EURADH th European Adhesion Conference. Final Program. Organised by: In cooperation with: April Alicante - Spain
|
|
|
- Preston McCarthy
- 9 years ago
- Views:
Transcription
1 EURADH th European Adhesion Conference 2014 Final Program Organised by: In cooperation with: April Alicante - Spain
2 TABLE OF CONTENTS WELCOME ADDRESS III COMMITTEES /PLENARY SPEAKERS V PROGRAM AT A GLANCE VII LECTURE PROGRAM XI POSTER PROGRAM XXIX SOCIAL PROGRAM XXXV GENERAL INFORMATION XXXVI EXHIBITORS / EXPONSORS XXXVII i
3 ii
4 WELCOME ADDRESS The Spanish Adhesion Society is proud of organizing the 10 th European Conference on Adhesion EURADH 2014 in the beautiful sea shore area of Alicante. The organizers welcomed all you to this event, the first International Adhesion Conference held in Spain The interesting program will contribute to the advance of the Adhesion Science and will create the best atmosphere for the adequate interchange of new ideas favouring the open discussion and interaction among the participants. We hope that all you enjoyed the beautiful location of the conference, the Spanish hospitality and the great Science derived from the Conference talks. Our thanks to the members of the Scientific Committee, the members of the Organizing Committee, the sponsors and exhibitors, and all participants for making EURADH 2014 a reality! Alicante (Spain) - 22 nd April 2014 José Miguel Martín-Martínez Juan Carlos Suárez-Bermejo Conference chairmen iii
5 iv
6 COMMITTEES / PLENARY SPEAKERS CHAIRMEN José Miguel Martín-Martínez. University of Alicante/E Juan Carlos Súarez-Bermejo. Technical University of Madrid/E SCIENTIFIC COMMITTEE J.M. Arenas-Reina. Technical University of Madrid/E J. Bishopp. Star Adhesion Limited/UK J.C. Bordado. Technical University of Lisbon/P J.F. Chailan. Université du Sud-Toulon Var/F L.M.F. Da Silva. University of Port /P M.L. González-Martín. University of Extremadura/E M. Grunze. University of Heidelberg/D A. Hartwig. Fraunhofer IFAM/D W. Possart. Saarland University/D F. Restagno. CNRS. Université Paris-Sud/F S. Shaw. Defence Science & Technology Laboratory/UK ORGANISING COMMITTEE J.M. Martín-Martínez. University of Alicante/E J.C. Suárez-Bermejo. Technical University of Madrid/E S. Martín-Rey. Technical University of Valencia/E P. Pinilla-Cea. Technical University of Madrid/E PLENARY SPEAKERS A.J. Kinloch. Imperial College/UK A. Rosenhahn. Ruhr-University Bochum/D E. Drockenmuller. University of Lyon/F v
7 vi
8 PROGRAM AT A GLANCE TUESDAY, 22 APRIL 18:00-20:00 Registration Welcome Reception 07:45-08:45 08:45-09:15 09:15-10:00 EPOXY ADHESIVES MECHANICS OF ADHESIVE JOINTS (I) Chairman : A. Hartwig Chairman : L.F.M. da Silva 10:00-10:15 2/R D Adams 725/Nicolas Stein 10:15-10:30 729/Matthias Goessi 736/Ophélie Devaux 10:30-10:45 762/Andre Arnebold 743/Mariana Banea 10:45-11:00 712/F Poncin-Epaillard 748/Ludovic Krogh 11:00-11:15 818/Léo Depollier 754/Uwe Rietz 11:15-11:30 826/So-Jeong Lee 749/Uwe Beck 11:15-11:45 ADHESIVES AND CHEMISTRY AGEING AND FATIGUE (I) Chairman : J.C. Bordado Chairman : C. Sato 11:45-12:00 855/Akio Takemura 652/Benedikt Dippel 12:00-12:15 805/Gregor Wisner 710/Florian Goldschmidt 12:15-12:30 812/Zenichi Miyagi 733/Vivien Reuscher 12:30-12:45 738/B Leitner 750/J.E. Huacuja Sanchez 12:45-13:00 360/Dirk Wulff 759/N. Arnaud 13:00-13:15 803/María Alejandra Moyano 781/Adam Voelkel 13:15-13:30 661/Rosa Sebastian 802/Ruben Friedland 13:30-13:45 856/Kostyuk A. 768/Milan Sernek 13:45-15:15 WEDNESDAY, 23 APRIL Registration OPENING SESSION "20 years of Adhesion science in Europe : A retrospective from the pioneers" Chairman: J.M. Martín-Martínez PLENARY LECTURE (A. Kinloch ) COFFEE BREAK LUNCH 15:15-16:30 Poster Discussion 16:30-16:45 COFFEE BREAK vii
9 PROGRAM AT A GLANCE SURFACE TREATMENT (I) INDUSTRIAL CHALLENGES Chairman : K. Grundke Chairman : S. Shaw A. Takemura 16:45-17:00 389/J. Holtmannspötter 742/Hartwig 17:00-17:15 765/Alfano 731/Jan Olaf Schulenburg 17:15-17:30 796/Uwe Specht 773/Ch. Tornow 17:30-17:45 769/Schafer 700/Gary Critchlow 17:45-18:00 730/Hitoshi Kanazawa 800/Andrea Glawe 18:00-18:15 721/Jean Pierre Jeandrau 804/Iris Käppler 18:15-18:30 809/Alfonso Cortés 18:30-18:45 825/Carlos Gracia 18:45-19:00 755/Fabio Chiozza 19:00-19:15 361/Kelch Steffen 19:15-19:30 695/Hyun- Joong Kim 19:30-19:45 862/Marisa Gómez THURSDAY, 24 APRIL Chairman : W. Possart 08:30-09:15 PLENARY LECTURE (A. Rosenhahn ) BIOADHESION: Prevention and Simulation MECHANICS OF ADHESIVE JOINTS (II) Chairman : M.L. González-Martín Chairman : J.C. Súarez-Bermejo 09:30-09:45 831/Moulay Sadiki 757/Julian Felger 09:45-10:00 836/Barkai Hassan 763/R.J.C. Carbas 10:00-10:15 720/Daniel Ruiz-Molina 810/Cristina Alia 10:15-10:30 358/Frederic Guittard 784/Nicolas Carrere 10:30-10:45 853/Miguel A. Cabrerizo-Vílchez 788/Y. Sekiguchi 10:45-11:00 858/Bordado 821/Chiaki Sato 11:00-11:15 822/Wulf Possart 11:15-11:45 DYNAMIC ADHESION SURFACE TREATMENT (II) Chairman : M. A. Cabrerizo-Vílchez Chairman : F. Poncin-Epaillard 11:45-12:00 752/Manuel Schiel 780/Gavin Creech 12:00-12:15 827/Frederic Restagno 785/Maribel Butrón-García 12:15-12:30 828/ Hector Alarcón 838/Karina Grundke 12:30-12:45 829/Manfred Stamm 777/Andrés J. Yáñez-Pacios ADHESION IN DENTISTRY Chairman : H. Marghalani 12:45-13:00 830/A. Synytska 702/Manuel Toledano 13:00-13:15 692/Stefan Wellert 704/Raquel Osorio 13:15-13:30 815/Iulian Antoniac 13:30-15:00 COFFEE BREAK LUNCH viii
10 PROGRAM AT A GLANCE 16:30-23:00 Visit to "Huerto del Cura" palm Garden/Outlet shoping and Conference Dinner FRIDAY, 25 APRIL Chairman : I. Antoniac 09:00-09:45 PLENARY LECTURE (E. Drockenmuller ) MECHANICS OF ADHESIVE JOINTS (III) FUNDAMENTAL ADHESION (I) Chairman : R.D. Adams Chairman : F. Restagno 10:00-10:15 756/Pierre Bidaud 650/Christophe Nies 10:15-10:30 844/Mario Cabello 658/Marieke Füllbrandt 10:30-10:45 726/Ulrich Schwarz 699/Frank Fug 10:45-11:00 790/U. Rabe 740/Thomas Willers 11:00-11:15 854/Miguel A. Cabrerizo-Vílchez 11:15-11:45 COFFEE BREAK MECHANICS OF ADHESIVE JOINTS (IV) FUNDAMENTAL ADHESION (II) Chairman : G. Critchlow Chairman : M. Stamm 11:45-12:00 798/C. Gnoth 758/Jonas Paul 12:00-12:15 816/Simon Aicher 746/Florian Heib 12:15-12:30 775/Emiliano Lepore 744/Beata Strzemiecka 12:30-12:45 745/Michael Schmitt 12:45-13:00 Closing of the Congress ix
11 x
12 LECTURE PROGRAM WEDNESDAY, 23 APRIL 2014 SALÓN MEDITERRÁNEO 8:45 OPENING SESSION "20 years of Adhesion Science in Europe : A retrospective from the pioneers" PLENARY LECTURE: A.J. Kinloch, F.J. Guild, K. Masania, A.C. Taylor, S. Sprenger. The Toughness of nano-modified epoxy resins... Page 3 SALÓN TERRA LUCIS 10:00 11:30 EPOXY ADHESIVES 2 R.D. Adams. The influence of cure dynamics on the physical properties of thermosetting epoxy adhesives. Page Matthias Goessi. Toughened epoxy adhesives: Phase analysis and mechanical properties... Page Andre Arnebold, Andreas Hartwig. Morphological and mechanical investigation on partially crystalline epoxy resin.... Page F. Poncin-Epaillard, Patrice Glaris, Michel Dorget, Jean François Coulon. Chemical and topographical surface modifications of epoxy resin for low adhesive composite mould... Page 15 xi
13 LECTURE PROGRAM 818 Léo Depollier, Cynthia Bach, Matthieu Gsell, Wulff Possart, Florian Goldschmidt, Stefan Diebels. Water diffusion in different epoxies at different temperatures. Page So-Jeong Lee, Jong-Dae Lee, Jong-Deok Seo, Sang-Hyun Doh, Jun-Ki Kim. Study on the mechanical properties of cured epoxy adhesive affecting the shock transfer behavior for car body assembly Page 19 SALON MEDITERRÁNEO 10:00 11:30 MECHANICS OF ADHESIVE JOINTS (I) 725 Nicolas Stein, Philipp Weißgraeber, Wilfried Becker. Analysis of adhesive joints containing cracks in the adhesive layer.. Page Ophélie Devaux, Jean-Yves Cognard, Romain Créac hcadec, Florian Lavelle. Effect of curing degree on the mechanical behavior of the adhesive Hysol EA Page Mariana Banea, Lucas F. M. da Silva, Ricardo J. C Carbas, Raul D.S.G Campilho. Characterization of a structural polyurethane adhesive modified with thermally expandable particles. Page Ludovic Krogh, Adrien Schmitt, Wulff Possart. Interrelation between viscoelastic functions of adhesive joints.. Page Uwe Rietz, Dietmar Lerche, Uwe Beck, Stefan Hielscher, Janine Kern. Determination of bonding, adhesive and composite strength by means of centrifuge technology.... Page 24 xii
14 LECTURE PROGRAM 749 Uwe Beck, Gundula Hidde, Stefan Hielscher, Thorid Lange, Renate Mix. Multiple-sample approach: Reliable ranking and validated statistics of bonding and adhesive strength. Page 26 11:30-11:45 COFFE BREAK SALÓN TERRA LUCIS 11:45 13:45 ADHESIVES AND CHEMISTRY 855 Zhigang Ling, Naruhito Hori, Tadahisa Iwata, Akio Takemura. The insitu adhesive layer chemical analysis of aqueous API adhesive... Page Gregor Wisner, Elisabeth Stammen, Fabian Fischer, Klaus Dilger, Andreas Zillessen, Maria Brodel. Accelerated adhesive bonding of wood panels for prefab houses.. Page Zenichi Miyagi, Kyohei Hasebe, Masami Hosino. Shear phenomena based on static visco-elastic properties in micro shear test for pressure sensitive adhesive. Page Bernhard Leitner, Benward Schönteich, Jens Holtmannspötter. Ultrasonic assisted mixing of high viscosity 2-component adhesives.. Page 32 xiii
15 LECTURE PROGRAM 360 Dirk Wulff, Matthias Gerst, Heinrich Harrer, Markus Rückel. Advanced polymer design for adhesive tapes. Page M. Alejandra Moyano, José Miguel Martín-Martínez. Comparative properties of EBA and EVA based hot melts containing tackifiers of different nature... Page Lewis M. Broomfield, Rosa M. Sebastián, Jordi Marquet, Rainer Schönfeld. Ambient temperature polymerization of oxiranes initiated by MSbF 6 /H 2 O.. Page A. Kostyuk, V. Ignatenko, M. Smirnova, S. Antonov, Brantseva Tatiana, S. Ilyin. Rheology and adhesive properties of filled PIB-based pressure-sensitive adhesives. Page 38 SALON MEDITERRÁNEO 11:45 13:45 AGEING AND FATIGUE (I) 652 Benedikt Dippel, Michael Johlitz. Modelling of a bondings chemical ageing behaviour including a reactive adherent-adhesive interphase Page Florian Goldschmidt, Stefan Diebels. Modeling inhomogeneous material properties in adhesive bonds in consideration of environmental influences.. Page Vivien Reuscher, Bilgekaan Avcil, Rico Bauer, Markus Jordan, Michael Guyenot, Bernd Mayer. Ageing of polymer-based coatings in aggressive media... Page 44 xiv
16 LECTURE PROGRAM 750 J. Ernesto Huacuja-Sánchez, Pascal Klein, Daniel Schäfer, Wulff Possart. Ageing in polyurethane-steel adhesive joints: Water immersion. Page Nicolas Arnaud, Romain Créac hcade, Jean-Yves Cognard, Peter Davies. Strategies to identify the moisture effect on the mechanical behaviour of an adhesively bonded joint under multi-axial loads.. Page Adam Voelkel, Beata Strzemiecka, Janina Zięba-Palus, Tomasz Lachowicz. Aging of the adhesives and the influence of this phenomenon on the mechanical properties of final products.. Page Ruben Friedland, Paul Ludwig Geiß, Léo Depollier, Wulff Possart, Udo Netzelmann, Ute Rabe, Sigrun Hisekorn. Aging of adhesively bonded joints under exposure to combined climatic and mechanical.. Page Milan Sernek, Maksimilijan Mravljak. Influence of moisture content and orientation of wood fibres on the adhesion between wood and steel Page 53 13:45-15:15 LUNCH xv
17 LECTURE PROGRAM SALON ALMIRANTE 15:15-16:30 POSTER DISCUSSION 16:30-16:45 COFFE BREAK SALÓN TERRA LUCIS 16:45 18:45 SURFACE TREATMENT (I) 389 Jens Holtmannspötter, Timo Hofmann, Jürgen von Czarnecki. The combined use of peel-ply and plasma - a reliable method for structural adhesive bonding of carbon fiber reinforced plastics?.. Page Marco Alfano, Stefano Pini, Giovanni Chiodo, Alessandro Pirondi, Franco Furgiuele, Roberto Groppetti. Low-power laser ablation for the enhancement adhesive bonding strength of metals substrates... Page Uwe Specht, Jörg Ihde, Karsten Thiel, Bernd Mayer. Self-assembled nanostructures on titanium surfaces by Nd:YAG-laser treatment for durable adhesion... Page Jan Schäfer, Jens Holtmannspötter, Michael Frauenhofer, Timo Hofmann, Jurgen von Czarnecki, Hans-Joachim Gudladt. Atmospheric pressure plasma jet treatment for structural adhesive bonding of thermoplastic composites.. Page 61 xvi
18 LECTURE PROGRAM 730 Hitoshi Kanazawa, Aya Inada. Improvement in the adhesion property and ink-jet printing of silicone rubber, PET films and other polymeric materials. Page Kaoutar Benoualy, Jean-Pierre Jeandrau. Evaluation of the durability of new "eco-efficient and REACH compliant" surface pre-treatments on metallic substrates prior to adhesive bonding..... Page 67 SALON MEDITERRÁNEO 16:45 19:45 INDUSTRIAL CHALLENGES 742 Andreas Hartwig, Andreas Lühring, Manfred Peschka, Matthias Popp. Pre-Applicable Structural Adhesives (PASA ) Adhesives chemistry for new assembling concepts.. Page Jan Olaf Schulenburg, Christoph Mayer, David Hofstetter. Testing of toughened 2C epoxy adhesives for automotive and wind applications... Page Christian Tornow, Kai Brune, Mareike Schlag, Michael Hoffmann, Dorothea Stübing, Stefan Dieckhoff. Quality assurance concepts for adhesive bonding of composite aircraft structures - Characterisation of adherend surfaces by extended NDT..... Page 72 xvii
19 LECTURE PROGRAM 700 Gary Critchlow. Replacements for hexavalent chromium containing prebond processes: A UK Aerospace consortium perspective Page Andrea Glawe. From low to high viscose Selection of the optimal coating technology for hotmelt application.. Page Iris Käppler, Ayham Younes, Georg Bardl, Oliver Döbrich, Paul Matthäi, Chokri Cherif. Non-Crimp fabric of the next generation A novel production technology.... Page Alfonso Cortés Izurdiaga, Lourdes Sánchez Bajo, Ana de la Cruz González, Diego Martínez Cruz. Dimensioning of anchors for natural stone tiles based on epoxy acrylate adhesives.. Page Carlos Gracia Fernandez, David Dávila. Characterization of pressure sensitive adhesives by rheology... Page Fabio Chiozza, Fabrizio Toniolo, Benedetto Pizzo. Limits and innovation in Poly(vinyl acetate) water resistant D3 glues... Page Urs Burckhardt, Fabien Choffat, Tristan Corbière, Steffen Kelch. Recycling of polyurethane adhesive residues.. Page Hyun-Joong Kim. Breakthrough of OCA for the Next Generation Display - The Challenge of the new OCA.. Page Rodrigo Paris, Marisa Gómez, María Alejandra Moyano, José Miguel Martín-Martínez. Improved performance of EVA hot-melts by adding EBA or low density polyethylene.... Page 85 xviii
20 LECTURE PROGRAM THURSDAY, 24 APRIL 2014 SALON MEDITERRÁNEO 8:30 PLENARY LECTURE: A. Rosenhahn. Surface selection and settlement of marine biofouling organisms.. Page 4 SALÓN TERRA LUCIS 9:30 11:15 BIOADHESION: PREVENTION AND SIMULATION 831 Moulay Sadiki, Hassan Barkai, Soumya Elabed, Abdelah Farah, Saad Ibnsouda Koraichi. The anti-adhesive effect of plants extracts against fungi wood.. Page Barkai Hassan, Sadiki Moulay, El abed Soumya, Ibnsouda Koraichi Saad. Study of the impact of the adhesion of Penicilliumexpansum on physico-chemical properties of cedar wood using of angle contact. Page Javier Saiz-Poseu, Beatriz García, Josep Sedó, Jordi Hernando, Felix Busqué, Daniel Ruiz-Molina. Bioinspired catechol-based coatings and sticky nanoparticles.... Page 89 xix
21 LECTURE PROGRAM 358 Frederic Guittard, T. Darmanin, E. Taffin de Givenchy, S. Amigoni. Build-up superhydrophobic properties from bio-inspired surfaces.... Page Alda Yadira Sánchez-Treviño, Miguel Ángel Fernández-Rodríguez, Miguel Ángel Rodríguez-Valverde and Miguel Ángel Cabrerizo-Vílchez. Chemical patterning of commercially pure Titanium surfaces based on organophosphonates. Page Ana Paula Duarte, Maria Teresa Cidade, Jorge Fernando Coelho, João Carlos Bordado. Development of a new urethane based adhesive... Page 94 SALON MEDITERRÁNEO 9:30 11:15 MECHANICS OF ADHESIVE JOINTS (II) 757 Julian Felger, Philipp Weißgraeber, Wilfried Becker. Effect of unsupported adherend length on failure load of single lap joints Page Ricardo J. Camilo Carbas, Guilherme Miranda Silva de Oliveira Viana, Lucas Filipe Martins da Silva, Gary William Critchlow. Functionally graded adhesive patch repairs in civil applications Page Cristina Alia-García, José A. Jofre-Reche, José Miguel Martín- Martínez, Juan C. Suárez-Bermejo, José M. Arenas-Reina. Structure changes induced by thermal post-curing of vinyl ester adhesive. Page Nicolas Carrere, Dominique Leguillon, Jean Yves Cognard. Effect of geometrical parameters on the 3D stress state of adhesively bonded scarf joints under elastic assumptions... Page 101 xx
22 LECTURE PROGRAM 788 Yu Sekiguchi, Kazuyoshi Seto, Hiroshi Suto, Hayato Miyazaiki, Kosuke Haraga, Chiaki Sato. Analytical prediction of bending stiffness of honeycomb sandwich panels bonded adhesively.. Page Chiaki Sato, Hiroki Hattori. Absorbed energy by adhesive layer subjected to multi-mode high rate loading.. Page Julien Jumel, Wulff Possart, Martin E. R. Shanahan. Experimental investigation of cohesive stresses redistribution during constant force single cantilever beam test. Page :15-11:45 COFFE BREAK xxi
23 LECTURE PROGRAM SALÓN TERRA LUCIS 11:45 13:15 DYNAMIC ADHESION 752 Manuel Schiel, Joachim Kahrs, Elisabeth Stammen, Klaus Dilger. Determination of cure-dependent properties by rheological and dynamic mechanical analysis Page Alexis Chennevière, Kenneth R. Shull, Fabrice Cousin, Frédéric Restagno, Liliane Léger. Interdigitation dynamics of PS end-tethered polymer chains and slip at interfaces Page Hector Alarcon, Léo Garcia, Frédéric Restagno, Liliane Léger. Polymer solutions at interfaces. Page Manfred Stamm, Petra Uhlmann, Eva Bittrich. Polymer brush coatings for control of protein adhesion... Page Alla Synytska, Manfred Stamm, Ekaterina Bieling, Alina Kirillova. Biocompatible functional materials with switchable and adaptive adhesion properties Page Salomé Vargas Ruiz, Christoph Schulreich, Martin Jung, André Richardt, Thomas Hellweg, Stefan Wellert. Decontamination of hydrophobic solid surfaces by environmentally friendly microemulsion systems.. Page 114 xxii
24 LECTURE PROGRAM SALON MEDITERRÁNEO 11:45 12:45 SURFACE TREATMENT (II) 780 Gavin Creech, Dean Bugg, Heather Puddephatt, Victoire Bresset. Evaluation of primer-less methyl-methacrylate adhesive technology and surface treatments for adhesion promotion. Page Maribel Butrón-García, José A. Jofre-Reche, José Miguel Martín- Martínez. Optimization of hydrophobic recovery of PDMS by treatment with low pressure plasmas made with different mixtures of argon and oxygen. Page Karina Grundke, Kathrin Estel, Anne Marschner, Betina Joos-Müller, Andrea Stoll. Surface characterization and comparison of surface pretreated thermoplastic polyolefins Relevance to adhesion for waterborne paints. Page Andrés J. Yáñez-Pacios, José Miguel Martín-Martínez. Incidence of wood content on the surface modifications and adhesion of wood plastic composites (WPCs) treated with oxygen/argon low pressure plasma.. Page 120 xxiii
25 LECTURE PROGRAM SALON MEDITERRÁNEO 12:45 13:30 ADHESION IN DENTISTRY 702 Manuel Toledano, Raquel Osorio. Surface microanalysis and chemical imaging of early dentin remineralization.. Page Raquel Osorio, Manuel Toledano. Zinc promotes hydroxylapatite and scholzite formation in dentin... Page Iulian Antoniac, Marian Miculescu, Gabriel Furtos, Florin Miculescu, Aurora Antoniac. Adhesion and bonding strength evaluation of some metal-ceramic couples used in dentistry.... Page :30-15:00 16:30-23:00 LUNCH Visit to "Huerto del Cura" palm Garden/Outlet shopping Conference Dinner xxiv
26 LECTURE PROGRAM FRIDAY, 25 APRIL 2014 SALON MEDITERRÁNEO 9:00 PLENARY LECTURE: E. Drockenmuller. Robust, orthogonal and efficient macromolecular engineering for the control of surface properties.... Page 5 SALÓN TERRA LUCIS 10:00 11:15 MECHANICS OF ADHESIVE JOINTS (III) 756 Pierre Bidaud, Romain Créac hcadec, David Thevenet, Jean-Yves Cognard, Pierre Jousset. A prediction method of the cyclic behaviour of adhesively bonded structures under fatigue loading Page Mario Cabello, Mikel Zabala, Aitor Cenitagoya, Jordi Renart, Javier Zurbitu, Albert Turon. A comparative study on the applicability of existing analytical models to predict failure of flexible adhesives joints. Page Ulrich Schwarz, Christoph Winkler. Production control of bond strength in non - load bearing timber elements.... Page Ute Rabe, Udo Netzelmann, Sigrun Hirsekorn, Ruben Friedland, Paul Ludwig Geiß, Leo Depoiller, Wulff Possart. Ultrasonic testing of adhesive layers exposed to complex mechanical and environmental loads.page 132 xxv
27 LECTURE PROGRAM SALON MEDITERRÁNEO 10:00 11:15 FUNDAMENTAL ADHESION (I) 650 Christophe Nies, Jannik Summa, Helga Kraemer-Lucas, Dirk J. Dijkstra, Wulff Possart. Formation of the interphase polyurethane native metals: adsorption studies.. Page Marieke Füllbrandt, Dikran Kesal, Regine von Klitzing. Work of adhesion between metals and polymers on a macro- and microscopic scale.. Page Frank Fug, Adrien Petry, Hendrik Jost, Wulff Possart. Adhesion of polyurethane monomers on native metals: Adsorption from the gas phase..... Page Thomas Willers, Ming-Jin. Why test inks cannot tell the full truth about surface free energy.... Page Felipe Guerrero-Barba, Jesús Enrique Arellano-Varela, Miguel Ángel Rodríguez-Valverde, Miguel Ángel Cabrerizo-Vílchez. Naphthenic bitumencalcite aggregate wettability at high temperature.. Page :15-11:45 COFFE BREAK xxvi
28 LECTURE PROGRAM SALÓN TERRA LUCIS 11:45 12:45 MECHANICS OF ADHESIVE JOINTS (IV) 798 Christian Gnoth, Richard Grothe, Guido Grundmeier. Analysis of the de-adhesion of adhesives from zinc coated steel under combined mechanical and corrosive load stresses. Page Simon Aicher, Gordian Stapf. Fatigue in bonds of structural glued elements... Page Emiliano Lepore, Federico Bosia, Nicola Pugno. An optimal angle for double, multiple and hierarchical peeled adhesive tapes. Page 148 xxvii
29 LECTURE PROGRAM SALON MEDITERRÁNEO 11:45 12:45 FUNDAMENTAL ADHESION (II) 758 Jonas Paul, Stefan Romeis, Christian Meltzer, Björn Braunschweig, Wolfgang Peukert. Adhesion and friction mechanisms of single microspheres on self-assembled monolayers Page Florian Heib, Rolf Hempelmann, Katja Groß, Michael Schmitt. Introduction in the statistical evaluation of dynamic contact angles by using high-precision drop shape analysis.. Page Beata Strzemiecka, Adam Voelkel. Influence of the adhesion on the mechanical properties of final products in complex polymer systems. Page Michael Schmitt, Katja Groß, Florian Heib, Rolf Hempelmann. High precision drop shape analysis (HPDSA) on inclining flat surfaces: Introduction and comparison of this special method with commercial contact angle analysis Page 156 xxviii
30 POSTER PROGRAM SALÓN ALMIRANTE Poster Discussion: Wednesday, 23 April 15:15-16:30 Mechanics of adhesive joints Cristina Alía, Paz Pinilla, José Manuel Arenas, Juan Carlos Suárez- Cohesive laws in structural adhesives related to long term degradation tests.... Page Paz Pinilla, Santiago Miguel, Francisco López, Juan Carlos Suárez- Molecular Dynamics modelling of conformational changes in polymer to metal bonds... Page Raul D.S.G Campilho, Mariana D. Banea, Lucas F.M. da Silva - Modelling adhesive joints at high temperatures by the extended Finite Element Method..... Page Huang Ming Chong, Ambrose C. Taylor - The fracture performance of hybrid silica nanoparticle/block copolymer-modified epoxy polymers.. Page Torsten Geipel, Ulrich Eitner - Thermo-oxidative aging of an electrically conductive adhesive for photovoltaic applications... Page Yu Sekiguchi, Shigeki Saito, Kunio Takahashi, Chiaki Sato - Discussion on possibility of adhesion force control using adhesional elastic beams.. Page Julien Jumel, Wulff Possart, Martin E. R. Shanahan- Elastic and viscoelastic analysis of the single-cantilever beam test Page Francisco Javier Juanes, José Carlos Míguez, Ángel Valea, Elena Bilbao- Study of the debonding process of a transparent adhesive joint using image analysis.. Page Jong-Dae Lee, So-Jeong Lee, Jong-Deok Seo, Chang-Yong Lim, Jun-Ki Kim - Failure mechanism of the weld-bonded joints of ultra high strength steel for car body assembly. Page 173 xxix
31 POSTER PROGRAM Adhesion improvement and surface treatment Ahmed Abou-Kandil, Nabila Darwish, Adel Shehata, Samir Lawandy, Anhar Awad, Basma Saleh - Promoting adhesion of natural rubber to brass plated steel cords.. Page Gyung Soo Jeon- On characterizing microscopically the adhesion interphase for the adhesion between brass-plated steel cords with different Cu content and rubber compound.. Page Beatriz Cantos-Delegido, José Miguel Martín-Martínez- Adhesion improvement of vulcanized rubber containing noticeable amount of processing oils by treatment with low pressure plasma with different shelves configuration in the reactor chamber Page Gaelle M. Roger, Mai Trang Nguyen - Surface treatments for adhesive bonding of composite materials.... Page Hitoshi Kanazawa, Aya Inada - Improvement in the adhesion property of CFRP materials and the water-based paint coating and ink-jet printing of silicone rubber, PP and PET films.... Page B. Weller, C. Kothe, J. Wünsch- The stability of surface pretreatments on different stainless steels... Page 183 xxx
32 POSTER PROGRAM Adhesives Leo Depollier, Bettina Zimmer, Ruben Friedland, Paul Ludwig Geiß, Wulff Possart - Chemical ageing in epoxy-stainless-steel joints with and without mechanical load..... Page Celia Guillem López, Vicente Forrat Pérez, Corneliu Hamciuc, Diana Serbezeanu, Ionela-Daniela Carja, Tachita Vlad-Bubulac, Valentina-Elena Musteata - New epoxy resins containing DOPO units and polydimethylsiloxane segments. Assessment of their flame retardant properties. Page Andre Arnebold, Oliver Schorsch, Jens Beckmann, Andreas Hartwig- Toughening of a cycloaliphatic epoxy resin by a silicone and novolak releasing twin monomer... Page Juan Llorens-Esteve, Fernanda César-Dos Santos, José A. Jofre- Reche, Ignacio Martínez-Soler, José Miguel Martín-Martínez - Effect of the formulation of epoxy adhesives for natural stone consolidation in their ageing resistance under water... Page Lourdes Sánchez Bajo, Antonio Romerosa Nievas- Synthesis of Zinc nanoparticules into epoxy resin matrix. Page Franziska Wehnert, Maurice Langer, Jörg Kaspar, Irene Jansen - The contribution of nanoparticles towards multifunctionality within adhesives Page Mohammed A. Bahattab, Vanesa García-Pacios, Jessica Donate-Robles, José Miguel Martín-Martínez - Effect of fumed silica addition on polyurethane adhesives properties. Page J. Ernesto Huacuja-Sánchez, Katrin Müller, Philipp Engel, Wulff Possart - Water diffusion in polyurethane at different conditions..... Page Robert Hernández Aguirres-Arobe, María José Fernandez- Berridi, Lourdes Irusta - Synthesis of photoresponsive waterborne polyurethane coatings with coumarin groups Page Gabriel Estan-Cerezo, José Miguel Martín-Martínez - Polymerization of ethyl cyanoacrylate adhesive with triethylamine at different temperatures Page 204 xxxi
33 POSTER PROGRAM Ana Mª Villarreal-Gómez, Manuel Martínez-Paino, José Miguel Martín-Martínez - Comparative properties of cyanoacrylate adhesives with different alkyl chain length before and after polymerization... Page Wei Zhang, Jian-zhang Li, Chun-peng Wang, Fuxiang Chu - Utilization of biorefinery residues modified phenolformaldehyde resin for use as plywood adhesive.. Page Renata F. R. Freitas, Cátia Klein, Rosane A. Ligabue, Marcus Seferin, Sandra Einloft - Evaluation of dimer fatty acid composition in thermal and mechanical properties of hot melt polyamide.. Page Ludovic Krogh, Jürgen E. K. Schawe, Wulff Possart - Viscoelastic properties of ultra-thin adhesive joints a dynamic mechanical analysis approach. Page 211 Industrial challenges Gregor Wisner, Elisabeth Stammen, Fabian Fischer, Klaus Dilger, André Spiekermeier, Sven Hübner, Bernd-Arno Behrens- Adhesively bonded blanks for flexible and increased reinforcement. Page Joan Arley Ortega, Daniel H. Builes, Jhon Wilson Peláez - PSA scale-up of functional properties from lab production to industrial plant: From monomers to label Page 214 xxxii
34 POSTER PROGRAM Adhesion in Cultural Heritage Susana Martin-Rey, María Castell-Agustí, Vicente Guerola- Blay, Cristina Robles-de la Cruz - Natural or synthetic adhesives? Questions for use on painting consolidation treatments..... Page Yu-Lee, Teresa Doménech-Carbó, Susana Martín-Rey - Adhesion parameters in protein adhesives stabilized by natural biocides on paintings consolidation treatments Page Susana Martin-Rey, J. Manuel Simón-Cortés, Mª Victoria Vivancos-Ramón, Cristina Robles-de la Cruz - Study about cohesive stability and structural silicones fill material, used in contemporary metal sculpture outdoor conserved. Page 217 Bioadhesion and medical adhesion Karima Bekir, Kais Fdhila, Imen Bakhrouf, Nabil Abid, Amina Bakhrouf - Molecular detection of adhesins genes and biofilm formation in methicillin resistant Staphylococcus aureus. Page Tarek Zmantar, Bochra Kouidhi, Hajer Hentati, Amina Bakhrouf - Cell surface hydrophobicity, biofilm formation, adhesives properties and molecular detection of adhesins genes in Staphylococcus aureus associated to dental caries... Page Zuzanna Okulus, Beata Strzemiecka, Beata Czarnecka, Adam Voelkel - Determination of the adhesion between tooth and dental filling by Inverse Gas Chromatography. Page Hanadi Marghalani - Microleakage at tooth/composite interface affected by various modes of light-irradiation... Page María Luisa González-Martín, Miguel Ángel Pacha-Olivenza, Amparo María Gallardo-Moreno - The effect of saliva on the bacterial adhesion and retention to titanium of two oral Streptococci. Page 226 xxxiii
35 POSTER PROGRAM María Luisa González-Martín, Abraham Rodríguez-Cano, Miguel Ángel Pacha-Olivenza, María Coronada Fernández- Calderón, Amparo María Gallardo-Moreno, Ciro Pérez-Giraldo, José Morales-Bruque - Dynamic bacterial retention and biofilm formation on silanized Ti6Al4V surface. Page Emre Kizilkan, Lars Heepe, Stanislav N. Gorb - Contribution of air entrapment to underwater adhesion of mushroom-shaped microstructure. Page 230 Fundamental Adhesion Ana Lucia Palencia Penagos, Kai von Garnier, Wulff Possart - Adhesion of silicon adhesives prepolymers on aluminum - an FTIR-ERAS study.... Page Christophe Nies, Kevin Belener, Wulff Possart - Adhesioninduced orientation of MDI on native metals Model experiments... Page Berkem Ozkaya, Bastian Mosebach, Guido Grundmeier - Molecular adhesion of phosphonic acids on aluminium-oxide investigated by AFM based-single Molecule Force Spectroscopy... Page Florian Heib, Rolf Hempelmann, KatjaGroß, Michael Schmitt - Experimental investigation of contact angles on vertical and inclined surfaces using sessile drop techniques... Page Frank Fug, Adrien Petry, Hendrik Jost, Wulff Possart - Adsorption of polyurethane monomers from the gas phase on native metals: Infrared study of the obtained layers. Page 239 xxxiv
36 SOCIAL PROGRAM A program of exciting social events will be offered, including conference, dinner, sight-seeing and shopping. Thursday 16:30-23:00 Visit to "Huerto del Cura" palm Garden (Elche) Outlet shopping Conference Dinner xxxv
37 GENERAL INFORMATION VENUE HOTEL MELIÁ ALICANTE Plaza del Puerto, Alicante (Spain) Tel: (34) Fax: (34) N +38º 20' 34.25" / W -0º 28' LANGUAGE The conference language will be English. CONFERENCE OFFICE VIAJES HISPANIA Avda Maisonnave, 11-7th floor Alicante (Spain) Tel.: [email protected] ACCOMMODATION Registration and accommodation has been reserved for conference participants at a special rate. Reservations should be made directly by the participants at: xxxvi
38 EXHIBITORS / SPONSORS EXHIBITORS SPONSORS xxxvii
39 xxxviii
Composite Design Fundamentals. David Richardson
Composite Design Fundamentals David Richardson Contents A review of the fundamental characteristics of composites Stiffness and Strength Anisotropic Role of fibre, matrix and interface Composite failure
Development of an innovative bio-based structural adhesive
Development of an innovative bio-based structural adhesive Blanca Palomo, R&D Engineer [email protected] RESCOLL Independent research company located in Pessac (33) specialized in technologic innovation
How To Make A Hot Melt Adhesive
Types of Bonding Physically hardening adhesives 2 2 Drying Adhesives They are made of polymers dissolved in solvent (Polychloroprene, Polyurethane) or dispersed in water (white glue based on PVA (Polyvinyl
DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE. November 15-19, 2015 Pittsburgh, PA, USA. Technical Program
DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE November 15-19, 2015 Pittsburgh, PA, USA Technical Program Corrosion Policy Track: Topic: Corrosion Management T.S. NAVAIR Corrosion
ENVIRONMENTAL EFFECTS ON COATINGS
ENVIRONMENTAL EFFECTS ON COATINGS Surfaces exposed to the environment, may be damaged by elements such as water, snow, ice, heat, dirt, smog, humidity, brake dust, grime, salts, chemical attack, and acid
Business Administration of Windchill PDMLink 10.0
Business Administration of Windchill PDMLink 10.0 Overview Course Code Course Length TRN-3160-T 3 Days After completing this course, you will be well prepared to set up and manage a basic Windchill PDMLink
Biomaterials in tissue engineering
Biomaterials in tissue engineering S. Swaminathan Director Centre for Nanotechnology & Advanced Biomaterials School of Chemical & Biotechnology SASTRA University Thanjavur 613 401 Tamil Nadu Page 1 of
R162-2f-206c. Certification of Continuing Education Course. (1) (a) The division may not award continuing education credit for a course that is
R162-2f-206c. Certification of Continuing Education Course. (1) (a) The division may not award continuing education credit for a course that is advertised in Utah to real estate licensees unless the course
This presentation is courtesy of
This presentation is courtesy of Advances in Flexible Packaging Adhesives CPP Expo Presentation September, 2005 Nancy Smith Agenda Basic types/ functions of adhesives used in flexible packaging Laminating
Numerical Analysis of Independent Wire Strand Core (IWSC) Wire Rope
Numerical Analysis of Independent Wire Strand Core (IWSC) Wire Rope Rakesh Sidharthan 1 Gnanavel B K 2 Assistant professor Mechanical, Department Professor, Mechanical Department, Gojan engineering college,
Doing Better Business in Germany
Doing Better Business in Germany Direct Investments Commerce and Trade Initial Orientation and Guidance for Clients and Legal Counsel Abroad Doing Better Business in Germany Doing Better Business in Germany
TABLE OF CONTENTS CHAPTER NO. TITLE PAGE NO. ABSTRACT
vii TABLE OF CONTENTS CHAPTER NO. TITLE PAGE NO. ABSTRACT LIST OF TABLES LIST OF FIGURES LIST OF SYMBOLS AND ABBREVIATIONS iii xvii xix xxvii 1 INTRODUCTION 1 1.1 GENERAL 1 1.2 OBJECTIVES AND SCOPE OF
Redux Film Adhesives, Foaming Films, Primers and Liquid Shims. About HEXCEL
About HEXCEL Hexcel is the largest US producer of carbon fibre; the world s largest weaver of structural fabrics; the number one producer of composite materials such as prepregs, film adhesives and honeycomb;
Best Available Technology for Sodium Hypochlorite Storage Tanks
Best Available Technology for Sodium Hypochlorite Storage Tanks Michael G. Stevens, Senior Staff Scientist, Ashland Inc. Paul Cohen, Diamond Fiberglass ABSTRACT Sodium hypochlorite disinfection has become
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete Ming-Gin Lee 1,a, Yi-Shuo Huang 1,b 1 Department of Construction Engineering, Chaoyang University of Technology,Taichung
List of approved Universities and Programmes by Yayasan Peneraju
1 ASIA PACIFIC UNIVERSITY OF BACHELOR DEGREE i. Bachelor of Arts (Hons.) in Accounting and Finance: TECHNOLOGY AND INNOVATION Forensic Accounting A6227 Taxation Forex and Investments ii. Bachelor of Science
Forensic Accounting Taxation
NO UNIVERSITY LEVEL PROGRAMME PROGRAMME CODE 1 ASIA PACIFIC UNIVERSITY OF i. Bachelor of Arts (Hons.) in Accounting and Finance: TECHNOLOGY AND INNOVATION Forensic Accounting Taxation A6227 Forex and Investments
Contemporary Craft Sector Profile and Analysis
Contemporary Craft Sector Profile and Analysis This briefing note distils information from several sources, to summarise the craft sector s current economic impact and business profile. Key documents are:
Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)
I Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT) Table of Content 1 Introduction...1 2 Improved Properties...1 3 Potential Applications...1 3.1 Current / short-term applications...3
Radiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications
Radiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications William Schaeffer Steven Tyson Indu Vappala Robert Kensicki Sartomer USA, LLC 502 Thomas Jones Way Exton, PA 19343
R&D Services Knowledge transfer
R&D Services Knowledge transfer Training Offer - November 2009 OCAS : a joint venture between ArcelorMittal and the Flemish Region R&D Knowledge transfer - Scope Market-oriented knowledge transfer in the
Technical Synopsis of Plasma Surface Treatments
Technical Synopsis of Plasma Surface Treatments Wesley Taylor Advisor: Dr. Bruce Welt University of Florida, Gainesville, FL December, 2009 Abstract Surface treatment technology delves into some of the
Thermoplastic composites
Thermoplastic composites Definition By definition, a thermoplastic is a material based on polymer (macromolecular compound) which can be shaped, in a liquid (viscous) state at a temperature either higher
Figure 1. A schematic representation of a PEO coatings: mushroom conformation on the left hand side and brush conformation on the right hand side.
7 General discussion Chapter 7 Microbial adhesion onto the surface of medical implants, like hip prostheses and urinary catheters, followed by biofilm formation, often leads to infections on these implants.
Characterization of Polymers Using TGA
application note Characterization of Polymers Using TGA W.J. Sichina, Marketing Manager Introduction Thermogravimetric analysis (TGA) is one of the members of the family of thermal analysis techniques
Electron Beam Technology for Pressure Sensitive Adhesive Applications
Electron Beam Technology for Pressure Sensitive Adhesive Applications Introduction Stephen C. Lapin, Ph.D. PCT Engineered Systems LLC Davenport, IA, USA Initial reports on the use of ultraviolet (UV) and
XII. 3.2 Determining Bulk Material Properties 40. 3.3 Determining the Properties of Fluids 42
Table of Contents Nomenclature (Selection) Terminology Symbols and Abbreviated Terms XXI XXIX XXXIII 1 Introduction 1 1.1 The Genesis of Polymer Testing as a Science 1 1.2 Factors Influencing Data Acquisition
Introduction to Windchill PDMLink 10.0 for Heavy Users
Introduction to Windchill PDMLink 10.0 for Heavy Users Overview Course Code Course Length TRN-3146-T 2 Days In this course, you will learn how to complete the day-to-day functions that enable you to create
Plastics and Polymer Business. Properties enhancement for Plastics
News Letter Vol. 18, issue October-December, 2012 Hyperdispersants and Coupling Agents for Thermoplastics and Thermosets Solplus, Ircolplus and Solsperse hyperdispersants and coupling agents have been
Mid Willamette Valley: Community Systems Background Document Marion, Polk, Yamhill, Linn, and Benton counties
Mid WillametteValley:CommunitySystemsBackgroundDocument Marion,Polk,Yamhill,Linn,andBentoncounties PreparedbytheClimateLeadershipInitiative April2010 OVERVIEW SurroundingtheWillametteRiverandborderedbytheCoastRangeandCascades,theMid
Diagnostic and Therapeutic Colonoscopy for Colorectal Neoplasia in the 21st Century: Expanding the Scope to IBD
Marbella (Spain), January 17th & 18th, 2013 Diagnostic and Therapeutic Colonoscopy for Colorectal Neoplasia in the 21st Century: Thursday, January 17th 2013 8:45-9:00 Welcome to the Hands-on Course Andres
Diagnostic and Therapeutic Colonoscopy for Colorectal Neoplasia in the 21st Century: Focus on IBD
Marbella (Spain), January 29th & 30th, 2015 Diagnostic and Therapeutic Colonoscopy for Colorectal Neoplasia in the 21st Century: Preliminary Program Thursday, January 29th 2015 15:45-16:00 Welcome to the
Tiangang TM BW-10LD (622)
Tiangang TM BW-10LD Oligomeric Hindered Amine Light Stabilizer (HALS) Poly-(N-β-hydroxyethyl-2,2,6,6-tetramethyl-4-hydroxy-piperidyl-succinate) CAS number 65447-77-0 BW-10LD BW-10LD is a highly effective
Derakane epoxy vinyl ester resins: The Evolution of Corrosion Resistant FRP
A Brief History on Corrosion Derakane epoxy vinyl ester resins: The Evolution of Corrosion Resistant FRP Corrosion in industrial processes has always threatened pipes, ducting, process equipment, scrubbers
1.1.2 Polypropylene The polypropylene must be a white opaque film, 1 2 mil thick. Biaxial orientation is preferred.
Library of Congress Preservation Directorate Specification Number 700 704 09 Specifications for Pressure Sensitive Adhesive Labels For Application to Single Paper Sheets and Text Pages of Bound Books For
Resistance of Plastics to Gamma Irradiation
Elastomers 1 MATERIAL TOLERANCE LEVEL (kgy) COMMENTS Butyl 50 Sheds particulate after irradiation. Ethylene Propylene 100 200 Crosslinks, yellows slightly. Diene Monomer (EPDM) Fluoro Elastomer 50 Avoid
Pulsed laser deposition of organic materials
Pulsed laser deposition of organic materials PhD theses Gabriella Kecskeméti Department of Optics and Quantum Electronics University of Szeged Supervisor: Dr. Béla Hopp senior research fellow Department
3M Scotch-Weld EPX Two-component structural adhesives and applicator guns
M Scotch-Weld EPX Two-component structural adhesives and applicator guns Innovation What is a structural adhesive? M s high-strength structural adhesives are fundamentally load-bearing formulations. Bond
REPAIR CONCEPT SUPPORTED BY LASER REMOVAL AND INDUCTIVE HEATING
28 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES REPAIR CONCEPT SUPPORTED BY LASER REMOVAL AND INDUCTIVE HEATING Markus Kaden*, Rüdiger Keck* *German Aerospace Center [email protected];[email protected]
Workflow Administration of Windchill 10.2
Workflow Administration of Windchill 10.2 Overview Course Code Course Length TRN-4339-T 2 Days In this course, you will learn about Windchill workflow features and how to design, configure, and test workflow
Temperature C 10 15 23 40. Cure time to reach hours - - - - LSS > 1MPa minutes 20 12 8 2
Advanced Materials Araldite 2021 Structural Adhesives TECHNICAL DATA SHEET Araldite 2021 Two component toughened methacrylate adhesive system Key properties Rapid curing High peel strength Multi purpose
Effect of Sterilization Techniques on Polymers
Effect of Sterilization Techniques on Polymers Contents of Presentation Introduction to Polymers Properties and Stability of Polymers Affect of Ionising Radiation and Ethylene Oxide on Polymers The need
Phosphoric Acid Anodized Aluminum Honeycomb
Phosphoric Acid Anodized Aluminum Honeycomb Description 02 and 06 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges. The HexWeb CR-PAA
Scotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013
Scotch-Weld TM Product Data Sheet Acrylic Adhesives Date: Supersedes: August 2013 Product Description 3M TM Scotch-Weld Acrylic Adhesives are high performance, twopart acrylic adhesives that offer good
High Performance PSA in Sheet Membrane in Water Protection
High Performance PSA in Sheet Membrane in Water Protection Xia Cao, Senior R&D Chemist, W. R. Grace, Cambridge MA 02140 Jyoti Seth, Strategic Program Leader, W. R. Grace, Cambridge MA 02140 Concrete is
NATO STANDARD AMedP-8.1 DOCUMENTATION RELATIVE TO INITIAL MEDICAL TREATMENT AND EVACUATION
NATO STANDARD AMedP-8.1 DOCUMENTATION RELATIVE TO INITIAL MEDICAL TREATMENT AND EVACUATION Edition A Version 1 JUNE 2013 NORTH ATLANTIC TREATY ORGANIZATION ALLIED MEDICAL PUBLICATION Published by the NATO
Electronic Materials able to detect, amplify and transmit electrical signals in a complex manner are light weight, compact and energy efficient
CHAPTER 1 Knowledge and Comprehension Problems: 1.1 What are the main classes of engineering materials? Answer1.1: Metallic, polymeric, ceramic, composite, and electronic materials are the five main classes.
Surface activation of plastics by plasma for adhesion promotion
Surface activation of plastics by plasma for adhesion promotion Uwe Stöhr, Ph. D. 1 Introduction In many fields a good adhesion between two materials is necessary. The adhesion should exist at the whole
CHAMBERS EUROPE GUIDE - 2015 EDITION
CHAMBERS EUROPE GUIDE - 2015 EDITION FIRM RANKINGS - SPAIN Practice Area 2015 2014 Banking & Finance 1 1 Capital Markets 1 1 Competition/European Law 2 2 Corporate/M&A 1 1 Corp. Compliance 1 1 Dispute
1952-1953 (Academic year)
Group 63 Seminar on Magnetism Massachusetts Institute of Technology Digital Computer Laboratory Archives Collection No. 12 Donor: Division VI Document Room Restriction: MITRE Personnel Contract a19( 122)
Education Session 1. Education Session 2. Inaugural Session
WEDNESDAY 4 NOVEMBER 2015 Education Session 1 09:30-10:30 S1a: Cell and viral vector manufacturing and distribution under GMP Chair: Ana Sanchez S1b: Systems biology: computational methods applied to advanced
DENT 5351 Final Examination 2007 NAME
NAME DENT 5351 Spring Semester 2007 INTRDUCTIN T BIMATERIALS FINAL EXAMINATIN (40 questions) February 16, 2007 8:00 a.m. 9:00 a.m. This final examination consists of 7 pages and 40 questions. Mark all
15. Silicones in the Plastics Industry G. Shearer, Multibase, a Dow Corning Company, Copley OH (USA)
15. Silicones in the Plastics Industry G. Shearer, Multibase, a Dow Corning Company, Copley OH (USA) Silicones are used in the plastics industry as additives for improving the processing and surface properties
Contents. iii. ix xi xi xi xiii xiii xiii xiv xv xvi xvii xix
What s New in Microsoft Office Project 2003 Getting Help Getting Help with This Book and Its CD-ROM Getting Help with Microsoft Office Project 2003 Using the Book s CD-ROM What s on the CD-ROM System Requirements
The University of Birmingham (Live System)
The University of Birmingham (Live System) Behaviour of Structural Insulated Panels (SIPs) under both short-term and long-term loadings Yang, Jian; Rungthonkit, Prathan Document Version Author final version
Plasma Electronic is Partner of. Tailor-Made Surfaces by Plasma Technology
Precision Fair 2013 Stand 171 Plasma Electronic is Partner of Tailor-Made Surfaces by Plasma Technology Dr. J. Geng, Plasma Electronic GmbH Modern Surface Technology in 1900 Overview A short introduction
Polymers: Introduction
Chapter Outline: Polymer Structures Hydrocarbon and Polymer Molecules Chemistry of Polymer Molecules Molecular Weight and Shape Molecular Structure and Configurations Copolymers Polymer Crystals Optional
SOLVING SECONDARY CONTAINMENT PROBLEMS
SOLVING SECONDARY CONTAINMENT PROBLEMS CEILCOTE CORROSION CONTROL PRODUCTS Leadership in Corrosion Problem Solving CEILCOTE As the pioneer and technological leader in polymer linings, coatings and flooring
and LUMINOUS CHEMICAL VAPOR DEPOSITION INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A.
LUMINOUS CHEMICAL VAPOR DEPOSITION and INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A. MARCEL MARCEL DEKKER. NEW YORK DEKKER Contents Preface iii Part I.
Basic Properties and Application of Auto Enamels
Basic Properties and Application of Auto Enamels Composition of Ceramic Automotive Glass Enamels Ceramic automotive glass colours are glass enamels that fire on to the glass during the bending process
referenceguide Reference Guide for Pressure-Sensitive Adhesive Tapes great to work with
referenceguide Reference Guide for Pressure-Sensitive Adhesive Tapes referenceguide Table of Contents Tapeology 1-5 What is a pressure-sensitive tape? 1 What are the different components of a tape? 1 How
Great Automotive Designs Enabled By Advances in Adhesive Bonding
Great Automotive Designs Enabled By Advances in Adhesive Bonding Mansour Mirdamadi and Greg Korchnak Dow Automotive Presentation Outline Classification of adhesive systems for body structure applications
Specifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners
ROHACELL Triple F. Complex shaped PMI Foam Cores for highly efficient FRP Composite
Complex shaped PMI Foam Cores for highly efficient FRP Composite ROHACELL Triple F Sandwich Fabrication for low to - A Novel Particle Foam high volume applications SAMPE tesdr. Kay Brazil Conference 2015
CLICKBOND FASTENER OVERVIEW:
Infastech Pty Ltd A.B.N. 98 000 482 986 A.C.N. 000 482 986 891 Wellington Road, Rowville, Victoria, 3178 Telephone: (03) 9765 6400 Fax (03) 9765 6444 CLICKBOND FASTENER OVERVIEW: The CLICKBOND fastening
Hot Melt Adhesives. TKH Technical Briefing Note 4. Industrieverband Klebstoffe e.v. www.klebstoffe.com. Version: March 2015
TKH Technical Briefing Note 4 Hot Melt Adhesives Version: March 2015 Published by Technische Kommission Holzklebstoffe (TKH: Technical Committee on Wood Adhesives) of Industrieverband Klebstoffe e.v.,
DETERMINATION OF TIME-TEMPERATURE SHIFT FACTOR FOR LONG-TERM LIFE PREDICTION OF POLYMER COMPOSITES
DETERMINATION OF TIME-TEMPERATURE SHIFT FACTOR FOR LONG-TERM LIFE PREDICTION OF POLYMER COMPOSITES K. Fukushima*, H. Cai**, M. Nakada*** and Y. Miyano*** * Graduate School, Kanazawa Institute of Technology
BSM 9.0 ESSENTIALS. Instructor-Led Training
BSM 9.0 ESSENTIALS Instructor-Led Training INTENDED AUDIENCE New users of Business Service Management (BSM) 9.0, including: Database Administrators System Administrators Network Administrators Operations
Adhesive Bonding of Natural Stone
Adhesive Bonding of Natural Stone Section I: Basics of Stone Adhesion Adhesive Theory There are many theories concerning the forces that are at work in forming an adhesive bond between two (2) different
PLASMA TECHNOLOGY OVERVIEW
PLASMA TECHNOLOGY OVERVIEW Plasmas are not a lab curiosity. Plasma processing has been an essential production tool for more than 30 years in the fabrication of microelectronic devices for example. Over
ROVACE HP-2931 High Performance Vinyl Acetate/Acrylic Copolymer Emulsion
ROVACE HP-2931 High Performance Vinyl Acetate/Acrylic Copolymer Emulsion Description ROVACE HP-2931, vinyl acetate acrylic copolymer emulsion, is designed for use in formulation high performance adhesives
ADVANCES IN ADHESIVE TECHNOLOGY FOR BONDING LIQUID SILICONE RUBBERS TO PLASTICS AND METALS
ADVANCES IN ADHESIVE TECHNOLOGY FOR BONDING LIQUID SILICONE RUBBERS TO PLASTICS AND METALS Paul A. Wheeler, Tarek A. Agag, Brian P. Carney, Rebecca S. Cowles, and Douglas H. Mowrey LORD Corporation, Erie,
Mechanical Characterization of the Damage Process in a Structural Adhesive Joint by Acoustic Emission
30th European Conference on Acoustic Emission Testing & 7th International Conference on Acoustic Emission University of Granada, 12-15 September 2012 www.ndt.net/ewgae-icae2012/ Mechanical Characterization
Scotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description
3 Scotch-Weld TM 1838 1838 1838-L Technical Data February, 2016 Description 3M TM Scotch-Weld TM s 1838 and are controlled flow products; Scotch-Weld 1838-L is flowable. These epoxy adhesives are two-part,
COMPOSITE MATERIALS. Asst. Prof. Dr. Ayşe KALEMTAŞ
COMPOSITE MATERIALS Office Hours: Tuesday, 16:30-17:30 [email protected], [email protected] Phone: +90 252 211 19 17 Metallurgical and Materials Engineering Department CONTENT Composite Materials Metal
Chapter 5 Bridge Deck Slabs. Bridge Engineering 1
Chapter 5 Bridge Deck Slabs Bridge Engineering 1 Basic types of bridge decks In-situ reinforced concrete deck- (most common type) Pre-cast concrete deck (minimize the use of local labor) Open steel grid
Scotch-Weld. Low-Odor Acrylic Adhesives DP810 DP810 NS. Technical Data June, 2004
3 Scotch-Weld TM Technical Data June, 2004 Product Description 3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 and DP810 NS are twopart, 1:1 mix ratio, toughened structural adhesives with less odor than
Experimental assessment of concrete damage due to exposure to high temperature and efficacy of the repair system
MATEC Web of Conferences 6, 06002 (2013) DOI: 10.1051/matecconf/20130606002 C Owned by the authors, published by EDP Sciences, 2013 Experimental assessment of concrete damage due to exposure to high temperature
Schedule of Bank Charges Schedule of Charges (Excluding FED)
Schedule of Bank Charges Schedule of Charges (Excluding FED) CONSUMER BANKING A VISA / Master Card 1 Credit Card Operations (i) Service Fee 3.33% Per month (40% APR) on Cash Advance 3.33% per month (40%
COMPOSITE MATERIALS. Asst. Prof. Dr. Ayşe KALEMTAŞ
COMPOSITE MATERIALS Office Hours: Tuesday, 16:30-17:30 [email protected], [email protected] Phone: +90 252 211 19 17 Metallurgical and Materials Engineering Department ISSUES TO ADDRESS Classification
Light metal corrosion protection with water-borne silane systems
Platzhalter Titelbild Light metal corrosion protection with water-borne silane systems Dr. Philipp Albert 14.06.2011 Agenda 1. lanes, hydrolysis and condensation, sol-gel process 2. Water-borne sol-gel
Schlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
DRAFT PROGRAMME Transbio Valencia event
DRAFT PROGRAMME Transbio Valencia event February 27th and 28th Field Study Best practices for company creation and development Workshop Housing & access to technologies for biotech companies Calendar February
PERFORMANCE EVALUATION OF WATER-FLOW WINDOW GLAZING
PERFORMANCE EVALUATION OF WATER-FLOW WINDOW GLAZING LI CHUNYING DOCTOR OF PHILOSOPHY CITY UNIVERSITY OF HONG KONG FEBRUARY 2012 CITY UNIVERSITY OF HONG KONG 香 港 城 市 大 學 Performance Evaluation of Water-flow
Rubber-to-Metal Bonding
The Delta Rubber Thought Leadership Series Rubber-to-Metal Bonding Part Art, Part Science By Kevin Violette The Delta Rubber Company Automotive and industrial manufacturers are increasingly are turning
Madrid LNG & SHIPPING Forum
The Premier International LNG & SHIPPING conference in Spain Madrid LNG & SHIPPING Forum 2 nd Edition 30 th 31 st May. Hotel Husa Princesa, Madrid SUMMIT GUIDE Host Sponsors www.ingenierojorgejuan.com/lng_madrid
U.S. BANKRUPTCY COURT FOR THE DISTRICT OF PUERTO RICO
Monday, May 14, 2012 COURTROOM 3 COURTROOM 3 THIRD FLOOR 9:00 AM 29-00008-ESL7 Ch 7 Miscellaneous Entry Moving: Matter: NO HEARINGS SCHEDULED Monday, May 14, 2012 Page 1 Tuesday, May 15, 2012 COURTROOM
USING PRIMERS IN COMBINATION WITH ADHESIVE TIE-LAYER RESINS OR THEIR BLENDS TO MAKE STRUCTURES WITH UNIQUE PERFORMANCE.
USING PRIMERS IN COMBINATION WITH ADHESIVE TIE-LAYER RESINS OR THEIR BLENDS TO MAKE STRUCTURES WITH UNIQUE PERFORMANCE. Richard Allen, Ph.D. Mica Corporation 9 Mountain View Drive Shelton, CT 06484 USA
Ministry of Social Justice and Empowerment (Department of Social Justice & Empowerment) Government of India
Dr. Ambedkar Central Sector Scheme of Interest Subsidy on Educational Loan for Overseas Studies for Other Backward Classes (OBCs) (Effective from 2014-15) Ministry of Social Justice and Empowerment (Department
Efficient Assembly And Joining: Reversible Bonded Joints Using Nano-ferromagnetic Particles
Efficient Assembly And Joining: Reversible Bonded Joints Using Nano-ferromagnetic Particles ACC Automotive Team Increase P&PC in automotive Provide transformative innovations www.plastics-car.com Concept:
8 EXTRA LIGHT GRC SANDWICH ELEMENTS FOR ROOFING IN INDUSTRIAL BUILDINGS
8 EXTRA LIGHT GRC SANDWICH ELEMENTS FOR ROOFING IN INDUSTRIAL BUILDINGS MARICA DELLA BELLA and DIEGO CIAN Precompressi Centro Nord S.p.A., Italy SUMMARY: Secondary roofing elements, complementary to the
Waterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries
Waterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries Introduction Wastewater of petrochemical industries and refineries contains high amounts of emulsified aliphatic or
TABLE OF CONTENTS CHAPTER TITLE PAGE DECLARATION ACKNOWLEDGEMENT ABSTRACT LIST OF TABLES LIST OF FIGURES LIST OF SYMBOLS LIST OF APPENDICES
vii TABLE OF CONTENTS CHAPTER TITLE PAGE DECLARATION ii ACKNOWLEDGEMENT iv ABSTRACT v TABLE OF CONTENTS vii LIST OF TABLES xii LIST OF FIGURES xiv LIST OF SYMBOLS xvii LIST OF APPENDICES xviii 1 INTRODUCTION
PTFE Slide Bearings 04/10 149
04/10 149 1.0 GENERAL INFORMATION In a wide range of applications, PTFE Slide bearings are superior to conventional expansion plates, rollers and rocker arm type supports. They support petrochemical plant,
more than you expect Threadlockers, sealants and adhesives
Threadlockers, sealants and adhesives Threadlockers and thread sealants The threadlockers are used to prevent loosening in a joint. At the same time the cured adhesive keeps moisture and, for example corrosive
Rapid Prototyping Technologies. May, 2016
Rapid Prototyping Technologies May, 2016 WE HAVE ALL THE NECESSARY TOOLS TO ENSURE THE FINAL SUCCESS OF YOUR PROTOTYPE. Andaltec can help you in all the steps, from the design to fully finished prototype
Barrier Coatings: Conversion and Production Status
Transparent SiO 2 Barrier Coatings: Conversion and Production Status E. Finson and J. Felts, Airco Coating Technology, Concord, CA Keywords: Permeation barrier coatings; Reactive evaporation; SiO 2 ABSTRACT
Technical Data Sheet February 2014
Scotch-Weld Technical Data Sheet February 2014 Product Description s are high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened products
