8 overhead Technical Datasheet Pack

Transcription

1 8 overhead Technical Datasheet Pack Issue No: 7 Issue Date: 26/01/2012

2 Contents Click on the links below to access the required technical datasheet. Click on the Uniline logo to return to this page. Old Part Number New Part Number Datasheet Number Contents Typical Uni-8 Overhead System mm Hex Swage Tensioner - 5kN U8T mm Hex Swage Toggle U8S mm Hex Swage Joiner U8S Uni-8 Overhead racket U mm 1x19 SS Cable Per M U Uni-8 Overhead Traveller UG UniEye UE Wall Fixing Plate UP Uni-8 Energy bsorber U Cable ID Tag Issue Date: 26/01/12 Page 2 of 14 Issue No: 7

3 Installation Date / Installatiedatum / Fecha de instalación / Montagedatum / Date d'installation / Data da instalação / Data installazione / Installationsdatum Installed y / Geïnstalleerd door / Instalado Por / Montiert durch / Installateur / Instalado por / Installato da / Installerad av Contact Number / Contactnr. / Tel. de contacto / Kontakttelefon / Téléphone / Nº de Contacto / Numero contatto / Kontaktnummer Min Ground Clearance (m) / Min. vrije valruimte (m) / Distancia minima hasta el suelo (m) / Mindestabstand zum oden (m) / Hauteur libre minimale (m) / ltura mínima livre (mt) / Distanza libera minima da terra (m) / Min. höjd ovanför marken cable Max Users Per Span / Max. aantal gebruikers per overspanning / Máximo de usuarios por vano / Höchstzahl der enutzer pro Spannweite / Nombre maximal d utilisateurs par portée / Nº máximo de utilizadores por vão / N. utenti max. per sezione / Max. användare per skena Max Users Per System / Max. aantal gebruikers per systeem / Máximo de usuarios por sistema / Maximale enutzer pro System / Nombre maximal d utilisateurs par système / Nº máximo de utilizadores por linha / N. utenti max. per sistema / Max. användare per system horizontal systems Next Service Date / Datum volgende keuring / Próxima fecha de revisión / Not applicable to Rail Systems Termin der nächsten Wartung / Prochaine date d entretien / Data da próxima Inspecção / Data prossima manutenzione / Nästa servicedatum EN795:1996 Class C OSH COMPLINT System Serial No / Serienummer / Número de serie del sistema / Seriennummer des Systems / S/NZS Numéro de série / Nº de série do sistema / N. di serie sistema / Systemets serienr. Use Energy bsorbing Lanyards / Gebruik energie-absorberende verbindingslijnen / Utilice acolladores de absorción de energía / Verwenden Sie falldämpfende Sicherheits-/nschlagseile / Utilisez des longes à absorption d énergie / Usar cordas com amortecedor de energia / Utilizzare funi ad assorbimento d energia / nvänd energiupptagande taljerep Technical Datasheet No: 1134 Typical Uni-8 Overhead System MX 30m (100ft) F H C D E G I Wall Fixing Plate ( ) UniEye ( ) C Uni-8 Energy bsorber ( ) D 8mm Hex Swage Tens-5kN ( ) E Uni-8 Overhead racket ( ) F Uni-8 Overhead Traveller ( ) G 8mm 1x19 SS Cable ( ) H 8mm Hex Swage Toggle ( ) I Cable ID Tag ( ) Fasteners for fixing to the structure are not supplied. For more detailed component information refer to the individual datasheets. System Specification Stainless Steel Components Throughout Natural/Electropolished Conformity EN 795 Class C, OSH Compliant, NSI Z359.1, S/NZS Issue Date: 26/01/12 Page 3 of 14 Issue No: 7

4 Technical Datasheet No: mm Hex Swage Tensioner - 5kN Part No: C D F E Clevis Pin Cotter Pin C Tension Indicator Disc D Tension djuster G E F G Tension djuster Lock Nut Hex Swage Stud 8mm 1x19 or 7x7 Stainless Steel Cable* *Order Separately. The tensioner unit is attached to the anchor point using the clevis pin and cotter pin. It is used to set the tension of the cable in horizontal applications. Refer to installation instructions for information on assembly and installation. For use with 8mm 1x19 or 7x7 wire only. 19kN max permitted cable tension, min break strength 38kN. Natural 0.85kg (1.87lbs) Issue Date: 26/01/12 Page 4 of 14 Issue No: 7

5 Technical Datasheet No: mm Hex Swage Toggle Part No: mm (1.10 ) 30mm (1.18 ) 18mm (0.71 ) Ø12.7mm (0.5 ) 79mm (3.11 ) 179mm (7.05 ) 82mm (3.23 ) Ø12.5mm (0.63 ) efore Swagging Used to hold the cable fi rmly in place at one end of the system. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation.19kn max permitted arrest load, min break strength 38kN. Natural 0.33kg (0.73lbs) Issue Date: 26/01/12 Page 5 of 14 Issue No: 7

6 Technical Datasheet No: mm Hex Swage Joiner Part No: mm (3.28 ) 190mm (7.48 ) before swaging 200mm (7.87 ) after swaging 8mm 1x19 or 7x7 Stainless Steel Cable* 8mm Hex Swage Joiner *Order Separately. Used to join two sections of cable together. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation. 19kN max permitted cable tension, min break strength 38kN. Natural 0.12kg (0.26lbs) Issue Date: 26/01/12 Page 6 of 14 Issue No: 7

7 Technical Datasheet No: 0923 Uni-8 Overhead racket Part No: mm (2.76 ) Ø9mm (0.35 ) Ø12mm (0.47 ) Ø12.5mm (0.49 ) 80mm (3.15 ) 76mm (2.99 ) 285mm (11.22 ) For use as an intermediate bracket in Uni8 Overhead systems. Electropolished 0.37kg (0.82lbs) Issue Date: 26/01/12 Page 7 of 14 Issue No: 7

8 Technical Datasheet No: mm 1x19 SS Cable Per M Part No: Ø8mm For use on vertical and Uni-8 Overhead systems. Minimum breaking strength 45.5kN ( lbf). Natural 0.32kg/m (0.2lbs/ft) Issue Date: 26/01/12 Page 8 of 14 Issue No: 7

9 Technical Datasheet No: 0919 Uni-8 Overhead Traveller Part No: mm (1.34 ) C 114mm (4.49 ) 70mm (2.76 ) 119.5mm (4.70 ) Ø18mm (0.71 ) ody Wheels C Rivets For use as a non-removable traveller in Uni-8 Overhead systems. Connector not included. Minimum breaking strength 22.2kN (5000 lbf). Casting Wheels Rivets 17-4 Stainless Steel 17-4 Stainless Steel Electropolished Machined Machined 0.71kg (1.57lbs) Issue Date: 26/01/12 Page 9 of 14 Issue No: 7

10 Technical Datasheet No: 0837 UniEye Part No: mm (1.34 ) Ø75mm (2.95 ) C 8mm (0.31 ) 99mm (3.90 ) The UniEye is designed as a multipurpose single point anchor and end anchor for Uniline horizontal systems. Ultimate load in direction - 96kN (21582lbf). Ultimate load in direction - 67kN (15062lbf). DO NOT LOD IN DIRECTION C Electropolished 0.57kg (1.26lbs) Issue Date: 26/01/12 Page 10 of 14 Issue No: 7

11 Technical Datasheet No: 0840 Wall Fixing Plate Part No: mm (9.84 ) 75mm (2.95 ) 12mm (0.47 ) 42mm (1.65 ) Ø13mm (0.51 ) Ø16mm (0.63 ) Used in conduction with UniEye or other anchor point to spread the load back to the structure. Minimum breaking strength 41.65kN ( lbf). Electropolished 1.84kg (4.1lbs) Issue Date: 26/01/12 Page 11 of 14 Issue No: 7

12 Technical Datasheet No: 0866 Uni-8 Energy bsorber Part No: Ø13mm (0.51 ) 240.8mm (9.48 ) Ø12mm (0.47 ) 4mm (0.16 ) Ø63.5mm (2.5 ) For use in Uni-8, Uni-8 Overhead and Uni-16 systems to reduce loads generated in a fall arrest situations. Reduced maximum fall arrest load by up to 4.5kN (minimum system load will not fall below 7.5kN). When calculating the minimum ground clearance for systems using Uni-8 Energy absorbers, be sure to add 300mm per energy absorber used. Max pretension in system 5kN. Natural 1.19kg (2.6lbs) Issue Date: 26/01/12 Page 12 of 14 Issue No: 7

13 Technical Datasheet No: 1096 Cable ID Tag Part No: mm (7.87 ) Installation Date / Installatiedatum / Fecha de instalación / Montagedatum / Date d'installation / Data da instalação / Data installazione / Installationsdatum Installed y / Geïnstalleerd door / Instalado Por / Montiert durch / Installateur / Instalado por / Installato da / Installerad av 55mm (2.17 ) horizontal Not applicable to Rail Systems cable systems EN795:1996 Class C OSH COMPLINT S/NZS Contact Number / Contactnr. / Tel. de contacto / Kontakttelefon / Téléphone / Nº de Contacto / Numero contatto / Kontaktnummer Min Ground Clearance (m) / Min. vrije valruimte (m) / Distancia minima hasta el suelo (m) / Mindestabstand zum oden (m) / Hauteur libre minimale (m) / ltura mínima livre (mt) / Distanza libera minima da terra (m) / Min. höjd ovanför marken Max Users Per Span / Max. aantal gebruikers per overspanning / Máximo de usuarios por vano / Höchstzahl der enutzer pro Spannweite / Nombre maximal d utilisateurs par portée / Nº máximo de utilizadores por vão / N. utenti max. per sezione / Max. användare per skena Max Users Per System / Max. aantal gebruikers per systeem / Máximo de usuarios por sistema / Maximale enutzer pro System / Nombre maximal d utilisateurs par système / Nº máximo de utilizadores por linha / N. utenti max. per sistema / Max. användare per system Next Service Date / Datum volgende keuring / Próxima fecha de revisión / Termin der nächsten Wartung / Prochaine date d entretien / Data da próxima Inspecção / Data prossima manutenzione / Nästa servicedatum System Serial No / Serienummer / Número de serie del sistema / Seriennummer des Systems / Numéro de série / Nº de série do sistema / N. di serie sistema / Systemets serienr. Use Energy bsorbing Lanyards / Gebruik energie-absorberende verbindingslijnen / Utilice acolladores de absorción de energía / Verwenden Sie falldämpfende Sicherheits-/nschlagseile / Utilisez des longes à absorption d énergie / Usar cordas com amortecedor de energia / Utilizzare funi ad assorbimento d energia / nvänd energiupptagande taljerep For use on all cable systems (Languages: English, Spanish, Dutch, German, French, Portuguese, Italian and Swedish). Must be attached in a visible location near the start of the system. It is completed by the installer with essential information for the user. luminium 5005 nodised. Screen printed & low temperature baked. 9g (0.32oz) Issue Date: 26/01/12 Page 13 of 14 Issue No: 7

14 Capital Safety Group, through our Uniline brand is the global market leader in the design and manufacture of engineered fall protection systems. Through a combination of expert knowledge and practical experience, we can help our customers reduce risk and increase safety when working at height. Our comprehensive Uniline range of products offers fully compliant, practical solutions for structures of all types, in all industries. Our ethos of delivering quality, service, training and support for our customers has earned Uniline a deserved reputation for excellence around the world. Operating through specialist safety companies globally, Uniline provides local support and installation services to meet the specifi c safety objectives of all our customers. If you need a safety solution for roof access during maintenance and inspection tasks, then look no further than Uniline s Roofi ng product range. Our products, including roof anchors, horizontal lifelines & horizontal rail systems offer comprehensive protection for workers on all types of roofs. The products in our Horizontal systems range are some of the best know brands in fall protection safety. The versatility of these products combined with Uniline s expertise in fall protection ensures we can solve even the most complex of height safety problems in industry, construction, façade access and for all manner of building maintenance and inspection tasks. The best vertical fall protection systems in the world won t let you down. The extensive development of this range of products for vertical structures including masts, towers, pylons, wind turbines, silos, bridges and chimney stacks ensures customers will enjoy the safest and most functional climbing experience possible. unique range of custom access products for challenging fall protection situations in transport and industry. These solutions are structurally analysed and designed to our customers exact needs and specifi cations. local distributor/systems integrator Worldwide Locations UK 5a Merse Road North Moons Moat Redditch, Worcestershire 98 9HL UK t: +44 (0) f: +44 (0) EUROPE, MIDDLE EST & FRIC Le roc Center Z.I. 1re venue P Carros Le roc Cedex FRNCE t: +33 (0) f: +33 (0) US 3833 SL Way Red Wing MN US freephone: t: +1 (651) f: +1 (651) CND 260 Export oulevard Mississauga Ontario L5S 1Y9 CND freephone: t: +1 (905) f: USTRLI & NEW ZELND 95 Derby Street Silverwater NSW 2128 USTRLI freephone: (US) freephone: (NZ) t: f: SI No 6 Tuas venue SINGPORE t: +(65) f: +(65)