Controller. DMX controller. Driver LED. Alimentatori LED LED Power supply. Dimmer



Similar documents
ALIMENTATORI LED DRIVER LED

LED Power. Power Supplies for constant current HI-POWER LEDs 350/700mA Alimentatori per LED in corrente costante HI-POWER 350/700mA 82206/700

CATALOGO LED / LED CATALOGUE

Alimentatori LED LED drivers

n N e E 0 m A R sr S l /01

DESCRIZIONE DESCRIPTION

B12 INTERRUTTORI DI PROSSIMITA INDUTTIVI PUSH-PULL STANDARD SERIE SERIES INDUCTIVE PROXIMITY SWITCHES PUSH-PULL STANDARD B12

serie FX3 e FX4 - FX3 and FX4 series

C01 INTERRUTTORI DI PROSSIMITA INDUTTIVI AMPLIFICATI A DUE FILI IN CORRENTE ALTERNATA SERIE SERIES

Anelli Rings (1) (1) (2) (2) (3) TIPI - TYPES CARATTERISTICHE FEATURES. 1mm 3 24Vdc 10 30Vdc 10 30Vdc 10% 10% 200 ma.

SERIE FX3 e FX4 - FX3 and FX4 SERIES

M A X IP40 IK03. Sistema lineare professionale per illuminazione a luce diretta o indiretta per interni

Accessories. Power Supply. Stripes. YourLED/ Function. Flex-Connector 10cm Flex-Connector 100cm Power Supply 15W 230/12V DC. YourLED Stripe 975mm

VOLKSWAGEN. Mascherine per Autoradio Radio Mounting Plate M M M TT M ISO

Controlers. Controler

PRESE -SPINE -CAVI A NORME ISO sockets plugs cables ISO standard

analog SENSORI INDUTTIVI ANALOGICI inductive analog sensors

L ordine perfet to. In perfect order. Attuatore elettrico a stelo per apertura e chiusura di finestre a sporgere, a lamelle, pale frangisole e cupole

4 IN 5 OUT MATRIX SWITCHER YUV & Stereo Audio

INTERRUTTORI DI PROSSIMITA INDUTTIVI IN MINIATURA INDUCTIVE PROXIMITY SWITCHES MINIATURE SERIES

c-pro nano RACK & c-pro micro RACK

RF-SERVER. ZETAQLAB wireless system control Server Server di controllo del sistema wireless ZETAQLAB. Features. Caratteristiche.

ALIMENTAZIONE POWER SUPPLY

IP66. Apparecchio a incasso calpestabile per interni ed esterni. Walk over recessed fixture for indoor and outdoor applications

INGROUND LED LINE 549 mm. INGROUND LED LINE 1025 mm LED LINE BAR

CONTATORE ENEL MONOFASE/TRIFASE CONTATORE TRIFASE DI ENERGIA ELETTRICA FIGURA 1: SCHEMA DI INSTALLAZIONE

cedim A ON/OFF Diflex da incasso Built-in Diflex IP20 LED Diflex da superficie Surface mount Diflex IP20 LED

DMX512 Switch (stand alone mode) DALI Touch Dimmer Switch

Noise Equipment for Building Acoustics Measurements

COLLEZIONE COLLECTION. APPARECCHI DA INTERNO da pag. 2 a pag. 47 INDOOR APPLIANCES

16 ZONE WIRELESS SISTEMA DI SICUREZZA CASA ALLARME AUTO-DIALER

Basics of Dimming. ISC Learning Centre

DESCRIPTION DESCRIZIONE

185 WESTBOURNE GROVE LONDON W11 2SB APPLICATION FOR ADVERTISEMENT CONSENT

*N.B.: le lunghezze riportate sono da intendere passaggio aria VERNICIATURA: Colori RAL : + 15% Altri colori: prezzi a richiesta

Inspired LED Price List

LED Spots & Bulbs MR16

LED LENTI E CABLAGGI LED LENSES AND CABLES

MODEL COLOR PPROTECTION CCT / λd LEDs - LUMINOUS FLUX. HS6N-60W12 BIANCO FREDDO - COOL WHITE IP /6500 K 580 Lumens / m

Bianco Neutro / Neutral White. (colore disponibile su richiesta / colour available on demand) Verde Mela / Green Apple

8Q PRQGR GL FRQWHQLWRUL $ ZRUOG RI HQFORVXUHV

Access point PoE Gigabit wireless da 300Mbps

LED Sign Module. LED Super Tiny Strip. LED Accessories. LED Power Supply

Programmatori a spina Plug programmer. Prese multiple mobili Multiple mobile sockets

LED LIGHTING CATALOG 2014 vol.1. Dimmer Power Supplies

EVX 800 series is a range of controllers for the management of blast chillers.

Auerhaan / Palagi energiezuinige verlichting

SAFE TOP OPEN. Sistema di chiusura Locking system

CBC (EUROPE) Srl NOTA APPLICATIVA

7 - Modules and sistems for PLC

Serie ET / ET Series

S-M series, connectors with modular inserts Serie S-M, connettori con inserti modulari 12.01

BLACKLIGHT RADIANT HEATER BLACKLIGHT TECNOLOGIA RADIANTE

CAVI CANDELA ignition cables

GELMI RANGE ROUND SHAPE

GEKKO R. design Serge & Robert Cornelissen

SISTEMA ANTE EVO 2 DOOR SYSTEM EVO 2

ACCESSORI ACCESSORIES

Catalog Flexible LED Strips and Accessories 2014

Catalogo prodotti LED LED product catalogue LED Katalog

EC-TOUCH. RGB LED Controller

TERMINAL TACTIL A COLOR CON PLC INTEGRADO Pag 2. TERMINAL TACTIL MONOCROMO CON PLC INTEGRADO Pag 4. PANEL OPERADOR CON PLC INTEGRADO Pag 9

C.S.E. Nodi Tipici Parametrizzati al /04/2015 Copyright (c) Castalia srl

FOTOCELLULE CILINDRICHE M18 CON FIBRE OTTICHE TASTEGGIO DIRETTO E SBARRAMENTO

PASSASPINA E VASCHETTE CANCELLERIA CABLE HOLDERS AND STATIONERY TRAYS

SERVOMOTORI BRUSHLESS BRUSHLESS SERVOMOTORS

CATALOGO 2008 UPGRADE METAFORM

MADE IN ITALY. Sistemi di connessione per fotovoltaico Connection systems for photovoltaic. TÜV certification EN 50521:2008 SC3

Il vano lampada è accessibile tramite gli elementi di chiusura senza l uso di alcun attrezzo.

FX3 - FX4 SERIES. SENSORI FOTOELETTRICI A FIBRA OTTICA - SERIE FX FX series - photoelectric sensors FOR OPTICAL FIBRES FX3/0P-0A

ACCESS CONTROL SECURITY SYSTEMS TRANSMITTERS SHOW-WINDOWS PROTECTION COMPONENTS FOR GATES AUTOMATION

A 906 MANUALE PER IL PERSONALE TECNICO SERVICE MANUAL. Includes: Comprende: - Exploded view with spare parts list - Electric diagram

ELETTRONICA DUE FOTEK. T i p o a t a st e g g i o / Reflex type. T i p o a b a r r i e r a / Thru beam type

1 x 2,5W LED Anodo comune. alimentazione esterna external power supply. 350 ma 700mA. CW = 160 Lumen (*)

SWITCH! DESCRIPTION. ENVIRONMENTAL SPECIFICATIONS Operating Temperature: 0 C to +40 C SPECIFICATION SHEET:

Vasche. Bathtub. Sense 3

TruPower-Portable-500W. Solar Starter kit

12V Dimmable Driver EL-TMDRVR

ALIMENTATORI SWITCHING MONOFASE DA 75W CON FUNZIONE PFC 75W, SINGLE PHASE, SWITCHING POWER SUPPLY WITH PFC FUNCTION

Led & Design. Anteprima collezione Preview collection

SVC400P/SVC800P. 4/8 Camera Live Tracking Vehicle DVR Installation Manual. Version 1.0

SAFE. DESIGNED in italy CASSEFORTI PER HOTEL HOTEL SAFES

news L A L U C E L E D P R E N D E F O R M A 2009

PROGRAMMA CORSO DI LOGIC PRO 9

AUTOMOTIVE LED LIGHT CATALOG

NX 16 SR / X A N - A 0 00

Solar Home System. User Manual. AEH-SHS01-10W2L Solar Home System 2 Lamps

DALI DIM/CONVERTER CONTROL (DC NV) 1 10V (0-10 V) analog DALI Converter with (Multi-) Sensor-control and 1 and 2-Switch dim functions

Start Up Delay PC Board P/N CM By-pass Switch P/N CM Metal bracket Warning Label

162 CB CABLE TRACER. Filter Probe & Tone Generator INSTRUCTION MANUAL

Sassari, Via Fermi, 33 - Tel. 079/

12VDC MAGNETIC LED DIMMABLE POWER SUPPLIES SPEC SHEET DIGEST

Nuovi domini di primo livello - Registra nuove estensioni con FabsWeb_HOST

Inductive Proximity Sensors

1247 Norwood Avenue, Itasca, IL (800)

RPS. Sanitary sampling valves SAMPLING

DECORATIVE RANGES PENDANTS FLUSH FITTINGS WALL LIGHTS TABLE & FLOOR BATHROOM SPOTLIGHTS & DOWNLIGHTS LED STRIPLIGHTS OUTDOOR LED LIGHTING

Sensori induttivi conformi alle norme DIN CENELEC EN EN NAMUR (3) CARATTERISTICHE FEATURES. 2mm 3 24 Vdc 10%

Catalogue Products 2012

MACCHINE DA CAFFE' AUTOMATICA AUTOMATIC COFFEE MACHINES

Transcription:

02 Controller DMX controller Driver LED Alimentatori LED LED Power supply Dimmer 02

Controller Controller RGB Controller PUT CTF001.00 12-24V 12-24V 4A x 3ch 144W (12V) / 288W (24V) RGB controller con uscita in tensione per strip LED RGB, telecomando RF. Funzioni: - ON-OFF; - Selezione e regolazione intensità luminosa dei singoli colori preimpostati; - Rotazione colori e giochi preimpostati con regolazione di velocità; - Memoria ultima funzione eseguita. RGB Controller with Voltage Output for RGB LED Strip, RF remote control. Functions: - ON-OFF; - Single color selection ready setted, and luminous intensity control; - Color rotation and setted colors with speed adjustment; - Memory of the last function performed. Nota: schema di collegamento vedi sez. Info Tecniche Cap08 / Connection diagram see Info Tecniche Cap08 RGB Amplifier PUT CTA001.00 12-24V 12-24V 4A x 3ch 144W (12V) / 288W (24V) Amplificatore di segnale per RGB controller. Può essere anche usato per led strip singolo colore. Amplifier for RGB controller.can be used for single color led strips too. Nota: schema di collegamento vedi sez. Info Tecniche Cap08 / Connection diagram see Info Tecniche Cap08 Capitolo 02 - Catalogo LED 2014 EA srl 87 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller RGB Controller CTF002.00 12-24V 12-24V 3A x 3ch 108W (12V) / 216W (24V) RGB controller con uscita in tensione per strip LED RGB, telecomando RF con funzione sensor, sfiorando la ghiera cromatica si possono cambiare le tonalità di colore. Il controller mantiene in memoria l ultima funzione eseguita. Funzioni: - ON/OFF; - Selezione colori e regolazione intensità luminosa; - Giochi di luce preimpostati con regolazione di velocità; - Doppi comandi sulla base, funzione risparmio batterie telecomando quando non usato. RGB Controller with constant voltage output for RGB LED Strip, RF remote control with sensor, touching the dial color you can change the color. Memory of last function performed. Functions: - ON/OFF; - Selection of colors and light intensity; - Games preset light with speed control; - Dual controls on the base, batteries energy saving. Nota: schema di collegamento vedi sez. Info Tecniche Cap08 / Connection diagram see Info Tecniche Cap08 Capitolo 02 - Catalogo LED 2014 EA srl 88 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller CTF003.00 12-24V 12-24V 4A x 3ch 144W (12V) / 288W (24V) RGB Controller con tecnologia WIFI, utilizzabile con telecomando e/o smartphone con piattaforma Android e IOS. Portata in ambienti chiusi 50 metri, 100 all aperto. Funzioni: - ON/OFF; - Selezione colori e regolazione intensità luminosa; - Giochi di luce preimpostati con regolazione di velocità; - Funzione risparmio batterie telecomando quando non usato. RGB Controller with WIFI technology for use with remote control and / or smartphone platform Android and IOS. Reach 50 meters indoors, 100 outdoors. Functions: - ON/OFF; - Selection of colors and light intensity; - Games preset light with speed control; - Batteries energy saving. Esempio schema di collegamento Wiring connection example Capitolo 02 - Catalogo LED 2014 EA srl 89 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller DMX001.00 12-24V 3 CMOS open drain 4A x 3ch 144W (12V) / 288W (24V) RGB Controller DMX 512, uscita in tensione per strip LED RGB. Possibilità di impostare l indirizzo DMX, giochi e colori preimpostati tramite dip-switch. Questo dispositivo può essere usato in abbinamento al driver DC/DC codice DRF... per ottenere una uscita in corrente costante. Vedi schema di collegamento Cap08. RGB DMX 512 controller, voltage output for RGB LED Strip. Ability to set the DMX address, games and preset colors with dip-switch. This device can be used in combination with the driver DC / DC code DRF... to obtain a constant current output. For wiring connection see Cap08 Esempio schema di collegamento Wiring connection example Capitolo 02 - Catalogo LED 2014 EA srl 90 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller PUT CTT008.01 12~24V 0~12 / 0~24V 10A 120W (12V) / 240W (24V) Control dimmer in tensione per strip LED 1Ch, telecomando con tecnologia RF. Funzioni: - ON/OFF; - Regolazione intensità luminosa sfiorando la ghiera monocromatica o gli appositi tasti; - Tasti di selezione dell intensità luminosa preimpostata, 25/50/75/100%; - Tasto di settaggio per abbinare più telecomandi ad un controller; - Memoria ultima funzione eseguita. Voltage control dimmer for LED strip 1Ch, RF remote control. Functions: - ON/OFF; - Adjust brightness by touching the monochrome ring; - Selection buttons light intensity preset, 25/50/75/100%; - Button setting for operation with one or more remote controls; - Memory of last function performed. Capitolo 02 - Catalogo LED 2014 EA srl 91 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller Ø 14mm PUT CTT002.00 12V 0~12V 4A 48W Control dimmer in tensione per strip LED 1Ch, fornito con cavi da cm 100. Sensore touch con LED blu integrato, corpo trasparente. Funzioni: interruttore ON-OFF e dimmer 0/100 % Voltage control dimmer for LED strip 1Ch, supplied with cables cm 100. Blu LED sensor, transparent case. Functions: switch ON-OFF and dimmer 0/100 % Ø 14mm PUT CTT002.01 12V 0~12V 1A 12W Mini control dimmer in tensione per strip LED 1Ch, fornito con cavi da cm 100, sensore touch con LED blu integrato Funzioni: interruttore ON-OFF e dimmer 0/100 % Voltage control dimmer for LED strip 1Ch, supplied with cables cm 100, blu LED inside. Functions: switch ON-OFF and dimmer 0/100 % Capitolo 02 - Catalogo LED 2014 EA srl 92 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller PUT CTT004.00 12-24V 12V / 24V 8A 96W (12V) / 192W (24V) Dimmer con uscita in tensione per strip LED 1Ch, potenziometro integrato e telecomando tecnologia IR. Funzioni: interruttore ON-OFF e dimmer 0/100 % Voltage control dimmer for LED strip 1Ch with integrated potentiometer and IR remote control. Features: switch ON-OFF and dimmer 0/100 % Esempio schema di collegamento Wiring connection example Capitolo 02 - Catalogo LED 2014 EA srl 93 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller IR Sensor PUT 12-24V 12V / 24V 3A (12V) / 2A (24V) 36W (12V) / 48W (24V) IR Control dimmer con uscita in tensione per strip LED 1Ch, LED blu di indicazione stato integrato. Da 24W a 48W necessita di dissipazione. Disponibile con le tipologie di firmware riportate nella tabella, altre personalizzazioni o funzionalità a richiesta. IR Control dimmer with voltage output for LED strip 1 Ch, blue LED indicator state integrated. 24W to 48W requires dissipation. Provided with the types of firmware shown in the table, other customizations or functionalities on request. DIMMER 5~100% ON/OFF Soft ON/OFF Fast FUNCTION CTT003.0300... Low distance 1~3mm CTT003.0307... High distance 2~6mm CTT003.0301... CTT003.0302... CTT003.0303... CTT003.0304... Inverted logic* *Tensione in uscita (Out) al carico sempre attiva al 100% della Vin; quando il sensore IR rileva una presenza l uscita (Out) al carico diventa OFF. Questo dispositivo, ad esempio, può essere utilizzato come interruttore per le ante dei mobili. *Voltage output (Out) to the load always active to 100% of Vin; when the IR sensor detects a presence, the output becomes OFF. This device may be used as a switch for the forniture doors. Esempio schema di collegamento Wiring connection example CONSTANT VOLTAGE IN Capitolo 02 - Catalogo LED 2014 EA srl 94 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller Metal Touch PUT 12-24V 12V / 24V 8A 96W (12V) / 192W (24V) Control dimmer con sensore capacitivo, uscita in tensione per strip LED 1Ch. LED blu di indicazione stato integrato a richiesta. Oltre 5A necessita di dissipazione. Disponibile con le tipologie di firmware riportate nella tabella, altre personalizzazioni o funzionalità a richiesta. Capacitive control dimmer with voltage output fore LED strip 1 Ch. blue LED indicator state integrated on request. Over 5A requires dissipation. Provided with the types of firmware shown in the table, other customizations or functionalities on request. DIMMER 5~100% STEP DIMMER (%) ON/OFF Soft ON/OFF Fast CTT007.0400... ON-100-50-OFF CTT007.0401... ON-100-50-25-3-OFF CTT007.0402... CTT007.0403... CTT007.0404... Esempio schema di collegamento Wiring connection example CONSTANT VOLTAGE Ingresso da collegare alla struttura della lampada Metal Touch Input to lamp structure Per un corretto funzionamento isolare il circuito dalla struttura. For a right work the circuit must be insulated from the lamp body. IN Capitolo 02 - Catalogo LED 2014 EA srl 95 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller Glass Touch PUT 12-24V 12V / 24V 8A-12V / 5A-24V 96W-12V / 120W-24V Control dimmer con sensore capacitivo, uscita in tensione. LED blu di indicazione stato integrato a richiesta. Oltre 5A necessita di dissipazione. Disponibile con le tipologie di firmware riportate nella tabella, altre personalizzazioni o funzionalità a richiesta. Capacitive control dimmer with voltage output. blue LED indicator state integrated on request. Over 5A requires dissipation. Provided with the types of firmware shown in the table, other customizations or functionalities on request. DIMMER 5~100% STEP DIMMER (%) ON/OFF Soft ON/OFF Fast CTT010AX.0600B CTT010AX.0601B CTT010AX.0602B CTT010AX.0603B CTT010AX.0604B CTT010AX.0605B Esempio schema di collegamento Wiring connection example CONSTANT VOLTAGE Capitolo 02 - Catalogo LED 2014 EA srl 96 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller Touch Button PUT 12-24V 12V / 24V 8A 96W (12V) / 192W (24V) Control dimmer con sensore Touch, uscita in tensione per strip LED 1Ch, LED blu di indicazione stato integrato nel sensore. Assemblato con guaina termoretraibile. Oltre 5A necessita di dissipazione. Disponibile con le tipologie di firmware riportate nella tabella, altre personalizzazioni o funzionalità a richiesta. Lunghezza cavo sensore cm 100, cavi IN/ cm 25, altri a richiesta. Capacitive Touch control dimmer with voltage output, for LED strip 1 Ch, touch button sensor, blue LED indicator state integrated. Assembled with heat-shrink sheath. Over 5A requires dissipation. Provided with the types of firmware shown in the table, other customizations or functionalities on request. Sensor cable length 100 cm, cable IN/ cm 25, others on request. DIMMER 5~100% STEP DIMMER (%) ON/OFF Soft ON/OFF Fast CTT007.0400B.84041 ON-100-50-OFF CTT007.0401B.84041 CTT007.0402B.84041 CTT007.0403B.84041 ON-100-50-25-3-OFF CTT007.0404B.84041 Capitolo 02 - Catalogo LED 2014 EA srl 97 LED Catalogue 2014 EA srl - Chapter 02

Controller Controller Metal Touch + Driver Output PUT () MAX V Load if Vin = 12V MAX V Load if Vin = 24V 12-24V 350mA 9,6V 21,6V 12-24V 500mA 9,6V 21,6V 12-24V 700mA 9,6V 21,6V Control dimmer con sensore capacitivo, uscita in corrente costante. Disponibile con le tipologie di firmware riportate nella tabella, altre personalizzazioni e LED blu di indicazione stato integrato su richiesta. La tensione (Vf) del carico applicato deve essere max 9,6V, se la tensione in ingresso è 12V, e 21,6V se la tensione in ingresso è 24V. Oltre 5A necessita di dissipazione. Capacitive control dimmer with constant current output. Provided with the types of firmware shown in the table, other customizations or blue LED indicator state integrated on request. The voltage (Vf) of the applied load must be max 9.6 V, if the input voltage is 12V, and 21.6V, if the input voltage is 24V. Over 5A requires dissipation. CTC005.35.0501... CTC005.35.0502... CTC005.50.0501... CTC005.50.0502... CTC005.70.0501... CTC005.70.0502... DIMMER 5~100% ON/OFF Soft Schema di collegamento Wiring connection CONSTANT CURRENT LED Ingresso da collegare alla struttura della lampada Metal Touch Input to lamp structure Per un corretto funzionamento isolare il circuito dalla struttura. For a right work the circuit must be insulated from the lamp body. IN Capitolo 02 - Catalogo LED 2014 EA srl 98 LED Catalogue 2014 EA srl - Chapter 02

Driver DC-DC DC-DC Driver Driver DC-DC PUT () MAX V Load if Vin = 12V MAX W Load if Vin = 12V MAX V Load if Vin = 24V MAX W Load if Vin = 24V DRC0350008.W7001 12-24V 350mA 9,6V 3,36W 21,6V 7,6W DRC0500012.W7001 12-24V 500mA 9,6V 4,8W 21,6V 10,8W DRC0700016.W7001 12-24V 700mA 9,6V 6,72W 21,6V 15W LED Driver DC/DC (Step-Down), ingresso 12-24V, uscita in corrente costante. Cavi FEP-AWG22 cm 20, altre lunghezze a richiesta. La tensione (Vf) del carico applicato deve essere max 9,6V se la tensione in ingresso è 12V e 21,6V se la tensione in ingresso è 24V. LED driver DC/DC (Step-Down), input 12-24V, output constant current. Cm 20, FEP-AWG22 cables, others lenght on request. The voltage (Vf) of the applied load must be max 9.6 V if the input voltage is 12V and 21.6V if the input voltage is 24V. Driver DC-DC PWM Dimmable PUT () MAX V Load if Vin = 12V MAX W Load if Vin = 12V MAX V Load if Vin = 24V MAX W Load if Vin = 24V DRD0350008.W8001 12-24V 350mA 9,6V 3,36W 21,6V 7,6W DRD0500012.W8001 12-24V 500mA 9,6V 4,8W 21,6V 10,8W DRD0700016.W8001 12-24V 700mA 9,6V 6,72W 21,6V 15W LED Driver DC/DC (Step-Down), ingresso 12-24V, uscita in corrente costante, dimmerabile PWM. Cavi FEP-AWG22 cm 20, altre lunghezze a richiesta. La tensione (Vf) del carico applicato deve essere max 9,6V se la tensione in ingresso è 12V e 21,6V se la tensione in ingresso è 24V. Se il cavo di dimmerazione non è utilizzato collegarlo al polo negativo (-) LED driver DC/DC (Step-Down), input 12-24V, output constant current, PWM dimmable. Cm 20, FEP-AWG22 cables, others lenght on request. The voltage (Vf) of the applied load must be max 9.6 V if the input voltage is 12V and 21.6V if the input voltage is 24V. If dimming cable not used connect to GND (-). Esempio di collegamento Assembling example Input 12~24 Vdc PWM Dimmer Capitolo 02 - Catalogo LED 2014 EA srl 99 LED Catalogue 2014 EA srl - Chapter 02

Driver DC-DC DC-DC Driver 3Ch Driver DC-DC PWM Dimmable MAX V Load if Vin = 24V DRF0200... 24 3ch x 200mA 21,6 DRF0350... 24 3ch x 350mA 21,6 DRF0500... 24 3ch x 500mA 21,6 DRF0700... 24 3ch x 700mA 21,6 LED Driver DC/DC ingresso in tensione, tre uscite in corrente costante dimmerabili, cavo cm 20, altre lunghezze a richiesta. LED Driver DC/DC, input constant voltage, output 3xdimmable constant current, 20 cm cable, other lengths on request. Esempio schema di collegamento Wiring connection example Capitolo 02 - Catalogo LED 2014 EA srl 100 LED Catalogue 2014 EA srl - Chapter 02

Driver DC-DC DC-DC Driver /PUT Max (V) HOT-PLUG CURRENT Max Vf LOAD Range (V) HPG001 48 1 11~15* /PUT Max (V) HOT-PLUG CURRENT Max Vf LOAD Range (V) HPG002 48 1 11~15* Circuito di protezione da sovratensioni dovute al collegamento a caldo di circuiti LED a driver collegati alla rete. Indicato, ad esempio, quando si usano interruttori ON/OFF sul cavo in uscita dal driver o per driver che non hanno il soft start. * Altre tensioni di carico a richiesta. LED s Protection circuit from voltage surges caused by hot plugging to driver connected to the network. Indicated, for example, when using ON/OFF switches on the output cable from the driver, or for driver without soft start. * Others Vf LOAD Range on request. Capitolo 02 - Catalogo LED 2014 EA srl 101 LED Catalogue 2014 EA srl - Chapter 02

Driver 350 ma 350 ma Driver 3,7W DRN0350003.050 100~240V 0,5-10,5V 350mA 0~3,7W LED driver corrente costante 350 ma resinato. Cavi PVC-AWG22, lunghezza cm 20. LED driver 350 ma constant current resinate case. Cm 20, PVC-AWG22 cables. 6,3W DRN0350004.050 200~240VV 0-18 350mA 0~6,3W LED driver corrente costante 350 ma. Morsetti a vite. LED driver 350 ma constant current. Screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 102 LED Catalogue 2014 EA srl - Chapter 02

Driver 350 ma 350 ma Driver 6W Super Slim - H 10mm DRN0350006.240 200~240V 0~17,5V 350mA 0~6W Super SLIM LED driver corrente costante 350 ma. Classe II, morsetti a vite, possibilità di connessione rapida con jack maschio (CNT011.00 vedi capitolo 5). Super SLIM LED driver 350 ma constant current. Class II, screw terminal, possibility of quick connection with DC male jack (CNT011.00 see Chapter 5). Esempio di collegamento con jack maschio per tutti i modelli slim 6-12 Watt Assembling example with DC male jack for all slim models 6-12 Watt Capitolo 02 - Catalogo LED 2014 EA srl 103 LED Catalogue 2014 EA srl - Chapter 02

Driver 350 ma 350 ma Driver 12W Super Slim - H 10mm DRN0350012.240 200~240V 0~34V 350mA 0~12W Super SLIM LED driver corrente costante 350 ma. Classe II, morsetti a vite, possibilità di connessione rapida con jack maschio (CNT011.00 vedi capitolo 5). Super SLIM LED driver 350 ma constant current.class II, screw terminal, possibility of quick connect with DC male jack (CNT011.00 see Chapter 5). 15W Slim - H 13mm DRN0350015.240 200~240V 28~43V 350mA 10~15W SLIM LED driver corrente costante 350 ma. Classe II, morsetti a vite. SLIM LED driver 350 ma constant current. Class II, screw terminal. 20W Slim - H 15mm DRN0350020.240 200~240V 30~56V 350mA 11~20W SLIM LED driver corrente costante 350 ma. Classe II, morsetti a vite. SLIM LED driver 350 ma constant current. Class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 104 LED Catalogue 2014 EA srl - Chapter 02

Driver 350 ma 350 ma Driver 25W Triac Dimmable DRD0350025.220 100~240V 40~58V 350mA 14~20W LED driver corrente costante 350 ma dimmerabile con triac. Cavi cm 15. Classe II. LED driver 350 ma constant current, triac dimmable. Cable lenght cm 15. Class II protection. Capitolo 02 - Catalogo LED 2014 EA srl 105 LED Catalogue 2014 EA srl - Chapter 02

Driver 350 ma spina integrata 350 ma driver wallmount 9W COLOR DRS0350009.170 Transparent 220-240V 9~30V 350mA 3~9W DRS0350009.171 Black 220-240V 9~30V 350mA 3~9W LED driver corrente costante 350 ma. Spina Italia integrata. Cavo di collegamento da ordinare separatamente. Wall Mount LED driver 350 ma constant current. Integrated Italian plug. Exit cable to be ordered separately. A B COLOR TYPE LENGTH CAV008.01 Transparent 2x0,75 PVC+PVC 250 cm CAV008.02 Black 2x0,75 PVC+PVC 250 cm CAV008.21 Black 2x0,75 PVC+PVC 200 cm CAV015.00 Black 2x0,50 PVC+PVC 200 cm Cavo di collegamento con connettore integrato per LED-DRIVER. Su specifiche del cliente è possibile applicare l interruttore sul cavo. Exit cable with integrated connector for Wall Mount LED-DRIVER. On request it s possible to assemble a switch on the cable. A = con interruttore / with switch - B = solo cavo / only cable Capitolo 02 - Catalogo LED 2014 EA srl 106 LED Catalogue 2014 EA srl - Chapter 02

Driver 500 ma 500 ma Driver DRN0500006.170 200~240V 3~12V 500mA 1,5~6W LED driver corrente costante 500 ma. Morsetti a vite. LED driver 500 ma constant current. Screw terminal. 6W 8W Slim - H 20mm DRN0500008.240 200~240V 8~16V 500mA 4~8W SLIM LED driver corrente costante 500 ma. Classe II, morsetti a vite. SLIM LED driver 500 ma constant current.class II, screw terminal. 12W Super Slim - H 10mm DRN0500012.240 200~240V 0~24V 500mA 0~12W Super SLIM LED driver corrente costante 500 ma. Classe II, morsetti a vite, possibilità di connessione rapida con jack maschio (CNT011.00 vedi capitolo 5). Super SLIM LED driver 500 ma constant current.class II, screw terminal, possibility of quick connect with DC male jack (CNT011.00 see Chapter 5). Capitolo 02 - Catalogo LED 2014 EA srl 107 LED Catalogue 2014 EA srl - Chapter 02

Driver 500 ma 500 ma Driver 15W Slim - H 14mm DRN0500015.240 200~240V 20~30V 500mA 10~15W SLIM LED driver corrente costante 500 ma. Classe II, morsetti a vite. SLIM LED driver 500 ma constant current.class II, screw terminal. 20W Slim - H 15mm DRN0500020.240 200~240V 22~40V 500mA 11~20W SLIM LED driver corrente costante 500 ma. Classe II, morsetti a vite. SLIM LED driver 500 ma constant current.class II, screw terminal. 30W Slim - H 18mm DRN0500030.240 200~240V 30~60V 500mA 15~30W SLIM LED driver corrente costante 500 ma. Classe II, morsetti a vite. SLIM LED driver 500 ma constant current.class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 108 LED Catalogue 2014 EA srl - Chapter 02

Driver 500 ma 500 ma Driver 50W H 22mm DRN0500050.240 200~240V 50~100V 500mA 25~50W LED driver corrente costante 500 ma. Classe II, morsetti a vite. LED driver 500 ma constant current.class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 109 LED Catalogue 2014 EA srl - Chapter 02

Driver 500 ma spina integrata 500 ma driver wallmount COLOR DRS0500012.240 Black 200~240V 12~24V 500mA 6~12W DRS0500012.241 Transparent 200~240V 12~24V 500mA 6~12W LED driver corrente costante 500 ma. Spina Italia integrata. Cavo di collegamento da ordinare separatamente. Wall Mount LED driver 500 ma constant current. Integrated Italian plug. Exit cable to be ordered separately. A B COLOR TYPE LENGTH CAV008.01 Transparent 2x0,75 PVC+PVC 250 cm CAV008.02 Black 2x0,75 PVC+PVC 250 cm CAV008.21 Black 2x0,75 PVC+PVC 200 cm CAV015.00 Black 2x0,50 PVC+PVC 200 cm Cavo di collegamento con connettore integrato per LED-DRIVER. Su specifiche del cliente è possibile applicare l interruttore sul cavo. Exit cable with integrated connector for Wall Mount LED-DRIVER. On request it s possible to assemble a switch on the cable. A = con interruttore / with switch - B = solo cavo / only cable Capitolo 02 - Catalogo LED 2014 EA srl 110 LED Catalogue 2014 EA srl - Chapter 02

Driver 700 ma 700 ma Driver DRN0700003.050 100~240V 0,5~4V 700mA 1~3W LED driver corrente costante 700 ma resinato. Cavi PVC-AWG22, lunghezza cm 20. LED driver 700 ma constant current resinate case. Cm 20, PVC-AWG22 cables. 3W DRN0700006.170 200~240V 3~12V 700mA 2~6W LED driver corrente costante 700 ma. Morsetti a vite. LED driver 700 ma constant current. Screw terminal. 6W 8W Slim - H 20mm DRN0700008.240 200~240V 6~12V 700mA 5~8W SLIM LED driver corrente costante 700 ma. Classe II, morsetti a vite. SLIM LED driver 700 ma constant current. Class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 111 LED Catalogue 2014 EA srl - Chapter 02

Driver 700 ma 700 ma Driver 12W Super Slim - H 10mm DRN0700012.240 200~240V 0~17V 700mA 0~12W Super SLIM LED driver corrente costante 700 ma. Classe II, morsetti a vite, possibilità di connessione rapida con jack maschio (CNT011.00 vedi capitolo 5). Super SLIM LED driver 700 ma constant current.class II, screw terminal, possibility of quick connect with DC male jack (CNT011.00 see Chapter 5). 15W Slim - H 19mm DRN0700015.240 200~240V 15~21V 700mA 10~15W SLIM LED driver corrente costante 700 ma. Classe II, morsetti a vite. SLIM LED driver 700 ma constant current. Class II, screw terminal. 20W Slim - H 15mm DRN0700020.240 200~240V 15~29V 700mA 10~20W SLIM LED driver corrente costante 700 ma. Classe II, morsetti a vite. SLIM LED driver 700 ma constant current. Class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 112 LED Catalogue 2014 EA srl - Chapter 02

Driver 700 ma 700 ma Driver 30W Slim - H 18mm DRN0700030.240 200~240V 21,4~42,8V 700mA 15~30W SLIM LED driver corrente costante 700 ma. Classe II, morsetti a vite. SLIM LED driver 700 ma constant current.class II, screw terminal. 50W H 22mm DRN0700050.240 200~240V 36~72V 700mA 25~50W LED driver corrente costante 700 ma. Classe II, morsetti a vite. LED driver 700 ma constant current. Class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 113 LED Catalogue 2014 EA srl - Chapter 02

Driver 700 ma 700 ma Driver 25W Triac Dimmable DRD0700025.220 180~295V 24~36V 700mA 17~25W LED driver corrente costante 700 ma dimmerabile con triac. Cavi cm 15. Classe II. LED driver 700 ma constant current, triac dimmable. Cable lenght cm 15. Class II protection. Capitolo 02 - Catalogo LED 2014 EA srl 114 LED Catalogue 2014 EA srl - Chapter 02

Driver 700 ma spina integrata 700 ma driver wallmount 9W COLOR DRS070009.170 Transparent 220~240V 3~15V 700mA 3~9W DRS070009.171 Black 220~240V 3~15V 700mA 3~9W LED driver corrente costante 700 ma. Spina Italia integrata. Cavo di collegamento da ordinare separatamente. Wall Mount LED driver 700 ma constant current. Integrated Italian plug. Exit cable to be ordered separately. A B COLOR TYPE LENGTH CAV008.01 Transparent 2x0,75 PVC+PVC 250 cm CAV008.02 Black 2x0,75 PVC+PVC 250 cm CAV008.21 Black 2x0,75 PVC+PVC 200 cm CAV015.00 Black 2x0,50 PVC+PVC 200 cm Cavo di collegamento con connettore integrato per LED-DRIVER. Su specifiche del cliente è possibile applicare l interruttore sul cavo. Exit cable with integrated connector for Wall Mount LED-DRIVER. On request it s possible to assemble a switch on the cable. A = con interruttore / with switch - B = solo cavo / only cable COLOR DRS0700015.300 Black 100~240V 24V 700mA 0~15W LED driver corrente costante 700 ma, con spina USA integrata. Cavo cm 200 con DC plug Ø 5,5. Wall Mount LED driver 700 ma constant current. Integrated USA plug. Exit cable cm 200, DC plug Ø 5,5 Capitolo 02 - Catalogo LED 2014 EA srl 115 LED Catalogue 2014 EA srl - Chapter 02

Driver multifunzione Multifunction Driver DRM1050040.220 180~295V 40W Multifunction 2~100V 350mA 42W 2~80V 500mA 42W 2~67V 600mA 42W 2~57V 700mA 42W 2~45V 900mA 42W 2~40V 1050mA 42W LED driver corrente costante selezionabile mediante dip-switch da 350mA a 1050mA, interfaccia DALI e funzione push dimming. Classe II. LED driver with output currente level selectable by dip-switch from 350mA to 1050mA, built-in DALI interface and push dimming function. Class II protection. 60W Multifunction 2~90V 500mA 1~45W 2~90V 600mA 1~54W DRM1400060.220 180~295V 2~86V 700mA 1~60W 2~67V 900mA 1~60W 2~57V 1050mA 1~60W 2~42V 1400mA 1~60W LED driver corrente costante selezionabile mediante dip-switch da 500mA a 1400mA, interfaccia DALI e funzione push dimming. Classe II. LED driver with output currente level selectable by dip-switch, built-in DALI interface and push dimming function. Class II protection. Capitolo 02 - Catalogo LED 2014 EA srl 116 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED 12V 12V LED Power supply (ma) ALN012005.050 200~240V 12V 420 5W Alimentatore 12V, 420 ma. Morsetti a vite Power supply 12V, 420 ma. Screw terminal. 5W 6W Super Slim - H 10mm (ma) ALN012006.240 200~240V 12V 500 6W Super SLIM, alimentatore 12V, 500 ma. Classe II, morsetti a vite, possibilità di connessione rapida con jack maschio (CNT011.00 vedi capitolo 5). Super SLIM,power supply 12V, 500 ma. Class II, screw terminal, possibility of quick connect with DC male jack (CNT011.00 see Chapter 5). 12W Super Slim - H 10mm ALN012012.240 200~240V 12V 1A 12W Super SLIM, alimentatore 12V, 1 A. Classe II, morsetti a vite, possibilità di connessione rapida con jack maschio (CNT011.00 vedi capitolo 5). Super SLIM,power supply 12V, 1 A. Class II, screw terminal, possibility of quick connect with DC male jack (CNT011.00 see Chapter 5). Capitolo 02 - Catalogo LED 2014 EA srl 117 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED 12V 12V LED Power supply 15W Slim - H 19mm ALN012015.240 200~240V 12V 1,25A 15W SLIM, alimentatore 12V, 1,25 A. Classe II, morsetti a vite SLIM, power supply 12V, 1,25 A. Class II, screw terminal. 20W Slim - H 15mm ALN012020.240 200~240V 12V 1,67A 20W SLIM, alimentatore 12V, 1,67 A. Classe II, morsetti a vite SLIM, power supply 12V, 1,67 A. Class II, screw terminal. 30W Slim - H 18mm ALN012030.240 200~240V 12V 2,5A 30W SLIM, alimentatore 12V, 2,5 A. Classe II, morsetti a vite SLIM, power supply 12V, 2,5 A. Class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 118 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED 12V 12V LED Power supply ALN012050.240 200~240V 12 4,17A 50W Alimentatore 12V, 4,17 A. Classe II, morsetti a vite. Power supply 12V, 4,17 A. Class II, screw terminal. 50W H 22mm 50W H 22mm ALN012050.246 100~240V 12 4,16A 50W Alimentatore 12V, 4,17 A. Classe II, morsetti a vite. Power supply 12V, 4,17 A. Class II, screw terminal. 75W H 31mm ALN012075.240 200~240V 12V 6,25A 75W Super SLIM, alimentatore 12V, 6,25 A. Classe II, morsetti a vite Super SLIM, power supply 12V, 6,25 A. Class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 119 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori multifunzione Multifunction Power supply 20W Adjustable current A ALN012020.220 100~240V 12V 1,6 A 20W Alimentatore 12V, uscita in corrente regolabile 0~1,6A quando la Vf del carico è compresa tra i 9~12V. Cavi IN/ cm 30. Power Supply 12V, output 0~1,6A adjustable within Vf load 9~12V. Cables IN/ cm 30. 60W Adjustable voltage and current A ALN012030.220 100~240V 12V 2,5 A 30W Alimentatore 12V, range di corrente regolabile 1,87~2,57A, range di tensione regolabile 11,4~13,2V. Power Supply 12V, current adjustable range 1,87~2,57A, voltage adjustable range 11,4~13,2V. 60W Adjustable voltage and current A ALN012060.220 200~240V 12V 5,0 A 60W Alimentatore 12V, range di corrente regolabile 3,75~5,15A, range di tensione regolabile 11,5~13V. Power Supply 12V, current adjustable range 3,75~5,15A, voltage adjustable range 11,5~13V. Capitolo 02 - Catalogo LED 2014 EA srl 120 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED 24V 24V LED Power supply (ma) ALN024006.050 200~240V 24V 250 6W Alimentatore 24V, 250 ma. Morsetti a vite Power supply 24V, 250 ma. Screw terminal. 5W 8W Slim - H 20mm ALN024008.240 200~240V 24V 0,33A 8W SLIM, alimentatore 24V, 0,33 A. Classe II, morsetti a vite. SLIM, power supply 24V, 0,33 A. Class II, screw terminal. 15W Slim - H 19mm ALN024015.240 200~240V 24V 0,625A 15W SLIM, alimentatore 24V, 0,625 A. Classe II, morsetti a vite. SLIM, power supply 24V, 0,625 A. Class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 121 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED 24V 24V LED Power supply 20W Slim - H 15mm ALN024020.240 200~240V 24V 0,84A 20W SLIM, alimentatore 24V, 0,84 A. Classe II, morsetti a vite. SLIM, power supply 24V, 0,84 A. Class II, screw terminal. 30W Slim - H 18mm ALN024030.240 100~240V 24V 1,25A 30W SLIM, alimentatore 24V, 1,25 A. Classe II, morsetti a vite. SLIM, power supply 24V, 1,25 A. Class II, screw terminal. 30W Slim - H 16mm ALN024030.242 200~240V 24V 1,25A 30W SLIM, alimentatore 24V, 1,25 A. Classe II, morsetti a vite. SLIM, power supply 24V, 1,25 A. Class II, screw terminal. Capitolo 02 - Catalogo LED 2014 EA srl 122 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED 24V 24V LED Power supply ALN024050.240 200~240V 24V 2,08A 50W Alimentatore 24V, 2,08 A. Classe II, morsetti a vite. Power supply 24V, 2,08 A. Class II, screw terminal. 50W H 22mm 75W H 30mm ALN024075.240 200~240V 24V 3,12A 75W Alimentatore 24V, 3,12 A. Classe II, morsetti a vite. Power supply 24V, 3,12 A. Class II, screw terminal. 96W A ALN024100.220 100~240V 24V 4,0 A 70~96W Alimentatore 24V, regolabile in tensione (-15%) e in corrente (-25%). Morsetti a vite. Powert supply 24V, voltage (-15%) and current (-25%) adjustable. Screw terminals. Capitolo 02 - Catalogo LED 2014 EA srl 123 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED LED Power supply DIMENSIONS L x P x H ALG012025.220 100-240V 12V 2A 25W 78x51x28 ALG012035.220 100-240V 12V 2,9A 30W 99x82x35 ALG012050.220 100-240V 12V 4,2A 50W 99x97x36 ALG012075.220 100-240V 12V 6,25A 75W 129x98x38 ALG012100.220 100-240V 12V 8,3A 100W 159x97x38 ALG012150.220 100-240V 12V 12,5A 150W 199x98x38 ALG012200.220 100-240V 12V 16,5A 200W 210x98x50 ALG024025.220 100-240V 24V 1,1A 25W 78x51x28 ALG024035.220 100-240V 24V 1,5A 30W 99x82x35 ALG024050.220 100-240V 24V 2,2A 50W 99x97x36 ALG024075.220 100-240V 24V 3,2A 75W 129x98x38 ALG024100.220 100-240V 24V 4,5A 100W 159x97x38 ALG024150.220 100-240V 24V 6,5A 150W 199x98x38 ALG024200.220 100-240V 24V 8,3A 200W 215x115x30 Alimentatore 12V e 24V. Morsetti a vite Power supply 12V and 24V. Screw terminal. DIMENSIONS L x P x H ALS012066.190 100~240V 12V 5,5A 66W 110 x 50,4 x 30 ALS012150.190 100~240V 12V 12,5A 150W 173 x 72 x 42 Alimentatore 12V, cavo di alimentazione con spina Italia e connettore maschio DC Ø 5,5. Power supply 12V, power cord with Italian plug and DC male connector Ø 5.5. Capitolo 02 - Catalogo LED 2014 EA srl 124 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED spina integrata Wallmount LED power supply 24V 6W COLOR ALS024006.170 Black 220~240V 24V 0,25A 6W Alimentatore 24VDC. Spina Italia integrata. Cavo di collegamento da ordinare separatamente. Wall Mount LED power supply 24VDC. Integrated Italian plug. Exit cable to be ordered separately. 12V 12W COLOR ALS012012.040 Black 220~240V 12V 1A 12W Alimentatore 12VDC. Spina Italia integrata. Cavo di collegamento da ordinare separatamente. Wall Mount LED power supply 12VDC. Integrated Italian plug. Exit cable to be ordered separately. A B COLOR TYPE LENGTH CAV008.01 Transparent 2x0,75 PVC+PVC 250 cm CAV008.02 Black 2x0,75 PVC+PVC 250 cm CAV008.21 Black 2x0,75 PVC+PVC 200 cm CAV015.00 Black 2x0,50 PVC+PVC 200 cm Cavo di collegamento con connettore integrato per alimentatori LED. Su specifiche del cliente è possibile applicare l interruttore sul cavo. Exit cable with integrated connector for Wall Mount LED power supply. On request it s possible to assemble a switch on the cable. A = con interruttore / with switch - B = solo cavo / only cable Capitolo 02 - Catalogo LED 2014 EA srl 125 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED spina integrata Wallmount LED power supply 12W 12-24V COLOR ALS012012.240 Black 220~240V 12V 1A 12W ALS012012.241 Transparent 220~240V 12V 1A 12W ALS024012.240 Black 220~240V 24V 0,5A 12W ALS024012.241 Transparent 220~240V 24V 0,5A 12W Alimentatore 12 e 24VDC. Spina Italia integrata. Cavo di collegamento da ordinare separatamente. Wall Mount LED power supply 12 e 24VDC. Integrated Italian plug. Exit cable to be ordered separately. A B COLOR TYPE LENGTH CAV008.01 Transparent 2x0,75 PVC+PVC 250 cm CAV008.02 Black 2x0,75 PVC+PVC 250 cm CAV008.21 Black 2x0,75 PVC+PVC 200 cm CAV015.00 Black 2x0,50 PVC+PVC 200 cm Cavo di collegamento con connettore integrato per alimentatori LED. Su specifiche del cliente è possibile applicare l interruttore sul cavo. Exit cable with integrated connector for Wall Mount LED power supply. On request it s possible to assemble a switch on the cable. A = con interruttore / with switch - B = solo cavo / only cable Capitolo 02 - Catalogo LED 2014 EA srl 126 LED Catalogue 2014 EA srl - Chapter 02

Alimentatori LED Waterproof Waterproof LED power supply DIMENSIONS L x P x H ALW012030.180 170~250V 12V 2,5A 30W 222 x 31 x 20,5 ALW012045.180 170~250V 12V 3,75A 45W 253 x 40 x 22 Alimentatore waterproof 12VDC. Cavi lunghezza cm 20. Waterproof power supply 12VDC. Cables length cm 20. ALW012060.180 110-250V 12V 5A 60 W Alimentatore waterproof 12VDC, 5 A, 2 cavi in uscita. Waterproof power supply 12VDC, 5 A, 2 exit cable. Capitolo 02 - Catalogo LED 2014 EA srl 127 LED Catalogue 2014 EA srl - Chapter 02

Capitolo 02 - Catalogo LED 2014 EA srl 128 LED Catalogue 2014 EA srl - Chapter 02