Commercial Water Heaters

POCKET GUIDE Commercial Water Heaters from Perfect Fit 1-800-HEATER3

Why is Perfect For Your Commercial Line. Trouble Zone The Perfect Fit Zone 156,000 BTU 199,900 BTU 250,000 BTU 300,000 BTU 360,000 BTU 399,900 BTU Competitor s larger units mean a difficult installation. Perfect Fit TM heavy duty gas models are shorter and narrower for easy and convenient installation.

Call Your Perfect Fit Sales Representative for a Custom Review of Your Commercial Market. Instant Diagnostics and Troubleshooting Our exclusive LED System Sentinel TM verifies electric element operation and location through a series of lights on a control panel. If an element isn t working, the missing light tells you exactly which one needs maintenance, eliminating guesswork on your part.you save time in installation, startup, and during maintenance problem solving. And you get your water supply back on line much faster. Super-Efficient, Super-Durable Heating Elements Electric models feature our LIFEGUARD TM electric heating elements, which operate at 98% efficiency. LIFEGUARD TM elements feature a stainless steel sheath surrounding a Nichrome wire filament for maximum resistance to water chemical corrosion and burnout, even when exposed to air or sediment. They re so good, that we offer a 3-year warranty on our elements instead of the normal 1-year. Accessories complete the line and the market fit. We provide a full range of accessories thermostats, T&P valves, burner assemblies and thermocouples to provide the contractor with everything he needs for installation. These items also give you additional margins and reinforce the profitability of commercial water heaters in your store.

Tap Into a Hot New Source for High Margin Sales. Perfect Fit gives you a small plan with a huge opportunity. Commercial water heaters can be a tremendous addition to your product mix. The market is big, and it covers a broad spectrum of businesses.you re surrounded by potential installations. Restaurants need thousands of gallons of hot water daily for dishwashing and food preparation. Hotels and motels have to meet guest demands for abundant hot water. Hospitals require instant access to hot water for cleaning, bathing patients, laundry and food preparation. And for hundreds of other businesses, hot water is an absolute necessity. The commercial water heater market is driven by immediate demand without hot water, there s no business. So to be successful, you have to have commercial units readily available. Fortunately, you can meet the needs of the majority of installations in the commercial water heater market with a small number of SKUs. Perfect Fit has made this easier than ever, with an all-new line of commercial water heaters, and a plan that reduces the SKUs you need to get involved. We ve also created the tools necessary for you to reach the commercial market and show the advantages of buying at your store.

The Commercial Water Heater Market At A Glance Over 140,000 Units Annually Nationwide 85% Replacement 15% New Construction 65% Gas 80% of Replacements Done by 20% of Contractors 4 or 5 SKUs account for 70% of installations Limited inventory, quick-ship replacement, strong margins now is the time. Over 70% of the commercial market can be serviced using just 4 or 5 models of heaters. Our merchandise plan lets you stock as few as six units in just one location and still have strong coverage of your commercial market. And since having product when the customer demands it is critical, we have quick-ship programs in place to restock your inventory as units are sold. Unlike the highly competitive residential market, the margins for commercials water heaters are substantial. And since competition is limited, they tend to stay that way.

TM The Perfect Fit line was created with the commercial customer in mind. Each heavy duty gas unit features smaller jacket diameters and shorter floor-to-vent heights to make replacement in tight squeeze situations easier, and to save space in new construction. These models have top, front, and rear inlet and outlet connections to make installation even easier. Electric models are also easy to install, and have self-diagnostic LED System Sentinel TM displays to verify element operation and location. And for special situations, the Perfect Fit TM line also includes point-of-use heaters, electric booster heaters, and commercial storage tanks all available for quick ship to your store. Low profile automatic flue damper to help minimize height Top, front, and rear outlet and inlet connections (up to 6) for easy installation Smaller diameters for easier replacement in tight situations More space saved in new construction Hand-hole cleanout for removing lime and sediment System Sentinal LED diagnostic system Full port, full flow drain valve Stainless Steel burner assembly that slides out for quick inspections

PERFECT FIT COMMERCIAL TABLE OF CONTENTS COMMERCIAL GAS WATER HEATERS Perfect Fit Models T50-98 thru T100-400(A)... 2-3 Light Duty Models T60-50 thru T100-80... 4-5 Induced Draft TD100-250(A) thru TD100-360(A)... 6-7 PowerVent TPV75-75E... 8-9 COMMERCIAL ELECTRIC WATER HEATERS Heavy Duty TES50, TES85 and TES120... 10-11 Heavy Duty TE50(A), TE85(A) and TE120(A)... 10-11 Heavy Duty TE12A, TE20A, TE30A and TE40A... 12-13 Booster TE10... 14-15 Light Duty Models TELD30 thru TELD120... 16-17 Light Duty Models TELDS30 thru TELDS52... 16-17 Point-of-Use TEGSP2 thru TEGSP30... 18-19 Storage Tanks ST80(A), ST120(A) and ST175(A)... 20-21 RHEEM-RUUD TO PERFECT FIT CONVERSION CHARTS Perfect Fit Gas Products introduced 8/96... 22 Electric Point-of-Use and Light Duty Products... 23 Electric Heavy Duty Products... 23 Electric Instantaneous/Booster Products... 23 COMPETITOR CROSS REFERENCE INDEX A.O. SMITH Gas Tank Type BT, BTR... 24-25 Storage Tank Systems... 26 Electric Light/Heavy Duty & Boosters DEL, DEN, DRE, DVE, CMC, SU... 28-29 AMERICAN Gas Tank Type PVCG32, CG32, DCG32, PVDCG32, DCG31... 30-31 Electric Light/Heavy Duty LDCE, ITCE, STCE, AITCE, ASTCE... 32-33 BRADFORD WHITE Gas Tank Type... 34-35 Storage Tank Systems... 36 Electric Heavy Duty Booster M-II-SF-CF, LI... 38-39 LOCHINVAR Gas Tank Type CNR, CNA... 40-41 Electric Light/ Heavy Duty & Boosters ETX, ETW, ESX, ETX, SB, HS, HC... 44-45 STATE Gas Tank Type SBT, SBF... 46-47 Electric Light /Heavy Duty SB6, LDE... 48-49

2 COMMERCIAL GAS TANK-TYPE WATER HEATERS 98,000 BTU/HR. THRU 400,000 BTU/HR. (On Selected Models) (With Optional Leg Kit) Perfect Fit Features: Small jacket diameters Short floor-to-vent heights Multiple water connections System Sentinel LED diagnostic system Standard Features: 3 year limited tank warranty Patented multiflue design Low profile automatic flue damper Spark-to-pilot ignition system Full port, full flow brass drain valve Factory installed AGA/ASME rated T&P relief valve Handhole cleanout Stainless steel burners 180 max operating temperature LED diagnostics on all damper assemblies for easier service Certified for a 150 PSI maximum working pressure (160 PSI for ASME models) Manual reset high limit (ASME models) Low NOx models available OUTLET TOP OUTLET REAR SIDE SYSTEM SENTINEL G 7" (178mm) H E OUTLET FRONT SIDE C INLET FRONT SIDE INLET REAR SIDE T&P INLET TOP D F B A

RECOVERY CAPACITIES MODEL GAL. INPUT BTU/HR. THERMAL TEMP. RISE - GPH NUMBER CAP. NATURAL & L.P. EFFICIENCY 40 100 140 T50-98 50 98,000 80% 238 95 68 T75-125 75 125,000 80% 303 121 87 T82-156 82 156,000 80% 378 151 108 T76-180 76 180,000 80% 436 175 125 T37-200 35 199,900 80% 485 194 138 T76-200 76 199,900 80% 485 194 138 T91-200 91 199,900 80% 485 194 138 T100-200(A) 100 199,900 80% 485 194 138 T72-250(A) 72 250,000 80% 606 242 173 T100-250(A) 100 250,000 80% 606 242 173 T100-270(A) 100 270,000 80% 654 262 187 T72-300(A) 72 300,000 80% 727 291 208 T85-300(A) 85 300,000 80% 727 291 208 T100-310(A) 100 310,000 80% 752 301 215 T65-360(A) 65 360,000 80% 873 349 249 T65-400(A) 65 399,900 80% 969 388 277 T85-400(A) 85 399,900 80% 969 388 277 T100-400(A) 100 399,900 80% 969 388 277 DIMENSIONAL INFORMATION (All dimensions shown in inches) A B C D E F G H WATER CONNECTIONS APPROX. SHIPPING CLEARANCES TO TOP FRONT REAR WEIGHT (LBS.) COMBUSTABLES IN/OUT SIDE SIDE STANDARD ASME SIDE REAR TOP 62-3/4 57-1/8 22-1/2 22-5/8 5 50-1/2 1/2 15 1 1-1/2 1-1/2 270 N/A 2" 2" 12" 65-1/2 61 26-1/4 25 5 56 3/4 20 1-1/2 1-1/2 1-1/2 480 N/A 2" 2" 12" 68-13/16 64 26-1/4 25 6 58-5/8 3/4 20 1-1/2 1-1/2 1-1/2 490 N/A 2" 2" 12" 68-13/16 64 26-1/4 25 6 58-5/8 3/4 20 1-1/2 1-1/2 1-1/2 540 N/A 2" 2" 12" 49-1/4 43-3/8 26-1/4 25 6 37-5/8 3/4 20 1-1/2 1-1/2 1-1/2 405 N/A 2" 2" 12" 68-13/16 64 26-1/4 25 6 58-5/8 3/4 20 1-1/2 1-1/2 1-1/2 540 N/A 2" 2" 12" 76-5/16 71-13/16 26-1/4 30-5/8 6 66-3/8 3/4 20 1-1/2 1-1/2 1-1/2 600 N/A 2" 2" 12" 73-1/16 66-1/8 30-1/4 23-1/4 6 57-1/2 3/4 23 1-1/2 2 2 780 835 2" 4" 12" 71-1/16 64-1/2 26-1/4 25 6 58-5/8 3/4 20 1-1/2 1-1/2 1-1/2 590 630 6" 6" 12" 73-1/4 66-1/8 30-1/4 23-1/4 8 57-1/2 3/4 23 1-1/2 2 2 795 835 2" 4" 12" 73-7/8 66-1/8 30-1/4 23-1/4 8 57-1/2 3/4 23 1-1/2 2 2 805 845 2" 4" 12" 71 64-1/2 26-1/4 25 8 58-5/8 3/4 20 1-1/2 1-1/2 1-1/2 590 630 6" 6" 12" 78-7/16 72-5/16 26-1/4 30-5/8 8 66-3/8 3/4 20 1-1/2 1-1/2 1-1/2 640 680 6" 6" 12" 75 68-1/2 30-1/4 32-1/4 7 61-3/4 3/4 23 1-1/2 2 2 770 810 4" 4" 12" 70-11/16 64-1/2 26-1/4 25 8 58-5/8 3/4 N/A N/A 1-1/2 1-1/2 640 680 6" 6" 12" 70-11/16 64-1/2 26-1/4 25 8 58-5/8 3/4 N/A N/A 1-1/2 1-1/2 640 680 6" 6" 12" 78-13/16 72-5/16 26-1/4 30-5/8 10 66-3/8 3/4 20 1-1/2 1-1/2 1-1/2 640 680 6" 6" 12" 76 68-1/2 30-1/4 32-1/4 8 61-3/4 1* 23 1-1/2 2 2 770 810 4" 4" 12" Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. Recovery rate shown on the rating plate (75%) Thermal Efficiency in accordance with ANSI Z21.10.3 labeling requirements. (A) Indicates Available ASME Model. *3/4" for L.P. Models. Increase Height 3-5/8" for NSF Models. All Models Require a 120V Power Source. Available in Low NOx for S. Cal. and Texas markets. These models have been tested according to ANSI test procedures, and exceed the thermal efficiency and standby loss requirements of ASHRAE Standard 90.1b-2001 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states including California Energy Commission (CEC). All models are North Carolina Code compliant. 3

GAS TANK-TYPE WATER HEATERS 50,000 BTU/HR. THRU 80,000 BTU/HR. 4 (with optional leg kit) Standard Features: Small jacket diameters Short floor-to-vent heights 3 year limited tank warranty Rigid foam insulation Heavy duty anode rod Factory installed AGA/ASME rated T&P relief valve Full port, full flow brass drain valve Gas control system Certified for a 150 PSI maximum working pressure Low NOx models available T60-50N and T75-75N meets S. Cal. and Texas requirements Order T100-80N for Low NOx A B D 1/2" F E C G 3/4" N.P.T. RELIEF VALVE OPENING SIDE TAPS (75 GAL. MODEL ONLY) T60-50 & G75-75 SIDE TAPS ON 75 GAL. MODEL ONLY T60-50 WATER CONNECTIONSARE 3/4" NPT A B D F E HOT & COLD C 1/2" GAS CONNECTION 3/4" T & P 2" T100-80 WATER CONNECTIONS ARE 1" NPT G T75-75 WATER CONNECTIONSARE 1" NPT

RECOVERY CAPACITIES MODEL CAP. INPUT TEMPERATURE RISE DEGREES F GALLONS PER HOUR NUMBER GALS. BTU/HR. 40 50 60 70 80 90 100 110 120 130 T60-50N 60 50,000 115 92 77 66 58 51 46 42 38 35 T60-50LP 60 50,000 115 92 77 66 58 51 46 42 38 35 T75-75N-2 75 75,100 182 146 121 104 91 91 73 66 61 56 T75-75 LP 75 63,000 145 116 97 83 73 64 58 53 48 45 T100-80 100 80,000 194 155 129 111 97 86 78 71 65 60 T100-80N 100 76,000 184 147 123 105 92 82 74 67 61 57 Recovery rating is based on recovery efficiencies obtained in a CSA certified laboratory. N = Low NOx CLEARANCES TO COMBUSTIBLES MODEL REAR/ NUMBER SIDES FRONT TOP T60-50 1" 3" 2" T75-75 1" 3" 2" T100-80 1" Alcove 12" DIMENSIONAL INFORMATION (All dimensions shown in inches) MODEL APPROX. SHIPPING NUMBER A B C D E F G WEIGHT (LBS.) T60-50 62 58 23 13-1/4 4 8 48-1/2 180 T75-75 64 60 26-1/4 13-1/4 4 11 53-1/4 320 T100-80 69-5/8 65-3/4 28-1/4 11 4 15 57-13/16 410 5

(On Selected Models) (With Optional Leg Kit) Perfect Fit Features: Small jacket diameters Short floor-to-vent heights Multiple water connections System Sentinel LED diagnostic system Standard Features: 3 year limited tank warranty Patented multiflue design Factory installed draft inducer provides an induced draft allowing higher BTU's to be vented through a 6" vent 6 INDUCED DRAFT WATER HEATERS 250,000 BTU/HR. THRU 360,000 BTU/HR. 6" Category I appliance allows for easy upgrade or retrofit of existing applications Spark-to-pilot ignition system Full port, full flow brass drain valve OUTLET TOP OUTLET REAR SIDE SYSTEM SENTINEL G 7" (178mm) H E OUTLET FRONT SIDE C INLET FRONT SIDE INLET REAR SIDE T&P INLET TOP D F B A

RECOVERY CAPACITIES Recovery in U.S. Gallons/Hr. (GPH) at Various Temperature Rises. MODEL INPUT BTU/HR. THERMAL NUMBER NATURAL & L.P. EFFICIENCY UNITS 40 F 50 F 60 F 70 F 80 F 90 F 100 F 110 F 120 F 130 F 140 F TD100-250(A) 250,000 80% GPH 606 485 404 346 303 269 242 220 202 186 173 TD100-270(A) 270,000 80% GPH 655 524 436 374 327 291 262 238 218 201 187 TD100-310(A) 310,000 80% GPH 752 601 501 429 376 334 301 273 251 231 215 TD100-360(A) 360,000 80% GPH 873 698 582 499 436 388 349 317 291 269 249 Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. These models have been tested according to ANSI Z21.10.3 test procedures, and exceed the thermal efficiency and standby loss requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states. (A) indicates available ASME model. DIMENSIONAL INFORMATION All Dimensions Shown in English. WATER CONNECTIONS APPROXIMATE MODEL TOP FRONT REAR SHIPPING WEIGHT NUMBER UNITS A B C D E F G H IN/OUT SIDE SIDE STD. ASME TD100-250(A) inches 73-1/2 66-3/4 30-1/4 23-1/4 6 57-1/2 3/4 23 1-1/2 2 2 795 lbs. 835 lbs. TD100-270(A) inches 73-1/2 66-3/4 30-1/4 23-1/4 6 57-1/2 3/4 23 1-1/2 2 2 795 lbs. 835 lbs. TD100-310(A) inches 73-1/2 66-3/4 30-1/4 23-1/4 6 57-1/2 3/4 23 1-1/2 2 2 795 lbs. 835 lbs. TD100-360(A) inches 73-1/2 66-3/4 30-1/4 23-1/4 6 57-1/2 3/4 23 1-1/2 2 2 795 lbs. 835 lbs. All models require a 120V /3 amp power source. (A) suffix indicates ASME tank construction available. 7

POWERVENT GAS WATER HEATER 75,000 BTU/HR. 8 Standard Features: Uses 3" or 4" schedule 40 PVC, CPVC or ABS pipe Vents up to 95 feet Easy to install/maintain blower assembly Spark-to-pilot ignition system Low NOx burner Self-diagnostic thermostat/gas valve 2" rigid foam insulation 3 year limited warranty Factory installed AGA/ASME rated T&P relief valve Certified for a 150 PSI maximum working pressure Durable brass drain valve POWER VENT ASSEMBLY G HOT WATER CONNECTION A B 1/2" E C ANODE ROD G COLD WATER CONNECTION T&P FITTING 3/4" N.P.T. F SIDE TAPS D

DIMENSIONAL INFORMATION (All dimensions shown in inches) MODEL APPROX. SHIPPING NUMBER A B C D E F G WEIGHT (LBS.) TPV75-75FV-2 72 60-1/8 26-1/4 14-3/4 11 53-1/4 1 330 RECOVERY CAPACITIES MODEL INPUT BTU/HR. TEMPERATURE RISE - DEGREES F - GALLONS PER HOUR NUMBER NATURAL & L.P. 40 50 60 70 80 90 100 110 120 TPV75-75FV-2 75,000 173 138 115 99 86 77 69 63 58 TPV75-75PFV-2 70,000 161 129 107 92 81 72 64 59 54 9

10 ELECTRIC TANK-TYPE WATER HEATERS 6 KW THRU 54 KW (With Optional Seal Kit) Standard Features: System Sentinel L.E.D. diagnostic system Surface mounted and immersion thermostat models available Lifeguard stainless steel elements 208, 240, 277 and 480 voltages 3 year limited tank warranty Manual reset high limit control Magnetic contactors and integral fusing 1-1/2" NPT inlet/outlet dielectric nipples factory installed 3" Rigid polyurethane foam insulation Heavy duty anode rods Full port, full flow, brass drain valve Factory installed AGA/ASME rated T&P relief valve Certified for a 150 PSI maximum working pressure (160 PSI for ASME models) Factory wired 3-phase Options: UL Sanitation compliant models avaliable Thermostat staging ASME construction available on E models 36 1 /8" 5" D C B 1 1 /2" HOT OUTLET NIPPLE SYSTEM SENTINEL AUTOMATIC TEMPERATURE CONTROL (IMMERSION ONLY) 1 1 /2" COLD INLET NIPPLE A

MODEL NUMBERS SURFACE MOUNTED THERMOSTATS Tank Capacity In Gallons IMMERSION THERMOSTATS Tank Capacity In Gallons 50 85 120 50 85 120 TES50-6-G TES85-6-G TES120-6-G TE50-6-G TE85-6-G TE120-6-G TES50-9-G TES85-9-G TES120-9-G TE50-9-G TE85-9-G TE120-9-G TES50-12-G TES85-12-G TES120-12-G TE50-12-G E85-12-G TE120-12-G TES50-15-G TES85-15-G TES120-15-G TE50-15-G TE85-15-G TE120-15-G TES50-18-G TES85-18-G TES120-18-G TE50-18-G TE85-18-G TE120-18-G TES50-24-G TES85-24-G TES120-24-G TE50-24-G TE85-24-G TE120-24-G TES50-27-G TES85-27-G TES120-27-G TE50-27-G TE85-27-G TE120-27-G TES50-30-G TES85-30-G TES120-30-G TE50-30-G TE85-30-G TE120-30-G TES50-36-G TES85-36-G TES120-36-G TE50-36-G TE85-36-G TE120-36-G TES50-45-G TES85-45-G TES120-45-G TE50-45-G TE85-45-G TE120-45-G TES50-54-G TES85-54-G TES120-54-G TE50-54-G TE85-54-G TE120-54-G RECOVERY CAPACITIES INPUT EQUIVALENT TEMPERATURE RISE DEGREES F GPH KW BTU/HR. 40 60 80 100 120 140 6 20,473 62 41 31 25 21 18 9 30,709 92 61 46 37 31 26 12 40,946 123 82 61 49 41 35 15 51,182 154 102 77 61 51 44 18 61,418 184 123 92 74 61 53 24 81,891 246 164 123 98 82 70 27 92,128 276 184 138 111 92 79 30 102,364 307 205 154 123 102 88 36 122,837 369 246 184 147 123 105 45 153,546 461 307 230 184 154 132 54 184,256 553 369 276 221 184 158 In accordance with ANSI test procedures, these models tested below the maximum allowable standby loss levels of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy codes of all states including California Energy Commision (CEC). DIMENSIONAL INFORMATION(All dimensions shown in inches) WATER TEMPERATURE RATINGS APPROX. SHIPPING MODEL WEIGHT (LBS.) NUMBER A B C D STD. ASME* TE(S)50 43-5/8 26-1/4 32 17-1/4 270 320 TE(S)85 57-11/16 28-1/4 34 18-1/4 350 380 TE(2)120 67-5/8 30-1/4 36 19-1/4 430 460 *ASME construction available only on Immersion Thermostat Models. All models are North Carolina Code compliant. Minimum Maximum High Model Thermostat Delivered Delivered Temperature Number Type Temperature Temperature Limit TES50 Surface 90 F 160 F 180 F TES85, TES120 Surface 120 F 160 F 190 F TE50, TE85, TE120 Immersion 90 F 190 F 200 F 11

12 ELECTRIC TANK-TYPE WATER HEATERS 3 KW THRU 36 KW (With Optional Seal Kit) Standard Features: System Sentinel L.E.D. diagnostic system Immersion thermostat Lifeguard stainless steel elements 208, 240, 277 and 480 voltages 3 year limited tank warranty Manual reset high limit control Magnetic contactors and integral fusing 3/4" couplings 2-1/2" Rigid polyurethane foam insulation Heavy duty anode rods Brass drain valve Factory installed AGA/ASME rated T&P relief valve Certified for a 160 PSI maximum working pressure All models ASME certified Factory wired 3-phase Options: UL Sanitation compliant ring seal kits avaliable B 8" 3 /4" T&P A E 4 1 /4" 2 1 /2" D C SYSTEM SENTINEL AUTOMATIC TEMPERATURE CONTROL

INPUT KW 3 6 9 12 15 18 24 27 30 36 MODEL NUMBERS IMMERSION THERMOSTATS Tank Capacity In Gallons 12 20 30 40 TE12A-3-G TE20A-3-G TE30A-3-G TE40A-3-G TE12A-6-G TE20A-6-G TE30A-6-G TE40A-6-G TE12A-9-G TE20A-9-G TE30A-9-G TE40A-9-G N/A TE20A-12-G TE30A-12-G TE40A-12-G N/A TE20A-15-G TE30A-15-G TE40A-15-G N/A TE20A-18-G TE30A-18-G TE40A-18-G N/A N/A TE30A-24-G TE40A-24-G N/A N/A TE30A-27-G TE40A-27-G N/A N/A TE30A-30-G TE40A-30-G N/A N/A TE30A-36-G TE40A-36-G DIMENSIONAL INFORMATION All dimensions shown in inches MODEL In accordance with ANSI test procedures, these models tested below the maximum allowable standby loss levels of ASHRAE Standard 90.1b- 2001 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy codes of all states including California Energy Commision (CEC). APPROX. SHIPPING WEIGHT (LBS.) NUMBER A B C D E ASME TE12A 28-1/2 19 24-1/4 14-3/4 26-1/4 135 TE20A 36-1/2 19 24-1/4 14-3/4 26-1/4 160 TE30A 49-1/4 19 24-1/4 14-3/4 32-1/2 192 TE40A 53-3/4 21 26-3/4 16-1/2 32-1/2 228 WATER TEMPERATURE RATINGS Model Tank Capacity Thermostat Minimum Delivered Maximum Delivered High Temperature Number Gallons Type Temperature Temperature Limit TE12A 13 Immersion 90 F 190 F 200 F TE20A 19.9 Immersion 90 F 190 F 200 F TE30A 30 Immersion 90 F 190 F 200 F TE40A 40 Immersion 90 F 190 F 200 F RECOVERY CAPACITIES Recovery in U.S. Gallons/Hr. (GPH) at Various Temperature Rises INPUT EQUIVALENT 40 F 60 F 80 F 100 F 120 F 140 F KW BTU/HR. (22.2 C) (33.3 C) (44.4 C) (55.6 C) (66.7 C) (77.8 C) 3 10,236 31 21 16 12 10 9 6 20,473 62 41 31 25 21 18 9 30,709 93 62 47 37 31 27 12 40,946 124 83 62 50 41 35 15 51,183 155 103 78 62 52 44 18 61,420 186 124 93 74 62 53 24 81,893 248 165 124 99 83 71 27 92,129 279 186 140 112 93 80 30 102,366 310 207 155 124 103 89 36 122,839 372 248 186 149 124 106 All models are North Carolina and Massachusetts Code compliant. 13

14 ELECTRIC BOOSTER WATER HEATERS 6 KW THRU 54 KW Standard Features: System Sentinel L.E.D. diagnostic system Immersion thermostats Manual reset high limit control 208, 240, 277 and 480 voltages 3 year limited tank warranty Magnetic contactors and integral fusing Heavy duty anode rods Durable brass drain valve Factory installed AGA/ASME rated T&P relief valve 6" stainless steel legs UL Sanitation compliant Certified for a 150 PSI max working pressure Factory wired 3-phase Factory Accessories Solid state low water cut-off Pressure reducing valve with bypass

RECOVERY CAPACITIES MODEL INPUT EQUIVALENT TEMPERATURE RISE DEGREES F GPH NUMBER KW BTU/HR. 40 60 80 100 120 140 TE10-6-G 6 20,473 62 41 31 25 21 18 TE10-9-G 9 30,709 92 61 46 37 31 26 TE10-12-G 12 40,946 123 82 61 49 41 35 TE10-15-G 15 51,182 154 102 77 61 51 44 TE10-18-G 18 61,418 184 123 92 74 61 53 TE10-24-G 24 81,891 246 164 123 98 82 70 TE10-27-G 27 92,128 276 184 138 111 92 79 TE10-30-G 30 102,364 307 205 154 123 102 88 TE10-36-G 36 122,837 369 246 184 147 123 105 TE10-45-G 45 153,546 461 307 230 184 154 132 TE10-54-G 54 184,256 553 369 276 221 184 158 Approximate Weight 110 Lbs. WATER TEMPERATURE RATINGS 3/4" T&P 21 3 /4" Minimum Maximum High Gallon Thermostat Delivered Delivered Temperature Capacity Type Temperature Temperature Limit 10 Immersion 90 F 190 F 200 F 17" 13 3 /4" 6" 5 3 /4" 8 1 /4" INLET 4 3 /4" OUTLET CONTACTORS FUSE BLOCKS (FUSED MODELS ONLY) TRANSFORMER TERMINAL BLOCK 1 1 /4" HOT OUTLET NIPPLE 1 1 /4" COLD INLET NIPPLE OPTIONAL THERMOSTATS (-GS MODELS ONLY) THERMOSTAT TEMPERATURE LIMIT CONTROL 21 1 /2" ELEMENT AND CLEANOUT ACCESS PANEL These models meet the energy efficiency levels of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states including California Energy Commision (CEC). All models are North Carolina Code compliant. 15

ELECTRIC TANK-TYPE WATER HEATERS 3KW THRU 12KW 16 Standard Features: B DIA. 208, 240, 277, and 480 voltages Porcelain enamel lined tank Heavy duty anode rod 2-1/2" of rigid foam insulation Baked enamel steel jacket Patented resistor heating elements Surface mounted thermostat Manual reset high limit control 3 year limited warranty Certified for a 150 PSI maximum working pressure Factory installed AGA/ASME rated T&P relief valve Durable brass drain valve A HOT WATER CONNECTION 3/4" T&P 8" COLD WATER CONNECTION ANODE ROD WATER CONNECTIONS ALL 3/4" NPT

ELECTRICAL CHARACTERISTICS AND CAPACITIES (Non-Simultaneous/Single or Three Phase Operation) ELEMENT RECOVERY CAPACITIES GPH FULL LOAD CURRENT (AMPS) WATTAGE @ TEMPERATURE RISE OF (ALL TERMINALS) UPPER/LOWER 40 60 80 100 120 208 240 277 480 3000/3000 31 20 15 12 10 14.4 12.5 10.8 6.3 4000/4000 41 27 20 16 13 19.2 16.7 14.4 8.3 4500/4500 46 31 23 18 15 21.6 18.8 16.2 9.4 5000/5000 51 34 26 20 17 24 20.8 18.1 10.4 6000/6000 61 41 31 25 20 28.8 25 21.7 12.5 ELECTRICAL CHARACTERISTICS AND CAPACITIES (Simultaneous/Three Phase Operation) ELEMENT RECOVERY CAPACITIES GPH FULL LOAD CURRENT (AMPS) WATTAGE @ TEMPERATURE RISE OF (TERMINAL L3/TERMINALS L1 & L2) UPPER/LOWER 40 60 80 100 120 208 240 480 3000/3000 61 41 31 24 20 25/14.4 21.7/12.5 10.8/6.3 4000/4000 81 54 41 32 27 33.3/19.2 28.9/16.7 14.4/8.3 4500/4500 91 61 45 37 31 37.5/21.6 32.5/18.8 16.2/9.4 5000/5000 102 68 51 41 34 41.6/24 36.1/20.8 18/10.4 6000/6000 122 81 61 49 41 N/A 43.3/25.0 21.7/12.5 DIMENSIONAL INFORMATION* (All dimensions shown in inches) MODEL TANK CAPACITY APPROX. SHIPPING NUMBER GALLONS A B WEIGHT (LBS.) TELDS30 30 29-1/2 22-1/4 105 TELDS40 38 31-1/2 23 135 TELDS52 47 32-1/2 26-1/4 150 TELD30 30 45-1/2 17-3/4 90 TELD40 40 46-1/4 22-1/4 108 TELD52 50 57 22-1/4 127 TELD66 65 58-3/4 23 170 TELD80 80 59 24-1/2 200 TELD120 120 62-1/2 28-1/4 330 WATER TEMPERATURE RATINGS: Thermostat Type: Surface Mounted Min. Delivered Temperature: 110 F Max. Delivered Temperature: 170 F High Temperature Limit: 190 F These models have been tested according to DOE test procedures, and exceed the minimum energy factor requirements of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy codes of all states including California Energy Commission (CEC). All models are North Carolina and Massachusetts Code compliant. * Dimensions reflect models built after 1/20/04. 17

POINT-OF-USE ELECTRIC TANK-TYPE 1440 WATTS THRU 6000 WATTS 18 Standard Features: 120, 208, 240, 277 and 480 voltages Porcelain enamel lined tank Heavy duty anode Rigid foam insulation Baked enamel steel jacket Resistor heating element Surface mounted thermostat Manual reset high limit control 3 year limited warranty Certified for a 150 PSI maximum working pressure Factory installed AGA/ASME rated T&P valve Optional wall mounting kit These models meet the minimum energy factor requirements of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy codes of all states including California Energy Commission (CEC). All models are North Carolina and Massachusetts Code compliant. ELEMENT AVAILABILITY WATTAGE 120 V 208 V 240 V 277 V 480 V 1,440 **Y N/A N/A N/A N/A 1,500 Y Y **Y N/A N/A 2,000 Y Y Y Y Y 3,000 Y Y Y Y Y 4,500 N/A Y *Y *Y *Y 6,000 N/A Y Y Y Y *Not available in TEGSP6 & TEGSP10 **TEGSP2 available only in these configurations.

DIMENSIONAL INFORMATION (All dimensions shown in inches)* MIN MAX TANK SHIPPING MODEL WATTS WATTS GALLONS A B C D E WEIGHT (LBS.) TEGSP2 1,440 1,500 2-1/2 14 9-3/4 18 TEGSP6 1,500 6,000 6 15-1/8 15-3/4 12-5/8 11-5/8 4-1/4 41 TEGSP10 1,500 6,000 10 22-7/8 15-3/4 20-3/8 19-3/8 4-1/4 53 TEGSP15 1,500 6,000 15 24-1/4 17-3/4 21-7/8 19-3/8 4-5/8 65 TEGSP20 1,500 6,000 20 25-1/8 19-3/4 22-5/8 19-5/8 5-1/8 76 TEGSP30 1,500 6,000 30 30 21-3/4 23 23 2-3/4 115 Basic model numbers are listed. When ordering specify electrical input to determine specific model number: Basic Model: TEGSP6 Specified Input: 6,000 Watts Specified Model Number: TEGSP6-6 * Dimensions reflect models built after 1/20/04. MODELS: TEGSP6 TEGSP10 TEGSP15 TEGSP20 TEGSP30 HOT WATER OUTLET C A Water Connections 3/4" NPT D COLD WATER INLET B 3/4" T&P E A B DIA. Water Temperature Ratings: Thermostat Type: Surface Mounted Min. Delivered Temperature: 110 F Max. Delivered Temperature: 170 F High Temperature Limit: 190 F HOT WATER CONNECTION 3/4" T&P MODEL: TEGSP2 Water Connections 1/2" NPT 3 1 /2" COLD WATER CONNECTION ELECTRICAL CHARACTERISTICS ELEMENT FULL LOAD CURRENT IN AMPERES WATTAGE 120 V 208 V 240 V 277 V 480 V 1,440 12.0 N/A N/A N/A N/A 1,500 12.5 7.2 6.3 N/A N/A 2,000 16.7 9.6 8.3 7.2 4.2 3,000 25.0 14.4 12.5 10.8 6.3 4,500 N/A 21.6 18.8 16.2 9.4 6,000 N/A 28.8 25.0 21.7 12.5 All models employ 1 heating element resulting in a 2-wire outlet (single phase) electrical configuration. RECOVERY CAPACITIES TEMPERATURE RISE - DEGREES F - ELEMENT GALLONS PER HOUR WATTAGE 40 F 60 F 80 F 100 F 120 F 140 F 1,440 15 10 7 6 5 4 1,500 15 10 8 6 5 4 2,000 20 14 10 8 7 6 3,000 30 20 15 12 10 9 4,500 46 30 23 18 15 13 6,000 61 41 30 24 20 17 19

20 STORAGE TANKS Standard Features: Porcelain enamel lined tank Heavy duty anode rods ASME construction available 2" of rigid foam insulation Baked enamel steel jacket 5 year limited warranty These models exceed the minimum efficiency requirements of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact).

DIMENSIONAL INFORMATION (DIMENSIONS SHOWN IN INCHES) WATER CONNECTIONS APPROX. MODEL TOP FRONT WEIGHT (LBS.) NUMBER A B C D OUTLET SIDE STANDARD ASME ST80(A) 58-5/16 24-3/16 13-3/16 6-3/16 2 2 220 lbs. 260 lbs. ST120(A) 59-1/4 28-1/4 11-1/16 4-1/16 2 2 300 lbs. 340 lbs. ST175(A) 67-1/4 32-1/4 12-9/16 5-9/16 2-1/2 2-1/2 600 lbs. 600 lbs. HOT OUTLET OPENING 1" NPT T&P OPENING HOT B 3/4" NPT THERMOMETER OPENING TANK INFORMATION TANK MAXIMUM WORKING MODEL CAPACITY PRESSURE NUMBER (GALLONS) STD. ASME ST80(A) 80 150 PSI 125 PSI ST120(A) 115 150 PSI 160 PSI ST175(A) 175 150 PSI 150 PSI 3/4" NPT AQUASTAT OPENING CIRCULATING CONNECTIONS D C A 21

RHEEM/RUUD TO PERFECT FIT CONVERSION CHART RHEEM/RUUD PERFECT FIT Model Btu/Hr or kw Gal Model Btu/Hr or kw Gal Perfect Fit Gas Products introduced 8/96. G60-50N 60,000 50 T60-50N 60,000 50 GPV75-75E 75,000 75 TPV75-75E 75,000 75 G75-75N 75,000 75 T75-75N 75,500 75 G100-75(N) 75,000 100 T100-75(N) 75,000 100 G50-98 98,000 50 T50-98 98,000 50 G75-125 125,000 75 T75-125 125,000 75 G82-156 156,000 82 T82-156 156,000 82 G37-200 199,900 37 T37-200 199,900 37 G76-180 180,000 76 T76-180 180,000 97 G76-200 199,900 76 T76-200 199,900 76 G91-200 199,900 91 T91-200 199,900 91 G100-200 199,900 100 T100-200 199,900 100 G72-250(A) 250,000 72 T72-250(A) 250,000 86 G100-250(A) 250,000 100 T100-250(A) 250,000 100 G100-270(A) 270,000 100 T100-270(A) 270,000 100 G72-300(A) 300,000 72 T72-300(A) 300,000 72 G85-300(A) 300,000 85 T85-300(A) 300,000 85 G65-360(A) 360,000 65 T65-360(A) 360,000 65 22

G65-400(A) 399,900 65 T65-400(A) 399,900 65 G85-400(A) 399,900 85 T85-400(A) 399,900 85 G100-400(A) 399,900 100 T100-400(A) 399,900 100 Electric - Point-of-Use and Light Duty Products EGSP2 1.5 Max 2.5 TEGSP2 1.5 Max 2.5 EGSP6 6 Max 6 TEGSP6 6 Max 6 EGSP10 6 Max 10 TEGSP10 6 Max 10 EGSP15 6 Max 15 TEGSP15 6 Max 15 EGSP20 6 Max 20 TEGSP20 6 Max 20 EGSP30 6 Max 30 TEGSP30 6 Max 30 ELDS30 12 Max 30 TELDS30 12 Max 30 ELDS40 12 Max 40 TELDS40 12 Max 40 ELD30 9 Max 30 TELD30 9 Max 30 ELD40 12 Max 40 TELD40 12 Max 40 ELD52 12 Max 50 TELD52 12 Max 50 ELDS52 12 Max 50 TELDS52 12 Max 50 ELD80 12 Max 80 TELD80 12 Max 80 ELD120 12 Max 120 TELD120 12 Max 120 Electric - Heavy Duty Products ES50/E50(A) 6 to 54 50 TES50/TE50(A) 6 to 54 50 ES85/E85(A) 6 to 54 85 TES85/TE85(A) 6 to 54 85 ES120/E120(A) 6 to 54 120 TES120/TE120(A) 6 to 54 120 Electric - Instantaneous/Booster Product E10 6 to 54 10 TE10 6 to 54 10 23

A.O. SMITH TO PERFECT FIT CONVERSION CHART A.O. SMITH PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height Gas Tank Type Models BTR-120 120,000 71 27-3/4" 69-3/4" T75-125 125,000 75 26-1/4" 65-1/2" BTR-154 154,000 81 27-3/4" 73" T82-156 156,000 82 26-1/4" 68-13/16" BTR-180 180,000 81 27-3/4" 67-1/2" T76-180 180,000 76 26-1/4" 68-13/16" BTR-197 199,000 100 27-3/4" 74" T100-200 199,900 100 30-1/4" 73-1/16" BTR-198 199,000 100 27-3/4" 74" T100-200 199,900 100 30-1/4" 73-1/16" BTR-199 190,000 81 27-3/4" 67-1/2" T76-200 199,900 76 26-1/4" 68-13/16" BTR-200(A) 199,000 100 30-1/4" 72" T100-200(A) 199,900 100 30-1/4" 73-1/16" BTR-250(A) 250,000 100 30-1/4" 72" T100-250(A) 250,000 100 30-1/4" 73-1/4" BTR-251(A) 251,000 65 27-3/4" 75" T72-250(A) 250,000 72 26-1/4" 71-1/16" BTR-275(A) 275,000 100 30-1/4" 72" T100-270(A) 270,000 100 30-1/4" 73-7/8" BTR-305(A) 305,000 65 27-3/4" 75" T72-300(A) 300,000 72 26-1/4" 71" BTR-365(A) 365,000 85 27-3/4" 79-1/2" T65-360(A) 360,000 65 26-1/4" 70-11/16" BTR-400(A) 399,000 100 30-1/4" 75-1/2" T100-400(A) 399,900 100 30-1/4" 76" 24

Conservationist/Damper Gas Tank Type Models BT-80 75,000 75 25-1/2" 61-1/8" T75-75N 75,000 75 26-1/4" 64-3/8" BT-100 75,000 100 26-1/2" 68-3/4" T100-75(N) 75,000 100 26-1/4" 67-7/8" NOTE: (A) denotes ASME construction available. 25

A.O. SMITH TO PERFECT FIT CONVERSION CHART A.O. SMITH PERFECT FIT Model Btu/Hr. Gal Model Btu/Hr. Gal Storage Tank Systems (**Unfired Storage Vessels) TJ-80(A) ** 80 ST80(A) ** 80 TJV-120M ** 120 ST120 ** 115 TJV-120A ** 120 ST120A ** 115 TJV-200 ** 200 ST175A ** 175 26

27

A.O. SMITH TO PERFECT FIT CONVERSION CHART A.O. SMITH PERFECT FIT Model kw Gal Model kw Gal Electric Light Duty and Point-of-Use Products DEL-6 S 2.5 Max 6 TEGSP6 6 Max 6 DEL-10 S 6 Max 10 TEGSP10 6 Max 10 DEL-15 S 6 Max 15 TEGSP15 6 Max 15 DEL-20 S 6 Max 20 TEGSP20 6 Max 20 DEN/DEL-30 D 12 Max 30 TELD/TELDS30 4.5/12 Max 30 DEN/DEL-40 D 12 Max 40 TELD/TELDS40 12 Max 40 DEN/DEL-52 D 12 Max 50 TELD/TELDS52 12 Max 50 DEN-66 D 12 Max 66 TELD66 12 Max 65 DEN-80 D 12 Max 80 TELD80 12 Max 80 DEN-120 D 12 Max 119 TELD120 12 Max 120 28

Electric Heavy Duty Products DRE/DVE-52 6 to 54 50 TES50/TE50 6 to 54 50 DRE/DVE-80 6 to 54 80 TES85/TE85 6 to 54 85 DRE/DVE-120 6 to 54 119 TES120/TE120 6 to 54 120 DSE-10 3 to 6 10 TE12A 3 to 9 13 DSE-20 3 to 18 20 TE20A 3 to 18 20 DSE-30 3 to 24 30 TE30A 3 to 36 30 DSE-40 3 to 36 40 TE40A 3 to 36 40 DSE-40 6 to 36 40 TE50A 6 to 54 50 DSE-50 6 to 45 50 TE50A 6 to 54 50 DSE-65 6 to 54 65 TE85A 6 to 54 85 DSE-80 6 to 54 80 TE85A 6 to 54 85 DSE-100 6 to 54 100 TE120A 6 to 54 120 DSE-120 6 to 54 120 TE120A 6 to 54 120 NOTE: DRE, DEL, DEN use surface mounted thermostats. DVE, DSE use immersion thermostats. NOTE: TES models use surface mounted thermostats. TE models use immersion thermostats. Electric Instantaneous/Booster Products CMC-5 6 to 54 5 TE10 6 to 54 10 SU-20 6 to 54 20 TE10 6 to 54 10 29

30 AMERICAN TO PERFECT FIT CONVERSION CHART AMERICAN PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height DCG32 Series 75T125-5N 125,000 75 28-1/4" 72" T75-125 125,000 75 26-1/4" 65-1/2" 36S145-6N 145,000 36 28-1/4" 50-5/8" T37-200 199,900 35 26-1/4" 49-1/4" 75T160-6N 160,000 75 28-1/4" 72" T82-156 156,000 82 26-1/4" 68-13/16" 80T180-6N 180,000 80 28-1/4" 71-7/8" T76-180 180,000 76 26-1/4" 68-13/16" 80T199-6N 199,999 80 28-1/4" 71-7/8" T76-200 199,900 76 26-1/4" 68-13/16" 98T199-6N 199,999 98 28-1/4" 82-7/8" T91-200 199,900 91 26-1/4" 76-5/16" 80T250-6N(A) 250,000 80 28-1/4" 71-7/8" T72-250(A) 250,000 72 26-1/4" 71-1/16" 98T250-6N(A) 250,000 98 28-1/4" 82-7/8" T100-250(A) 250,000 100 30-1/4" 73-1/4" 75T300-7N(A) 300,000 75 28-1/4" 74-1/2" T72-300(A) 300,000 72 26-1/4" 71" 65T370-8N(A) 370,000 65 28-1/4" 73-3/8" T65-360(A) 360,000 65 26-1/4" 70-11/16" 65T399-8N(A) 399,999 65 28-1/4" 73-3/8" T65-400(A) 399,900 65 26-1/4" 70-11/16" 80T425-10N(A) 425,000 80 28-1/4" 83" T85-400(A) 399,900 85 26-1/4" 78-13/16"

DCG31 Series 73T140-5N 140,000 73 28-1/4" 74-1/4" T82-156 156,000 82 26-1/4' 68-13/16" 76T180-6N 180,000 76 28-1/4" 74-1/4" T76-180 180,000 76 26-1/4" 68-13/16" 85S199-6N 199,999 85 30-1/4" 69" T76-200 199,900 76 26-1/4" 68-13/16" 100T199-6N 199,999 100 28-1/4" 78" T91-200 199,900 91 26-1/4" 76-5/16" 100S199-6N 199,999 100 30-1/4" 74-1/2" T100-200 199,900 100 30-1//4" 73-1/16" 100S250-6N(A) 250,000 100 30-1/4" 74-1/2" T100-250(A) 250,000 100 30-1/4" 73-1/4" 100S270-6N(A) 270,000 100 30-1/4" 74-1/2" T100-270(A) 270,000 100 30-1/4" 73-7/8" 100S300-7N(A) 300,000 100 30-1/4" 74-1/2" T100-310(A) 310,000 100 30-1/4" 75" 80L399-8N(A) 399,999 75 30-1/4" 71" T65-400(A) 399,900 65 26-1/4" 70-11/16" PVCG32 Series 50T63-3NV 63,500 50 22" 70" TPV75-75E 75,000 75 26-1/4" 68" 75T80-3NV 80,000 75 26" 70-1/2" TPV75-75E 75,000 75 26-1/4" 68" CG32 Series 75T75-4NV 74,500 75 26" 63-1/2" T75-75N 70,000 75 26-1/4" 64-3/8" 100T88-4NV 88,000 100 28-1/4" 68-11/16" T100-75(N) 75,000 100 26-1/4" 67-7/8" 31

AMERICAN TO PERFECT FIT CONVERSION CHART AMERICAN PERFECT FIT Model kw Gal Model kw Gal Electric Light Duty and Point-of-Use Products LDCE30D 12 Max 30 TELDS30 12 Max 30 LDCE40D 12 Max 40 TELD40 12 Max 40 LDCE50D 12 Max 50 TELD52 12 Max 50 LDCE65D 12 Max 65 TELD66 12 Max 65 LDCE80D 12 Max 80 TELD80 12 Max 80 LDCE119D 12 Max 119 TELD120 12 Max 120 32

Electric Heavy Duty Products ITCE/STCE-33 9 to 54 50 TES50/TE50 6 to 54 50 ITCE/STCE-33 9 to 54 80 TES85/TE85 6 to 54 85 ITCE/STCE-33 9 to 54 119 TES120/TE120 6 to 54 120 AITCE/ASTCE-33 9 to 54 119 TE120A 6 to 54 120 NOTE: STCE uses surface mounted thermostats. ITCE uses immersion thermostats. NOTE: TES models use surface mounted thermostats. TE models use immersion thermostats. Storage Tank Systems (**Unfired Storage Vessels) CST52-80T ** 80 ST80 ** 80 CST52-120T ** 119 ST120 ** 115 ACST52-120T ** 120 ST120A ** 115 ACST52-200T ** 200 ST175A ** 175 33

BRADFORD WHITE TO PERFECT FIT CONVERSION CHART 34 BRADFORD WHITE PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height T&S Series 75T-80 80,000 75 26" 63-3/4" T75-75N 75,000 75 26-1/4" 64-3/8" 100T-88 88,000 100 28-1/4" 68-5/8" T100-75 75,000 100 26-1/4" 67-7/8" D-75T-125-3N 125,000 75 28-1/4" 72-1/8" T75-125 125,000 75 26-1/4" 65-1/2" D-38T-155 155,000 38 28-1/4" 51" T37-200 199,900 35 26-1/4" 49-1/4" D-75T-160-3N 160,000 75 28-1/4" 72-1/8" T82-156 156,000 82 26-1/4" 68-13/16" D-80T-180-3N 180,000 80 28-1/4" 71-7/8" T76-180 180,000 76 26-1/4" 68-13/16" D-80T-199-3N 199,999 80 28-1/4" 71-7/8" T76-200 199,900 76 26-1/4" 68-13/16" D-100T-199-3N 199,999 98 28-1/4" 83" T91-200 199,900 91 26-1/4" 76-5/16" D-100S-199-3N 199,999 100 30-1/4" 74-1/4" T100-200 199,990 100 30-1/4" 73-1/16" D-80T-250-3N(A) 250,000 80 28-1/4" 71-7/8" T72-250(A) 250,000 72 26-1/4" 71-1/16" D-100S-250-3N(A) 250,000 100 30-1/4" 74-1/4" T100-250(A) 250,000 100 30-1/4" 73-1/4" D-100T-250-3N(A) 250,000 98 28-1/4" 83" T100-250(A) 250,000 100 30-1/4" 73-1/4" D-100S-270-3N(A) 270,000 100 30-1/4" 74-1/4" T100-270(A) 270,000 100 30-1/4" 73-7/8" D-75T-300-3N(A) 300,000 75 28-1/4" 74" T72-300(A) 300,000 72 26-1/4" 71" D-65T-370-3N(A) 370,000 65 28-1/4" 74" T65-360(A) 360,000 65 26-1/4" 70-11/16"

D-65T-399-3N(A) 399,999 65 28-1/4" 74" T65-400(A) 399,900 65 26-1/4" 70-11/16" D-80S-399-3N(A) 399,999 80 30-1/4" 77-1/4" T85-400(A) 399,900 85 26-1/4" 78-13/16" L Series D-100L-199 199,999 100 30-1/4" 74-3/4" T100-200 199,990 100 30-1/4" 73-1/16" D-100L-250(A) 250,000 100 30-1/4" 74-3/4" T100-250(A) 250,000 100 30-1/4" 73-1/4" D-100L-270(A) 270,000 100 30-1/4" 74-3/4" T100-270(A) 270,000 100 30-1/4" 73-7/8" D-100L-300(A) 300,000 100 30-1/4" 75-1/2" T100-310(A) 310,000 100 30-1/4" 75" D-80L-399(A) 399,999 80 30-1/4" 71" T65-400(A) 399,900 65 26-1/4" 70-11/16" TW & PDV Series TW50T-65-3N 65,000 48 22" 66-1/4" TPV75-75E 75,000 75 26-1/4" 68" TW75T-75-3N 75,000 75 26" 69-1/2" TPV75-75E 75,000 75 26-1/4" 68" 35

BRADFORD WHITE TO PERFECT FIT CONVERSION CHART BRADFORD WHITE PERFECT FIT Model Btu/Hr. Gal Model Btu/Hr. Gal Storage Tank Systems (**Unfired Storage Vessels) M-3-ST80R5 ** 80 ST80(A) ** 80 M-3-ST120R5 ** 119 ST120(A) ** 115 M-3-ST120R5(A) ** 119 ST120A ** 115 M-3-ST200R5(A) ** 200 ST175A ** 175 36

37

BRADFORD WHITE TO PERFECT FIT CONVERSION CHART BRADFORD WHITE PERFECT FIT Model kw Gal Model kw Gal Electric Heavy Duty Products 12A-KW-3 3 to 9 12 TE12A 3 to 9 12 20A-KW-3 3 to 18 20 TE20A 3 to 18 20 30A-KW-3 3 to 36 30 TE30A 3 to 36 30 40A-KW-3 3 to 36 40 TE40A 3 to 36 40 M-II-50SF/CF 6 to 54 50 TES/TE50(A) 6 to 54 50 M-II-80SF/CF 6 to 54 80 TES/TE85(A) 6 to 54 85 M-II-120SF/CF(A) 6 to 54 119 TES/TE120(A) 6 to 54 120 NOTE: SF uses surface mounted thermostats. CF uses immersion thermostats. NOTE: TES models use surface mounted thermostats. TE models use immersion thermostats. NOTE: (A) refers to ASME availability. Limited to TE products. Typical Perfect Fit Configuration: TE50-(kW) or TES50-(kW) If kw = 36; Example: TE50-36 or TES50-36 38 Electric Instantaneous/Booster Products L-I-6-3CF 6 to 58 5 TE10 6 to 54 10 Typical Bradford White Configuration: L-I-6-(kW)-3CF Example: L-I-6-36-3CF

Electric Light Duty and Point-of-Use Products LD-6U3-1CO15 1.5 Max 6 TEGSP6 6 Max 6 LD-12U3-1C015 1.5 Max 12 TEGSP10 6 Max 10 LD-20U3-1C015 6 Max 19 TEGSP20 6 Max 20 LD-30U3-1C015 6 Max 30 TEGSP30 6 Max 30 LD-30L3-3C045 12 Max 30 TELDS30 12 Max 30 LD-40L3-3CO45 12 Max 40 TELDS40 12 Max 40 LD-50L3-3C045 12 Max 50 TELDS52 12 Max 50 LD-WH6U3-1C015 1.5 Max 6 TEGSP6 6 Max 6 LD-WH12U3-1C015 1.5 Max 12 TEGSP10 6 Max 10 LD-WH20L3-1C015 6 Max 19 TEGSP20 6 Max 20 LD-WH30L3-1C015 6 Max 30 TEGSP30 6 Max 30 LD-40S3-3C045 12 Max 40 TELD40 12 Max 40 LD-50S3-3CO45 12 Max 50 TELD52 12 Max 50 LD-65R3-3C045 12 Max 65 TELD66 12 Max 65 LD-80R3-3C045 12 Max 80 TELD80 12 Max 80 LC-120R3-3C045 12 Max 120 TELD120 12 Max 120 39

LOCHINVAR TO PERFECT FIT CONVERSION CHART 40 LOCHINVAR PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height CNR Series CNR080-075 80,000 75 26" 63-3/4" T75-75N 75,000 75 26-1/4" 64-3/8" CNR090-100 88,000 100 28-1/4" 68-5/8" T100-75(N) 75,000 100 26-1/4" 67-7/8" CNR145-035-DF9 145,000 35 28-1/4' 50-5/8" T37-200 199,900 35 26-1/4" 49-1/4" CNR125-075-DF9 125,000 75 28-1/4" 72-1/8" T75-125 125,000 75 26-1/4" 65-1/2" CNR160-075-DF9 160,000 75 28-1/4" 72-1/8" T82-156 156,000 82 26-1/4" 68-13/16" CNR180-080-DF9 180,000 80 28-1/4" 71-7/8" T76-180 180,000 76 26-1/4" 68-13/16" CNR200-080-DF9 199,999 80 28-1/4" 71-7/8" T76-200 199,900 76 26-1/4" 68-13/16" CNR200-100-DF9 199,999 98 28-1/4" 83" T91-200 199,900 91 26-1/4" 76-5/16" CNR199-100-DF9 199,999 100 30-1/4" 74-1/4" T100-200 199,990 100 30-1/4" 73-1/16" CNR250-100-DF9 250,000 98 28-1/4" 83" T100-250 250,000 100 30-1/4" 73-1/4" CNR300-075-DF9 300,000 75 28-1/4" 74" T72-300 300,000 72 26-1/4" 71" CNR370-065-DF9 370,000 65 28-1/4" 74" T65-360 360,000 65 26-1/4" 70-11/16" CNR400-080-DF9 399,999 80 30-1/4" 77-1/4" T85-400 399,900 85 26-1/4" 78-13/16"

CNA (ASME) Series CNA251-100-DF9 250,000 98 28-1/4" 83" T100-250(A) 250,000 100 30-1/4" 73-1/4" CNA301-075-DF9 300,000 75 28-1/4" 74" T72-300(A) 300,000 72 26-1/4" 71" CNA371-065-DF9 370,000 65 28-1/4" 74" T65-360(A) 360,000 65 26-1/4" 70-11/16" CNA401-080-DF9 399,999 80 30-1/4" 77-1/4" T85-400(A) 399,900 85 26-1/4" 78-13/16" 41

LOCHINVAR TO PERFECT FIT CONVERSION CHART LOCHINVAR PERFECT FIT Model Btu/Hr. Gal Model Btu/Hr. Gal Gas Hot Water Supply Heaters Copper-Pak Products CPN180-85 180,000 85 T76-180 180,000 76 CPN199-85 199,000 85 T76-200 199,900 76 42 Storage Tank Systems (**Unfired Storage Vessels) RJS080 ** 78 ST80 ** 80 RJS085 ** 85 ST80 ** 80 RJS120 ** 119 ST120 ** 115 RJA120 ** 119 ST120A ** 115

43

LOCHINVAR TO PERFECT FIT CONVERSION CHART 44 LOCHINVAR PERFECT FIT Model kw Gal Model kw Gal Electric Light Duty and Point-of-Use Products ETX/ETW030KK 12 Max 30 TELD30 9 Max 30 ESX/ESW030KK 12 Max 30 TELDS30 12 Max 30 ETX/ETW040KK 12 Max 40 TELD40 12 Max 40 ESX/ESW040KK 12 Max 40 TELDS40 12 Max 40 ETX/ETW052KK 12 Max 50 TELD52 12 Max 50 ESX/ESW050KK 12 Max 50 TELDS52 12 Max 50 ETX/ETW066KK 12 Max 65 TELD66 12 Max 65 ETX/ETW082KK 12 Max 80 TELD80 12 Max 80 ETX/ETW120KK 12 Max 120 TELD120 12 Max 120 NOTE: ETX/ESX refers to 480 volt, 3 phase products. ETW/ESW refers to 277 volt, 1 phase products. NOTE: TELD/TELDS models are available in 208, 240, 277 or 480 volt (1 or 3 phase) configurations.

Electric Heavy Duty Products HS*(kW)-052 9 to 36 52 TES50 6 to 54 50 HS*(kW)-082 9 to 54 82 TES85 6 to 54 85 HS*(kW)-120(A) 9 to 54 118 TES120 6 to 54 120 HC*(kW)-052 9 to 36 52 TE50(A) 6 to 54 50 HC*(kW)-082 9 to 54 82 TE85(A) 6 to 54 85 HC*(kW)-120(A) 9 to 54 118 TE120(A) 6 to 54 120 Electric Instantaneous/Booster Products SB*-(kW) 6 to 58 5 TE10 6 to 54 10 Note: * Refers to voltage/phase: A 240 Volt, 1 Phase B 240 Volt, 3 Phase J 208 Volt, 1 Phase K 208 Volt, 3 Phase P 240 Volt, 1/3 Phase T 208 Volt, 1/3 Phase W 277 Volt, 1 Phase X 480 Volt, 3 Phase R Special - Must Specify 45

STATE TO PERFECT FIT CONVERSION CHART 46 STATE PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height Gas Water Heaters SBT75-75NE 75,100 75 26-1/4 67-1/2" T75-75N 75,000 75 26-1/4" 64-3/8" SBT100-75NE 75,100 100 28" 72" T100-75(N) 75,000 100 26-1/4" 67-7/8" SBF75-120NE 120,000 75 24" 76-3/4" T75-125 125,000 75 26-1/4" 65-1/2" SBF75-140NE 140,000 75 24" 76-3/4" T82-156 156,000 82 26-1/4" 68-13/16" SBF30-150NE 150,000 30 28" 49" T37-200 199,900 35 26-1/4" 49-1/4" SBF80-180NE 180,000 80 28" 73-1/2" T76-180 180,000 76 26-1/4" 68-13/16" SBF30-199NE 199,900 30 28" 49" T37-200 199,900 35 26-1/4" 49-1/4" SBF80-199NE 199,900 80 28" 73-1/2" T76-200 199,900 76 26-1/4" 68-13/16" SBF100-199NES 199,900 100 30-1/4" 71" T100-200 199,900 100 30-1/4" 73-1/16" SBF100-199NET 199,900 100 28" 83" T91-200 199,900 91 26-1/4" 76-5/16" SBF30-199NE 199,900 30 28" 49" T76-200 199,900 76 26-1/4" 68-13/16" SBF30-225NE(A) 225,000 30 28" 49" T72-250(A) 250,000 72 26-1/4" 71-1/16" SBF75-250NE(A) 250,000 75 28" 75" T72-250(A) 250,000 72 26-1/4" 71-1/16"

SBF100-260NES(A) 260,000 100 30-1/4" 74" T100-270(A) 270,000 100 30-1/4" 73-7/8" SBF100-260NET(A) 260,000 100 28" 84" T100-270(A) 270,000 100 30-1/4" 73-7/8" SBF75-300NE(A) 300,000 75 28" 75-1/2" T72-300(A) 300,000 72 26-1/4" 71" SBF70-360NE(A) 360,000 70 28" 72-3/4" T65-360(A) 360,000 65 26-1//4" 70-11/16" SBF100-400NE(A) 399,900 100 30-1/4" 77" T100-400(A) 399,900 100 30-1/4" 76" NOTE: (A) denotes ASME construction available. 47

STATE TO PERFECT FIT CONVERSION CHART 48 STATE PERFECT FIT Model kw Gal Model kw Gal Electric Point-of-Use and Light Duty Products CPE 6 10MSA 3.8 Max 6 TEGSP6 6 Max 6 CPE 10 10MSA 6 Max 10 TEGSP10 6 Max 10 CPE 17 10MSA 6 Max 17 TEGSP15 6 Max 15 CPE 20 10MSA 6 Max 20 TEGSP20 6 Max 20 CPE 30 10MSA 12 Max 30 TEGSP30 6 Max 30 CPE 40 20LSA 12 Max 40 TELDS40 12 Max 40 CPE 50 20LSA 12 Max 47 TELDS52 12 Max 50 CPE 30 20RTA 12 Max 30 TELD30 9 Max 30 CPE 40 20RTA 12 Max 40 TELD40 12 Max 40 CPE 52 20RTA 12 Max 50 TELD50 12 Max 50 CPE 66 20RTA 12 Max 66 TELD66 12 Max 65 CPE 82 20RTA 12 Max 82 TELD80 12 Max 80 CPE 120 20RTA 12 Max 119 TELD120 12 Max 120

Electric Heavy Duty Products SB6-10 3 to 9 10 TE12A 3 to 9 12 SB6-20 3 to 18 20 TE20A 3 to 18 20 SB6-30 3 to 36 30 TE30A 3 to 36 30 SB6-40 3 to 36 40 TE40A 3 to 36 40 SB6-52-(kW)**(A) 6 to 81 52 TES50/TE50(A) 6 to 54 50 SB6-82-(kW)**(A) 6 to 81 82 TES85/TE85(A) 6 to 54 85 SB6-120-(kW)**(A) 6 to 81 119 TES120/TE120(A) 6 to 54 120 NOTE: ** Refers to SFE which uses surface mounted thermostats. IFE uses immersion thermostats. NOTE: TES models use surface mounted thermostats. TE models use immersion thermostats. Storage Tank Systems (**Unfired Storage Vessels) PV-82-0ORT(A) ** 82 ST80(A) ** 80 PV-120-0ORT(A) ** 119 ST120(A) ** 115 PV-200-0ORTA ** 200 ST175A ** 175 49

Customer Service Division Office 334-260-1500 Customer Service 1-800-621-5622 Warranty, Parts 1-800-621-5622 Fax 1-800-535-9538 International Sales 334-260-1596 Fax 334-260-1535 Technical Service (1-800-432-8373) 1-800-HEATER3 Website www.rheem.com Perfect Fit Commercial A DIVISION OF RHEEM WATER HEATING Rheem Heating, Cooling & Water Heating 101 Bell Road Montgomery, AL 36117-4305 In keeping with its policy of continuous progress and product improvement, Perfect Fit reserves the right to make changes without notice. Printed in U.S.A. 07/08 WP TX-338 Rev. 7 1-800-HEATER3