An Overview Presentation. Inflatable DST Equipment
|
|
- Rafe Phelps
- 7 years ago
- Views:
Transcription
1 An Overview Presentation Inflatable DST Equipment
2 Inflatable Drillstem Testing Highlights 1 of 2 Confirms the presence of commercial volumes of hydrocarbons Provides accurate readings of pressure and temperature values in well bore Manufactured to meet the requirements of sour service Designed to run in vertical, deviated and horizontal well bores
3 Inflatable Drillstem Testing Highlights Inflatable Straddle Packers function to achieve selective zonal isolation Capable of testing multiple zones in one downhole trip Saves costs of casings, perforating and setting bridge plugs if the well is water bearing or unproductive 2 of 2
4 Sample Drillstem Testing String 1. Bar Drop Reverse Circulating Sub 2. Over Pressure Kill Reverse Valve 3. Hydraulic Downhole Shut-in Tool 4. Bottom Hole Sampler 5. Recorder Carrier 6. Squeeze Relief 7. TD Hydraulic Jars 8. Safety Joint 9. Downhole Inflate Pump 10. Screen 11. Inflatable Upper Packer 12. Recorder Carrier 13. Interval Spacing with Bypass Pipe 14. Inflatable Bottom Packer 15. Drag Spring
5 Bar Drop Reverse Circulating Sub 1 of 3 The Bar Drop Sub is designed as a back-up circulating device to reverse out the string. To function, a bar is dropped from surface through the test string. It shears a knock-off rod inside the tool. Once sheared it is then possible to reverse or forward circulate.
6 Bar Drop Reverse Circulating Sub 2 of 3 Bar Drop Sub only functions in a vertical position. If not possible to run the Bar Drop Sub in vertical position, a rupture disc must be run in place of the knock-off rod. The rupture disc is a shear style disc that bursts at a predetermined value.
7 Bar Drop Reverse Circulating Sub 3 of 3 To rupture the disc, pressure the test string up to and beyond the predetermined shear value. Once ruptured the string will allow you to reverse or forward circulate.
8 Hydraulic Downhole Shut-in Tool 1 of 3 A downhole valve that allows for multiple openings and closings. The Shut-in Tool allows running into the hole with an empty test string. This eliminates the hydrostatic pressure on the formation at setting depth. CLOSED OPEN
9 Hydraulic Downhole Shut-in Tool 2 of 3 Functioned by slacking weight on the multiple shutin tool. When weight is slacked off (E.G. 10,000 lbs for five minutes) the valve will open. To close, pick the string back up to the neutral weight and the valve will close immediately. CLOSED OPEN
10 Hydraulic Downhole Shut-in Tool 3 of 3 The tool is also used to achieve periods of flow and downhole shut-in during testing, eliminating false data from the test string wellbore storage. The designed delayed tool opening avoids accidental activation while running in the hole. CLOSED OPEN
11 Over Pressure Kill Reverse Valve 1 of 2 The primary circulating device that allows the reversing out of hydrocarbons from the DST string following a successful test. Functioned by a pressure activated internal sleeve that shifts to open six circulating ports.
12 Over Pressure Kill Reverse Valve 2 of 2 After you apply the predetermined amount of pressure to open the valve, the DST string can be either forward or reverse circulated.
13 Bottom Hole Sampler 1 of 2 Designed to capture a downhole fluid sample. Works in conjunction with the Hydraulic Multiple Shut-in Tool. Captures a sample of the last formation tested prior to tripping out of the well.
14 Bottom Hole Sampler 2 of 2 This is an optional tool to be run during testing at the client s request.
15 Recorder Carrier Carries and protects the downhole memory guages. Each Recorder Carrier can house three guages. Can be placed at any location in the test string. Carriers can be run at multiple locations on the DST string. Locations based on clients data collection requirements. EXTERNAL INTERNAL
16 Squeeze Relief Sub The Squeeze Relief Sub is run in the DST string to effectively allow the upper and lower packers to equalize while running in and out of the well.
17 TD Hydraulic Jars 1 of 2 Run in the DST string to provide a means of jarring and freeing of stuck tools in the event of downhole issues. Functions by applying an overpull to the string. When the tool is pulled into tension, a metering system inside the Jars slowly extends until a free point is reached.
18 TD Hydraulic Jars 2 of 2 Once the free point is reached, the tools provide the effect of a hammer striking an anvil. This gives a downhole jar to the tools. The Jars can be functioned several times if required.
19 Safety Joint 1 of 2 Designed for use in extremely rare emergency systems where the DST DHA is stuck and unable to be freed using conventional methods. This tool allows you to backoff the stuck BHA with several hand rotations and pull out of the hole allowing recovery of all tools located above the Safety Joint.
20 Safety Joint 2 of 2 The lower portion of the DST string can be recovered with larger Jars or fishing tools once the BHA is recovered.
21 Downhole Inflate Pump Designed to inflate the upper and lower packers. Capable of multiple inflation and deflations in one trip. Functions through the rotation of the DST string aided by the drag string. Dual action piston provides superior pumping capabilities for faster inflation times. DOWN UP
22 Screen To be run directly below the Downhole Inflate Pump. Used to filter out debris, and allow only clean drilling fluid to enter the pump and inflate the packers.
23 Upper Inflatable Packer This assembly provides the upper seal for selective zonal isolation. Inflated by pressure supplied from the Downhole Inflate Pump. The bottom Sub on the packer also provides communication point from the string to the formation of interest.
24 Interval Spacing with Bypass Pipe 1 of 2 Used to space out the packers in order to achieve the appropriate testing interval in the formation of interest. In addition, the Interval Spacing conveys pressure from the upper packer to the lower packer.
25 Interval Spacing with Bypass Pipe 2 of 2 Housed in the Interval Spacing is the Bypass Pipe, which allows communication from the upper packer to the lower packer. This prevents the string from getting differentially stuck.
26 Bottom Inflate Packer The Bottom Packer assembly provides the bottom seal for selective zonal isolation. The packer is inflated by pressure supplied from the Downhole Inflate Pump.
27 Drag Spring 1 of 2 Placed at the bottom of the DST string to provide an anchor for the Downhole Inflate Pump. The Drag String stops the bottom of the BHA from rotating. This allows the remainder of test string to be rotated which functions the pump and inflates the packers.
28 Drag Spring 2 of 2 The Drag String aids in communication between the upper and lower packer to prevent the BHA from getting differentially stuck.
29 Contact Information Dylan Winkler International Sales Manager T C Curtis Makar Operations Manager cmakar@worldoiltools.com T ext 2259 C
Drilling Problems. pull
Drilling Problems Pipe Sticking Lost Circulation Hole Deviation Pipe Failures Borehole Instability Mud Contamination Formation Damage Hole Cleaning H S General Equipment & Personnel Pipe Sticking Can not
More informationWELL COMMANDER Versatile multi-cycle ball-activated drilling valve for mitigating downhole hazards
WELL COMMANDER Versatile multi-cycle ball-activated drilling valve for mitigating downhole hazards Note: Operating instructions updated July 2014 WELL COMMANDER: Versatile multicycle ball-activated drilling
More information10 Wireline operations
10 WIRELINE OPERATIONS... 1 10.1 GENERAL... 1 10.2 WELL BARRIER SCHEMATICS... 1 10.3 WELL BARRIER ACCEPTANCE CRITERIA... 1 10.3.1 Well control equipment configuration... 1 10.3.2 Deployment of toolstrings...
More informationArgentina Tataru*, Marcel Adrian Piteiu*, Dan-Paul Stefanescu*, Ioana Vlasin*
WIERTNICTWO NAFTA GAZ TOM 24 ZESZYT 1 2007 Argentina Tataru*, Marcel Adrian Piteiu*, Dan-Paul Stefanescu*, Ioana Vlasin* NEW TECHNICAL CONSIDERATIONS OF ROMGAZ COMPANY REGARDING DRILLING, COMPLETION AND
More informationFishing Jar. Fishing Jar Accessory Tools. Assembly and Operation. Construction. Recommended Spares
Fishing Jar Accessory Tools Fishing Jar The Gotco Hydraulic Fishing Jar is an easy-to-use accessory tool that assists in various operations such as fishing, testing, coring, reaming, and washover. Designed
More informationFiber Optics in a Bakken Multi-Stage Fractured Well. Montana Tech 2011 SPE Drilling Symposium Presented by: Chelsea Kadler
Fiber Optics in a Bakken Multi-Stage Fractured Well Montana Tech 2011 SPE Drilling Symposium Presented by: Chelsea Kadler Agenda FracPoint Design FracPoint Real-time Monitoring System Downhole Equipment
More informationIntroduction. The following is an outline of the contents of this paper: Definition of Artificial Lift Page 2. How an Oil Well is Produced Page 2
Introduction Canadian Oilwell Systems Company and it s subsidiaries are suppliers of oil well Electric Submersible Pumping systems (ESPs). Such pumps are used to lift oil from oil wells so that the oil
More informationWHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU!
WHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU! Atlanta (Monroe) GA 770-267-3787 gpm@gpmhydraulic.com www.gpmhydraulic.com What You Don t Know About Hydraulic Accumulators Can Kill You TABLE OF CONTENTS
More informationTax Executives Institute
Tax Executives Institute Texas Oil and Gas Transactions May 6, 2013 Circular 230 disclaimer Any US tax advice contained herein was not intended or written to be used, and cannot be used, for the purpose
More informationE-Line and Braided Line. E-Line Open Hole wireline
E-Line and Braided Line E-Line Open Hole wireline Braided Line More strength Less feel Harder to seal Much harder to fish Braided line stronger (2800 to 3500 lb working strength, but less feel when fishing
More informationAn Introduction to Oil and Gas Well Servicing
An Introduction to Oil and Gas Well Servicing Educational Material from the IOM 3 Oil and Gas Division The global network for the materials cycle Introduction The Institute of Materials, Minerals & Mining
More informationVolkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
More informationCOMPARISON OF DRILLING TECHNOLOGIES BETWEEN TOP DRIVE AND ROTARY TABLE IN GEOTHERMAL FIELDS: A CASE STUDY OF OLKARIA GEOTHERMAL FIELDS.
Proceedings 5 th African Rift geothermal Conference Arusha, Tanzania, 29-31 October 2014 COMPARISON OF DRILLING TECHNOLOGIES BETWEEN TOP DRIVE AND ROTARY TABLE IN GEOTHERMAL FIELDS: A CASE STUDY OF OLKARIA
More informationINSITU TESTS! Shear Vanes! Shear Vanes! Shear Vane Test! Sensitive Soils! Insitu testing is used for two reasons:!
In-situ Testing! Insitu Testing! Insitu testing is used for two reasons:! To allow the determination of shear strength or penetration resistance or permeability of soils that would be difficult or impossible
More informationWellbore Integrity Restoration Services
Wellbore Integrity Restoration Services New Life for Mature Wells Optimize and extend recovery with cost-effective, integrated services for permanent casing repair and a full range of isolation applications.
More informationDecisionSpace Well Engineering Software
DATA SHEET DecisionSpace Well Engineering Software DecisionSpace Drilling & Completions Key features Configure the right tools to drill any type of well Dramatically simple to use, complete complex fluids
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationPART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
More informationDirective 059: Well Drilling and Completion Data Filing Requirements
Directive 059 Directive 059: Well Drilling and Completion Data Filing Requirements December 19, 2012 Effective June 17, 2013, the Energy Resources Conservation Board (ERCB) has been succeeded by the Alberta
More informationWellCAP IADC WELL CONTROL ACCREDITATION PROGRAM
WellCAP IADC WELL CONTROL ACCREDITATION PROGRAM WORKOVER & COMPLETION OPERATIONS CORE CURRICULUM AND RELATED FORM WCT-2WF FUNDAMENTAL LEVEL The purpose of the core curriculum is to identify a body of knowledge
More informationDIRECT PUSH DRILLING.
DIRECT PUSH DRILLING. CONCEPT. Direct Push Drilling is a method of drilling and sampling where the tools are pushed or driven into the ground. No rotation is involved so all the samples are uncontaminated
More informationWorking Out of a Tight Spot
Working Out of a Tight Spot For more than 80 years, jars have been widely accepted in the drilling industry as inexpensive contingencies to save rig time and to protect the drillstring and wellbore from
More informationAdvancing Reservoir Performance. Wellbore Cleanup Tools and Displacement Chemicals
Advancing Reservoir Performance Wellbore Cleanup Tools and Displacement Chemicals Wellbore Cleanup Tools and Displacement Chemicals Introduction Since the first oil well was drilled in the late 19th century,
More informationCLEAR. Hole cleaning and wellbore risk reduction service
CLEAR Hole cleaning and wellbore risk reduction service The CLEAR* hole cleaning and wellbore risk reduction service, delivered by Geoservices, a Schlumberger company, monitors hole cleaning effectiveness
More informationWellbore Integrity Restoration Services
Wellbore Integrity Restoration Services New Life for Mature Wells Optimize and extend recovery with cost-effective, integrated services for permanent casing repair and a full range of isolation applications.
More informationHPHT CAPPING STACKS AND NEW TECHNOLOGY FOR SUBSEA WELL CONTROL. December 3, 2014 Presenter: Mike Cargol
HPHT CAPPING STACKS AND NEW TECHNOLOGY FOR SUBSEA WELL CONTROL December 3, 2014 Presenter: Mike Cargol Agenda Development Update HPHT Capping Stack Mudline Closure Device Divert and Flow System Well Kill
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationRotary Vertical Drilling System (RVDS)
1 Rotary Vertical Drilling System (RVDS) 2 www.micon-drilling.de phone +49.5144.4936.0 Contents Company Profile... 03 MICON Rotary Vertical Drilling System (RVDS)... 04/05 RVDS 7.3/4...06/07 RVDS 10...08/09
More informationGrassroots Drilling. A History and Look Ahead. David Wennerstrom. ICOTA Roundtable October 2005 Canadian Chapter
Grassroots Drilling A History and Look Ahead David Wennerstrom ICOTA Roundtable October 2005 Canadian Chapter In the past 10 years CTD rigs have come to dominate much of the shallow gas drilling market
More informationM A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
More informationCOUNTERBALANCE VALVES
COUNTERBALANCE VALVES Introduction They are modulating valves which allow free flow into the actuator and then block the reverse flow until they feel a pilot pressure inversely proportional to the load
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)
17 Engine-Lubrication (Page GR-17) Lubrication system components, removing and installing Oil filter housing, disassembling and assembling Oil pan, removing and installing Oil pressure and oil pressure
More informationMercedes 722.3 722.4
96 Mercedes 7. 7. 5 6 7 8 - Clutch K - Brake Band B - Disc Brake B - Wide Planet Pinion 5 - One-Way Clutch F 6 - Clutch K 7 - Brake Band B 8 - Narrow Planet Pinion Int. Band Fwd. Band Rev. Clutch Direct
More informationStandard Hydraulic Piping Flushing Procedure
Page 1 of 6 1.0 Scope This procedure covers the minimum technical requirements for cleaning and flushing of Hydraulic and Piping, and related accessories. 2.0 Introduction In hydraulic fluid power systems,
More informationOPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST
HUSKIE TOOLS, INC. OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST GENERAL INFORMATION GUIDE FOR S-240 CUTTER The following steps are guidelines for safe operation of the Huskie
More informationTruTrak Automated directional drilling system
D r i l l i n g a n d E v a l u a t i o n TruTrak Automated directional drilling system Answering the need for improved drilling precision and efficiency Simple wells are not so simple anymore While 2D
More informationPlug and Abandonment Forum
Plug and Abandonment Forum Developments in Non-Traditional Plug and Abandonment Methods Thomas Ferg ConocoPhillips Norway June 13, 2013 Efficient P&A Thoughts - Do as Much as Possible Without a Rig Remove
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More informationSetting a Global Standard. www.dril-quip.com. SingleBore Subsea Completion System
Setting a Global Standard www.dril-quip.com SingleBore Subsea Completion System Dril-quip s Vertical Tree Surface Tree Tubing or Drill Pipe Running String Offshore, Time is Money. Dril-quip s SingleBore
More informationUnderbalanced drilling of oil wells in Saudi Arabia: case history and lessons learned
Underbalanced drilling of oil wells in Saudi Arabia: case history and lessons learned By Muhammad A Muqeem and Clark M Jarrett, Saudi Aramco; Hassan J Abdul, Weatherford CPD&T UNDERBALANCED DRILLING (UBD)
More informationBLADDER SURGE CONTROL SYSTEM
PART I GENERAL 1.01 Description BLADDER SURGE CONTROL SYSTEM This specification describes the requirements for a Bladder Surge Control System. The purpose of the system is to minimize transient pressures
More informationChapter 7 Hydraulic System Troubleshooting
Chapter 7 Hydraulic System Troubleshooting General The following troubleshooting information is provided as a general guide to identify, locate and correct problems that may be experienced with the hydraulic
More informationEffect of Temperature on Wireline Cables Technical Bulletin Ten
The oil and gas industry exposes manufacturers and service companies to some of the most challenging environments anywhere. During wireline operations, cables are routinely run tens of thousands of feet
More informationC O M P L E T I O N S E R V I C E S
Well Screens Well Screens Contents ProWeld TM ProWeld TM TOP DynoFlo TM DB UniFlo HELICAL Inflow Control Screen UniFlo TM ROI Inflow Control Screen SlimFlo TM Pre-packed CoilFlo TM DB Screen Communication
More informationSpecialized Tools for Wellbore Debris Recovery
Specialized Tools for Wellbore Debris Recovery In the late 1700s, Giovanni Battista Venturi, an Italian physicist, described a reduction in pressure when fluid flows through a restriction. Now, engineers
More informationFILLING AND PURGING THE SYSTEM
FILLING INSTRUCTIONS FOR WATER HEATER OR CONDENSING BOILER (City Water) Safety tip: Before beginning, turn off power to boiler and circulator. FILLING AND PURGING Step 1: Close Return Manifold Isolation
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationNORSOK Standard D-010 Rev. 4, August 2012
Below is a listing of the main changes 1. Definitions of suspension, temporary and permanent abandonment 2. Included more examples of well barrier schematics 3. Included illustrations for permanent abandonment
More informationWireline Tool String. A standard set of wireline tool string typically consist of:
Wireline Tool String The Wireline Tool String is necessary for the efficient surface control during the running and pulling operations on slickline of sub surface controlled devices. An assembly of wireline
More informationUnderstanding Well Construction and Surface Footprint
Understanding Well Construction and Surface Footprint Well Construction Timeline Well Site Planning & Preparation Drilling Stage 1: Planning and Preparation Acquire Surface Lease Agreement Determination
More informationEnergize your mind. www.halliburton.com April 2007. Lightweight Cement Meets Challenges of Weak Formations and Depleted Zones
Energize your mind. www.halliburton.com April 2007 Lightweight Cement Meets Challenges of Weak Formations and Depleted Zones Today, operators are forced to drill in increasingly challenging environments
More informationTUTORIAL. REbUILdING. REAR CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-2
Part #: HT-2 1965-82 CORVETTE O-RING CONVERSION REAR CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
More informationSample Career Ladder/Lattice for Energy (Petroleum Sector)
Click on a job title to see examples of descriptive information about the job. Click on a link between job titles to see the critical development experiences needed to move to that job on the pathway.
More informationHydraulic Trouble Shooting
Hydraulic Trouble Shooting Hydraulic systems can be very simple, such as a hand pump pumping up a small hydraulic jack, or very complex, with several pumps, complex valving, accumulators, and many cylinders
More informationKWANG SING ENGINEERING PTE LTD
KWANG SING ENGINEERING PTE LTD 1. INTRODUCTION This report represents the soil investigation works at Aljunied Road / Geylang East Central. The objective of the soil investigation is to obtain soil parameters
More informationMaterial taken from Fluid Power Circuits and Controls, John S. Cundiff, 2001
Pressure Control Chapter 3 Material taken from Fluid Power Circuits and Controls, John S. Cundiff, 2001 Introduction Pressure control is a key element in the design of any circuit. Used correctly, it can
More informationMechanical Seal Piping Plans
Mechanical Seal Piping Plans Single Seals plans 01, 02, 03, 11, 13, 14, 21, 23, 31, 32, 41 Dual Seals plans 52, 53A, 53B, 53C, 54, 55 Quench Seals plans 62, 65A, 65B, 66A, 66B Gas Seals plans 72, 74, 75,
More informationWELLBORE STORAGE. The fluid produced, q, is the sum production of fluid from the wellbore, q wb, and fluid coming from the reservoir, q sf.
Tom Aage Jelmert NTNU Department of Petroleum Engineering and Applied Geophysics WELLBORE STORAGE Immediately after a rate change, part of the production may be due to expansion or compression of fluid
More informationEric Six Heath Consultants Incorporated
Eric Six Heath Consultants Incorporated 9030 Monroe Road Houston, TX 77061 www.heathus.com The contents of this manual are proprietary to Heath Consultants (HEATH). Reproduction in whole or in part of
More informationOperating Instruction Manual For S-40B Hydraulic Cutters With Parts List
HUSKIE TOOLS, INC. Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List GENERAL INFORMATION GUIDE FOR S-40B CUTTER The following steps are guidelines for safe operation of the Huskie
More informationDrill String Design. The following topics will be discussed
Drill String Design The following topics will be discussed Kelly Drill pipe Drill collars Accessories; heavy wall drill pipe, jars, stabilizers, reamers, shock sub and bit sub Drill bits 1 Kelly Used to
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationPressure Coring, A New Tool for Unconventional Oil & Gas Characterization. Matt Bjorum Global Product Line Manager
Pressure Coring, A New Tool for Unconventional Oil & Gas Characterization Matt Bjorum Global Product Line Manager Outline Technology Overview Coring Configurations Tool Overview Surface Handling and Data
More informationBuy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1
More informationBHA Design. 2011 Best-drilling-practices.tk. All rights reserved.
BHA Design Drill Collar vs. Heavy Weight Drill Pipe Use minimum number of drill collars in the BHA. The noticeable exception is the drilling of vertical wells. The main advantages of omitting drill collars
More informationService Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
More informationPVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
More informationEXCAVATOR SAFETY TRAINING
EXCAVATOR SAFETY TRAINING INSPECTION CHECKLIST INSPECTION AREA INSPECTION RESULTS Sat. Unsat. N/A Comments Carrier & Car Body Rotation system Tracks Rollers Frame, welds, bolts Drive system Upper Structure
More informationModel 43AP Pneumatic Controller, Style B
Instruction MI 011-476 January 1980 Model 43AP Pneumatic Controller, Style B Installation and Operation Model 43AP Controller continuously detects the difference between a process measurement and its set
More informationThe Impact Of Cementing On Proper Well Control
The Impact Of Cementing On Proper Well Control Lee Dillenbeck Senior Advisor, Cementing Chevron ETC Drilling and Completions 2010 Chevron Learning Objectives Explain the main reasons for cementing wells
More informationExample. Fluid Power. Circuits
Example Fluid Power Circuits To Enhance Symbol Reading Skills To Work On Circuit Reading Skills With Answers HI LO Pump Circuit 18 A1 B1 17 16 15 13 Set 14 2,000 PSI PG2 Set 500 PSI 12 11 7 8 10 PG1 9
More informationPresented by Rory S. McLaren. SAFE by DESIGN
Presented by Rory S. McLaren Copyright 2013 1 Hydraulic safety doesn t just happen, it has to be pursued! Safety MUST be the nucleus of hydraulic system design. The responsibility of safe design must be
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More informationNORSOK STANDARD DRILLING & WELL OPERATIONS
NORSOK STANDARD DRILLING & WELL OPERATIONS D-010 Please note that whilst every effort has been made to ensure the accuracy of the NORSOK standards neither OLF nor TBL or any of their members will assume
More informationTUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1
Part #: HT-1 1965-82 CORVETTE O-RING CONVERSION front CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
More informationBOP PRESSURE TESTING PROCEDURE
0 Discuss Operator BOP requirements WITH RIG MANAGER. Insure that all Romfor's BOP equipment is tested consistent with Romfor's policy. This may require Nabors to incur the cost for the testing subcontractor
More informationRigorous Qualification and Development Program
FMC Subsea High Capacity 20K Wellhead System Overview 03/20/2013 UWD HC-20 Subsea Wellhead System Rigorous Qualification and Development Program 2 1 Qualification program Qualification testing is performed
More informationWELL LOGGING TECHNIQUES WELL LOGGING DEPARTMENT OIL INDIA LIMITED
WELL LOGGING TECHNIQUES WELL LOGGING DEPARTMENT OIL INDIA LIMITED The Hydrocarbon E & P Process In the exploration process, a most probable hydrocarbon bearing rock structure is defined based on seismic
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationHydraulic Fracturing Operations Well Construction and Integrity Guidelines API GUIDANCE DOCUMENT HF1 FIRST EDITION, OCTOBER 2009
Hydraulic Fracturing Operations Well Construction and Integrity Guidelines API GUIDANCE DOCUMENT HF1 FIRST EDITION, OCTOBER 2009 Hydraulic Fracturing Operations Well Construction and Integrity Guidelines
More information4D reservoir simulation workflow for optimizing inflow control device design a case study from a carbonate reservoir in Saudi Arabia
4D reservoir simulation workflow for optimizing inflow control device design a case study from a carbonate reservoir in Saudi Arabia O. Ogunsanwo, 1* B. Lee, 2 H. Wahyu, 2 E. Leung, 1 V. Gottumukkala 1
More informationAWWA Butterfly Valve Operation and Maintenance Manual Series 511A & 510A 20 and Smaller
January 2013 AWWA Butterfly Valve Operation and Maintenance Manual Series 511A & 510A 20 and Smaller Milliken Valve Company 190 Brodhead Avenue, Suite 100 Bethlehem, PA 18017 Phone: (610) 861-8803 Fax:
More informationAn introduction to Reverse Circulation drilling
An introduction to Reverse Circulation drilling Reverse Circulation, or RC, drilling is a fast and cost efficient method of retrieving high quality samples from exploration and mine drilling. The system
More informationCasing Wiper Plugs and Darts
Casing Wiper Plugs and Darts Cement integrity starts here. There is more to cementing a well than just cement. Offering you more engineering expertise and more technology with more reliability than anyone
More informationPulverized Coal Pipe Testing and Balancing
Pulverized Coal Pipe Testing and Balancing By Richard F. (Dick) Storm, PE The first step in optimizing combustion system performance is balancing the air and fuel flowing through each of the plant's coal
More informationSAMPLE TEST QUESTIONS STEAMFITTER/PIPEFITTER - ITA WEBSITE
1 Which tool is used to correct internal hi-low when preparing a 4-in. steel pipe for welding? A. 4-in. grinder with cutting disc. B. Mini-grinder with flapper disc. C. Pencil grinder with cone stone.
More informationWATER VALVE OWNER S MANUAL 004-027-8742-00 REV051811
WATER VALVE OWNER S MANUAL 004-027-8742-00 REV051811 295 East Corporate Place Suite 100 Chandler, AZ 85225 Toll Free: 1.800.621.5886 Phone: 480.893.7607 Fax: 480.753.3397 Paramount@1Paramount.com www.1paramount.com
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationINGROUND, ROPED, AND HOLELESS JACK SEAL REPLACEMENT
D. L. Martin Company INGROUND, ROPED, AND HOLELESS JACK SEAL REPLACEMENT TYPICAL HYDRAULIC JACK HEAD ASSEMBLY 1 TOOLS REQUIRED: 1) Container to hold hydraulic fluid. 2) Clean rags and protective covers
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More information! WARNING. McDonnell & Miller Installation & Maintenance Instructions MM-217(I) Series 150S and 157S (Snap Switch, All Models except 157S-RB-P)
Series 150S and 157S (Snap Switch, All Models except 157S-RB-P) Low Water Cut-Off/Pump Controllers For Steam Boilers and Other Level Control Applications McDonnell & Miller Installation & Maintenance Instructions
More informationglobe reactions made easy Process perfection
globe reactions made easy Process perfection Benefits More reactions in less time: The Globe oil drain unit and quick clamp allow single hand vessel changes in seconds Space saving: 50ml, 100ml, 250ml,
More informationPerforating Basics. How the perforating processes work. George E. King Engineering GEKEngineering.com 3/14/2009 1
Perforating Basics How the perforating processes work 3/14/2009 1 Perforating Methods 1. The vast majority of all perforating work is performed with shaped charge or jet perforating charges. 2. Bullet
More informationCHROME FRONT BRAKE MASTER CYLINDER KIT
-J075 REV. 009-0-0 CHROME FRONT BRAKE MASTER CYLINDER KIT GENERAL Kit Number 5-99D, 5-99D Models These Chrome Master Cylinder Kits are designed to replace the original equipment front brake master cylinder
More informationCHAPTER 4 WELL COMPLETION AND MAINTENANCE
CHAPTER 4 WELL COMPLETION AND MAINTENANCE Section 1: Disinfection. (a) Each person who repairs, modifies, works on, or otherwise affects the physical components of a well shall clean and disinfect the
More informationCoolflo Safe Touch Shower Mixing Valve ST20015CP
Coolflo Safe Touch Shower Mixing Valve ST20015CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationCase Study of Emergency Disconnect Sequence in the Gulf of Mexico
Case Study of Emergency Disconnect Sequence in the Gulf of Mexico Trent Fleece Subsea BOP Operations Team Lead May 8, 2015 Case Study of Emergency Disconnect Sequence in Gulf of Mexico Industry Standards
More informationRAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description
Worldwide Contacts www.tyco-fire.com RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description The TYCO RAPID
More information