July 9 Course Catalog 2013 Camstar Release 5
Table of Contents General Information... 1 Camstar Course Descriptions... 3 Orientation Training Track... 3 Exploring Camstar Manufacturing... 3 Exploring Camstar Manufacturing Feature Modules... 4 Exploring Camstar Quality - Nonconformance Management... 5 Exploring Camstar Quality - Event Management... 5 Camstar Implementation Methodology... 6 Camstar Reporting Methodology... 6 System Developer / Maintainer Training Track... 7 Object Design... 7 Portal Studio User... 8 Web Forms Builder... 9 Recommended Training Tracks by Role... 10 Semiconductor Suite...11 Exploring Camstar Semiconductor Suite...11 Semiconductor Suite: SPC...12 Electronics Suite...13 Exploring Camstar Electronics Suite...13 Electronics Suite: SPC...14 Education Quick Start Programs... 15 Camstar Installation:...15 Enterprise Platform Server installation...15 Camstar Interoperability:...16 Enterprise Integration...16 Equipment Integration...16 Programming APIs...17 Camstar Intelligence:...18 Reporting Quickstart...18 Camstar SPC Quickstart...19 Business Logic:...20 Object Model Extensions in Designer...20 User Interface (Portal Assistance)...20 Portal Configuration Quickstart...20 Quickstart Training Classes... 21 Advanced Object Design...21 Introduction to Camstar Open Adapter...22 Portal Studio Developer...23 Camstar Cell Controller Installation and Configuration...24 Camstar Installation and Configuration...25 Camstar Enterprise Platform Administration...26 Bridge Training (4.5 to 5.1)...28 Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page ii
General Information Camstar Education Services offer quality coursework to support customer needs on all capabilities of the products within the Camstar Enterprise Platform. Instructor led training and interactive course labs provide the knowledge and skills needed by customers to implement solutions to business needs using Camstar s. Camstar education is developed for core members of the implementation team, including: modelers, designers, developers, and managers. Courses provide focused, hands-on training and are presented as: Classroom Presentation and Demonstration Instructor Lectures / Discussion Interactive Labs Case Studies The Exploring level courses are intended for all members of a customer project team; and teach the basics of the out of the box functionality of the s. Other courses within the curriculum(s) teach specific skills or are related to product supporting technology that will allow you to more deeply understand and use the Power of Camstar to configure a solution to meet your specific business requirements. Training Plans are tailored to customer needs as part of the implementation project. All classes are taught by certified instructors. Camstar recommends three training tracks for a typical project team s resources: Orientation Training Track This track is recommended for the entire customer project team. The focus of the Orientation Training is: To familiarize attendees with Camstar terminology. To teach attendees navigation skills within the applications. To familiarize attendees with the configurable objects used to define a factory model and execute transactions on it. This includes a heavy emphasis on Object relationships (how the objects fit together as building blocks to construct a model to meet functional requirements on the shopfloor). The Orientation Training includes the Exploring Camstar Manufacturing and the appropriate training units from the Exploring Camstar Features Modules. Also included is the Camstar Implementation Methodology course. This course provides instruction on the methodology Camstar uses to support customer project engagements. This track is executed early in the project (often pre-kickoff). Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 1 2013 Camstar release 5 Course Catalog V2.4.docx
System Developer /Maintainer Training Track This track teaches specific skills needed by staff involved in technical areas of the project, i.e. Interface and Report developers. The System Developer/Maintainer Training includes the Object Design and Portal Studio User and Developer courses. This track builds on the Orientation Track, which should have been completed previously. This track may be delayed until well into the project depending upon the roles customer personnel will assume during the initial implementation. System Administrator Training Track This track is recommended for IT Administrative staff. The System Administrator Training includes the Camstar Enterprise Platform Administration class. This class is typically taught by a Camstar IT professional at your facility during installation and configuration of Camstar on your production servers. This track is typically executed in conjunction with hardware availability and environment setup. We also offer the Camstar Installation and Configuration course. This course may be needed if your organization plans to stand up a training or testing sandbox environment. This course is required if you plan to host Camstar classes at your facility. Open Enrollment Scheduled classes are taught at the Camstar Education Center in Charlotte, North Carolina and Penang, Malaysia. The schedule is posted on the Camstar Website Education pages. Classes can also be taught onsite at customer or partner locations. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 2
Camstar Course Descriptions Orientation Training Track Exploring Camstar Manufacturing Who Should Take this Course When to Take this Course Topics Covered This course provides a basic understanding of the out of the box objects to model the Camstar Manufacturing application, the transactions provided by Camstar to track production, and key capabilities to expand the basic model to provide material control, resource tracking, task processing, data collection, and more. Camstar Manufacturing All members of the project implementation team At or near project kick off None 3 days Modeling Navigation in the Web Application The Factory Information Model (Physical and Process) Camstar Tracking and Control Capabilities Workflow Modeling and alternate routes Users, Roles, and Permissions Menu Structure User Codes and Object Groups Modeling Audit Trail Transactions Navigation in the Camstar Portal The Shop Floor Execution Model Review of basic (most frequently used) transactions Transactions that change attributes or status of WIP Options for user centric work space Searching in Camstar Manufacturing Audit Trail Expanding the model Bill of Materials and material control on the shop floor Bill of Process to establish overrides Work in Process Messages based on model attributes Viewing documents and collecting data Breakdown of work as tasks in task lists to define user specific electronic procedures Resource Tracking This course is the foundation and prerequisite for all courses in the Camstar Manufacturing curriculum. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 3
The Camstar Manufacturing product includes a series of optional modules that may be purchased individually or within an Industry Suite. Individual mini courses have been developed to allow training configuration to meet specific customer configurations. The Feature Modules are listed below. Exploring Camstar Manufacturing Feature Modules Who Should Take this Course When to Take this Course Dispatch Management Electronic Signature Label Printing Maintenance Management Operator Training and Certification The optional modules enabled with Camstar Manufacturing can be purchased as part of a package or as individual modules with base product. To accommodate this possibility, each optional module in Camstar Manufacturing has a stand-alone training unit. Camstar Manufacturing TM All members of the project implementation team. At or near project kick off with Exploring Camstar Manufacturing Exploring Camstar Manufacturing Variable depending on software purchased Each of the Modules is described below. The Dispatch Management course teaches the methods to setup rules for Dispatching of Container starts from Mfg Orders and to control movement of Containers based on User configured rules associated with manufacturing process. The Electronic Signatures course teaches the methods to setup requirements for signatures that denote accountability during execution of transactions associated with manufacturing process. Discover how Electronic Signatures can be applied to definition of Modeling data as well as shop floor transaction data. The Label Printing course is designed to teach the methods to setup Labels for printing of Camstar Manufacturing data associated with manufacturing process. The Maintenance Management course is designed to teach the methods to setup regular and/or conditional maintenance within Camstar Manufacturing for equipment (resource) associated with manufacturing process. The Operator Training and Certification course is designed to teach the methods to set up an Operators training requirements and validate their certification to perform work associated with manufacturing process. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 4
Exploring Camstar Quality - Nonconformance Management Who Should Take this Course When to Take this Course Topics Covered This course provides a basic understanding of the out of the box objects to model the Camstar Quality solution. Camstar Quality All members of the project implementation team At or near project kick off Exploring Camstar Manufacturing 1 day Modeling and Quality Record creation and management The Organization object, foundation of the quality model Camstar Quality Control Capabilities Required and optional modeling to support quality records creation and management This course covers the modeling components and the out of the box pages provided by Camstar to record and manage nonconformances in production. It covers the required and optional components for recording production events and the configurations to support managing quality data records from observation through investigation, root cause analysis, and disposition of affected materials. Exploring Camstar Quality - Event Management Who Should Take this Course When to Take this Course Topics Covered This course provides a basic understanding of the out of the box objects to model the Camstar Quality solution. Camstar Quality All members of the project implementation team At or near project kick off Exploring Camstar Manufacturing 1 day Modeling and Quality Record creation and management The Organization object, foundation of the quality model Camstar Quality Control Capabilities Required and optional modeling to support quality records creation and management This course covers the modeling components and the out of the box pages provided by Camstar to record and manage generic quality events. It covers a generic model for recording any type of quality event and the configurations to support managing quality data records from observation through investigation, root cause analysis, and corrective action. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 5
Camstar Implementation Methodology This is a presentation style training that introduces Camstar s proven approach to Implementation Methodology. This class is generally presented via LiveMeeting, or may be taught on site at customer locations during project kick off activities. All Camstar s Who Should Take this Course The Entire project team When to Take this Course Early in project engagement None 4 hrs Topics Covered Iterative approach to projects Methodology (phases and documents) Implementation approach Quality Plans Camstar Reporting Methodology This course provides an overview of the Camstar Reporting solution to prepare customer project teams earaly in an engagement Camstar Intelligence TM Who Should Take this Course Core members of an implementation team involved with implementing the reporting component of a system, including system designer or developers. Report Administrators, Report Developers When to Take this Course Early in project cycle when making decisions about the product implementation. It is important to understand Camstar s reporting solution to insure that the solution design and build of your system to implement includes the data on which reporting is required. Exploring Camstar Manufacturing course 4 hrs Topics Covered Demonstration of Camstar reporting components to include: Embedded Crystal Reports Configuration of KPIs Embedded KPIs Camstar Reporting Universe Camstar Standard Reports Report Design Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 6
System Developer / Maintainer Training Track Object Design This course provides a basic understanding of the Camstar Object Model and use of the Designer Application to modify and extend the objects. Camstar Enterprise Platform TM ; Camstar Manufacturing TM ; Camstar Quality TM ; Camstar Intelligence TM Who Should Take this Course Designers and developers of the core implementation team with technical knowledge and understanding of object oriented concepts When to Take this Course At or near the build phase of the project Exploring Camstar Manufacturing course, or 6 months hands-on experience 3 days Topics Covered Review concepts of Object Design Understand relationships among classes using Unified Modeling Language (UML) diagrams Learn the functionality of Camstar Manufacturing Configurable Data Objects (CDOs) and Configurable Logic Flows (CLFs) Perform various transactions within Camstar Manufacturing Designer Customize Camstar Manufacturing transactions Learn techniques for setting and retrieving field values Understand Camstar Export Import capability using the Structure Generation page Introduction to Camstar Unified Expression syntax (used by User Query, User Label, Business Rules, Auto-numbering, and other Camstar objects). Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 7
Portal Studio User This course introduces the Camstar Portal Studio, a self-contained development and configuration tool used with Camstar s Portal. This course provides a basic understanding of the Camstar Portal Studio concentrating on navigation, design and development of shop floor and inquiry service pages and deployment of portal pages. Attendees will learn about the various controls and their properties provided out of the box on Camstar product installation and about the use of smart scanning to enable the use of barcode scanning in your implementation of Camstar. Portal Studio User is the first in a series of classes available for Camstar customers and partners to learn the new technology and direction of the Camstar Enterprise Platform. Camstar Enterprise Platform TM ; Camstar Manufacturing TM ; Camstar Quality TM ; Camstar Intelligence TM Who Should Take this Course Business Analysts with an understanding of basic user interfaces Designers and Developers of the core implementation team with technical knowledge and understanding of complex, custom user interfaces. When to Take this Course At or near the build phase of the project Exploring Camstar Manufacturing course 2 days Topics Covered Camstar Portal Studio overview Portal Menu Definitions Portal Page Components and Controls Portal Page Design for Shop Floor Services Enabling Smart Scanning Portal Page Design for Inquiry Services Deployment and Maintenance of Portal Pages Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 8
Web Forms Builder This course provides a basic understanding of the Camstar Web Forms Builder integrated development environment with Visual Studio. Camstar Manufacturing Who Should Take this Course Designers and developers of the core implementation team with technical knowledge and understanding of custom user interfaces When to Take this Course At or near the build phase of the project Exploring Camstar Manufacturing course, Object Design course Visual Studio.NET experience, Microsoft VB.NET and ASP.NET programming skills. 2 days Topics Covered Camstar Manufacturing Web Application overview Web Forms Design for Shop Floor Services Web Forms Design for Maintenance and Inquiry Services Camstar Manufacturing Web Services and XML Schema Deployment and Maintenance of Web Forms Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 9
Recommended Training Tracks by Role The starting point for the core MES curriculum is Exploring Camstar Manufacturing. This course is prerequisite for other courses within the curriculum. Recommended Training Tracks by Role Core Team Members Web Form or Portal UI Developers Business Logic Developers Integration Developers SPC Specialist Report Developers Validation Specialists *Exploring Camstar Manufacturing R R R R R R R R Exploring Camstar Features R+ R+ R+ R+ R+ R+ R+ R+ Camstar Implementation Methodology OR OR OR OR OR OR OR OR Exploring CQ - Nonconformance Management OR+ OR+ OR+ OR+ OR+ OR+ OR+ OR+ Exploring CQ - Event Management OR+ OR+ OR+ OR+ OR+ OR+ OR+ OR+ Object Design OR R R R R R Portal Studio - User R R R Camstar Quickstart Programs Operational Reporting Quickstart R+ Integration Quickstart R+ Camstar SPC Quickstart R+ Programming with Camstar Quickstart OR Designer Quickstart OR Portal Development Quickstart OR Camstar Installation & Configuration OR Camstar Enterprise Platform Administration R Legend R R+ OR OR+ Class is required in this role toward certification Class is required in this role toward certification and dependent on a purchased Camstar Licensed module Class is not required in this role, but is recommended Class is not required in this role, but is recommended and dependent on a purchased Camstar Licensed module System Administrators Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 10
Semiconductor Suite Camstar provides the following training classes on the Semiconductor Suite to assist our customers in understanding the use of this accelerator on base Camstar Manufacturing. Exploring Camstar Semiconductor Suite This course provides basic understanding of the Camstar solution for Semiconductor Manufacturers. Camstar Manufacturing TM Who Should Take this Course All members of the project implementation team. When to Take this Course At or near project kick off Exploring Camstar Manufacturing Familiar with Semiconductor Manufacturing processes 3 days Topics Covered Semi Suite Overview Factory Model, Process Model, Work Order & Schedule, Process Spec, WIP Processing, Equipment Processing and Access Control. Modeling Structure Setup A, Setup B (Highest Matching Algorithm), Modeling Sequence and Initial Setup. Inventory Tracking Start, Move, Ship, Impound, Loaning and Lot Form. Scheduling Transactions Schedule, Preparation, Release, Modify, Request and Request Cancel. WIP Tracking WIP Main, Materials Tracking, Rejects Recording, Bins Recording, Test Parameters, Data Collection, Yield Handling, Disposition, Tools, Carriers, Batch Processing, etc. Ad-Hoc Transactions Hold, Further Hold, Release, Lot Modifications, Split, Combine, etc. Job Control Transactions Job Model, Job Order and Job Transactions. Part Management Transactions Part Maintenance and Part Request. Inquiry Transactions Online Query, Online Traveler, View Lot Status and System Info. Special consideration This course is generally taught in conjunction with Exploring Camstar Manufacturing to provide an overall understanding of the out of the box capability of the product and the configured Semiconductor Accelerator. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 11
Semiconductor Suite: SPC (Feature) This course provides basic understanding of the Camstar solution for Semiconductor Manufacturers using Semiconductor Suite SPC. Camstar Manufacturing TM Who Should Take this Course All members of the SPC project implementation team. When to Take this Course At or near project kick off with the Exploring Semi course Exploring Semiconductor Suite Familiar with Semiconductor Manufacturing processes Familiar with Statit Custom QC and Statit e-server 1 day add on to Exploring Semi Topics Covered Semi Suite SPC Overview SPC Model, SPC Execution and SPC Execution Architecture. SPC Modeling Modeling Sequence and review of all SPC objects. SPC Execution During Track Out, WIP Data, Job Progress, Ad- Hoc WIP Data and Ad-Hoc SPC. SPC Runtime Data SPC Txn Data and SPC Txn Data Point for Annotation, Exclusions and Override Value. SPC Records Search and update executed SPC charts. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 12
Electronics Suite Camstar provides the following training classes on the Electronics Suite to assist our customers in understanding the use of this accelerator on base Camstar Manufacturing. Exploring Camstar Electronics Suite This course provides basic understanding of the Camstar solution for Electronics Manufacturers. Camstar Manufacturing TM Who Should Take this Course All members of the project implementation team. When to Take this Course At or near project kick off Exploring Camstar Manufacturing Familiar with Electronics Manufacturing processes 3 days Topics Covered Electronics Suite Overview Security Control, Process Control, Resource Control, Feeder Control, Tool Control, Workflow Control, & BOM Management, Mfg Line Verification, Conversion, Sampling, SPC Control, Status Model Control, Job Control, Part Management, etc. Modeling Structure Modeling A, Modeling B (Highest Matching Algorithm), Modeling Sequence and Initial Setup. Initial Setup Physical Model, Factory and Employee. Start Transactions Start, Mfg Order Start, Mfg Order Reassign, Two-Level Start and Order Dispatch. Processing Transactions Part 1 Operational View, TDA, Mfg Line Verification, Feeder Control and Tool Control. Processing Transactions Part 2 Conversion, Sampling, Yield Limits Control, Criteria Based Setup and Change Qty by Grid. Job Control Transactions Job Model, Job Order and Job Transactions. Part Management Transactions Part Maintenance and Part Request Inquiry Transactions Online Query, Online Traveler and System Info. Special consideration This course is generally taught in conjunction with Exploring Camstar Manufacturing to provide an overall understanding of the out of the box capability of the product and the configured Electronics Accelerator. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 13
Electronics Suite: SPC This course provides basic understanding of the Camstar accelerator solution for Electronics Manufacturers using Electronics Accelerator SPC. Camstar Manufacturing TM Who Should Take this Course All members of the SPC project implementation team. When to Take this Course At or near project kick off Exploring Electronics Suite Accelerator Familiar with Electronics Manufacturing processes Familiar with Statit Custom QC and Statit e-server 2 days Topics Covered Electronics Suite SPC Overview SPC Model, SPC Execution and SPC Execution Architecture. SPC Modeling Modeling Sequence and review of all SPC objects. SPC Execution During Data Collection, Job Progress and Ad- Hoc SPC. SPC Runtime Data SPC Txn Data and SPC Txn Data Point for Annotation, Exclusions and Override Value. SPC Records Search and update executed SPC charts. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 14
Education Quick Start Programs Camstar Education offers quickstart programs to assist our customers with specific project deliverables and to extend Camstar training by providing mentored assistance. Definition: A quickstart program is a combination of informal training, mentoring and hands-on assistance to give a Customer resource (or two) an accelerated start with assigned project deliverables in a specific technical Camstar product. Duration: not to exceed 5 days (including travel) Optional: Supplemented by additional Services, or Tier 1 or 2 Extended Services Typically performed on-site but may be conducted remotely Most quickstarts include pre-quickstart checklists to gauge readiness Training materials are informal; Additional collateral in the form of white papers, step by step instructions, and how too documents are also provided The related Training Class is available separately, ~2 days training in open enrollment on a generic model. On release 5.1, Camstar education is pleased to offer the following quickstarts by specific technical product. Following the quickstart descriptions you will find descritpions of the training content used in quickstarts. These can be scheduled as training apart from the quickstart and are occasionally offered in open enrollment seating in the Charlotte Training Center. Camstar Installation: Title Audience Pre-checklist Duration Training Mentoring Enterprise Platform Server installation IT and Server administators Checklists to determine readiness are provided. Hardware and Software required must be available to schedule this quickstart 5 days Enterprise Platform Administration Mentored assistance to install and configure Camstar servers based on the approved Technical Design Document in support of the Camstar implementation. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 15
Camstar Interoperability: Title Audience Pre-requisites Pre-checklist Duration Training Mentoring Enterprise Integration Technical members of an implementation team involved with implementing ERP interfaces. Exploring Camstar Manufacturing and knowledge of your Company interface requirements. The Object Design course is required if you plan to do Outbound transactions. Familiarity with XML and XSLT (Style Sheets) is required Identified project deliverable defined as a touchpoint to or from Camstar Manufacturing and identified shop floor equipment. The specific transport to be used in Inbound or Outbound interface with the ERP or PLM 5 days XML Connect, Inbound, and Outbound COA Mentored assistance to work on the deliverable identified in the prechecklist Title Audience Pre-requisites Pre-checklist Duration Training Mentoring Equipment Integration Technical members of an implementation team involved with implementing interfaces to or from shop floor equipment and Camstar. Exploring Camstar Manufacturing and knowledge of your Company interface requirements. The Object Design course is required if you plan to do Outbound transactions. Familiarity with XML and XSLT (Style Sheets) is required Identified project deliverable defined as a touchpoint to or from Camstar Manufacturing and identified shop floor equipment. The specific transport to be used in Inbound or Outbound interface with the named shop floor equipment. 5 days XML Connect, Inbound, and Outbound COA Mentored assistance to work on the deliverable identified in the prechecklist Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 16
Title Audience Pre-requisites Pre-checklist Duration Training Mentoring Supplemental training Programming APIs Technical members of an implementation team involved with implementing interfaces that may require use of Camstar APIs. Exploring Camstar Manufacturing and knowledge of your Company interface requirements. The Object Design course is required if you plan to do Outbound transactions. Familiarity with XML and XSLT (Style Sheets) is required Identified project deliverable Not to exceed 5 days May include one or more of the following subjects: Programming with.net API Programming with Camstar Web Services Programming with Camstar WCF Services Mentored assistance with a specified project deliverable identified in the pre-checklist Customers using Camstar programming APIs should also participate in the appropriate version of Microsoft Visual Studio training. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 17
Camstar Intelligence: Title Audience Pre-requisites Pre-checklist Duration Training Mentoring Supplemental SAP-BO Training Reporting Quickstart Universe Designers, Report Developers, Report Administrators Exploring CM, Reporting Methodology, Portal Studio User / Developer SAP-BO education is recommended. Universe extensions based on Object changes identified and documented Report design specs 5 days Not to exceed 2 days Explanation of the attributes of both the Standard Universe (for Manufacturing transaction data) and the Configuration universe supplied on the Camstar Manufacturing database structure including the following: Classes Objects Conditions Joins Instruction on how to customize the Universe including the following: Adding tables and joins Creating Object subclasses and fields Creating custom measures and pre-defined conditions Saving and exporting the Universe A review of the standard out of box manufacturing and configuration reports supplied. Resetting the standard reports to an extended universe and publishing. Report generation and publishing using WebI Rendering Business Objects reports in Portal Studio Mentored assistance with identified universe work and report generation Camstar recommends that our customers using the Camstar Intelligence Reporting solutions also take appropriate classes for their role with SAP Business Objects. SAP provides various courses to support Server Administration, Universe Design, and Report Generation. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 18
Title Audience Pre-requisites Pre-checklist Duration Training Mentoring Supplemental Statit training Camstar SPC Quickstart Engineers Exploring Camstar Manufacturing, Object Design, and Portal Studio User. Statit education is recommended. Camstar Modeler (knowledge of Object Oriented concepts) Camstar Web Developer (familiarity with WFB and MS Visual Studio) Knowledge of Statistical Process Control concepts Knowledge of your company s data collection and SPC Charting requirements Identified data to collect and chart 5 days Not to exceed 2 days Definition of parametric data to be collected Modeling of defined parametric data in Camstar Manufacturing Definition of SPC chart using collected data Development of user interfaces to collect parametric data Development of user interfaces to display SPC charts Definition of business logic to handle SPC violation exceptions Definition and development of custom Statit Software SPC rules Definition and development of Statit Software Chart-generating Macros Configuration of an e-mail notification for SPC chart violations Modeling of Camstar SPC chart that use collected data, chart display options and SPC violation handling Mentored assistance with first set of chart deliverables Camstar recommends that our customers using the Camstar SPC solutions also take appropriate classes for their role with Statit. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 19
Business Logic: Title Object Model Extensions in Designer Audience Designers Pre-requisites Exploring Camstar Manufacturing, Object Design Pre-checklist Identifed designer work to extend the Object Model Duration Not to exceed 5 days Training Advanced Object Design Mentoring Mentored assistance in Desginer work and business logic changes User Interface (Portal Assistance) Title Audience Pre-requisites Pre-checklist Duration Training Mentoring Supplemental training Portal Configuration Quickstart UI Developers Exploring Camstar Manufacturing, Portal Studio User Identifed UI customization Not to exceed 5 days Portal Studio - Developer Mentored assistance to develop UI customizations Customers developing in Portal Studio should also participate in the appropriate version of Microsoft Visual Studio training. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 20
Quickstart Training Classes Training available within the quickstarts are described below. Advanced Object Design This course is available for candidates engaged in the Certification programs. It is a prerequisite to testing for the role of Certified Camstar Designer. Camstar Enterprise Platform TM ; Camstar Manufacturing TM ; Camstar Quality TM ; Camstar Intelligence TM Who Should Take this Course Skilled Designers When to Take this Course After some active hands-on experience in the Designer application to enhance skills and move to a deeper understanding. Prior to engaging in Certification testing for the Designer role. Exploring Camstar Manufacturing course Object Design course Web Forms Builder course It is helpful if attendees have had hands-on experience with the Designer application 2 days Topics Covered Understand the Camstar Architecture and the Object Model structure Review of Designer components and processes used to update the transaction database Understand the Camstar Event Model for Data Objects and Fields Introduction to CLF Authoring Learn about Function groups and commonly used functions from each group as well as Labels and Text Variable used to create error messages Discuss Map Processing to copy values between CDOs Learn how to Troubleshoot and Debug CLFs Creating and extending Container Transactions Learn the process to create and test Compound Transactions Introduction to Web Form Design (for testing of Designer configurations) Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 21
Introduction to Camstar Open Adapter Who Should Take this Course Topics Covered Class is conducted as instructor lead presentation and discussion. Hands-on class materials use the Camstar Manufacturing Open Adapter Inbound and Outbound reference guide, XML Connect reference guide, and the case studies from those guides. All Camstar s Core members of an implementation team involved with implementing the interfaces component of a system. Exploring Camstar Manufacturing and knowledge of your Company interface requirements. Familiarity with XML and XSLT (Style Sheets) is required 3 days Installation and configuration COA Inbound Discussion of Data Transports Configuration of the Transport by File Processing of an Inbound XML document to do a Maintenance transaction Installation and configuration of XML Connect Explanation of XML Connect functionality Configuration of XML Connect Processing of Camstar Manufacturing Move transaction to trigger an outbound XML document Installation and configuration of COA Outbound Discussion of architecture/xml Connect extension for COA Outbound Discussion of Data Transports Configuration of Camstar Manufacturing Open Adapter Transport by File Processing of Move transaction to a File Share using COA Outbound. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 22
Portal Studio Developer This course expands on the User level training to introduce system developers to more advanced topics, controls, and page configurations. This class is the training portion of the User Interface Portal quickstart program. Attendees will learn about the properties of page controls, how to correctly configure them to achieve the desired functionality, and how to apply these new concepts and skills to a real world example. Portal Studio Developer is the second in a series of classes available for Camstar customers and partners to learn the new technology and direction of the Camstar Enterprise Platform. Camstar Enterprise Platform TM ; Camstar Manufacturing TM ; Camstar Quality TM ; Camstar Intelligence TM Who Should Take this Course System Developers Exploring Camstar Manufacturing; Portal Studio - User 1.5 days Topics Covered Labels Grids Pageflows Field Expressions Control properties Data Contracts Import/Export Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 23
Camstar Cell Controller Installation and Configuration This class provides information on the installation, configuration, monitoring and troubleshooting of the Camstar Cell Controller. Camstar Manufacturing TM Who Should Take this Course Fab automation engineers and technicians, Fab IT staff Basic knowledge of communication protocols used (SECS/GEM, XML, OPC, ) Understanding of the Fab operational scenarios Fab infrastructure, role and responsibilities of the MES 2 days Topics Covered Role and responsibilities of the Cell Controller within the fab automation environment Cell Controller Architecture and components Hardware and software prerequisites Cell Controller installation Configuration of the equipment connections and the Cell Controller core Data collection configuration Cell Controller Engineering Database o Schema o Setup recommendations Cell Controller startup and shutdown Monitoring and logging Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 24
Camstar Installation and Configuration Who Should Take this Course When to Take this Course Topics Covered The Camstar Installation and Configuration provides a basic understanding of the Camstar architecture and the processes involved in installation and configuration of the products in a standalone desktop or laptop environment. The course provides information needed to plan for ion servers to support the system deployment. The outcome of this course is an environment to support subsequent project training or a development environment to provide project team collaboration in solution design and build. For this reason this class is required for customers choosing to stand up a training lab environment to have Camstar training conducted at their facilities. The InstallGuide.pdf technical publication is the reference material for this course and is available for download from the Camstar Support site. All Camstar s Members of an implementation team involved with the installation and configuration of Camstar and the ongoing technical administration of the computer hardware and system software. Early in the project engagement, usually scheduled in conjunction with project kick off activities for customers who wish to stand up a training lab. System Administration skills and knowledge of your system and network. There are specific hardware and software requirements that must be met to support this class and establishment of leave behind training or development environment. Customers must provide all licensed software required to install and configure a standalone instance of Camstar. Up to 2 days Camstar Architecture overview Camstar Installation including topology, minimum requirements, database considerations, and license management Discover the Management Studio and the added benefits of managing your servers from a centralized management tool Installing Camstar Clients and Applications Camstar Security Model overview (Role Based Access Control) Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 25
Camstar Enterprise Platform Administration Who Should Take this Course When to Take this Course Unit 1 Unit 2 Unit 3 Unit 4 Unit 5 This course represents a series of instructional workshops conducted by Camstar Installers while on site assisting customers with ion server configurations. The topics listed below are developed in modular format so that customers can select the ones most important to their implementation. The training sessions introduce key resources within customer organizations with information and reference materials to support maintaining healthy Camstar systems. The SysAdmin.pdf technical publication is the reference material for this course and is available for download from the Camstar Support site. This course is frequently coupled with onsite consulting to form the Quickstart program and modules are mapped to the installation based on approved Techncial Design Documents. All Camstar s Members of an implementation team involved with the ongoing technical administration of the computer hardware and system software (System Administrators, Network Administrators, Database Administrators) Late in the project engagement, after receipt of production hardware, during installation. System Administration skills and knowledge of your system and network. Up to 12 hours depending on modules required System Architecture Server Roles and Services Camstar Management Studio Installation Overview Cluster Camstar Servers Databases Metadata Databases Data Migration Database tuning Database Administration Purge and Restore Operational Datastore (ODS) Hotfix application Conversion Upgrades Security Network and Security Considerations Camstar Security Model Troubleshooting and Support Performance Monitoring Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 26
Unit 6 (optional) Special consideration Camstar Support Site Troubleshooting Tools Best Practices Optional Modules: Camstar Open Adapter XML Connect Camstar Intelligence Architecture SAP Business Objects components Universe Camstar SPC Statit QC and eserver Requirements This training pertains to ALL Camstar products - CM, CI, COA, NOTE: The Technical Design Document for a specific customer engagement should provide the necessary mapping for modules to be taught. Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 27
Bridge Training (4.5 to 5.1) Who Should Take this Course When to Take this Course Topics Covered Bridge training is available to customers and covers the differences in the product (ootb) from one release of Camstar to the next. Camstar Manufacturing TM Individuals who have prior experience using Camstar Manufacturing (previously known as InSite) and are interested in understanding the new functionality contained within a release. Due to the fast pace of the delivery of bridge training, participants must qualify as knowledgeable on the current release. It can be very beneficial for customers planning to upgrade to a new product release. Prior experience with Camstar products at the current release. 4 days 5.1 bridge training is offered on tracks to accommodate the needs of various user roles. Delta 5.1 The changes from 4.5 to 5.1 were significant in several areas and the following training recommendations are provided for current customers interested in migration to 5.1 Day 1 Camstar Reporting Solutions Day 2 Camstar 5.1 What s new Day 3 & 4 Camstar Portal Studio The reporting Universe and standard reports KPIs Dashboards Summary Tables Rendering reports (Crystal and BO) in the Portal Release Overview Infrastructure changes eprocedures Framework Resource Status Model Object Model and Business Logic changes New User Experience: Styleguide, page layout, menu structure; navigation in the portal Camstar page catalog (modifications to ootb transactions and some new transaction pages) Introduction to Portal Studio Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 28
Camstar Systems, Inc. 13024 Ballantyne Corporate Place Suite 300, Charlotte, NC 28277 Telephone: (800) 588-0030 FAX: (704) 227-6780 Web site: http://www.camstar.com To request pricing or schedule information please contact SmartCamstar@camstar.com Copyright 2013 Camstar Systems, Inc. All Rights Reserved. Page 29