conference on Scientific and Technological Research in Engineering, Foz do Iguaçu, Brazil, 2005. MAGGI, Yuri Ivan ; COSTA, Guilherme Bastian ; TETTO, Gustavo Peters. Optimization of clay mixtures for the fabrication of structural ceramic blocks (in portuguese). In: XX CRICTE - Conference on Scientific and Technological Research in Engineering, Foz do Iguaçu, Brazil, 2005. TRISTÃO, Gustavo Alves ; MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; FIGUEIREDO, Luciana Maria Bonvino. Evaluation of the prying-action on bolted T-Stubs (in portuguese). In: XXXI Jornadas Sudamericanas de Ingenieria Estructural, Mendoza, Argentina, 2004. FIGUEIREDO, Luciana Maria Bonvino ; TRISTÃO, Gustavo Alves ; GONÇALVES, Roberto Martins ; MAGGI, Yuri Ivan. Analytical models for the calculation of strength for composite steel-concrete extended end-plate connections in bending (in portuguese). In: XXXI Jornadas Sudamericanas de Ingenieria Estructural, Mendoza, Argentina, 2004. TRISTÃO, Gustavo Alves ; GONÇALVES, Roberto Martins ; MAGGI, Yuri Ivan ; MUNAIAR NETO, Jorge. Modelagem via MEF de ligações mistas. In: XXV CILAMCE - Iberian Latin-American Congress on Computational Methods in Engineering, 2004, Recife, 2004. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; CALADO, Luís. Numerical and experimental behavior of beam-to-column extended end plate connections. In: STESSA 2003 - Steel Structures in Seismic Areas, 2003, Nápoles. STESSA 2003 - Behaviour of Steel Structures in Seismic Areas. Lisse, Holanda : Swets & Zeitlinger B. B., 2003. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; MUNAIAR NETO, Jorge. Experimental analysis using bolted T-Stubs as contribution for the study of end-plate connections (in portuguese). In: IV CMM - Conference for Steel and Composite Structures, Lisboa, Portugal, 2003. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins. Assessment on the use of FEM modeling for the analysis of steel bolted connections. In: XXIV CILAMCE - Iberian Latin-American Congress on Computational Methods in Engineering, Ouro Preto, Brazil, 2003. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; MALITE, M.. Comparative Analisys of Bolted T-Stubs and Corresponding Extended End Plate Connections: a Numerical Approach. In: 3rd European Conference on Steel Structures, 2002, Coimbra. Proceedings of the 3rd European Conference on Steel Structures. Coimbra, Portugal : CMM - Associação Portuguesa de Construção Metálica e Mista, 2002. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; MUNAIAR NETO, Jorge. Equivalent T-Stubs and extended end-plate connections: comparisons using Eurocode (in portuguese). In: II CICOM International Conference on Steel Construction, São Paulo, Brazil, 2002. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; MALITE, M. ; CASTIGLIONI, C. A.. FEM models for the analysis of bolted beam-column extended end plate connections. In: Giornate Italiane della Costruzione in Acciaio, Veneza, Italy, 2001. MAGGI, Yuri Ivan ; GONÇALVES, Roberto Martins ; MALITE, M.. FEM Models for the yielding line analysis of bolted end-plate connections (in portuguese). In: XXIX Jornadas Sudamericanas de Ingenieria Estructural, Punta del Este, Uruguay, 2000.
MAGGI, Yuri Ivan ; PEDROZO, Patrícia Hommerding ; SCHEER, Sérgio ; MACHADO, Roberto Dalledone. Development of Hypermedia for Structural Engineering Teaching and Learning. In: World Congress on Computational Mechanics, Buenos Aires, Argentina, 1998. PROFESSIONAL EXPERIENCE Experience 2007-2010 exe engenharia Curitiba, Brazil Engineer Pile driving tower SUAPE Brazil: detailed design of a steel tower on barge to drive vertical and battered concrete piles; Study of barge stability during operation.(1221) Peru LNG Export Project Melchorita Peru: detailed engineering for marine structures including an access trestle, utility dock, loading platform, dolphins and catwalks; Structural analysis, technical assistance, development of construction methods, detailed design of temporary and auxiliary structures.(2471) Callao Conteiner Terminal Lima Peru: detailed engineering for marine structures, development of construction methods for wharf, quay structures and breakwater, detailed engineering of temporary and auxiliary structures, technical assistance at the job site.(2553) Moatize Coal Terminal Mozambique: basic design of marine structures - Access Trestle and Wharf, development of BOQ.(2560) Phosphate Terminal Bayóvar Peru: basic and detailed engineering comprising an Access Trestle and a Wharf; Construction planning and costs; Detailed construction methods; Detailed engineering of steel structures for the conveyor supports; Technical assistance at job site.(2771) Ventanilla Terminal Ventanilla Peru: basic design of marine structures comprising an Access Trestle, Loading Platform for liquids and Loading Platform for bulk solids for tender process including development of conceptual design, structural analysis, BOQ, tender documents, technical assistance to the tender process, structural optimization, construction cycles and work coordination.(2900) Algeria/Oman Fertilizer Project Marine Terminal Arzew Algeria: detailed engineering of Cantitravel structure; Detailed construction methods.(3510) Marina Jeddah Abu Dhabi Saudi Arabia: alternative basic design for tender comprising: Structural analysis; Development of BOQ, planning and costs; Development of construction methods.(3680) Shah Gas Project Ruwais Saudi Arabia: alternative basic design for tender comprising: Structural analysis of access trestle and wharf; Development of BOQ, planning and costs.(3850) EMBRAPORT Conteiner Terminal Santos Brazil: alternative basic design for tender including structural analysis, structural modeling assistance, development of BOQ, planning and costs.(4060) Multipurpose Port Massawa Eritrea: conceptual and basic design for marine structures composed by a TECON Terminal, a Loading Platform for liquids, General Cargo and Ro-Ro, development of BOQ and costs summary.(4120) Estaleiro Paraguaçu - Enseada do Paraguaçu - BA: Conceptual design for marine structures of a shipyard facilities (wharf with a loadout zone and heavy zone and pier); Development of BOQ.(4170)
Pile driving tower ITAPOÁ Brazil: detailed design of a steel tower on a barge to drive vertical and battered concrete piles; Stability analysis of barge for operation.(8070) Experience 2004-nowadays MAGGI & MAGGI LTDA Curitiba, Brazil Director Management; Consulting in civil engineering; Development of automation systems for engineering. Experience 2005-2009 University Positivo, Grupo POSITIVO Curitiba, Brazil Professor Undergraduation on Civil Engineering (teaching); Undergaduation on Economical Sciences (teaching); Undergraduation on Administration (teaching); Graduation on Civil Engineering Steel Structures (teaching and coordination); General Coordination of NUTEC Centre of Technological Development. Experience 2005-2009 SECCIONAL TECNOLOGIA E ENGENHARIA, SECCIONAL BRASIL Curitiba, Brazil Development of structures for telecom and transmission lines; Research Engineer technological development on engineer. Experience 2005-2009 FEDERAL COURT Curitiba, Brazil Engineering Expert Audits; Engineering technical assistance. Experience 2004-2005 UNIVERSITY OF MARINGÁ Maringá, Brazil Professor Undergraduation on Civil Engineering (teaching); Research in Structural Engineering. Experience 2004 ALUFER S.A Curitiba, Brazil Development of technical services. Experience 1998-2004 UNIVERSITY OF SÃO PAULO São Paulo, Brazil Graduation student and research engineer Research in structural engineering; Development of experimental analysis; Development of educational methods on civil engineering.
Experience 2002-2003 GEORGIA INSTITUTE OF TECHNOLOGY, G.I.T. Georgia, EUA Research Engineer Faculty staff Research Engineer; Development of research methods on Structures. Experience 1998 GILTEK BRASIL LTDA São Paulo, Brazil Development of automation tools for calculation of steel structures. Experience 1997-1998 DOW QUÍMICA DO BRASIL DIVISÃO SPUMA PAC São Paulo, Brazil Engineering consultant; Development of experimental methods for product quality check. Experience 1997 BRAFER CONSTRUÇÕES METÁLICAS Curitiba, Brazil Development of automation tools for calculation of steel latticed towers. Experience 1993-1998 FEDERAL UNIVERSITY OF PARANÁ Curitiba, Brazil Undergraduation student Researcher Special training group; Undergraduation student.