ONYX Preflight Training Navigation Workflow Issues Preflight Tabs
Preflight Module Tool Bar Tabs Tab Options Preview Area Information
Open in Preflight Recommended Workflow Highlight Printer File > Open Select Printer Select QuickSet You can still make changes to the final print settings in Preflight without changing the original QuickSet Check > Open in Preflight Browse for file Click > Open Opening jobs directly into Preflight allow for the same setting to be applied.
Preflight Tabs and Toolbar Overview Preflight Tabs Print and Media Color Management Size and Preview Rotation Page 1/All Tiling Setup Color Correction Slider Primary Curves Filters Print
Tabs Print and Media Size and Preview Tiling Setup Color Correction Print
Print and Media Tab Print and Media Select Media Configuration Select Media Name Select Print Mode Color Management Change Profiles Source Image View Format Resolution Size Pixels File Size Opening jobs using a QuickSet defines what is displayed in the fields. Making changes within Preflight effects only the image currently opened.
Size and Preview Tab Size and Preview Lock Aspect Ratio for Width and Height Magnification Rotation Image Flip PS Setup Page 1/All Crop Apply Maximum print area is defined by the printer status. Click the button to change page size. Click > Apply to accept changes and update the preview before going to the Print Tab and submitting the job.
Tiling Setup Tab Tiling Setup Enable Submit tiles as separate jobs Overlap Tile Create custom tiles Size using your mouse or Weld Overlap type in specific sizes for columns and rows. Reset All Tiles Overlap provides extra bleed for aligning tiles. Weld overlap activates after.5 and leaves most of the area unprinted to ensure a proper bond with adhesives.
Color Correction Tab Color Correction Slider Filters Primary Color Levels Color/Gray Levels White/Black Levels Color Replacement Spot Layer Tool Sample Point Calibrate your monitor for best results or select a specific monitor profile for the preview. Select File> Preferences and make your selection on the Display tab.
Color Correction Filters View multiple filters simultaneously Make Current Click > Filter > Manage > Export Apply to QuickSet Color Management Tab View up to 4-color corrections at a time by dragging the window separators in the lower left and upper right hand corners. Right-click in the blue title bar of the window to create a new filter
Spot Layer Tool - ProductionHouse Only Configure Media and Layer Options Before Opening Your File Single-Sided Output Images that are viewed only from one side Full Color Graphics on Colored Vinyl Garment Graphics on Colored Fabric Novelty Graphics on Wood, Metal, Mirror, and Colored Boards Double-Sided Output Images that are viewed from both side Novelty Graphics on Clear Configure Layers Clear Films, Opaque Backlit, and Decal (Static or Cling) Depending on the type of output Printer capabilities
Spot Layer Tool - Features Click > Enable to Activate Set Mask and Media Color Depending on your Application If you ve set a Media Color, Select Media Handling Options Active Spot Channel Flood Fill Underlay/Mask Fill Choke and Spread Sliders Diffuse Edge
Print Tab Print Copies Hold for Operator Print Setup Tile Setup Submit Send the job to RIP-Queue by clicking submit or use the printer icon on the toolbar. Print Setup displays workflow, marks and output information.
Questions
Thank You for Joining! www.onyxgfx.com Contact Your ONYX Representative training@onyxgfx.com support@onyxgfx.com sales@onyxgfx.com