70-659 Q&A. DEMO Version

Important Note Please Read Carefully For demonstration purpose only, this free version Chinatag study guide contains 10 full length questions selected from our full version products which have more than 200 questions each. This Study guide has been carefully written and compiled by Chinatag certification experts. It is designed to help you learn the concepts behind the questions rather than be a strict memorization tool. Repeated readings will increase your comprehension. For promotion purposes, all PDF files are not encrypted. Feel free to distribute copies among your friends and let them know Chinatag website. Study Tips This product will provide you questions and answers along with detailed explanations carefully compiled and written by our experts. Try to understand the concepts behind the questions instead of cramming the questions. Go through the entire document at least twice so that you make sure that you are not missing anything. Latest Version We are constantly reviewing our products. New material is added and old material is revised. Free updates are available for 90 days after the purchase. You should check the products page on the http://www.chinatag.com website for an update 3-4 days before the scheduled exam date. Please tell us what you think of our products. We appreciate both positive and critical comments as your feedback helps us improve future versions. Feedback on specific questions should be send to feedback@chinatag.com. Thanks for purchasing our products and look forward to supplying you with all your Certification training needs. Good studying! Technical and Support Team Chinatag LLC. Leading the way in IT testing and certification tools, www.chinatag.com - 2 -

QUESTION 1 You manage your virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 running on the internal network. You have several host servers in a perimeter network (also known as DMZ). You are installing VMM agents on the host servers. You need to ensure that the agents can communicate with the VMM server. Which two elements should you configure? (Each correct answer presents part of the solution. Choose two.) A. a port number B. an encryption key C. the VMM server name D. the URL of the VMM Self-Service Portal Answer: AB QUESTION 2 You have a Windows Server 2008 R2 Hyper-V server with two network adapters named Adapter1 and Adapter2. You need to configure the server to host virtual machines (VMs) on different networks. Which two actions should you perform on the host server? (Each co rrect answer presents part of the solution. Choose two.) A. Set Adapter1 as a management interface. B. Configure Adapter1 to support jumbo frames. C. Set Adapter2 in Trunk mode, and configure VM VLAN tags. D. Disable TCP Chimney support on Adapter2, and configure VM VLAN tags. Answer: AC QUESTION 3 Your company has a Microsoft Hyper-V Server 2008 R2 environment. You manage the virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You are creating a virtual test environment by installing two child partitions. The test environment must be completely isolated from all production servers. You need to ensure that the child partitions can communicate with each other. Which connection type should you configure? A. Private B. Internal C. External D. Dedicated host Answer: A QUESTION 4 You install Windows Server 2008 R2 (Server Core Installation) on a server. The server will store virtual machines (VMs) on a volume that is attached to the server by means of an iscsi connection. You need to configure the server so that VMs can be stored on the iscsi volume. Which two commands should you run? (Each correct answer presents part of the solution. Choose two.) A. iscsicli listtarget B. iscsicli qaddtarget C. iscsicli qlogintarget D. iscsicli AddConnection C 3

QUESTION 5 You add the Hyper-V role to your Windows Server 2008 R2 Datacenter server. You see the following error in the Windows system event log: Hyper-V launch failed: No-execute (NX) or DEP not enabled on processor 0x0 (check BIOS settings). You need to be able to start the Hyper-V services. What should you do? A. Remove and re-add the Hyper-V role. B. Restart the Hyper-V Virtual Machine Management service. C. Enable the Intel XD bit (exclude disable bit) or AMD NX bit (no execute bit). D. Enable the Intel Virtualization Technology (Intel VT) or AMD Virtualization (AMD-V). Answer: C QUESTION 6 You have a Microsoft Hyper-V Server 2008 R2 server. Yo u ne ed to join the server to an existing Active Directory Domain Services (AD DS) domain. Which should you use? A. ocsetup B. hvconfig C. sc config D. net config QUESTION 7 You install Windows Server 2008 R2 (Server Core Installation) on a server. You need to be able to remotely manage storage on the server by using Disk Manager. What should you do? A. Install the Microsoft Remote Server Administration Tools (RSAT). B. Use the DISKPART utility to run the attributes volume clear readonly command for each volume. C. Run the netsh advfirewall Firewall set rule group="remote Administration" new enable=yes command. D. Run the netsh advfirewall Firewall set rule group="remote Volume Management" new enable=yes command. Answer: D QUESTION 8 You are configuring a Windows Server 2008 R2 Hyper-V failover cluster. You configure five iscsi logical unit numbers (LUNs) on shared storage, and you present them to the first server. Each LUN appears twice in the Disk Management console. You need to ensure that each LUN appears only once in the Disk Management console. What should you do? A. Reset the iscsi initiator name to the default name. B. Install and configure Microsoft Multipath I/O (MPIO). C. In the Disk Management console, rescan the disks. D. In the Disk Management console, configure shadow copies. QUESTION 9 You install Windows Server 2008 R2 Enterprise (Server Core Installation). You need to add the Hyper - V role to the server. Which command should you run? 4

A. start /w hvconfig B. start /w ocsetup Microsoft-Hyper-V C. start /w ServerManagerCMD Cinstall Hyper-V D. net start " hyper-v virtual machine management " QUESTION 10 Your companys network includes an Active Directory Domain Services (AD DS) domain. You manage Hyper-V servers by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You install Windows Server 2008 R2 Datacenter (Server Core Installation) on 100 new servers, and you add the servers to the domain. You need to add the Hyper-V role to the 100 new servers. You must accomplish this goal by using the least amount of administrative effort. What should you do? A. Run the Add-WindowsFeature RSAT-Hyper-V PowerShell cmdlet. B. In Server Manager, use the Add Roles Wizard to add the Hyper-V role. C. In the VMM Administrator Console, use the Add Hosts Wizard to individually add each new server to VMM. D. In the VMM Administrator Console, use the Add Hosts Wizard to simultaneously add all 100 new servers to VMM. Answer: D 5