Innovative Solutions for a Range of Packaging Applications Packaging EMEA
Changing the Game in Packaging Packaging is a critical component of the final product. Protection, convenience, information and appearance are essential elements to achieve a successful consumer sale. Trinseo offers a variety of solutions for different packaging needs, including technologies that help to reduce both the use of raw material and cost while meeting stringent quality requirements. Plastic continues to be the most widely used material for packaging. It is light and easy to process to fit different packaging needs. Price pressure, differentiation, sustainability and weight reduction (both for cost savings and sustainability) are all challenges in doing business in the packaging arena. Safety, environment, cost savings, and sustainability are important to Trinseo, our customers and the end-users. With these objectives in mind, Trinseo is committed to ongoing investment in research and development. Dairy We are aware that end-users have high expectations about food quality and safety but they increasingly value convenience, product visibility and packaging options. Polystyrene is best-in-class when it comes to dairy products. Our polystyrene resins are the leading materials on the market with high processing speeds and optimal thermoforming properties. Our STYRON C-TECH resin has a good balance between clarity, stiffness and toughness, differentiating it from SBS resins on taint & odor performance and product cost. STYRON C-TECH s improved stiffness enables downgauging, offering additional cost savings through product substitution. STYRON A-TECH 1200 features our leading rubber technology with enhanced stiffness, toughness and thermoformability balance, which allows for raw material and fabrication cost savings through product weight reductions and increased blending opportunities. For dairy bottles, our STYRON A-TECH 1200 offers you savings of up to 20% against PET due to its lower density, lower cost and easier processing and higher stiffness. Deli/Bakery Time starved, on-the-go consumers want to preview their product purchase, and therefore Trinseo has prepared an offer that integrates a cost-efficient portfolio to support the increased snacking on-the-go trend and the drive towards pre-packaged foods. STYRON C-TECH is a product that shows a balance between clarity and toughness, which differentiates it from SBS type resins on both product cost and taint & odor performance, allowing very significant cost savings. Ambient Plastic continues to replace traditional materials. The reason for this is driven by longer shelf life, lower cost and lighter weight, which contributes to energy savings in transportation. Ambient packaging solutions provide convenient products and increasingly healthy food products, such as baby food, ready meals, pet food, eggs, etc. STYRON A-TECH 1200 provides enhanced stiffness and processing in technical barrier solutions, offering further product weight reduction and blending opportunities over competition, allowing for overall raw material savings for the customer.
Food Service (Extrusion) The food service industry is characterized by an increased need for higher productivity, the arrival of new convenience products and disposable merchandise. Even though over 85% of the product cost is driven by raw material, there is still little product differentiation for this application. Raw material and technology improvements are therefore critically important in this industry. Trinseo addresses this important need with STYRON A-TECH 1200. The product features our leading rubber technology which enhances the balance between stiffness and toughness creating saving opportunities through product weight reduction and increased blending opportunities allowing for both raw material and fabrication savings. High Density Foaming Technology (HDFT) Trinseo has a licensing agreement with MuCell Extrusion to utilize our High Density Foaming Technology (HDFT) which responds to the growing market dynamics within packaging to increase cost competiveness and reduce product weight. HDFT can be used in Dairy and Food Service to improve carbon footprint, through a combined saving of material, energy and waste fees. For Ambient applications, Trinseo proposes HDFT in technical barrier solutions like EVOH to enhance stiffness and reduce cost.
Turning Ideas Into Reality About Trinseo Trinseo is a leading global materials company dedicated to innovate and deliver for its customers. Trinseo s unique product portfolio brings together plastics, latex and rubber businesses that share feed- stocks, operations, customers and end users. The company benefits from global scale, a long-standing tradition of unrivaled customer relationships and a robust innovation pipeline. Plastics Business Division Trinseo Plastics is a business division with a broad plastics portfolio including polystyrene, co-polymers (ABS, SAN), polycarbonate, compounds & blends and automotive plastics. Trinseo Plastics is anchored by a premier polystyrene franchise, a global marketplace leader in polystyrene production. Trinseo Plastics offers innovative and sustainable solutions to customers in industries such as home appliances, automotive, building & construction, commercial transportation, consumer electronics/ information technology equipment (ITE), consumer goods, electrical & lighting, medical and packaging. Trinseo was founded on a unique combination of strong capabilities, including technology leadership, world-class production assets and a global team of technical experts. Building on more than seven decades of manufacturing, commercial and tech- nological expertise, we are passionately focused on delivering high-performance products and innovative thinking to our customers. Widespread Manufacturing Assets Stade, Germany Terneuzen, Netherlands Tessenderlo, Belgium Schkopau, Germany Norrkoeping, Sweden Hamina, Finland Midland, MI Allyn s Point, CT Zhangjiagang, China Boehlen, Germany Livorno, Italy Ulsan, South Korea Rheinmuenster, Germany Dalton, GA Hsinchu, Taiwan Tsing Yi, Hong Kong Merak, Indonesia Plastics Latex Synthetic Rubber Limao, Brazil Guaruja, Brazil
The principles of Responsible Care and Sustainable Development influence the production of printed literature for Trinseo S.A. and its affiliated companies. As a contribution towards the protection of our environments, Trinseo s printed literature is produced in small quantities and on paper containing recovered/ post-consumer fiber and using 100 percent soy-based ink whenever possible. PRODUCT STEWARDSHIP Trinseo and its affiliated companies have a fundamental concern for all who make, distribute, and use their products and for the environment in which we live. This concern is the basis for our Product Stewardship philosophy by which we assess the safety, health, and environmental information on our products so that appropriate steps may be taken to protect employee and public health and our environment. The success of our product stewardship program rests with each and every individual involved with Trinseo products from the initial concept and research, to manufacture, use, sale, disposal, and recycle of each product. CUSTOMER NOTICE Customers are responsible for reviewing their manufacturing processes and their applications of Trinseo products from the standpoint of human health and environmental quality to ensure that Trinseo products are not used in ways for which they are not suitable. Trinseo personnel are available to answer questions and to provide reasonable technical support. Trinseo product literature, including safety data sheets, should be consulted prior to the use of Trinseo products. Current safety data sheets are available from Trinseo. No freedom from infringement of any patent owned by Trinseo or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether products and the information in this document are appropriate for the customer s use and for ensuring that the customer s workplace and disposal practices are in compliance with applicable legal requirements. Although the information herein is provided in good faith and was believed to be accurate when prepared, Trinseo assumes no obligation or liability for the information in this document. NOTICE REGARDING MEDICAL APPLICATION RESTRICTIONS Trinseo requests that customers refer to Trinseo s Medical Application Policy http://www.trinseo.com/medical.htm before considering the use of Trinseo products in medical applications. The restrictions and disclaimers set forth in that policy are incorporated by reference. For more information on products, innovations, expertise, and other services available from Trinseo, visit www.trinseo.com, or contact us as indicated below. North America U.S. U.S. & Canada Latin America Brazil Argentina, Chile, South Region of LAA Mexico, Colombia, North Region of LAA Europe/Middle East/Africa Asia Pacific China Email www.trinseo.com GENERAL NOTICE CIG@trinseo.com Any photographs of end-use applications in this document represent potential end-use applications but do not necessarily represent current commercial applications, nor do they represent an endorsement by Trinseo of the actual products. Further, these photographs are for illustration purposes only and do not reflect either an endorsement or sponsorship of any other manufacturer for a specific potential end-use product or application, or for Trinseo, or for specific products manufactured by Trinseo. If products are described as experimental or developmental : (1) product specifications may not be fully determined; (2) analysis of hazards and caution in handling and use are required; (3) there is greater potential for Trinseo to change specifications and/or discontinue production, and (4) although Trinseo may from time to time provide samples of such products, Trinseo is not obligated to supply or otherwise commercialize such products for any use or application whatsoever. For additional information not covered by the content of this document or to ensure you have the latest version of this document available, please refer to the Customer Information Group contact information on our website at www.trinseo.com/contact/. DISCLAIMER TRINSEO MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, IN THIS DOCUMENT; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE (INCLUDING MEDICAL APPLICATIONS) ARE EXPRESSLY EXCLUDED. TRINSEO DISCLAIMS ANY AND ALL LIABILITY FOR LOSSES OR DAMAGES THAT MAY RESULT FROM THE USE OF TRINSEO PRODUCTS IN UNSUPPORTED USE. TRINSEO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, THAT THE USE OF ANY TRINSEO PRODUCT WILL BE FREE FROM ANY INFRINGEMENT CLAIMS. Copyright Trinseo (2015) All rights reserved. Trademark of Trinseo S.A. or its affiliates Responsible Care is a service mark of the American Chemistry Council Form No. 857-04501