Information material PREVENTION OF HAND INJURIES
|
|
- Alicia Wood
- 7 years ago
- Views:
Transcription
1 S1 Information material HSEQ
2 Work safely or do not work at all Work may only be started after Noordgastransport has granted permission. Read your work permit carefully and check that the risk-control measures described in it are indeed in place. Then take the risk-control measures required for the job you are going to undertake. Since the first successful well on the Dutch continental shelf in 1970, Noordgastransport B.V. has grown into one of the largest transporters of natural gas extracted offshore. The company has ample expertise and experience and is continuously working towards the development of new techniques and improved methods. In doing so, safety always takes priority. Noordgastransport, therefore, wants all its employees, contractors and suppliers to pay the utmost attention to what we mean with putting safety first and expects them to make a conscious contribution toward it. Stay alert on the job. If in doubt: ask. Do not start the job or, if you have already started, stop! 2
3 High-risk situations sharp tools, materials and objects; heavy objects and objects that are difficult to handle; moving plant- or machinery components; contact with hot or cold objects; contact with hazardous substances; applying force to tools as a result of which they slip suddenly; manually manipulating a load suspended from a crane. Types of hand incidents cuts; crushes; bruises; fractures; burns. Preventing injuries to your hands Injuries to the wrists, hands and fingers account for a large proportion of all injuries. To prevent such injuries, you must at all times be aware of the hazards of the work you do. Always wear the gloves prescribed for the job in your work permit. 3
4 Possible causes of injuries use of incorrect or unsuitable tools; insufficient space to use the tools prescribed for the job; inattention; wearing jewellery; inadequate assessment of the risks; inexperience; haste (working against the clock); changing working conditions; use of incorrect gloves; failure to observe the hands off policy when working with cranes. Preventing injuries Ask yourself whether you and your colleagues are sufficiently experienced for the job. Always prepare each job very carefully. Preparations Assess the risks and hazards in advance. Then convince yourself that the procedure is indeed the correct one for doing the job safely: toolbox meeting; inspection of workplace; discuss work permit and/or TRA. Before you start Do not wear any jewellery or loose clothing. Always use the right tools to ensure that your hands, wrists and arms are not subject to a heavier load than necessary. Make sure that the tools and materials to be used are in good condition and can be used correctly at the workplace and/or in the work situation. Do not start the job if you do not fully understand the situation. Switch off the current while repairing and/or cleaning electrical tools. 4
5 While the job is in progress Stop the job in case of unsafe situations and report it to the operator. Never rush a job or work against the clock. Be alert to any work others may be doing in your immediate vicinity. Stop your work if there is a change in the working conditions. Never improvise. Immediately replace any defective tool. Personal protective equipment Gloves that offer protection against all hazards have not yet been invented. Therefore, always choose the correct type of glove for the job you are about to do. Make sure that they fit properly and check them regularly for damage or wear. If you are handling chemicals, remember that your gloves will have only a limited lifetime. Gloves that become contaminated with chemicals, must be replaced every day. Attention: when working with rotating parts, the wearing of gloves may represent an additional hazard! If you have any questions or require further information, you can always ask the person in charge. 5
6 2012 Noordgastransport BV Einsteinlaan 10 P.O Box AL Zoetermeer The Netherlands Tel (0) Fax + 31 (0) Noordgastransport BV Middenweg VG Uithuizen The Netherlands Tel (0) Fax + 31 (0)
PREVENTION OF HAND INJURIES
S1 PREVENTION OF HAND INJURIES HSEQ Work safely or do not work at all Work may only be started after GDF SUEZ has granted permission. Read your work permit carefully and check that the risk-control measures
More informationHEALTH AND SAFETY REDUCING ACCIDENTS IN KITCHENS
HEALTH AND SAFETY REDUCING ACCIDENTS IN KITCHENS HEALTH & SAFETY UNIT SPRING 2006 CONTENTS 1. WHAT CAUSES ACCIDENTS?...2 2. WHO GETS INJURED?...2 3. SLIPS...2 4. TRIPS...3 5. SCALDS AND BURNS...3 6. MACHINERY
More informationMD 52 WASTE MANAGEMENT AUTHORITY CORPORATE HEALTH AND SAFETY PROGRAM
UNSAFE ACTS AND CONDITIONS All accidents are the result of an unsafe act, an unsafe condition or a combination of both. Unsafe acts account for approximately 80% of all incidents/accidents, while unsafe
More informationHAZARD & RISK MANAGEMENT PROCEDURE
Introduction ATTAR is committed to providing a safe and healthy work environment for all employees. ATTAR also recognises its legal and moral obligation to provide and uphold so far as is practicable,
More informationMACHINERY GUARDING. Your Practical Guide
MACHINERY GUARDING Your Practical Guide WELCOME TO AXA Introducing AXA One of the world s largest insurers With more than 50 million customers across the globe, AXA is one of the world s largest financial
More informationRISK RATING SAFE WORK METHOD STATEMENT 1 HIGH 2 MEDIUM 3LOW. I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager
RISK RATING 1 HIGH 2 MEDIUM 3LOW SAFE WORK METHOD STATEMENT Title: : Gantry Crane Operation Ref No: 1 I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager SIGNATURE:
More informationMachine Guarding and Operator Safety. Leader Guide and Quiz
4646 Machine Guarding and Operator Safety Leader Guide and Quiz Leader s Guide MACHINE GUARDING & OPERATOR SAFETY INTRODUCTION: A brief description of the program and the subject that it addresses. This
More informationA short guide to the Personal Protective Equipment at Work Regulations 1992
A short guide to the Personal Protective Equipment at Work Regulations 1992 Health and Safety A short guide to the Personal Protective Equipment at Work Regulations 1992 Employers have basic duties concerning
More informationCAER Construction and Environmental Resource
CAER Construction and Environmental Resource OLD COLONY HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy INTRODUCTION Safety is everybody's concern and is always an important consideration
More informationHazard Management Tool
Developed by the Health and Safety Ontario members: Infrastructure Health and Safety Association Public Services Health & Safety Association Workplace Safety North Workplace Safety & Prevention Services
More informationGeneral Requirements for Road Transport Carriers. www.shell.com/chemicals/transport
General Requirements for Road Transport Carriers www.shell.com/chemicals/transport Version 10 February 2012 Please always refer to these general requirements details in combination with any specific s
More informationThe Fort McMurray Catholic Board of Education is committed to the protection of our employees, contractors, volunteers and the students we serve.
Fort McMurray Catholic Schools Operating Policies and Procedures OP 150 Occupational Health & Safety Policy The Fort McMurray Catholic Board of Education is committed to the protection of our employees,
More informationEmployee s Report of Injury Form
Employee s Report of Injury Form Instructions: Employees shall use this form to report all work related injuries, illnesses, or near miss events (which could have caused an injury or illness) no matter
More informationActivity risk assessment Assessment title: New Generic Office environment
Activity risk assessment Assessment title: New Generic Office environment Assessment N o Location: CASS (Generic Assessments) 159838 Local Rules & Procedures for completing Risk Assessments I Confirm I
More informationOH&S Management Systems Audit Checklist (NAT, E3)
3.1.2 3.1.1 Introduction OH&S Management Systems Audit Checklist (NAT, E3) This audit checklist is based on Element 3 (Implementation) of the National Self-Insurers OHS Audit Tool. For a full copy of the
More informationA 5 STEP GUIDE. for employers, workers and their representatives on conducting workplace risk assessments. International Labour.
A 5 STEP GUIDE for employers, workers and their representatives on conducting workplace risk assessments International Labour Office Geneva A 5 STEP GUIDE for employers, workers and their representatives
More informationExample risk assessment: Charity shop
Example risk assessment for a charity shop Setting the scene The manager carried out the risk assessment in this charity shop, which is located on a busy high street. It sells clothing, books and other
More informationHealth and Safety Resources Caution to Users
Health and Safety Resources Caution to Users Many of the resources in this archive were originally prepared by WSN s predecessor organizations for use by industry clients. While much of the information
More informationFALLING OBJECTS EXCESSIVE NOISE CHAINSAW & CHIPPER WORK AT HEIGHTS MANUAL HANDLING
JOB NO: PROJECT: DATE: SWMS NO: SWMS 001.1 PREPARED BY: Ian Hartley REVISED BY: Nick Bragg & Cameron McNeil ACTIVITY: TREE REMOVAL & PRUNING SIGNED BY: REVISION DATE: December 2015 MINIMUM PERSONAL PROTECTIVE
More informationCOMPENDIUM OF TYPICAL HAZARDS ASSOCIATED WITH CNC MILLING AND THEIR CONTROL MEASURES IN THE CONSTRUCTION INDUSTRY CNC MILLING
COMPENDIUM OF TYPICAL HAZARDS ASSOCIATED WITH CNC MILLING AND THEIR CONTROL MEASURES IN THE CONSTRUCTION INDUSTRY CNC MILLING No. Hazards Possible Control Measures Useful Links/Tips 1.1 Loose mounting
More informationOccupational Health & Safety Practitioner. Reading PRINCIPLES OF ACCIDENT PREVENTION
Occupational Health & Safety Practitioner Reading PRINCIPLES OF ACCIDENT PREVENTION January 2009 Contents OVERVIEW...1 SECTION 1: INTRODUCTION...1 SECTION 2: TECHNIQUES FOR ACCIDENT PREVENTION...4 SECTION
More informationGuidance for Manual Handling of Gas Cylinder
Guidance for Manual Handling of Gas Cylinder The Manual Handling Operations Regulations 1992 (updated 1998) came into force in January 1993. The purpose of the regulations is to reduce the risk of injury
More information[Type text] What is the probability of an accident happening? Task, activity or environment being assessed
Task, activity or environment being assessed Deliveries Urns Deep Fat Fryer Deep Fat Fryer (cleaning whilst hot) Deep Fat Fryer (filling emptying) Boiling Pans (Bulk) What are the hazards or dangers? Slips,
More informationConstruction OS&H Working at height
Construction OS&H Working at height Summary Common hazards with working at height General OS&H requirements when working at height Scaffolding Structural frames Demolition of above ground structures Roof-work
More informationIN CASE OF EMERGENCY. Emergency Telephone Number 112
IN CASE OF EMERGENCY Emergency Telephone Number 112 Police, Fire, Ambulance Dial 112 in case of fire, medical emergency, serious or life threatening traffic or other accident. Tell the operator: What has
More informationTEMPORARY EMPLOYEES SAFETY PROCEDURES
TEMPORARY EMPLOYEES SAFETY PROCEDURES Temporary Agencies will ensure that any temporary employee sent to work at Modern will have received and understand the General Safety Rules. GENERAL SAFETY RULES
More informationA Short Guide to The Safety, Health and Welfare at Work Act, 2005
A Short Guide to The Safety, Health and Welfare at Work Act, 2005 3 A Short Guide to the Safety, Health and Welfare at Work Act, 2005 Published in August 2005 by the Health and Safety Authority, 10 Hogan
More informationtips How smallchangescan saveyou big, &
warehousesafety tips How smallchangescan saveyou big preventaccidentsreduceinjuries, & increaseproductivity.. Table of Contents Welcome Statement...4 Safety Policy Statement...5 Guiding Principles...6
More informationRisk management a practical approach
Risk management a practical approach Introduction Preventing work related accidents and injuries is the primary concern for all those involved in health and safety. Work related accidents and injuries
More informationSAFE USE OF LIFTING EQUIPMENT
Golden Rule 6 Mechanical Lifting SAFE USE OF LIFTING EQUIPMENT Do not operate any lifting equipment unless It has been approved for use The lift has been assessed by a competent person The load has been
More informationSchool of Engineering University of Glasgow
School of Engineering University of Glasgow Electronics Workshops Rankine Building 319A (2 Technicians) 510 (1 Technician) 712A (4 Technicians, 1 Modern Apprentice) James Watt South 619 (2 Technicians)
More informationCORPORATE GUIDANCE ON ACCIDENT REPORTING AND ACCIDENT INVESTIGATION
CORPORATE GUIDANCE ON ACCIDENT REPORTING AND ACCIDENT INVESTIGATION SUMMARY PAGE Introduction As an employer the Council has responsibilities to record all workplace accidents/incidents and to report specific
More informationGuidance on Lifting Operations in Construction When Using Excavators
Guidance on Lifting Operations in Construction When Using Excavators Working in Partnership 1. Introduction The use of excavators for lifting operations, particularly on construction sites, has become
More informationSafety in Offices and other General Areas
Safety in Offices and other General Areas 1. INTRODUCTION This document covers health and safety in offices and other 'general areas' including corridors, stairs, entrances, small kitchens and rest areas.
More informationConstruction Safety Guidelines
Construction Safety Guidelines Your safety is the primary concern on the job site. You should be cautious at all times and ask questions if you are unsure about any situation. Since Habitat work crews
More informationSafety Training Topic PERSONAL PROTECTIVE EQUIPMENT
Safety Training Topic PERSONAL PROTECTIVE EQUIPMENT Purpose of Meeting To remind workers that using personal protective equipment (PPE) can protect them from serious injury. To reince PPE safety rules.
More informationGEORGIA INSTITUTE OF TECHNOLOGY ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT
PURPOSE To protect the health and welfare of GEORGIA TECH employees in areas where there may be a risk of injury or exposure to hazardous substances or conditions employees who work in areas where physical
More informationLOCKOUT GUIDELINE. To ensure that a piece of equipment cannot be turned on, pressurized or switched on accidently while an employee is working on it.
Background LOCKOUT GUIDELINE Both Aspasa in its ISHE (Initiating Safety Health & Education) program and Sarma in its SHREQ (Safety, Health, Road Transport, Environment & Quality) program have seen that
More informationEntry Level Award in Workplace Hazard Awareness
Entry Level Award in Workplace Hazard Awareness Student resource sheets www.britsafe.org Membership Training Qualifications Audit and Consultancy Audit and Policy Consultancy and Opinion Policy Awards
More informationDeveloping a better you. Heavy Lifting and Injury Prevention
Heavy Lifting and Injury Prevention A guide to prevent heavy lifting injuries in the workplace 2010 Concentra Operating Corporation All Rights Reserved Before you lift a heavy object, answer these questions:
More informationE3902 Seeing Accidents Before They Happen Leader s Guide
E3902 Seeing Accidents Before They Happen Leader s Guide ERI PRODUCTIONS INC. SEEING ACCIDENTS BEFORE THEY HAPPEN This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
More informationPOTENTIAL HEALTH & SAFETY HAZARDS
Number: OH&S 18.27.1 Revision Date: 2014.01.28 Crane Safety Procedures 1. PURPOSE 1.1. These procedures provide the University requirements for the operation and management of overhead travelling cranes
More informationFive steps to risk assessment
This leaflet aims to help you assess health and safety risks in the workplace A risk assessment is an important step in protecting your workers and your business, as well as complying with the law. It
More information7 Principles of Lean Supplies
7 Principles of Lean Supplies Simple changes make a big impact Our thanks to Kimberly-Clark for allowing us to reprint the following article. Lean supplies: a hidden opportunity Lean has transformed manufacturing
More informationCleaning of Laboratories
Cleaning of Laboratories Introduction Within the University cleaning staff are usually provided by Support Services Division of the Estates and Buildings Department, but arrangements may vary on different
More informationSix steps to Occupational Health and Safety
Six steps to Occupational Health and Safety This booklet gives basic guidelines for workplace health and safety systems to help industry in NSW comply with the "duty of care" principle outlined in the
More information3 WATT LED SPOTLIGHT Model No. SLM - 3801
3 WATT LED SPOTLIGHT Model No. SLM - 3801 OWNER'S MANUAL Customer Service Tel: 1-800-268-3319 Superex Canada Ltd, Toronto,M2H 3B8 Made in China Table of Contents A). Important Safety Instructions B). Charging
More informationSPILL RESPONSE PROCEDURE
SPILL RESPONSE PROCEDURE Queen's University Spill Response Procedure May 2000 1 SOP-HAZMAT-01 1.0 Preamble This document outlines emergency spill response procedures as part of the overall Queen's University
More information1000-LB. TRAILER JACK OWNER S MANUAL
1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationPOLICY ON OCCUPATIONAL HEALTH AND SAFETY RISK MANAGEMENT
THE NORTHCOTT SOCIETY POLICY ON OCCUPATIONAL HEALTH AND SAFETY RISK MANAGEMENT VOLUME: 2 Policy on Management and Organisational Issues SECTION: B Occupational Health & Safety & Workers Compensation SUB-SECTION:
More informationPERSONAL PROTECTIVE EQUIPMENT POLICY & GUIDANCE
Health and Safety Policy PERSONAL PROTECTIVE EQUIPMENT POLICY & GUIDANCE ROYAL FREE HOSPITAL NHS TRUST & SCHOOL OF MEDICINE CONTENTS 1. SUMMARY OF THE REGULATIONS 2. INTRODUCTION 3. DEFINITION OF PERSONAL
More informationHow to Manage Hazards
How to Manage Hazards FOR ROAD TRANSPORT If you are thinking about improving the health and safety of your workplace, hazard management is a good place to start. Why should you do this thing called hazard
More informationCurtain Guards Made of PVC and designed to protect the operator from the risk of airborne chips or tool fragments.
Two General Safety Rule for CNC Machines Never operate a CNC machine without proper training or consulting the specific operator's manual for that particular machine and control type. Never attempt to
More informationPolicy: Accident & Injury Reporting Category: Operations. Authorized by: Joan Arruda, CEO
Category: Operations Authorized by: Pages: 11 Date effective: Dec. 15, 2010 To be revised: Dec. 15, 2013 Revised: May 9, 2011 Joan Arruda, CEO POLICY This Policy and Procedure is intended to bring consistency
More informationMANUAL HANDLING POLICY
Northumberland Street Alnwick Northumberland NE 66 1 LT Tel: 01665 510 241 MANUAL HANDLING POLICY Designated Health and Safety Officer for the above address: Sally Lane (Deputy Manager) It is the responsibility
More informationParallel Circuits Charles Lang
SCIENCE EXPERIMENTS ON FILE Revised Edition 6.20-1 Parallel Circuits Charles Lang Topic Parallel circuits Time 1 1 2 hours! Safety Adult supervision is required. Please click on the safety icon to view
More informationInjury or accident report
Injury or accident report Fill out all fields. Be as specific as possible and include drawings, photos and additional narrative as needed. Facility/location: Incident type: Injury Incident Equipment/property
More informationHealth & Safety Policy DH Associates Limited
General Statement of Policy Health & Safety Policy DH Associates Limited It is the policy of DH Associates Ltd to comply with the terms of the Health and Safety at Work etc Act 1974 and subsequent legislation
More informationDealing with risk. Why is risk management important?
Why is risk management important? Things don t always go according to plan: a company s sales manager changes employment in the middle of an important project, a packaging machine breaks down, a lathe
More informationStandard Operating Procedure (SOP) Car/Truck Battery Safety
INTRODUCTION Lead-acid batteries contain sulfuric acid and only trained and authorized personnel should handle them. When talking about lead-acid batteries, people usually call sulfuric acid "battery acid"
More informationstaple gun with 5/16 Long staples
staple gun with 5/16 Long staples Model 95718 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks
More informationTemporary Worker Safety Checklist
Temporary Worker Safety Checklist The following checklists provide guidance for staffing agencies and employers that hire temporary workers regarding the steps each party should take to ensure it is meeting
More informationExample risk assessment for a motor vehicle mechanical repair workshop
Example risk assessment for a motor vehicle mechanical repair workshop Setting the scene The garage manager did the risk assessment. The business employed 12 mechanics, including two apprentices who carried
More informationOriginator Date Section ID Description of Change Reason for Change
MANAGEMENT PROCEDURE Author : P.D Govender Date of Recommendation: Date of Acceptance: Distribution: -Health & Safety Committee - All Personnel BREEDE VALLEY FIRE & EMERGENCY SERVICES DCN: BVFES/HSE/FSMA/SOP/IRP/2005
More informationNotes. Material 1. Tools the employee is expected to operate
OSHA Standard29 CFR 1910.211-.247, Subpart O, Machinery and Machine Guarding, and Subpart P, Hand and Portable-Powered Tools and other Hand- Held Equipment. Hand Tool Safety Preparation 1. Read Applicable
More informationWelcome to the safe@work Hairdressing Module
Welcome to the safe@work Hairdressing Module Have you read the General Module, completed the test and printed your safe@work General Award of Attainment? The Hairdressing Module should be done AFTER the
More informationStaff Skin Care Policy
This is an official Northern Trust policy and should not be edited in any way Staff Skin Care Policy Reference Number: NHSCT/10/350 Target audience: All Trust staff and in particular those involved in
More informationAre you developing property? A quick guide to your legal responsibilities as a client under the Construction (Design and Management) Regulations 2007
A quick guide to your legal responsibilities as a client under the Construction (Design and Management) Regulations 2007 Who needs to know about the Regulations? Anyone having construction or building
More informationQualification Specification HABC Level 1 Award in Principles of Health and Safety in the Workplace (QCF)
www.highfieldabc.com Qualification Specification HABC Level 1 Award in Principles of Health and Safety in the Workplace (QCF) Qualification Number: 600/6789/5 Highfield House Heavens Walk Lakeside Doncaster
More informationDischarging of Scrap
/ Health & Safety OPERATION STANDARD Ref.: Aperam Safety ST 006 A1 Issue: 15.05.2012 Vers.: v0 Rev.: AM Safety ST 006 -A1 - V0-10.05.2010 Discharging of Scrap Controlled Elaborated by: Checked by: Approved
More informationUnit Title: Unit purpose and aim
Unit Title: Preparing and Operating Telescopic Handlers to Lift and Transfer Loads in the Workplace Level: 2 Credit value: 25 Guided learning hours: 83 Unit expiry date: 31/10/2014 Unit purpose and aim
More informationCompletion Test Answer Key. 1. Why are young people more likely to be injured on the job than other groups of workers?
1. Why are young people more likely to be injured on the job than other groups of workers? They receive little or no safety training or supervision. They are reluctant to ask questions for fear of appearing
More informationCostco Bakery Employee Training Manual
Costco Bakery Employee Training Manual Prepared for Costco Wholesale #684 Prepared by Ondria Arias May 3, 2013 Table of Contents iii Table of Contents Introduction... v Chapter 1: Operating the Equipment...
More informationPersonal protective equipment (PPE) at work A brief guide
Personal protective equipment (PPE) at work A brief guide Introduction This leaflet describes what you, as an employer, may need to do to protect your employees from the risk of injury in the workplace.
More informationUnit Title: Unit purpose and aim
Unit Title: Preparing and Operating Sideloader Forklifts to Lift and Transfer Loads in the Workplace Level: 2 Credit value: 16 Guided learning hours: 53 Unit expiry date: 31/10/2014 Unit purpose and aim
More informationPERSONAL PROTECTIVE EQUIPMENT FOR CALIFORNIA STATE UNIVERSITY, LOS ANGELES
PERSONAL PROTECTIVE EQUIPMENT FOR CALIFORNIA STATE UNIVERSITY, LOS ANGELES OCTOBER 2007 PROGRAM APPROVAL AND AUTHORIZATION James M. Rosser, President Date TABLE OF CONTENTS TITLE Section PURPOSE...1.0
More informationWSD130 SOLDERING STATION
NOTES S2032ACH 8/98 Rev. 11/01 WSD130 SOLDERING STATION 1. Power Switch 2. Digital Display 3. UP Button 4. DOWN Button 5. Optical Regulator, Right 6. Connection for Soldering Iron, Right 7. Selection Switch
More informationGeneric risk assessment form. This document forms part of Loughborough University s health and safety policy Version 3 February 2014
Generic risk assessment form Date: (1) Assessed by: (2) Checked / Validated* by: (3) Location: (4) Assessment ref no (5) Review date: (6) Task / premises: (7) Activity (8) Significant hazard (9) Who might
More informationHealth and Safety Management in Healthcare
Health and Safety Management in Healthcare Information Sheet Nov 2010 This information sheet gives guidance on the key elements of health and safety management in healthcare. It is intended for small employers
More informationFact Sheet: Slips, trips and falls
Fact Sheet: Slips, trips and falls Slips, Trips & Falls Slips, Trips and Falls are one of the highest causes of workplace injuries. They include those, which occur on the same level as a result of uneven
More informationLife Saving Rules. Working Safely at EPCOR
Life Saving Rules Working Safely at EPCOR 1 Our Health and Safety Beliefs We believe: All incidents are preventable. HSE is integral to our work and the way we conduct business. HSE is serious and a shared
More informationLifting equipment at work
Lifting equipment at work A brief guide Introduction This leaflet provides general information about the requirements of the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER). It describes
More informationHAND SAFETY in the WORKPLACE
(6-10) HAND SAFETY in the WORKPLACE Presented By: Safety and Health Council of NC 2709 Water Ridge Parkway Suite 120 Charlotte, NC 28217 (704) 644-4220 www.safetync.org Hand Protection The following topics
More informationRecommendations to improve the safety of existing lifts
Recommendations to improve the safety of existing lifts Lift & Escalator Industry Association Lift Safety an introduction Lifts are amongst the very few modes of transport available for continuous unsupervised
More informationGuidelines for the Use of. Personal Protective Equipment
Guidelines for the Use of Personal Protective Equipment Contents Introduction 1 Key Points on the Proper Use of Personal Protective 2 Equipment Safety Helmets 3 Eye Protectors 4 Ear Protectors 5 Respirators
More informationWork Health and Safety. Seven Steps for Small Business
Work Health and Safety Seven Steps for Small Business Work health and safety (WHS) is a key management responsibility for every small business. South Australia s WHS laws took effect on 1 January 2013.
More informationWORKING IN CONFINED SPACES GUIDELINES
WORKING IN CONFINED SPACES GUIDELINES Contents 1 Introduction... 2 2 Scope... 2 3 Definitions... 2 4 Responsibilities... 3 4.1 Permit Authoriser... 3 4.2 Permit Receiver... 3 4.3 Responsible UOW Officer...
More informationBSH Exhibition Sample Risk Assessment for exhibitors / contractors
BSH Exhibition Sample Risk Assessment for exhibitors / BSH Conferences Ltd have produced this risk assessment for its exhibitors to use as a template if they have not undertaken risk assessment before.
More informationAnnual Report on Accident Statistics and Analyses for Public Works Contracts 2014
Annual Report on Accident Statistics and Analyses for Public Works Contracts 2014 This report provides a summary of the accident statistics and analysis of the accidents occurred in public works construction
More informationTech Shop Safety Level 2 - FN000425. Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258)
Tech Shop Safety Level 2 - FN000425 Tech Shop / Tool Safety Operations (Fermilab machines not covered in course FN000258) Table of Contents Tech Shop / Tool Safety Operations 3 General Rules of Safety
More informationHow to manage health and safety in small businesses
How to manage health and safety in small businesses Do I need to read this? Are you a self-employed person? Do you own a business and employ staff or contractors? Do you want some influence over your ACC
More information2-SLICE COOL TOUCH TOASTER
2-SLICE COOL TOUCH TOASTER PLA0405 Instruction Manual Due to on-going product improvements, specifications and accessories may change without notice. Actual product may differ slightly to that depicted.
More informationSafety Resources from
Safety Resources from Sample Safety Program TABLE OF CONTENTS I. DECLARATION OF POLICY II. DUTIES AND RESPONSIBILITIES III. SAFETY COMMITTEE IV. PROGRAM REINFORCEMENT V. CORPORATE DRUG POLICY VI. HAZARD
More informationINCIDENT REPORTING POLICY
INCIDENT REPORTING POLICY Revised April 2011 1 Incident Reporting Policy Introduction This policy has been developed to detail the standards to be applied following an accident or incident at Northumbria
More informationExamples of pressure systems and equipment are:
Pressure systems A brief guide to safety Introduction Pressure systems A brief guide to safety If pressure equipment fails in use, it can seriously injure or kill people nearby and cause serious damage
More informationFive steps to risk assessment
This leaflet aims to help you assess health and safety risks in the workplace A risk assessment is an important step in protecting your workers and your business, as well as complying with the law. It
More informationHealth and Safety Policy Part 1 Policy and organisation
Health and Safety Policy Part 1 Policy and organisation ICO H&S Policy Policy and organisation, June 2014 Page 1 of 6 1. Scope 1.1 The Health and Safety policy applies to all employees of the Information
More informationShaw Limited Lifetime Stain Warranty
Shaw Limited Lifetime Stain Warranty Who is covered This warranty protects you, the original purchaser, if you have purchased a Shaw Industries carpet covered under this warranty for your own residential
More informationBiomedical Engineering Technologist II. Total Points Rating 5 4 3 5 5 4 4 5 4 Points 233 67 19 24 150 87 83 107 43 813
Job Class Profile: Biomedical Engineering Technologist II Pay Level: CG-36 Pay Band: 790-813 Accountability & Decision Making Development and Leadership Environmental Working Conditions Factor Knowledge
More informationPollution Incident Response Plan
Pollution Incident Response Plan Introduction Schmidt Quarries is committed to ensuring all aspects of our quarrying activities comply with the environmental legislative requirements in NSW. This Pollution
More information