Project Application Instruction Manual

Size: px

Start display at page:

Download "Project Application Instruction Manual"

Sylvia Shepherd
10 years ago
Views:

1 (English) HM-SP Project Application Instruction Manual (Standalone connection) Thank you for purchasing Shimano products. This instruction manual explains the operation of the E-TUBE PROJECT. Be sure to read this manual before use in order to fully utilize the functions. In order to use E-TUBE PROJECT, the SM-PCE1 or SM-BCR2 interface is required. Check the following support site for the latest support information.

This instruction manual explains the operation of the E-TUBE PROJECT.

2 CONTENTS CONNECTING THE SM-PCE Connecting a stand-alone unit... 3 When connecting a unit alone (when no terminal is available)... 3 Connection check... 4 Chart window... 5 Unit status... 5 Unit status... 5 ABOUT THIS DOCUMENT... 6 REGISTERED TRADEMARKS AND TRADEMARKS / 6

.. 3 Connection check... 4 Chart window... 5 Unit status.

3 CONNECTING THE SM-PCE1 CONNECTING THE SM-PCE1 To make a single unit connection, it is necessary to use SM-PCE1. When connecting the SM-PCE1 to the PC, connect it directly to the USB port of the PC, without using an intermediate device such as a USB hub. Connecting a stand-alone unit When connecting a unit alone (when no terminal is available) 3 / 6

When connecting the SM-PCE1 to the PC, connect it directly to the USB port of the PC,

4 Connection check Connection check A function to check whether 1 unit is connected correctly and can be recognized by a PC. Perform unit recognition and check whether 1 connected unit is correctly recognized. When 1 unit is recognized correctly, all functions other than connection check, become available. The available functions differ depending on the bicycle type of the recognized unit. If the unit is not recognized correctly, the electric wire may not be connected correctly or may be defective. 4 / 6

When 1 unit is recognized correctly, all functions other than connection check, become available.

5 Chart window Chart window This screen shows the unit status and data while the E-TUBE PROJECT is being used. The display changes to match the group of the connected unit. Unit status This displays the statuses of connected units graphically. The unit status displays are as follows. View Unit status Illuminated green box Flashing green box Flashing green Illuminated green Flashing red Illuminated yellow Connected Selected Processing Processing result: Normal Processing result: Problem Firmware update available Unit status The following data for the units which are connected is extracted and displayed. If you click on the icon for a unit, the unit name (model number) and firmware version for that unit will be displayed. * The box containing this data can be moved by dragging it with the mouse. 5 / 6

View Unit status Illuminated green box Flashing green box Flashing green Illuminated green Flashing red Illuminated yellow Connected Selected Processing Processing result: Normal Processing result:

6 ABOUT THIS DOCUMENT ABOUT THIS DOCUMENT The contents of this document are subject to revision in the future without notice. Reproducing or transmitting this document in whole or in part in any form or for any purpose whatsoever without the express written permission of SHIMANO INC. is expressly forbidden. However, this is not to be taken as a limit on the customer s rights under applicable copyright laws. SHIMANO INC. may own the rights to any patents, patent applications, trademarks, copyrights and any other intangible property rights contained in this document. Unless otherwise specified, the customer is not granted rights to any patents, trademarks, copyrights or any other intangible intellectual property contained in this document. REGISTERED TRADEMARKS AND TRADEMARKS Shimano is a trademark or registered trademark of SHIMANO INC. in Japan and other countries. Project is a trademark of SHIMANO, INC. in Japan and other countries. Microsoft, Windows Vista TM, Windows 7, Windows 8 are registered trademarks or trademarks of Microsoft Corporation in the United States of America and other countries. All other company names, product names and service names, etc. are the property of their respective owners. One Holland, Irvine, California 92618, U.S.A. Phone: Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka , Japan Please note: specifications are subject to change for improvement without notice. (English) 6 / 6

However, this is not to be taken as a limit on the customer s rights under applicable copyright laws. SHIMANO INC.

Pipeliner CRM Phaenomena Guide Opportunity Management. 2015 Pipelinersales Inc. www.pipelinersales.com

Pipeliner CRM Phaenomena Guide Opportunity Management. 2015 Pipelinersales Inc. www.pipelinersales.com Opportunity Management 205 Pipelinersales Inc. www.pipelinersales.com Opportunity Management Learn how to manage sales opportunities with Pipeliner Sales CRM Application. CONTENT. Creating and sharing