GENISIS 2 Install Guide

Transcription

1 GENISIS 2 Install Guide 1

2

3 GENISIS 2 is a USB-based imaging technology that can convert a wide array of BDR appliances and other hardware into the Datto SIRIS 2 business continuity device. Prerequisites Converting your hardware to a SIRIS 2 appliance using GENISIS 2 is supported on any system that 1. Meets the following minimum hardware specifications: BIOS capable of USB boot Two network interface cards (NICs) with internet connectivity Dual Core 64-bit Processor HDD with at least 250GB free space for the Datto OS Two or more 7200 RPM HDDs to create the storage array RAM as determined by local storage capacity in Table A below 2. Has a combination of motherboard and storage controller found in table B below 3. Has a CPU that is listed in table C. Table A - Minimum RAM Requirements Converted Device Model Minimum RAM (GB) Recommended RAM (GB) S S S S S S S

4 Table B - Supported Motherboard / Storage Combinations Motherboard Storage Motherboard Storage Asus F1A75 Asus M4A88T Dell 015TH9 Dell 03X6X0 Dell 09T7VV Dell 0PM2CW Dell 0PM2CW Dell 0RH817 Poweredge 860 System Board Dell 0TT740 Poweredge 1950 System Board Generation III Dell 5XKKK PowerEdge R310 Dell 5XKKK PowerEdge R310 Dell 6D7TR Optiplex 990 Dell MNFTH Poweredge T310 Dell PowerEdge UR033 Dell PowerEdge UR033 Motherboard Dell PowerEdge 2900 II System Motherboard Dell PowerEdge 2900 II System Motherboard Dell PowerEdge 2900 III Intel Cougar Point 4 Port SATA IDE Nvidia MCP55 Pro SATA controller Intel Cougar Point 4 Port SATA IDE Intel Cougar Point 6 Port SATA AHCI Intel Cougar Point 4 Port SATA IDE Intel 5 Series Chipset and Intel 3400 Series Chipset Intel SATA RAID Intel SATA RAID Intel 5 Series/3400 Series Chipset Intel 631xESB/632xESB I/O Hub Dell PowerEdge RAID (PERC) Intel N10/ICH7 Family SATA IDE Nvidia Corporation MCP55 SATA Dell PowerEdge 2900 III System Motherboard Dell PowerEdge 2900 System Motherboard Dell Poweredge 2950 II System Board Dell Poweredge 2950 II System Board Dell PowerEdge R320 rack server Dell Poweredge R510 Dell PowerEdge RAID H710P Dell PowerEdge RAID H710P MegaRAID i Nvidia MCP55 Pro SATA Dell PowerEdge R520 MegaRAID i Dell PowerEdge R720 MegaRAID i Dell PowerEdge R720 MegaRAID i Dell Poweredge T110 Dell Poweredge T110 V52N7 Intel Cougar Point 6 Port SATA AHCI Intel 5 Series/3400 Series Chipset Dell PowerEdge T320 MegaRAID 9260 Gateway DX4870-UB2B Gigabyte GA-880GA- UD3H Gigabyte GA-880GM- D2H Gigabyte GA-880GM- UD2H Gigabyte GA- MA74GM-S2 Gigabyte GA-X79 Gigabyte GA-X79-UP4 Onboard Onboard Onboard 2

5 Motherboard Storage Motherboard Storage Gigabyte GA-Z68MA Intel Cougar Point 4 Port SATA IDE MSI ZH77A-G43 Intel Corporation SATA RAID Gigabyte Intel H77 Poweredge R510 MegaRAID SAS Gigabyte Intel H77 LGA 1155 AMD Gigabyte Z68MA Intel Motherboard RocketRAID 600 HBA Series Intel Cougar Point 6 Port SATA AHCI IBM 00D9060 MegaRAID i Supermicro Dual AMD Opteron Supermicro H8DA8-2 Supermicro H8SM3-2 Nvidia Corporation MCP55 SATA Nvidia MCP55 Pro SATA Intel Desktop Board DB75EN Supermicro H8SMI-2 Nvidia MCP55 Pro SATA Intel Desktop Board DH61CR Intel Desktop Board DH61CR Intel Desktop Board DQ57TM Intel Desktop Board DQ965GF Intel Desktop Board DQ965GF Intel Server Board S2600GZ Intel Server Board S2600GZ Intel Server Board S3420GP Intel Server Board S3420GPV Lenovo Mahobay MSI 760GM-E51 Intel Cougar 4 Port SATA IDE Intel Cougar Point 6 Port SATA AHCI Intel 5 Series Chipset and Intel 3400 Series Chipset Intel SATA RAID Nvidia MCP55 SATA MegaRAID 9260 Intel 3400 and 3420 Chipsets Intel 5 Series/3400 Series Chipset Intel Cougar Point 4 Port SATA IDE Supermicro H8SMI-2 MegaRAID i Supermicro X8DT6 Supermicro X8DT6 Supermicro X9DRD Supermicro X9DRL-3F Supermicro X9SCi Thunder n3600r Tyan n3400b Tyan n3600r Tyan n3600r Silicon Image, Inc. RAID bus Intel I/O Hub 10 (ICH10) Onboard Intel Cougar Point 4 Port SATA IDE Intel Cougar 4 Port SATA IDE Nvidia MCP55 SATA Nvidia MCP55 Pro SATA Nvidia MCP55 Pro SATA Onboard MSI 760GM-E51 MSI G14M-P23 Intel N10/ICH7 Family SATA IDE 3

6 Table C - Supported CPUs AMD A8-3870K APU AMD Athlon 5000 Dual-Core AMD Athlon 64 X2 Dual Core 4200 AMD Athlon 64 X2 Dual Core AMD Athlon 64 X2 Dual Core 5200 AMD Athlon 64 X2 Dual Core 5400 AMD Opteron 1218 HE AMD Opteron 2360 SE AMD Opteron 1210 AMD Opteron 1214 AMD Opteron 1214 HE AMD Opteron 1216 AMD Opteron 1352 AMD Opteron 1354 AMD Opteron 1356 AMD Opteron 1381 AMD Opteron 1385 AMD Opteron 2214 AMD Opteron 2346 AMD Opteron 6128 AMD Phenom II X4 945 AMD Phenom II X4 960T AMD Phenom(tm) II X4 955 Processor AMD Phenom(tm) II X4 965 Processor AMD Phenom(tm) II X6 1045T Processor AMD Phenom(tm) II X6 1055T Processor AMD Turion II Neo N54L Dual-Core Intel Core i Intel Core i Intel Core i3-530 Intel Core i3-540 Intel Core i Intel Core i Intel Core i Intel Core i Intel Core i

7 Intel Core i Intel Core i5-650 Intel Core i Intel Core i Intel Xeon E Intel Xeon E Intel Xeon E Intel Xeon E Intel Xeon E5-530 Intel Xeon E5-606 Intel Xeon Processor E3-1220V2 Intel Core i Intel Core2 Duo Processor E6300 Intel Pentium 3.00GHz Intel Pentium D Processor 820 Intel Xeon 5140 Intel Xeon 5148 Intel Xeon E Intel Xeon E31240 Intel Xeon E31270 Intel Xeon E5110 Intel Xeon E52430 Intel Xeon E52609 Intel Xeon E52643 Intel Xeon E52648L Intel Xeon E5310 Intel Xeon E5345 Intel Xeon E5405 Intel Xeon E5506 Intel Xeon E5620 Intel Xeon Processor 5130 Intel Xeon Processor 5160 Intel Xeon X3430 Intel Xeon X3440 Intel Xeon X3450 Intel Xeon X3460 5

8 Installation Steps 1. Make sure the device to be imaged has Internet connectivity. 2. Insert the GENISIS 2 USB stick into USB port on the device. 3. Power on the machine with the Datto GENISIS 2 USB stick as the primary boot device. After the system s BIOS POST, the Datto logo will appear on the screen as it loads the core system. 4. Once the boot process is finished, read the terms and conditions and click I Agree to continue. 6

9 5. Once you click Agree, Ready to Image will appear. The Hardware Information of the system is also displayed on this page for reference only. If Datto GENISIS 2 is not able to procure internet connectivity it will display Automated connectivity test failed to run. Simply click the button Test Internet to run this check again and see if the device is capable of finding internet access. If this continues to fail please ensure that the system has a live internet connection with no proxy or firewall filter in place. 6. The next step is to select the Configure Imaging button to proceed to the next step which will configure the system s HDD and RAID configuration. 7

10 7. The Configure Storage page first displays whether the system meets the Datto SIRIS specifications. At the bottom of the Configure Storage page, select which drive(s) will be the Datto OS drive and the desired RAID level. The RAID levels available are based on the number of HDD(s) found in the System. After making your selection, click Confirm Settings. 8. On the next screen, enter the Conversion Code from your GENISIS 2 Invoice and click Verify. Then, click Begin Imaging. 8

11 9. After clicking Begin Imaging, the Deletion Warning box will appear on the screen. Enter the requested phrase to confirm that it is understood that the system will be completely erased and upgraded to a Datto SIRIS. 10. The screen will now refresh and will display the Imaging Your Device page which indicates that the imaging process has begun which averages roughly 30 minutes to completion. 11. When the process completes click the Restart the Device button. Your device is now a SIRIS. Unplug the USB drive and allow the system to boot into the Datto OS. 9

12 2015 Datto, Inc