DI-PA-24V24W-W (White) DI-PA-24V24W-B (Black)

Transcription

1 24V PLUG-IN ADAPTERS DRY LOCATION 24V DC SPECIFICATION SHEET SPECIFICATIONS DI-PA-24V12W-W (White) DI-PA-24V12W-B (Black) DI-PA-24V24W-W (White) DI-PA-24V24W-B (Black) DI-PA-24V48W-W (White) DI-0967 (Black) DI-PA-24V96W-W (White) DI-0955 (Black) Voltage / Frequency 100~240VAC at ~50/60Hz Input Efficiency 70% 70% 70% 70% Wire or Terminal Connection Two-prong AC Voltage (Full Load) 24VDC ± 5% Max Current.5A 1A 2A 4A Output Power (Wattage) 12W 24W 48W 96W Connection Type Male DC coaxial (outside dia. x inside dia.). See mechanical diagrams for cord lengths # Output Connections 1 Ambient Temperature ¹ 32 ~ +104 F (0 ~+40 C) Operating Temperature ² 32 ~ 130 F (0 ~ 54 C) Environment Location Suitable for indoor/dry locations Working Humidity 5~90% RH, non-condensing Class 2 Compliant Yes Housing / Cooling Cooling by free-air convection Certifications Dimmable culus (US & Canada) Listed, UL #E (all models except 96W Black & 48W Black) culus (US & Canada) Listed, UL #E (96W Black & 48W Black) Yes, with compatible PWM dimmer. Do not install more than 1 PWM dimmer or color controller per adapter Additional Information Minimum Load No minimum load required Maximum Load For maximum longevity load the adapter no more than 80% the labeled load Dimensions 1.75 x 1.4 x 2.35 in. ( L x D x H ) 1.75 x 1.4 x 3.8 in. ( L x D x H ) 1.75 x 1.4 x 3.8 in. (White) 4.7 x 2 x 1.25 in. (Black) ( L x W x H ) 6.8 x 2.5 x 1.6 in. (White) 5.5 x 2.4 x 1.4 in. (Black) ( L x W x H ) Weight 3 oz. 8 oz. 10 oz. 8 oz. Warranty 1 year Note ¹ Note ² Do not install product in an environment outside the listed ambient temperature. Exceeding the maximum ambient temperature will reduce the life expectancy of the power supply and void the warranty. Operating temperature is measured according to the minimum and maximum ambient temperature environment. Item #: Project: 1 OF 5 SS

2 MECHANICAL DIAGRAMS 12W Models DI-PA-24V12W-W (White) DI-PA-24V12W-B (Black) 2.35 in in. 1.4 in. DC Cord 70 in. 24W & 48W Models DI-PA-24V24W-W (White) DI-PA-24V24W-B (Black) DI-PA-24V48W-W (White) 3.8 in in. 1.4 in. DC Cord 70 in. 48W Model DI-0967 (Black) 2 in. 4.7 in in. 2 OF 5 SS

3 MECHANICAL DIAGRAMS 96W Model DI-PA-24V96W-W (White) 2.5 in. 1.6 in. 6.8 in. 96W Model DI-0955 (Black) 2.4 in. 5.5 in. 1.4 in. 3 OF 5 SS

4 DC PLUG ACCESSORIES* Item #* Item Name Description Image DI-0712F-** Female Adapter Splice Cable Converts Male DC plug to hard-wire connection. Wire: 18/2 AWG. 42 x 0.45 in. (L x Dia) DI-0712M-** Male Adapter Splice Cable Converts Female DC plug to hard-wire connection. Wire: 18/2 AWG. 42 x 0.45 in. (L x Dia) DI-0708-** 39 Inch DC Extension Cable Creates an extension between any fixture or accessory that features DC plugs. Wire: 18/2 AWG x 0.45 in. (L x Dia) DI-0720-** DI-0705-** DI-DCSP4-** DI-0707-** 2-Way 3-Way 4-Way 5-Way DC Splitter Plug Splits a Male DC plug to multiple Male DC plugs. Wire: 22/2 AWG. 8 x 0.5 in. (L x Dia) DI-0710F-** DI-0710M-** Female Male Wet Location Plug to DC Plug Connector Converts a Male DC plug to a Male or Female Wet Location Plug. Wire: 22/2 AWG. 6 x 0.45 in. (L x Dia.) * All DC plug accessories have a Class 2 amp rating: 12VDC; 24VDC. ** Available in 25x and 50x bulk quantities. Add -25 or -50 to each SKU. SWITCHES & DIMMERS Our DC Inline switch and control portfolio is consistently updated. For compatible controls please see the DC In-Line Switches & Dimmers section of our latest catalog or visit our web site. 4 OF 5 SS

5 ADDITIONAL RESOURCES Visit the online product page at for additional resources including: Voltage Drop Charts Use to specify appropriate wire gauge for installation. Available at the Tools & Resources page at SAFETY & DISCLOSURES Install in accordance with the National Electric Code, and local regulations. This product is intended to be installed and serviced by a qualified, licensed electrician. Only install compatible LED fixtures & controls. Only use copper wiring. Proper heat dissipation will prolong the working lifespan of this product. Install in a well-ventilated area free from explosive gases and vapors. Ensure applicable wire is installed between driver, fixture, and any controls in between. When choosing wire, factor in voltage drop, amperage rating, and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overheat wires, and cause a fire. Do not install if product has any visible damage. Do not modify or disassemble this product beyond instructions or the warranty will be void. WARRANTY INFORMATION Limited Warranty This power supply has a one (1) year limited warranty from the date of shipment. This warranty does not include the additional accessories referenced in this specification sheet. Complete warranty details for fixtures and additional accessories are available at under the Tools & Resources tab. For warranty related questions, please contact technical support. Consumer s Acknowledgment Diode LED stands behind its products when they are used properly and according to our specifications. By purchasing our products, the purchaser agrees and acknowledges that lighting design, configuration and installation is a complex process, wherein seemingly minor factors or changes in layout and infield adjustments can have a significant impact on an entire system. Choosing the right components is essential. Diode LED is able to work with the original purchaser to make an appropriate product selection to the extent of the limited information that the customer can provide, but it is virtually impossible for Diode LED to design a system that foresees every unknown factor. For this reason, this Warranty does not cover problems caused by improper design, configuration or installation issues. Any statement from a Diode LED employee or agent regarding a customer s bill of goods and/or purchase order is NOT an acknowledgment that the products purchased are designed and configured correctly. The purchaser agrees and acknowledges that it is the customer s responsibility to adhere strictly to all information contained in the Product Specification Sheets. There is often more than one way to design, configure and layout an LED lighting application properly to achieve the same lighting effect. Diode LED strongly recommends that licensed professionals be used in the design and installation of lighting systems that include Diode LED products. The specifications include important information that a designer and installer should carefully review and strictly follow. Qualified designers and certified and/or licensed installers, with access to the final installation environment, customer goals, and Diode LED product specifications can make the requisite decisions appropriate for a successful finished lighting application. Toll Free: Fax: info@diodeled.com 2014 Elemental LED, Inc. dba Diode LED. All rights reserved. Specifications are subject to change without notice. 5 OF 5 SS