Commercial Air Conditioning Equipment

Commercial Air Conditioning Equipment

COMMERCIAL EQUIPMENT SALES Contact Us: CARRIER HEADQUARTERS AUSTRALIA 34-40 Garden Boulevard, Dingley Vic 3172 Ph: +61 (03) 9264 9555 Fax: +61 (03) 8551 0380 SYDNEY 101 Silverwater Road, Silverwater NSW 2128 Ph: +61 (02) 9202 4400 Fax: +61 (02) 9202 4488 PERTH APAC Way (off Ivy Street), Redcliffe WA 6104 Ph: +61 (08) 9366 3333 Fax: +61 (08) 9478 1521 BRISBANE Unit 2, Murdoch Court, Acacia Ridge, Qld 4110 Ph: +61 (07) 3273 3333 Fax: +61 (07) 3273 3377 ADELAIDE 962 South Road, Edwardstown, SA 5039 Ph: +61 (08) 8309 7245 Fax: +61 (08) 8371 0552

TABLE OF CONTENTS Domestic & Commercial Split Ducted Units 2 Commercial Split Ducted Units 3 Rooftop Packaged Units 4 Vertical Packaged Units 5 Vertical Indoor Packaged Units 6 Chilled Water Fan Coil Units 7-8 Toshiba Variable Refrigerant Flow (VRF) Systems 9-11 Air Handling Units 12 Air Cooled Liquid Chillers 13-14 Air to Water Heat Pumps 15 Water Cooled & Remote Condenser Liquid Chillers 16 Water Cooled Liquid Chillers 17-18 Control Products 19 Genuine Parts 20 Carrier Service 20 1

DOMESTIC & COMMERCIAL SPLIT DUCTED UNITS DOMESTIC & COMMERCIAL SPLIT DUCTED UNITS ULTIMATE SPLIT DUCTED Safe 24 Volt control circuit Liquid and suction line vales Reverse cycle defrost for fast efficient defrost 25mm foil faced semi rigid fully wrapped insulation Thermostat and interconnecting control cable Fault diagnostic with thermostat indication on fault Separate compressor compartment Integrated condensate and safety tray in fan coil unit Condensing unit pre charged with R22 or R407C for 15m pipe run Low noise operation Condenser coil corrosion treatment All models available with the option of R407C S015-S024 not MEPS compliant OPTIONS AVAILABLE S010, S012 & S015 are available in single or 3 phase Head pressure control Fault and run terminals Condensing Units 5 year parts and labour warranty Fan Coil Units NC-4 program Controller MODEL # AIRFLOW CAPACITY kw DIMENSIONS WEIGHT UNIT L/S Cool Heat H x L x W mm KG F.L.A Other options available on request please contact S006OHR7AN 7 7 830 x 950 x 360 87 17.03* your local sales office for more details. S006IHR7AN 350 383 x 520 x 1050 50 2.3 S008OHR7AN 7.5 7.5 830 x 950 x 360 90 22.24* S008IHR7AN 450 383 x 520 x 1050 50 2.85 S010OHR7AN 9.77 9 830 x 1100 x 360 107 24.14* S010IHR7AN 550 368 x 1225 x 575 54 2.85 S010OHR9AN 9.77 9 830 x 1100 x 360 107 12.12 S010IHR7AN 550 368 x 1225 x 575 54 2.85 S012OHR7AN 11.1 11 830 x 1100 x 360 110 29.04* S012IHR7AN 650 368 x 1225 x 575 55 2.75 S012OHR9AN 11.1 11 830 x 1100 x 360 110 14.04 S012IHR7AN 650 368 x 1225 x 575 55 2.75 S015OHR7AN 15.12 15 1341 x 1100 x 360 138 29.24* S015IHR7AN 750 427 x 1225 x 577 61 3.1 S015OHR9AN 15.12 15 1341 x 1100 x 360 136 19.24 S015IHR7AN 750 427 x 1225 x 577 61 3.1 S018OHR9AN 18 18 1341 x 1100 x 360 138 21.1 *Denotes unit F.L.A is for a single phase unit. S018IHR7AN 1000 427 x 1225 x 577 66 4.9 S021OHR9AN 21 21 1341 x 1100 x 360 154 25.53 Capacities based on: S021IHR7AN 750 427 x 1225 x 577 72 6.5 Net Cooling: 27/19C air on indoor coil 35C ambient Heating: 21C air on indoor coil 7C ambient 2 9

COMMERCIAL SPLIT DUCTED UNITS COMMERCIAL SPLIT DUCTED UNITS COMMERCIAL HEAT PUMP Safe 24 Volt control circuit Liquid and suction line vales Reverse cycle defrost for fast efficient defrost 25mm foil faced semi rigid fully wrapped insulation Low noise operation Separate compressor compartment Fault history and diagnostic (30kW- 96kW) Corrosion treatment for condenser coils All models available with the option of R407C Condensing Units Fan Coil Units MODEL # AIRFLOW CAPACITY kw DIMENSIONS WEIGHT UNIT L/S Cool Heat D x W x H mm KG F.L.A S015OV 15 15 957 x 1550 x 715 162 14.7 S015IH 750 427 x 1225 x 577 61 3.1 S018OV 18 18 957 x 1550 x 715 165 17.05 S018IH 1000 427 x 1225 x 577 66 4.95 S021OV 21 21 1162 x 1550 x 715 191 21.4 S021IH 1150 427 x 1225 x 577 72 6.5 OPTIONS AVAILABLE S024OV 24 24 1162 x 1550 x 715 195 23.5 Capacity control S024IH 1150 427 x 1225 x 577 72 6.5 Head pressure control S030OV 28.5 28 1425 x 1850 x 985 328 30.55 50mm foil faced semi rigid insulation S030IH 1650 820 x 1700 x 790 145 2.55 Electronic assisted compressor starting S036OV 35.41 35 1425 x 1850 x 985 195 32.1 Fault and run terminals S036IH 2000 820 x 1700 x 790 72 3.1 S040OV 40 40 1425 x 1850 x 1190 372 33.5 S040IH 2200 1100 x 1600 x 1195 221 4.5 S046OV 44 44 1425 x 1850 x 1190 372 39.1 Over 80 pre engineered options available, please S046IH 2500 1100 x 1600 x 1195 221 4.5 contact your local sales office for more details. S055OV 53.76 53 1425 x 1850 x 1190 502 45.68 S055IH 3000 1100 x 1600 x 1195 221 6.28 S064OV 63.37 63 1550 x 2200 x 1390 576 56.82 S064IH 3500 1100 x 1600 x 1400 257 6.28 S075OV 72.53 72 2200 x 1550 x 1595 570 54.8 S075IH 4100 1600 x 1100 x 1605 365 8.1 S085OV 85 85 1550 x 2200 x 1595 740 60.8 S085IH 4700 1300 x 2025 x 1595 397 8.1 S096OV 89.02 89 1550 x 2200 x 1595 692 75.44 S096IH 5300 1300 x 2025 x 1595 415 10.9 S110OV 107.44 107 2830 x 2200 x 1390 970 84.9 S110IH 5950 2200 x 2200 x 1290 600 10.9 S128OV 126.57 126 2830 x 2200 x 1390 1000 114.1 S128IH 5950 2200 x 2200 x 1290 625 14.3 Capacities based on: S150OV 148.26 148 2830 x 2200 x 1595 1100 128.74 Net Cooling: 27/19C air on indoor coil 35C ambient S150IH 5950 2200 x 2200 x 1595 725 14.3 Heating: 21C air on indoor coil 7C ambient S170OV 165.14 165 2830 x 2200 x 1595 1175 135.14 S170IH 5950 2200 x 2200 x 1595 925 20.7 S188OV 177.3 177 2830 x 2200 x 1595 1225 148.8 S188IH 5950 2200 x 2200 x 1595 925 20.7 10 3

ROOFTOP PACKAGED UNITS ROOFTOP PACKAGED UNITS COMMERCIAL HEAT PUMP Safe 24v control circuit Exceptional access/serviceability High and low pressure safety switches 25mm foil faced semi rigid fully wrapped insulation Reverse cycle defrost for fast efficient defrosting Compressor enclosure for quiet operation and safe and easy servicing Fault history and diagnostic (30kW- 96kW) All models available with the option of R407C MODEL # AIRFLOW CAPACITY kw DIMENSIONS WEIGHT UNIT L/S Cool Heat D x W x H mm KG F.L.A Capacity control P015AH 750 14.5 15 1625 x 1550 x 957 270 18.1 50mm foil faced semi rigid insulation P018AH 1000 17 18 1625 x 1550 x 957 270 18.6 Electronic assisted compressor starting P021AH 1150 20 21 1625 x 1550 x 1162 326 19.35 Fault and run terminals P024AH 1300 23 24 1625 x 1550 x 1162 326 21.05 P030AH 1650 29 29 2400 x 1850 x 985 565 30.55 P036AH 2000 35 36 2400 x 1850 x 985 567 32.1 Over 80 pre engineered options available, please P040AH 2200 39 40 2400 x 1850 x 1190 634 33.5 contact your local sales office for more details. P046AH 2500 45 46 2400 x 1850 x 1190 634 39.1 P055AH 3000 54 55 2400 x 1850 x 1190 739 45.68 P064AH 3500 63.5 64 2400 x 2200 x 1390 821 56.82 P075AH 4100 74.2 74 2400 x 2200 x 1595 874 65.82 P085AH 4700 83 84 2750 x 2200 x 1595 1057 65.82 P096AH 5300 89 93 2750 x 2200 x 1595 1110 84.9 P110AH 5950 107.5 107 5300 x 2200 x 1390 1680 114.4 P128AH 6900 126.5 126 5300 x 2200 x 1390 1680 65.82 Capacities based on: P150AH 8100 148.2 148 5300 x 2200 x 1595 1950 128.74 Net Cooling: 27/19C air on indoor coil 35C ambient P170AH 9200 165 164 5750 x 2200 x 1595 2275 135.14 Heating: 21C air on indoor coil 7C ambient P188AH 10400 178 177 5750 x 2200 x 1595 2350 148.8 4 11

VERTICAL PACKAGED UNITS VERTICAL PACKAGED UNITS Exclusively for industrial applications (Non human comfort applications) COMMERCIAL HEAT PUMP & COOLING ONLY Safe 24v control circuit Bi flow filter driers and sight glasses Exceptional access/serviceability High and low pressure safety switches 25mm foil faced semi rigid fully wrapped insulation Separate compressor enclosure for quiet operation and safe and easy servicing Centrifugal and propeller fans (on selected models) MODEL # AIRFLOW CAPACITY kw DIMENSIONS WEIGHT UNIT L/S Cool Heat D x W x H mm KG F.L.A REMOTE CONDENSER S12 755 12.59 12 850 x 1370 x 1735 305 11.1 OPTIONS AVAILABLE S15 940 15.65 15 850 x 1370 x 1735 335 18.1 Capacity control S17 1000 16.62 16 850 x 1370 x 1735 335 18.8 Head pressure control S25 1500 25.17 25 950 x 2050 x 2010 540 29.17 50mm foil faced semi rigid insulation S30 1880 31.26 31 950 x 2050 x 2010 555 30.63 Fault and run terminals S35 1940 33.31 33 950 x 2050 x 2010 560 33.37 Corrosion treatment for the evap and cond coils S45 2800 42.63 42 950 x 2050 x 2010 565 43 Over 80 pre engineered options available, please contact your local sales office for more details. Capacities based on: Net Cooling: 27/19C air on indoor coil 35C ambient Heating: 21C air on indoor coil 7C ambient 12 5

VERTICAL INDOOR PACKAGED UNITS VERTICAL INDOOR PACKAGED UNITS Exclusively for commercial applications (Non human comfort applications) AIR AND WATER COOLED Safe 24v control circuit Bi flow filter driers and sight glasses Exceptional access/serviceability High and low pressure safety switches 25mm foil faced semi rigid fully wrapped insulation OPTIONS AVAILABLE MODEL # AIRFLOW CAPACITY kw DIMENSIONS WEIGHT UNIT Capacity control L/S Cool Heat D x W x H mm KG F.L.A 50mm foil faced semi rigid insulation REMOTE CONDENSER REQUIRED Fault and run terminals S25 1500 22.2 22 785 x 1200 x 1990 275 14.6 Corrosion treatment for the evaporator coils S30 1700 26.8 26 785 x 1200 x 1990 295 16.6 50mm & 100mm V-form filters S35 1900 32.2 32 785 x 1200 x 1990 305 22.4 S45 2800 42.7 42 825 x 1700 x 1950 412 29.7 S60 4100 54.8 54 825 x 2400 x 1900 595 32.5 S75 4600 69.5 69 825 x 2400 x 1900 610 43.4 S85 4800 83 83 825 x 2400 x 1900 625 51.9 Over 80 pre engineered options available, please S110 6000 101.95 101 1100 x 2550 x 2140 850 63.8 contact your local sales office for more details. S120 6500 118.9 118 1100 x 2550 x 2140 870 75.5 6 13

CHILLED WATER FAN COIL UNITS CHILLED WATER FAN COIL UNITS CHILLED WATER HYDRONIC AND DIRECT EXPANSION Forward Curved Direct Drive Fans Three (3) speed motors 12mm (Chilled Water - Hot Water) insulation Lint Screen Filter 2 or 4 Pipe Coils Horizontal and Vertical Models Concealed furred in models available MODEL # AIRFLOW CAPACITY kw* DIMENSIONS WEIGHT L/S @ 2.5 m/s Cool Heat W x D x H KG 42N16 90 1.43 1 830 x 220 x 657 17 42N25 131 2.18 2 1030 x 220 x 657 19 42N33 158 3.14 2 1030 x 220 x 657 19 OPTION AVAILABLE 42N43 227 4.04 3 1230 x 220 x 657 22 Valve Packages 42N50 242 4.42 3 1230 x 220 x 657 22 Electric Heater 42N60 339 5.87 3 1430 x 220 x 657 35 Thermostat accessory 42N75 438 7.26 3 1430 x 220 x 657 35 Hot water coils * Capacity based on standard coil with 7 C entering water HYDRONIC CASSETTE Spring Mounted Backward Curved Fan 2 or 4 Pipe Models (Chilled Water - Hot Water) Four Way Air Distribution Fresh Air Spigot Connection Supply to Other Areas via Side Discharge Spigot MODEL # AIRFLOW CAPACITY kw* DIMENSIONS WEIGHT L/S @ 2.5 m/s Cool Heat H x L x D mm KG 42GWE004 184 2.4 1.5 298 X 575 X 575 19 42GWE008 194 4.0 2.5 298 X 575 X 575 20 42GWE010 236 4.7 2.5 298 X 575 X 575 20 42GWE012 283 5.9 3.0 298 X 825 X 825 41 OPTIONS AVAILABLE 42GWE016 338 8.3 3.0 298 X 825 X 825 43 Valve Packages 42GWE020 468 11.0 3.0 298 X 825 X 825 46 Electric Heater * Capacity based on standard coil with 7 C entering water Controls 16 7

CHILLED WATER FAN COIL UNITS CHILLED WATER FAN COIL UNITS 40 APB SINGLE SKIN 25mm Forward Curved Direct Drive Fans Three (3) speed motors 25mm Sisal face fibreglass insulation Natural Zincaneal Finish 4 or 6 Row Cooling Coils 1 Row Heating Coil MODEL # AIRFLOW CAPACITY kw* DIMENSIONS WEIGHT L/S @ 2.5 m/s Cool Heat L x W x H mm KG OPTIONS AVAILABLE 40APB024 525 11.5 10.0 575 x 754 x 400 33 Panel filter plenum; 25mm or 50mm 40APB040 800 17.5 15.0 575 x 1090 x 400 46 Powder coat finish, painted finish 40APB060 1100 22.0 18.0 575 x 1224 x 400 50 40APB080 1400 28.0 21.0 625 x 1556 x 496 72 * Cooling capacity based on 4 row chilled water coil with 7 C to 12 C chilled water * Heating capacity based on 1 row heating coil with 80 C to 65 C hot water NOTE: All units are standard with left handed pipe connections 40 HW HORIZONTAL & 40 RW VERTICAL Forward or Backward Curved Fans Polyester foil faced insulation Removable Access to Both Sides 25mm or 50mm insulation 40RW vertical units available up to model 026 MODEL # AIRFLOW CAPACITY kw* DIMENSIONS WEIGHT L/S @ 2.5 m/s Cool Heat L x W x H mm KG 40HW004 710 13 13.6 890 x 1374 x 435 122 40HW005 822 14.5 16 1000 x 1120 x 521 130 40HW006 1098 19.4 22 1075 x 1120 x 648 158 40HW007 1420 25.9 26.8 1075 x 1374 x 648 185 40HW008 1518 27.7 29 1195 x 1450 x 648 196 40HW010 1935 35.2 35.0 1195 x 1780 x 648 249 40HW014 2702 49.1 49.0 1326 x 1958 x 775 294 40HW016 3050 55.5 55.0 1424 x 1856 x 902 377 40HW020 3870 70.4 70.0 1424 x 2286 x 902 442 40HW024 4582 83.3 83.0 1509 x 2058 x 1156 579 40HW026 5162 93.8 93.0 1509 x 2286 x 1156 645 40HW034 7018 127.6 127.0 2055 x 2565 x 1454 790 * Cooling capacity based on 4 row chilled water coil with 7 C to 12 C chilled water * Heating capacity based on 1 row heating coil with 80 C to 65 C hot water 8 17

S-MMS. SUPER MODULAR MULTI SYSTEM Features Key features The S-MMS system operates with R410A refrigerant and incorporates the latest inverter drive technology in all outdoor unit models. Capacities range from 14 to 135kW in cooling mode and 16 to 150kW in heating mode with a capability to serve up to 48 indoor units. High COP (4.25 with 22.4kW size): for reduced energy consumption and increased savings. Advanced compressor Oil Management System guarantees improved reliability. TCC Link: State-of-the-art communication bus system with automatically configured addressing. Up to 48 indoor units can be connected. Latest Inverter Technology with the Intelligent Power Drive Unit (IPDU). CHILLED WATER FAN COIL UNITS Extended pipe runs up to 300m - for greater application flexibility. SUPER HEAT RECOVERY MULTI-SYSTEM MODEL # CAPACITY UNITS IN COMBINATION Max Indoor DIMENSIONS WEIGHT Kw Units H x D x W KG MMY-MAP0151HT8 14.0 1 8 1800 x 750 x 990 258 MMY-MAP0601HT8 16.0 1 10 1800 x 750 x 990 258 MMY-MAP0801HT8 22.4 1 13 1800 x 750 x 990 258 MMY-MAP1001HT8 28.0 1 16 1800 x 750 x 990 258 MMY-MAP121HT8 33.5 1 20 1800 x 750 x 990 258 MMY-MAP140HT8 38.4 2 (22.4kW + 16.0kW) 23 1800 x 750 x 2000 516 MMY-MAP1601HT8 45.0 2 (22.4kW + 22.4kW) 27 1800 x 750 x 2000 516 MMY-MAP140HT8 MMY-MAP1801HT8 50.4 2 (28.0kW + 22.4kW) 30 1800 x 750 x 2000 516 MMY-MAP2001HT8 56.0 2 (28.0kW + 28.0kW) 33 1800 x 750 x 2000 516 MMY-MAP2201HT8 61.5 3 (22.4kW + 22.4kW + 16.0kW) 37 1800 x 750 x 3010 774 MMY-MAP2211HT8 68.0 2 (33.5kW +28.0kW) 37 1800 x 750 x 2000 516 MMY-MAP2401HT8 68.0 3 (22.4kW + 22.4kW + 22.4kW) 40 1800 x 750 x 3010 774 MMY-MAP2411HT8 73.0 2 (33.5kW + 33.5kW) 40 1800 x 750 x 2000 774 MMY-MAP2601HT8 78.5 3 (28.0kW + 28.0kW + 22.4kW) 43 1800 x 750 x 3010 774 MMY-MAP2801HT8 84.0 3 (28.0kW + 28.0kW + 28.0kW) 47 1800 x 750 x 3010 774 MMY-MAP3001HT8 90.0 4 (22.4kW + 22.4kW + 22.4kW + 22.4kW) 48 1800 x 750 x 4020 1032 MMY-MAP3201HT8 90.0 3 (33.5kW + 28.0kW + 28.0kW) 48 1030 x 220 x 657 774 MMY-MAP3211HT8 96.0 4 (28.0kW + 22.4kW + 22.4kW + 22.4kW) 48 1800 x 750 x 4020 1032 MMY-MAP3401HT8 96.0 3 (33.5kW + 33.5kW + 28.0kW) 48 1800 x 750 x 3010 774 MMY-MAP3601HT8 101.0 4 (28.0kW + 28.0kW + 22.4kW + 22.4kW) 48 1800 x 750 x 4020 1032 MMY-MAP3611HT8 101.0 3 (33.5kW + 33.5kW + 33.5kW) 48 1800 x 750 x 3010 774 MMY-MAP3801HT8 106.5 4 (28.0kW + 28.0kW + 28.0kW + 22.4kW) 48 1800 x 750 x 4020 1032 MMY-MAP4001HT8 112.0 4 (28.0kW + 28.0kW + 28.0kW + 28.0kW) 48 1800 x 750 x 4020 1032 MMY-MAP4201HT8 118.0 4 (33.5kW + 28.0kW + 28.0kW + 28.0kW) 48 1800 x 750 x 4020 1032 MMY-MAP4401HT8 123.5 4 (33.5kW + 33.5kW + 28.0kW + 28.0kW) 48 1800 x 750 x 4020 1032 MMY-MAP4601HT8 130.0 4 (33.5kW + 33.5kW + 33.5kW + 28.0kW) 48 1800 x 750 x 4020 1032 MMY-MAP4801HT8 135.0 4 (33.5kW + 33.5kW + 33.5kW + 33.5kW) 48 1800 x 750 x 4020 1032 SUPER HEAT RECOVERY MULTI-SYSTEM MODEL # CAPACITY UNITS IN COMBINATION Max Indoor DIMENSIONS WEIGHT Kw Units H x D x W KG MMY-MAP0802FT8 22.4 1 13 1800 x 750 x 990 263 MMY-MAP1002FT8 28.0 1 16 1800 x 750 x 990 263 MMY-MAP1202FT8 33.5 1 16 1800 x 750 x 990 263 MMY-AP1602FT8 45.0 2 (22.4kW + 22.4kW) 27 1800 x 750 x 2000 526 MMY-AP1802FT8 50.4 2 (28.0kW + 22.4kW) 30 1800 x 750 x 2000 526 MMY-AP2002FT8 56.0 2 (28.0kW + 28.0kW) 33 1800 x 750 x 2000 526 MMY-AP2402FT8 68.0 3 (22.4kW + 22.4kW + 22.4kW) 40 1800 x 750 x 3010 789 MMY-AP2602FT8 73.0 3 (28.0kW + 22.4kW + 22.4kW) 43 1800 x 750 x 3010 789 MMY-AP2802FT8 78.5 3 (28.0kW + 28.0kW + 22.4kW) 47 1800 x 750 x 3010 789 MMY-AP3002FT8 84.0 3 (28.0kW + 28.0kW + 28.0kW) 48 1800 x 750 x 3010 789 9

SUPER HEAT RECOVERY MULTI-SYSTEM MODEL # CAPACITY UNITS IN COMBINATION Max Indoor DIMENSIONS WEIGHT S-HRM. SUPER HEAT RECOVERY MULTI SYSTEM Kw Units H x D x W KG MMY-MAP0151HT8 14.0 1 8 1800 x 750 x 990 258 MMY-MAP0601HT8 16.0 1 10 1800 x 750 x 990 258 MMY-MAP0801HT8 22.4 1 13 1800 x 750 x 990 258 MMY-MAP1001HT8 28.0 1 16 1800 x 750 x 990 258 MMY-MAP121HT8 33.5 1 20 1800 x 750 x 990 258 Features Key features MMY-MAP140HT8 38.4 2 (22.4kW + 16.0kW) 23 1800 x 750 x 2000 516 MMY-MAP1601HT8 45.0 2 (22.4kW + 22.4kW) 27 1800 x 750 x 2000 516 MMY-MAP140HT8 MMY-MAP1801HT8 Toshiba 50.4 offers the three-pipe 2 (28.0kW S-HRM + 22.4kW) that delivers 30 1800 x 750 x 2000 516 Energy consumption efficiency: average COP of 3.97 MMY-MAP2001HT8 simultaneous 56.0 cooling and 2 heating (28.0kW and + 28.0kW) exceptional 33 (22.4 kw). 1800 x 750 x 2000 516 MMY-MAP2201HT8 energy 61.5efficiency. 3 (22.4kW + 22.4kW + 16.0kW) 37 1800 x 750 x 3010 774 MMY-MAP2211HT8 68.0 2 (33.5kW +28.0kW) 37 1800 x 750 x 2000 516 Increased comfort: cooling or heating is automatically MMY-MAP2401HT8 MMY-MAP2411HT8 The 68.0 three-pipe VRF 3 SHRM (22.4kW Systems + 22.4kW that + 22.4kW) have set new 73.0 standards in the global 2 (33.5kW marketplace. + 33.5kW) 40 1800 x 750 x 3010 774 selected on a unit-by-unit basis to suit local area 40 1800 x 750 x 2000 774 requirements and operating environment, thanks to MMY-MAP2601HT8 78.5 3 (28.0kW + 28.0kW + 22.4kW) 43 1800 x 750 x 3010 the compact flow selector unit. 774 MMY-MAP2801HT8 We now 84.0 announce simultaneous 3 (28.0kW + 28.0kW cooling + and 28.0kW) 47 1800 x 750 x 3010 774 MMY-MAP3001HT8 heating 90.0systems 4 to (22.4kW join the + S-MMS 22.4kW + range. 22.4kW + 22.4kW) Toshiba s 48 unique 1800 piping x 750 branch x 4020 flexibility: the 1032 MMY-MAP3201HT8 90.0 3 (33.5kW + 28.0kW + 28.0kW) three-way 48 pipe connection 1030 x 220 x between 657 indoor and 774 MMY-MAP3211HT8 For ease 96.0 of installation 4 (28.0kW and + cost 22.4kW saving + 22.4kW the outdoor + 22.4kW) outdoor 48 units accommodates 1800 x 750 x 4020 an installation 1032 height MMY-MAP3401HT8 units 96.0 are modular. 3 (33.5kW + 33.5kW + 28.0kW) variation 48 between 1800 indoor x 750 units x 3010of 35 m (equivalent 774 to MMY-MAP3601HT8 101.0 4 (28.0kW + 28.0kW + 22.4kW + 22.4kW) a 9-story 48 building). 1800 x 750 x 4020 1032 MMY-MAP3611HT8 101.0 3 (33.5kW + 33.5kW + 33.5kW) 48 1800 x 750 x 3010 774 MMY-MAP3801HT8 106.5 4 (28.0kW + 28.0kW + 28.0kW + 22.4kW) Enviable 48 reliability 1800 with x 750 the x Active 4020 Oil Management 1032 MMY-MAP4001HT8 112.0 4 (28.0kW + 28.0kW + 28.0kW + 28.0kW) system. 48 1800 x 750 x 4020 1032 MMY-MAP4201HT8 118.0 4 (33.5kW + 28.0kW + 28.0kW + 28.0kW) 48 1800 x 750 x 4020 1032 MMY-MAP4401HT8 123.5 4 (33.5kW + 33.5kW + 28.0kW + 28.0kW) Wide 48 control applications: 1800 x 750 x 4020 1032 MMY-MAP4601HT8 130.0 4 (33.5kW + 33.5kW + 33.5kW + 28.0kW) Artificial 48 Intelligence 1800 x network 750 x 4020 system available 1032 and MMY-MAP4801HT8 135.0 4 (33.5kW + 33.5kW + 33.5kW + 33.5kW) Building 48 Management 1800 x 750 System x 4020(BMS) compatible. 1032 SUPER HEAT RECOVERY MULTI-SYSTEM MODEL # CAPACITY UNITS IN COMBINATION Max Indoor DIMENSIONS WEIGHT Kw Units H x D x W KG MMY-MAP0802FT8 22.4 1 13 1800 x 750 x 990 263 MMY-MAP1002FT8 28.0 1 16 1800 x 750 x 990 263 MMY-MAP1202FT8 33.5 1 16 1800 x 750 x 990 263 MMY-AP1602FT8 45.0 2 (22.4kW + 22.4kW) 27 1800 x 750 x 2000 526 MMY-AP1802FT8 50.4 2 (28.0kW + 22.4kW) 30 1800 x 750 x 2000 526 MMY-AP2002FT8 56.0 2 (28.0kW + 28.0kW) 33 1800 x 750 x 2000 526 MMY-AP2402FT8 68.0 3 (22.4kW + 22.4kW + 22.4kW) 40 1800 x 750 x 3010 789 MMY-AP2602FT8 73.0 3 (28.0kW + 22.4kW + 22.4kW) 43 1800 x 750 x 3010 789 MMY-AP2802FT8 78.5 3 (28.0kW + 28.0kW + 22.4kW) 47 1800 x 750 x 3010 789 MMY-AP3002FT8 84.0 3 (28.0kW + 28.0kW + 28.0kW) 48 1800 x 750 x 3010 789 16 10

FAN COIL UNITS Technical specifications heat pump Model Type Model Name Cooling cap. (kw) Heating cap. (kw) Height (mm) Width (mm) Depth (mm) Weight (kg) Four way Cassette Compact Four way Cassette Two way Cassette One way Cassette Concealed duct, stand type Concealed duct, high static pressure Slim Duct Under-ceiling Hi-wall MMU-AP0091H MMU-AP0121H MMU-AP0151H MMU-AP0181H MMU-AP0241H MMU-AP0271H MMU-AP0301H MMU-AP0361H MMU-AP0481H MMU-AP0561H MMU-AP0071MH MMU-AP0091MH MMU-AP0121MH MMU-AP0151MH MMU-AP0181MH MMU-AP0071WH MMU-AP0091WH MMU-AP0121WH MMU-AP0151WH MMU-AP0181WH MMU-AP0241WH MMU-AP0271WH MMU-AP0301WH MMU-AP0071YH MMU-AP0091YH MMU-AP0121YH MMU-AP0152SH MMU-AP0182SH MMU-AP0242SH MMD-AP0071BH MMD-AP0091BH MMD-AP0121BH MMD-AP0151BH MMD-AP0181BH MMD-AP0241BH MMD-AP0271BH MMD-AP0301SH MMD-AP0361BH MMD-AP0481BH MMD-AP0561BH 2.80 3.60 4.50 5.60 7.10 9.00 11.20 14.00 16.00 2.20 2.80 3.60 4.50 5.60 2.20 2.80 3.60 4.50 5.60 7.10 9.00 2.20 2.80 3.60 4.50 5.60 7.10 2.20 2.80 3.60 4.50 5.60 7.10 9.00 11.20 14.00 16.00 3.20 4.00 5.00 6.30 9.00 10.00 12.50 16.00 1 2.50 3.20 4.00 5.00 6.30 2.50 3.20 4.00 5.00 6.30 9.00 10.00 2.50 3.20 4.00 5.00 6.30 2.50 3.20 4.00 5.00 6.30 9.00 10.00 12.50 16.00 1 MMD-AP0181H 5.60 6.30 MMD-AP0241H MMD-AP0271H 7.10 9.00 256 840 840 319 840 840 28 268 575 575 17 398 830 1350 550 235 850 400 22 200 1000 710 320 380 550 33 44 48 21 22 27 700 30 800 1000 39 1350 51 MMD-AP0361H 11.20 12.50 56 MMD-AP0481H 14.00 16.00 1200 67 MMD-AP0721H MMD-AP0961H MMD-AP0071SPH MMD-AP0091SPH MMD-AP0121SPH MMD-AP0151SPH MMD-AP0181SPH MMC-AP0151H MMC-AP0181H MMC-AP0241H MMC-AP0271H MMC-AP0361H MMC-AP0481H MMK-AP0072H MMK-AP0092H MMK-AP0122H 22.40 2 2.20 2.80 3.60 4.50 5.60 4.50 5.60 7.10 11.20 14.00 2.20 2.80 3.60 25.00 31.50 2.50 3.20 4.00 5.00 6.30 5.00 6.30 9.00 12.50 16.00 2.50 3.20 4.00 850 660 470 1380 1250 155 210 845 645 210 910 50 52 22 23 21 1180 680 25 1595 33 275 790 208 11 20 22 23 Hi-wall Floor standing cabinet type Floor standing Concealed type Tall floor-standing MMK-AP0071H MMK-AP0091H MMK-AP0121H MMK-AP0151H MMK-AP0181H 2.20 2.80 3.60 4.50 5.60 2.50 3.20 4.00 5.00 6.30 368 895 18 210 1055 19 MMK-AP0241H 7.10 1430 25 MML-AP0071H MML-AP0091H MML-AP0121H MML-AP0151H MML-AP0181H 2.20 2.80 3.60 4.50 5.60 2.50 3.20 4.00 5.00 6.30 630 950 230 MML-AP0241H 7.10 40 MML-AP0071BH MML-AP0091BH MML-AP0121BH MML-AP0151BH MML-AP0181BH MML-AP0241BH MMF-AP0151H MMF-AP0181H MMF-AP0241H MMF-AP0271H MMF-AP0361H MMF-AP0481H MMF-AP0561H 2.20 2.80 3.60 4.50 5.60 7.10 4.50 5.60 7.10 11.20 14.00 16.00 2.50 3.20 4.00 5.00 6.30 5.00 6.30 9.00 12.50 16.00 1 600 745 1750 600 Cooling capacity based on an indoor air temperature of 27 C db/19 C wb and an outdoor air temperature of 35 db Heating capacity based on an indoor air temperature of 20 C db and an outdoor air temperature of 7 db/6 C wb 220 37 21 1045 29 210 48 49 390 65 11

AIR HANDLING UNITS AIR HANDLING UNITS 39 GALAXY DOUBLE SKIN 25mm Pentapost aluminium frame Mixing Box & Filter sections Forward or Backward curved Fans Colour Bond Panels Removable Panels Base frame Internally isolated fan & motor base Slide rail mounted coils Horizontal & vertical configurations (vertical up to model 1319 only) MODEL # AIRFLOW CAPACITY kw* DIMENSIONS WEIGHT L/S @ 2.5 m/s Cool Heat L x W x H mm KG OTHER FEATURES 0508A 479 8.9 8.9 1110 x 910 x 710 144 39 Galaxy air handling unit can be matched to 0508B 705 13.1 13.0 1110 x 910 x 710 159 APAC series commercial air cooled condensing units 0511 1044 19.4 19.3 1110 x 1210 x 710 198 DX Coils available 0612 1322 24.7 24.5 1210 x 1310 x 810 245 V-form & bag filters 0713 1814 33.7 33.2 1310 x 1410 x 910 293 Filter, mixing box and access modules 0813 1995 37.1 37.0 1410 x 1410 x 1010 330 0914 2565 47.8 47.5 1510 x 1510 x 1010 386 0916 2987 55.6 55.5 1510 x 1710 x 1110 442 1018 3612 67.2 67.0 1610 x 1910 x 1210 514 1118 4129 76.8 76.5 1610 x 1910 x 1310 560 1319 5209 97.0 97.0 1710 x 2010 x 1510 659 1422 6129 114.1 114.0 1910 x 2310 x 1610 787 1522 6774 126.1 126.0 2110 x 2310 x 1710 859 1722 7096 132.1 132.0 2110 x 2310 x 1910 917 1724 7717 143.7 143.5 2110 x 2510 x 1910 953 1725 8161 151.9 151.8 2210 x 2610 x 1910 1019 1926 8516 158.5 158.2 2210 x 2710 x 2110 1143 2127 11249 209.4 209.3 2410 x 2810 x 2310 1425 2230 13419 249.8 249.5 2720 x 3110 x 2410 1558 2234 15741 293.0 293.0 2720 x 3510 x 2410 1747 2434 16100 299.7 299.5 2720 x 3510 x 2610 1845 2636 18346 341.5 341.1 3020 x 3710 x 2810 2044 * Cooling capacity based on 4 row chilled water coil with 7 C to 12 C chilled water * Heating capacity based on 1 row heating coil with 80 C to 65 C hot water 39 TDF DOUBLE SKIN 25mm Direct or Belt Drive Fans Horizontal & Vertical models 25 & 50mm filters available MODEL # AIRFLOW CAPACITY kw* DIMENSIONS WEIGHT L/S @ 2.5 m/s Cool Heat L x W x H mm KG 04 400 8.0 7.9 1150 x 755 x 505 110 06 600 13.0 12.5 1150 x 935 x 505 135 09 900 21.0 20.0 1150 x 1265 x 505 185 14 1400 32.0 31.5 1150 x 1675 x 505 220 18 1800 40.0 39.0 1150 x 1675 x 642 270 24 2500 66 48 2678 x 1675 x 940 414 28 2900 76 56 2678 x 1675 x 940 232 34 3500 92 67 2678 x 1675 x 940 267 12 18

19 AIR COOLED LIQUID CHILLERS 30RA SERIES AIR COOLED LIQUID CHILLERS Factory mounted hydronic/pump, expansion tank Refrigerant HFC R407C Low noise scroll compressors Stainless steel plate heat exchangers Wide operating envelope (-10 C to -46 C ambient) Accurate temperature control Low Noise "Flying Bird" Fans PRO-DIALOG Plus Digital Control MODEL # CAPACITY KW DIMENSIONS DIMENSIONS WEIGHT L x W x H mm L x W x KG H mm 30RA005 5.1 300 x 800 x 590 71 30RA007 6.6 300 x 800 x 803 73 OPTIONS AVAILABLE 30RA009 7.6 300 x 800 x 803 85 Unit without hydronic/pump, expansion tank 30RA011 9.6 300 x 800 x 1264 108 Condenser anti-corrosion treatment 30RA013 11.2 300 x 800 x 1264 118 Condenser protection grille 30RA017 17.5 478 x 1328 x 1383 185 High level interface to BMS 30RA021 21.9 478 x 1328 x 1383 215 Brine 30RA026 25.5 478 x 1503 x 1587 268 Single or dual hydronic pumps (040-240) 30RA033 32.3 478 x 1503 x 1587 295 30RA040 41 2071 x 1081 x 1329 536 30RA050 50 2071 x 1081 x 1329 595 30RA060 58 2071 x 1081 x 1329 610 30RA070 68 2071 x 1081 x 1329 625 30RA080 78 2071 x 1081 x 1329 642 30RA090 91 2071 x 2278 x 1329 1100 30RA100 99 2071 x 2278 x 1329 1112 30RA120 119 2071 x 2278 x 1329 1157 Nominal capacities based on: 30RA140 136 2071 x 2278 x 1329 1224 7C leaving water temperature and 35C outdoor air temperature. 30RA160 156 2071 x 2278 x 1329 1262 Cool 30RA-200 206 3351 x 2279 x 1674 2056 30RA-240 248 3351 x 2279 x 1674 2166 30RB SERIES AIR COOLED LIQUID CHILLERS High efficiency HFC-410a refrigerant Generation 4 low noise Flying Bird condenser fans Dual independent refrigerant circuits (30RB262-30RB522) High efficiency electronic expansion valves Three independent refrigerant circuits (30RB602-802) Low noise scroll compressors MODEL # CAPACITY KW DIMENSIONS WEIGHT Cool L x W x H mm KG OPTIONS AVAILABLE 30RB262 258 2457 x 2253 x 2370 Hydronic module pumping package (30RB262-30RB522) 30RB302 293 3604 x 2253 x 2985 High level interface to BMS 30RB342 328 3604 x 2253 x 3185 Brine 30RB372 359 3604 x 2253 x 3225 Fused mains power disconnect switch 30RB402 391 3604 x 2253 x 3355 Heat reclaim 30RB432 418 4798 x 2253 x 3915 Free cooling 30RB462 447 4798 x 2253 x 4055 Additional sound attenuation 30RB522 506 4798 x 2253 x 4230 30RB602 596 5992 x 2253 x 5490 30RB672 652 5992 x 2253 x 5665 30RB732 704 7186 x 2253 x 6355 30RB802 758 7186 x 2253 x 6530 13

AIR COOLED LIQUID CHILLERS AIR COOLED LIQUID CHILLERS 30XA SERIES AIR COOLED LIQUID CHILLERS High efficiency HFC-134a refrigerant Dual independent refrigeration circuits (30XA252-30XA1002) Three independent refrigeration circuits (30XA1102-30XA1502) Four independent refrigeration circuits (30XA1702) Twin rotor screw compressors Generation 4 low noise Flying Bird condenser fans Aluminium micro-channel condenser coils High efficiency electronic expansion valves Mechanically cleanable cooler tubes OPTIONS AVAILABLE MODEL # CAPACITY kw DIMENSIONS WEIGHT Hydronic module pumping package (30XA252-30XA502) Cool L x W x H mm KG Noise reduction options 30XA252 268 3604 x 2253 x 3840 High level interface to BMS 30XA302 293 3604 x 2253 x 3880 Brine 30XA352 320 3604 x 2253 x 3920 Fused mains power disconnect switch 30XA402 382 4798 x 2253 x 4780 Heat reclaim 30XA452 438 4798 x 2253 x 4850 Free cooling 30XA502 492 5992 x 2253 x 5330 Additional sound attenuation 30XA602 605 7186 x 2253 x 6260 30XA702 653 7186 x 2253 x 6410 30XA752 706 7186 x 2253 x 6710 30XA802 764 7186 x 2253 x 7010 30XA852 802 8380 x 2253 x 7560 30XA902 869 8380 x 2253 x 7860 30XA1002 951 9574 x 2253 x 8440 30XA1102 1116 11962 x 2253 x 10440 30XA1202 1216 11962 x 2253 x 10880 30XA1302 1296 11962 x 2253 x 11260 30XA1352 1382 11962 x 2253 x 11620 30XA1402 1426 9574 x 2253 x 12,630 30XA1502 1478 9574 x 2253 x 12,780 30XA1702 1605 8380 x 2253 x 15,120 Nominal capacities based on: 7C leaving water temperature and 35C outdoor air temperature. 14 21

AIR TO WATER HEAT PUMPS WITH INTEGRATED HYDRONIC MODULES AIR TO WATER HEAT PUMPS WITH INTEGRATED HYDRONIC MODULES 30RH 30RH SERIES SERIES AIR AIR TO TO WATER WATER HEAT HEAT PUMP-CHILLERS PUMP-CHILLERS Low Low noise noise scroll scroll compressors compressors PRO-DIALOG PRO-DIALOG Plus Plus Digital Digital Control Control Stainless Stainless steel steel plate plate heat heat exchangers exchangers Factory Factory mounted mounted hydronic hydronic / pump, pump, expansion expansion tank tank Refrigerant Refrigerant HFC HFC R407C R407C Wide Wide operating operating envelope envelope (-10 (-10 C to to 46 46 C ambient) ambient) MODEL MODEL # CAPACITY CAPACITY kw* kw* DIMENSIONS DIMENSIONS WEIGHT WEIGHT Cool Cool Heat Heat L x W x H mm mm KG KG 30RH005 30RH005 5 5.7 5.7 300 300 x 800 800 x 590 590 83 83 30RH007 30RH007 6.7 6.7 7.5 7.5 300 300 x 800 800 x 803 803 85 85 30RH009 30RH009 7.2 7.2 8.7 8.7 300 300 x 800 800 x 803 803 88 88 OPTIONS OPTIONS AVAILABLE AVAILABLE 30RH011 30RH011 9.6 9.6 10.1 10.1 300 300 x 800 800 x 1264 1264 112 112 Unit Unit without without hydronic/pump, hydronic/pump, expansion expansion tank tank 30RH013 30RH013 11.5 11.5 13.8 13.8 300 300 x 800 800 x 1264 1264 123 123 Condenser Condenser anti-corrosion anti-corrosion treatment treatment 30RH017 30RH017 16.7 16.7 18.8 18.8 478 478 x 1328 1328 x 1383 1383 235 235 Condenser Condenser protection protection grille grille 30RH021 30RH021 21.6 21.6 24.8 24.8 478 478 x 1328 1328 x 1383 1383 265 265 High High Level Level interface interface to to BMS BMS 30RH026 30RH026 24.6 24.6 27.8 27.8 478 478 x 1503 1503 x 1587 1587 285 285 Brine Brine 30RH033 30RH033 29 29 34 34 478 478 x 1503 1503 x 1587 1587 315 315 Single Single or or Dual Dual Hydronic Hydronic chilled chilled water water pump pump option option (040-240) (040-240) 30RH040 30RH040 38.3 38.3 39.2 39.2 478 478 X 1328 1328 X 1383 1383 566 566 30RH050 30RH050 44.5 44.5 47.3 47.3 478 478 X 1328 1328 X 1383 1383 624 624 Nominal Nominal capacities capacities based based on: on: 30RH060 30RH060 54 54 58 58 478 478 X 1503 1503 X 1587 1587 647 647 Cooling Cooling capacity: capacity: 7C 7C leaving leaving water water temperature temperature and and 35C 35C 30RH070 30RH070 66 66 67 67 478 478 X 1503 1503 X 1587 1587 661 661 outdoor outdoor air air temperature temperature 30RH080 30RH080 71 71 80 80 2071 2071 X 1081 1081 X 1329 1329 691 691 Heating Heating capacity: capacity: 40C/45C 40C/45C entering/leaving entering/leaving water water temperature, temperature, 30RH090 30RH090 83 83 87 87 2071 2071 X 1081 1081 X 1329 1329 1183 1183 outdoor outdoor 7C 7C 30RH100 30RH100 92 92 98 98 2071 2071 X 1081 1081 X 1329 1329 1196 1196 Unit Unit weights weights include include hydronic hydronic kit kit 30RH120 30RH120 108 108 117 117 2071 2071 X 1081 1081 X 1329 1329 1238 1238 30RH140 30RH140 132 132 133 133 2071 2071 X 1081 1081 X 1329 1329 1312 1312 30RH160 30RH160 142 142 160 160 2278 2278 X 2071 2071 X 1329 1329 1368 1368 30RH200 30RH200 179 179 194 194 3351 3351 X 2279 2279 X 1674 1674 2233 2233 30RH240 30RH240 210 210 229 229 3351 3351 X 2279 2279 X 1674 1674 2405 2405 30RQ 30RQ SERIES SERIES AIR AIR TO TO WATER WATER HEAT HEAT PUMP-CHILLERS PUMP-CHILLERS High High efficiency efficiency HFC-410a HFC-410a refrigerant refrigerant Generation Generation 4 low low noise noise Flying Flying Bird Bird condenser condenser fans fans Dual Dual independent independent refrigerant refrigerant circuits circuits High High efficiency efficiency electronic electronic expansion expansion valves valves Low Low noise noise scroll scroll compressors compressors MODEL MODEL # CAPACITY CAPACITY kw* kw* DIMENSIONS DIMENSIONS WEIGHT WEIGHT Cool Cool Heat Heat L x W x H mm mm KG KG 30RQ262 30RQ262 249 249 276 276 2410 2410 X 2253 2253 X 2619 2619 30RQ302 30RQ302 275 275 302 302 3604 3604 X 2253 2253 X 3285 3285 OPTIONS OPTIONS AVAILABLE AVAILABLE 30RQ342 30RQ342 307 307 335 335 3604 3604 X 2253 2253 X 3481 3481 Hydronic Hydronic module module pumping pumping package package 30RQ372 30RQ372 326 326 366 366 3604 3604 X 2253 2253 X 3544 3544 High High level level interface interface to to BMS BMS 30RQ402 30RQ402 366 366 407 407 3604 3604 X 2253 2253 X 3718 3718 Fused Fused mains mains power power disconnect disconnect switch switch 30RQ432 30RQ432 389 389 445 445 4798 4798 X 2253 2253 X 4328 4328 30RQ462 30RQ462 430 430 505 505 4798 4798 X 2253 2253 X 4530 4530 30RQ522 30RQ522 465 465 552 552 4798 4798 X 2253 2253 X 4704 4704 20 15

WATER COOLED & REMOTE CONDENSER LIQUID CHILLERS WATER COOLED AND REMOTE CONDENSER LIQUID CHILLERS WATER COOLED - SCROLL Evaporator Hydronic Module - pumping pkg Slim line design suitable for car park installation Temperature reset and demand limiting Condenser Hydronic Module - pumping pkg HFC R407C refrigerant 30RWA - AIR COOLED REMOTE CONDENSER 30RW - WATER COOLED MODEL # CAPACITY kw DIMENSIONS WEIGHT Cool L x D x H mm KG 30RW-020 19.7 1204 X 693 X 1750 377 30RWA-020 18.5 1204 X 693 X 1750 333 30RW-025 25.6 1204 X 693 X 1750 396 30RWA-025 24.1 1204 X 693 X 1750 347 OPTIONS AVAILABLE 30RW-030 29.6 1204 X 693 X 1750 399 Chiller with dual chilled evaporator and condenser pumps 30RWA-030 27.9 1204 X 693 X 1750 347 Chiller without condenser (30RW 060-300) 30RW-040 39.6 1204 X 693 X 1750 432 Chiller without hydronic module 30RWA-040 37.8 1204 X 693 X 1750 370 Low leaving brine / water temperature down to -10C 30RW-045 45.3 1204 X 693 X 1750 452 Electronic starter for reduced start-up current 30RWA-045 43.6 1204 X 693 X 1750 383 30RW-060 55.6 2004 X 893 X 1750 717 30RWA-060 52.9 2004 X 893 X 1750 638 30RW-070 70.2 2004 X 893 X 1750 748 More options are available, please contact your local sales 30RWA-070 66.7 2004 X 893 X 1750 658 office. 30RW-080 79.9 2004 X 893 X 1750 789 30RWA-080 76 2004 X 893 X 1750 693 30RW-090 90.7 2004 X 893 X 1750 815 30RWA-090 86.8 2004 X 893 X 1750 714 30RW-110 108.6 2004 X 893 X 1750 959 30RWA-110 102.7 2004 X 893 X 1750 788 30RW-120 123.6 2004 X 893 X 1750 1032 30RWA-120 118.1 2004 X 893 X 1750 851 30RW-135 140.2 2004 X 893 X 1750 1052 30RWA-135 133.6 2004 X 893 X 1750 860 30RW-150 154 2004 X 893 X 1750 1072 30RWA-150 147.1 2004 X 893 X 1750 871 30RW-160 159.4 2952 X 893 X 1950 1404 30RWA-160 151.1 2952 X 893 X 1950 1193 30RW-185 182.5 2952 X 893 X 1950 1469 30RWA-185 172.6 2952 X 893 X 1950 1241 30RW-210 217.7 2952 X 893 X 1950 1697 30RWA-210 199.7 2952 X 893 X 1950 1404 30RW-245 248.8 2952 X 893 X 1950 1811 30RWA-245 228.6 2952 X 893 X 1950 1558 30RW-275 285.6 2952 X 893 X 1950 1897 30RWA-275 265.9 2952 X 893 X 1950 1596 30RW-300 311.5 2952 X 893 X 1950 1897 Nominal capacities based on: 30RWA-300 291.4 2952 X 893 X 1950 1596 7C leaving chilled water temperature and 45C condensing temperature. 22 16

WATER COOLED LIQUID CHILLERS WATER COOLED LIQUID CHILLERS COMMERCIAL WATER COOLED - SCREW HFC-134a refrigerant Dual independent refrigeration circuits Screw compressor (low vibration levels) PRO-DIALOG Plus Digital Control Demand limiting and temperature reset Small footprint Low operating weight MODEL # CAPACITY kw DIMENSIONS WEIGHT Cool L x W x H mm KG 30HXC-080 290 2555 x 980 x 1800 2274 30HXC-090 315 2555 x 980 x 1800 2279 30HXC-100 345 2555 x 980 x 1800 2302 OPTIONS AVAILABLE 30HXC-110 378 2565 x 980 x 1850 2343 High level interface to BMS 30HXC-120 423 3275 x 980 x 1825 2615 Stainless steel condenser tube sheets 30HXC-130 454 3275 x 980 x 1825 2617 Electronic assisted compressor soft starting 30HXC-140 515 3275 x 980 x 1825 2702 30HXC-155 547 3275 x 980 x 1825 2712 30HXC-175 604 3295 x 980 x 1950 3083 30HXC-190 638 3295 x 980 x 1950 3179 30HXC-200 714 3900 x 1015 x 1985 3873 More options are available, please contact your local sales 30HXC-230 805 3920 x 1015 x 2065 4602 office. 30HXC-260 902 3920 x 1015 x 2065 4656 30HXC-285 975 3920 x 1015 x 2065 4776 30HXC-310 1096 4530 x 1015 x 2115 5477 30HXC-345 1205 4530 x 1015 x 2115 5553 30HXC-375 1299 4530 x 1015 x 2115 5721 Nominal capacities based on: 7C leaving chilled water temperature and 29.5/35C leaving condenser water temperature. 24 17

WATER COOLED LIQUID CHILLERS WATER COOLED LIQUID CHILLERS MODEL # CAPACITY KW COOLING 19 XR 703-5275 19XR = CENTRIFUGAL 19 XRV 703-5000 19XRV = CENTRIFUGAL WITH VARIABLE FREQUENCY DRIVE 23 XRV 1055-1934 23XRV = VARIABLE SPEED SCREW CHILLER 19 XR / XRV Carrier Evergreen chillers offer the best value in high efficiency chlorine free centrifugal chillers. Carrier's Evergreen centrifugal chillers provide energy efficiecy levels of 0.100 IPLV These high effiencies can be achieved by using the optional variable frequency drive technology (19 XRV) Carrier has significantly reduced the power consumption of HFC-134a positive - pressure chillers. The result is ultra-high energy efficiencies, giving the Evergreen chillers the highest efficiency of any chlorine-free chiller in the world. Features & Benefits: Hermatic compressor features: * Environmentally friendly HFC - 134a refrigerant * Single stage design * Positive pressure design * Variable inlet guide vanes * Modular construction * Aerodynamically contoured impellers * Optional refrigerant isolation valves * Hermatic motors * Optional pump down unit * Microprocessor controlled oil heater * Optional unit - mounted starter * Refrigerant cooled oil cooler * Optional unit mounted, refrigerant cooled VFD 23 XRV Carrier's Evergreen 23 XRV chiller is the world's first integrated variable speed water cooled, screw chiller. It incorporates significant break throughs in water cooled chiller technology to provide excellent reliability and achieve superior efficiencies at true operating conditions without compromising the environment. Features & Benefits: * Variable speed, positive displacement screw compressor * Air-conditioning and Refrigerant Institute (ARI) certified efficiencies to 0.094 IPLV An ideal solution for constant and variable flow pumping systems * Environmentally friendly HFC - 134a refrigerant * Constant and variable evaporator flow * Low harmonic distortion * Low starting (Inrush) current * 0.99 power factor * Hermatic motor * Positive displacement compressor * Small foot print area 18

CONTROL PRODUCTS ROOM THERMOSTATS COMMERCIAL THERMOSTAT 7 Day programmable with 4 time/temperature settings per 24hours. Separate heating and cooling set points with automatic change over. No battery to replace. The internal memory stores programs during power interruptions. Dirty filter indication. Night set back with smart fan operation. DOMESTIC PROGRAMMABLE THERMOSTAT 7 Day programmable with 4 time/temperature settings per 24hours. Separate heating and cooling set points with automatic change over. No battery to replace. The internal memory stores programs during power interruptions. Dirty filter indication. Night set back. NON-PROGRAMMABLE THERMOSTAT Separate heating and cooling set points with automatic change over. No battery to replace. The internal memory stores programs during power interruptions. Dirty filter indication. AQUASMART COMPLETE SOLUTION Aquasmart is a fully pre-assembled hydronic HVAC solution bellow 250 kw designs to provide cooling and heating comfort to building occupants. Suited to residential and light commercial applications up to 2500m². System components include chiller / heat pumps, fan coils factory fitted with controls supervised and managed by the SYSTEM MANAGER offering a level of building management only found in more expensive non standard systems. Up to 128 terminals may be controlled in up to 32 zones. i-vu CCN Compact, lightweight, and fully compatible with all Carrier Comfort Network (CCN) systems Robust user interface offers dynamic comfort indicators on floor plans and real-time, interactive equipment graphics Automatic trending provides a clear history of important building conditions Graphically set, change, and view system schedules and setpoints Investigate and troubleshoot system problems with ease using i-vu s intuitive alarm viewer Standard reports for audit log, effective schedules, and equipment checkout Password-restricted access and Secure Sockets Layer (SSL) with 128-bit encryption for security 19 26

GENUINE PARTS GENUINE PARTS We have thousands of parts in stock We have thousands of parts in stock CARRIER SERVICE Replacement parts parts for for your your HVAC HVAC installation Replacement parts for Replacement your HVAC installation parts for Replacement your HVAC installation parts for your HVAC installation TOTALINE parts are designed to fit most brands of equipment TOTALINE parts are designed to fit most brands of equipment Our We multi have national thousands network of parts ensures in stock you will have the part you require Our multi national network ensures you will have the part you require TOTALINE parts are designed to fit most brands of equipment We have thousands of parts in stock Our multi national network ensures you will have TOTALINE parts are designed to fit most brands Demand the part of equipment TOTALINE you requireas your Demand TOTALINE as your replacement parts supplier for all replacement parts supplier for all Our We multi have national thousands network of parts ensures in stock you will have equipment the part you require equipment Demand TOTALINE as your TOTALINE parts are designed to fit most brands of equipment replacement parts supplier for all Our multi national network ensures you will have Demand equipment the part TOTALINE you require as your CARRIER CARRIER SERVICE SERVICE CARRIER SERVICE CARRIER SERVICE OUR PRINCIPAL OBJECTIVE IS TO SATISFY OUR CUSTOMERS OUR PRINCIPAL OBJECTIVE IS TO SATISFY OUR CUSTOMERS replacement parts supplier for all Demand equipment TOTALINE as your replacement parts supplier for all equipment CARRIER GUARANTEED QUALITY CARRIER GUARANTEED QUALITY TECHNICAL SERVICE TECHNICAL SERVICE MAINTENANCE CONTRACTS MAINTENANCE CONTRACTS REPAIR REPAIR UPGRADE TECHNICAL & REFURBISHMENT SERVICE UPGRADE & REFURBISHMENT EQUIPMENT MAINTENANCE COMMISSIONING CONTRACTS EQUIPMENT COMMISSIONING EQUIPMENT REPAIR TECHNICAL WARRANTY EQUIPMENT WARRANTY SERVICE UPGRADE & REFURBISHMENT MAINTENANCE CONTRACTS EQUIPMENT COMMISSIONING REPAIR EQUIPMENT WARRANTY UPGRADE & REFURBISHMENT EQUIPMENT COMMISSIONING EQUIPMENT WARRANTY CARRIER GUARANTEED QUALITY CARRIER GUARANTEED QUALITY OUR PRINCIPAL OBJECTIVE IS TO SATISFY OUR CUSTOMERS OUR PRINCIPAL OBJECTIVE IS TO SATISFY OUR CUSTOMERS From the moment your call is received, Carrier Service does everything possible to meet your requirements, quickly and economically. From the moment your call is received, Carrier Service does everything possible to meet your requirements, quickly and economically. From the moment your call is received, Carrier Service does everything possible to meet your requirements, quickly and economically. A A Fully Fully GuaranteedService From the moment your call is received, Carrier Service does everything possible to meet your requirements, quickly and economically. 27 27 S E R V I C E C O M P R E S S O R S 13 13 2665 1300 657 278 A Fully Guaranteed Service A Fully Guaranteed Service 20 27

Part No. 2008-04-10 Supersedes Part No.: 2000-20-11-99 ABN 81 00 024 74 Due to our policy of continuous improvement product specifications and details are subject to change without notice. E. & O.E