ISO xx STEP. Sommaire. étendue. STandard for the Exchange of Product model data. Hervé Panetto CRAN nancy.
|
|
- Catherine Glenn
- 8 years ago
- Views:
Transcription
1 ISO xx STEP STandard for the Exchange of Product model data Hervé Panetto CRAN nancy.fr Sommaire 1. Architecture 2. Un protocole d application : AP Conclusions : STEP et l entreprise étendue
2 ISO STEP STandard for the Exchange of Product data model Série de standards supportant l ensemble des fonctions en relation avec les produits Echange,, mémorisation, archivage, accès Utilisé principalement pour l échange de données concernant les produits Le cœur de STEP est un ensemble de modèles standardisés par domaine d application Application protocols (AP s) STEP au Sein des Echanges de Données Volume % IGES 3D STEP AP203/214 DXF + IGES 2D Temps «STEP Works» Le 2D fait de la résistance IGES est un mourant qui se porte bien
3 STEP = STandard for the Exchange of Product model data Description methods 11 The EXPRESS language reference manual Implementation methods 21 Clear text encoding of the exchange structure 22 Standard data access interface specification (SDAI) 28 XML representation of Express schemas and data Conformance testing 31 General concepts 32 Requirements on testing laboratories and clients Generic resources 41 Fundamental of product description and support 42 Geometric and topological representation 43 Representation structures 44 Product structure configuration 45 Materials 46 Visual presentation 47 Shape tolerances 49 Process structure and properties Application resources 101 Draughting AICs 501 Edge based wireframe rep Application protocols 201 Explicit draughting 202 Associative draughting 203 Configuration controlled design 210 Electronic assembly, interconnection and packaging design 212 Electrotechnical design and installation 214 Core data for automotive mechanical design processes 221 Functional data for process plants 232 Technical data packaging core information and exchange 236 Furniture catalog and interior design 239 Product Life cycle support Protocole d Application 214 Core Data for Automotive Mechanical Design Processes Géométrie Données Solides Données Surfaciques Données Filaires Données Mesurées Analyse Simulation Cinématique Spécification/Configuration Gestion de la Diversité Données de Structure Produit Présentation Dessin Technique Données de Visualisation Fabrication Gammes de Fabrication Moyens de Fabrication Données Technologiques Données de Matériaux Form Features Données de Tolérancement Conditions de Surface
4 STEP AP214 Core data for automotive mechanical design processes Tools and development of method plan Manufacturing NC programming Documentation Product data Kinematics and robotic simulation Production planning Design Design of parts and assemblies Part lists, Bill-of-material Quality check AP214 au Sein de STEP AP214 AP203 Extensions Colors Layers Geometry Topology PDM Extensions Validation Properties AP203 Aéronautique US / PDES Inc. Approche par extension Noyau + Extensions AP214 Automobile Europe / ProStep Approche par discipline «Ce qu il faut»
5 AP214 IS version content: overview S6 classification item (part) item (tool) specification_ control management_data version work_ S5 management S8 process_plan item_ property PR1 item_ S3 definition_structure definition external_ E1 references S4 effectivity P1/2/3/D1 drawing/ presentation S2 element_ structure associative_ D2 annotation surface_ C1 condition tolerance T1/2 form_ FF1/2/3 feature kinematics K1 D1/P2 explicit_ draughting G1 G2/MD1 3D_ 2D_geometry wireframe G3/8 surface B-rep G4/5 CSG G7 AP214 Units of Functionality (UoFs) S : Product Structure (8 UoFs) - product management data () - work management (S5) - element structure (S2) - classification (S6) - item definition structure (S3) - specification control () - effectivity (S4) - process plan (S8) G: Geometry (8 UoFs) - wireframe model 2D (G1) - b rep model (G5) - wireframe model 3D (G2) - compound model (G6) - connected surface model (G3) - csg model (G7) - faceted b rep model (G4) - geometrically bounded surface model (G8) MD: Measured Data (1 UoF) - measured data (MD1) PR: Property (1 UoF) - item property (PR1)
6 AP214 Units of Functionality (UoFs) P: Presentation (3 UoFs) - geometric presentation (P1) - shaded presentation (P3) - annotated presentation (P2) D: Draughting - explicit draughting (D1) (2 UoFs) - associative draughting (D2) K: Kinematics - kinematics (K1) (1 UoF) FF: Form Features (3 UoFs) - user defined feature (FF1) - generative featured shape (FF3) - included feature (FF2) C: Surface Condition - surface condition (C1) (1 UoF) T: Tolerances - dimension tolerances (T1) (2 UoFs) - geometric tolerances (T2) E: External Reference (1 UoF) - external reference mechanism (E1) AP214 Product structure and configuration (UoFs) product management data (), e.g. identification of product and product version, item definition structure (S3), e.g. assembly structure, effectivity (S4), e.g. start and end date for effective part usage, work management (S5), e.g. change management with work orders, classification (S6), e.g. part classification like in the PLIB standard, specification control (), e.g. managing product variations through conditions, process plan (S8), item property (PR1), e.g. mass, material, and other product properties, external reference mechanism (E1), e.g. for document management.
7 AP214 IS version content: overview S6 classification item (part) item (tool) specification_ control management_data version work_ S5 management S8 process_plan item_ PR1 property item_ S3 definition_structure definition external_ E1 references S4 effectivity P1/2/3/D1 drawing/ presentation S2 element_ structure associative_ D2 annotation surface_ C1 condition tolerance T1/2 form_ FF1/2/3 feature kinematics K1 D1/P2 explicit_ draughting G1 G2/MD1 3D_ 2D_geometry wireframe G3/8 surface B-rep G4/5 CSG G7 AP214 Product structure and configuration Why is this area so important? main information structures for product development no other standard is available in this area with increasing role of main suppliers (tier1) Bills of Material (BoMs) have to be exchanged Goal: the complete documentation of the product to be delivered in digital form, i.e. mainly the BoM structures data typically cross systems boundaries with no or little data integration,, e.g. assembly definitions in CAD and EDM systems for Digital Mockup applications (DMU) the STEP data model may serve as - an integration factor for today s systems - a guideline for future systems
8 AP214 UoF : overview and main ARM concepts product structure complex_ relationship (ABS) complex_ product structure_ relationship (ABS) constituent collection of products with same or similar characteristics class product characteristics and their dependencies S[1:?] functional design / requirements function product or component including all variants one variant (explicit rep.) alternative_ solution part or tool (implicit) specification identification manufacturable part or tool w/o variation (explicit) assembly_ component_ relationship item item_ version physically realized product or component (with serial #) specification_ expression specification specification_ category component item_ instance design_disc_ item_definition physical_ instance S3... configuration control of part / variant usage (validity) AP214 UoF : main concepts product classes are used to identify a set of similar products to be offered to the market, specifications are used to describe characteristics of the products, specification categories are used to group similar characteristics of the products, specification expressions are used to control the usage of a part within a product and to represent conditions for product classes, product functions are used to describe the functional requirements for products and components of products, product components are used to describe the common decomposition structure of all products of a product class,
9 AP214 UoF : main concepts alternative solutions are used to describe the variants of a product component, item instances are used to identify elements of an alternative solution, i.e. the t elements of a particular variant for a product component, design discipline item definitions are used to identify and describe parts or assemblies explicitly with their definitions, e.g. the geometric shape, for item instances product specifications are used to identify parts or assemblies as well as complete products implicitly by the product class and the chosen specifications physical instances are used to identify specific physically realized products or components, e.g. a chassis with a serial number. requires STEP resource Part 44 extensions Conclusions : STEP et l entreprise étendue Interopérabilité «Horizontale» Inter-services intra-entreprise Inter-entreprises entreprises en réseaux Géométrie (2D, 3D) PDM (Gestion technique) Documentation
11/11/2014. Sharif University of Technology. Session # 9. Computer-Aided Design (CAD) Department of Industrial Engineering. Geometric modeling
Advanced Manufacturing Laboratory Department of Industrial Engineering Sharif University of Technology Session # 9 Computer-Aided Design (CAD) Geometric modeling Geometric modeling techniques 2 1 Features
More informationComité Ingénierie GALIA. Boulogne-Billancourt, 11 Juin 2009
Comité Ingénierie GALIA Boulogne-Billancourt, 11 Juin 2009 Dassault Systèmes membre de GALIA Notre motivation Etre à l écoute de nos clients sur les enjeux des échanges entre OEM et fournisseurs Supporter
More informationAFNeT STEP AP242 Benchmark
e AFNeT STEP AP242 Benchmark Test report for the STEP AP242 Benchmark #1 Short Report September 2015 Preamble AFNeT mission is to promote the use of digital technologies in the extended enterprise. The
More information5. Product Lifecycle Management. Database Technologies for Integrating Engineering Data
5. Product Lifecycle Management Database Technologies for Integrating Engineering Data Overview Motivation The Product Lifecycle The Product Development Process Islands of Automation Overview of Product
More informationPRODAEC INTEROPERABILITY. ISO TC 184 «Industrial Automation Systems and Integration» LIRIS Laboratory -LYON ------
PRODAEC INTEROPERABILITY ISO TC 184 «Industrial Automation Systems and Integration» LIRIS Laboratory -LYON March 29th, 2004 ------ Jean Marc Chatelard ISO TC 184 Chairman FR-ISO-chatelard@mail.schneider.fr
More informationSun Management Center Change Manager 1.0.1 Release Notes
Sun Management Center Change Manager 1.0.1 Release Notes Sun Microsystems, Inc. 4150 Network Circle Santa Clara, CA 95054 U.S.A. Part No: 817 0891 10 May 2003 Copyright 2003 Sun Microsystems, Inc. 4150
More informationCAD/CAM and the Exchange of Product Data
CAD/CAM and the Exchange of Product Data N.-J. Høimyr CERN, Geneva, Switzerland Abstract A 3D model defined in a CAD-system is used as a basis for design and product development. The concept of Computer
More informationWhite Paper. PROSTEP AG Dolivostrasse 11 64293 Darmstadt Germany Phone +49 6151 9287-0 Fax +49 6151 9287-326 info@prostep.com www.prostep.
White Paper 3D Formats in the Field of Engineering a Comparison When the source system is not available, too costly to propagate widely, or full model fidelity is not required, neutral 3D formats are essential
More informationComputer Aided Systems
5 Computer Aided Systems Ivan Kuric Prof. Ivan Kuric, University of Zilina, Faculty of Mechanical Engineering, Department of Machining and Automation, Slovak republic, ivan.kuric@fstroj.utc.sk 1.1 Introduction
More informationCAD Model Validation in the Product Life Cycle Management
CAD Model Validation in the Product Life Cycle Management CAPVIDIA CEO Tomasz Luniewski BOEING is a trademark of Boeing Management Company. GPDIS_Template_2009.ppt 9/23/2009 1 Company Introduction Founded
More informationReconstruction d un modèle géométrique à partir d un maillage 3D issu d un scanner surfacique
Reconstruction d un modèle géométrique à partir d un maillage 3D issu d un scanner surfacique Silvère Gauthier R. Bénière, W. Puech, G. Pouessel, G. Subsol LIRMM, CNRS, Université Montpellier, France C4W,
More informationProduct Data Exchange
Produktdatenaustausch Teil 1: Austausch von Baugruppen Part 1: Assembly Data Exchange 4956 Part 1: Assembly Data Exchange Version 1.1 Die Empfehlung wurde entwickelt in Zusammenarbeit mit dem ProSTEP ivip
More informationwith Interoperability
Simulation Data Management with Interoperability across domains Andreas Schreiber Matthias Grau Paul Downing PROSTEP AG Dolivostraße 11 64293 Darmstadt www.prostep.com Company Information Since it s foundation
More informationIl est repris ci-dessous sans aucune complétude - quelques éléments de cet article, dont il est fait des citations (texte entre guillemets).
Modélisation déclarative et sémantique, ontologies, assemblage et intégration de modèles, génération de code Declarative and semantic modelling, ontologies, model linking and integration, code generation
More informationSimulation Data Management with Interoperability across domains
Simulation Data Management with Interoperability across domains Matthias Grau PROSTEP PROSTEP AG Dolivostraße 11 64293 Darmstadt www.prostep.com PROSTEP AG 2007 Introduction CAE today is used increasingly
More informationCHAPTER 1. Introduction to CAD/CAM/CAE Systems
CHAPTER 1 1.1 OVERVIEW Introduction to CAD/CAM/CAE Systems Today s industries cannot survive worldwide competition unless they introduce new products with better quality (quality, Q), at lower cost (cost,
More informationPersonnalisez votre intérieur avec les revêtements imprimés ALYOS design
Plafond tendu à froid ALYOS technology ALYOS technology vous propose un ensemble de solutions techniques pour vos intérieurs. Spécialiste dans le domaine du plafond tendu, nous avons conçu et développé
More informationIntroduction au BIM. ESEB 38170 Seyssinet-Pariset Economie de la construction email : contact@eseb.fr
Quel est l objectif? 1 La France n est pas le seul pays impliqué 2 Une démarche obligatoire 3 Une organisation plus efficace 4 Le contexte 5 Risque d erreur INTERVENANTS : - Architecte - Économiste - Contrôleur
More informationSunFDDI 6.0 on the Sun Enterprise 10000 Server
SunFDDI 6.0 on the Sun Enterprise 10000 Server Sun Microsystems, Inc. 901 San Antonio Road Palo Alto, CA 94303-4900 USA 650 960-1300 Fax 650 969-9131 Part No.: 806-3610-11 November 1999, Revision A Send
More informationDesign & Drafting Services
Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material
More informationStart Here. Installation and Documentation Reference. Sun StorEdgeTM 6120 Array
Start Here Installation and Documentation Reference Sun StorEdgeTM 6120 Array 1 Access the Online Documentation These documents and other related documents are available online at http://www.sun.com/documentation
More informationGLOBAL PRODUCT CONCEPT AND THE SUPPLIERS INVOLVEMENT: A CASE STUDY IN THE HEAVY TRUCK INDUSTRY
ONZIEME RENCONTRE INTERNATIONALE DU GERPISA ELEVENTH GERPISA INTERNATIONAL COLLOQUIUM Les acteurs de l entreprise à la recherche de nouveaux compromis? Construire le schéma d analyse du GERPISA Company
More informationNote concernant votre accord de souscription au service «Trusted Certificate Service» (TCS)
Note concernant votre accord de souscription au service «Trusted Certificate Service» (TCS) Veuillez vérifier les éléments suivants avant de nous soumettre votre accord : 1. Vous avez bien lu et paraphé
More informationCATIA V5 ELECTRICAL DOMAIN OVERVIEW
CATIA V5 ELECTRICAL DOMAIN OVERVIEW Presentation objectives Give an overview of the electrical process and the positioning of the CATIA V5 electrical products Describe and explain the CATIA V5 electrical
More informationCAD/CAE interoperability, an automatic generation of Analysis Model based on idealization of CAD geometry
CAD/CAE interoperability, an automatic generation of Analysis Model based on idealization of CAD geometry M. HAMDI a, N. AIFAOUI a, B. LOUHICHI a, A. BENAMARA a a. Laboratoire de Génie Mécanique Lab-Ma-05,
More informationBUSINESS PROCESS OPTIMIZATION. OPTIMIZATION DES PROCESSUS D ENTERPRISE Comment d aborder la qualité en améliorant le processus
BUSINESS PROCESS OPTIMIZATION How to Approach Quality by Improving the Process OPTIMIZATION DES PROCESSUS D ENTERPRISE Comment d aborder la qualité en améliorant le processus Business Diamond / Le losange
More informationPower Distribution System. Additional Information on page 2 See Page 2 Page 6. Eaton. See Page 2. Additional Information on page 2
IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI D ACCEPTATION MUTUELLE DE CERTIFICATS D ESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE
More informationLessons learned developing protocols for the industrial virtual enterprise
COMPUTER-AIDED DESIGN Computer-Aided Design 32 (2000) 159 166 www.elsevier.com/locate/cad Lessons learned developing protocols for the industrial virtual enterprise M. Hardwick a, *, K.C. Morris b, D.L.
More informationIt s all about Interoperability
It s all about Interoperability ProSTEP ivip Standardization Activities: JT & STEP Dr. Steven Vettermann ProSTEP ivip Association SEPTEMBER 12-14 2010 International Conference Hosted by Overview Introducing
More informationCourse Description. Spring 2004 1
Spring 2004 1 Course Description AE4375: advanced treatment for undergrads; focus on learning and aplying CAD to engineering; CAD modeling projects. AE6380: graduate course on CAD focusing on how tools
More informationXML-based Web Service for Collaborative Product Data Management
XML-based Web Service for Collaborative Product Data Management Mario Štorga 1, Dorian Marjanovic 1, Nenad Bojcetic 1 1 Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, 10000 Zagreb,
More informationMultiCAx Products. encad consulting GmbH www.encad-consulting.de info@encad-consulting.de
MultiCAx Products www.encad-consulting.de info@encad-consulting.de Customer needs in Data Exchange 1. Exchange CAD data with subcontractors 2. Archive reference product data 3. Make design review with
More informationRETURN RESPONSES TO: RETOURNER LES ANSWERS À :
RETURN RESPONSES TO: RETOURNER LES ANSWERS À : Solinda Phan Specialiste d approvisionnement Supply Specialist Services partagés Canada Shared Services Canada Email Address Courriel: ConsultationSPC.SSCConsultation@
More informationWhite Paper for the creation of the PDM Implementor Forum
White Paper for the creation of the PDM Implementor Forum Version 1.2 29/01/2015 PDM-IF White Paper 29/01/2015 1 Table of Contents Document history... 4 1 Executive summary... 5 2 Introduction... 7 3 Terms
More informationProSTEP ivip/vda 2. JT Translator Benchmark
ProSTEP ivip/vda 2. JT Translator Benchmark 2. JT TRANSLATOR BENCHMARK SHORT REPORT 2. JT Translator Benchmark SHORT REPORT CONTENTS Contents 1 Introduction 4 2 ProSTEP ivip/vda JT Translator Benchmark
More informationChallenges of Requirements Modelling in the Product Development Process
Challenges of Requirements Modelling in the Product Development Process - Integrated Requirements Modelling DI Michael Maletz michael.maletz@virtuellesfahrzeug.at ProSTEP ivip Symposium 2006 Köln, April
More informationME 521 Computer Aided Design. 1. Introduction to CAD
Computer Aided Design Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü Basic Definitions CAD: Computer Aided Design is the use of computer technology for
More informationIntegrated Modeling for Data Integrity in Product Change Management
Integrated Modeling for Data Integrity in Product Change Management László Horváth*, Imre J. Rudas** Institute of Intelligent Engineering Systems, John von Neumann Faculty of Informatics, Budapest Tech
More informationMemory Eye SSTIC 2011. Yoann Guillot. Sogeti / ESEC R&D yoann.guillot(at)sogeti.com
Memory Eye SSTIC 2011 Yoann Guillot Sogeti / ESEC R&D yoann.guillot(at)sogeti.com Y. Guillot Memory Eye 2/33 Plan 1 2 3 4 Y. Guillot Memory Eye 3/33 Memory Eye Analyse globale d un programme Un outil pour
More informationREFERENTIEL- SODERN. Autre référence / Other reference :
Classification: NC Page : 1/8 Autre référence / Other reference : Type: Sector procedureprocédure sectorielle. Description: Exigences qualité pour les fournisseurs de Sodern version anglaise / Quality
More informationSun StorEdge RAID Manager 6.2.21 Release Notes
Sun StorEdge RAID Manager 6.2.21 Release Notes formicrosoftwindowsnt Sun Microsystems, Inc. 901 San Antonio Road Palo Alto, CA 94303-4900 USA 650 960-1300 Fax 650 969-9131 Part No. 805-6890-11 November
More informationEnterprise resource planning Product life-cycle management Information systems in industry ELEC-E8113
Enterprise resource planning Product life-cycle management Information systems in industry ELEC-E8113 Contents Enterprise resource planning (ERP) Product data management (PDM) Product lifecycle management
More informationAdministrer les solutions Citrix XenApp et XenDesktop 7.6 CXD-203
Administrer les solutions Citrix XenApp XenDesktop 7.6 CXD-203 MIEL Centre Agréé : N 11 91 03 54 591 Pour contacter le service formation : 01 60 19 16 27 Pour consulter le planning des formations : www.miel.fr/formation
More informationProduct Data Management
Product Data Management Introduction to Product Data Management Product data means in this context in principle all the information that is somehow relevant to the product. Under here are examples of product
More informationSun StorEdge A5000 Installation Guide
Sun StorEdge A5000 Installation Guide for Windows NT Server 4.0 Sun Microsystems, Inc. 901 San Antonio Road Palo Alto, CA 94303-4900 USA 650 960-1300 Fax 650 969-9131 Part No. 805-7273-11 October 1998,
More informationLes nouveautés 2014 mise en lumière
Les nouveautés 2014 mise en lumière Raymond Papaux HP Networking Hervé Gaudin HP Storage Réseaux convergés LAN et SAN pour PME Choix de SAN Quels en sont les critères? Server A Server B Switch A Switch
More informationFINAL DRAFT INTERNATIONAL STANDARD
PROJECT IEC 61975 Edition 1.0 2010-05 FINAL DRAFT INTERNATIONAL STANDARD High-voltage direct current (HVDC) installations System tests INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.130.01; 31.080.01
More information- 343 - PIXEL-PLANES: A VLSI-ORIENTED DESIGN FOR 3-D RASTER GRAPHICS. H. Fuchs and J. Pou1ton. University of North Carolina at Chapel Hill
- 343 - PIXEL-PLANES: A VLSI-ORIENTED DESIGN FOR 3-D RASTER GRAPHICS H. Fuchs and J. Pou1ton University of North Carolina at Chapel Hill ABSTRACT We present here the design for a machine which can rapidly
More informationComparaison et analyse des labels de durabilité pour la montagne, en Europe et dans le monde.
Labels Touristiques Européens Comparaison et analyse des labels de durabilité pour la montagne, en Europe et dans le monde. Prof. Dr. Tobias Luthe November 2013 Structure de la presentation 1. L eventail
More informationFINAL DRAFT INTERNATIONAL STANDARD
IEC 62047-15 Edition 1.0 2014-12 FINAL DRAFT INTERNATIONAL STANDARD colour inside Semiconductor devices Micro-electromechanical devices Part 15: Test method of bonding strength between PDMS and glass INTERNATIONAL
More informationToolkit in OPen-source for Critical Applications & SystEms Development
Toolkit in OPen-source for Critical Applications & SystEms Development Patrick Farail AIRBUS France patrick.farail@airbus.com June 05 - IRISATECH 1 A limited market - Long life Products Uncertain suppliers
More informationStockage distribué sous Linux
Félix Simon Ludovic Gauthier IUT Nancy-Charlemagne - LP ASRALL Mars 2009 1 / 18 Introduction Répartition sur plusieurs machines Accessibilité depuis plusieurs clients Vu comme un seul et énorme espace
More informationComputer Aided Design and Drafting (CAD)
Oakland Community College 2015-2016 Catalog 1 Computer Aided Design and Drafting (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well as
More informationOslo, July 8, 2005. Fredrik Lied Larsen
Preface This master thesis was written at the Norwegian University of Science and Technology (NTNU) at the Department of Computer and Information Science (IDI). The thesis was written at a request from
More informationIntroduction ToIP/Asterisk Quelques applications Trixbox/FOP Autres distributions Conclusion. Asterisk et la ToIP. Projet tuteuré
Asterisk et la ToIP Projet tuteuré Luis Alonso Domínguez López, Romain Gegout, Quentin Hourlier, Benoit Henryon IUT Charlemagne, Licence ASRALL 2008-2009 31 mars 2009 Asterisk et la ToIP 31 mars 2009 1
More informationA web-based multilingual help desk
LTC-Communicator: A web-based multilingual help desk Nigel Goffe The Language Technology Centre Ltd Kingston upon Thames Abstract Software vendors operating in international markets face two problems:
More informationGuide Share France Groupe de Travail MQ sept 2013
Guide Share France Groupe de Travail MQ sept 2013 Carl Farkas Pan-EMEA zwebsphere Application Integration Consultant IBM France D/2708 Paris, France Internet : farkas@fr.ibm.com 2013 IBM Corporation p1
More informationPTC Creo View. A Solution for Enterprise Validation and Review. October 2013
October 2013 CIMdata, Inc. 3909 Research Park Drive Ann Arbor, MI 48108 +1 734.668.9922 www.cimdata.com PTC Creo View Digital data content, previously the private domain of design and manufacturing engineers,
More informationHydraulic efficiency of macro-inlets
Hydraulic efficiency of macro-inlets Efficacité hydraulique des grands avaloirs à grilles Manuel Gómez Valentín, Beniamino Russo FLUMEN Research Group Technical University of Catalonia, Jordi Girona 1-3,
More informationSolaris 10 Documentation README
Solaris 10 Documentation README Sun Microsystems, Inc. 4150 Network Circle Santa Clara, CA 95054 U.S.A. Part No: 817 0550 10 January 2005 Copyright 2005 Sun Microsystems, Inc. 4150 Network Circle, Santa
More informationRAPPORT FINANCIER ANNUEL PORTANT SUR LES COMPTES 2014
RAPPORT FINANCIER ANNUEL PORTANT SUR LES COMPTES 2014 En application de la loi du Luxembourg du 11 janvier 2008 relative aux obligations de transparence sur les émetteurs de valeurs mobilières. CREDIT
More informationExtracting Business. Value From CAD. Model Data. Transformation. Sreeram Bhaskara The Boeing Company. Sridhar Natarajan Tata Consultancy Services Ltd.
Extracting Business Value From CAD Model Data Transformation Sreeram Bhaskara The Boeing Company Sridhar Natarajan Tata Consultancy Services Ltd. GPDIS_2014.ppt 1 Contents Data in CAD Models Data Structures
More information16. Product Design and CAD/CAM
16. Product Design and CAD/CAM 16.1 Unit Introduction 16.2 Unit Objectives 16.3 Product Design and CAD 16.4 CAD System Hardware 16.5 CAM, CAD/CAM, and CIM 16.6 Unit Review 16.7 Self Assessment Questions
More informationCB Test Certificates
IECEE OD-2037-Ed.1.5 OPERATIONAL & RULING DOCUMENTS CB Test Certificates OD-2037-Ed.1.5 IECEE 2011 - Copyright 2011-09-30 all rights reserved Except for IECEE members and mandated persons, no part of this
More informationN1 Grid Service Provisioning System 5.0 User s Guide for the Linux Plug-In
N1 Grid Service Provisioning System 5.0 User s Guide for the Linux Plug-In Sun Microsystems, Inc. 4150 Network Circle Santa Clara, CA 95054 U.S.A. Part No: 819 0735 December 2004 Copyright 2004 Sun Microsystems,
More informationREV G D6-51991 Boeing Partner Network REFERENCE ONLY Copy 1 of 15
REV G D6-51991 Boeing Partner Network REFERENCE ONLY Copy 1 of 15 TABLE OF CONTENTS Section Page Table of Contents 2 Abstract 3 Maintenance 3 References 3 Purpose 4 Scope 4 Definitions 4 1.0 Digital Product
More informationSun Enterprise Optional Power Sequencer Installation Guide
Sun Enterprise Optional Power Sequencer Installation Guide For the Sun Enterprise 6500/5500 System Cabinet and the Sun Enterprise 68-inch Expansion Cabinet Sun Microsystems, Inc. 901 San Antonio Road Palo
More informationOffice of the Auditor General / Bureau du vérificateur général FOLLOW-UP TO THE 2010 AUDIT OF COMPRESSED WORK WEEK AGREEMENTS 2012 SUIVI DE LA
Office of the Auditor General / Bureau du vérificateur général FOLLOW-UP TO THE 2010 AUDIT OF COMPRESSED WORK WEEK AGREEMENTS 2012 SUIVI DE LA VÉRIFICATION DES ENTENTES DE SEMAINE DE TRAVAIL COMPRIMÉE
More informationDesign. Design. Certificates. Contact Information. Full-Time Faculty. Associate Degrees. Associate in Arts Degrees. Certificate of Achievement
Design Associate in Arts Degrees Architectural Design Computer-Aided Drafting Computer-Aided Drafting and Design Mechanical Design Students may earn one of the above-named associate degrees by completing
More informationOptimizing Solaris Resources Through Load Balancing
Optimizing Solaris Resources Through Load Balancing By Tom Bialaski - Enterprise Engineering Sun BluePrints Online - June 1999 http://www.sun.com/blueprints Sun Microsystems, Inc. 901 San Antonio Road
More informationSwitching Power Supply XP POWER INC. SUITE 150, 1241 E DYER RD SANTA ANA CA 92705, USA XP POWER INC SUITE 150, 1241 E DYER RD SANTA ANA CA 92705, USA
IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI D'ACCEPTATION MUTUELLE DE CERTIFICATS D'ESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE
More informationSpringer SUPPLY CHAIN CONFIGURATION CONCEPTS, SOLUTIONS, AND APPLICATIONS. Cham Chandra University of Michigan - Dearborn Dearborn, Michigan, USA
SUPPLY CHAIN CONFIGURATION CONCEPTS, SOLUTIONS, AND APPLICATIONS Cham Chandra University of Michigan - Dearborn Dearborn, Michigan, USA Jänis Grabis Riga Technical University Riga, Latvia Springer Contents
More informationHow To Improve Your Design
Concevoir par l optimisation numérique Application à la fabrication additive Jean-Pierre ROUX Innovation Intelligence Altair Engineering France jproux@altair.com 1 About Us We help businesses succeed through
More informationCreating 2D Drawings from 3D AutoCAD Models
Creating 2D Drawings from 3D AutoCAD Models David Piggott CrWare, LP GD205-2P This class explores the various techniques in creating 2D part and assembly drawings from 3D AutoCAD models. As part of the
More informationMillier Dickinson Blais
Research Report Millier Dickinson Blais 2007-2008 National Survey of the Profession September 14, 2008 Contents 1 Introduction & Methodology... 3 2 National Results... 5 3 Regional Results... 6 3.1 British
More informationImplementation of STEP-TAS Thermal Model Exchange Standard in Thermal Desktop
Implementation of STEP-TAS Thermal Model Exchange Standard in Thermal Desktop Tim Panczak Georg Siebes C&R NASA/JPL 303.971.0292 Fax 303.971.0035 Outline Background of STEP-TAS Phase I SBIR Results Future
More informationInternational standards on technical. documentation. documentation. International Electrotechnical Commission
International standards on technical documentation documentation International Electrotechnical Commission The whole life cycle of a product, system or installation needs documentation. International standards
More informationFeature Comparison of PTC Creo View MCAD. Product Suite. Topic Sheet. Page 1 of 6 Feature Comparison of PTC Creo View MCAD Product Suite
Comparison of Product Suite User Interface Lite Microsoft Fluent paradigm Ribbon User Interface User interface customization Command finder Usage Standalone version Interoperability with PTC Products Performance
More informationProSTEP ivip/vda JT Translator Benchmark
ProSTEP ivip/vda JT Translator Benchmark JT TRANSLATOR BENCHMARK SHORT REPORT Edition 1 JT Translatoren Benchmark SHORT REPORT CONTENTS Contents 1 Introduction 4 2 ProSTEP ivip/vda JT Translator Benchmark
More informationwww.enac.fr www.enac.fr
ICAO LPR Workshop Paris 8-10 December 2010 Michael O Donoghue John Kennedy 9835_2010 Foreward References throughout the document are to language proficiency requirements in general regardless of the specific
More informationNX for Tooling and Fixture Design Transforming today s processes for designing and manufacturing injection molds, dies and fixtures
for Tooling and Fixture Design Transforming today s processes for designing and manufacturing injection molds, dies and fixtures fact sheet Siemens PLM Software www.siemens.com/nx Summary The software
More informationTravaux publics et Services gouvernementaux Canada. Title - Sujet Furniture for Work Spaces. Solicitation No. - N de l'invitation E60PQ-140003
Public Works and Government Services Canada RETURN BIDS TO: RETOURNER LES SOUMISSIONS À: Bid Receiving - PWGSC / Réception des soumissions - TPSGC 11 Laurier St./11, rue Laurier Place du Portage, Phase
More informationHow To Create A Cdf Optimisation System
ADVANCED ENGINEERING 4(2010)2, ISSN 1846-5900 INTERFACES FOR EMBEDDING CFD OPTIMISATION WORKFLOWS INTO THE PRODUCT DEVELOPMENT PROCESS Todorov, G.; Ovcharova, J.; Romanov, B. & Kamberov, K. Abstract: The
More informationOptical Digitizing by ATOS for Press Parts and Tools
Optical Digitizing by ATOS for Press Parts and Tools Konstantin Galanulis, Carsten Reich, Jan Thesing, Detlef Winter GOM Gesellschaft für Optische Messtechnik mbh, Mittelweg 7, 38106 Braunschweig, Germany
More informationCERTIFICATE OF COMPLIANCE
CERTIFICATE OF COMPLIANCE Certificate Number 20131115-E240353 Report Reference E240353-A17-UL Issue Date 2013-NOVEMBER-15 Issued to: HGST, A WESTERN DIGITAL COMPANY 5601 GREAT OAKS PKY SAN JOSE CA 95119
More informationComputer Graphics. Geometric Modeling. Page 1. Copyright Gotsman, Elber, Barequet, Karni, Sheffer Computer Science - Technion. An Example.
An Example 2 3 4 Outline Objective: Develop methods and algorithms to mathematically model shape of real world objects Categories: Wire-Frame Representation Object is represented as as a set of points
More informationLong Term Archiving and Retrieval. of Product Data within the Aerospace Industry (LOTAR)
White Paper for Long Term Archiving and Retrieval of Product Data within the Aerospace Industry (LOTAR) Technical Aspects of an approach for application of Project Group LOTAR : Version: 1.0 Status: Author:
More informationVMware. Stephane CROIX Systems Engineer Manager scroix@vmware.com. 2009 VMware Inc. All rights reserved
VMware Stephane CROIX Systems Engineer Manager scroix@vmware.com 2009 VMware Inc. All rights reserved 2 A Deep and Committed Partnership Le service informatique est généralement contraint de se concentrer
More informationAML710 CAD LECTURE 1. Introduction to CAD. Motivation Principles of CAD / CAM. AML710 Computer Aided Design
AML710 CAD LECTURE 1 Introduction to CAD Motivation Principles of CAD / CAM AML710 Computer Aided Design L-T-P 3-0-2 : 4 Credits Prerequisites and background Course Coordinator Course Webpage http://web.iitd.ac.in/~hegde/cad
More informationMaharaja Sawai Man Singh Vidyalaya, Jaipur
Maharaja Sawai Man Singh Vidyalaya, Jaipur HOLIDAY ASSIGNMENT Class X ENGLISH Read The Dear Departed Jot down the character traits of Mr. & Mrs Slater, Mr. & Mrs. Jordan, Abel and Victoria in your English
More informationUsing SolidWorks Enterprise PDM For ECO Management... 1
Using SolidWorks Enterprise PDM For ECO Management The SolidWorks Enterprise PDM application is one of the most useful tools for Engineering content management based upon the user experience, the flexibility,
More informationCOMMISSION INTERNATIONALE DE KARTING - FIA
FICHE D HOMOLOGATION HOMOLOGATION FORM Homologation N 3/P/ COMMISSION INTERNATIONALE DE KARTING - FIA PNEUMATIQUE / TYRE Manufacturier Tyre Manufacturer Reifenwerk Heidenau GmbH Marque Make MOJO Modèle
More informationA Document Visualization Tool Customized to Explore DRDC Reports. Peter Kwantes
A Document Visualization Tool Customized to Explore DRDC Reports Peter Kwantes Defence R&D Canada Technical Memorandum DRDC Toronto TM 2011-131 August 2011 A Document Visualization Tool Customized to
More informationAn Integration Framework for
An Integration Framework for Product Lifecycle Management Vijay Srinivasan PLM Chief Standards & Solutions Officer IBM Software Group IBM and Columbia University AP Personal lperspective Add Product Lifecycle
More informationScience Intensive Development (SID)
Science Intensive Development (SID) At, we develop custom software that requires specific scientific knowledge. We are experienced in realizing projects that had been considered impossible. The main guarantee
More informationA TOOL FOR SUPPORTING THE PROCESS OF PROPERTY MANAGEMENT AND THE CREATION OF TECHNICAL DRAWINGS
Nenad Bojčetić Dragan Žeželj Mario Štorga ISSN 1333-1124 A TOOL FOR SUPPORTING THE PROCESS OF PROPERTY MANAGEMENT AND THE CREATION OF TECHNICAL DRAWINGS Summary UDK 744:004.4 CAD applications play a major
More informationUpgrading the Solaris PC NetLink Software
Upgrading the Solaris PC NetLink Software By Don DeVitt - Enterprise Engineering Sun BluePrints OnLine - January 2000 http://www.sun.com/blueprints Sun Microsystems, Inc. 901 San Antonio Road Palo Alto,
More informationSun Cluster 2.2 7/00 Data Services Update: Apache Web Server
Sun Cluster 2.2 7/00 Data Services Update: Apache Web Server Sun Microsystems, Inc. 901 San Antonio Road Palo Alto, CA 94303-4900 U.S.A. 650-960-1300 Part No. 806-6121 July 2000, Revision A Copyright 2000
More informationPRODUCT BROCHURE SPATIAL ANALYZER. Powerful, traceable and easy-to-use metrology and analysis software
PRODUCT BROCHURE SPATIAL ANALYZER Powerful, traceable and easy-to-use metrology and analysis software SPATIAL ANALYZER SpatialAnalyzer (SA) is a powerful, traceable and easy to use metrology and analysis
More informationIntroduction. GEAL Bibliothèque Java pour écrire des algorithmes évolutionnaires. Objectifs. Simplicité Evolution et coévolution Parallélisme
GEAL 1.2 Generic Evolutionary Algorithm Library http://dpt-info.u-strasbg.fr/~blansche/fr/geal.html 1 /38 Introduction GEAL Bibliothèque Java pour écrire des algorithmes évolutionnaires Objectifs Généricité
More information