Cable Operators Overview to JDSU Product Offerings RF, Optical, Metro Ethernet, FTTx, and IP Video, Voice, and Data Services

Transcription

1 COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS Cable Operators Overview to JDSU Product Offerings RF, Optical, Metro Ethernet, FTTx, and IP Video, Voice, and Data Services Cable operators have long trusted Wavetek, T-BERD, and Westover test and measurement products and services for signature features including advanced functionality, reliability, portability, ease of use, and value. Superior customer service and strong support add to the value by helping technicians gain maximum use from JDSU equipment. Conducting complex tests in short time frames without errors and return visits is vital for cable operators to maintain profitability and establish a competitive advantage. JDSU products perform the right tests at the right place at the right time. From network installation and turn-up to service provisioning, troubleshooting, and maintenance, JDSU instruments, systems, and software help operators and technicians quickly roll out VoIP, HDTV, and highspeed data services over converged networks. This guide offers an overview of JDSU test and measurement products and services. Each product is aligned with operators business objectives, and each incorporates application-specific functions and usability features that enhance the end users testing proficiency, accuracy, and speed. For a complete list of solutions, please visit or contact your dedicated sales representative. DSAM Family WEBSITE : T-BERD/MTS Family PathTrak Return Path Monitoring System Fiber Optic Handhelds

2 JDSU Test Solutions for Certifying and Scaling Triple-Play Networks Optical Transport / Fiber Commercial Services Solutions 4 VoIP, IP, and Video Protocol Analzyer Service Assurance PSTN Video Headend Media POP Trunk Media Gateway V V Media POP Trunk Media Gateway Mux VOD Internet CMTS Core IP Network Aggregation Switch Hub Site CMTS CMTS Business HFC Test and Monitoring/ Field Productivity/Field Meters/ Home and Business Networking HFC Network POTS Phone MTA Home Modem Small Business Test and Monitoring Points for Triple-Play Networks and Services To help service providers ensure the quality of experience (QoE) customers expect from voice, video, and data services, JDSU offers solutions to test at every point on the network and at each stage of the life cycle. From economical single-function tools to advanced, multifunction analysis instruments and centralized service assurance solutions, the JDSU portfolio brings providers products that are perfectly matched for the task at hand. Use this diagram to explore the range of possibilities available from JDSU and contact your Sales Engineer to learn more.

3 Optical Transport Solutions 3 T-BERD 8000 The most innovative and cost-effective optical test solution for long-haul and metro networks Based on the rich T-BERD heritage, this field-scalable optical test platform is ideal for both installation and maintenance. A single transport module provides an integrated solution for testing Ethernet, SONET, SDH, PDH, and T-carrier networks up to G while optical modules allow thorough testing of short-haul, long-haul, CWDM, and DWDM networks. The T-BERD 8000, in one compact platform, supports multiple applications including OTDR, fiber characterization, and OSA/ROADM OSA in addition to T-40 G SONET/SDH, Ethernet/IP, TCP/UDP, Fibre Channel, OTN, and /0/Gig/GigE testing. T-BERD/MTS-000A Multi-Services Application Module A rugged, handheld Multi-Services Application Module provides the most compact -GigE multifunction tester in the industry used for the installation and maintenance of Carrier-grade services.the MSAM supports applications ranging from Ethernet and IP SLA verifications (including VPLS/MPLS) to verification of PBT/OAM functionality aimed at verifying true Carrier Ethernet service level agreements (SLAs). It also supports application-centric testing (focused on TCP/UDP) in the presence of background test streams. WaveReady Edge Access Low-cost products for regional, metro, and access optical transport networks WaveReady is a complete family of easy to operate bit-rate and protocol-independent modules, software, and shelves that can be configured to deliver carrier class and enterprise-friendly solutions and are ideal for complementing existing SONET-based networks being challenged to add new services such as video, and VoIP. WaveReady provides a cost-effective solution to adding new fiber to a network and is easy to manage through SNMP and TL-compatible communication modules as well as JDSU Node Manager software. Fiber Inspection & Test 4 Fiber Inspection, Cleaning, & Test kits Inspection, cleaning, and testing From next-generation CATV network installation to managing legacy systems, JDSU provides the most complete and efficient product portfolio in the industry for inspecting and cleaning fiber optic connectors. Achieving optimized performance in today s networks requires technicians to perform systematic and proactive methods for inspecting, cleaning, and testing fiber connectivity. JDSU solutions, such as the FIT-HP3-80, were designed specifically for CATV applications to integrate these essential tools together into a seamless system that enables fast, portable and easy implementation to inspect, clean and test fiber. T-BERD/MTS-4000 The new industry standard for OTDR Mini and lightweight test platform designed for fiber field testing. The first tool that offers service technicians every capability needed to test fiber in access and metro networks as well as the services residing on them. The T-BERD/MTS-4000 offers an unprecedented level of performance in a small form factor and modular solution. It features OTDR, IL/ORL, connector inspection, VFL and Power Level measurements. T-BERD/MTS-000 The compact and lightweight test platform designed for the installation and maintenance of fiber networks It offers field service technicians the highest levels of performance and upgradeability on the market. Modular in design, the 000A offers an extensive portfolio of test functionality, with over 40 different fiber modules supporting a wide range of applications, and is a single source for future fiber and Ethernet/transport testing needs. T-BERD/MTS-8000 The Multi-Application test solution for long-haul and metro networks, fiber characterization, and optical spectrum analysis This field-scalable optical test platform is ideal for both installation and maintenance of fiber optic links and networks. The fiber characterization configuration (Connector inspection, Loss, ORL, OTDR, CD, PMD, and AP) provides a true all-in-one solution for high-speed fiber link qualification. The variety of optical spectrum analyzers makes it the ideal tool for CWDM, DWDM, and ROADM network testing. In addition to fiber testing, the platform supports Ethernet, SONET, SDH, PDH, and T-Carrier network testing up to 40G.

4 8 3 4 SMART optical handhelds that go beyond the basics Services installation and maintenance tool for field technicians SMART optical handhelds for the installation and maintenance of fiber optic systems and networks support the industry s advanced technologies including RFoG, 40 G, and Gigabit Ethernet. Light sources (OLS-), power meters (OLP-/), variable attenuators (OLA-), loss test sets (OLT-), return loss meters (ORL-), and visible fault locators (OVF-) are available to do an efficient job. CWDM OTDRs & Smart Optical Channel Checkers The new OCC family is ideal for CWDM or DWDM testing before turn-up and for first-level maintenance. Allowing optical channel verification by providing wavelength and power level measurements according to the ITU-T grids., the OCC- is the ideal tool for technicians to carry when dealing with CWDM transmission systems. For DWDM transmission, the OCC-C (C-Band) and OCC-L (L-Band) provide the best thetier- solution. With the first CWDM-OTDR solution on the market, it enables users to rapidly, reliably, and cost effectively deploy network services within one convenient package. SmartPocket Optical Handhelds Basic functionalities for fiber optic power measurement and loss testing Including light sources and optical power meters, the JDSU pocket-sized optical handhelds provide accurate measurements in a simple, entry-level unit at an attractive price. Small and lightweight, these handy instruments provide all of the basic functionalities needed for fiber optic power measurement and loss testing. ONMS Optical Network Management System The JDSU ONMS is a remote fiber test system (RFTS) that keeps the network on target 4 hours a day The JDSU Optical Network Management System (ONMS) offers operators significant commercial advantage through increased productivity, reduced network downtime, and easier, faster network provisioning. Commercial Services Solutions T-BERD/MTS-8000 The most innovative and cost-effective optical test solution for long-haul and metro networks A next-generation, modular, and cost-effective platform solution, featuring an innovative design that combines traditional SONET/SDH testing and Ethernet/IP testing all in a single test module. The T-BERD/ MTS-8000 provides physical layer test modules, including optical time domain reflectometer (OTDR), polarization mode dispersion (PMD), and chromatic dispersion (CD) and service-layer test modules, such as GigE and SDH/SONET, to test various FTTx, CWDM and DWDM networks. T-BERD/MTS-8000 Transport Module (Option) The Transport Module features an innovative design that combines traditional SONET/SDH, Ethernet/IP and TCP/UDP testing all in a single module. The Transport Module supports Mb/s to Gb/s Ethernet, ensuring that proven test methodologies for Ethernet services remain the same regardless of the rate. The Transport Module offers a blend of bit error rate testing (BERT) and Ethernet/IP/VPLS/MPLS/TCP/UDP (with multiple streams, patent pending), Fibre Channel, and OTN test capabilities in a superior, portable design. T-BERD/MTS-000A Multi-Services Application Module A rugged, handheld Multi-Services Application Module provides the most compact -GigE multifunction tester in the industry used for the installation and maintenance of Carrier-grade services.the MSAM supports applications ranging from Ethernet and IP SLA verifications (including VPLS/MPLS) to verification of PBT/OAM functionality aimed at verifying true Carrier Ethernet service level agreements (SLAs). It also supports application-centric testing (focused on TCP/UDP) in the presence of background test streams. HST-3000 Handheld Services Tester Modular, portable, and rugged instrument that tests multiple technologies on Metro and Access networks The HST-3000 Handheld Services Tester is a modular, portable, and rugged instrument that tests multiple technologies (including T/E, fiber, and Ethernet). The Ethernet module supports physical layer testing (cable diagnostics), service quality verification (RFC44 at Layers to 4 and Class of Service [CoS]), and application performance analysis (VoIP and IP Video). SmartClass Ethernet Cost-effective, rugged portable test instrument for field technicians who install Ethernet and IP services SmartClass Ethernet provides a complete range of Ethernet test capabilities, including support for cable diagnostics to RFC44 (including Asymmetrical RFC44), Multiple Streams Support, and MPLS, enabling service providers to successfully verify Carrier Ethernet SLAs at installation.

5 0 VoIP, IP, and Video Protocol Analyzers & Probes DA Series Advanced Data/IP Analysis This modular platform is capable of real-time IP analysis, including real-time VoIP analysis (RTP) of up to 4,000 simultaneous calls, call signaling analysis, and application response time analysis for any TCP connection. The analyzer has Gigabyte of capture RAM and can use this function to capture and analyze IP streams off line, including voice playback. Interfaces for this mainframe include electrical Ethernet (/0/G)and G optical; DS/3; OC-3/; and OC-48. PVA-00 PC Software PVA-00 PC software provides full analysis of captured VoIP (RTP) telephone calls, including jitter, packet loss, and calculates MOS (Mean Opinion Score) for each call with emulation of various jitter buffers. PVA-00 also includes audio playback capability and storage of conversations as.wav files. DTS-330 Advanced digital video monitoring and analysis tool that supports MPEG-/4,DVB, and ATSC standards The DTS-330 is the perfect tool for troubleshooting difficult to resolve problems using advanced detailed analysis. The DTS-330 supports COFDM, QPSK, 8VSB, QAM, GbE, ASI, SPI, and SMPTE in a portable unit. The DTS-330 is a flexible, portable, and powerful troubleshooting tool that can be used both in the field or in the lab. MVP-00 Advanced digital video monitoring and analysis tools that support MPEG-/4,DVB, and ATSC standards. Through the JDSU SimulTrack II application the MVP-00 supports 4x monitoring of all Transport Streams and programs on a fully utilized Gigabit Ethernet circuit. TR -0 monitoring is enhanced with Timing health monitoring of PCR accuracy, jitter, offset, and drift for all programs eliminating the need to scan through programs. In addition, detailed analysis of tables and metadata is available on demand. The MVP-00 is a full system probe with analysis on-demand capabilities and an open API for integration into a monitoring system. 83 and 83 Signaling Protocol Analyzers Protocol analysis of traditional signalling techologies SS, GR303, and ISDN, and VoIP to ensure that your cable plant enabled digital voice offering can interface with the public switched telephone network (PSTN) The 83 and 83 platforms perform local and remote analysis of traditional voice signaling systems. Equipped with to 0 T interfaces, they can monitor as many as 30 channels of SS in a portable platform. The protocols are fully decoded in summary and detailed formats. A powerful and flexible event counter tool allows the user to define what statistics and performance indicators are most important. Also, the Call Trace functionality across multiple interfaces enables troubleshooting to the level of the individual site or subscriber and results can be exported for collaborative troubleshooting activity. Service Assurance Solutions NetComplete Ethernet Test & Troubleshooting A standards based, centralized test and troubleshooting solution for Ethernet, including business class services and mobile backhaul The NetComplete Ethernet Test and Troubleshooting application enables service providers to reduce operating expenses by simplifying the circuit turn-up and test and troubleshooting process. Comprised of the QT-00 Ethernet probe centrally managed by NetAnalyst test OSS software, NetComplete delivers a centralized automated approach. Using standardized tests such a ping, traceroute, RFC-44 and 80.ag loopback and linktrace, service providers can rapidly segment the network and pinpoint fault location reducing the number of dispatches required to find the problem. Being part of the JDSU Ethernet portfolio also ensures seamless integration with the JDSU portfolio of Ethernet handhelds and portables. Furthering its troubleshooting capabilities, the QT-00 can passively monitor customer traffic with near real-time analysis highlighting utilization trends, top talkers, protocols etc..and allows service providers to drill down into the data by applying sophisticated filters and triggers to troubleshoot more complex issues.

6 reduced opex efficiency management reports test reporting meter configuration NetComplete Ethernet Performance Monitoring A comprehensive monitoring system for managing Ethernet business and mobile backhaul services over a heterogeneous core network The NetComplete Ethernet Performance Management application allows service providers to costeffectively scale their network and operational resources as service penetration increases by centralizing monitoring and providing automatic analysis of raw performance data. Consisting of the NetComplete Performance Monitoring OSS and EtherNID demarcation devices, Ethernet services providers use the graphical views and reports generated to proactively monitor network and customer Ethernet quality of service (QoS) to ensure service level agreements (SLAs) are consistently being met. And they use them reactively to help network operations technicians troubleshoot problems quickly and effectively. The EtherNID demarcation device provides customer premises Ethernet service demarcation, including loopback support, performance monitoring, and optional service definition and traffic conditioning. CENTEST TM 0 The CENTEST product family consists of two rack-mounted single-shelf systems Slots for multiple test cards, including Application Test Cards in the CENTEST 0-S and cards in the CENTEST 0, test for various applications including DS0, FT, DS, DS3 and STS-. The CT-0/0-S systems, in conjunction with NetAnalyst, remotely monitor and test circuits for provisioning as well as ongoing maintenance, so providers can quickly identify network trouble spots and efficiently direct maintenance resources from one centralized location. With the CT-0/0-S and NetAnalyst, providers can reduce field dispatches and respond more quickly to customers. PathTrak HFC Monitoring Solutions PathTrak Video Monitoring System This RF monitoring systems monitors analog and digital video channels as well as DOCSIS channels to ensure they meet RF performance standards including level, MER and BER. In addition it monitors MPEG parameters to ensure the video is clean. This capability eliminates routine checks at remote hub sites as well as significantly reduces mean time to repair by enabling rapid segmentation of problems between the inside and outside plant. PathTrak Return Path Monitoring Monitor the return path to quickly identify issues which affect two-way services including VoIP, video on demand and high speed data. This system not only identifies ingress and impulse noise, it can find other impairments such as group delay and microreflections which are undetectable by spectrum-based systems. This information is used to notify operators of issues requiring immediate attention, as well as to rank nodes for maintenance prioritization to prevent service disruption. Using Field View with DSAM meters, it also allows maintenance technicians to quickly segment ingress issues for rapid problem resolution. TechComplete Field Productivity Solutions TechComplete Test Productivity Pack Most comprehensive and proven work force efficiency software supporting the DSAM from JDSU The Test Productivity Pack promotes and provides consistent testing by technicians, flexible reporting and powerful analysis for managers and supervisors, and remote management of assets, configuration, and test equipment in the field. A TechComplete Field Productivity Solution. TechComplete Home Certification Testing Solution Automated home certification testing, reduced capital expenditures, and the elimination of costly rework The powerful combination of DSAM test instruments and customized test scripts establish consistent and clear procedures for home certification testing, enabling operators to significantly reduce repeat service call rates. Results are uploaded immediately to a central database and integrated with work order detail, providing supervisors with reports on the test data and insight into field staff productivity, efficiency, and accuracy. A TechComplete Field Productivity Solution. asset and user management

7 Wavetek Series Field Meter Solutions DSAM Powerful testing and analysis of DOCSIS 3.0 digital video, VoIP and Stealth Sweep in one handheld meter. DSAM meters are compact, multi-functional instruments designed to meet the testing needs of installation/ fulfillment, service, maintenance and sweep technicians. Deploying DOCSIS 3.0 services, digital video, or upgrading and maintaining a GHz plant is simplified with the DSAM. The DSAM s home certification option helps improve overall service health and reduces call backs. DSAM is a Wavetek Series Field Meter SDA-000 A rugged device for forward and return path testing and advanced digital analysis This weather-resistant, lightweight meter is ideal for testing the latest digital services as well as for analyzing and maintaining the forward and return spectrum using a to,000 MHz fast, sensitive spectrum analyzer. Optional QAM analysis and non-interfering forward and reverse sweep ensure the integrity of the HFC network and prepare it for interactive services. SDA is a Wavetek Series Field Meter. MicroStealth QAM The MicroStealth QAM (MSQ) gives field technicians a single tool to help ensure the quality of digital cable services in minutes. It s a simplified icon-based user interface that reduces training time from weeks to hours. All tests can be reached within one button press from the main menu. Although simple and compact, the MSQ provides all the necessary tests to verify digital and analog cable services Installer Tools for Voice and Data Troubleshooting in the Home/Business Full range of tools including workflow-driven combination testers: Voice service verification Telephone Test Sets Ensure dial tone and verify services like caller ID with the lightweight Ranger (LB0-BT) and Lil Buttie Pro (LB0-BT) telephone test sets with LCD. Cabling testing Tones and Probes and Cable Testers Locate and verify twisted pair, coax and network cable with Tonax tone generator (TG4). Test wiremapping, identify opens, split pairs, continuity, and measure length with TestifierPRO cable tester (TP0 or TP). Network connectivity testing Network Testers and Multi-Function Testers Perform network testing with ping, port discovery, and hub flash with the Validator-line Validator-NT Ethernet speed certifier (NT), ValidatorPRO-NT Ethernet speed certifier with integrated optical power meter (NT) Test physical wiring for triple-play Voice, data, and video with the Tri-Porter premises wiring tester (IVT00) Tri-Porter performs work of multiple testing tools: telephone test set, dial tone simulator, network tester, tone generator (will tone through coax splitters), cable tester/verifier, probe with current mode for coax, and coax mapper. IW-00 The SmartClass IW-00 handheld service meter enables verification of internal wiring at the customer premises for proper operation of voice, video, and data services. The IW-00 is used to test the coax and twisted pair wiring inside the home, in multiple dwelling units (MDUs), and in small-to-medium-sized businesses (SMBs), providing an easy-to-use, accurate, and economical measurement tool for service technicians installing or troubleshooting triple-play services over existing or new networks.

8 COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS JDSU Services JDSU Certified Equipment The ACE Program provides a reliable source for used equipment This program guarantees that used JDSU equipment meets original specifications, allowing ACE products to be purchased with the same confidence as when purchasing new equipment. Product Support Services A single source for maintaining quality and improved management Extended Warranty Options include extending the standard warranty of a product or purchasing additional coverage for products with expired warranties. Also, extended warranties for a group of test instruments can be prorated so warranties expire at the same time. Calibration and Calibration Management On-site or return-to-factory calibration of instruments provides a convenient, one-stop solution for all calibration and calibration management requirements. Repair A group of strategic partners provides repair and repair management services for test equipment and general instrumentation products used to support networks, establishing confidence that all provided services conform to quality and accountability standards. Asset Management The use of asset management software, RFID, bar-coding, and on-site services make tracking equipment and managing staff more efficient and effective. Consulting Services Operational Process Re-Engineering (OPR) The OPR Consulting Practice has extensive expertise in the deployment and optimization of OSS infrastructure and operational processes, and works with operators to identify gaps in the OSS infrastructure, operational models, and processes and procedures supporting the deployment of services. OPR also works to deploy OS system elements, including developing functional requirements defining OS system capabilities and integration with the existing operations environment, and developing detailed methods and procedures required for day-today operation of the OS system. This expertise enables the OPR practice to help cable operators overcome the obstacles associated with measuring service performance, identifying performance degradation, and delivering on the requirements of Carrier-grade SLAs. Education Services Workforce development and technical training Education Services include a wide array of courses ranging from product training to fundamentals and test applications. Classes guarantee staff will gain job skills and technical knowledge that improve on-the-job performance. Course formats include public training, on-site training, virtual classroom, and self-paced training. Test Automation Improved effectiveness and accuracy Custom test automation software streamlines methods and procedures and allows testing to be performed more efficiently and with fewer resources. Test & Measurement Regional Sales NORTH AMERICA TEL: FAX: LATIN AMERICA TEL: FAX: ASIA PACIFIC TEL: FAX: EMEA TEL: +4 8 FAX: Product specifications and descriptions in this document subject to change without notice. 0 JDS Uniphase Corporation CABLESELECT.SG.CAB.TM.AE February 0