Visit to access valuable information concerning John Wood products and services such as:

Transcription

1 Residential and Commercial Electric gas oil tankless

2 Visit online! Visit to access valuable information concerning John Wood products and services such as: Parts Catalogue Warranty Validation ENERGY STAR qualified products and rebate programs Information on products, including specifications and installation manuals Literature Request Form Frequently Asked Questions (FAQs) Exclusive Members Only Area Communication Request sign up to receive notifications regarding Technical Bulletins, New Products / Product News, Warranty Information and Environmental Initiatives

3 Table of Contents John Wood Water Heaters 1 RESIDENTIAL PRODUCTS John Wood Safety Systems 3 Atmospheric Vent (ENERGY STAR Qualified) 4 Atmospheric Vent (Standard) 6 Power Vent (ENERGY STAR Qualified) 8 Power Direct Vent 10 Direct Vent 12 Envirosense Power Direct Vent 14 Envirosense Power Vent 16 Polaris 18 Residential Electric 20 SpaceSaver 22 Oil Fired & Oil Burners 24 Storage Booster Tanks 26 FlowTHRU 28 Range Boiler 30 TANKLESS PRODUCTS John Wood powered by Takagi Tankless 32

4 Table of Contents COMMERCIAL PRODUCTS John Wood Commercial Water Heaters 37 Commercial High Efficient Gas 38 Commercial Atmospheric Gas 40 Commercial Electric 42 Commercial Oil-Fired 44 Commercial Storage Tanks 46 Light Duty Commercial Gas 48 Polaris Commercial 50 APPENDICES Cross-Over Matrix 53 Sizing Guide 54 Ohm s Law 56 Reference Guide for Water Heating 57 Exclusive Designs, Service & Support 63 John Wood does not represent and/or warrant in any manner the information and suggestions contained in this brochure. John Wood maintains a policy of ongoing product improvement. This may result in modification of features and/or specifications without notice.

5 John Wood Water Heaters When you buy a John Wood water heater, you buy a quality, dependable product. John Wood support is based on First Call, Final Resolution service. Our Care Technicians are driven to provide expert guidance, to identify the issue quickly and assist you until you re satisfied. Support is available 24/7 with online resources, such as the Online Parts Catalogue, Warranty Validation, Product Information and Media Centre to help promote your business. 1

6 DON T WASTE YOUR ENERGY WITH ANY OTHER POWER VENT John Wood, the leader in efficiency*, now has the most complete line-up of Power Vent water heaters in their class and exceed ENERGY STAR qualifications with an amazing 0.70 EF. Learn more on Pages 8 and 9 in this catalogue. * Based on current competitor branded Power Vent water heaters available for sale with Energy Factors between

7 Residential

8

9 John Wood Safety Systems Flammable Vapour Ignition Resistant (FVIR) technology you can trust. John Wood residential water heaters use one of three unique Flammable Vapour Ignition Resistant (FVIR) Safety Systems that reduce the risk of accidental fires caused by the ignition of flammable vapours from products such as gasoline, paint thinner and solvents: the Flame Guard and Flame Safe TM Safety Systems and the Power Vent Safety System. Flame Guard Safety System Used on John Wood Atmospheric Vent Water Heaters The Flame Guard Safety System is a recognized and proven technology used on John Wood Atmospheric Vent Water Heaters. The award winning Flame Guard Safety System protects the consumer by trapping burning vapours within the water heater combustion chamber through the patented Flame-Trap. As long as the vapours are present and within the flammability range, they will continue to burn safely until they burn themselves out. Flame Safe TM Safety System Used on John Wood Direct Vent Water Heaters Flame Safe TM technology - designed to protect the consumer against the ignition of flammable vapours. Power Vent Safety System The Safety System used on John Wood Power Vent water heaters features a Flammable Vapour Sensor and air intake snorkel. This system not only shuts down the unit when flammable vapours are detected in the area of the water heater but elevates the air intake so that flammable vapours do not enter the combustion chamber and ignite before the sensor shuts down the water heater. 3

10 Atmospheric Vent ENERGY STAR Qualified Features Flue damper for increased energy efficiency and performance 24 Volt Gas Valve offers: Diagnostic capabilities, monitors damper to ensure proper operation and safety, spark ignition eliminates the need for a standing pilot Robust 1/4 pilot tubing Durable brass drain valve Turbulator TM dip tube reduces sediment build-up at bottom of the tank Glass-lined tank to prolong tank life and prevent corrosion Plugs into a standard 110/120v outlet (10 ft. power cord included) Combustion chamber is easy to access Conveniently located T&P and drain valve for ease of installation and serviceability Top mounted heavy duty anode rod for added tank protection PERFORMANCE Model Capacity Maximum Certified Altitude Input Recovery First Hour Rate at 90 F Rating Energy BC Temp. Rise Factor Compliant USG (L) ft (m) BTU/h GPH (LPH) USG (L) NATURAL GAS JW840S40N-AV-ES2** 40 (151) 10,100 (3,077) 40, (159) 67 (254) 0.67 a JW840T40N-AV-ES2 40 (151) 10,100 (3,077) 40, (159) 67 (254) 0.67 a JW850S40N-AV-ES2** 50 (189) 10,100 (3,077) 40, (159) 81 (307) 0.67 a JW850T40N-AV-ES2 50 (189) 10,100 (3,077) 40, (159) 81 (307) 0.67 a For Propane replace N with P Water connections - 3/4 on all models * Propane (LP) gas - 36,000 BTU input for 40USG (151 Litre) models; 37,000 BTU for 50 USG (189 litre) models. **Not available for propane 4 Atmospheric Vent - ENERGY STAR Qualified

11 HOT DIMENSIONS & SHIPPING WEIGHT Approximate Shipping Weight Drafthood Connector Diameter Height to T&P Distance Centre Inlet to Centre Outlet Height to Gas Inlet Tank Diameter Height to Top of Tank Installation Height Model lb (kg) in F ANODE ROD* CONNECTION COLD CONNECTION E C T&P VALVE 1/2" GAS CONNECTION F B A D * Location for optional top-mounted T&P Valve if ordered from factory. Maximum Hydrostatic Working Pressure: 150 PSI. E D C B A JW840S40N-AV-ES2 54 (137) 47 3/4 (121) 22 (56) 13 (33) 8 (20) 41 (104) 3 or (69) JW840T40N-AV-ES2 64 1/4 (163) 58 1/4 (148) 20 (51) 13 (33) 8 (20) 51 3/4 (131) 3 or (69) JW850S40N-AV-ES2 55 3/4 (142) 49 1/2 (126) 24 (61) 13 (33) 8 (20) 42 1/2 (108) 3 or (83) JW850T40N-AV-ES2 63 1/2 (161) 57 1/4 (145) 22 (56) 13 (33) 8 (20) 50 1/4 (128) 3 or (76) For Propane replace N with P Atmospheric Vent - ENERGY STAR Qualified 5

12 Atmospheric Vent Proven Technology. Exceptional Reliability. Features Turbulator TM dip tube reduces sediment build-up at the bottom of the tank Thermopile design provides robust pilot to withstand down drafts and environmental conditions Gas valve offers easy temperature adjustments and has LED indicator light for operation, diagnostic and troubleshooting assistance Robust 1/4 pilot tubing The FlameGuard Safety System protects the homeowner by trapping burning vapours within the water heater s combustion chamber Combustion chamber is easy to access Conveniently located T&P and drain valve for ease of installation and serviceability Piezoelectric ignitor allows for lighting of the pilot without matches Top mounted heavy duty anode rod for added tank protection Available for Natural Gas or Propane 6 PERFORMANCE Model Capacity Maximum Certified Altitude Input USG (L) ft (m) BTU/h Recovery First Hour Rate at 90 F Rating Temp. Rise Energy Factor GPH (LPH) USG (L) BC Compliant NATURAL GAS JW830S35N-AV1 30 (114) 10,100 35,500 (3,077) 36 (136) 60 (227) 0.61 JW840S40N-AV1 40 (151) 10,100 40,000 (3,077) 41 (155) 66 (250) 0.59 JW840S40N-AV 10, (151) (3,077) 40, (155) 67 (254) 0.62 a JW840T40N-AV 10, (151) (3,077) 40, (155) 70 (265) 0.62 a JW850S40N-AV1 50 (189) 10,100 40,000 (3,077) 41 (155) 93 (352) 0.58 JW850S40N-AV 10, (189) (3,077) 40, (155) 93 (352) 0.61 a JW850T40N-AV 10, (189) (3,077) 40, (155) 88 (333) 0.62 a JW860T52N-AV1 60 (227) 10,100 52,200 (3,077) 53 (201) 104 (344) 0.56 JW860T52N-AV 10, (227) (3,077) 52, (201) 104 (344) 0.58 a JW875T75N-AV 10, (284) (3,077) 75, (307) N/A N/A a 10,100 JW875T75N-AVL* 75 (284) (3,077) 75, (307) N/A N/A a For Propane replace N with P * Model has side connections Atmospheric Vent - Standard

13 DIMENSIONS & SHIPPING WEIGHT Model Installation Height A Height to Top of Tank B Tank Diameter C Height to Gas Inlet D Distance Centre Inlet to Centre Outlet E Height to T&P F Drafthood Connector Diameter Approximate Shipping Weight in lb (kg) JW830S35N-AV1 50 (127) 46 3/8 (118) 18 (46) 13 1/2 (34) 8 (20) 40 (102) 3 or (51) JW840S40N-AV1 51 1/2 (131) 47 3/4 (121) 20 (51) 13 (33) 8 (20) 41 (104) 3 or (61) JW840S40N-AV 51 1/2 (131) 47 3/4 (121) 22 (56) 13 (33) 8 (20) 41 (104) 3 or (63) JW840T40N-AV 61 3/4 (157) 58 1/4 (148) 20 (51) 13 (33) 8 (20) 51 3/4 (131) 3 or (66) JW850S40N-AV1 53 1/4 (135) 49 1/2 (126) 22 (56) 13 (33) 8 (20) 42 1/2 (108) 3 or (74) JW850S40N-AV 53 1/4 (135) 49 1/2 (126) 24 (61) 13 (33) 8 (20) 42 1/2 (108) 3 or (79) JW850T40N-AV 61 (155) 57 1/4 (145) 22 (56) 13 (33) 8 (20) 50 1/4 (128) (72) JW860T52N-AV1 62 3/4 (159) 59 (150) 22 (56) 13 (33) 8 (20) 511/2 (131) (87) JW860T52N-AV 62 3/4 (159) 59 (150) 24 (61) 13 (33) 8 (20) 511/2 (131) (93) JW875T75N-AV 61 (155) 57 (145) 26 1/2 (67) 14 3/4 (38) 8 (20) 50 1/4 (136) (124) JW875T75N-AVL 61 (155) 57 (145) 26 1/2 (67) 14 3/4 (38) 8 (20) 50 1/4 (136) (124) For Propane replace N with P Atmospheric Vent 7

14 Power Vent ENERGY STAR Qualified Features Industry-leading energy efficient power vent, with a 0.70 EF* (*0.68 EF on 75 USG model) ENERGY STAR qualified, including the only 75 USG available in the market State-of-the-art electronic gas control features self-diagnostic capability that makes troubleshooting easy Ideal as a replacement water heater in a variety of applications due to the rotatable blower All units can be vented horizontally through the wall or vertically through the roof with plastic venting pipe certified for gas fired appliances Convenient 3/4 side taps for combination applications on 50 USG high-input and 75 USG models PERFORMANCE Model Capacity Maximum Certified Altitude Input BTU/h Recovery Rate First Hour at 100 F/55 C Rating Temp. Rise Energy Factor USG (L) ft (m) GPH (LPH) USG (L) NATURAL GAS JW840S40N-PV-ES2 40 (151) 10,100 (3,077) 40, (151) 73 (276) 0.70 JW840T50N-PV-ES2 40 (151) 10,100 (3,077) 50, (188) 90 (341) 0.70 JW850S40N-PV-ES2 50 (189) 10,100 (3,077) 40, (151) 90 (341) 0.70 JW850T50N-PV-ES2 50 (189) 10,100 (3,077) 50, (188) 96 (363) 0.70 JW850S62N-PV-ES2* 50 (189) 10,100 (3,077) 62, (233) 110 (416) 0.70 JW860S42N-PV-ES2 60 (227) 10,100 (3,077) 42, (159) 106 (401) 0.70 JW875T72N-PV-ES2* 75 (284) 10,100 (3,077) 72, (264) 155 (587) 0.68 For Propane replace N with P. * Model has side connections aall models are BC Compliant. 8 Power Vent - ENERGY STAR QuaIified

15 DIMENSIONS & SHIPPING WEIGHT Model Installation Height Height to Top of Tank Tank Diameter Overall Depth Height to Drain Valve Height to Gas Inlet Height to T&P and Upper Side Connection (where applicable) Height to Lower Side Connection (where applicable) Approx. Shipping Weight NATURAL GAS A B C D JW840S40N-PV-ES2 59 (150) 49 5/8 (126) 22 (56) 29 1/8 (74) 11 (28) 14 1/4 (36) 42 1/2 (108) n/a 174 (79) JW840T50N-PV-ES2 68 1/2 (174) 59 1/4 (150) 20 (51) 27 1/8 (69) 11 (28) 14 1/4 (36) 53 1/8 (135) 15 1/4 (39) 176 (80) JW850S40N-PV-ES2 60 1/8 (153) 50 3/4 (129) 24 (61) 31 1/8 (79) 11 (28) 14 1/4 (36) 43 3/4 (111) n/a 198 (90) JW850T50N-PV-ES2 68 1/8 (173) 58 3/4 (149) 22 (56) 29 1/8 (74) 11 (28) 14 1/4 (36) 51 3/4 (131) 15 1/4 (39) 192 (87) JW850S62N-PV-ES2 61 1/8 (155) 52 (132) 24 (61) 31 1/8 (79) 11 (28) 14 1/4 (36) 44 1/2 (113) 15 1/4 (39) 212 (96) JW860S42N-PV-ES2 67 1/4 (171) 57 7/8 (147) 24 (61) 31 1/8 (79) 11 (28) 14 1/4 (36) 50 3/8 (128) 15 1/4 (39) 216 (98) JW875T72N-PV-ES2 70 5/8 (179) 61 1/4 (156) 26 (66) 33 1/8 (84) 11 (28) 14 1/4 (36) 53 (135) 15 1/4 (39) 277 (126) E F G H lb (kg) For Propane replace N with P. D C H G B A E F Power Vent - ENERGY STAR Qualified 9

16 Power Direct Vent ENERGY STAR Qualified Features ENERGY STAR qualified Sealed combustion chamber design maintains indoor air quality as no indoor air is required for combustion Industry leading, ultra quiet blower continues the John Wood tradition of quiet power vent water heaters Convenient 3/4 side water connections for combination applications Can be vented with ULC S636 approved PVC, CPVC or polypropylene up to 100 equivalent feet, horizontally through the wall or vertically through the roof (see installation manual for full details) PERFORMANCE Model Capacity Maximum Certified Altitude Input Recovery Rate at 100 F/55 C Temp. Rise First Hour Rating Energy Factor USG (L) ft (m) BTU/h GPH (LPH) USG (L) NATURAL GAS JW4040SN-PDV-ES2 40 (151) 7,700 (2,347) 40, (128) 72 (273) 0.67 JW5040SN-PDV-ES2 50 (189) 7,700 (2,347) 40, (148) 87 (329) 0.67 JW85065SN-PDV-ES2* 50 (189) 7,700 (2,347) 65, (244) 114 (432) 0.67 PROPANE G4040SP-PDV-ES2 40 (151) 7,700 (2,347) 40, (128) 72 (273) 0.67 G5040SP-PDV-ES2 50 (189) 7,700 (2,347) 40, (148) 87 (329) 0.67 * Model has side connections aall models are BC Compliant. 10 Power Direct Vent - ENERGY STAR Qualified

17 DIMENSIONS & SHIPPING WEIGHT Model NATURAL GAS Installation Height A Height to Top of Tank B Tank Diameter C Overall Depth D Height to Gas Inlet E Height to T&P F Height to Drain Valve G Height to Side Water Connections (not shown on drawing) Lower Upper Vent Diameter Approx. Shipping Weight in lb (kg) JW4040SN-PDV-ES2 59 1/2 (151) 51 (130) 22 1/2 (57) 25 3/8 (64.5) 15 (38) 43 1/2 (111) 10 3/4 (27) N/A N/A (73) JW5040SN-PDV-ES2 68 1/2 (174) 60 (152) 22 1/2 (57) 25 3/8 (64.5) 15 (38) 52 1/2 (134) 10 3/4 (27) N/A N/A (82) JW85065SN-PDV-ES2 69 3/4 (177) 61 1/4 (156) 22 1/2 (57) 25 3/8 (64.5) 15 (38) 53 (135) 10 3/4 (27) 16 (41) 53 (135) (95) PROPANE G4040SP-PDV-ES2 59 1/2 (151) 51 (130) 22 1/2 (57) 25 3/8 (64.5) 15 (38) 43 1/2 (111) 10 3/4 (27) N/A N/A (73) G5040SP-PDV-ES2 68 1/2 (174) 60 (152) 22 1/2 (57) 25 3/8 (64.5) 15 (38) 52 1/2 (134) 10 3/4 (27) N/A N/A (82) Power Direct Vent - ENERGY STAR Qualified 11

18 Direct Vent A unique balanced flue design. Features Thermopile design provides robust pilots to withstand down drafts and environmental conditions LED indicator light lets you know when pilot is in operation and provides diagnostic capabilities Easy temperature adjustment Use outside air for combustion Meet latest NRCan energy efficiency standards No external power supply required Easy to install flexible co-axial vent supplied with the water heater Can be vented 90 horizontally Vent kit with termination is include FlameSafe FVIR technology PERFORMANCE Model Capacity USG (L) Input BTU/h Recovery Rate at 100 F/55 C Temp. Rise GPH (LPH) First Hour Rating USG (L) Energy Factor BC Compliant NATURAL GAS JW640BFNA-FV Series (151) 38, (129) 73 (286) JW650TBFNA-FV Series (189) 42, (144) 87 (329) JW650THBFNA-FV* Series (189) 50, (186) 88 (333) PROPANE JW640BFP-FV Series (151) 38, (129) 73 (286) JW650TBFP-FV Series (189) 42, (144) 87 (329) * Model has side connections 12 Direct Vent

19 DIMENSIONS & SHIPPING WEIGHT Model Installation Height A Height to Top of Tank B Tank Diameter C Height to Drain Valve D Height to Gas Inlet E Height to T&P Valve F Heights to Side Water Connections (where applicable) G H Approx. Shipping Weight lb (kg) NATURAL GAS JW640BFNA-FV Series /4 (144) 52 (132) 22 1/4 (57) 12 1/4 (31) 16 (40) 45 1/4 (114) N/A N/A 167 (76) JW650TBFNA-FV Series /4 (167) 61 (155) 22 1/4 (57) 12 1/4 (31) 16 (40) 54 (137) N/A N/A 185 (84) JW650THBFNA-FV Series /8 (169) 62 1/4 (158) 22 1/4 (57) 12 1/2 (32) 16 1/4 (41) 55 1/2 (140) 16 1/2 (42) 53 3/4 (136) 187 (85) PROPANE JW640BFP-FV Series /4 (144) 52 (132) 22 1/4 (57) 12 1/4 (31) 16 (40) 45 1/4 (114) N/A N/A 167 (76) JW650TBFP-FV Series /4 (167) 61 (155) 22 1/4 (57) 12 1/4 (31) 16 (40) 54 (137) N/A N/A 185 (84) SIDE TAPS FRONT RIGHT A H B G C D E F Direct Vent 13

20 Envirosense Power Direct Vent 96% Thermal Efficiency Features Power Direct Vent design for installation versatility vents up to 128 equivalent feet. (See manual for complete details) Available for Natural Gas or Propane Side water connections for recirculating systems Advanced electronic control with large LCD display Glass lined tank with two magnesium anode rods. Fully submerged, spiral-shaped condensing heat exchanger Concentric Vent Kits and Condensate Neutralizer Kits available Approved for one-pipe (PV) or two-pipe (PDV) venting GAS-FIRED LISTED PERFORMANCE Model Capacity Maximum Certified Altitude Input Recovery Rate at 90 F Temp. Rise First Hour Rating Thermal Efficiency USG (L) ft (m) BTU/h GPH (LPH) USG (L) NATURAL GAS 6G50100NPDVH (189) 10,000 (3,048) 100, (488) 73 (286) 96% PROPANE 6G50100PPDVH (189) 10,000 (3,048) 100, (488) 73 (286) 96% aall models are BC Compliant. 14 Envirosense Power Direct Vent

21 DIMENSIONS & SHIPPING WEIGHT Model Height A in. (cm) Upper Side Connect B in. (cm) Tank Diameter C in. (cm) Lower Side Connect D in. (cm) Drain Valve E in. (cm) Inlet & Outlet Distance F in. (cm) Approx. Shipping Weight lb (kg) NATURAL GAS 6G50100NPDVH /2 (174) 49 1/4 (126) 22 (56) 15 3/4 (40) 3 (8) 8 (20) 255 (116) PROPANE 6G50100PPDVH /2 (174) 49 1/4 (126) 22 (56) 15 3/4 (40) 3 (8) 8 (20) 255 (116) Envirosense Power Direct Vent 15

22 Envirosense Power Vent 90% Thermal Efficiency Features Power Vent design for installation versatility vents up to 128 equivalent feet. (See manual for complete details) Side-mounted taps for recirculating systems. Intelli-Vent gas control with silicon nitride hot surface igniter Commercial-grade glass lining with two magnesium anode rods Available in Natural Gas only Concentric Vent Kits and Condensate Neutralizer Kits available GAS-FIRED LISTED PERFORMANCE Model Capacity Maximum Certified Altitude Input Recovery Rate at 90 F Temp. Rise First Hour Rating Thermal Efficiency USG (L) ft (m) BTU/h GPH (LPH) USG (L) NATURAL GAS 6G5076NVC02 50 (189) 5,300 (1,615) 76, (347) 127 (481) 90% amodel is BC Compliant. 16 Envirosense Power Vent

23 DIMENSIONS & SHIPPING WEIGHT Model Installation Height Height to Top of Tank Height to Side Outlet A B C NATURAL GAS 6G5076NVC /8 (179) 68 1/4 (173) 52 (132) Height to Side Inlet D 21 (53) Height to Drain Valve E 9 1/8 (23) Height to Thermostat Tank Diameter Distance between Inlet and Outlet Depth of Inlet and Outlet to Thermostat Overall Depth Approx. Shipping Weight F G H I J lb (kg) 12 (31) 22 (56) 8 (20) 15 2/3 (40) 27 (69) 210 (95) Envirosense Power Vent 17

24 Polaris The quiet and efficient way to heat water. Features High grade stainless steel tank with brass connections for years of dependable service no anode required Submerged combustion chamber with spiral flue for 95-96% thermal efficiency and ultralow standby heat loss Woven metal fibre burner made of refractory steel resists corrosion, produces low NOx emissions and is resistant to thermal and mechanical shocks Plug-and-play technology with no special adjustments at initial startup including no adjustments or de-rating for high altitude installations Specifically designed for space heating PERFORMANCE Model Capacity Input Recovery Rate at 90 o F Temp. Rise USG (L) BTU/h GPH (LPH) Thermal Efficiency NATURAL GAS PR NV 34 (129) 100, (488) 96% PR NV 34 (129) 130, (636) 96% PR NV 34 (129) 150, (727) 96% PR NV 50 (189) 130, (628) 95% PROPANE PR PV 34 (129) 100, (488) 96% PR PV 34 (129) 130, (636) 96% PR PV 50 (189) 130, (628) 95% aall models are BC Compliant. 18 Polaris Residential

25 DIMENSIONS & SHIPPING WEIGHT Model Height A Height to T&P Valve B Cold Water Inlet* C Gas Inlet D Heating System Inlet* E Heating System Outlet* F Diameter G Vent Diam. Approx. Shipping Weight lb (kg) NATURAL GAS PR NV 48 1/2 (123) 41 (104) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 40 1/2 (103) 22 (56) 2-3 (5-8) 150 (68) PR NV 48 1/2 (123) 41 (104) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 40 1/2 (103) 22 (56) 2-3 (5-8) 150 (68) PR NV 48 1/2 (123) 41 (104) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 40 1/2 (103) 22 (56) 2-3 (5-8) 150 (68) PR NV 62 1/2 (159) 55 (140) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 54 1/2 (138) 22 (56) 2-3 (5-8) 176 (80) PROPANE PR PV 48 1/2 (123) 41 (104) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 40 1/2 (103) 22 (56) 2-3 (5-8) 150 (68) PR PV 48 1/2 (123) 41 (104) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 40 1/2 (103) 22 (56) 2-3 (5-8) 150 (68) PR PV 62 1/2 (159) 55 (140) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 54 1/2 (138) 22 (56) 2-3 (5-8) 176 (80) *1 NPT water connections. F E D G USG C B A Polaris Residential 19

26 Electric The optimum in reliability, performance and energy efficiency. Features Meets and exceeds NRCan energy efficiency standards Wide variety of models available to meet energy efficiency compliance standards nationwide Patented Styropour base for added energy efficiency Exclusive TankSaver design to prolong tank life. Glass-lined tank for longer life Factory-installed plastic-lined nipples. Thermostatically controlled, long life elements Brass drain valve Quick recovery models available, suitable for the builder market CFC-free foam insulation Conveniently located T&P and drain valve for ease of installation and serviceability Removable anode(s) C 20 US PERFORMANCE Electric Elements Standby First Hour (Upper and Lower) Loss Rating Model Capacity BC Imp. Gal. USG L Watts Volts Watts USG (L) Compliant TOP ENTRY JW850SDE (221) a JW850SDE (221) JW850SDE (221) a JW850SDE * (221) JW850SDE OR (221) JW850SDE (221) a JW880TDE (298) a JW880TDE (298) a JW880TDE (298) a TOP ENTRY, INCOLOY ELEMENT JW850SDE (221) JW880TDE (298) a BOTTOM ENTRY JW850SDEB (221) a JW850SDEB * (221) OR a 240 JW880TDEB (298) a *For 208V configurations, add X to end of model number (e.g. JW850SDE-30X)

27 DIMENSIONS & SHIPPING WEIGHT Model Height to Top of Tank Tank Diameter A B Approximate Shipping Weight lb (kg) TOP ENTRY JW850SDE /4 (124) 22 (56) 129 (59) JW850SDE (122) 21 1/2 (55) 121 (55) JW850SDE /4 (124) 22 (56) 129 (59) JW850SDE (122) 21 1/2 (55) 121 (55) JW850SDE /4 (124) 22 (56) 129 (59) JW850SDE (122) 21 1/2 (55) 121 (55) JW880TDE /2 (154) 24 (61) 208 (95) JW880TDE /2 (154) 24 (61) 208 (95) JW880TDE /2 (154) 24 (61) 208 (95) TOP ENTRY, INCOLOY ELEMENT JW850SDE (122) 21 1/2 (55) 121 (55) JW880TDE /2 (154) 24 (61) 208 (95) BOTTOM ENTRY JW850SDEB (122) 22 (56) 123 (56) JW850SDEB (122) 22 (56) 123 (56) JW880TDEB /2 (154) 24 (61) 212 (96) JW880TDEB /2 (154) 24 (61) 212 (96) Electric 21

28 SpaceSaver Put hot water right where you need it! Features Designed for installation in cottages, offices, mobile homes and other applications where space is limited Meets latest energy efficiency standards Personnel protector covers elements and controls for added safety C US PERFORMANCE Model Capacity Elements Upper and Lower Standby Loss BC Compliant USG (L) Watts/Volts Watts PLUG-IN SINGLE ELEMENT MODEL SS025SE (10) 1500W/120V n/a a SIDE ENTRY, SINGLE ELEMENT MODELS SS06SEB W/120V a 6 (23) n/a SS06SEB W/240V a SS12SEB W/120V a 12 (43) n/a SS12SEB W/240V a SS20SSEB-15K 1500W/120V a 19 (65) 51 SS620SSEB W/240V a SS630SSEB-15K 1500W/120V a 30 (108) 48 SS630SSEB W/240V a TOP ENTRY, DOUBLE ELEMENT MODELS SS640SDE-15K 1500W/120V a SS640SDE-30X 40 (143) 3000W/208V 54 a SS640SDE W/240V a LOWBOY TOP ENTRY, DOUBLE ELEMENT MODELS SS630LDE (108) 4500W/240V 53 SS640LDE (143) 4500W/240V 62 SS650LDE (182) 4500W/240V SpaceSaver (Electric)

29 DIMENSIONS & SHIPPING WEIGHT Model Height (A) Diameter (B) Approx. Shipping Weight lbs (cm) PLUG-IN SINGLE ELEMENT MODEL SS025SE15 14 (36) 11 (28) 20 (9) SIDE ENTRY, SINGLE ELEMENT MODELS SS06SEB15 SS06SEB30 SS12SEB15 SS12SEB30 SS620SSEB-15K SS620SSEB-30 SS630SSEB-15K SS630SSEB-30 TOP ENTRY, DOUBLE ELEMENT MODELS SS640SDE-15K SS640SDE-30X SS640SD /4 (39) 14 1/4 (36) 35 (16) 22 3/4 (58) 16 (41) 55 (25) 25 1/2 (65) 19 (48) 65 (30) 30 (76) 22 (56) 90 (41) 48 (122) 20 (51) 110 (50) LOWBOY TOP ENTRY, DOUBLE ELEMENT MODELS SS630LDE (79) 22 (56) 98 (44) SS640LDE /2 (82) 24 (61) 125 (57) SS650LDE (84) 26 1/2 (66) 162 (73) B SpaceSaver (Electric) 23

30 Oil-Fired Features Immersion-type aquastat for precise water temperature control Universal mounting design fits most burners. Ceramic fibre combustion chamber maximizes heat retention Includes blocked flue safety switch Suitable for combination applications, potable water and space heating C US Oil burners designed by Beckett Easy to install AFG Burner comes with Beckett Clean Cut Fuel Unit, Beckett R7184 Series 5 Primary Control, self-centering Nozzle Line Electrode Assembly and one piece Flame Retention Head PERFORMANCE Model Capacity Standard Firing Rate Input BTU/h Recovery Rate at 100 F/55 C Temp. Rise First Hour Rating USG (L) USG/h BTU/h GPH (LPH) USG (L) CENTER-FLUE RESIDENTIAL Tube Insertion Length Combustion Energy Factor Efficiency JWF (121) , (318) 110 (416) 4 3/4 (12) 77 80% 0.60 JWF (189) , (379) 190 (719) 5 3/4 (15) 77 80% 0.55 DIRECT VENT** JWF307V 32 (121) , (318) 110 (416) 4 3/4 (12) 79 81% 0.60 Notes: JWF307, JWF507, meet NAECA and DOE standards. **Direct vent models must use vent kit and burner supplied by John Wood with pre-purge and post-purge features. Burners are sold separately and warranted by the burner manufacturer. 24 Oil-Fired

31 DIMENSIONS & SHIPPING WEIGHT Model Installation Height A Height to Top of Tank B Tank Diameter Vent Diameter C D Water Connection (NPT) Approximate Shipping Weight in lb (kg) CENTER-FLUE RESIDENTIAL JWF /4 (134) 50 5/8 (129) 20 (51) 6 (15) 3/4 172 (78) JWF /2 (154) 58 1/2 (149) 22 (56) 6 (15) 3/4 214 (97) DIRECT VENT JWF307V 52 3/4 (134) 50 5/8 (129) 20 (51) 6 (15) 3/4 172 (78) Oil Burners by Beckett SKU GPH Input BTU Input BURNERS - CENTRE FLUE MODELS J ,000 J ,000 J ,000 BURNERS - DIRECT VENT MODEL J ,000 5,10 or 20 kits available for JWF307V (Factory length not to be altered) Oil-Fired 25

32 Storage Booster Tanks Exclusive, patented innovation. Features Equipped with an adjustable thermostat, pre-wired and ready for connection to a circulator pump for accurate and automatic temperature control Factory-installed nipples for easy installation 2 of CFC-free foam insulation SUPPLY (TO BOILER TANKLESS COIL) HOT OUTLET ANODE JUNCTION BOX T&P VALVE ACCESS DOORS CIRCULATOR PUMP HOT CHECK VALVE THERMOSTAT CONTROL EXPANSION TANK (OPTIONAL) PRESSURE REGULATOR (OPTIONAL) COLD THERMOSTAT RETAINER COMBINATION RETURN & DRAIN VALVE T&P VALVE HOT TANKLESS COIL BOILER STORAGE BOOSTER TANK COMBINATION RETURN & DRAIN VALVE 26 Storage Booster Tanks

33 DIMENSIONS & SHIPPING WEIGHT Model Capacity Water Connections (NPT) Height Diameter Approx. Shipping Weight USG (Litres) in lb (kg) JW5-40SB 40 (151) 3/4 47 1/4 (120) 20 (51) 123 (56) JW5-50SB 50 (189) 3/4 48 3/4 (124) 22 (56) 136 (62) JW5-80SB 80 (303) 3/4 59 (150) 24 (61) 201 (91) All models comply with ASHRAE, 90.1-b-1992 standards. Storage Booster Tanks 27

34 FlowTHRU Storage tanks specifically designed to complement our series of tankless water heaters. Features Exclusive TankSaver design works to prolong tank life Factory installed dielectric nipples for ease of installation T&P valve conveniently located on the side. Top access junction box for convenient electrical hook-up Equipped with an adjustable thermostat, prewired and ready for connection to a circulator pump C US 28 FlowTHRU

35 DIMENSIONS & SHIPPING WEIGHT Model Capacity Height Diameter USG (L) A in. (cm) B in. (cm) Approx. Shipping Weight lb. (kg) ST (67) 25 1/2 (65) 19 (49) 65 (29) ST (108) 31 1/2 (80) 22 1/2 (57) 94 (42) FlowTHRU 29

36 Range Boiler Glass lined, painted tank. JWT US Gallon Capacity/151 L 14 Diameter 1 Pipe Connections 150 PSI working pressure JWT Range Boiler

37 Tankless

38

39 Powered by The John Wood powered by Takagi condensing tankless water heaters provide endless hot water. The durable primary heat exchanger is made of HRS35 commercial-grade copper while the secondary heat exchanger is made of Type 316L stainless steel, preventing corrosion and prolonging the life of the heater. These direct vent models combine durability and versatility in an easy-toinstall space-saving design. Features of Condensing Tankless Models: Integrated temperature and error display Advanced safety features 0.95 Energy Factor Approved with ULC s636 PVC or CPVC or polypropylene Internal freeze protection system

40 John Wood powered by Takagi Tankless High-efficiency condensing water heaters. Features ENERGY STAR qualified Unprecedented 0.95 Energy Factor Advanced safety features help prevent scalding dangers High-efficiency units cut water heating costs and conserve energy Durable primary heat exchanger is made of HRS35 commercial-grade copper while the secondary heat exchanger is made of Type 316L stainless steel, preventing corrosion and prolonging the life of the heater Available inputs: up to 199,000 BTU Can be vented using ULC s636 approved PVC or CPVC or polypropylene pipe Factory-installed power cord and integrated controls Concentric vent kit available Fully modulating 32 John Wood powered by Takagi Tankless (Condensing)

41 PERFORMANCE & DIMENSIONS Model Application NATURAL GAS JWT-240H-DV-N Heavy Residential JWT-340H-DV-N Heavy Residential JWT-540H-DV-N PROPANE Heavy Residential/ Light Commercial JWT-240H-DV-P Heavy Residential JWT-340H-DV-P Heavy Residential JWT-540H-DV-P Heavy Residential/ Light Commercial Input BTU/h 15, ,000 15, ,000 15, ,000 13, ,000 13, ,000 13, ,000 Max. Flow Rate GPM at 70 F Rise Energy Factor Height Width Depth Approximate Shipping Weight lb (kg) /2 (57) 17 3/4 (45) 10 3/4 (27) 58 (26) /2 (57) 17 3/4 (45) 10 3/4 (27) 58 (26) /2 (57) 17 3/4 (45) 10 3/4 (27) 58 (26) /2 (57) 17 3/4 (45) 10 3/4 (27) 58 (26) /2 (57) 17 3/4 (45) 10 3/4 (27) 58 (26) /2 (57) 17 3/4 (45) 10 3/4 (27) 58 (26) John Wood powered by Takagi Tankless (Condensing) 33

42 John Wood powered by Takagi Tankless Residential & Commercial models for any application. Non-Condensing Models Feature: Durable primary heat exchanger is made of HRS35 commercial-grade copper which has 8 times the tensile strength of standard copper and prevents corrosion, prolonging the life of the heater Residential models are ENERGY STAR qualified Advanced safety features help prevent scalding dangers Factory-installed power cord and temperature remote control included (except 710 and 910 models) Flow Rate Guide Temperature Rise vs. Gallons per minute Temp Rise (of) JWT- 110 Non-Condensing Models JWT- 310 JWT- 510 JWT- 710 JWT- 910 Condensing Models JWT- 240H JWT- 340H JWT- 540H *Note: Refer to pages 33 and 35 for specific models and dimensions. 34 John Wood powered by Takagi Tankless

43 PERFORMANCE & DIMENSIONS Model Application Input Range BTU/h Max. Flow Rate GPM at 70 F Rise Energy Factor Thermal Efficiency Height Width Depth Approx. Shipping Weight lb (kg) ENERGY STAR NATURAL GAS JWT-110-N Residential 19, , n/a 20 1/2 (52) 13 3/4 (35) 6 3/4 (17) 33 (15) YES JWT-310-N Residential 11, , n/a 20 1/2 (52) 13 3/4 (35) 8 1/2 (22) 38 (17) YES JWT-510-N Light Commercial/ Heavy Residential 11, , n/a 20 1/2 (52) 13 3/4 (35) 8 1/2 (22) 38 (17) YES JWT-710-N Commercial 24, , n/a 82.2% 23 5/8 (60) 18 1/2 (47) 10 (25) 59 (27) YES JWT-910-N Commercial 15, , n/a 80.2% 24 7/8 (63) 25 1/4 (64) 12 1/4 (31) 112 (51) PROPANE JWT-110-P Residential 19, , n/a 20 1/2 (52) 13 3/4 (35) 6 3/4 (17) 33 (15) YES JWT-310-P Residential 11, , n/a 20 1/2 (52) 13 3/4 (35) 8 1/2 (22) 38 (17) YES JWT-510-P Light Commercial/ Heavy Residential 11, , n/a 20 1/2 (52) 13 3/4 (35) 8 1/2 (22) 38 (17) YES JWT-710-P Commercial 24, , n/a 83.9% 23 5/8 (60) 18 1/2 (47) 10 (25) 59 (27) YES JWT-910-P Commercial 15, , n/a 82.4% 24 7/8 (63) 25 1/4 (64) 12 1/4 (31) 112 (51) John Wood powered by Takagi Tankless 35

44 COMMERCIAL High Efficiency Condensing Gas Water Heaters Designed for outstanding reliability and excellent thermal efficiency for your commercial applications. Fully submerged, spiral-shaped condensing heat exchanger Top mounted controls for easy installation Advanced microprocessor controls ignition and thermostat Commercial grade glass lined tank and heat exchanger Factory installed T&P valve For more information see pages 38 and 39 in this book or visit

45 Commercial

46

47 John Wood Commercial A proud tradition of leadership. John Wood commercial models have been specifically designed for the needs of the professional installer. Our extensive line of commercial gas water heaters is complimented by high efficient models. What s more, our commercial electric models can be custom built-to-order to ensure your exact specifications are met. Some of our heaters feature exclusive TankSaver stainless steel inserts and glass lined tanks for longer life. John Wood Commercial 37

48 COMMERCIAL Commercial High Efficient Gas Up to 96% Thermal Efficiency Features Flexible venting options using ULC s636 PVC or CPVC Powered anodes that provide superior tank protection Approved for sanitizing applications. Available input rates: 150,000 BTU, 199,900 BTU, 250,000 BTU, 300,000 BTU and 400,000 BTU Available in Natural Gas or Propane with ASME construction (optional on 150/199 and 250,000 BTU models) Space-saving design with zero clearance to combustibles for a wide-range of installation applications Concentric Vent Kits and Condensate Neutralizer Kits available PERFORMANCE Model Gas Type Input Rate Thermal Efficiency (A)JWSH (A)JWSH (A)JWSH AJWSH AJWSH NG/LP NG/LP NG/LP NG/LP NG/LP Tank Capacity Recovery 100 F (55 C) BTU/h (kw) USG (L) GPH (LPH) 150,000 (44) 199,900 (58) 250,000 (73) 300,000 (88) 399,900 (117) 95% 95% 95% 96% 96% 100 (379) 100 (379) 100 (379) 130 (492) 130 (492) 173 (654) 230 (871) 288 (1090) 349 (1322) 466 (1763) 38 Commercial High Efficient Gas

49 DIMENSIONS & SHIPPING WEIGHT Model Height to Drain Valve ( k BTU) A Overall Diameter B Height to Water Inlet / Drain Valve ( k BTU) C Height to T&P Valve D Installation Height E Height to Supply Gas Connection F Height to Vent Connection G Height to Water Outlet H Height to Air Intake I Approx. Shipping Weight (lb/kg) STD ASME (A)JWSH (8) 27 3/4 (71) 6 5/16 (16) 55 1/2 (141) 75 1/2 (192) 68 1/2 (174) 11 (28) 63 (160) 69 (175) 555 (252) 595 (269) (A)JWSH (8) 27 3/4 (71) 6 5/16 (16) 55 1/2 (141) 75 1/2 (192) 68 1/2 (174) 11 (28) 63 (160) 69 (175) 555 (252) 595 (269) (A)JWSH (8) 27 3/4 (71) 6 5/16 (16) 55 1/2 (141) 75 1/2 (192) 75 1/2 (192) 11 (28) 63 (160) 69 (175) 555 (252) 595 (269) AJWSH /8 (84) 4 7/8 (12) 50 3/4 (129) 75 1/2 (192) 75 1/2 (192) 12 (30.5) 63 (160) 69 (175) (383) AJWSH /8 (84) 4 7/8 (12) 50 3/4 (129) 75 1/2 (192) 75 1/2 (192) 12 (30.5) 63 (160) 69 (175) (383) Commercial High Efficient Gas 39

50 COMMERCIAL Commercial Atmospheric Gas Handles a wide-range of applications. Features Inputs available range from 120,000 to 500,000 BTU Intermittent Electronic Ignition saves energy by eliminating the standing pilot High pressure water jets reduce the sediment at the bottom of the tank to prolong tank life. Meets or exceeds 80% thermal efficiency Inlet and outlet ports at the top, back and front for convenience of installation Multiple anodes and glass lined tank to extend tank life ASME construction available Power vent kits available for these models PERFORMANCE AND RECOVERY RATE GPH / LPH Model* Input Rate BTU/h (kw/h) Tank Capacity USG (L) Thermal Efficiency 100 F (55 C) Temp. Rise GPH (LPH) JWSM ,000 (35) 71 (268) 80% 116 (439) JWSM ,000 (45) 81 (307) 80% 149 (564) JWSM ,000 (58) 95 (360) 80% 193 (731) JWSM ,000 (58) 76 (288) 80% 184 (697) AJWSM ,000 (58) 100 (379) 80% 193 (731) (A)JWSM ,000 (73) 65 (246) 80% 243 (921) AJWSM ,000 (80) 100 (379) 80% 267 (1009) (A)JWSM ,000 (89) 65 (246) 80% 296 (1120) (A)JWSM ,000 (107) 65 (246) 80% 349 (1321) AJWSM ,000 (114) 100 (379) 80% 388 (1468) AJWSM ,000 (147) 85 (322) 80% 485 (1835) *For Natural Gas add N, for Propane add P to end of model numbers. For High Altitude (2,000-4,500 ft.), add H to end of model numbers. (Example: For model JWSM in Natural Gas, High Altitude = JWSM NH.) Recoveries based on Sea Level (0-2,200 ft) 40 Commercial Atmospheric Gas

51 DIMENSIONS & SHIPPING WEIGHT Model Installation Height A Height to Gas Inlet B Height to Top of Tank C Height to T&P D Height to Front Inlet E Distance Between Top Inlet/ Outlet F Gas Valve Diam. G in Height to Front Outlet H Drafthood Connection Diam. I Tank Diameter J Approx. Shipping Weight STD. ASME lb (kg) lb (kg) JWSM /4 (177) 4 1/4 (11) 59 1/2 (151) 50 3/4 (129) 19 3/4 (50) 19 (48) 1/2 51 3/4 (132) 5 (13) 27 3/4 (71) 400 (182) N/A JWSM (185) 4 1/4 (11) 66 1/2 (169) 57 3/4 (147) 19 3/4 (50) 19 (48) 1/2 59 (150) 6 (15) 27 3/4 (71) 470 (213) N/A JWSM (192) 4 1/2 (12) 70 (178) 61 5/8 (157) 20 1/2 (52) 21 (53) 1/2 62 5/8 (159) 6 (15) 27 3/4 (71) 603 (273) N/A JWSM /2 (171) 4 1/2 (12) 62 (157) 53 5/8 (136) 20 1/2 (52) 21 (53) 1/2 54 5/8 (139) 6 (15) 27 3/4 (71) 470 (213) N/A AJWSM (183) 4 1/2 (12) 65 1/8 (165) 55 7/8 (142) 19 3/4 (50) 23 (58) 1/2 56 3/8 (143) 6 (15) 30 1/4 (77) N/A 725 (329) (A)JWSM (191) 4 1/2 (12) 65 3/4 (167) 57 1/4 (145) 20 (51) N/A 1/2 58 3/4 (149) 8 (20) 27 3/4 (71) 750 (341) 862 (391) AJWSM (183) 4 1/2 (12) 65 1/8 (165) 55 7/8 (142) 19 3/4 (50) 23 (58) 1/2 56 3/8 (143) 8 (20) 30 1/4 (77) N/A 725 (329) (A)JWSM (191) 4 1/2 (12) 65 3/4 (167) 57 1/4 (145) 20 (51) N/A 1/2 58 3/4 (149) 8 (20) 27 3/4 (71) 750 (341) 862 (391) (A)JWSM /2 (202) 4 1/2 (12) 70 1/4 (178) 62 1/2 (159) 22 1/2 (57) 23 (68) 3/4 63 (160) 8 (20) 27 3/4 (71) 725 (329) 833 (379) AJWSM /2 (192) 4 1/2 (12) 67 1/2 (171) 58 1/4 (148) 26 3/4 (68) 23 (58) 3/4 59 (150) 8 (20) 30 1/4 (77) N/A 874 (396) AJWSM /4 (209) 4 1/2 (12) 73 1/2 (187) 65 1/4 (166) 25 1/2 (65) 21 (53) /4 (167) 8 (20) 27 3/4 (71) N/A 857 (389) Commercial Atmospheric Gas 41

52 Commercial Electric Custom built-to-order. Features Meets or exceeds ASHRAE Efficiency Standard Gold-plated, long-life elements provide superior scaling resistance Glasslined tank rated at 150 psi (working pressure) Factory-installed terminal block allows for quick connection Power circuit fusing protects elements and contactors from short circuits, overloading or line surges Three standard voltages available - convertible in the field from three-phase to single-phase (except 208/54kW models) JW-EI models feature an advanced electronic control - displays operational and diagnostic information and has economy mode option for off-peak or unoccupied periods Factory installed T&P and brass drain valve Equipped with multiple anode rods for longer life Simplified circuitry, colour-coded for ease of service 42 CONFIGURING YOUR MODEL 1. Select thermostat Surface (ES) or Immersion (EI) Select capacity required (USG) Select input (kw) 6-54** 4. Select voltage 208, 240 or 600 (600 Volt available in 3 Ph only) 5. Select phase 1 or 3 Example: JW-EI is a 74 U.S. Gallon, 45 kw, 240 volt, 1 phase model with an Immersion Thermostat. *Note: 600 Volt configurations are only available as 3 Phase **JW-ES 50 USG models available up to 36 kw only Commercial Electric

53 DIMENSIONS Model Capacity Installation Height Height to Top of Tank Overall Depth Inlet / Outlet (NPT) USG (L) A B C Approx. Shipping Weight lb (kg) JW-E(S/I) (189) 55 3/4 (142) 21 3/4 (55) 27 (69) 1 1/4 (3.2) 265 (120) JW-E(S/I) (303) 60 1/4 (153) 25 1/2 (65) 31 (79) 1 1/4 (3.2) 280 (127) JW-E(S/I) (450) 62 1/4 (158) 29 1/2 (75) 35 (89) 1 1/4 (3.2) 390 (177) JW-EI Model shown Commercial Electric 43

54 COMMERCIAL Commercial Oil-Fired High output, high efficiency. Features Multi-flue design for fast recovery Equipped with multiple anode rods for long life Factory installed T&P and drain valve. Universal mounting design suits most burners Includes blocked flue safety switch in accordance with CSA B TankSaver technology See Pages for more information about Beckett burners PERFORMANCE Model Capacity Standard Firing Rate Input BTU/h Recovery Rate at 100 F/55 C Temp. Rise First Hour Rating Tube Insertion Length USG (L) USG/h USG (L) USG (L) Combustion Efficiency CENTER-FLUE COMMERCIAL JWF (238) , (488) 163 (617) 7 3/4 (20) 82 86% Notes: JWF657 meets ASHRAE/IES 90.1b-1992 energy standards. 44 Commercial Oil-Fired

55 DIMENSIONS & SHIPPING WEIGHT Model CENTER-FLUE COMMERCIAL Installation Height A Height to Top of Tank B Tank Diameter Vent Diameter C D Water Connection (NPT) Approximate Shipping Weight in lb (kg) JWF /4 (175) 65 3/8 (166) 26 (66) 6 (15) (172) Commercial Oil-Fired 45

56 Commercial Storage Tanks Available in 80 and 119 USG models. Features Glass-lined tank to protect against corrosion Threaded openings - for thermometer, relief valve, 2 recirculation lines, aquastat and drain valve Magnesium anode(s) 150 psi working pressure Insulated models use high density fiberglass insulation to reduce costly heat loss; nonsagging and vermin-proof 46 Commercial Storage Tanks

57 DIMENSIONS & SHIPPING WEIGHT Model Capacity USG (L) A in (cm) B in (cm) C in (cm) D in (cm) JWCST (303) JWCE-80 (Bare Tank) JWCST-119 JWCE-119 (Bare Tank) 80 (303) 119 (454) 119 (454) 62 1/4 (158) 61 1/2 (156) 62 (157) 64 3/8 (164) 23 1/4 (59) 20 (51) 29 3/8 (75) 24 1/4 (62) NA (NA) 58 (147) 54 (138) 53 7/8 (137) 44 1/2 (113) 46 1/4 (117) 42 (107) 34 1/2 (88) E in (cm) NA (NA) 16 (41) 15 (38) 15 1/2 (39) F in (cm) 16 (41) 7 (18) 11 (28) 7 (18) G in (cm) 3 5/8 (9) 3 1/4 (8) 4 1/8 (10) 3 1/2 (9) H in (cm) NA (NA) 3/4 (2) 3/4 (2) 3/4 (2) I in (cm) 2 (5) 2 (5) 2 (5) 2 (5) J in (cm) 2 (5) 2 (5) 2 (5) 2 (5) K in (cm) NA (NA) 2 (5) 1 (3) 2 (5) Approximate Shipping Weight lb (kg) 236 (137) 170 (77) 320 (145) 287 (130) Commercial Storage Tanks 47

58 Light Duty Commercial Gas The right atmospheric vent for lower demand commercial applications. Features Glasslined tank Fully automatic controls with safety shutoff Heavy gauge steel jacket Foam insulation helps reduce standby heat loss Certified for installation on combustible flooring All connections are located in front and top of heaters for ease of installation and service Low profile draft hood Maximum working pressure150 psi Handhole cleanout allows easy tank cleaning Built-in gas filter and integral dirt leg (propane only) Equipped with gas pressure regulator PERFORMANCE Model Capacity Maximum Certified Altitude Input Recovery at 100 F/55 C Rise USG (L) ft (m) BTU/h USG (L) Energy Factor NATURAL GAS JW3-75T75N-AV 75 (284) 7,700 (2,344) 75, (275) N/A PROPANE JW3-75T75P-AV 75 (284) 7,700 (2,344) 75, (275) N/A 48 Light Duty Commercial Gas

59 DIMENSIONS & SHIPPING WEIGHT Model Dimensions A B C D E F G H J K L M NATURAL GAS JW375T75N-AV PROPANE 61 1/8 (155) 58 1/2 (149) 29 11/16 (75) 26 1/2 (67) 15 13/16 (39) 4 (10) 141/2 (38) 16 (41) 11/4 (3) 1 NPT 1/2 NPT 115/16 (30) JW375T75P-AV 61 1/8 (155) 58 1/2 (149) 29 11/16 (75) 26 1/2 (67) 15 13/16 (39) 4 (10) 141/2 (38) 16 (41) 11/4 (3) 1 NPT 1/2 NPT 115/16 (30) Approx. Shipping Weight 271 (123) 271 (123) Light Duty Commercial Gas 49

60 Polaris Commercial The quiet and efficient way to heat water. Features High grade stainless steel tank with brass connections for years of dependable service no anode required Submerged combustion chamber with spiral flue for 95-96% thermal efficiency and ultra-low standby heat loss Woven metal fibre burner of refractory steel resists corrosion, produces low NOx emissions and is resistant to thermal and mechanical shocks Uniform combustion provides excellent heat transfer Plug-and-play technology with no special adjustments at initial startup, including no adjustments or de-rating for high altitude installations PERFORMANCE Model Capacity Input 100 o F Rise Thermal Efficiency USG (L) BTU/h GPH (LPH) NATURAL GAS PC NV 34 (129) 130, (578) 96% PC NV 50 (189) 130, (576) 95% PC NV 50 (189) 175, (779) 95% PC NV 50 (189) 199, (885) 95% PROPANE PC PV 34 (129) 130, (578) 96% PC PV 50 (189) 130, (576) 95% PC PV 50 (189) 175, (779) 95% PC PV 50 (189) 199, (885) 95% 50 Polaris Commercial

61 DIMENSIONS & SHIPPING WEIGHT Model NATURAL GAS Height A Height to T&P Valve B Cold Water Inlet* C Gas Inlet D Heating System Inlet* E Heating System Outlet* F Diameter G Vent Diam. Approx. Shipping Weight in lb (kg) PC NV 48 1/2 (123) 41 (104) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 40 1/2 (103) 22 (56) (68) PC NV 62 1/2 (159) 55 (140) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 54 1/2 (138) 22 (56) (77) PC NV 62 3/4 (162) 56 1/4 (143) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 55 3/4 (142) 22 (56) (82) PC NV 62 3/4 (162) 56 1/4 (143) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 55 3/4 (142) 22 (56) (82) PROPANE PC PV 48 1/2 (123) 41 (104) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 40 1/2 (103) 22 (56) (68) PC PV 62 1/2 (159) 55 (140) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 54 1/2 (138) 22 (56) (77) PC PV 62 3/4 (162) 56 1/4 (143) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 55 3/4 (142) 22 (56) (82) PC PV 62 3/4 (162) 56 1/4 (143) 15 3/4 (40) 6 1/8 (16) 15 3/4 (40) 55 3/4 (142) 22 (56) (82) *1 NPT water connections. E D G USG C B A F Polaris Commercial 51

62 Looking for a part? Need a contractor? Submitting a warranty claim? For more information about our wide-range of products or gain access to the online: Warranty Validation - now submit claims online for quicker and more convenient processing times. Parts Catalogue - look for parts by model or serial number in our comprehensive catalogue. Contractor Locator - search for contractors in your region 52

63 Appendices

64

65 Appendices Cross-Over Matrix COMMERCIAL GAS CROSS REFERENCE CHART John Wood Commercial Old John Wood Rheem New AOS Bradford White Model # Model # Model # Model # Model # Giant JW JW G BT T-65-3N Gal. Cap. MTBU Gal. Cap. MTBU Gal. Cap. MTBU Gal. Cap. MTBU Gal. Cap. MTBU Gal. Cap. MTBU JW JW G BT T-80E-3N JWSM JWSC G BTRC D-75T-125-3N UG73-125N JWSM JW G BTRC D-75T-160-3N UG73-150N JWSM JWSC G BTRC D-80T-199-3N UG73-200N JWSM JWSC G BTRC D-80T-199-3N UG73-200N JWSM JWSC G BTRC D-80T-250-3N UG65-250N JWSM JWSC G BTRC D-100T-199-3N JWSM JWSC G BTRC D-100L-199-3N JWSC AJWSC G BTRC-275A D-100L-270-3N JWSM JWSC G BTRC D-75T-300-3N UG65-300N JWSM JWSC G BTRC D-65T-370-3N UG65-360N JWSM JWSC G BTRC D-80L-505-3N AJWSM AJWSC G A BTRC-200A AJWSM AJWSC G72-250A BTRC-251A D-80T-250-3NA AJWSM AJWSC G A BTRC-250A D-100T-250-3NA AJWSM AJWSC G A BTRC-275A D-100L-270-3NA AJWSM AJWSC G72-300A BTRC-305A D-75T-300-3NA AJWSM AJWSC G65-360A BTRC-365A D-65T-370-3NA AJWSM AJWSC G85-400A BTRC-400A D-80L-399-3NA AJWSM AJWSC G85-400A BTRC-500A D-80L-505-3NA

66 Appendices Sizing Guide Commercial Electric Water Heater Quick Sizing Guide MOTELS AND HOTELS* # of Units kw COIN OPERATED LAUNDRIES # of Units kw BEAUTY/BARBER SHOPS # of Stations kw APARTMENT BUILDINGS* # of Units kw *Sizing based on 2-3 gallon/minute shower heads and systems with circulation returns. For larger buildings consult the factory. 54

67 Appendices Sizing Guide Commercial Gas Water Heater Quick Sizing Guide MOTELS AND HOTELS* # of Units Model JWSM JWSM JWSM JWSM JWSM JWSM JWSM JWSC JWSC COIN OPERATED LAUNDRIES # of Units Model JW JWSM JWSC JWSM JWSC JWSC JWSC BEAUTY/BARBER SHOPS # of Stations Model JW JWSM JWSM JWSM JWSM APARTMENT BUILDINGS* # of Units Model JWSM JWSM JWSM JWSC JWSM JWSC *Sizing based on 2-3 gallon/minute shower heads and systems with circulation returns. For larger buildings consult the factory. 55

68 Appendices Reference Calculations and Conversions for Electricity Ohm s Law Ohm s Law defines the relationships between (P) power, (E) voltage, (I) current, and (R) resistance. One ohm is the resistance value through which one volt will maintain a current of one ampere. (I) Current is what flows on a wire or conductor like water flowing down a river. Current flows from points of high voltage to points of low voltage on the surface of a conductor. Current is measured in (A) amperes or amps. (E) Voltage is the difference in electrical potential between two points in a circuit. It s the push or pressure behind current flow through a circuit, and is measured in (V) volts. (R) Resistance determines how much current will flow through a component. Resistors are used to control voltage and current levels. A very high resistance allows a small amount of current to flow. A very low resistance allows a large amount of current to flow. Resistance is measured in ohms. (P) Power is the amount of current times the voltage level at a given point measured in wattage or watts. 56

69 One US gallon of fresh water weighs lb. Water expands 4.34% heated from 40 o to 212 o F. Appendices Reference Guide for Water Heating 1 BTU = Amount of heat required to raise the temperature of 1 lb. of water 1 o F. Recovery GPH = KW x 3412 (Electric) 8.33 x T Recovery GPH = (Gas) Input x Efficiency 8.33 x T Req. BTU Input = Water Heater Capacity x 8.33 x T % Efficiency First Hour Draw (FHD) FHD = (Storage x % Efficiency) + Recovery % of hot and cold water needed to be mixed to obtain a desired temperature Hot water percentage = Cold water percentage = M-C H-C H-M H-C Water C = Cold Water Temperature H = Hot Water Temperature M = Mixed Water Temperature % Efficiency = GPH x 8.33 x Temp. Rise BTU/Hr. Input 57

70 Appendices Reference Guide for Water Heating BTU/Output = GPH x 8.33 lbs./gal. x Temp. Rise BTU/Input = GPH x 8.33 x Temp. Rise % Efficiency KW = GPH x 8.33 x Temp. Rise 3413 Temperatures To convert from degrees Centigrade (C) to degrees Fahrenheit (F) multiply the number of degrees C by 9/5 (or 1.8) and add 32. To convert from degrees Fahrenheit (F) to degrees Centigrade (C) first subtract 32 from the number of degrees F then multiply the remainder by 5/9 (or 0.556). Gas/Oil Gas BTU 1 lb. of Butane = 21,300 1 Gal. of Butane = 102,600 1 Cu. Ft. of Butane = 3,260 1 Cu. Ft. of Manufactured = Cu. Ft. of Mixed = Cu. Ft. of Natural = 1,075 1 lb. of Propane = 21,600 1 Gal. of Propane = 91,700 1 Cu. Ft. of Propane = 2,570 58

71 Oil vs. Electric vs. Propane vs. Natural Gas Appendices Reference Guide for Water Heating Oil Electric Propane Natural Gas Formula 1 litre = 36,515 BTUs* Example Price = 60.0 /litre 1 Kilowatt Hour = 3,413 BTUs* Example Price = 10.1 /KW (kilowatt) 1 litre = 24,197 BTUs* Example Price = 63.0 /litre 1 M 3 35,310 BTUs* Example Price = 44.0 /M 3 (cubic metre)** BTUs per Unit x Efficiency Cost per Unit Example: Propane = 24,197 x 92% = BTUs per $ GST is extra on all prices. * Information supplied by The Ontario Ministry of Energy. ** This price reflects delivery charge and monthly administration charge to service your account. Formulas and Facts 1 gallon of water weighs 8.33 lbs. 1 gallon of water has a volume of 231 cubic inches 1 cubic foot of water weighs lbs. and contains 7.48 gallons of water 100 feet of 3/4 copper pipe contains 2.5 gallons of water; 1 pipe contains 4.3 gallons 8.33 BTU will raise 1 gallon of water 1 o F at 100% efficiency (electricity) 59

72 Appendices Reference Guide for Water Heating 11 BTUs are required to raise 1 gallon of water 1 o F at 70% efficiency (gas) 3,412 BTUs equal 1 kilowatt hour (KW) 1 KW will raise 410 gallons of water 1 o F at 100% efficiency 1 BTU x = watts 1 KW = 1000 watts 2.42 watts are required to raise 1 gallon of water 1 o F 1 KW will raise gallons of water 40 o F at 100% efficiency 1 KW will raise 6.8 gallons of water 60 o F at 100% efficiency 1 KW will raise 5.1 gallons of water 80 o F at 100% efficiency 1 KW will raise 4.1 gallons of water 100 o F at 100% efficiency Formula for mixing hot water M-C = Percent of hot water required to produce desired mixed temperature H-C Where M = mixed water temperature; C = cold water temperature; H = hot water temperature For example: How much of a shower is hot water and how much is cold water? My shower temperature is 105 o F, my water heater thermostat is set on 120 o F and the cold water inlet temperature is 50 o F = = 70 = 79% of the shower is 120 o hot water This formula for mixing hot water is important when explaining a NOT ENOUGH HOT WATER trouble call and the water heater is functioning properly. 60

73 Appendices Reference Guide for Water Heating ELECTRIC GAS Energy Costs: KW x fuel costs = energy costs Energy Costs: Cubic feet x fuel costs = energy costs 100 x 0.05 = $ x 0.75 = $7.50 To obtain gallons per hour (GPH) recovery WATTS 2.42 x (temp rise o F) To obtain gallons per hour (GPH) recovery HOURLY INPUT (BTUs) 11.0 x (temp rise o F) I have a 30-gallon electric heater, non-simultaneous operation, 4,500 watt elements. What is the recovery GPH if my cold water is 40 o F and my thermostat is set to 120 o F? 4,500 = 23 gallons per hour 2.42 x 80 I have a 30-gallon gas heater, rated at 40,000 BTUs. What is the recovery GPH if my cold water is 40 o F and my thermostat is set to 120 o F? 40,000 = 45 gallons per hour 11.0 x 80 Temperature Rise ( o F) WATTS 2.42 x GPH Temperature Rise ( o F) HOURLY INPUT (BTUs) 11.0 x GPH I have a 30-gallon electric heater, non-simultaneous operation, 4,500 watt elements. What is the maximum temperature rise if the heater can recover 23 gallons per hour? 4,500 = 80 o temp 2.42 x 23 rise I have a 30-gallon gas heater, rated at 40,000 BTUs. What is the maximum temperature rise if the heater can recover 45 gallons per hour? 40,000 = 80 o temp 11.0 x 45 rise 61

74 Appendices Reference Guide for Water Heating Oil BTU 1 Gal. #1 Fuel = 136,000 1 Gal. #2 Fuel = 138,500 1 Gal. #3 Fuel = 141,000 1 Gal. #5 Fuel = 148,500 1 Gal. #6 Fuel = 152,000 1 lb. of Gas = 28 Water Column 1 lb. of Gas = 16 oz. 100 Cu. Ft. = 1 therm. Conversions Multiply By To Obtain BTU/HR W Ft m Ft./min., fpm m/s Ft m 2 Ft m 3 Gallon (U.S. 231 in 3 ) 3.79 L Gallon m 3 Horsepower (boiler) 9.81 KW Inch 25.4 mm Mile 1.61 km Pound lb. (mass) kg Psi 6.89 kpa 62

75 Appendices Exclusive Designs, Built-to-Last John Wood Water Heaters are designed and built with features to ensure maximum quality, safety and reliability. Our heaters are thoroughly factory tested, field-proven and meet or exceed industry standards. TankSaver The exclusive TankSaver design prolongs tank life. TankSaver impedes corrosion by guarding metal tank openings from exposure to water and keeping them watertight. The durable construction virtually eliminates rust. American Society of Mechanical Engineers (ASME) Our facilities are authorized by ASME to build tanks in accordance with the ASME Boiler and Pressure Vessel Code. ASHRAE Efficiency Standard John Wood commercial water heaters meet the ASHRAE Efficiency Standard The burner efficiency of these units is over 80%. Certified Hydrostatic Tests Design test pressure psi. Maximum working pressure psi. NRCan Standard All John Wood residential water heaters meet or exceed NRCan energy efficiency standards. Coast-to-Coast Service & Support In order to bring you unsurpassed quality and reliability after you ve purchased a John Wood product, we ve created a number of service and support resources to help take you through installation and beyond. Operating hours are 8:00 a.m. to 6:00 p.m. EST for our Technical Support call centre ( ), which is staffed by technical experts who provide in-depth product support and troubleshooting advice. We offer a wide-range of hands-on training programs from basic refresher courses to product-specific programs. Our spare parts inventory carries a comprehensive supply of parts to help make repairs fast and easy. 63

76 Notes 64

77 Notes 65

78 Notes 66

79 Warranty 1. Warranty terms are set out on the warranty certificate enclosed with each unit. 2. Warranty replacements are issued only in the case where a John Wood heater is used to replace an approved John Wood warranty claim. Type Inner Tank Parts Residential Water Heaters - Gas and Electric 8 years 6 years SpaceSaver Models (except SS025 5 years) 6 years 1 year Storage Boosters 5 years 1 year Residential Oil Fired* 6 years 1 year (excludes burner) Commercial Water Heaters 3 years 1 year Insulated Commercial Storage Tanks 5 years 1 year Bare Commercial Storage Tanks 1 year N/A Range Boilers 1 year N/A Commercial Polaris 3 years 1 year Residential Polaris 10 years 1 year Tankless Residential 15 years 5 years Tankless Commercial 10 years 5 years Envirosense TM Models 6 years 6 years *Oil burners are guaranteed by burner manufacturer.

80 Head Office: 599 Hill Street West Fergus, ON N1M 2X1 Tel.: Fax: Technical Service & Warranty: Tel.: Sales & Customer Service: Tel.: