Lean Construction with Prospects for innovative process management solutions to increase quality and efficiency in asphalt road construction Coming Soon www.voegele.info
Overview WITOS stands for WIRTGEN GROUP Telematics and On-Site Solutions, the WIRTGEN GROUP s intelligent telematics system for efficient fleet, service and process management What is Divided into the two sub-sections "Fleet Management & Services" and "Process Optimization", WITOS supports you in the management of your fleet and in the planning, administration and implementation of construction processes. The systematic transmission, visualization and analysis of machine, process and position data enables you to enhance the efficiency of your fleet and processes during daily operation. Aided by telematics systems, WITOS Paving from VÖGELE optimizes all processes associated with asphalt paving and makes them transparent. The system includes networked solutions for job-site and machine planning, asphalt production, material handling on the job site, paving and analysis and documentation. The Advantages of WITOS Paving > > Delivery quantities, loading times and arrival times along with many important paving parameters are automatically displayed on the job-site terminal. This creates a transparent data base for all parties involved in the process: efficient process management during the construction work is now a reality. > > Real-time data transmission permits just-in-time delivery to the job site and ensures that the right material is delivered to the right place in the right amount and at the right time. Material shortages are prevented and non-productive times avoided for the paving crew and feed vehicle drivers. > > Comprehensive planning and analysis tools ensure extensive transparency and permit a durable improvement in quality, optimization of all part-processes and reduction in costs.
New Prospects for Asphalt Paving with The pathbreaking process management solution for management, site managers and planners at road construction companies as well as for mixing plants and transport companies Comprising the five modules "Control", "Material", "Transport", "JobSite" and "Analysis", WITOS Paving is the most comprehensive tool for networked process optimization in asphalt paving. The optimization of the entire road construction process enables you to fully exploit any potential for improvement in terms of paving quality, process safety as well as productivity and economical efficiency. The interface to WITOS Compacting ensures safe data exchange between asphalt paving and final compaction. 1. The Control Module > > Standardized planning tool for perfectly timed job-site processes and optimized time and material planning according to the just-in-time principle. > > Records all machine data and delivers real-time information on progress made and machine status. > > Overview of all construction projects within the company. > > Proactive, swift intervention to counteract bottlenecks through suggested changes in paving parameters. 2. The Material Module > > Calculates arrival times for material deliveries in advance and automatically reconciles desired and actual values. > > Clearly structured sequence of processes and deliveries. > > Just-in-time information on changes in mix requirements on the job site. > > Higher capacity utilization thanks to precise daily planning. Continual live data exchange 3. The Transport Module The real-time management of all construction processes by a single telematics system Just-in-time supply of the job site with mix > > Planning tool for economical lorry fleet management. > > Daily planning overview for lorry drivers with individual timing diagrams optimizes the driving times of the lorry drivers and the number of lorries required per construction project. > > Informs lorry drivers of desired arrival times on the job site as well as any changes or incidents. > > Optimum capacity utilization of the available driving time per lorry and increase of daily tonnage. Location of job site: 49 12 34,22 N / 8 23 34,23 E Agreed output mixing plant: 630t/h Delivery: 2,100t Location of job site: 49 12 34,22 N / 8 23 34,23 E Length of section: 1,000m Average width: 6m Layer thickness: 14cm Pave speed: 5m/min Display of work progress Dynamic lorry schedule Delivery quantity: 25t Next arrival on job site: 11.35 am Coordinates of job site: 49 12 34,22 N / 8 23 34,23 E Next arrival at asphalt mixing plant: 1.15 pm Delivery quantity: 25t Next arrival on job site: 11.55 am Coordinates of job site: 49 12 34,22 N / 8 23 34,23 E Next arrival at asphalt mixing plant: 1.45 pm
4. The JobSite Module > > Full transparency for the site manager about the construction project. > > Overview of the mix quantities en route to the job site. > > Support with calculations, e.g. when calculating the residual amount of asphalt required up to completion of the job site. > > Synchronized working processes for optimized job-site sequences thanks to direct communication with asphalt production and transport. > > Immediate detection of deviations in the construction progress so that corrections can be made in time. > > Perfect paving results thanks to uninterrupted supply of mix. 100% transparency about the ongoing construction project 5. The Analysis Module > > Analysis and statistics tool to enhance transparency and economic efficiency. > > Continuously analyses and visualizes all data determining the construction process, as well as the pavement quality. > > Controlling, documentation and reporting options for effective strategies to optimize the construction process for future projects. > > Detection of potential for improvement based on characteristic data and practice-related evaluation. Identification of potential for improvement WITOS Paving Job Site Tablet A constant companion on all WITOS Paving job sites: The Job Site Tablet keeps the site manager in the picture at all times, coordinating mix logistics and the paving process. Unscheduled changes and their consequences are identified with 100% reliability and all parties involved in the process are informed. The VÖGELE RoadScan system is an infrared heat imaging module which measures temperature values directly behind the screed. This permits permanent quality control during the paving process. HAMM HCQ: The heat imaging data and the measured base temperature in WITOS Paving are transmitted to the HCQ module and used to optimize the compaction processes.
JOSEPH VÖGELE AG Joseph-Vögele-Str. 1 67075 Ludwigshafen Germany +49 621 8105-0 +49 621 8105-461 marketing@voegele.info www.voegele.info Better Results with Leave nothing to chance in future. Rely on the process optimization strategies of WITOS Paving. > Increase in laydown rate > Improvement in quality > Minimization of costs > Safeguarding of valuable resources Just ask us we d be happy to advise you! ERGOPLUS, InLine Pave, NAVITRONIC, NAVITRONIC Basic, NAVITRONIC Plus, NIVELTRONIC, NIVELTRONIC Plus, RoadScan, SprayJet, VÖGELE and VÖGELE PowerFeeder are registered Community Trademarks of JOSEPH VÖGELE AG, Ludwigshafen/Rhein, Germany. PCC is a registered German Trademark of JOSEPH VÖGELE AG, Ludwigshafen/Rhein, Germany. ERGOPLUS, NAVITRONIC Plus, NAVITRONIC BASIC, NIVELTRONIC Plus, SprayJet, VISION, VÖGELE and VÖGELE PowerFeeder are trademarks registered in the US Patent and Trademark Office to JOSEPH VÖGELE AG, Ludwigshafen/Rhein, Germany. Legally binding claims cannot be derived from written information or pictures contained in this brochure. Pictures may include optional extras. We reserve the right of technical or design alterations. 2321262 EN/04.13